bool "ar"
default BUSYBOX_DEFAULT_AR # needs to be improved to be able to replace binutils ar
help
- ar is an archival utility program used to create, modify, and
- extract contents from archives. In practice, it is used exclusively
- for object module archives used by compilers.
+ ar is an archival utility program used to create, modify, and
+ extract contents from archives. In practice, it is used exclusively
+ for object module archives used by compilers.
- On an x86 system, the ar applet adds about 1K.
+ On an x86 system, the ar applet adds about 1K.
- Unless you have a specific application which requires ar, you should
- probably say N here: most compilers come with their own ar utility.
+ Unless you have a specific application which requires ar, you should
+ probably say N here: most compilers come with their own ar utility.
config BUSYBOX_CONFIG_FEATURE_AR_LONG_FILENAMES
bool "Support long filenames (not needed for debs)"
default BUSYBOX_DEFAULT_FEATURE_AR_LONG_FILENAMES
depends on BUSYBOX_CONFIG_AR
help
- By default the ar format can only store the first 15 characters
- of the filename, this option removes that limitation.
- It supports the GNU ar long filename method which moves multiple long
- filenames into a the data section of a new ar entry.
+ By default the ar format can only store the first 15 characters
+ of the filename, this option removes that limitation.
+ It supports the GNU ar long filename method which moves multiple long
+ filenames into a the data section of a new ar entry.
config BUSYBOX_CONFIG_FEATURE_AR_CREATE
bool "Support archive creation"
default BUSYBOX_DEFAULT_FEATURE_AR_CREATE
depends on BUSYBOX_CONFIG_AR
help
- This enables archive creation (-c and -r) with busybox ar.
+ This enables archive creation (-c and -r) with busybox ar.
config BUSYBOX_CONFIG_UNCOMPRESS
bool "uncompress"
default BUSYBOX_DEFAULT_UNCOMPRESS # ancient
help
- uncompress is used to decompress archives created by compress.
- Not much used anymore, replaced by gzip/gunzip.
+ uncompress is used to decompress archives created by compress.
+ Not much used anymore, replaced by gzip/gunzip.
config BUSYBOX_CONFIG_GUNZIP
bool "gunzip"
default BUSYBOX_DEFAULT_GUNZIP
select BUSYBOX_CONFIG_FEATURE_GZIP_DECOMPRESS
help
- gunzip is used to decompress archives created by gzip.
- You can use the `-t' option to test the integrity of
- an archive, without decompressing it.
+ gunzip is used to decompress archives created by gzip.
+ You can use the `-t' option to test the integrity of
+ an archive, without decompressing it.
config BUSYBOX_CONFIG_ZCAT
bool "zcat"
default BUSYBOX_DEFAULT_ZCAT
select BUSYBOX_CONFIG_FEATURE_GZIP_DECOMPRESS
help
- Alias to "gunzip -c".
+ Alias to "gunzip -c".
config BUSYBOX_CONFIG_FEATURE_GUNZIP_LONG_OPTIONS
bool "Enable long options"
default BUSYBOX_DEFAULT_BUNZIP2
select BUSYBOX_CONFIG_FEATURE_BZIP2_DECOMPRESS
help
- bunzip2 is a compression utility using the Burrows-Wheeler block
- sorting text compression algorithm, and Huffman coding. Compression
- is generally considerably better than that achieved by more
- conventional LZ77/LZ78-based compressors, and approaches the
- performance of the PPM family of statistical compressors.
+ bunzip2 is a compression utility using the Burrows-Wheeler block
+ sorting text compression algorithm, and Huffman coding. Compression
+ is generally considerably better than that achieved by more
+ conventional LZ77/LZ78-based compressors, and approaches the
+ performance of the PPM family of statistical compressors.
- Unless you have a specific application which requires bunzip2, you
- should probably say N here.
+ Unless you have a specific application which requires bunzip2, you
+ should probably say N here.
config BUSYBOX_CONFIG_BZCAT
bool "bzcat"
default BUSYBOX_DEFAULT_BZCAT
select BUSYBOX_CONFIG_FEATURE_BZIP2_DECOMPRESS
help
- Alias to "bunzip2 -c".
+ Alias to "bunzip2 -c".
config BUSYBOX_CONFIG_UNLZMA
bool "unlzma"
default BUSYBOX_DEFAULT_UNLZMA
help
- unlzma is a compression utility using the Lempel-Ziv-Markov chain
- compression algorithm, and range coding. Compression
- is generally considerably better than that achieved by the bzip2
- compressors.
+ unlzma is a compression utility using the Lempel-Ziv-Markov chain
+ compression algorithm, and range coding. Compression
+ is generally considerably better than that achieved by the bzip2
+ compressors.
- The BusyBox unlzma applet is limited to decompression only.
- On an x86 system, this applet adds about 4K.
+ The BusyBox unlzma applet is limited to decompression only.
+ On an x86 system, this applet adds about 4K.
config BUSYBOX_CONFIG_LZCAT
bool "lzcat"
default BUSYBOX_DEFAULT_LZCAT
help
- unlzma is a compression utility using the Lempel-Ziv-Markov chain
- compression algorithm, and range coding. Compression
- is generally considerably better than that achieved by the bzip2
- compressors.
+ unlzma is a compression utility using the Lempel-Ziv-Markov chain
+ compression algorithm, and range coding. Compression
+ is generally considerably better than that achieved by the bzip2
+ compressors.
- The BusyBox unlzma applet is limited to decompression only.
- On an x86 system, this applet adds about 4K.
+ The BusyBox unlzma applet is limited to decompression only.
+ On an x86 system, this applet adds about 4K.
config BUSYBOX_CONFIG_LZMA
bool "lzma -d"
default BUSYBOX_DEFAULT_LZMA
help
- Enable this option if you want commands like "lzma -d" to work.
- IOW: you'll get lzma applet, but it will always require -d option.
+ Enable this option if you want commands like "lzma -d" to work.
+ IOW: you'll get lzma applet, but it will always require -d option.
config BUSYBOX_CONFIG_FEATURE_LZMA_FAST
bool "Optimize for speed"
default BUSYBOX_DEFAULT_FEATURE_LZMA_FAST
depends on BUSYBOX_CONFIG_UNLZMA || BUSYBOX_CONFIG_LZCAT || BUSYBOX_CONFIG_LZMA
help
- This option reduces decompression time by about 25% at the cost of
- a 1K bigger binary.
+ This option reduces decompression time by about 25% at the cost of
+ a 1K bigger binary.
config BUSYBOX_CONFIG_UNXZ
bool "unxz"
default BUSYBOX_DEFAULT_UNXZ
help
- unxz is a unlzma successor.
+ unxz is a unlzma successor.
config BUSYBOX_CONFIG_XZCAT
bool "xzcat"
default BUSYBOX_DEFAULT_XZCAT
help
- Alias to "unxz -c".
+ Alias to "unxz -c".
config BUSYBOX_CONFIG_XZ
bool "xz -d"
default BUSYBOX_DEFAULT_XZ
help
- Enable this option if you want commands like "xz -d" to work.
- IOW: you'll get xz applet, but it will always require -d option.
+ Enable this option if you want commands like "xz -d" to work.
+ IOW: you'll get xz applet, but it will always require -d option.
config BUSYBOX_CONFIG_BZIP2
bool "bzip2"
default BUSYBOX_DEFAULT_BZIP2
help
- bzip2 is a compression utility using the Burrows-Wheeler block
- sorting text compression algorithm, and Huffman coding. Compression
- is generally considerably better than that achieved by more
- conventional LZ77/LZ78-based compressors, and approaches the
- performance of the PPM family of statistical compressors.
+ bzip2 is a compression utility using the Burrows-Wheeler block
+ sorting text compression algorithm, and Huffman coding. Compression
+ is generally considerably better than that achieved by more
+ conventional LZ77/LZ78-based compressors, and approaches the
+ performance of the PPM family of statistical compressors.
- Unless you have a specific application which requires bzip2, you
- should probably say N here.
+ Unless you have a specific application which requires bzip2, you
+ should probably say N here.
config BUSYBOX_CONFIG_BZIP2_SMALL
int "Trade size for speed (0:fast 9:slow)"
range 0 9
depends on BUSYBOX_CONFIG_BZIP2
help
- 0 is faster but larger
- 9 is smaller but slower
+ 0 is faster but larger
+ 9 is smaller but slower
config BUSYBOX_CONFIG_FEATURE_BZIP2_DECOMPRESS
bool "Enable decompression"
default BUSYBOX_DEFAULT_FEATURE_BZIP2_DECOMPRESS
depends on BUSYBOX_CONFIG_BZIP2 || BUSYBOX_CONFIG_BUNZIP2 || BUSYBOX_CONFIG_BZCAT
help
- Enable -d (--decompress) and -t (--test) options for bzip2.
- This will be automatically selected if bunzip2 or bzcat is
- enabled.
+ Enable -d (--decompress) and -t (--test) options for bzip2.
+ This will be automatically selected if bunzip2 or bzcat is
+ enabled.
config BUSYBOX_CONFIG_CPIO
bool "cpio"
default BUSYBOX_DEFAULT_CPIO
help
- cpio is an archival utility program used to create, modify, and
- extract contents from archives.
- cpio has 110 bytes of overheads for every stored file.
+ cpio is an archival utility program used to create, modify, and
+ extract contents from archives.
+ cpio has 110 bytes of overheads for every stored file.
- This implementation of cpio can extract cpio archives created in the
- "newc" or "crc" format.
+ This implementation of cpio can extract cpio archives created in the
+ "newc" or "crc" format.
- Unless you have a specific application which requires cpio, you
- should probably say N here.
+ Unless you have a specific application which requires cpio, you
+ should probably say N here.
config BUSYBOX_CONFIG_FEATURE_CPIO_O
bool "Support archive creation"
default BUSYBOX_DEFAULT_FEATURE_CPIO_O
depends on BUSYBOX_CONFIG_CPIO
help
- This implementation of cpio can create cpio archives in the "newc"
- format only.
+ This implementation of cpio can create cpio archives in the "newc"
+ format only.
config BUSYBOX_CONFIG_FEATURE_CPIO_P
bool "Support passthrough mode"
default BUSYBOX_DEFAULT_FEATURE_CPIO_P
depends on BUSYBOX_CONFIG_FEATURE_CPIO_O
help
- Passthrough mode. Rarely used.
+ Passthrough mode. Rarely used.
config BUSYBOX_CONFIG_DPKG
bool "dpkg"
default BUSYBOX_DEFAULT_DPKG
select BUSYBOX_CONFIG_FEATURE_SEAMLESS_GZ
help
- dpkg is a medium-level tool to install, build, remove and manage
- Debian packages.
+ dpkg is a medium-level tool to install, build, remove and manage
+ Debian packages.
- This implementation of dpkg has a number of limitations,
- you should use the official dpkg if possible.
+ This implementation of dpkg has a number of limitations,
+ you should use the official dpkg if possible.
config BUSYBOX_CONFIG_DPKG_DEB
bool "dpkg_deb"
default BUSYBOX_DEFAULT_DPKG_DEB
select BUSYBOX_CONFIG_FEATURE_SEAMLESS_GZ
help
- dpkg-deb unpacks and provides information about Debian archives.
+ dpkg-deb unpacks and provides information about Debian archives.
- This implementation of dpkg-deb cannot pack archives.
+ This implementation of dpkg-deb cannot pack archives.
- Unless you have a specific application which requires dpkg-deb,
- say N here.
+ Unless you have a specific application which requires dpkg-deb,
+ say N here.
config BUSYBOX_CONFIG_GZIP
bool "gzip"
default BUSYBOX_DEFAULT_GZIP
help
- gzip is used to compress files.
- It's probably the most widely used UNIX compression program.
+ gzip is used to compress files.
+ It's probably the most widely used UNIX compression program.
config BUSYBOX_CONFIG_FEATURE_GZIP_LONG_OPTIONS
bool "Enable long options"
range 0 2
depends on BUSYBOX_CONFIG_GZIP
help
- Enable big memory options for gzip.
