ramips: Add support for 8devices Carambola dev board.

Add support for 8devices Carambola dev board.

The Carambola is a small RT3050-based development board with two
ethernet ports, on-board chip antenna, usb and plenty of accessible
gpio ports, sold by 8devices.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33303

diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 5dadd71018147b201729dbf3275dabb36ca1b562..bb7f66284e3c491117e7ab27c3b1579be5827952 100644 (file)
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -58,6 +58,7 @@ case "$FIRMWARE" in
        all5002 | \
        argus-atp52b | \
        bc2 | \
+       carambola | \
        dir-615-h1 | \
        dir-620-a1 | \
        esr-9753 | \

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index 6542d021eecb17f63a14814b64051c1a6516598e..d20b60af06054e1b30b6b7a231f4692f1d4e9b14 100755 (executable)
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -178,6 +178,7 @@ ramips_setup_macs()
                ;;
 
        all0239-3g | \
+       carambola | \
        w502u)
                lan_mac=$(ramips_get_mac_binary factory 40)
                wan_mac=$(ramips_get_mac_binary factory 46)

diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index 8c2b03954741ecf7759d1a7164824f49a31fdd00..591c549d140db98f3526e7143a9d63672f4988d5 100644 (file)
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -37,6 +37,7 @@ preinit_set_mac_address() {
        all0239-3g |\
        all0256n |\
        all5002 |\
+       carambola |\
        dir-615-h1 |\
        fonera20n |\
        hw550-3g |\

diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index b07f4e94666bdfdfb80033c04d6e217a15018517..90c28b7ab69f654f055f1269963c75293605e9e2 100755 (executable)
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -47,6 +47,9 @@ ramips_board_name() {
        machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo)
 
        case "$machine" in
+       *"8devices Carambola")
+               name="carambola"
+               ;;
        *"Edimax 3g-6200n")
                name="3g-6200n"
                ;;

diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index d7380f02970146081cca2911e0bc94d5a3ce20a5..5ebf42a85d02e6ac5c5405de2ac29f60604baa05 100755 (executable)
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -19,6 +19,7 @@ platform_check_image() {
        all0256n | \
        all5002 | \
        bc2 | \
+       carambola | \
        dir-300-b1 | \
        dir-600-b1 | \
        dir-600-b2 | \

diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
index 89b437398ede1ee573a8841da7d69187051fc791..2d5a08f386b383e62acba6432ac7a14d54fa915a 100644 (file)
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
@@ -23,6 +23,7 @@ enum ramips_mach_type {
        /* RT3050 based machines */
        RAMIPS_MACH_3G_6200N,           /* Edimax 3G-6200N */
        RAMIPS_MACH_ALL0256N,           /* Allnet ALL0256N */
+       RAMIPS_MACH_CARAMBOLA,          /* 8devices Carambola */
        RAMIPS_MACH_DIR_300_B1,         /* D-Link DIR-300 B1 */
        RAMIPS_MACH_DIR_600_B1,         /* D-Link DIR-600 B1 */
        RAMIPS_MACH_DIR_600_B2,         /* D-Link DIR-600 B2 */

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
index 5837196f6e0727fe6fa33125c208a3439f14f5e0..945639b97fed202ddafd312dd0b46db627bf5a27 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
@@ -2,6 +2,11 @@ if RALINK_RT305X
 
 menu "Ralink RT350x machine selection"
 
+config RT305X_MACH_CARAMBOLA
+       bool "8devices Carambola dev board support"
+       select RALINK_DEV_GPIO_BUTTONS
+       select RALINK_DEV_GPIO_LEDS
+
 config RT305X_MACH_3G_6200N
        bool "Edimax 3G-6200N board support"
        select RALINK_DEV_GPIO_BUTTONS

