--- /dev/null
+From 076dcedc6628c6bf92bd17bfcf8fb7b1af62bfb6 Mon Sep 17 00:00:00 2001
+From: William Zhang <william.zhang@broadcom.com>
+Date: Wed, 1 Jun 2022 15:56:51 -0700
+Subject: [PATCH] arm64: dts: Add DTS files for bcmbca SoC BCM63158
+
+Add DTS for ARMv8 based broadband SoC BCM63158. bcm63158.dtsi is the
+SoC description DTS header and bcm963158.dts is a simple DTS file for
+Broadcom BCM963158 Reference board that only enable the UART port.
+
+Signed-off-by: William Zhang <william.zhang@broadcom.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm64/boot/dts/broadcom/Makefile | 1 +
+ arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 2 +
+ .../boot/dts/broadcom/bcmbca/bcm63158.dtsi | 128 ++++++++++++++++++
+ .../boot/dts/broadcom/bcmbca/bcm963158.dts | 30 ++++
+ 4 files changed, 161 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/Makefile
+ create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
+ create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
+
+--- a/arch/arm64/boot/dts/broadcom/Makefile
++++ b/arch/arm64/boot/dts/broadcom/Makefile
+@@ -5,5 +5,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rp
+ bcm2837-rpi-cm3-io3.dtb
+
+ subdir-y += bcm4908
++subdir-y += bcmbca
+ subdir-y += northstar2
+ subdir-y += stingray
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
+@@ -0,0 +1,2 @@
++# SPDX-License-Identifier: GPL-2.0
++dtb-$(CONFIG_ARCH_BCMBCA) += bcm963158.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
+@@ -0,0 +1,128 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright 2022 Broadcom Ltd.
++ */
++
++#include <dt-bindings/interrupt-controller/irq.h>
++#include <dt-bindings/interrupt-controller/arm-gic.h>
++
++/ {
++ compatible = "brcm,bcm63158", "brcm,bcmbca";
++ #address-cells = <2>;
++ #size-cells = <2>;
++
++ interrupt-parent = <&gic>;
++
++ cpus {
++ #address-cells = <2>;
++ #size-cells = <0>;
++
++ B53_0: cpu@0 {
++ compatible = "brcm,brahma-b53";
++ device_type = "cpu";
++ reg = <0x0 0x0>;
++ next-level-cache = <&L2_0>;
++ enable-method = "psci";
++ };
++
++ B53_1: cpu@1 {
++ compatible = "brcm,brahma-b53";
++ device_type = "cpu";
++ reg = <0x0 0x1>;
++ next-level-cache = <&L2_0>;
++ enable-method = "psci";
++ };
++
++ B53_2: cpu@2 {
++ compatible = "brcm,brahma-b53";
++ device_type = "cpu";
++ reg = <0x0 0x2>;
++ next-level-cache = <&L2_0>;
++ enable-method = "psci";
++ };
++
++ B53_3: cpu@3 {
++ compatible = "brcm,brahma-b53";
++ device_type = "cpu";
++ reg = <0x0 0x3>;
++ next-level-cache = <&L2_0>;
++ enable-method = "psci";
++ };
++
++ L2_0: l2-cache0 {
++ compatible = "cache";
++ };
++ };
++
++ timer {
++ compatible = "arm,armv8-timer";
++ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
++ };
++
++ pmu: pmu {
++ compatible = "arm,cortex-a53-pmu";
++ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-affinity = <&B53_0>, <&B53_1>,
++ <&B53_2>, <&B53_3>;
++ };
++
++ clocks: clocks {
++ periph_clk: periph-clk {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <200000000>;
++ };
++ uart_clk: uart-clk {
++ compatible = "fixed-factor-clock";
++ #clock-cells = <0>;
++ clocks = <&periph_clk>;
++ clock-div = <4>;
++ clock-mult = <1>;
++ };
++ };
++
++ psci {
++ compatible = "arm,psci-0.2";
++ method = "smc";
++ };
++
++ axi@81000000 {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x0 0x0 0x81000000 0x8000>;
++
++ gic: interrupt-controller@1000 {
++ compatible = "arm,gic-400";
++ #interrupt-cells = <3>;
++ interrupt-controller;
++ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
++ reg = <0x1000 0x1000>,
++ <0x2000 0x2000>,
++ <0x4000 0x2000>,
++ <0x6000 0x2000>;
++ };
++ };
++
++ bus@ff800000 {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x0 0x0 0xff800000 0x800000>;
++
++ uart0: serial@12000 {
++ compatible = "arm,pl011", "arm,primecell";
++ reg = <0x12000 0x1000>;
++ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&uart_clk>, <&uart_clk>;
++ clock-names = "uartclk", "apb_pclk";
++ status = "disabled";
++ };
++ };
++};
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
+@@ -0,0 +1,30 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright 2022 Broadcom Ltd.
