CONFIG_32BIT=y
# CONFIG_64BIT is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_AR7 is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ATA=y
+# CONFIG_ATA_PIIX is not set
# CONFIG_BCM47XX is not set
-# CONFIG_BINARY_PRINTF is not set
+# CONFIG_BCM63XX is not set
CONFIG_BITREVERSE=y
CONFIG_BLK_DEV_SD=y
CONFIG_BOOT_RAW=y
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K_LIB=y
CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
-CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
CONFIG_CPU_MIPSR1=y
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K_LIB=y
CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
# CONFIG_DEBUG_FS is not set
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DEVPORT=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_EXT2_FS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_FSNOTIFY is not set
CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
-CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=y
-# CONFIG_HZ_100 is not set
CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_KORINA=y
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_MIKROTIK_RB532=y
-# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_LOONGSON is not set
# CONFIG_MACH_TX39XX is not set
# CONFIG_MACH_TX49XX is not set
# CONFIG_MACH_VR41XX is not set
CONFIG_MIKROTIK_RB532=y
+CONFIG_MIPS=y
# CONFIG_MIPS_COBALT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=4
# CONFIG_MIPS_MACHINE is not set
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_SIM is not set
-CONFIG_MIPS=y
CONFIG_MTD_BLOCK2MTD=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_AMDSTD is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND=y
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_ROOTFS_ROOT_DEV is not set
# CONFIG_MTD_ROOTFS_SPLIT is not set
# CONFIG_PROBE_INITRD_HEADER is not set
CONFIG_RC32434_WDT=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_SCSI=y
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SCSI=y
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SLOW_WORK is not set
CONFIG_SWAP_IO_SPACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
# CONFIG_TC35815 is not set
-CONFIG_TRACING_SUPPORT=y
CONFIG_TRAD_SIGNALS=y
-CONFIG_VIA_RHINE_MMIO=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
CONFIG_VIA_RHINE=y
+CONFIG_VIA_RHINE_MMIO=y
CONFIG_YAFFS_9BYTE_TAGS=y
# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
CONFIG_YAFFS_AUTO_YAFFS2=y
--- /dev/null
+--- a/arch/mips/rb532/prom.c
++++ b/arch/mips/rb532/prom.c
+@@ -67,6 +67,7 @@ static inline unsigned long tag2ul(char
+ return simple_strtoul(num, 0, 10);
+ }
+
++extern char __image_cmdline[];
+ void __init prom_setup_cmdline(void)
+ {
+ char cmd_line[CL_SIZE];
+@@ -109,6 +110,9 @@ void __init prom_setup_cmdline(void)
+ }
+ *(cp++) = ' ';
+
++ strcpy(cp,(__image_cmdline));
++ cp += strlen(__image_cmdline);
++
+ i = strlen(arcs_cmdline);
+ if (i > 0) {
+ *(cp++) = ' ';
--- /dev/null
+--- a/arch/mips/rb532/devices.c
++++ b/arch/mips/rb532/devices.c
+@@ -140,6 +140,19 @@ static struct platform_device cf_slot0 =
+ };
+
+ /* Resources and device for NAND */
++
++/*
++ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
++ * will not be able to find the kernel that we load. So set the oobinfo
++ * when creating the partitions
++ */
++static struct nand_ecclayout rb532_nand_ecclayout = {
++ .eccbytes = 6,
++ .eccpos = { 8, 9, 10, 13, 14, 15 },
++ .oobavail = 9,
++ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
++};
++
+ static int rb532_dev_ready(struct mtd_info *mtd)
+ {
+ return gpio_get_value(GPIO_RDY);
