ipq40xx: fix invalid GPIO numbers since kernel 6.6

The bump to kernel 6.6 increased the GPIO base from
412 to 512 on this target.

We need to compensate for that in the GPIO numbers being passed
to uci to fix following kernel report:

[   24.176183] export_store: invalid GPIO 423

Tested on a Wallys DR40x9 board.

Please note that:

Boards "rtl30vw" and "wpj428" are not being altered here.
They define GPIO numbers which are even below the previous
base of 412 which looks wrong.
Actual testing on these boards should be conducted to validate
and optionally fix GPIO numbering.

Suggested-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches b/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches
index ee369d596307fee9397fdeee3572c20289a49ff5..226785d46c43dfc79a0e1d09d57ee4a63ef43198 100644 (file)
--- a/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches
@@ -13,33 +13,33 @@ cellc,rtl30vw)
        ucidef_add_gpio_switch "usb_vcc" "USB power" "401" "0"
        ;;
 cilab,meshpoint-one)
-       ucidef_add_gpio_switch "poe_passtrough" "POE passtrough enable" "413" "1"
+       ucidef_add_gpio_switch "poe_passtrough" "POE passtrough enable" "513" "1"
        ;;
 compex,wpj428)
        ucidef_add_gpio_switch "sim_card_select" "SIM card select" "3" "0"
        ;;
 mikrotik,cap-ac)
-       ucidef_add_gpio_switch "poe_passtrough" "POE passtrough enable" "414" "0"
+       ucidef_add_gpio_switch "poe_passtrough" "POE passtrough enable" "514" "0"
        ;;
 mikrotik,hap-ac3)
-       ucidef_add_gpio_switch "poe_passtrough" "PoE Passthrough" "452" "0"
+       ucidef_add_gpio_switch "poe_passtrough" "PoE Passthrough" "552" "0"
        ;;
 mikrotik,hap-ac3-lte6-kit)
-       ucidef_add_gpio_switch "lte_ant_sw1" "LTE Antenna SW 1" "457" "0"
-       ucidef_add_gpio_switch "lte_ant_sw2" "LTE Antenna SW 2" "458" "0"
-       ucidef_add_gpio_switch "lte_reset" "LTE reset" "461" "0"
+       ucidef_add_gpio_switch "lte_ant_sw1" "LTE Antenna SW 1" "557" "0"
+       ucidef_add_gpio_switch "lte_ant_sw2" "LTE Antenna SW 2" "558" "0"
+       ucidef_add_gpio_switch "lte_reset" "LTE reset" "561" "0"
        ;;
 sony,ncp-hg100-cellular)
-       ucidef_add_gpio_switch "uart_dbgcon_en" "debug console enable" "427" "1"
+       ucidef_add_gpio_switch "uart_dbgcon_en" "debug console enable" "527" "1"
        ;;
 wallys,dr40x9)
-       ucidef_add_gpio_switch "sim_card_select" "SIM card select" "423" "0"
+       ucidef_add_gpio_switch "sim_card_select" "SIM card select" "523" "0"
        ;;
 zte,mf282plus|\
 zte,mf286d|\
 zte,mf287pro|\
 zte,mf289f)
-       ucidef_add_gpio_switch "power_btn_block" "Power button blocker" "421" "0"
+       ucidef_add_gpio_switch "power_btn_block" "Power button blocker" "521" "0"
        ;;
 esac