--- a/nl80211.h
+++ b/nl80211.h
-@@ -118,8 +118,9 @@
- * to get a list of all present wiphys.
- * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
- * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
-- * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
-- * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT,
-+ * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the
-+ * attributes determining the channel width; this is used for setting
-+ * monitor mode channel), %NL80211_ATTR_WIPHY_RETRY_SHORT,
- * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
- * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
- * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
-@@ -169,9 +170,10 @@
- * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
- * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
- * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
-- * %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT.
-+ * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
-+ * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
- * The channel to use can be set on the interface or be given using the
-- * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_CHANNEL_TYPE attrs.
-+ * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width.
- * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
- * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
- * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
-@@ -373,8 +375,8 @@
- * requests to connect to a specified network but without separating
- * auth and assoc steps. For this, you need to specify the SSID in a
+@@ -303,8 +303,9 @@
+ * passed, all channels allowed for the current regulatory domain
+ * are used. Extra IEs can also be passed from the userspace by
+ * using the %NL80211_ATTR_IE attribute.
+- * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT
+- * if scheduled scan is not running.
++ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
++ * scheduled scan is not running. The caller may assume that as soon
++ * as the call returns, it is safe to start a new scheduled scan again.
+ * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
+ * results available.
+ * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
+@@ -418,8 +419,18 @@
* %NL80211_ATTR_SSID attribute, and can optionally specify the association
-- * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
-- * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
-+ * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
-+ * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
- * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
- * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
+ * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
+ * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
+- * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
+- * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
++ * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
++ * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and
++ * %NL80211_ATTR_WIPHY_FREQ_HINT.
++ * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are
++ * restrictions on BSS selection, i.e., they effectively prevent roaming
++ * within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT
++ * can be included to provide a recommendation of the initial BSS while
++ * allowing the driver to roam to other BSSes within the ESS and also to
++ * ignore this recommendation if the indicated BSS is not ideal. Only one
++ * set of BSSID,frequency parameters is used (i.e., either the enforcing
++ * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict
++ * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).
* Background scan period can optionally be
-@@ -401,8 +403,7 @@
- * a response while being associated to an AP on another channel.
- * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus
- * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
-- * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
-- * optionally used to specify additional channel parameters.
-+ * frequency for the operation.
- * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds
- * to remain on the channel. This command is also used as an event to
- * notify when the requested duration starts (it may take a while for the
-@@ -440,12 +441,11 @@
- * as an event indicating reception of a frame that was not processed in
- * kernel code, but is for us (i.e., which may need to be processed in a
- * user space application). %NL80211_ATTR_FRAME is used to specify the
-- * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and
-- * optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on
-- * which channel the frame is to be transmitted or was received. If this
-- * channel is not the current channel (remain-on-channel or the
-- * operational channel) the device will switch to the given channel and
-- * transmit the frame, optionally waiting for a response for the time
-+ * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ is used
-+ * to indicate on which channel the frame is to be transmitted or was
-+ * received. If this channel is not the current channel (remain-on-channel
-+ * or the operational channel) the device will switch to the given channel
-+ * and transmit the frame, optionally waiting for a response for the time
- * specified using %NL80211_ATTR_DURATION. When called, this operation
- * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
+ * specified in %NL80211_ATTR_BG_SCAN_PERIOD,
+ * if not specified default background scan configuration
+@@ -492,6 +503,9 @@
* TX status event pertaining to the TX request.
-@@ -473,8 +473,8 @@
- * command is used as an event to indicate the that a trigger level was
- * reached.
- * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
-- * and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed
-- * by %NL80211_ATTR_IFINDEX) shall operate on.
-+ * and the attributes determining channel width) the given interface
-+ * (identifed by %NL80211_ATTR_IFINDEX) shall operate on.
- * In case multiple channels are supported by the device, the mechanism
- * with which it switches channels is implementation-defined.
- * When a monitor interface is given, it can only switch channel while
-@@ -513,6 +513,12 @@
- * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
- * more background information, see
- * http://wireless.kernel.org/en/users/Documentation/WoWLAN.
-+ * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification
-+ * from the driver reporting the wakeup reason. In this case, the
-+ * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason
-+ * for the wakeup, if it was caused by wireless. If it is not present
-+ * in the wakeup notification, the wireless device didn't cause the
-+ * wakeup but reports that it was woken up.
+ * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
+ * management frames at CCK rate or not in 2GHz band.
++ * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA
++ * counters which will be updated to the current value. This attribute
++ * is used during CSA period.
+ * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
+ * command may be used with the corresponding cookie to cancel the wait
+ * time if it is known that it is no longer necessary.
+@@ -1514,10 +1528,10 @@ enum nl80211_commands {
+ * operation).
+ * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
+ * for the time while performing a channel switch.
+- * @NL80211_ATTR_CSA_C_OFF_BEACON: Offset of the channel switch counter
+- * field in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
+- * @NL80211_ATTR_CSA_C_OFF_PRESP: Offset of the channel switch counter
+- * field in the probe response (%NL80211_ATTR_PROBE_RESP).
++ * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel
++ * switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
++ * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel
++ * switch counters in the probe response (%NL80211_ATTR_PROBE_RESP).
*
- * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver
- * the necessary information for supporting GTK rekey offload. This
-@@ -526,6 +532,12 @@
- * of PMKSA caching dandidates.
+ * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32.
+ * As specified in the &enum nl80211_rxmgmt_flags.
+@@ -1555,6 +1569,31 @@ enum nl80211_commands {
+ * data is in the format defined for the payload of the QoS Map Set element
+ * in IEEE Std 802.11-2012, 8.4.2.97.
*
- * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
-+ * In addition, this can be used as an event to request userspace to take
-+ * actions on TDLS links (set up a new link or tear down an existing one).
-+ * In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested
-+ * operation, %NL80211_ATTR_MAC contains the peer MAC address, and
-+ * %NL80211_ATTR_REASON_CODE the reason code to be used (only with
-+ * %NL80211_TDLS_TEARDOWN).
- * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame.