++ */
++
++/dts-v1/;
++
++#include "bcm63158.dtsi"
++
++/ {
++ model = "Broadcom BCM963158 Reference Board";
++ compatible = "brcm,bcm963158", "brcm,bcm63158", "brcm,bcmbca";
++
++ aliases {
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ memory@0 {
++ device_type = "memory";
++ reg = <0x0 0x0 0x0 0x08000000>;
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
+++ /dev/null
-From ea559c81b61603d4044df6f826f10a832c42c98c Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Wed, 15 Jun 2022 17:52:59 -0700
-Subject: [PATCH] arm64: dts: broadcom: align gpio-key node names with dtschema
-
-The node names should be generic and DT schema expects certain pattern
-(e.g. with key/button/switch).
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Link: https://lore.kernel.org/r/20220616005333.18491-6-krzysztof.kozlowski@linaro.org
----
- .../broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts | 8 ++++----
- .../boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 8 ++++----
- 2 files changed, 8 insertions(+), 8 deletions(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
-@@ -83,25 +83,25 @@
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
-- brightness {
-+ key-brightness {
- label = "LEDs";
- linux,code = <KEY_BRIGHTNESS_ZERO>;
- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
- };
-
-- wps {
-+ key-wps {
- label = "WPS";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
- };
-
-- wifi {
-+ key-wifi {
- label = "WiFi";
- linux,code = <KEY_RFKILL>;
- gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
- };
-
-- restart {
-+ key-restart {
- label = "Reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-@@ -18,25 +18,25 @@
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
-- wifi {
-+ key-wifi {
- label = "WiFi";
- linux,code = <KEY_RFKILL>;
- gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
- };
-
-- wps {
-+ key-wps {
- label = "WPS";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
- };
-
-- restart {
-+ key-restart {
- label = "Reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
- };
-
-- brightness {
-+ key-brightness {
- label = "LEDs";
- linux,code = <KEY_BRIGHTNESS_ZERO>;
- gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
--- /dev/null
+From 1ba56aeb391401c4cb2126c39f90b3cdbfabdb3f Mon Sep 17 00:00:00 2001
+From: William Zhang <william.zhang@broadcom.com>
+Date: Wed, 1 Jun 2022 13:17:34 -0700
+Subject: [PATCH] arm64: dts: Add DTS files for bcmbca SoC BCM4912
+
+Add DTS for ARMv8 based broadband SoC BCM4912. bcm4912.dtsi is the
+SoC description DTS header and bcm94912.dts is a simple DTS file for
+Broadcom BCM94912 Reference board that only enable the UART port.
+
+Signed-off-by: William Zhang <william.zhang@broadcom.com>
+Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 3 +-
+ .../boot/dts/broadcom/bcmbca/bcm4912.dtsi | 128 ++++++++++++++++++
+ .../boot/dts/broadcom/bcmbca/bcm94912.dts | 30 ++++
+ 3 files changed, 160 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
+ create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
+@@ -1,2 +1,3 @@
+ # SPDX-License-Identifier: GPL-2.0
+-dtb-$(CONFIG_ARCH_BCMBCA) += bcm963158.dtb
++dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dtb \
++ bcm963158.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
+@@ -0,0 +1,128 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright 2022 Broadcom Ltd.