+@@ -281,6 +294,16 @@ static void __init parse_mac_addr(char *
+ /* NAND definitions */
+ #define NAND_CHIP_DELAY 25
+
++static int rb532_nand_fixup(struct mtd_info *mtd)
++{
++ struct nand_chip *chip = mtd->priv;
++
++ if (mtd->writesize == 512)
++ chip->ecc.layout = &rb532_nand_ecclayout;
++
++ return 0;
++}
++
+ static void __init rb532_nand_setup(void)
+ {
+ switch (mips_machtype) {
+@@ -300,6 +323,8 @@ static void __init rb532_nand_setup(void
+ rb532_nand_data.chip.partitions = rb532_partition_info;
+ rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
+ rb532_nand_data.chip.options = NAND_NO_AUTOINCR;
++
++ rb532_nand_data.chip.chip_fixup = &rb532_nand_fixup;
+ }
+
+
--- /dev/null
+--- a/drivers/net/korina.c
++++ b/drivers/net/korina.c
+@@ -133,6 +133,7 @@ struct korina_private {
+ int dma_halt_cnt;
+ int dma_run_cnt;
+ struct napi_struct napi;
++ struct timer_list media_check_timer;
+ struct mii_if_info mii_if;
+ struct net_device *dev;
+ int phy_addr;
+@@ -664,6 +665,15 @@ static void korina_check_media(struct ne
+ &lp->eth_regs->ethmac2);
+ }
+
++static void korina_poll_media(unsigned long data)
++{
++ struct net_device *dev = (struct net_device *) data;
++ struct korina_private *lp = netdev_priv(dev);
++
++ korina_check_media(dev, 0);
++ mod_timer(&lp->media_check_timer, jiffies + HZ);
++}
++
+ static void korina_set_carrier(struct mii_if_info *mii)
+ {
+ if (mii->force_media) {
+@@ -1034,6 +1044,7 @@ static int korina_open(struct net_device
+ dev->name, lp->und_irq);
+ goto err_free_ovr_irq;
+ }
++ mod_timer(&lp->media_check_timer, jiffies + 1);
+ out:
+ return ret;
+
+@@ -1053,6 +1064,8 @@ static int korina_close(struct net_devic
+ struct korina_private *lp = netdev_priv(dev);
+ u32 tmp;
+
++ del_timer(&lp->media_check_timer);
++
+ /* Disable interrupts */
+ disable_irq(lp->rx_irq);
+ disable_irq(lp->tx_irq);
+@@ -1176,6 +1189,7 @@ static int korina_probe(struct platform_
+ ": cannot register net device %d\n", rc);
+ goto probe_err_register;
+ }
++ setup_timer(&lp->media_check_timer, korina_poll_media, (unsigned long) dev);
+ out:
+ return rc;
+
--- /dev/null
+--- a/arch/mips/rb532/prom.c
++++ b/arch/mips/rb532/prom.c
+@@ -67,6 +67,7 @@ static inline unsigned long tag2ul(char
+ return simple_strtoul(num, 0, 10);
+ }
+
++extern char __image_cmdline[];
+ void __init prom_setup_cmdline(void)
+ {
+ char cmd_line[CL_SIZE];
+@@ -109,6 +110,9 @@ void __init prom_setup_cmdline(void)
+ }
+ *(cp++) = ' ';
+
++ strcpy(cp,(__image_cmdline));
++ cp += strlen(__image_cmdline);
++
+ i = strlen(arcs_cmdline);
+ if (i > 0) {
+ *(cp++) = ' ';
--- /dev/null
+--- a/arch/mips/rb532/devices.c
++++ b/arch/mips/rb532/devices.c
+@@ -140,6 +140,19 @@ static struct platform_device cf_slot0 =
+ };
+
+ /* Resources and device for NAND */
++
++/*
++ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
++ * will not be able to find the kernel that we load. So set the oobinfo
++ * when creating the partitions
++ */
++static struct nand_ecclayout rb532_nand_ecclayout = {
++ .eccbytes = 6,
++ .eccpos = { 8, 9, 10, 13, 14, 15 },
++ .oobavail = 9,
++ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
++};
++
+ static int rb532_dev_ready(struct mtd_info *mtd)
+ {
+ return gpio_get_value(GPIO_RDY);
+@@ -281,6 +294,16 @@ static void __init parse_mac_addr(char *
+ /* NAND definitions */
+ #define NAND_CHIP_DELAY 25
+
++static int rb532_nand_fixup(struct mtd_info *mtd)
++{
++ struct nand_chip *chip = mtd->priv;
++
++ if (mtd->writesize == 512)
++ chip->ecc.layout = &rb532_nand_ecclayout;
++
++ return 0;
++}
++
+ static void __init rb532_nand_setup(void)
+ {
+ switch (mips_machtype) {