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
index 0dcb1f9e3d583a67a896712b74cf509beed3ac02..c7c27cb74089e10883f11e7c53e469e1f7a4be1f 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_RT305X_MACH_ARGUS_ATP52B)        += mach-argus-atp52b.o
 obj-$(CONFIG_RT305X_MACH_BC2)          += mach-bc2.o
 obj-$(CONFIG_RT305X_MACH_ALL0256N)     += mach-all0256n.o
 obj-$(CONFIG_RT305X_MACH_ALL5002)      += mach-all5002.o
+obj-$(CONFIG_RT305X_MACH_CARAMBOLA)    += mach-carambola.o
 obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o
 obj-$(CONFIG_RT305X_MACH_DIR_615_H1)   += mach-dir-615-h1.o
 obj-$(CONFIG_RT305X_MACH_DAP_1350)     += mach-dap-1350.o

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-carambola.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-carambola.c
new file mode 100644 (file)
index 0000000..c24527a
--- /dev/null
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-carambola.c
@@ -0,0 +1,42 @@
+/*
+ *  8devices Carambola dev board support
+ *
+ *  Copyright (C) 2012 Tobias Diedrich <ranma+openwrt@tdiedrich.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>
+
+#include "devices.h"
+
+static void __init carambola_init(void)
+{
+       /* Ugh, inverted logic...
+        * This actually puts the pins into GPIO mode rather I2C, SPI, ... */
+       rt305x_gpio_init(RT305X_GPIO_MODE_UART0(RT305X_GPIO_MODE_GPIO) |
+                        RT305X_GPIO_MODE_I2C |
+                        RT305X_GPIO_MODE_SPI |
+                        RT305X_GPIO_MODE_JTAG |
+                        RT305X_GPIO_MODE_MDIO);
+
+       rt305x_register_flash(0);
+
+       rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE;
+       rt305x_register_ethernet();
+       rt305x_register_wifi();
+       rt305x_register_wdt();
+       rt305x_register_usb();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_CARAMBOLA, "CARAMBOLA", "8devices Carambola",
+            carambola_init);

diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index e43b501ee42eb2832f92d08d9bff472e355bd26b..d1204f3e291c08da7788baf6c66ad7ee222c292e 100644 (file)
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -403,6 +403,10 @@ define Image/Build/Profile/BC2
        $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,bc2,BC2,ttyS1,57600,phys)
 endef
 
+define Image/Build/Profile/CARAMBOLA
+       $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,carambola,CARAMBOLA,ttyS1,115200,phys)
+endef
+
 define Image/Build/Profile/DIR300B1
        $(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b)
        $(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b)
@@ -538,6 +542,7 @@ define Image/Build/Profile/Default
        $(call Image/Build/Profile/ALL5002,$(1))
        $(call Image/Build/Profile/ARGUS_ATP52B,$(1))
        $(call Image/Build/Profile/BC2,$(1))
+       $(call Image/Build/Profile/CARAMBOLA,$(1))
        $(call Image/Build/Profile/DIR300B1,$(1))
        $(call Image/Build/Profile/DIR615H1,$(1))
        $(call Image/Build/Profile/DAP1350,$(1))

diff --git a/target/linux/ramips/rt305x/config-3.3 b/target/linux/ramips/rt305x/config-3.3
index 409bdbbbee223949ce7b817d03f1dc5a416a9ea1..1e067fbddf7b4c2395eab6ad5828fbd9b21eafef 100644 (file)
--- a/target/linux/ramips/rt305x/config-3.3
+++ b/target/linux/ramips/rt305x/config-3.3
@@ -92,6 +92,7 @@ CONFIG_RT305X_MACH_ALL0256N=y
 CONFIG_RT305X_MACH_ALL5002=y
 CONFIG_RT305X_MACH_ARGUS_ATP52B=y
 CONFIG_RT305X_MACH_BC2=y
+CONFIG_RT305X_MACH_CARAMBOLA=y
 CONFIG_RT305X_MACH_DIR_300_REVB=y
 CONFIG_RT305X_MACH_DIR_615_H1=y
 CONFIG_RT305X_MACH_DAP_1350=y