++ */
++
++#include <dt-bindings/interrupt-controller/irq.h>
++#include <dt-bindings/interrupt-controller/arm-gic.h>
++
++/ {
++ compatible = "brcm,bcm4912", "brcm,bcmbca";
++ #address-cells = <2>;
++ #size-cells = <2>;
++
++ interrupt-parent = <&gic>;
++
++ cpus {
++ #address-cells = <2>;
++ #size-cells = <0>;
++
++ B53_0: cpu@0 {
++ compatible = "brcm,brahma-b53";
++ device_type = "cpu";
++ reg = <0x0 0x0>;
++ next-level-cache = <&L2_0>;
++ enable-method = "psci";
++ };
++
++ B53_1: cpu@1 {
++ compatible = "brcm,brahma-b53";
++ device_type = "cpu";
++ reg = <0x0 0x1>;
++ next-level-cache = <&L2_0>;
++ enable-method = "psci";
++ };
++
++ B53_2: cpu@2 {
++ compatible = "brcm,brahma-b53";
++ device_type = "cpu";
++ reg = <0x0 0x2>;
++ next-level-cache = <&L2_0>;
++ enable-method = "psci";
++ };
++
++ B53_3: cpu@3 {
++ compatible = "brcm,brahma-b53";
++ device_type = "cpu";
++ reg = <0x0 0x3>;
++ next-level-cache = <&L2_0>;
++ enable-method = "psci";
++ };
++
++ L2_0: l2-cache0 {
++ compatible = "cache";
++ };
++ };
++
++ timer {
++ compatible = "arm,armv8-timer";
++ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
++ };
++
++ pmu: pmu {
++ compatible = "arm,cortex-a53-pmu";
++ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-affinity = <&B53_0>, <&B53_1>,
++ <&B53_2>, <&B53_3>;
++ };
++
++ clocks: clocks {
++ periph_clk: periph-clk {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <200000000>;
++ };
++ uart_clk: uart-clk {
++ compatible = "fixed-factor-clock";
++ #clock-cells = <0>;
++ clocks = <&periph_clk>;
++ clock-div = <4>;
++ clock-mult = <1>;
++ };
++ };
++
++ psci {
++ compatible = "arm,psci-0.2";
++ method = "smc";
++ };
++
++ axi@81000000 {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x0 0x0 0x81000000 0x8000>;
++
++ gic: interrupt-controller@1000 {
++ compatible = "arm,gic-400";
++ #interrupt-cells = <3>;
++ interrupt-controller;
++ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
++ reg = <0x1000 0x1000>,
++ <0x2000 0x2000>,
++ <0x4000 0x2000>,
++ <0x6000 0x2000>;
++ };
++ };
++
++ bus@ff800000 {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x0 0x0 0xff800000 0x800000>;
++
++ uart0: serial@12000 {
++ compatible = "arm,pl011", "arm,primecell";
++ reg = <0x12000 0x1000>;
++ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&uart_clk>, <&uart_clk>;
++ clock-names = "uartclk", "apb_pclk";
++ status = "disabled";
++ };
++ };
++};
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
+@@ -0,0 +1,30 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright 2022 Broadcom Ltd.
++ */
++
++/dts-v1/;
++
++#include "bcm4912.dtsi"
++
++/ {
++ model = "Broadcom BCM94912 Reference Board";
++ compatible = "brcm,bcm94912", "brcm,bcm4912", "brcm,bcmbca";
++
++ aliases {
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ memory@0 {
++ device_type = "memory";
++ reg = <0x0 0x0 0x0 0x08000000>;
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
+++ /dev/null
-From b4a544e415e9be33b37d9bfa9d9f9f4d13f553d6 Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Fri, 8 Jul 2022 11:25:06 -0700
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: Fix timer node for BCM4906 SoC
-
-The cpu mask value in interrupt property inherits from bcm4908.dtsi
-which sets to four cpus. Correct the value to two cpus for dual core
-BCM4906 SoC.
-
-Fixes: c8b404fb05dc ("arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P DTS files")
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
-@@ -9,6 +9,14 @@
- /delete-node/ cpu@3;
- };
-
-+ timer {
-+ compatible = "arm,armv8-timer";
-+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-+ };
-+
- pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
--- /dev/null
+From e663e06bd3f21e64bc2163910f626af68add6308 Mon Sep 17 00:00:00 2001
+From: Anand Gore <anand.gore@broadcom.com>
+Date: Wed, 1 Jun 2022 13:19:56 -0700
+Subject: [PATCH] ARM64: dts: Add DTS files for bcmbca SoC BCM6858
+
+Add DTS for ARMv8 based broadband SoC BCM6858. bcm6858.dtsi is the SoC
+description DTS header and bcm96858.dts is a simple DTS file for
+Broadcom BCM96858 Reference board that only enables the UART port.
+
+Signed-off-by: Anand Gore <anand.gore@broadcom.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 3 +-
+ .../boot/dts/broadcom/bcmbca/bcm6858.dtsi | 121 ++++++++++++++++++
+ .../boot/dts/broadcom/bcmbca/bcm96858.dts | 30 +++++
+ 3 files changed, 153 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
+ create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
+@@ -1,3 +1,4 @@
+ # SPDX-License-Identifier: GPL-2.0
+ dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dtb \
+- bcm963158.dtb
++ bcm963158.dtb \
++ bcm96858.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
+@@ -0,0 +1,121 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright 2022 Broadcom Ltd.