- 0: small buffers, small hash-tables
- 1: larger buffers, larger hash-tables
- 2: larger buffers, largest hash-tables
- Larger models may give slightly better compression
+ Enable big memory options for gzip.
+ 0: small buffers, small hash-tables
+ 1: larger buffers, larger hash-tables
+ 2: larger buffers, largest hash-tables
+ Larger models may give slightly better compression
config BUSYBOX_CONFIG_FEATURE_GZIP_LEVELS
bool "Enable compression levels"
default BUSYBOX_DEFAULT_FEATURE_GZIP_LEVELS
depends on BUSYBOX_CONFIG_GZIP
help
- Enable support for compression levels 4-9. The default level
- is 6. If levels 1-3 are specified, 4 is used.
- If this option is not selected, -N options are ignored and -9
- is used.
+ Enable support for compression levels 4-9. The default level
+ is 6. If levels 1-3 are specified, 4 is used.
+ If this option is not selected, -N options are ignored and -9
+ is used.
config BUSYBOX_CONFIG_FEATURE_GZIP_DECOMPRESS
bool "Enable decompression"
default BUSYBOX_DEFAULT_FEATURE_GZIP_DECOMPRESS
depends on BUSYBOX_CONFIG_GZIP || BUSYBOX_CONFIG_GUNZIP || BUSYBOX_CONFIG_ZCAT
help
- Enable -d (--decompress) and -t (--test) options for gzip.
- This will be automatically selected if gunzip or zcat is
- enabled.
+ Enable -d (--decompress) and -t (--test) options for gzip.
+ This will be automatically selected if gunzip or zcat is
+ enabled.
config BUSYBOX_CONFIG_LZOP
bool "lzop"
default BUSYBOX_DEFAULT_LZOP
help
- Lzop compression/decompresion.
+ Lzop compression/decompresion.
config BUSYBOX_CONFIG_UNLZOP
bool "unlzop"
default BUSYBOX_DEFAULT_UNLZOP # INCOMPAT: upstream lzop does not provide such tool
help
- Lzop decompresion.
+ Lzop decompresion.
config BUSYBOX_CONFIG_LZOPCAT
bool "lzopcat"
default BUSYBOX_DEFAULT_LZOPCAT # INCOMPAT: upstream lzop does not provide such tool
help
- Alias to "unlzop -c".
+ Alias to "unlzop -c".
config BUSYBOX_CONFIG_LZOP_COMPR_HIGH
bool "lzop compression levels 7,8,9 (not very useful)"
default BUSYBOX_DEFAULT_LZOP_COMPR_HIGH
depends on BUSYBOX_CONFIG_LZOP || BUSYBOX_CONFIG_UNLZOP || BUSYBOX_CONFIG_LZOPCAT
help
- High levels (7,8,9) of lzop compression. These levels
- are actually slower than gzip at equivalent compression ratios
- and take up 3.2K of code.
+ High levels (7,8,9) of lzop compression. These levels
+ are actually slower than gzip at equivalent compression ratios
+ and take up 3.2K of code.
config BUSYBOX_CONFIG_RPM
bool "rpm"
default BUSYBOX_DEFAULT_RPM
help
- Mini RPM applet - queries and extracts RPM packages.
+ Mini RPM applet - queries and extracts RPM packages.
config BUSYBOX_CONFIG_RPM2CPIO
bool "rpm2cpio"
default BUSYBOX_DEFAULT_RPM2CPIO
help
- Converts a RPM file into a CPIO archive.
+ Converts a RPM file into a CPIO archive.
config BUSYBOX_CONFIG_TAR
bool "tar"
default BUSYBOX_DEFAULT_TAR
help
- tar is an archiving program. It's commonly used with gzip to
- create compressed archives. It's probably the most widely used
- UNIX archive program.
+ tar is an archiving program. It's commonly used with gzip to
+ create compressed archives. It's probably the most widely used
+ UNIX archive program.
config BUSYBOX_CONFIG_FEATURE_TAR_LONG_OPTIONS
bool "Enable long options"
default BUSYBOX_DEFAULT_FEATURE_TAR_AUTODETECT
depends on BUSYBOX_CONFIG_TAR && (BUSYBOX_CONFIG_FEATURE_SEAMLESS_Z || BUSYBOX_CONFIG_FEATURE_SEAMLESS_GZ || BUSYBOX_CONFIG_FEATURE_SEAMLESS_BZ2 || BUSYBOX_CONFIG_FEATURE_SEAMLESS_LZMA || BUSYBOX_CONFIG_FEATURE_SEAMLESS_XZ)
help
- With this option tar can automatically detect compressed
- tarballs. Currently it works only on files (not pipes etc).
+ With this option tar can automatically detect compressed
+ tarballs. Currently it works only on files (not pipes etc).
config BUSYBOX_CONFIG_FEATURE_TAR_FROM
bool "Enable -X (exclude from) and -T (include from) options)"
default BUSYBOX_DEFAULT_FEATURE_TAR_FROM
depends on BUSYBOX_CONFIG_TAR
help
- If you enable this option you'll be able to specify
- a list of files to include or exclude from an archive.
+ If you enable this option you'll be able to specify
+ a list of files to include or exclude from an archive.
config BUSYBOX_CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY
bool "Support old tar header format"
default BUSYBOX_DEFAULT_FEATURE_TAR_OLDGNU_COMPATIBILITY
depends on BUSYBOX_CONFIG_TAR || BUSYBOX_CONFIG_DPKG
help
- This option is required to unpack archives created in
- the old GNU format; help to kill this old format by
- repacking your ancient archives with the new format.
+ This option is required to unpack archives created in
+ the old GNU format; help to kill this old format by
+ repacking your ancient archives with the new format.
config BUSYBOX_CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY
bool "Enable untarring of tarballs with checksums produced by buggy Sun tar"
default BUSYBOX_DEFAULT_FEATURE_TAR_OLDSUN_COMPATIBILITY
depends on BUSYBOX_CONFIG_TAR || BUSYBOX_CONFIG_DPKG
help
- This option is required to unpack archives created by some old
- version of Sun's tar (it was calculating checksum using signed
- arithmetic). It is said to be fixed in newer Sun tar, but "old"
- tarballs still exist.
+ This option is required to unpack archives created by some old
+ version of Sun's tar (it was calculating checksum using signed
+ arithmetic). It is said to be fixed in newer Sun tar, but "old"
+ tarballs still exist.
config BUSYBOX_CONFIG_FEATURE_TAR_GNU_EXTENSIONS
bool "Support GNU tar extensions (long filenames)"
default BUSYBOX_DEFAULT_FEATURE_TAR_TO_COMMAND
depends on BUSYBOX_CONFIG_TAR && BUSYBOX_CONFIG_FEATURE_TAR_LONG_OPTIONS
help
- If you enable this option you'll be able to instruct tar to send
- the contents of each extracted file to the standard input of an
- external program.
+ If you enable this option you'll be able to instruct tar to send
+ the contents of each extracted file to the standard input of an
+ external program.
config BUSYBOX_CONFIG_FEATURE_TAR_UNAME_GNAME
bool "Enable use of user and group names"
default BUSYBOX_DEFAULT_FEATURE_TAR_UNAME_GNAME
depends on BUSYBOX_CONFIG_TAR
help
- Enable use of user and group names in tar. This affects contents
- listings (-t) and preserving permissions when unpacking (-p).
- +200 bytes.
+ Enable use of user and group names in tar. This affects contents
+ listings (-t) and preserving permissions when unpacking (-p).
+ +200 bytes.
config BUSYBOX_CONFIG_FEATURE_TAR_NOPRESERVE_TIME
bool "Enable -m (do not preserve time) GNU option"
default BUSYBOX_DEFAULT_FEATURE_TAR_SELINUX
depends on BUSYBOX_CONFIG_TAR && BUSYBOX_CONFIG_SELINUX
help
- With this option busybox supports restoring SELinux labels
- when extracting files from tar archives.
+ With this option busybox supports restoring SELinux labels
+ when extracting files from tar archives.
config BUSYBOX_CONFIG_UNZIP
bool "unzip"
default BUSYBOX_DEFAULT_UNZIP
help
- unzip will list or extract files from a ZIP archive,
- commonly found on DOS/WIN systems. The default behavior
- (with no options) is to extract the archive into the
- current directory.
+ unzip will list or extract files from a ZIP archive,
+ commonly found on DOS/WIN systems. The default behavior
+ (with no options) is to extract the archive into the
+ current directory.
config BUSYBOX_CONFIG_FEATURE_UNZIP_CDF
bool "Read and use Central Directory data"
default BUSYBOX_DEFAULT_FEATURE_UNZIP_CDF
depends on BUSYBOX_CONFIG_UNZIP
help
- If you know that you only need to deal with simple
- ZIP files without deleted/updated files, SFX archives etc,
- you can reduce code size by unselecting this option.
- To support less trivial ZIPs, say Y.
+ If you know that you only need to deal with simple
+ ZIP files without deleted/updated files, SFX archives etc,
+ you can reduce code size by unselecting this option.
+ To support less trivial ZIPs, say Y.
config BUSYBOX_CONFIG_FEATURE_UNZIP_BZIP2
bool "Support compression method 12 (bzip2)"
default BUSYBOX_DEFAULT_CHVT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- This program is used to change to another terminal.
- Example: chvt 4 (change to terminal /dev/tty4)
+ This program is used to change to another terminal.
+ Example: chvt 4 (change to terminal /dev/tty4)
config BUSYBOX_CONFIG_CLEAR
bool "clear"
default BUSYBOX_DEFAULT_CLEAR
help
- This program clears the terminal screen.
+ This program clears the terminal screen.
config BUSYBOX_CONFIG_DEALLOCVT
bool "deallocvt"
default BUSYBOX_DEFAULT_DEALLOCVT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- This program deallocates unused virtual consoles.
+ This program deallocates unused virtual consoles.
config BUSYBOX_CONFIG_DUMPKMAP
bool "dumpkmap"
default BUSYBOX_DEFAULT_DUMPKMAP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- This program dumps the kernel's keyboard translation table to
- stdout, in binary format. You can then use loadkmap to load it.
+ This program dumps the kernel's keyboard translation table to
+ stdout, in binary format. You can then use loadkmap to load it.
config BUSYBOX_CONFIG_FGCONSOLE
bool "fgconsole"
default BUSYBOX_DEFAULT_FGCONSOLE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- This program prints active (foreground) console number.
+ This program prints active (foreground) console number.
config BUSYBOX_CONFIG_KBD_MODE
bool "kbd_mode"
default BUSYBOX_DEFAULT_KBD_MODE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- This program reports and sets keyboard mode.
+ This program reports and sets keyboard mode.
config BUSYBOX_CONFIG_LOADFONT
bool "loadfont"
default BUSYBOX_DEFAULT_LOADFONT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- This program loads a console font from standard input.
+ This program loads a console font from standard input.
config BUSYBOX_CONFIG_SETFONT
bool "setfont"
default BUSYBOX_DEFAULT_SETFONT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Allows to load console screen map. Useful for i18n.
+ Allows to load console screen map. Useful for i18n.
config BUSYBOX_CONFIG_FEATURE_SETFONT_TEXTUAL_MAP
bool "Support reading textual screen maps"
default BUSYBOX_DEFAULT_FEATURE_SETFONT_TEXTUAL_MAP
depends on BUSYBOX_CONFIG_SETFONT
help
- Support reading textual screen maps.
+ Support reading textual screen maps.
config BUSYBOX_CONFIG_DEFAULT_SETFONT_DIR
string "Default directory for console-tools files"
default BUSYBOX_DEFAULT_DEFAULT_SETFONT_DIR
depends on BUSYBOX_CONFIG_SETFONT
help
- Directory to use if setfont's params are simple filenames
- (not /path/to/file or ./file). Default is "" (no default directory).
+ Directory to use if setfont's params are simple filenames
+ (not /path/to/file or ./file). Default is "" (no default directory).
comment "Common options for loadfont and setfont"
depends on BUSYBOX_CONFIG_LOADFONT || BUSYBOX_CONFIG_SETFONT
default BUSYBOX_DEFAULT_LOADKMAP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- This program loads a keyboard translation table from
- standard input.