- *
- * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
-@@ -562,8 +574,42 @@
- *
- * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels
- * independently of the userspace SME, send this event indicating
-- * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with
-- * %NL80211_ATTR_WIPHY_CHANNEL_TYPE.
-+ * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the
-+ * attributes determining channel width.
-+ *
-+ * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
-+ * its %NL80211_ATTR_WDEV identifier. It must have been created with
-+ * %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the
-+ * P2P Device can be used for P2P operations, e.g. remain-on-channel and
-+ * public action frame TX.
-+ * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by
-+ * its %NL80211_ATTR_WDEV identifier.
-+ *
-+ * @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to
-+ * notify userspace that AP has rejected the connection request from a
-+ * station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON
-+ * is used for this.
-+ *
-+ * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames
-+ * for IBSS or MESH vif.
++ * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS
++ * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS
+ *
-+ * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control.
-+ * This is to be used with the drivers advertising the support of MAC
-+ * address based access control. List of MAC addresses is passed in
-+ * %NL80211_ATTR_MAC_ADDRS and ACL policy is passed in
-+ * %NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it
-+ * is not already done. The new list will replace any existing list. Driver
-+ * will clear its ACL when the list of MAC addresses passed is empty. This
-+ * command is used in AP/P2P GO mode. Driver has to make sure to clear its
-+ * ACL list during %NL80211_CMD_STOP_AP.
-+ *
-+ * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once
-+ * a radar is detected or the channel availability scan (CAC) has finished
-+ * or was aborted, or a radar was detected, usermode will be notified with
-+ * this event. This command is also used to notify userspace about radars
-+ * while operating on this channel.
-+ * %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the
-+ * event.
- *
- * @NL80211_CMD_MAX: highest used command number
- * @__NL80211_CMD_AFTER_LAST: internal use
-@@ -708,6 +754,17 @@ enum nl80211_commands {
-
- NL80211_CMD_CH_SWITCH_NOTIFY,
-
-+ NL80211_CMD_START_P2P_DEVICE,
-+ NL80211_CMD_STOP_P2P_DEVICE,
-+
-+ NL80211_CMD_CONN_FAILED,
-+
-+ NL80211_CMD_SET_MCAST_RATE,
-+
-+ NL80211_CMD_SET_MAC_ACL,
-+
-+ NL80211_CMD_RADAR_DETECT,
-+
- /* add new commands above here */
-
- /* used to define NL80211_CMD_MAX below */
-@@ -744,14 +801,26 @@ enum nl80211_commands {
- * /sys/class/ieee80211/<phyname>/index
- * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
- * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
-- * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
-+ * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz,
-+ * defines the channel together with the (deprecated)
-+ * %NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes
-+ * %NL80211_ATTR_CHANNEL_WIDTH and if needed %NL80211_ATTR_CENTER_FREQ1
-+ * and %NL80211_ATTR_CENTER_FREQ2
-+ * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values
-+ * of &enum nl80211_chan_width, describing the channel width. See the
-+ * documentation of the enum for more information.
-+ * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the
-+ * channel, used for anything but 20 MHz bandwidth
-+ * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the
-+ * channel, used only for 80+80 MHz bandwidth
- * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
-- * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
-+ * if HT20 or HT40 are to be used (i.e., HT disabled if not included):
- * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
- * this attribute)
- * NL80211_CHAN_HT20 = HT20 only
- * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
- * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
-+ * This attribute is now deprecated.
- * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
- * less than or equal to the RTS threshold; allowed range: 1..255;
- * dot11ShortRetryLimit; u8
-@@ -918,7 +987,7 @@ enum nl80211_commands {
- * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
- * used for the association (&enum nl80211_mfp, represented as a u32);
- * this attribute can be used
-- * with %NL80211_CMD_ASSOCIATE request
-+ * with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests
- *
- * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
- * &struct nl80211_sta_flag_update.
-@@ -1251,6 +1320,54 @@ enum nl80211_commands {
- * was used to provide the hint. For the different types of
- * allowed user regulatory hints see nl80211_user_reg_hint_type.
- *
-+ * @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected
-+ * the connection request from a station. nl80211_connect_failed_reason
-+ * enum has different reasons of connection failure.
++ * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many
++ * associated stations are supported in AP mode (including P2P GO); u32.
++ * Since drivers may not have a fixed limit on the maximum number (e.g.,
++ * other concurrent operations may affect this), drivers are allowed to
++ * advertise values that cannot always be met. In such cases, an attempt
++ * to add a new station entry with @NL80211_CMD_NEW_STATION may fail.
+ *
-+ * @NL80211_ATTR_SAE_DATA: SAE elements in Authentication frames. This starts
-+ * with the Authentication transaction sequence number field.
++ * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which
++ * should be updated when the frame is transmitted.
++ * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum
++ * supported number of csa counters.
+ *
-+ * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from
-+ * association request when used with NL80211_CMD_NEW_STATION)
++ * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
++ * As specified in the &enum nl80211_tdls_peer_capability.
+ *
-+ * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32)
++ * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface
++ * creation then the new interface will be owned by the netlink socket
++ * that created it and will be destroyed when the socket is closed
+ *
-+ * @NL80211_ATTR_P2P_CTWINDOW: P2P GO Client Traffic Window (u8), used with
-+ * the START_AP and SET_BSS commands
-+ * @NL80211_ATTR_P2P_OPPPS: P2P GO opportunistic PS (u8), used with the
-+ * START_AP and SET_BSS commands. This can have the values 0 or 1;
-+ * if not given in START_AP 0 is assumed, if not given in SET_BSS
-+ * no change is made.
-+ *
-+ * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode
-+ * defined in &enum nl80211_mesh_power_mode.
-+ *
-+ * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy,
-+ * carried in a u32 attribute
-+ *
-+ * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for
-+ * MAC ACL.
-+ *
-+ * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum
-+ * number of MAC addresses that a device can support for MAC
-+ * ACL.
-+ *
-+ * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace,
-+ * contains a value of enum nl80211_radar_event (u32).