++ */
++
++#include <dt-bindings/interrupt-controller/irq.h>
++#include <dt-bindings/interrupt-controller/arm-gic.h>
++
++/ {
++ compatible = "brcm,bcm6858", "brcm,bcmbca";
++ #address-cells = <2>;
++ #size-cells = <2>;
++
++ interrupt-parent = <&gic>;
++
++ cpus {
++ #address-cells = <2>;
++ #size-cells = <0>;
++
++ B53_0: cpu@0 {
++ compatible = "brcm,brahma-b53";
++ device_type = "cpu";
++ reg = <0x0 0x0>;
++ next-level-cache = <&L2_0>;
++ enable-method = "psci";
++ };
++
++ B53_1: cpu@1 {
++ compatible = "brcm,brahma-b53";
++ device_type = "cpu";
++ reg = <0x0 0x1>;
++ next-level-cache = <&L2_0>;
++ enable-method = "psci";
++ };
++
++ B53_2: cpu@2 {
++ compatible = "brcm,brahma-b53";
++ device_type = "cpu";
++ reg = <0x0 0x2>;
++ next-level-cache = <&L2_0>;
++ enable-method = "psci";
++ };
++
++ B53_3: cpu@3 {
++ compatible = "brcm,brahma-b53";
++ device_type = "cpu";
++ reg = <0x0 0x3>;
++ next-level-cache = <&L2_0>;
++ enable-method = "psci";
++ };
++ L2_0: l2-cache0 {
++ compatible = "cache";
++ };
++ };
++
++ timer {
++ compatible = "arm,armv8-timer";
++ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
++ };
++
++ pmu: pmu {
++ compatible = "arm,armv8-pmuv3";
++ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-affinity = <&B53_0>, <&B53_1>,
++ <&B53_2>, <&B53_3>;
++ };
++
++ clocks: clocks {
++ periph_clk:periph-clk {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <200000000>;
++ };
++ };
++
++ psci {
++ compatible = "arm,psci-0.2";
++ method = "smc";
++ };
++
++ axi@81000000 {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x0 0x0 0x81000000 0x8000>;
++
++ gic: interrupt-controller@1000 {
++ compatible = "arm,gic-400";
++ #interrupt-cells = <3>;
++ interrupt-controller;
++ reg = <0x1000 0x1000>, /* GICD */
++ <0x2000 0x2000>, /* GICC */
++ <0x4000 0x2000>, /* GICH */
++ <0x6000 0x2000>; /* GICV */
++ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
++ IRQ_TYPE_LEVEL_HIGH)>;
++ };
++ };
++
++ bus@ff800000 {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x0 0x0 0xff800000 0x62000>;
++
++ uart0: serial@640 {
++ compatible = "brcm,bcm6345-uart";
++ reg = <0x640 0x18>;
++ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&periph_clk>;
++ clock-names = "refclk";
++ status = "disabled";
++ };
++ };
++};
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
+@@ -0,0 +1,30 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright 2022 Broadcom Ltd.
++ */
++
++/dts-v1/;
++
++#include "bcm6858.dtsi"
++
++/ {
++ model = "Broadcom BCM96858 Reference Board";
++ compatible = "brcm,bcm96858", "brcm,bcm6858", "brcm,bcmbca";
++
++ aliases {
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ memory@0 {
++ device_type = "memory";
++ reg = <0x0 0x0 0x0 0x08000000>;
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
+++ /dev/null
-From 8bd582ae9a71d7f14c4e0c735b2eacaf7516d626 Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Fri, 8 Jul 2022 11:25:07 -0700
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: Fix cpu node for smp boot
-
-Add spin-table enable-method and cpu-release-addr properties for
-cpu0 node. This is required by all ARMv8 SoC. Otherwise some
-bootloader like u-boot can not update cpu-release-addr and linux
-fails to start up secondary cpus.
-
-Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -29,6 +29,8 @@
- device_type = "cpu";
- compatible = "brcm,brahma-b53";
- reg = <0x0>;
-+ enable-method = "spin-table";
-+ cpu-release-addr = <0x0 0xfff8>;
- next-level-cache = <&l2>;
- };
-
--- /dev/null
+From 82a58061ada60058ec00113c179380f945914709 Mon Sep 17 00:00:00 2001
+From: William Zhang <william.zhang@broadcom.com>
+Date: Wed, 8 Jun 2022 11:00:59 -0700
+Subject: [PATCH] arm64: dts: Add DTS files for bcmbca SoC BCM63146
+
+Add DTS for ARMv8 based broadband SoC BCM63146. bcm63146.dtsi is the
+SoC description DTS header and bcm963146.dts is a simple DTS file for
+Broadcom BCM963146 Reference board that only enable the UART port.