+ This program loads a keyboard translation table from
+ standard input.
config BUSYBOX_CONFIG_OPENVT
bool "openvt"
default BUSYBOX_DEFAULT_OPENVT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- This program is used to start a command on an unused
- virtual terminal.
+ This program is used to start a command on an unused
+ virtual terminal.
config BUSYBOX_CONFIG_RESET
bool "reset"
default BUSYBOX_DEFAULT_RESET
help
- This program is used to reset the terminal screen, if it
- gets messed up.
+ This program is used to reset the terminal screen, if it
+ gets messed up.
config BUSYBOX_CONFIG_RESIZE
bool "resize"
default BUSYBOX_DEFAULT_RESIZE
help
- This program is used to (re)set the width and height of your current
- terminal.
+ This program is used to (re)set the width and height of your current
+ terminal.
config BUSYBOX_CONFIG_FEATURE_RESIZE_PRINT
bool "Print environment variables"
default BUSYBOX_DEFAULT_FEATURE_RESIZE_PRINT
depends on BUSYBOX_CONFIG_RESIZE
help
- Prints the newly set size (number of columns and rows) of
- the terminal.
- E.g.:
- COLUMNS=80;LINES=44;export COLUMNS LINES;
+ Prints the newly set size (number of columns and rows) of
+ the terminal.
+ E.g.:
+ COLUMNS=80;LINES=44;export COLUMNS LINES;
config BUSYBOX_CONFIG_SETCONSOLE
bool "setconsole"
default BUSYBOX_DEFAULT_SETCONSOLE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- This program redirects the system console to another device,
- like the current tty while logged in via telnet.
+ This program redirects the system console to another device,
+ like the current tty while logged in via telnet.
config BUSYBOX_CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS
bool "Enable long options"
default BUSYBOX_DEFAULT_SETKEYCODES
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- This program loads entries into the kernel's scancode-to-keycode
- map, allowing unusual keyboards to generate usable keycodes.
+ This program loads entries into the kernel's scancode-to-keycode
+ map, allowing unusual keyboards to generate usable keycodes.
config BUSYBOX_CONFIG_SETLOGCONS
bool "setlogcons"
default BUSYBOX_DEFAULT_SETLOGCONS
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- This program redirects the output console of kernel messages.
+ This program redirects the output console of kernel messages.
config BUSYBOX_CONFIG_SHOWKEY
bool "showkey"
default BUSYBOX_DEFAULT_SHOWKEY
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Shows keys pressed.
+ Shows keys pressed.
endmenu
bool "basename"
default BUSYBOX_DEFAULT_BASENAME
help
- basename is used to strip the directory and suffix from filenames,
- leaving just the filename itself. Enable this option if you wish
- to enable the 'basename' utility.
+ basename is used to strip the directory and suffix from filenames,
+ leaving just the filename itself. Enable this option if you wish
+ to enable the 'basename' utility.
config BUSYBOX_CONFIG_CAT
bool "cat"
default BUSYBOX_DEFAULT_CAT
help
- cat is used to concatenate files and print them to the standard
- output. Enable this option if you wish to enable the 'cat' utility.
+ cat is used to concatenate files and print them to the standard
+ output. Enable this option if you wish to enable the 'cat' utility.
config BUSYBOX_CONFIG_FEATURE_CATV
bool "cat -v[etA]"
default BUSYBOX_DEFAULT_FEATURE_CATV
depends on BUSYBOX_CONFIG_CAT
help
- Display nonprinting characters as escape sequences
+ Display nonprinting characters as escape sequences
config BUSYBOX_CONFIG_CHGRP
bool "chgrp"
default BUSYBOX_DEFAULT_CHGRP
help
- chgrp is used to change the group ownership of files.
+ chgrp is used to change the group ownership of files.
config BUSYBOX_CONFIG_CHMOD
bool "chmod"
default BUSYBOX_DEFAULT_CHMOD
help
- chmod is used to change the access permission of files.
+ chmod is used to change the access permission of files.
config BUSYBOX_CONFIG_CHOWN
bool "chown"
default BUSYBOX_DEFAULT_CHOWN
help
- chown is used to change the user and/or group ownership
- of files.
+ chown is used to change the user and/or group ownership
+ of files.
config BUSYBOX_CONFIG_FEATURE_CHOWN_LONG_OPTIONS
bool "Enable long options"
bool "chroot"
default BUSYBOX_DEFAULT_CHROOT
help
- chroot is used to change the root directory and run a command.
- The default command is `/bin/sh'.
+ chroot is used to change the root directory and run a command.
+ The default command is `/bin/sh'.
config BUSYBOX_CONFIG_CKSUM
bool "cksum"
default BUSYBOX_DEFAULT_CKSUM
help
- cksum is used to calculate the CRC32 checksum of a file.
+ cksum is used to calculate the CRC32 checksum of a file.
config BUSYBOX_CONFIG_COMM
bool "comm"
default BUSYBOX_DEFAULT_COMM
help
- comm is used to compare two files line by line and return
- a three-column output.
+ comm is used to compare two files line by line and return
+ a three-column output.
config BUSYBOX_CONFIG_CP
bool "cp"
default BUSYBOX_DEFAULT_CP
help
- cp is used to copy files and directories.
+ cp is used to copy files and directories.
config BUSYBOX_CONFIG_FEATURE_CP_LONG_OPTIONS
bool "Enable long options"
default BUSYBOX_DEFAULT_FEATURE_CP_LONG_OPTIONS
depends on BUSYBOX_CONFIG_CP && BUSYBOX_CONFIG_LONG_OPTS
help
- Enable long options.
- Also add support for --parents option.
+ Enable long options.
+ Also add support for --parents option.
config BUSYBOX_CONFIG_CUT
bool "cut"
default BUSYBOX_DEFAULT_CUT
help
- cut is used to print selected parts of lines from
- each file to stdout.
+ cut is used to print selected parts of lines from
+ each file to stdout.
config BUSYBOX_CONFIG_DATE
bool "date"
default BUSYBOX_DEFAULT_DATE
help
- date is used to set the system date or display the
- current time in the given format.
+ date is used to set the system date or display the
+ current time in the given format.
config BUSYBOX_CONFIG_FEATURE_DATE_ISOFMT
bool "Enable ISO date format output (-I)"
default BUSYBOX_DEFAULT_FEATURE_DATE_ISOFMT
depends on BUSYBOX_CONFIG_DATE
help
- Enable option (-I) to output an ISO-8601 compliant
- date/time string.
+ Enable option (-I) to output an ISO-8601 compliant
+ date/time string.
# defaults to "no": stat's nanosecond field is a bit non-portable
config BUSYBOX_CONFIG_FEATURE_DATE_NANO
depends on BUSYBOX_CONFIG_DATE # syscall(__NR_clock_gettime)
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Support %[num]N format specifier. Adds ~250 bytes of code.
+ Support %[num]N format specifier. Adds ~250 bytes of code.
config BUSYBOX_CONFIG_FEATURE_DATE_COMPAT
bool "Support weird 'date MMDDhhmm[[YY]YY][.ss]' format"
default BUSYBOX_DEFAULT_FEATURE_DATE_COMPAT
depends on BUSYBOX_CONFIG_DATE
help
- System time can be set by 'date -s DATE' and simply 'date DATE',
- but formats of DATE string are different. 'date DATE' accepts
- a rather weird MMDDhhmm[[YY]YY][.ss] format with completely
- unnatural placement of year between minutes and seconds.
- date -s (and other commands like touch -d) use more sensible
- formats (for one, ISO format YYYY-MM-DD hh:mm:ss.ssssss).
+ System time can be set by 'date -s DATE' and simply 'date DATE',
+ but formats of DATE string are different. 'date DATE' accepts
+ a rather weird MMDDhhmm[[YY]YY][.ss] format with completely
+ unnatural placement of year between minutes and seconds.
+ date -s (and other commands like touch -d) use more sensible
+ formats (for one, ISO format YYYY-MM-DD hh:mm:ss.ssssss).
- With this option off, 'date DATE' is 'date -s DATE' support
- the same format. With it on, 'date DATE' additionally supports
- MMDDhhmm[[YY]YY][.ss] format.
+ With this option off, 'date DATE' is 'date -s DATE' support
+ the same format. With it on, 'date DATE' additionally supports
+ MMDDhhmm[[YY]YY][.ss] format.
config BUSYBOX_CONFIG_DD
bool "dd"
default BUSYBOX_DEFAULT_DD
help
- dd copies a file (from standard input to standard output,
- by default) using specific input and output blocksizes,
- while optionally performing conversions on it.
+ dd copies a file (from standard input to standard output,
+ by default) using specific input and output blocksizes,
+ while optionally performing conversions on it.
config BUSYBOX_CONFIG_FEATURE_DD_SIGNAL_HANDLING
bool "Enable signal handling for status reporting"
default BUSYBOX_DEFAULT_FEATURE_DD_SIGNAL_HANDLING
depends on BUSYBOX_CONFIG_DD
help
- Sending a SIGUSR1 signal to a running `dd' process makes it
- print to standard error the number of records read and written
- so far, then to resume copying.
+ Sending a SIGUSR1 signal to a running `dd' process makes it
+ print to standard error the number of records read and written
+ so far, then to resume copying.
- $ dd if=/dev/zero of=/dev/null &
- $ pid=$!; kill -USR1 $pid; sleep 1; kill $pid
- 10899206+0 records in
- 10899206+0 records out
+ $ dd if=/dev/zero of=/dev/null &
+ $ pid=$!; kill -USR1 $pid; sleep 1; kill $pid
+ 10899206+0 records in
+ 10899206+0 records out
config BUSYBOX_CONFIG_FEATURE_DD_THIRD_STATUS_LINE
bool "Enable the third status line upon signal"
default BUSYBOX_DEFAULT_FEATURE_DD_THIRD_STATUS_LINE
depends on BUSYBOX_CONFIG_DD && BUSYBOX_CONFIG_FEATURE_DD_SIGNAL_HANDLING
help
- Displays a coreutils-like third status line with transferred bytes,
- elapsed time and speed.
+ Displays a coreutils-like third status line with transferred bytes,
+ elapsed time and speed.
config BUSYBOX_CONFIG_FEATURE_DD_IBS_OBS
bool "Enable ibs, obs and conv options"
default BUSYBOX_DEFAULT_FEATURE_DD_IBS_OBS
depends on BUSYBOX_CONFIG_DD
help
- Enable support for writing a certain number of bytes in and out,
- at a time, and performing conversions on the data stream.
+ Enable support for writing a certain number of bytes in and out,
+ at a time, and performing conversions on the data stream.
config BUSYBOX_CONFIG_FEATURE_DD_STATUS
bool "Enable status display options"
default BUSYBOX_DEFAULT_FEATURE_DD_STATUS
depends on BUSYBOX_CONFIG_DD
help
- Enable support for status=noxfer/none option.
+ Enable support for status=noxfer/none option.
config BUSYBOX_CONFIG_DF
bool "df"
default BUSYBOX_DEFAULT_DF
help
- df reports the amount of disk space used and available
- on filesystems.
+ df reports the amount of disk space used and available
+ on filesystems.
config BUSYBOX_CONFIG_FEATURE_DF_FANCY
bool "Enable -a, -i, -B"
default BUSYBOX_DEFAULT_FEATURE_DF_FANCY
depends on BUSYBOX_CONFIG_DF
help
- -a Show all filesystems
- -i Inodes
- -B <SIZE> Blocksize
+ -a Show all filesystems
+ -i Inodes
+ -B <SIZE> Blocksize
config BUSYBOX_CONFIG_DIRNAME
bool "dirname"
default BUSYBOX_DEFAULT_DIRNAME
help
- dirname is used to strip a non-directory suffix from
- a file name.
+ dirname is used to strip a non-directory suffix from
+ a file name.
config BUSYBOX_CONFIG_DOS2UNIX
bool "dos2unix"
default BUSYBOX_DEFAULT_DOS2UNIX
help
- dos2unix is used to convert a text file from DOS format to
- UNIX format, and vice versa.