-+ *
-+ * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver
-+ * has and handles. The format is the same as the IE contents. See
-+ * 802.11-2012 8.4.2.29 for more information.
-+ * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver
-+ * has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields.
-+ *
-+ * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to
-+ * the driver, e.g., to enable TDLS power save (PU-APSD).
-+ *
-+ * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are
-+ * advertised to the driver, e.g., to enable TDLS off channel operations
-+ * and PU-APSD.
++ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
++ * transmit power to stay within regulatory limits. u32, dBi.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
-@@ -1506,6 +1623,39 @@ enum nl80211_attrs {
+@@ -1883,6 +1922,20 @@ enum nl80211_attrs {
- NL80211_ATTR_USER_REG_HINT_TYPE,
+ NL80211_ATTR_QOS_MAP,
-+ NL80211_ATTR_CONN_FAILED_REASON,
-+
-+ NL80211_ATTR_SAE_DATA,
-+
-+ NL80211_ATTR_VHT_CAPABILITY,
-+
-+ NL80211_ATTR_SCAN_FLAGS,
-+
-+ NL80211_ATTR_CHANNEL_WIDTH,
-+ NL80211_ATTR_CENTER_FREQ1,
-+ NL80211_ATTR_CENTER_FREQ2,
-+
-+ NL80211_ATTR_P2P_CTWINDOW,
-+ NL80211_ATTR_P2P_OPPPS,
-+
-+ NL80211_ATTR_LOCAL_MESH_POWER_MODE,
-+
-+ NL80211_ATTR_ACL_POLICY,
-+
-+ NL80211_ATTR_MAC_ADDRS,
++ NL80211_ATTR_MAC_HINT,
++ NL80211_ATTR_WIPHY_FREQ_HINT,
+
-+ NL80211_ATTR_MAC_ACL_MAX,
++ NL80211_ATTR_MAX_AP_ASSOC_STA,
+
-+ NL80211_ATTR_RADAR_EVENT,
++ NL80211_ATTR_TDLS_PEER_CAPABILITY,
+
-+ NL80211_ATTR_EXT_CAPA,
-+ NL80211_ATTR_EXT_CAPA_MASK,
++ NL80211_ATTR_IFACE_SOCKET_OWNER,
+
-+ NL80211_ATTR_STA_CAPABILITY,
-+ NL80211_ATTR_STA_EXT_CAPABILITY,
++ NL80211_ATTR_CSA_C_OFFSETS_TX,
++ NL80211_ATTR_MAX_CSA_COUNTERS,
+
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
-@@ -1549,6 +1699,7 @@ enum nl80211_attrs {
- #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
- #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
- #define NL80211_HT_CAPABILITY_LEN 26
-+#define NL80211_VHT_CAPABILITY_LEN 12
-
- #define NL80211_MAX_NR_CIPHER_SUITES 5
- #define NL80211_MAX_NR_AKM_SUITES 2
-@@ -1575,6 +1726,10 @@ enum nl80211_attrs {
- * @NL80211_IFTYPE_MESH_POINT: mesh point
- * @NL80211_IFTYPE_P2P_CLIENT: P2P client
- * @NL80211_IFTYPE_P2P_GO: P2P group owner
-+ * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev
-+ * and therefore can't be created in the normal ways, use the
-+ * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
-+ * commands to create and destroy one
- * @NL80211_IFTYPE_MAX: highest interface type number currently defined
- * @NUM_NL80211_IFTYPES: number of defined interface types
- *
-@@ -1593,6 +1748,7 @@ enum nl80211_iftype {
- NL80211_IFTYPE_MESH_POINT,
- NL80211_IFTYPE_P2P_CLIENT,
- NL80211_IFTYPE_P2P_GO,
-+ NL80211_IFTYPE_P2P_DEVICE,
-
- /* keep last */
- NUM_NL80211_IFTYPES,
-@@ -1617,6 +1773,9 @@ enum nl80211_iftype {
- * flag can't be changed, it is only valid while adding a station, and
- * attempts to change it will silently be ignored (rather than rejected
- * as errors.)
-+ * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers
-+ * that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a
-+ * previously added station into associated state
- * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
- * @__NL80211_STA_FLAG_AFTER_LAST: internal use
- */
-@@ -1628,6 +1787,7 @@ enum nl80211_sta_flags {
- NL80211_STA_FLAG_MFP,
- NL80211_STA_FLAG_AUTHENTICATED,
- NL80211_STA_FLAG_TDLS_PEER,
-+ NL80211_STA_FLAG_ASSOCIATED,
-
- /* keep last */
- __NL80211_STA_FLAG_AFTER_LAST,
-@@ -1664,10 +1824,15 @@ struct nl80211_sta_flag_update {
- * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
- * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
-- * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
-+ * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 MHz dualchannel bitrate
- * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
- * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s)
- * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
-+ * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8)
-+ * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8)
-+ * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate
-+ * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: 80+80 MHz VHT rate
-+ * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate
- * @__NL80211_RATE_INFO_AFTER_LAST: internal use
- */
- enum nl80211_rate_info {
-@@ -1677,6 +1842,11 @@ enum nl80211_rate_info {
- NL80211_RATE_INFO_40_MHZ_WIDTH,
- NL80211_RATE_INFO_SHORT_GI,
- NL80211_RATE_INFO_BITRATE32,
-+ NL80211_RATE_INFO_VHT_MCS,
-+ NL80211_RATE_INFO_VHT_NSS,
-+ NL80211_RATE_INFO_80_MHZ_WIDTH,
-+ NL80211_RATE_INFO_80P80_MHZ_WIDTH,
-+ NL80211_RATE_INFO_160_MHZ_WIDTH,
-
- /* keep last */
- __NL80211_RATE_INFO_AFTER_LAST,
-@@ -1723,6 +1893,8 @@ enum nl80211_sta_bss_param {
- * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
- * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
- * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
-+ * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station)
-+ * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station)
- * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
- * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
- * containing info as possible, see &enum nl80211_rate_info
-@@ -1744,6 +1916,12 @@ enum nl80211_sta_bss_param {
- * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
- * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
- * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
-+ * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode
-+ * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode
-+ * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards
-+ * non-peer STA
-+ * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU
-+ * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
- * @__NL80211_STA_INFO_AFTER_LAST: internal
- * @NL80211_STA_INFO_MAX: highest possible station info attribute
- */
-@@ -1768,6 +1946,13 @@ enum nl80211_sta_info {
- NL80211_STA_INFO_STA_FLAGS,
- NL80211_STA_INFO_BEACON_LOSS,
- NL80211_STA_INFO_T_OFFSET,
-+ NL80211_STA_INFO_LOCAL_PM,
-+ NL80211_STA_INFO_PEER_PM,
-+ NL80211_STA_INFO_NONPEER_PM,
-+ NL80211_STA_INFO_RX_BYTES64,
-+ NL80211_STA_INFO_TX_BYTES64,
-+ NL80211_STA_INFO_CHAIN_SIGNAL,
-+ NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
-
- /* keep last */
- __NL80211_STA_INFO_AFTER_LAST,
-@@ -1877,6 +2062,20 @@ enum nl80211_band_attr {
- * on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
- * (100 * dBm).