+
+Signed-off-by: William Zhang <william.zhang@broadcom.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 3 +-
+ .../boot/dts/broadcom/bcmbca/bcm63146.dtsi | 110 ++++++++++++++++++
+ .../boot/dts/broadcom/bcmbca/bcm963146.dts | 30 +++++
+ 3 files changed, 142 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
+ create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
+@@ -1,4 +1,5 @@
+ # SPDX-License-Identifier: GPL-2.0
+ dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dtb \
+ bcm963158.dtb \
+- bcm96858.dtb
++ bcm96858.dtb \
++ bcm963146.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
+@@ -0,0 +1,110 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright 2022 Broadcom Ltd.
++ */
++
++#include <dt-bindings/interrupt-controller/irq.h>
++#include <dt-bindings/interrupt-controller/arm-gic.h>
++
++/ {
++ compatible = "brcm,bcm63146", "brcm,bcmbca";
++ #address-cells = <2>;
++ #size-cells = <2>;
++
++ interrupt-parent = <&gic>;
++
++ cpus {
++ #address-cells = <2>;
++ #size-cells = <0>;
++
++ B53_0: cpu@0 {
++ compatible = "brcm,brahma-b53";
++ device_type = "cpu";
++ reg = <0x0 0x0>;
++ next-level-cache = <&L2_0>;
++ enable-method = "psci";
++ };
++
++ B53_1: cpu@1 {
++ compatible = "brcm,brahma-b53";
++ device_type = "cpu";
++ reg = <0x0 0x1>;
++ next-level-cache = <&L2_0>;
++ enable-method = "psci";
++ };
++
++ L2_0: l2-cache0 {
++ compatible = "cache";
++ };
++ };
++
++ timer {
++ compatible = "arm,armv8-timer";
++ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
++ };
++
++ pmu: pmu {
++ compatible = "arm,cortex-a53-pmu";
++ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-affinity = <&B53_0>, <&B53_1>;
++ };
++
++ clocks: clocks {
++ periph_clk: periph-clk {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <200000000>;
++ };
++ uart_clk: uart-clk {
++ compatible = "fixed-factor-clock";
++ #clock-cells = <0>;
++ clocks = <&periph_clk>;
++ clock-div = <4>;
++ clock-mult = <1>;
++ };
++ };
++
++ psci {
++ compatible = "arm,psci-0.2";
++ method = "smc";
++ };
++
++ axi@81000000 {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x0 0x0 0x81000000 0x8000>;
++
++ gic: interrupt-controller@1000 {
++ compatible = "arm,gic-400";
++ #interrupt-cells = <3>;
++ interrupt-controller;
++ reg = <0x1000 0x1000>,
++ <0x2000 0x2000>,
++ <0x4000 0x2000>,
++ <0x6000 0x2000>;
++ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
++ IRQ_TYPE_LEVEL_HIGH)>;
++ };
++ };
++
++ bus@ff800000 {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x0 0x0 0xff800000 0x800000>;
++
++ uart0: serial@12000 {
++ compatible = "arm,pl011", "arm,primecell";
++ reg = <0x12000 0x1000>;
++ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&uart_clk>, <&uart_clk>;
++ clock-names = "uartclk", "apb_pclk";
++ status = "disabled";
++ };
++ };
++};
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
+@@ -0,0 +1,30 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright 2022 Broadcom Ltd.
++ */
++
++/dts-v1/;
++
++#include "bcm63146.dtsi"
++
++/ {
++ model = "Broadcom BCM963146 Reference Board";
++ compatible = "brcm,bcm963146", "brcm,bcm63146", "brcm,bcmbca";
++
++ aliases {
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ memory@0 {
++ device_type = "memory";
++ reg = <0x0 0x0 0x0 0x08000000>;
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
--- /dev/null
+From 64eca7ad058cff861b48cdead8dee40dfc284e9e Mon Sep 17 00:00:00 2001
+From: William Zhang <william.zhang@broadcom.com>
+Date: Wed, 8 Jun 2022 11:04:36 -0700
+Subject: [PATCH] arm64: dts: Add DTS files for bcmbca SoC BCM6856
+
+Add DTS for ARMv8 based broadband SoC BCM6856. bcm6856.dtsi is the
+SoC description DTS header and bcm96856.dts is a simple DTS file for
+Broadcom BCM96956 Reference board that only enable the UART port.