+ dos2unix is used to convert a text file from DOS format to
+ UNIX format, and vice versa.
config BUSYBOX_CONFIG_UNIX2DOS
bool "unix2dos"
default BUSYBOX_DEFAULT_UNIX2DOS
help
- unix2dos is used to convert a text file from UNIX format to
- DOS format, and vice versa.
+ unix2dos is used to convert a text file from UNIX format to
+ DOS format, and vice versa.
config BUSYBOX_CONFIG_DU
bool "du (default blocksize of 512 bytes)"
default BUSYBOX_DEFAULT_DU
help
- du is used to report the amount of disk space used
- for specified files.
+ du is used to report the amount of disk space used
+ for specified files.
config BUSYBOX_CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K
bool "Use a default blocksize of 1024 bytes (1K)"
default BUSYBOX_DEFAULT_FEATURE_DU_DEFAULT_BLOCKSIZE_1K
depends on BUSYBOX_CONFIG_DU
help
- Use a blocksize of (1K) instead of the default 512b.
+ Use a blocksize of (1K) instead of the default 512b.
config BUSYBOX_CONFIG_ECHO
bool "echo (basic SuSv3 version taking no options)"
default BUSYBOX_DEFAULT_ECHO
help
- echo is used to print a specified string to stdout.
+ echo is used to print a specified string to stdout.
# this entry also appears in shell/Config.in, next to the echo builtin
config BUSYBOX_CONFIG_FEATURE_FANCY_ECHO
bool "env"
default BUSYBOX_DEFAULT_ENV
help
- env is used to set an environment variable and run
- a command; without options it displays the current
- environment.
+ env is used to set an environment variable and run
+ a command; without options it displays the current
+ environment.
config BUSYBOX_CONFIG_FEATURE_ENV_LONG_OPTIONS
bool "Enable long options"
bool "expand"
default BUSYBOX_DEFAULT_EXPAND
help
- By default, convert all tabs to spaces.
+ By default, convert all tabs to spaces.
config BUSYBOX_CONFIG_FEATURE_EXPAND_LONG_OPTIONS
bool "Enable long options"
bool "unexpand"
default BUSYBOX_DEFAULT_UNEXPAND
help
- By default, convert only leading sequences of blanks to tabs.
+ By default, convert only leading sequences of blanks to tabs.
config BUSYBOX_CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS
bool "Enable long options"
bool "expr"
default BUSYBOX_DEFAULT_EXPR
help
- expr is used to calculate numbers and print the result
- to standard output.
+ expr is used to calculate numbers and print the result
+ to standard output.
config BUSYBOX_CONFIG_EXPR_MATH_SUPPORT_64
bool "Extend Posix numbers support to 64 bit"
default BUSYBOX_DEFAULT_EXPR_MATH_SUPPORT_64
depends on BUSYBOX_CONFIG_EXPR
help
- Enable 64-bit math support in the expr applet. This will make
- the applet slightly larger, but will allow computation with very
- large numbers.
+ Enable 64-bit math support in the expr applet. This will make
+ the applet slightly larger, but will allow computation with very
+ large numbers.
config BUSYBOX_CONFIG_FACTOR
bool "factor"
default BUSYBOX_DEFAULT_FACTOR
help
- factor factorizes integers
+ factor factorizes integers
config BUSYBOX_CONFIG_FALSE
bool "false"
default BUSYBOX_DEFAULT_FALSE
help
- false returns an exit code of FALSE (1).
+ false returns an exit code of FALSE (1).
config BUSYBOX_CONFIG_FOLD
bool "fold"
default BUSYBOX_DEFAULT_FOLD
help
- Wrap text to fit a specific width.
+ Wrap text to fit a specific width.
config BUSYBOX_CONFIG_FSYNC
bool "fsync"
default BUSYBOX_DEFAULT_FSYNC
help
- fsync is used to flush file-related cached blocks to disk.
+ fsync is used to flush file-related cached blocks to disk.
config BUSYBOX_CONFIG_HEAD
bool "head"
default BUSYBOX_DEFAULT_HEAD
help
- head is used to print the first specified number of lines
- from files.
+ head is used to print the first specified number of lines
+ from files.
config BUSYBOX_CONFIG_FEATURE_FANCY_HEAD
bool "Enable -c, -q, and -v"
bool "hostid"
default BUSYBOX_DEFAULT_HOSTID
help
- hostid prints the numeric identifier (in hexadecimal) for
- the current host.
+ hostid prints the numeric identifier (in hexadecimal) for
+ the current host.
config BUSYBOX_CONFIG_ID
bool "id"
default BUSYBOX_DEFAULT_ID
help
- id displays the current user and group ID names.
+ id displays the current user and group ID names.
config BUSYBOX_CONFIG_GROUPS
bool "groups"
default BUSYBOX_DEFAULT_GROUPS
help
- Print the group names associated with current user id.
+ Print the group names associated with current user id.
config BUSYBOX_CONFIG_INSTALL
bool "install"
default BUSYBOX_DEFAULT_INSTALL
help
- Copy files and set attributes.
+ Copy files and set attributes.
config BUSYBOX_CONFIG_FEATURE_INSTALL_LONG_OPTIONS
bool "Enable long options"
bool "link"
default BUSYBOX_DEFAULT_LINK
help
- link creates hard links between files.
+ link creates hard links between files.
config BUSYBOX_CONFIG_LN
bool "ln"
default BUSYBOX_DEFAULT_LN
help
- ln is used to create hard or soft links between files.
+ ln is used to create hard or soft links between files.
config BUSYBOX_CONFIG_LOGNAME
bool "logname"
default BUSYBOX_DEFAULT_LOGNAME
help
- logname is used to print the current user's login name.
+ logname is used to print the current user's login name.
config BUSYBOX_CONFIG_LS
bool "ls"
default BUSYBOX_DEFAULT_LS
help
- ls is used to list the contents of directories.
+ ls is used to list the contents of directories.
config BUSYBOX_CONFIG_FEATURE_LS_FILETYPES
bool "Enable filetyping options (-p and -F)"
default BUSYBOX_DEFAULT_FEATURE_LS_SORTFILES
depends on BUSYBOX_CONFIG_LS
help
- Allow ls to sort file names alphabetically.
+ Allow ls to sort file names alphabetically.
config BUSYBOX_CONFIG_FEATURE_LS_TIMESTAMPS
bool "Show file timestamps"
default BUSYBOX_DEFAULT_FEATURE_LS_TIMESTAMPS
depends on BUSYBOX_CONFIG_LS
help
- Allow ls to display timestamps for files.
+ Allow ls to display timestamps for files.
config BUSYBOX_CONFIG_FEATURE_LS_USERNAME
bool "Show username/groupnames"
default BUSYBOX_DEFAULT_FEATURE_LS_USERNAME
depends on BUSYBOX_CONFIG_LS
help
- Allow ls to display username/groupname for files.
+ Allow ls to display username/groupname for files.
config BUSYBOX_CONFIG_FEATURE_LS_COLOR
bool "Allow use of color to identify file types"
default BUSYBOX_DEFAULT_FEATURE_LS_COLOR
depends on BUSYBOX_CONFIG_LS && BUSYBOX_CONFIG_LONG_OPTS
help
- This enables the --color option to ls.
+ This enables the --color option to ls.
config BUSYBOX_CONFIG_FEATURE_LS_COLOR_IS_DEFAULT
bool "Produce colored ls output by default"
default BUSYBOX_DEFAULT_FEATURE_LS_COLOR_IS_DEFAULT
depends on BUSYBOX_CONFIG_FEATURE_LS_COLOR
help
- Saying yes here will turn coloring on by default,
- even if no "--color" option is given to the ls command.
- This is not recommended, since the colors are not
- configurable, and the output may not be legible on
- many output screens.
+ Saying yes here will turn coloring on by default,
+ even if no "--color" option is given to the ls command.
+ This is not recommended, since the colors are not
+ configurable, and the output may not be legible on
+ many output screens.
config BUSYBOX_CONFIG_MD5SUM
bool "md5sum"
default BUSYBOX_DEFAULT_MD5SUM
help
- md5sum is used to print or check MD5 checksums.
+ md5sum is used to print or check MD5 checksums.
config BUSYBOX_CONFIG_SHA1SUM
bool "sha1sum"
default BUSYBOX_DEFAULT_SHA1SUM
help
- Compute and check SHA1 message digest
+ Compute and check SHA1 message digest
config BUSYBOX_CONFIG_SHA256SUM
bool "sha256sum"
default BUSYBOX_DEFAULT_SHA256SUM
help
- Compute and check SHA256 message digest
+ Compute and check SHA256 message digest
config BUSYBOX_CONFIG_SHA512SUM
bool "sha512sum"
default BUSYBOX_DEFAULT_SHA512SUM
help
- Compute and check SHA512 message digest
+ Compute and check SHA512 message digest
config BUSYBOX_CONFIG_SHA3SUM
bool "sha3sum"
default BUSYBOX_DEFAULT_SHA3SUM
help
- Compute and check SHA3 message digest
+ Compute and check SHA3 message digest
comment "Common options for md5sum, sha1sum, sha256sum, sha512sum, sha3sum"
depends on BUSYBOX_CONFIG_MD5SUM || BUSYBOX_CONFIG_SHA1SUM || BUSYBOX_CONFIG_SHA256SUM || BUSYBOX_CONFIG_SHA512SUM || BUSYBOX_CONFIG_SHA3SUM
default BUSYBOX_DEFAULT_FEATURE_MD5_SHA1_SUM_CHECK
depends on BUSYBOX_CONFIG_MD5SUM || BUSYBOX_CONFIG_SHA1SUM || BUSYBOX_CONFIG_SHA256SUM || BUSYBOX_CONFIG_SHA512SUM || BUSYBOX_CONFIG_SHA3SUM
help
- Enabling the -c options allows files to be checked
- against pre-calculated hash values.
- -s and -w are useful options when verifying checksums.
+ Enabling the -c options allows files to be checked
+ against pre-calculated hash values.
+ -s and -w are useful options when verifying checksums.
config BUSYBOX_CONFIG_MKDIR
bool "mkdir"
default BUSYBOX_DEFAULT_MKDIR
help
- mkdir is used to create directories with the specified names.
+ mkdir is used to create directories with the specified names.
config BUSYBOX_CONFIG_FEATURE_MKDIR_LONG_OPTIONS
bool "Enable long options"
bool "mkfifo"
default BUSYBOX_DEFAULT_MKFIFO
help
- mkfifo is used to create FIFOs (named pipes).
- The 'mknod' program can also create FIFOs.
+ mkfifo is used to create FIFOs (named pipes).
+ The 'mknod' program can also create FIFOs.
config BUSYBOX_CONFIG_MKNOD
bool "mknod"
default BUSYBOX_DEFAULT_MKNOD
help
- mknod is used to create FIFOs or block/character special
- files with the specified names.
+ mknod is used to create FIFOs or block/character special
+ files with the specified names.
config BUSYBOX_CONFIG_MKTEMP
bool "mktemp"
default BUSYBOX_DEFAULT_MKTEMP
help
- mktemp is used to create unique temporary files
+ mktemp is used to create unique temporary files
config BUSYBOX_CONFIG_MV
bool "mv"
default BUSYBOX_DEFAULT_MV
help
- mv is used to move or rename files or directories.
+ mv is used to move or rename files or directories.
config BUSYBOX_CONFIG_FEATURE_MV_LONG_OPTIONS
bool "Enable long options"
bool "nice"
default BUSYBOX_DEFAULT_NICE
help
- nice runs a program with modified scheduling priority.
+ nice runs a program with modified scheduling priority.
config BUSYBOX_CONFIG_NL
bool "nl"
default BUSYBOX_DEFAULT_NL
help
- nl is used to number lines of files.
+ nl is used to number lines of files.
config BUSYBOX_CONFIG_NOHUP
bool "nohup"
default BUSYBOX_DEFAULT_NOHUP
help
- run a command immune to hangups, with output to a non-tty.