-+ * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS
-+ * (enum nl80211_dfs_state)
-+ * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long
-+ * this channel is in this DFS state.
-+ * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this
-+ * channel as the control channel
-+ * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this
-+ * channel as the control channel
-+ * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel
-+ * as the primary or any of the secondary channels isn't possible,
-+ * this includes 80+80 channels
-+ * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel
-+ * using this channel as the primary or any of the secondary channels
-+ * isn't possible
+@@ -2304,9 +2357,35 @@ enum nl80211_band_attr {
+ * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel
+ * using this channel as the primary or any of the secondary channels
+ * isn't possible
++ * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
++ * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this
++ * channel. A channel that has the INDOOR_ONLY attribute can only be
++ * used when there is a clear assessment that the device is operating in
++ * an indoor surroundings, i.e., it is connected to AC power (and not
++ * through portable DC inverters) or is under the control of a master
++ * that is acting as an AP and is connected to AC power.
++ * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this
++ * channel if it's connected concurrently to a BSS on the same channel on
++ * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz
++ * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a
++ * channel that has the GO_CONCURRENT attribute set can be done when there
++ * is a clear assessment that the device is operating under the guidance of
++ * an authorized master, i.e., setting up a GO while the device is also
++ * connected to an AP with DFS and radar detection on the UNII band (it is
++ * up to user-space, i.e., wpa_supplicant to perform the required
++ * verifications)
++ * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed
++ * on this channel in current regulatory domain.
++ * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
++ * on this channel in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
* currently defined
* @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
-@@ -1889,6 +2088,12 @@ enum nl80211_frequency_attr {
- NL80211_FREQUENCY_ATTR_NO_IBSS,
- NL80211_FREQUENCY_ATTR_RADAR,
- NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
-+ NL80211_FREQUENCY_ATTR_DFS_STATE,
-+ NL80211_FREQUENCY_ATTR_DFS_TIME,
-+ NL80211_FREQUENCY_ATTR_NO_HT40_MINUS,
-+ NL80211_FREQUENCY_ATTR_NO_HT40_PLUS,
-+ NL80211_FREQUENCY_ATTR_NO_80MHZ,
-+ NL80211_FREQUENCY_ATTR_NO_160MHZ,
-
- /* keep last */
- __NL80211_FREQUENCY_ATTR_AFTER_LAST,
-@@ -2159,6 +2364,34 @@ enum nl80211_mntr_flags {
- };
-
- /**
-+ * enum nl80211_mesh_power_mode - mesh power save modes
-+ *
-+ * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is
-+ * not known or has not been set yet.
-+ * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is
-+ * in Awake state all the time.
-+ * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will
-+ * alternate between Active and Doze states, but will wake up for
-+ * neighbor's beacons.
-+ * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will
-+ * alternate between Active and Doze states, but may not wake up
-+ * for neighbor's beacons.
-+ *
-+ * @__NL80211_MESH_POWER_AFTER_LAST - internal use
-+ * @NL80211_MESH_POWER_MAX - highest possible power save level
-+ */
-+
-+enum nl80211_mesh_power_mode {
-+ NL80211_MESH_POWER_UNKNOWN,
-+ NL80211_MESH_POWER_ACTIVE,
-+ NL80211_MESH_POWER_LIGHT_SLEEP,
-+ NL80211_MESH_POWER_DEEP_SLEEP,
-+
-+ __NL80211_MESH_POWER_AFTER_LAST,
-+ NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1
-+};
-+
-+/**
- * enum nl80211_meshconf_params - mesh configuration parameters
- *
- * Mesh configuration parameters. These can be changed while the mesh is
-@@ -2252,6 +2485,11 @@ enum nl80211_mntr_flags {
- * (in TUs) during which a mesh STA can send only one Action frame
- * containing a PREQ element for root path confirmation.
- *
-+ * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links.
-+ * type &enum nl80211_mesh_power_mode (u32)
+ *
-+ * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs)
-+ *
- * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
++ * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122
++ * for more information on the FCC description of the relaxations allowed
++ * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and
++ * NL80211_FREQUENCY_ATTR_GO_CONCURRENT.