+
+Signed-off-by: William Zhang <william.zhang@broadcom.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 3 +-
+ .../boot/dts/broadcom/bcmbca/bcm6856.dtsi | 103 ++++++++++++++++++
+ .../boot/dts/broadcom/bcmbca/bcm96856.dts | 30 +++++
+ 3 files changed, 135 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
+ create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
+@@ -2,4 +2,5 @@
+ dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dtb \
+ bcm963158.dtb \
+ bcm96858.dtb \
+- bcm963146.dtb
++ bcm963146.dtb \
++ bcm96856.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
+@@ -0,0 +1,103 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright 2022 Broadcom Ltd.
++ */
++
++#include <dt-bindings/interrupt-controller/irq.h>
++#include <dt-bindings/interrupt-controller/arm-gic.h>
++
++/ {
++ compatible = "brcm,bcm6856", "brcm,bcmbca";
++ #address-cells = <2>;
++ #size-cells = <2>;
++
++ interrupt-parent = <&gic>;
++
++ cpus {
++ #address-cells = <2>;
++ #size-cells = <0>;
++
++ B53_0: cpu@0 {
++ compatible = "brcm,brahma-b53";
++ device_type = "cpu";
++ reg = <0x0 0x0>;
++ next-level-cache = <&L2_0>;
++ enable-method = "psci";
++ };
++
++ B53_1: cpu@1 {
++ compatible = "brcm,brahma-b53";
++ device_type = "cpu";
++ reg = <0x0 0x1>;
++ next-level-cache = <&L2_0>;
++ enable-method = "psci";
++ };
++
++ L2_0: l2-cache0 {
++ compatible = "cache";
++ };
++ };
++
++ timer {
++ compatible = "arm,armv8-timer";
++ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
++ };
++
++ pmu: pmu {
++ compatible = "arm,cortex-a53-pmu";
++ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-affinity = <&B53_0>, <&B53_1>;
++ };
++
++ clocks: clocks {
++ periph_clk:periph-clk {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <200000000>;
++ };
++ };
++
++ psci {
++ compatible = "arm,psci-0.2";
++ method = "smc";
++ };
++
++ axi@81000000 {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x0 0x0 0x81000000 0x8000>;
++
++ gic: interrupt-controller@1000 {
++ compatible = "arm,gic-400";
++ #interrupt-cells = <3>;
++ interrupt-controller;
++ reg = <0x1000 0x1000>, /* GICD */
++ <0x2000 0x2000>, /* GICC */
++ <0x4000 0x2000>, /* GICH */
++ <0x6000 0x2000>; /* GICV */
++ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
++ IRQ_TYPE_LEVEL_HIGH)>;
++ };
++ };
++
++ bus@ff800000 {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x0 0x0 0xff800000 0x800000>;
++
++ uart0: serial@640 {
++ compatible = "brcm,bcm6345-uart";
++ reg = <0x640 0x18>;
++ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&periph_clk>;
++ clock-names = "refclk";
++ status = "disabled";
++ };
++ };
++};
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
+@@ -0,0 +1,30 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright 2022 Broadcom Ltd.
++ */
++
++/dts-v1/;
++
++#include "bcm6856.dtsi"
++
++/ {
++ model = "Broadcom BCM96856 Reference Board";
++ compatible = "brcm,bcm96856", "brcm,bcm6856", "brcm,bcmbca";
++
++ aliases {
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ memory@0 {
++ device_type = "memory";
++ reg = <0x0 0x0 0x0 0x08000000>;
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
--- /dev/null
+From eab6bb0994b806525fc5e362e8b865f61c4a9e20 Mon Sep 17 00:00:00 2001
+From: William Zhang <william.zhang@broadcom.com>
+Date: Thu, 9 Jun 2022 17:15:33 -0700
+Subject: [PATCH] arm64: dts: Add DTS files for bcmbca SoC BCM6813
+
+Add DTS for ARMv8 based broadband SoC BCM6813. bcm6813.dtsi is the
+SoC description DTS header and bcm96813.dts is a simple DTS file for
+Broadcom BCM96813 Reference board that only enable the UART port.