+ run a command immune to hangups, with output to a non-tty.
config BUSYBOX_CONFIG_NPROC
bool "nproc"
default BUSYBOX_DEFAULT_NPROC
help
- Print number of CPUs
+ Print number of CPUs
config BUSYBOX_CONFIG_OD
bool "od"
default BUSYBOX_DEFAULT_OD
help
- od is used to dump binary files in octal and other formats.
+ od is used to dump binary files in octal and other formats.
config BUSYBOX_CONFIG_PASTE
bool "paste"
default BUSYBOX_DEFAULT_PASTE
help
- paste is used to paste lines of different files together
- and write the result to stdout
+ paste is used to paste lines of different files together
+ and write the result to stdout
config BUSYBOX_CONFIG_PRINTENV
bool "printenv"
default BUSYBOX_DEFAULT_PRINTENV
help
- printenv is used to print all or part of environment.
+ printenv is used to print all or part of environment.
config BUSYBOX_CONFIG_PRINTF
bool "printf"
default BUSYBOX_DEFAULT_PRINTF
help
- printf is used to format and print specified strings.
- It's similar to `echo' except it has more options.
+ printf is used to format and print specified strings.
+ It's similar to `echo' except it has more options.
config BUSYBOX_CONFIG_PWD
bool "pwd"
default BUSYBOX_DEFAULT_PWD
help
- pwd is used to print the current directory.
+ pwd is used to print the current directory.
config BUSYBOX_CONFIG_READLINK
bool "readlink"
default BUSYBOX_DEFAULT_READLINK
help
- This program reads a symbolic link and returns the name
- of the file it points to
+ This program reads a symbolic link and returns the name
+ of the file it points to
config BUSYBOX_CONFIG_FEATURE_READLINK_FOLLOW
bool "Enable canonicalization by following all symlinks (-f)"
default BUSYBOX_DEFAULT_FEATURE_READLINK_FOLLOW
depends on BUSYBOX_CONFIG_READLINK
help
- Enable the readlink option (-f).
+ Enable the readlink option (-f).
config BUSYBOX_CONFIG_REALPATH
bool "realpath"
default BUSYBOX_DEFAULT_REALPATH
help
- Return the canonicalized absolute pathname.
- This isn't provided by GNU shellutils, but where else does it belong.
+ Return the canonicalized absolute pathname.
+ This isn't provided by GNU shellutils, but where else does it belong.
config BUSYBOX_CONFIG_RM
bool "rm"
default BUSYBOX_DEFAULT_RM
help
- rm is used to remove files or directories.
+ rm is used to remove files or directories.
config BUSYBOX_CONFIG_RMDIR
bool "rmdir"
default BUSYBOX_DEFAULT_RMDIR
help
- rmdir is used to remove empty directories.
+ rmdir is used to remove empty directories.
config BUSYBOX_CONFIG_FEATURE_RMDIR_LONG_OPTIONS
bool "Enable long options"
default BUSYBOX_DEFAULT_FEATURE_RMDIR_LONG_OPTIONS
depends on BUSYBOX_CONFIG_RMDIR && BUSYBOX_CONFIG_LONG_OPTS
help
- Support long options for the rmdir applet, including
- --ignore-fail-on-non-empty for compatibility with GNU rmdir.
+ Support long options for the rmdir applet, including
+ --ignore-fail-on-non-empty for compatibility with GNU rmdir.
config BUSYBOX_CONFIG_SEQ
bool "seq"
default BUSYBOX_DEFAULT_SEQ
help
- print a sequence of numbers
+ print a sequence of numbers
config BUSYBOX_CONFIG_SHRED
bool "shred"
default BUSYBOX_DEFAULT_SHRED
help
- Overwrite a file to hide its contents, and optionally delete it
+ Overwrite a file to hide its contents, and optionally delete it
config BUSYBOX_CONFIG_SHUF
bool "shuf"
default BUSYBOX_DEFAULT_SHUF
help
- Generate random permutations
+ Generate random permutations
config BUSYBOX_CONFIG_SLEEP
bool "sleep"
default BUSYBOX_DEFAULT_SLEEP
help
- sleep is used to pause for a specified number of seconds.
- It comes in 3 versions:
- - small: takes one integer parameter
- - fancy: takes multiple integer arguments with suffixes:
+ sleep is used to pause for a specified number of seconds.
+ It comes in 3 versions:
+ - small: takes one integer parameter
+ - fancy: takes multiple integer arguments with suffixes:
sleep 1d 2h 3m 15s
- - fancy with fractional numbers:
+ - fancy with fractional numbers:
sleep 2.3s 4.5h sleeps for 16202.3 seconds
- Last one is "the most compatible" with coreutils sleep,
- but it adds around 1k of code.
+ Last one is "the most compatible" with coreutils sleep,
+ but it adds around 1k of code.
config BUSYBOX_CONFIG_FEATURE_FANCY_SLEEP
bool "Enable multiple arguments and s/m/h/d suffixes"
default BUSYBOX_DEFAULT_FEATURE_FANCY_SLEEP
depends on BUSYBOX_CONFIG_SLEEP
help
- Allow sleep to pause for specified minutes, hours, and days.
+ Allow sleep to pause for specified minutes, hours, and days.
config BUSYBOX_CONFIG_FEATURE_FLOAT_SLEEP
bool "Enable fractional arguments"
default BUSYBOX_DEFAULT_FEATURE_FLOAT_SLEEP
depends on BUSYBOX_CONFIG_FEATURE_FANCY_SLEEP
help
- Allow for fractional numeric parameters.
+ Allow for fractional numeric parameters.
config BUSYBOX_CONFIG_SORT
bool "sort"
default BUSYBOX_DEFAULT_SORT
help
- sort is used to sort lines of text in specified files.
+ sort is used to sort lines of text in specified files.
config BUSYBOX_CONFIG_FEATURE_SORT_BIG
bool "Full SuSv3 compliant sort (support -ktcsbdfiozgM)"
default BUSYBOX_DEFAULT_FEATURE_SORT_BIG
depends on BUSYBOX_CONFIG_SORT
help
- Without this, sort only supports -r, -u, and an integer version
- of -n. Selecting this adds sort keys, floating point support, and
- more. This adds a little over 3k to a nonstatic build on x86.
+ Without this, sort only supports -r, -u, and an integer version
+ of -n. Selecting this adds sort keys, floating point support, and
+ more. This adds a little over 3k to a nonstatic build on x86.
- The SuSv3 sort standard is available at:
- http://www.opengroup.org/onlinepubs/007904975/utilities/sort.html
+ The SuSv3 sort standard is available at:
+ http://www.opengroup.org/onlinepubs/007904975/utilities/sort.html
config BUSYBOX_CONFIG_SPLIT
bool "split"
default BUSYBOX_DEFAULT_SPLIT
help
- Split a file into pieces.
+ Split a file into pieces.
config BUSYBOX_CONFIG_FEATURE_SPLIT_FANCY
bool "Fancy extensions"
default BUSYBOX_DEFAULT_FEATURE_SPLIT_FANCY
depends on BUSYBOX_CONFIG_SPLIT
help
- Add support for features not required by SUSv3.
- Supports additional suffixes 'b' for 512 bytes,
- 'g' for 1GiB for the -b option.
+ Add support for features not required by SUSv3.
+ Supports additional suffixes 'b' for 512 bytes,
+ 'g' for 1GiB for the -b option.
config BUSYBOX_CONFIG_STAT
bool "stat"
default BUSYBOX_DEFAULT_STAT
help
- display file or filesystem status.
+ display file or filesystem status.
config BUSYBOX_CONFIG_FEATURE_STAT_FORMAT
bool "Enable custom formats (-c)"
default BUSYBOX_DEFAULT_FEATURE_STAT_FORMAT
depends on BUSYBOX_CONFIG_STAT
help
- Without this, stat will not support the '-c format' option where
- users can pass a custom format string for output. This adds about
- 7k to a nonstatic build on amd64.
+ Without this, stat will not support the '-c format' option where
+ users can pass a custom format string for output. This adds about
+ 7k to a nonstatic build on amd64.
config BUSYBOX_CONFIG_FEATURE_STAT_FILESYSTEM
bool "Enable display of filesystem status (-f)"
depends on BUSYBOX_CONFIG_STAT
select BUSYBOX_CONFIG_PLATFORM_LINUX # statfs()
help
- Without this, stat will not support the '-f' option to display
- information about filesystem status.
+ Without this, stat will not support the '-f' option to display
+ information about filesystem status.
config BUSYBOX_CONFIG_STTY
bool "stty"
default BUSYBOX_DEFAULT_STTY
help
- stty is used to change and print terminal line settings.
+ stty is used to change and print terminal line settings.
config BUSYBOX_CONFIG_SUM
bool "sum"
default BUSYBOX_DEFAULT_SUM
help
- checksum and count the blocks in a file
+ checksum and count the blocks in a file
config BUSYBOX_CONFIG_SYNC
bool "sync"
default BUSYBOX_DEFAULT_SYNC
help
- sync is used to flush filesystem buffers.
+ sync is used to flush filesystem buffers.
config BUSYBOX_CONFIG_FEATURE_SYNC_FANCY
bool "Enable -d and -f flags (requires syncfs(2) in libc)"
default BUSYBOX_DEFAULT_FEATURE_SYNC_FANCY
depends on BUSYBOX_CONFIG_SYNC
help
- sync -d FILE... executes fdatasync() on each FILE.
- sync -f FILE... executes syncfs() on each FILE.
+ sync -d FILE... executes fdatasync() on each FILE.
+ sync -f FILE... executes syncfs() on each FILE.
config BUSYBOX_CONFIG_TAC
bool "tac"
default BUSYBOX_DEFAULT_TAC
help
- tac is used to concatenate and print files in reverse.
+ tac is used to concatenate and print files in reverse.
config BUSYBOX_CONFIG_TAIL
bool "tail"
default BUSYBOX_DEFAULT_TAIL
help
- tail is used to print the last specified number of lines
- from files.
+ tail is used to print the last specified number of lines
+ from files.
config BUSYBOX_CONFIG_FEATURE_FANCY_TAIL
bool "Enable -q, -s, -v, and -F options"
default BUSYBOX_DEFAULT_FEATURE_FANCY_TAIL
depends on BUSYBOX_CONFIG_TAIL
help
- These options are provided by GNU tail, but
- are not specific in the SUSv3 standard:
+ These options are provided by GNU tail, but
+ are not specific in the SUSv3 standard:
-q Never output headers giving file names
-s SEC Wait SEC seconds between reads with -f
-v Always output headers giving file names
bool "tee"
default BUSYBOX_DEFAULT_TEE
help
- tee is used to read from standard input and write
- to standard output and files.
+ tee is used to read from standard input and write
+ to standard output and files.
config BUSYBOX_CONFIG_FEATURE_TEE_USE_BLOCK_IO
bool "Enable block I/O (larger/faster) instead of byte I/O"
default BUSYBOX_DEFAULT_FEATURE_TEE_USE_BLOCK_IO
depends on BUSYBOX_CONFIG_TEE
help
- Enable this option for a faster tee, at expense of size.
+ Enable this option for a faster tee, at expense of size.
config BUSYBOX_CONFIG_TEST
bool "test"
default BUSYBOX_DEFAULT_TEST
help
- test is used to check file types and compare values,
- returning an appropriate exit code. The bash shell
- has test built in, ash can build it in optionally.
+ test is used to check file types and compare values,
+ returning an appropriate exit code. The bash shell
+ has test built in, ash can build it in optionally.
config BUSYBOX_CONFIG_TEST1
bool "test as ["
default BUSYBOX_DEFAULT_TEST1
help
- Provide test command in the "[ EXPR ]" form
+ Provide test command in the "[ EXPR ]" form
config BUSYBOX_CONFIG_TEST2
bool "test as [["
default BUSYBOX_DEFAULT_TEST2
help
- Provide test command in the "[[ EXPR ]]" form
+ Provide test command in the "[[ EXPR ]]" form
config BUSYBOX_CONFIG_FEATURE_TEST_64
bool "Extend test to 64 bit"
default BUSYBOX_DEFAULT_FEATURE_TEST_64
depends on BUSYBOX_CONFIG_TEST || BUSYBOX_CONFIG_TEST1 || BUSYBOX_CONFIG_TEST2 || BUSYBOX_CONFIG_ASH_TEST || BUSYBOX_CONFIG_HUSH_TEST
help
- Enable 64-bit support in test.