*/
- enum nl80211_meshconf_params {
-@@ -2281,6 +2519,8 @@ enum nl80211_meshconf_params {
- NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
- NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
- NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
-+ NL80211_MESHCONF_POWER_MODE,
-+ NL80211_MESHCONF_AWAKE_WINDOW,
+ enum nl80211_frequency_attr {
+ __NL80211_FREQUENCY_ATTR_INVALID,
+@@ -2322,6 +2401,11 @@ enum nl80211_frequency_attr {
+ NL80211_FREQUENCY_ATTR_NO_HT40_PLUS,
+ NL80211_FREQUENCY_ATTR_NO_80MHZ,
+ NL80211_FREQUENCY_ATTR_NO_160MHZ,
++ NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
++ NL80211_FREQUENCY_ATTR_INDOOR_ONLY,
++ NL80211_FREQUENCY_ATTR_GO_CONCURRENT,
++ NL80211_FREQUENCY_ATTR_NO_20MHZ,
++ NL80211_FREQUENCY_ATTR_NO_10MHZ,
/* keep last */
- __NL80211_MESHCONF_ATTR_AFTER_LAST,
-@@ -2385,6 +2625,15 @@ enum nl80211_ac {
- #define NL80211_TXQ_Q_BE NL80211_AC_BE
- #define NL80211_TXQ_Q_BK NL80211_AC_BK
-
-+/**
-+ * enum nl80211_channel_type - channel type
-+ * @NL80211_CHAN_NO_HT: 20 MHz, non-HT channel
-+ * @NL80211_CHAN_HT20: 20 MHz HT channel
-+ * @NL80211_CHAN_HT40MINUS: HT40 channel, secondary channel
-+ * below the control channel
-+ * @NL80211_CHAN_HT40PLUS: HT40 channel, secondary channel
-+ * above the control channel
-+ */
- enum nl80211_channel_type {
- NL80211_CHAN_NO_HT,
- NL80211_CHAN_HT20,
-@@ -2393,6 +2642,32 @@ enum nl80211_channel_type {
- };
+ __NL80211_FREQUENCY_ATTR_AFTER_LAST,
+@@ -2412,12 +2496,14 @@ enum nl80211_reg_type {
+ * in KHz. This is not a center a frequency but an actual regulatory
+ * band edge.
+ * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
+- * frequency range, in KHz.
++ * frequency range, in KHz.
+ * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
+ * for a given frequency range. The value is in mBi (100 * dBi).
+ * If you don't have one then don't send this.
+ * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
+ * a given frequency range. The value is in mBm (100 * dBm).
++ * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
++ * If not present or 0 default CAC time will be used.
+ * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
+ * currently defined
+ * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
+@@ -2433,6 +2519,8 @@ enum nl80211_reg_rule_attr {
+ NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
+ NL80211_ATTR_POWER_RULE_MAX_EIRP,
- /**
-+ * enum nl80211_chan_width - channel width definitions
-+ *
-+ * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH
-+ * attribute.
-+ *
-+ * @NL80211_CHAN_WIDTH_20_NOHT: 20 MHz, non-HT channel
-+ * @NL80211_CHAN_WIDTH_20: 20 MHz HT channel
-+ * @NL80211_CHAN_WIDTH_40: 40 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
-+ * attribute must be provided as well
-+ * @NL80211_CHAN_WIDTH_80: 80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
-+ * attribute must be provided as well
-+ * @NL80211_CHAN_WIDTH_80P80: 80+80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
-+ * and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well
-+ * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
-+ * attribute must be provided as well
-+ */
-+enum nl80211_chan_width {
-+ NL80211_CHAN_WIDTH_20_NOHT,
-+ NL80211_CHAN_WIDTH_20,
-+ NL80211_CHAN_WIDTH_40,
-+ NL80211_CHAN_WIDTH_80,
-+ NL80211_CHAN_WIDTH_80P80,
-+ NL80211_CHAN_WIDTH_160,
-+};
++ NL80211_ATTR_DFS_CAC_TIME,
+
-+/**
- * enum nl80211_bss - netlink attributes for a BSS
- *
- * @__NL80211_BSS_INVALID: invalid
-@@ -2460,6 +2735,7 @@ enum nl80211_bss_status {
- * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
- * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
- * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
-+ * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals
- * @__NL80211_AUTHTYPE_NUM: internal
- * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
- * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
-@@ -2471,6 +2747,7 @@ enum nl80211_auth_type {
- NL80211_AUTHTYPE_SHARED_KEY,
- NL80211_AUTHTYPE_FT,
- NL80211_AUTHTYPE_NETWORK_EAP,
-+ NL80211_AUTHTYPE_SAE,
-
/* keep last */
- __NL80211_AUTHTYPE_NUM,
-@@ -2689,10 +2966,12 @@ enum nl80211_tx_power_setting {
- * corresponds to the lowest-order bit in the second byte of the mask.
- * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
- * xx indicates "don't care") would be represented by a pattern of
-- * twelve zero bytes, and a mask of "0xed,0x07".
-+ * twelve zero bytes, and a mask of "0xed,0x01".
- * Note that the pattern matching is done as though frames were not
- * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
- * first (including SNAP header unpacking) and then matched.
-+ * @NL80211_WOWLAN_PKTPAT_OFFSET: packet offset, pattern is matched after
-+ * these fixed number of bytes of received packet
- * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
- * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
+ __NL80211_REG_RULE_ATTR_AFTER_LAST,
+ NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
+@@ -2442,9 +2530,15 @@ enum nl80211_reg_rule_attr {
+ * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
+- * only report BSS with matching SSID.
++ * only report BSS with matching SSID.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
+- * BSS in scan results. Filtering is turned off if not specified.
++ * BSS in scan results. Filtering is turned off if not specified. Note that
++ * if this attribute is in a match set of its own, then it is treated as
++ * the default value for all matchsets with an SSID, rather than being a
++ * matchset of its own without an RSSI filter. This is due to problems with
++ * how this API was implemented in the past. Also, due to the same problem,
++ * the only way to create a matchset with only an RSSI filter (with this
++ * attribute) is if there's only a single matchset with the RSSI attribute.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
+ * attribute number currently defined
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
+@@ -2477,6 +2571,9 @@ enum nl80211_sched_scan_match_attr {
+ * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
+ * this includes probe requests or modes of operation that require
+ * beaconing.
++ * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
++ * base on contiguous rules and wider channels will be allowed to cross
++ * multiple contiguous/overlapping frequency ranges.