+
+Signed-off-by: William Zhang <william.zhang@broadcom.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 3 +-
+ .../boot/dts/broadcom/bcmbca/bcm6813.dtsi | 128 ++++++++++++++++++
+ .../boot/dts/broadcom/bcmbca/bcm96813.dts | 30 ++++
+ 3 files changed, 160 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
+ create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
+@@ -3,4 +3,5 @@ dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dt
+ bcm963158.dtb \
+ bcm96858.dtb \
+ bcm963146.dtb \
+- bcm96856.dtb
++ bcm96856.dtb \
++ bcm96813.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
+@@ -0,0 +1,128 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright 2022 Broadcom Ltd.
++ */
++
++#include <dt-bindings/interrupt-controller/irq.h>
++#include <dt-bindings/interrupt-controller/arm-gic.h>
++
++/ {
++ compatible = "brcm,bcm6813", "brcm,bcmbca";
++ #address-cells = <2>;
++ #size-cells = <2>;
++
++ interrupt-parent = <&gic>;
++
++ cpus {
++ #address-cells = <2>;
++ #size-cells = <0>;
++
++ B53_0: cpu@0 {
++ compatible = "brcm,brahma-b53";
++ device_type = "cpu";
++ reg = <0x0 0x0>;
++ next-level-cache = <&L2_0>;
++ enable-method = "psci";
++ };
++
++ B53_1: cpu@1 {
++ compatible = "brcm,brahma-b53";
++ device_type = "cpu";
++ reg = <0x0 0x1>;
++ next-level-cache = <&L2_0>;
++ enable-method = "psci";
++ };
++
++ B53_2: cpu@2 {
++ compatible = "brcm,brahma-b53";
++ device_type = "cpu";
++ reg = <0x0 0x2>;
++ next-level-cache = <&L2_0>;
++ enable-method = "psci";
++ };
++
++ B53_3: cpu@3 {
++ compatible = "brcm,brahma-b53";
++ device_type = "cpu";
++ reg = <0x0 0x3>;
++ next-level-cache = <&L2_0>;
++ enable-method = "psci";
++ };
++
++ L2_0: l2-cache0 {
++ compatible = "cache";
++ };
++ };
++
++ timer {
++ compatible = "arm,armv8-timer";
++ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
++ };
++
++ pmu: pmu {
++ compatible = "arm,cortex-a53-pmu";
++ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-affinity = <&B53_0>, <&B53_1>,
++ <&B53_2>, <&B53_3>;
++ };
++
++ clocks: clocks {
++ periph_clk: periph-clk {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <200000000>;
++ };
++ uart_clk: uart-clk {
++ compatible = "fixed-factor-clock";
++ #clock-cells = <0>;
++ clocks = <&periph_clk>;
++ clock-div = <4>;
++ clock-mult = <1>;
++ };
++ };
++
++ psci {
++ compatible = "arm,psci-0.2";
++ method = "smc";
++ };
++
++ axi@81000000 {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x0 0x0 0x81000000 0x8000>;
++
++ gic: interrupt-controller@1000 {
++ compatible = "arm,gic-400";
++ #interrupt-cells = <3>;
++ interrupt-controller;
++ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
++ reg = <0x1000 0x1000>,
++ <0x2000 0x2000>,
++ <0x4000 0x2000>,
++ <0x6000 0x2000>;
++ };
++ };
++
++ bus@ff800000 {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x0 0x0 0xff800000 0x800000>;
++
++ uart0: serial@12000 {
++ compatible = "arm,pl011", "arm,primecell";
++ reg = <0x12000 0x1000>;
++ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&uart_clk>, <&uart_clk>;
++ clock-names = "uartclk", "apb_pclk";
++ status = "disabled";
++ };
++ };
++};
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
+@@ -0,0 +1,30 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright 2022 Broadcom Ltd.
++ */
++
++/dts-v1/;
++
++#include "bcm6813.dtsi"
++
++/ {
++ model = "Broadcom BCM96813 Reference Board";
++ compatible = "brcm,bcm96813", "brcm,bcm6813", "brcm,bcmbca";
++
++ aliases {
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ memory@0 {
++ device_type = "memory";
++ reg = <0x0 0x0 0x0 0x08000000>;
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
--- /dev/null
+From ea559c81b61603d4044df6f826f10a832c42c98c Mon Sep 17 00:00:00 2001
+From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Date: Wed, 15 Jun 2022 17:52:59 -0700
+Subject: [PATCH] arm64: dts: broadcom: align gpio-key node names with dtschema
+
+The node names should be generic and DT schema expects certain pattern
+(e.g. with key/button/switch).