+ Enable 64-bit support in test.
config BUSYBOX_CONFIG_TIMEOUT
bool "timeout"
default BUSYBOX_DEFAULT_TIMEOUT
help
- Runs a program and watches it. If it does not terminate in
- specified number of seconds, it is sent a signal.
+ Runs a program and watches it. If it does not terminate in
+ specified number of seconds, it is sent a signal.
config BUSYBOX_CONFIG_TOUCH
bool "touch"
default BUSYBOX_DEFAULT_TOUCH
help
- touch is used to create or change the access and/or
- modification timestamp of specified files.
+ touch is used to create or change the access and/or
+ modification timestamp of specified files.
config BUSYBOX_CONFIG_FEATURE_TOUCH_NODEREF
bool "Add support for -h"
default BUSYBOX_DEFAULT_FEATURE_TOUCH_NODEREF
depends on BUSYBOX_CONFIG_TOUCH
help
- Enable touch to have the -h option.
- This requires libc support for lutimes() function.
+ Enable touch to have the -h option.
+ This requires libc support for lutimes() function.
config BUSYBOX_CONFIG_FEATURE_TOUCH_SUSV3
bool "Add support for SUSV3 features (-d -t -r)"
default BUSYBOX_DEFAULT_FEATURE_TOUCH_SUSV3
depends on BUSYBOX_CONFIG_TOUCH
help
- Enable touch to use a reference file or a given date/time argument.
+ Enable touch to use a reference file or a given date/time argument.
config BUSYBOX_CONFIG_TR
bool "tr"
default BUSYBOX_DEFAULT_TR
help
- tr is used to squeeze, and/or delete characters from standard
- input, writing to standard output.
+ tr is used to squeeze, and/or delete characters from standard
+ input, writing to standard output.
config BUSYBOX_CONFIG_FEATURE_TR_CLASSES
bool "Enable character classes (such as [:upper:])"
default BUSYBOX_DEFAULT_FEATURE_TR_CLASSES
depends on BUSYBOX_CONFIG_TR
help
- Enable character classes, enabling commands such as:
- tr [:upper:] [:lower:] to convert input into lowercase.
+ Enable character classes, enabling commands such as:
+ tr [:upper:] [:lower:] to convert input into lowercase.
config BUSYBOX_CONFIG_FEATURE_TR_EQUIV
bool "Enable equivalence classes"
default BUSYBOX_DEFAULT_FEATURE_TR_EQUIV
depends on BUSYBOX_CONFIG_TR
help
- Enable equivalence classes, which essentially add the enclosed
- character to the current set. For instance, tr [=a=] xyz would
- replace all instances of 'a' with 'xyz'. This option is mainly
- useful for cases when no other way of expressing a character
- is possible.
+ Enable equivalence classes, which essentially add the enclosed
+ character to the current set. For instance, tr [=a=] xyz would
+ replace all instances of 'a' with 'xyz'. This option is mainly
+ useful for cases when no other way of expressing a character
+ is possible.
config BUSYBOX_CONFIG_TRUE
bool "true"
default BUSYBOX_DEFAULT_TRUE
help
- true returns an exit code of TRUE (0).
+ true returns an exit code of TRUE (0).
config BUSYBOX_CONFIG_TRUNCATE
bool "truncate"
default BUSYBOX_DEFAULT_TRUNCATE
help
- truncate truncates files to a given size. If a file does
- not exist, it is created unless told otherwise.
+ truncate truncates files to a given size. If a file does
+ not exist, it is created unless told otherwise.
config BUSYBOX_CONFIG_TTY
bool "tty"
default BUSYBOX_DEFAULT_TTY
help
- tty is used to print the name of the current terminal to
- standard output.
+ tty is used to print the name of the current terminal to
+ standard output.
config BUSYBOX_CONFIG_UNAME
bool "uname"
default BUSYBOX_DEFAULT_UNAME
help
- uname is used to print system information.
+ uname is used to print system information.
config BUSYBOX_CONFIG_UNAME_OSNAME
string "Operating system name"
default BUSYBOX_DEFAULT_UNAME_OSNAME
depends on BUSYBOX_CONFIG_UNAME
help
- Sets the operating system name reported by uname -o. The
- default BUSYBOX_DEFAULT_UNAME_OSNAME "GNU/Linux".
+ Sets the operating system name reported by uname -o. The
+ default BUSYBOX_DEFAULT_UNAME_OSNAME "GNU/Linux".
config BUSYBOX_CONFIG_UNIQ
bool "uniq"
default BUSYBOX_DEFAULT_UNIQ
help
- uniq is used to remove duplicate lines from a sorted file.
+ uniq is used to remove duplicate lines from a sorted file.
config BUSYBOX_CONFIG_UNLINK
bool "unlink"
default BUSYBOX_DEFAULT_UNLINK
help
- unlink deletes a file by calling unlink()
+ unlink deletes a file by calling unlink()
config BUSYBOX_CONFIG_USLEEP
bool "usleep"
default BUSYBOX_DEFAULT_USLEEP
help
- usleep is used to pause for a specified number of microseconds.
+ usleep is used to pause for a specified number of microseconds.
config BUSYBOX_CONFIG_UUDECODE
bool "uudecode"
default BUSYBOX_DEFAULT_UUDECODE
help
- uudecode is used to decode a uuencoded file.
+ uudecode is used to decode a uuencoded file.
config BUSYBOX_CONFIG_BASE64
bool "base64"
default BUSYBOX_DEFAULT_BASE64
help
- Base64 encode and decode
+ Base64 encode and decode
config BUSYBOX_CONFIG_UUENCODE
bool "uuencode"
default BUSYBOX_DEFAULT_UUENCODE
help
- uuencode is used to uuencode a file.
+ uuencode is used to uuencode a file.
config BUSYBOX_CONFIG_WC
bool "wc"
default BUSYBOX_DEFAULT_WC
help
- wc is used to print the number of bytes, words, and lines,
- in specified files.
+ wc is used to print the number of bytes, words, and lines,
+ in specified files.
config BUSYBOX_CONFIG_FEATURE_WC_LARGE
bool "Support very large counts"
default BUSYBOX_DEFAULT_FEATURE_WC_LARGE
depends on BUSYBOX_CONFIG_WC
help
- Use "unsigned long long" for counter variables.
+ Use "unsigned long long" for counter variables.
config BUSYBOX_CONFIG_WHO
bool "who"
default BUSYBOX_DEFAULT_WHO
bool "whoami"
default BUSYBOX_DEFAULT_WHOAMI
help
- whoami is used to print the username of the current
- user id (same as id -un).
+ whoami is used to print the username of the current
+ user id (same as id -un).
config BUSYBOX_CONFIG_YES
bool "yes"
default BUSYBOX_DEFAULT_YES
help
- yes is used to repeatedly output a specific string, or
- the default string `y'.
+ yes is used to repeatedly output a specific string, or
+ the default string `y'.
comment "Common options"
bool "Support verbose options (usually -v) for various applets"
default BUSYBOX_DEFAULT_FEATURE_VERBOSE
help
- Enable cp -v, rm -v and similar messages.
- Also enables long option (--verbose) if it exists.
- Without this option, -v is accepted but ignored.
+ Enable cp -v, rm -v and similar messages.
+ Also enables long option (--verbose) if it exists.
+ Without this option, -v is accepted but ignored.
comment "Common options for cp and mv"
depends on BUSYBOX_CONFIG_CP || BUSYBOX_CONFIG_MV
default BUSYBOX_DEFAULT_FEATURE_PRESERVE_HARDLINKS
depends on BUSYBOX_CONFIG_CP || BUSYBOX_CONFIG_MV
help
- Allow cp and mv to preserve hard links.
+ Allow cp and mv to preserve hard links.
comment "Common options for df, du, ls"
depends on BUSYBOX_CONFIG_DF || BUSYBOX_CONFIG_DU || BUSYBOX_CONFIG_LS
default BUSYBOX_DEFAULT_FEATURE_HUMAN_READABLE
depends on BUSYBOX_CONFIG_DF || BUSYBOX_CONFIG_DU || BUSYBOX_CONFIG_LS
help
- Allow df, du, and ls to have human readable output.
+ Allow df, du, and ls to have human readable output.
endmenu
bool "pipe_progress"
default BUSYBOX_DEFAULT_PIPE_PROGRESS
help
- Display a dot to indicate pipe activity.
+ Display a dot to indicate pipe activity.
config BUSYBOX_CONFIG_RUN_PARTS
bool "run-parts"
default BUSYBOX_DEFAULT_RUN_PARTS
help
- run-parts is a utility designed to run all the scripts in a directory.
+ run-parts is a utility designed to run all the scripts in a directory.
- It is useful to set up a directory like cron.daily, where you need to
- execute all the scripts in that directory.
+ It is useful to set up a directory like cron.daily, where you need to
+ execute all the scripts in that directory.
- In this implementation of run-parts some features (such as report
- mode) are not implemented.
+ In this implementation of run-parts some features (such as report
+ mode) are not implemented.
- Unless you know that run-parts is used in some of your scripts
- you can safely say N here.
+ Unless you know that run-parts is used in some of your scripts
+ you can safely say N here.
config BUSYBOX_CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS
bool "Enable long options"
default BUSYBOX_DEFAULT_FEATURE_RUN_PARTS_FANCY
depends on BUSYBOX_CONFIG_RUN_PARTS
help
- Support additional options:
- -l --list print the names of the all matching files (not
+ Support additional options:
+ -l --list print the names of the all matching files (not
limited to executables), but don't actually run them.
config BUSYBOX_CONFIG_START_STOP_DAEMON
bool "start-stop-daemon"
default BUSYBOX_DEFAULT_START_STOP_DAEMON
help
- start-stop-daemon is used to control the creation and
- termination of system-level processes, usually the ones
- started during the startup of the system.
+ start-stop-daemon is used to control the creation and
+ termination of system-level processes, usually the ones
+ started during the startup of the system.
config BUSYBOX_CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS
bool "Enable long options"
default BUSYBOX_DEFAULT_FEATURE_START_STOP_DAEMON_FANCY
depends on BUSYBOX_CONFIG_START_STOP_DAEMON
help
- -o|--oknodo ignored since we exit with 0 anyway
- -v|--verbose
- -N|--nicelevel N
+ -o|--oknodo ignored since we exit with 0 anyway
+ -v|--verbose
+ -N|--nicelevel N
config BUSYBOX_CONFIG_WHICH
bool "which"
default BUSYBOX_DEFAULT_WHICH
help
- which is used to find programs in your PATH and
- print out their pathnames.
+ which is used to find programs in your PATH and
+ print out their pathnames.
endmenu
bool "chattr"
default BUSYBOX_DEFAULT_CHATTR
help
- chattr changes the file attributes on a second extended file system.
+ chattr changes the file attributes on a second extended file system.
config BUSYBOX_CONFIG_FSCK
bool "fsck"
default BUSYBOX_DEFAULT_FSCK
help
- fsck is used to check and optionally repair one or more filesystems.
- In actuality, fsck is simply a front-end for the various file system
- checkers (fsck.fstype) available under Linux.
+ fsck is used to check and optionally repair one or more filesystems.
+ In actuality, fsck is simply a front-end for the various file system
+ checkers (fsck.fstype) available under Linux.
config BUSYBOX_CONFIG_LSATTR
bool "lsattr"
default BUSYBOX_DEFAULT_LSATTR
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- lsattr lists the file attributes on a second extended file system.
+ lsattr lists the file attributes on a second extended file system.
config BUSYBOX_CONFIG_TUNE2FS
bool "tune2fs"
default BUSYBOX_DEFAULT_TUNE2FS # off: it is too limited compared to upstream version
help
- tune2fs allows the system administrator to adjust various tunable
- filesystem parameters on Linux ext2/ext3 filesystems.