*/
-@@ -2700,6 +2979,7 @@ enum nl80211_wowlan_packet_pattern_attr
- __NL80211_WOWLAN_PKTPAT_INVALID,
- NL80211_WOWLAN_PKTPAT_MASK,
- NL80211_WOWLAN_PKTPAT_PATTERN,
-+ NL80211_WOWLAN_PKTPAT_OFFSET,
+ enum nl80211_reg_rule_flags {
+ NL80211_RRF_NO_OFDM = 1<<0,
+@@ -2488,6 +2585,7 @@ enum nl80211_reg_rule_flags {
+ NL80211_RRF_PTMP_ONLY = 1<<6,
+ NL80211_RRF_NO_IR = 1<<7,
+ __NL80211_RRF_NO_IBSS = 1<<8,
++ NL80211_RRF_AUTO_BW = 1<<11,
+ };
- NUM_NL80211_WOWLAN_PKTPAT,
- MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
-@@ -2710,6 +2990,7 @@ enum nl80211_wowlan_packet_pattern_attr
- * @max_patterns: maximum number of patterns supported
- * @min_pattern_len: minimum length of each pattern
- * @max_pattern_len: maximum length of each pattern
-+ * @max_pkt_offset: maximum Rx packet offset
- *
- * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
- * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
-@@ -2719,6 +3000,7 @@ struct nl80211_wowlan_pattern_support {
- __u32 max_patterns;
- __u32 min_pattern_len;
- __u32 max_pattern_len;
-+ __u32 max_pkt_offset;
- } __attribute__((packed));
+ #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
+@@ -2526,10 +2624,13 @@ enum nl80211_dfs_regions {
+ * present has been registered with the wireless core that
+ * has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a
+ * supported feature.
++ * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the
++ * platform is operating in an indoor environment.
+ */
+ enum nl80211_user_reg_hint_type {
+ NL80211_USER_REG_HINT_USER = 0,
+ NL80211_USER_REG_HINT_CELL_BASE = 1,
++ NL80211_USER_REG_HINT_INDOOR = 2,
+ };
/**
-@@ -2734,12 +3016,17 @@ struct nl80211_wowlan_pattern_support {
- * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
- * which are passed in an array of nested attributes, each nested attribute
- * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
-- * Each pattern defines a wakeup packet. The matching is done on the MSDU,
-- * i.e. as though the packet was an 802.3 packet, so the pattern matching
-- * is done after the packet is converted to the MSDU.
-+ * Each pattern defines a wakeup packet. Packet offset is associated with
-+ * each pattern which is used while matching the pattern. The matching is
-+ * done on the MSDU, i.e. as though the packet was an 802.3 packet, so the
-+ * pattern matching is done after the packet is converted to the MSDU.
- *
- * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
- * carrying a &struct nl80211_wowlan_pattern_support.
-+ *
-+ * When reporting wakeup. it is a u32 attribute containing the 0-based
-+ * index of the pattern that caused the wakeup, in the patterns passed
-+ * to the kernel when configuring.
- * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be
- * used when setting, used only to indicate that GTK rekeying is supported
- * by the device (flag)
-@@ -2750,8 +3037,36 @@ struct nl80211_wowlan_pattern_support {
- * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)
- * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released
- * (on devices that have rfkill in the device) (flag)
-+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains
-+ * the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame
-+ * may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN
-+ * attribute contains the original length.
-+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11
-+ * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211
-+ * attribute if the packet was truncated somewhere.
-+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the
-+ * 802.11 packet that caused the wakeup, e.g. a magic packet. The frame may
-+ * be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute
-+ * contains the original length.
-+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3
-+ * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023
-+ * attribute if the packet was truncated somewhere.
-+ * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section
-+ * "TCP connection wakeup" for more details. This is a nested attribute
-+ * containing the exact information for establishing and keeping alive
-+ * the TCP connection.
-+ * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the
-+ * wakeup packet was received on the TCP connection
-+ * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the
-+ * TCP connection was lost or failed to be established
-+ * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only,
-+ * the TCP connection ran out of tokens to use for data to send to the
-+ * service
- * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
- * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
-+ *
-+ * These nested attributes are used to configure the wakeup triggers and
-+ * to report the wakeup reason(s).
+@@ -3131,6 +3232,7 @@ enum nl80211_key_attributes {
+ * in an array of MCS numbers.
+ * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection,
+ * see &struct nl80211_txrate_vht
++ * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi
+ * @__NL80211_TXRATE_AFTER_LAST: internal
+ * @NL80211_TXRATE_MAX: highest TX rate attribute
*/
- enum nl80211_wowlan_triggers {
- __NL80211_WOWLAN_TRIG_INVALID,
-@@ -2764,6 +3079,14 @@ enum nl80211_wowlan_triggers {
- NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST,
- NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE,
- NL80211_WOWLAN_TRIG_RFKILL_RELEASE,
-+ NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211,
-+ NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN,
-+ NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023,
-+ NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN,
-+ NL80211_WOWLAN_TRIG_TCP_CONNECTION,
-+ NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH,
-+ NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST,
-+ NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,
+@@ -3139,6 +3241,7 @@ enum nl80211_tx_rate_attributes {
+ NL80211_TXRATE_LEGACY,
+ NL80211_TXRATE_HT,
+ NL80211_TXRATE_VHT,
++ NL80211_TXRATE_GI,
/* keep last */
- NUM_NL80211_WOWLAN_TRIG,
-@@ -2771,6 +3094,116 @@ enum nl80211_wowlan_triggers {
+ __NL80211_TXRATE_AFTER_LAST,
+@@ -3156,6 +3259,12 @@ struct nl80211_txrate_vht {
+ __u16 mcs[NL80211_VHT_NSS_MAX];
};
- /**
-+ * DOC: TCP connection wakeup
-+ *
-+ * Some devices can establish a TCP connection in order to be woken up by a
-+ * packet coming in from outside their network segment, or behind NAT. If
-+ * configured, the device will establish a TCP connection to the given
-+ * service, and periodically send data to that service. The first data
-+ * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK.
-+ * The data packets can optionally include a (little endian) sequence
-+ * number (in the TCP payload!) that is generated by the device, and, also
-+ * optionally, a token from a list of tokens. This serves as a keep-alive
-+ * with the service, and for NATed connections, etc.