+
+Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Link: https://lore.kernel.org/r/20220616005333.18491-6-krzysztof.kozlowski@linaro.org
+---
+ .../broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts | 8 ++++----
+ .../boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 8 ++++----
+ 2 files changed, 8 insertions(+), 8 deletions(-)
+
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
+@@ -83,25 +83,25 @@
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+- brightness {
++ key-brightness {
+ label = "LEDs";
+ linux,code = <KEY_BRIGHTNESS_ZERO>;
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ };
+
+- wps {
++ key-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+
+- wifi {
++ key-wifi {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ };
+
+- restart {
++ key-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+@@ -18,25 +18,25 @@
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+- wifi {
++ key-wifi {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+ };
+
+- wps {
++ key-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ };
+
+- restart {
++ key-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+ };
+
+- brightness {
++ key-brightness {
+ label = "LEDs";
+ linux,code = <KEY_BRIGHTNESS_ZERO>;
+ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
--- /dev/null
+From b4a544e415e9be33b37d9bfa9d9f9f4d13f553d6 Mon Sep 17 00:00:00 2001
+From: William Zhang <william.zhang@broadcom.com>
+Date: Fri, 8 Jul 2022 11:25:06 -0700
+Subject: [PATCH] arm64: dts: broadcom: bcm4908: Fix timer node for BCM4906 SoC
+
+The cpu mask value in interrupt property inherits from bcm4908.dtsi
+which sets to four cpus. Correct the value to two cpus for dual core
+BCM4906 SoC.
+
+Fixes: c8b404fb05dc ("arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P DTS files")
+Signed-off-by: William Zhang <william.zhang@broadcom.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
+@@ -9,6 +9,14 @@
+ /delete-node/ cpu@3;
+ };
+
++ timer {
++ compatible = "arm,armv8-timer";
++ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
++ };
++
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
--- /dev/null
+From 8bd582ae9a71d7f14c4e0c735b2eacaf7516d626 Mon Sep 17 00:00:00 2001
+From: William Zhang <william.zhang@broadcom.com>
+Date: Fri, 8 Jul 2022 11:25:07 -0700
+Subject: [PATCH] arm64: dts: broadcom: bcm4908: Fix cpu node for smp boot
+
+Add spin-table enable-method and cpu-release-addr properties for
+cpu0 node. This is required by all ARMv8 SoC. Otherwise some
+bootloader like u-boot can not update cpu-release-addr and linux
+fails to start up secondary cpus.
+
+Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
+Signed-off-by: William Zhang <william.zhang@broadcom.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+@@ -29,6 +29,8 @@
+ device_type = "cpu";
+ compatible = "brcm,brahma-b53";
+ reg = <0x0>;
++ enable-method = "spin-table";
++ cpu-release-addr = <0x0 0xfff8>;
+ next-level-cache = <&l2>;
+ };
+
--- /dev/null
+From f3f575c4bef95384e68de552c7b29938fd0d9201 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Wed, 13 Jul 2022 22:03:51 +0200
+Subject: [PATCH] arm64: dts: Add base DTS file for bcmbca device Asus
+ GT-AX6000
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It's a home router with 1 GiB of RAM, 6 Ethernet ports, 2 USB ports.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Acked-by: William Zhang <william.zhang@broadcom.com>
+Link: https://lore.kernel.org/r/20220713200351.28526-2-zajec5@gmail.com
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 4 +++-
+ .../bcmbca/bcm4912-asus-gt-ax6000.dts | 19 +++++++++++++++++++
+ 2 files changed, 22 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
+@@ -1,5 +1,7 @@
+ # SPDX-License-Identifier: GPL-2.0
+-dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dtb \
++dtb-$(CONFIG_ARCH_BCMBCA) += \
++ bcm4912-asus-gt-ax6000.dtb \
++ bcm94912.dtb \
+ bcm963158.dtb \
+ bcm96858.dtb \
+ bcm963146.dtb \
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts
+@@ -0,0 +1,19 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++
++/dts-v1/;
++
++#include "bcm4912.dtsi"
++
++/ {
++ compatible = "asus,gt-ax6000", "brcm,bcm4912", "brcm,bcmbca";
++ model = "Asus GT-AX6000";
++
++ memory@0 {
++ device_type = "memory";
++ reg = <0x00 0x00 0x00 0x40000000>;
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
projects / openwrt / staging / pepe2k.git / commitdiff