+ tune2fs allows the system administrator to adjust various tunable
+ filesystem parameters on Linux ext2/ext3 filesystems.
### config E2FSCK
### bool "e2fsck"
bool "chattr"
default BUSYBOX_DEFAULT_CHATTR
help
- chattr changes the file attributes on a second extended file system.
+ chattr changes the file attributes on a second extended file system.
config BUSYBOX_CONFIG_E2FSCK
bool "e2fsck"
default BUSYBOX_DEFAULT_E2FSCK
help
- e2fsck is used to check Linux second extended file systems (ext2fs).
- e2fsck also supports ext2 filesystems countaining a journal (ext3).
- The normal compat symlinks 'fsck.ext2' and 'fsck.ext3' are also
- provided.
+ e2fsck is used to check Linux second extended file systems (ext2fs).
+ e2fsck also supports ext2 filesystems countaining a journal (ext3).
+ The normal compat symlinks 'fsck.ext2' and 'fsck.ext3' are also
+ provided.
config BUSYBOX_CONFIG_FSCK
bool "fsck"
default BUSYBOX_DEFAULT_FSCK
help
- fsck is used to check and optionally repair one or more filesystems.
- In actuality, fsck is simply a front-end for the various file system
- checkers (fsck.fstype) available under Linux.
+ fsck is used to check and optionally repair one or more filesystems.
+ In actuality, fsck is simply a front-end for the various file system
+ checkers (fsck.fstype) available under Linux.
config BUSYBOX_CONFIG_LSATTR
bool "lsattr"
default BUSYBOX_DEFAULT_LSATTR
help
- lsattr lists the file attributes on a second extended file system.
+ lsattr lists the file attributes on a second extended file system.
config BUSYBOX_CONFIG_MKE2FS
bool "mke2fs"
default BUSYBOX_DEFAULT_MKE2FS
help
- mke2fs is used to create an ext2/ext3 filesystem. The normal compat
- symlinks 'mkfs.ext2' and 'mkfs.ext3' are also provided.
+ mke2fs is used to create an ext2/ext3 filesystem. The normal compat
+ symlinks 'mkfs.ext2' and 'mkfs.ext3' are also provided.
config BUSYBOX_CONFIG_TUNE2FS
bool "tune2fs"
default BUSYBOX_DEFAULT_TUNE2FS
help
- tune2fs allows the system administrator to adjust various tunable
- filesystem parameters on Linux ext2/ext3 filesystems.
+ tune2fs allows the system administrator to adjust various tunable
+ filesystem parameters on Linux ext2/ext3 filesystems.
config BUSYBOX_CONFIG_E2LABEL
bool "e2label"
default BUSYBOX_DEFAULT_E2LABEL
depends on BUSYBOX_CONFIG_TUNE2FS
help
- e2label will display or change the filesystem label on the ext2
- filesystem located on device.
+ e2label will display or change the filesystem label on the ext2
+ filesystem located on device.
config BUSYBOX_CONFIG_FINDFS
bool "findfs"
default BUSYBOX_DEFAULT_FINDFS
depends on BUSYBOX_CONFIG_TUNE2FS
help
- findfs will search the disks in the system looking for a filesystem
- which has a label matching label or a UUID equal to uuid.
+ findfs will search the disks in the system looking for a filesystem
+ which has a label matching label or a UUID equal to uuid.
endmenu
bool "awk"
default BUSYBOX_DEFAULT_AWK
help
- Awk is used as a pattern scanning and processing language. This is
- the BusyBox implementation of that programming language.
+ Awk is used as a pattern scanning and processing language. This is
+ the BusyBox implementation of that programming language.
config BUSYBOX_CONFIG_FEATURE_AWK_LIBM
bool "Enable math functions (requires libm)"
default BUSYBOX_DEFAULT_FEATURE_AWK_LIBM
depends on BUSYBOX_CONFIG_AWK
help
- Enable math functions of the Awk programming language.
- NOTE: This will require libm to be present for linking.
+ Enable math functions of the Awk programming language.
+ NOTE: This will require libm to be present for linking.
config BUSYBOX_CONFIG_FEATURE_AWK_GNU_EXTENSIONS
bool "Enable a few GNU extensions"
default BUSYBOX_DEFAULT_FEATURE_AWK_GNU_EXTENSIONS
depends on BUSYBOX_CONFIG_AWK
help
- Enable a few features from gawk:
- * command line option -e AWK_PROGRAM
- * simultaneous use of -f and -e on the command line.
+ Enable a few features from gawk:
+ * command line option -e AWK_PROGRAM
+ * simultaneous use of -f and -e on the command line.
This enables the use of awk library files.
Ex: awk -f mylib.awk -e '{print myfunction($1);}' ...
config BUSYBOX_CONFIG_CMP
bool "cmp"
default BUSYBOX_DEFAULT_CMP
help
- cmp is used to compare two files and returns the result
- to standard output.
+ cmp is used to compare two files and returns the result
+ to standard output.
config BUSYBOX_CONFIG_DIFF
bool "diff"
default BUSYBOX_DEFAULT_DIFF
help
- diff compares two files or directories and outputs the
- differences between them in a form that can be given to
- the patch command.
+ diff compares two files or directories and outputs the
+ differences between them in a form that can be given to
+ the patch command.
config BUSYBOX_CONFIG_FEATURE_DIFF_LONG_OPTIONS
bool "Enable long options"
default BUSYBOX_DEFAULT_FEATURE_DIFF_DIR
depends on BUSYBOX_CONFIG_DIFF
help
- This option enables support for directory and subdirectory
- comparison.
+ This option enables support for directory and subdirectory
+ comparison.
config BUSYBOX_CONFIG_ED
bool "ed"
default BUSYBOX_DEFAULT_ED
help
- The original 1970's Unix text editor, from the days of teletypes.
- Small, simple, evil. Part of SUSv3. If you're not already using
- this, you don't need it.
+ The original 1970's Unix text editor, from the days of teletypes.
+ Small, simple, evil. Part of SUSv3. If you're not already using
+ this, you don't need it.
config BUSYBOX_CONFIG_PATCH
bool "patch"
default BUSYBOX_DEFAULT_PATCH
help
- Apply a unified diff formatted patch.
+ Apply a unified diff formatted patch.
config BUSYBOX_CONFIG_SED
bool "sed"
default BUSYBOX_DEFAULT_SED
help
- sed is used to perform text transformations on a file
- or input from a pipeline.
+ sed is used to perform text transformations on a file
+ or input from a pipeline.
config BUSYBOX_CONFIG_VI
bool "vi"
default BUSYBOX_DEFAULT_VI
help
- 'vi' is a text editor. More specifically, it is the One True
- text editor <grin>. It does, however, have a rather steep
- learning curve. If you are not already comfortable with 'vi'
- you may wish to use something else.
+ 'vi' is a text editor. More specifically, it is the One True
+ text editor <grin>. It does, however, have a rather steep
+ learning curve. If you are not already comfortable with 'vi'
+ you may wish to use something else.
config BUSYBOX_CONFIG_FEATURE_VI_MAX_LEN
int "Maximum screen width"
default BUSYBOX_DEFAULT_FEATURE_VI_MAX_LEN
depends on BUSYBOX_CONFIG_VI
help
- Contrary to what you may think, this is not eating much.
- Make it smaller than 4k only if you are very limited on memory.
+ Contrary to what you may think, this is not eating much.
+ Make it smaller than 4k only if you are very limited on memory.
config BUSYBOX_CONFIG_FEATURE_VI_8BIT
bool "Allow to display 8-bit chars (otherwise shows dots)"
default BUSYBOX_DEFAULT_FEATURE_VI_8BIT
depends on BUSYBOX_CONFIG_VI
help
- If your terminal can display characters with high bit set,
- you may want to enable this. Note: vi is not Unicode-capable.
- If your terminal combines several 8-bit bytes into one character
- (as in Unicode mode), this will not work properly.
+ If your terminal can display characters with high bit set,
+ you may want to enable this. Note: vi is not Unicode-capable.
+ If your terminal combines several 8-bit bytes into one character
+ (as in Unicode mode), this will not work properly.
config BUSYBOX_CONFIG_FEATURE_VI_COLON
bool "Enable \":\" colon commands (no \"ex\" mode)"
default BUSYBOX_DEFAULT_FEATURE_VI_COLON
depends on BUSYBOX_CONFIG_VI
help
- Enable a limited set of colon commands. This does not
- provide an "ex" mode.
+ Enable a limited set of colon commands. This does not
+ provide an "ex" mode.
config BUSYBOX_CONFIG_FEATURE_VI_YANKMARK
bool "Enable yank/put commands and mark cmds"
default BUSYBOX_DEFAULT_FEATURE_VI_YANKMARK
depends on BUSYBOX_CONFIG_VI
help
- This will enable you to use yank and put, as well as mark.
+ This will enable you to use yank and put, as well as mark.
config BUSYBOX_CONFIG_FEATURE_VI_SEARCH
bool "Enable search and replace cmds"
default BUSYBOX_DEFAULT_FEATURE_VI_SEARCH
depends on BUSYBOX_CONFIG_VI
help
- Select this if you wish to be able to do search and replace.
+ Select this if you wish to be able to do search and replace.
config BUSYBOX_CONFIG_FEATURE_VI_REGEX_SEARCH
bool "Enable regex in search and replace"
default BUSYBOX_DEFAULT_FEATURE_VI_REGEX_SEARCH # Uses GNU regex, which may be unavailable. FIXME
depends on BUSYBOX_CONFIG_FEATURE_VI_SEARCH
help
- Use extended regex search.
+ Use extended regex search.
config BUSYBOX_CONFIG_FEATURE_VI_USE_SIGNALS
bool "Catch signals"
default BUSYBOX_DEFAULT_FEATURE_VI_USE_SIGNALS
depends on BUSYBOX_CONFIG_VI
help
- Selecting this option will make vi signal aware. This will support
- SIGWINCH to deal with Window Changes, catch ^Z and ^C and alarms.
+ Selecting this option will make vi signal aware. This will support
+ SIGWINCH to deal with Window Changes, catch ^Z and ^C and alarms.
config BUSYBOX_CONFIG_FEATURE_VI_DOT_CMD
bool "Remember previous cmd and \".\" cmd"
default BUSYBOX_DEFAULT_FEATURE_VI_DOT_CMD
depends on BUSYBOX_CONFIG_VI
help
- Make vi remember the last command and be able to repeat it.
+ Make vi remember the last command and be able to repeat it.
config BUSYBOX_CONFIG_FEATURE_VI_READONLY
bool "Enable -R option and \"view\" mode"
default BUSYBOX_DEFAULT_FEATURE_VI_READONLY
depends on BUSYBOX_CONFIG_VI
help
- Enable the read-only command line option, which allows the user to
- open a file in read-only mode.
+ Enable the read-only command line option, which allows the user to
+ open a file in read-only mode.
config BUSYBOX_CONFIG_FEATURE_VI_SETOPTS
bool "Enable settable options, ai ic showmatch"
default BUSYBOX_DEFAULT_FEATURE_VI_SETOPTS
depends on BUSYBOX_CONFIG_VI
help
- Enable the editor to set some (ai, ic, showmatch) options.
+ Enable the editor to set some (ai, ic, showmatch) options.
config BUSYBOX_CONFIG_FEATURE_VI_SET
bool "Support :set"
default BUSYBOX_DEFAULT_FEATURE_VI_WIN_RESIZE
depends on BUSYBOX_CONFIG_VI
help
- Behave nicely with terminals that get resized.
+ Behave nicely with terminals that get resized.
config BUSYBOX_CONFIG_FEATURE_VI_ASK_TERMINAL
bool "Use 'tell me cursor position' ESC sequence to measure window"
default BUSYBOX_DEFAULT_FEATURE_VI_ASK_TERMINAL
depends on BUSYBOX_CONFIG_VI
help
- If terminal size can't be retrieved and $LINES/$COLUMNS are not set,
- this option makes vi perform a last-ditch effort to find it:
- position cursor to 999,999 and ask terminal to report real
- cursor position using "ESC [ 6 n" escape sequence, then read stdin.