-+ *
-+ * During this keep-alive period, the server doesn't send any data to the
-+ * client. When receiving data, it is compared against the wakeup pattern
-+ * (and mask) and if it matches, the host is woken up. Similarly, if the
-+ * connection breaks or cannot be established to start with, the host is
-+ * also woken up.
-+ *
-+ * Developer's note: ARP offload is required for this, otherwise TCP
-+ * response packets might not go through correctly.
-+ */
-+
-+/**
-+ * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence
-+ * @start: starting value
-+ * @offset: offset of sequence number in packet
-+ * @len: length of the sequence value to write, 1 through 4
-+ *
-+ * Note: don't confuse with the TCP sequence number(s), this is for the
-+ * keepalive packet payload. The actual value is written into the packet
-+ * in little endian.
-+ */
-+struct nl80211_wowlan_tcp_data_seq {
-+ __u32 start, offset, len;
-+};
-+
-+/**
-+ * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config
-+ * @offset: offset of token in packet
-+ * @len: length of each token
-+ * @token_stream: stream of data to be used for the tokens, the length must
-+ * be a multiple of @len for this to make sense
-+ */
-+struct nl80211_wowlan_tcp_data_token {
-+ __u32 offset, len;
-+ __u8 token_stream[];
++enum nl80211_txrate_gi {
++ NL80211_TXRATE_DEFAULT_GI,
++ NL80211_TXRATE_FORCE_SGI,
++ NL80211_TXRATE_FORCE_LGI,
+};
+
-+/**
-+ * struct nl80211_wowlan_tcp_data_token_feature - data token features
-+ * @min_len: minimum token length
-+ * @max_len: maximum token length
-+ * @bufsize: total available token buffer size (max size of @token_stream)
-+ */
-+struct nl80211_wowlan_tcp_data_token_feature {
-+ __u32 min_len, max_len, bufsize;
-+};
-+
-+/**
-+ * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters
-+ * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes
-+ * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order)
-+ * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address
-+ * (in network byte order)
-+ * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because
-+ * route lookup when configured might be invalid by the time we suspend,
-+ * and doing a route lookup when suspending is no longer possible as it
-+ * might require ARP querying.
-+ * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a
-+ * socket and port will be allocated
-+ * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16)
-+ * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte.
-+ * For feature advertising, a u32 attribute holding the maximum length
-+ * of the data payload.
-+ * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration
-+ * (if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature
-+ * advertising it is just a flag
-+ * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration,
-+ * see &struct nl80211_wowlan_tcp_data_token and for advertising see
-+ * &struct nl80211_wowlan_tcp_data_token_feature.
-+ * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum
-+ * interval in feature advertising (u32)
-+ * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a
-+ * u32 attribute holding the maximum length
-+ * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for
-+ * feature advertising. The mask works like @NL80211_WOWLAN_PKTPAT_MASK
-+ * but on the TCP payload only.
-+ * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes
-+ * @MAX_NL80211_WOWLAN_TCP: highest attribute number
-+ */
-+enum nl80211_wowlan_tcp_attrs {
-+ __NL80211_WOWLAN_TCP_INVALID,
-+ NL80211_WOWLAN_TCP_SRC_IPV4,
-+ NL80211_WOWLAN_TCP_DST_IPV4,
-+ NL80211_WOWLAN_TCP_DST_MAC,
-+ NL80211_WOWLAN_TCP_SRC_PORT,
-+ NL80211_WOWLAN_TCP_DST_PORT,
-+ NL80211_WOWLAN_TCP_DATA_PAYLOAD,
-+ NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ,
-+ NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN,
-+ NL80211_WOWLAN_TCP_DATA_INTERVAL,
-+ NL80211_WOWLAN_TCP_WAKE_PAYLOAD,
-+ NL80211_WOWLAN_TCP_WAKE_MASK,
-+
-+ /* keep last */
-+ NUM_NL80211_WOWLAN_TCP,
-+ MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1
-+};
-+
-+/**
- * enum nl80211_iface_limit_attrs - limit attributes
- * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
- * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
-@@ -2806,6 +3239,8 @@ enum nl80211_iface_limit_attrs {
- * the infrastructure network's beacon interval.
- * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
+ /**
+ * enum nl80211_band - Frequency band
+ * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
+@@ -3595,6 +3704,8 @@ enum nl80211_iface_limit_attrs {
* different channels may be used within this group.
-+ * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap
-+ * of supported channel widths for radar detection.
+ * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap
+ * of supported channel widths for radar detection.
++ * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap
++ * of supported regulatory regions for radar detection.
* @NUM_NL80211_IFACE_COMB: number of attributes
* @MAX_NL80211_IFACE_COMB: highest attribute number
*
-@@ -2838,6 +3273,7 @@ enum nl80211_if_combination_attrs {
- NL80211_IFACE_COMB_MAXNUM,
+@@ -3628,6 +3739,7 @@ enum nl80211_if_combination_attrs {
NL80211_IFACE_COMB_STA_AP_BI_MATCH,
NL80211_IFACE_COMB_NUM_CHANNELS,
-+ NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
+ NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
++ NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
/* keep last */
NUM_NL80211_IFACE_COMB,
-@@ -2994,12 +3430,56 @@ enum nl80211_ap_sme_features {
+@@ -3801,11 +3913,8 @@ enum nl80211_ap_sme_features {
* @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
* to work properly to suppport receiving regulatory hints from
* cellular base stations.
-+ * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
-+ * P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
-+ * in the interface combinations, even when it's only used for scan
-+ * and remain-on-channel. This could be due to, for example, the
-+ * remain-on-channel implementation requiring a channel context.
-+ * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of
-+ * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station
-+ * mode
-+ * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan
-+ * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported
-+ * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif
-+ * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting
-+ * @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform
-+ * OBSS scans and generate 20/40 BSS coex reports. This flag is used only
-+ * for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied.
-+ * @NL80211_FEATURE_P2P_GO_CTWIN: P2P GO implementation supports CT Window
-+ * setting
-+ * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic
-+ * powersave
-+ * @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state
-+ * transitions for AP clients. Without this flag (and if the driver
-+ * doesn't have the AP SME in the device) the driver supports adding
-+ * stations only when they're associated and adds them in associated
-+ * state (to later be transitioned into authorized), with this flag
-+ * they should be added before even sending the authentication reply
-+ * and then transitioned into authenticated, associated and authorized
-+ * states using station flags.