+@@ -300,6 +323,8 @@ static void __init rb532_nand_setup(void
+ rb532_nand_data.chip.partitions = rb532_partition_info;
+ rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
+ rb532_nand_data.chip.options = NAND_NO_AUTOINCR;
++
++ rb532_nand_data.chip.chip_fixup = &rb532_nand_fixup;
+ }
+
+
+++ /dev/null
---- a/arch/mips/rb532/prom.c
-+++ b/arch/mips/rb532/prom.c
-@@ -67,6 +67,7 @@ static inline unsigned long tag2ul(char
- return simple_strtoul(num, 0, 10);
- }
-
-+extern char __image_cmdline[];
- void __init prom_setup_cmdline(void)
- {
- char cmd_line[CL_SIZE];
-@@ -109,6 +110,9 @@ void __init prom_setup_cmdline(void)
- }
- *(cp++) = ' ';
-
-+ strcpy(cp,(__image_cmdline));
-+ cp += strlen(__image_cmdline);
-+
- i = strlen(arcs_cmdline);
- if (i > 0) {
- *(cp++) = ' ';
+++ /dev/null
---- a/arch/mips/rb532/devices.c
-+++ b/arch/mips/rb532/devices.c
-@@ -140,6 +140,19 @@ static struct platform_device cf_slot0 =
- };
-
- /* Resources and device for NAND */
-+
-+/*
-+ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
-+ * will not be able to find the kernel that we load. So set the oobinfo
-+ * when creating the partitions
-+ */
-+static struct nand_ecclayout rb532_nand_ecclayout = {
-+ .eccbytes = 6,
-+ .eccpos = { 8, 9, 10, 13, 14, 15 },
-+ .oobavail = 9,
-+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-+};
-+
- static int rb532_dev_ready(struct mtd_info *mtd)
- {
- return gpio_get_value(GPIO_RDY);
-@@ -281,6 +294,16 @@ static void __init parse_mac_addr(char *
- /* NAND definitions */
- #define NAND_CHIP_DELAY 25
-
-+static int rb532_nand_fixup(struct mtd_info *mtd)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+
-+ if (mtd->writesize == 512)
-+ chip->ecc.layout = &rb532_nand_ecclayout;
-+
-+ return 0;
-+}
-+
- static void __init rb532_nand_setup(void)
- {
- switch (mips_machtype) {
-@@ -300,6 +323,8 @@ static void __init rb532_nand_setup(void
- rb532_nand_data.chip.partitions = rb532_partition_info;
- rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
- rb532_nand_data.chip.options = NAND_NO_AUTOINCR;
-+
-+ rb532_nand_data.chip.chip_fixup = &rb532_nand_fixup;
- }
-
-
+++ /dev/null
---- a/drivers/net/korina.c
-+++ b/drivers/net/korina.c
-@@ -133,6 +133,7 @@ struct korina_private {
- int dma_halt_cnt;
- int dma_run_cnt;
- struct napi_struct napi;
-+ struct timer_list media_check_timer;
- struct mii_if_info mii_if;
- struct net_device *dev;
- int phy_addr;
-@@ -664,6 +665,15 @@ static void korina_check_media(struct ne
- &lp->eth_regs->ethmac2);
- }
-
-+static void korina_poll_media(unsigned long data)
-+{
-+ struct net_device *dev = (struct net_device *) data;
-+ struct korina_private *lp = netdev_priv(dev);
-+
-+ korina_check_media(dev, 0);
-+ mod_timer(&lp->media_check_timer, jiffies + HZ);
-+}
-+
- static void korina_set_carrier(struct mii_if_info *mii)
- {
- if (mii->force_media) {
-@@ -1034,6 +1044,7 @@ static int korina_open(struct net_device
- dev->name, lp->und_irq);
- goto err_free_ovr_irq;
- }
-+ mod_timer(&lp->media_check_timer, jiffies + 1);
- out:
- return ret;
-
-@@ -1053,6 +1064,8 @@ static int korina_close(struct net_devic
- struct korina_private *lp = netdev_priv(dev);
- u32 tmp;
-
-+ del_timer(&lp->media_check_timer);
-+
- /* Disable interrupts */
- disable_irq(lp->rx_irq);
- disable_irq(lp->tx_irq);
-@@ -1176,6 +1189,7 @@ static int korina_probe(struct platform_
- ": cannot register net device %d\n", rc);
- goto probe_err_register;
- }
-+ setup_timer(&lp->media_check_timer, korina_poll_media, (unsigned long) dev);
- out:
- return rc;
-
projects / openwrt / staging / lynxis.git / commitdiff