-+ * Note that even for drivers that support this, the default is to add
-+ * stations in authenticated/associated state, so to add unauthenticated
-+ * stations the authenticated/associated bits have to be set in the mask.
-+ * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits
-+ * (HT40, VHT 80/160 MHz) if this flag is set
+- * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
+- * P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
+- * in the interface combinations, even when it's only used for scan
+- * and remain-on-channel. This could be due to, for example, the
+- * remain-on-channel implementation requiring a channel context.
++ * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only
++ * here to reserve the value for API/ABI compatibility)
+ * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of
+ * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station
+ * mode
+@@ -3841,6 +3950,9 @@ enum nl80211_ap_sme_features {
+ * interface. An active monitor interface behaves like a normal monitor
+ * interface, but gets added to the driver. It ensures that incoming
+ * unicast packets directed at the configured interface address get ACKed.
++ * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic
++ * channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the
++ * lifetime of a BSS.
*/
enum nl80211_feature_flags {
-- NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
-- NL80211_FEATURE_HT_IBSS = 1 << 1,
-- NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
-- NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,
-+ NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
-+ NL80211_FEATURE_HT_IBSS = 1 << 1,
-+ NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
-+ NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,
-+ NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4,
-+ NL80211_FEATURE_SAE = 1 << 5,
-+ NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6,
-+ NL80211_FEATURE_SCAN_FLUSH = 1 << 7,
-+ NL80211_FEATURE_AP_SCAN = 1 << 8,
-+ NL80211_FEATURE_VIF_TXPOWER = 1 << 9,
-+ NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10,
-+ NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11,
-+ NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12,
-+ /* bit 13 is reserved */
-+ NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14,
-+ NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15,
+ NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
+@@ -3861,6 +3973,7 @@ enum nl80211_feature_flags {
+ NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15,
+ NL80211_FEATURE_USERSPACE_MPM = 1 << 16,
+ NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17,
++ NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18,
};
/**
-@@ -3023,4 +3503,94 @@ enum nl80211_probe_resp_offload_support_
- NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3,
+@@ -4037,4 +4150,20 @@ struct nl80211_vendor_cmd_info {
+ __u32 subcmd;
};
+/**
-+ * enum nl80211_connect_failed_reason - connection request failed reasons
-+ * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be
-+ * handled by the AP is reached.
-+ * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL.
-+ */
-+enum nl80211_connect_failed_reason {
-+ NL80211_CONN_FAIL_MAX_CLIENTS,
-+ NL80211_CONN_FAIL_BLOCKED_CLIENT,
-+};
-+
-+/**
-+ * enum nl80211_scan_flags - scan request control flags
-+ *
-+ * Scan request control flags are used to control the handling
-+ * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN
-+ * requests.
-+ *
-+ * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority
-+ * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning
-+ * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured
-+ * as AP and the beaconing has already been configured. This attribute is
-+ * dangerous because will destroy stations performance as a lot of frames
-+ * will be lost while scanning off-channel, therefore it must be used only
-+ * when really needed
-+ */
-+enum nl80211_scan_flags {
-+ NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0,
-+ NL80211_SCAN_FLAG_FLUSH = 1<<1,
-+ NL80211_SCAN_FLAG_AP = 1<<2,
-+};
-+
-+/**
-+ * enum nl80211_acl_policy - access control policy
-+ *
-+ * Access control policy is applied on a MAC list set by
-+ * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to
-+ * be used with %NL80211_ATTR_ACL_POLICY.
-+ *
-+ * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are
-+ * listed in ACL, i.e. allow all the stations which are not listed
-+ * in ACL to authenticate.
-+ * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed
-+ * in ACL, i.e. deny all the stations which are not listed in ACL.
-+ */
-+enum nl80211_acl_policy {
-+ NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED,
-+ NL80211_ACL_POLICY_DENY_UNLESS_LISTED,
-+};
-+
-+/**
-+ * enum nl80211_radar_event - type of radar event for DFS operation
-+ *
-+ * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace
-+ * about detected radars or success of the channel available check (CAC)
-+ *
-+ * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is
-+ * now unusable.
-+ * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished,
-+ * the channel is now available.
-+ * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no
-+ * change to the channel status.
-+ * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is
-+ * over, channel becomes usable.
-+ */
-+enum nl80211_radar_event {
-+ NL80211_RADAR_DETECTED,
-+ NL80211_RADAR_CAC_FINISHED,
-+ NL80211_RADAR_CAC_ABORTED,
-+ NL80211_RADAR_NOP_FINISHED,
-+};
-+
-+/**
-+ * enum nl80211_dfs_state - DFS states for channels
++ * enum nl80211_tdls_peer_capability - TDLS peer flags.
+ *
-+ * Channel states used by the DFS code.
++ * Used by tdls_mgmt() to determine which conditional elements need
++ * to be added to TDLS Setup frames.
+ *
-+ * @IEEE80211_DFS_USABLE: The channel can be used, but channel availability
-+ * check (CAC) must be performed before using it for AP or IBSS.
-+ * @IEEE80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it
-+ * is therefore marked as not available.
-+ * @IEEE80211_DFS_AVAILABLE: The channel has been CAC checked and is available.
++ * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
++ * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
++ * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
+ */
-+
-+enum nl80211_dfs_state {
-+ NL80211_DFS_USABLE,
-+ NL80211_DFS_UNAVAILABLE,
-+ NL80211_DFS_AVAILABLE,
++enum nl80211_tdls_peer_capability {
++ NL80211_TDLS_PEER_HT = 1<<0,
++ NL80211_TDLS_PEER_VHT = 1<<1,
++ NL80211_TDLS_PEER_WMM = 1<<2,
+};
+
#endif /* __LINUX_NL80211_H */
projects / openwrt / svn-archive / archive.git / commitdiff