- This is not clean but helps a lot on serial lines and such.
+ If terminal size can't be retrieved and $LINES/$COLUMNS are not set,
+ this option makes vi perform a last-ditch effort to find it:
+ position cursor to 999,999 and ask terminal to report real
+ cursor position using "ESC [ 6 n" escape sequence, then read stdin.
+ This is not clean but helps a lot on serial lines and such.
config BUSYBOX_CONFIG_FEATURE_VI_UNDO
bool "Support undo command \"u\""
default BUSYBOX_DEFAULT_FEATURE_VI_UNDO
depends on BUSYBOX_CONFIG_VI
help
- Support the 'u' command to undo insertion, deletion, and replacement
- of text.
+ Support the 'u' command to undo insertion, deletion, and replacement
+ of text.
config BUSYBOX_CONFIG_FEATURE_VI_UNDO_QUEUE
bool "Enable undo operation queuing"
default BUSYBOX_DEFAULT_FEATURE_VI_UNDO_QUEUE
depends on BUSYBOX_CONFIG_FEATURE_VI_UNDO
help
- The vi undo functions can use an intermediate queue to greatly lower
- malloc() calls and overhead. When the maximum size of this queue is
- reached, the contents of the queue are committed to the undo stack.
- This increases the size of the undo code and allows some undo
- operations (especially un-typing/backspacing) to be far more useful.
+ The vi undo functions can use an intermediate queue to greatly lower
+ malloc() calls and overhead. When the maximum size of this queue is
+ reached, the contents of the queue are committed to the undo stack.
+ This increases the size of the undo code and allows some undo
+ operations (especially un-typing/backspacing) to be far more useful.
config BUSYBOX_CONFIG_FEATURE_VI_UNDO_QUEUE_MAX
int "Maximum undo character queue size"
range 32 65536
depends on BUSYBOX_CONFIG_FEATURE_VI_UNDO_QUEUE
help
- This option sets the number of bytes used at runtime for the queue.
- Smaller values will create more undo objects and reduce the amount
- of typed or backspaced characters that are grouped into one undo
- operation; larger values increase the potential size of each undo
- and will generally malloc() larger objects and less frequently.
- Unless you want more (or less) frequent "undo points" while typing,
- you should probably leave this unchanged.
+ This option sets the number of bytes used at runtime for the queue.
+ Smaller values will create more undo objects and reduce the amount
+ of typed or backspaced characters that are grouped into one undo
+ operation; larger values increase the potential size of each undo
+ and will generally malloc() larger objects and less frequently.
+ Unless you want more (or less) frequent "undo points" while typing,
+ you should probably leave this unchanged.
config BUSYBOX_CONFIG_FEATURE_ALLOW_EXEC
bool "Allow vi and awk to execute shell commands"
default BUSYBOX_DEFAULT_FEATURE_ALLOW_EXEC
depends on BUSYBOX_CONFIG_VI || BUSYBOX_CONFIG_AWK
help
- Enables vi and awk features which allow user to execute
- shell commands (using system() C call).
+ Enables vi and awk features which allow user to execute
+ shell commands (using system() C call).
endmenu
bool "find"
default BUSYBOX_DEFAULT_FIND
help
- find is used to search your system to find specified files.
+ find is used to search your system to find specified files.
config BUSYBOX_CONFIG_FEATURE_FIND_PRINT0
bool "Enable -print0: NUL-terminated output"
default BUSYBOX_DEFAULT_FEATURE_FIND_PRINT0
depends on BUSYBOX_CONFIG_FIND
help
- Causes output names to be separated by a NUL character
- rather than a newline. This allows names that contain
- newlines and other whitespace to be more easily
- interpreted by other programs.
+ Causes output names to be separated by a NUL character
+ rather than a newline. This allows names that contain
+ newlines and other whitespace to be more easily
+ interpreted by other programs.
config BUSYBOX_CONFIG_FEATURE_FIND_MTIME
bool "Enable -mtime: modified time matching"
default BUSYBOX_DEFAULT_FEATURE_FIND_MTIME
depends on BUSYBOX_CONFIG_FIND
help
- Allow searching based on the modification time of
- files, in days.
+ Allow searching based on the modification time of
+ files, in days.
config BUSYBOX_CONFIG_FEATURE_FIND_MMIN
bool "Enable -mmin: modified time matching by minutes"
default BUSYBOX_DEFAULT_FEATURE_FIND_MMIN
depends on BUSYBOX_CONFIG_FIND
help
- Allow searching based on the modification time of
- files, in minutes.
+ Allow searching based on the modification time of
+ files, in minutes.
config BUSYBOX_CONFIG_FEATURE_FIND_PERM
bool "Enable -perm: permissions matching"
default BUSYBOX_DEFAULT_FEATURE_FIND_TYPE
depends on BUSYBOX_CONFIG_FIND
help
- Enable searching based on file type (file,
- directory, socket, device, etc.).
+ Enable searching based on file type (file,
+ directory, socket, device, etc.).
config BUSYBOX_CONFIG_FEATURE_FIND_XDEV
bool "Enable -xdev: 'stay in filesystem'"
default BUSYBOX_DEFAULT_FEATURE_FIND_NEWER
depends on BUSYBOX_CONFIG_FIND
help
- Support the 'find -newer' option for finding any files which have
- modification time that is more recent than the specified FILE.
+ Support the 'find -newer' option for finding any files which have
+ modification time that is more recent than the specified FILE.
config BUSYBOX_CONFIG_FEATURE_FIND_INUM
bool "Enable -inum: inode number matching"
default BUSYBOX_DEFAULT_FEATURE_FIND_EXEC
depends on BUSYBOX_CONFIG_FIND
help
- Support the 'find -exec' option for executing commands based upon
- the files matched.
+ Support the 'find -exec' option for executing commands based upon
+ the files matched.
config BUSYBOX_CONFIG_FEATURE_FIND_EXEC_PLUS
bool "Enable -exec ... {} +"
default BUSYBOX_DEFAULT_FEATURE_FIND_EXEC_PLUS
depends on BUSYBOX_CONFIG_FEATURE_FIND_EXEC
help
- Support the 'find -exec ... {} +' option for executing commands
- for all matched files at once.
- Without this option, -exec + is a synonym for -exec ;
- (IOW: it works correctly, but without expected speedup)
+ Support the 'find -exec ... {} +' option for executing commands
+ for all matched files at once.
+ Without this option, -exec + is a synonym for -exec ;
+ (IOW: it works correctly, but without expected speedup)
config BUSYBOX_CONFIG_FEATURE_FIND_USER
bool "Enable -user: username/uid matching"
default BUSYBOX_DEFAULT_FEATURE_FIND_NOT
depends on BUSYBOX_CONFIG_FIND
help
- Support the '!' operator to invert the test results.
- If 'Enable full-blown desktop' is enabled, then will also support
- the non-POSIX notation '-not'.
+ Support the '!' operator to invert the test results.
+ If 'Enable full-blown desktop' is enabled, then will also support
+ the non-POSIX notation '-not'.
config BUSYBOX_CONFIG_FEATURE_FIND_DEPTH
bool "Enable -depth"
default BUSYBOX_DEFAULT_FEATURE_FIND_DEPTH
depends on BUSYBOX_CONFIG_FIND
help
- Process each directory's contents before the directory itself.
+ Process each directory's contents before the directory itself.
config BUSYBOX_CONFIG_FEATURE_FIND_PAREN
bool "Enable parens in options"
default BUSYBOX_DEFAULT_FEATURE_FIND_PAREN
depends on BUSYBOX_CONFIG_FIND
help
- Enable usage of parens '(' to specify logical order of arguments.
+ Enable usage of parens '(' to specify logical order of arguments.
config BUSYBOX_CONFIG_FEATURE_FIND_SIZE
bool "Enable -size: file size matching"
default BUSYBOX_DEFAULT_FEATURE_FIND_PRUNE
depends on BUSYBOX_CONFIG_FIND
help
- If the file is a directory, don't descend into it. Useful for
- exclusion .svn and CVS directories.
+ If the file is a directory, don't descend into it. Useful for
+ exclusion .svn and CVS directories.
config BUSYBOX_CONFIG_FEATURE_FIND_DELETE
bool "Enable -delete: delete files/dirs"
default BUSYBOX_DEFAULT_FEATURE_FIND_DELETE
depends on BUSYBOX_CONFIG_FIND && BUSYBOX_CONFIG_FEATURE_FIND_DEPTH
help
- Support the 'find -delete' option for deleting files and directories.
- WARNING: This option can do much harm if used wrong. Busybox will not
- try to protect the user from doing stupid things. Use with care.
+ Support the 'find -delete' option for deleting files and directories.
+ WARNING: This option can do much harm if used wrong. Busybox will not
+ try to protect the user from doing stupid things. Use with care.
config BUSYBOX_CONFIG_FEATURE_FIND_PATH
bool "Enable -path: match pathname with shell pattern"
default BUSYBOX_DEFAULT_FEATURE_FIND_PATH
depends on BUSYBOX_CONFIG_FIND
help
- The -path option matches whole pathname instead of just filename.
+ The -path option matches whole pathname instead of just filename.
config BUSYBOX_CONFIG_FEATURE_FIND_REGEX
bool "Enable -regex: match pathname with regex"
default BUSYBOX_DEFAULT_FEATURE_FIND_REGEX
depends on BUSYBOX_CONFIG_FIND
help
- The -regex option matches whole pathname against regular expression.
+ The -regex option matches whole pathname against regular expression.
config BUSYBOX_CONFIG_FEATURE_FIND_CONTEXT
bool "Enable -context: security context matching"
default BUSYBOX_DEFAULT_FEATURE_FIND_CONTEXT
depends on BUSYBOX_CONFIG_FIND && BUSYBOX_CONFIG_SELINUX
help
- Support the 'find -context' option for matching security context.
+ Support the 'find -context' option for matching security context.
config BUSYBOX_CONFIG_FEATURE_FIND_LINKS
bool "Enable -links: link count matching"
default BUSYBOX_DEFAULT_FEATURE_FIND_LINKS
depends on BUSYBOX_CONFIG_FIND
help
- Support the 'find -links' option for matching number of links.
+ Support the 'find -links' option for matching number of links.
config BUSYBOX_CONFIG_GREP
bool "grep"
default BUSYBOX_DEFAULT_GREP
help
- grep is used to search files for a specified pattern.
+ grep is used to search files for a specified pattern.
config BUSYBOX_CONFIG_EGREP
bool "egrep"
default BUSYBOX_DEFAULT_EGREP
help
- Alias to "grep -E"
+ Alias to "grep -E"
config BUSYBOX_CONFIG_FGREP
bool "fgrep"
default BUSYBOX_DEFAULT_FGREP
help
- Alias to "grep -F"
+ Alias to "grep -F"
config BUSYBOX_CONFIG_FEATURE_GREP_CONTEXT
bool "Enable before and after context flags (-A, -B and -C)"
default BUSYBOX_DEFAULT_FEATURE_GREP_CONTEXT
depends on BUSYBOX_CONFIG_GREP || BUSYBOX_CONFIG_EGREP || BUSYBOX_CONFIG_FGREP
help
- Print the specified number of leading (-B) and/or trailing (-A)
- context surrounding our matching lines.
- Print the specified number of context lines (-C).
+ Print the specified number of leading (-B) and/or trailing (-A)
+ context surrounding our matching lines.
+ Print the specified number of context lines (-C).
config BUSYBOX_CONFIG_XARGS
bool "xargs"
default BUSYBOX_DEFAULT_XARGS
help
- xargs is used to execute a specified command for
- every item from standard input.
+ xargs is used to execute a specified command for
+ every item from standard input.
config BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION
bool "Enable -p: prompt and confirmation"
default BUSYBOX_DEFAULT_FEATURE_XARGS_SUPPORT_CONFIRMATION
depends on BUSYBOX_CONFIG_XARGS
help
- Support -p: prompt the user whether to run each command
- line and read a line from the terminal.
+ Support -p: prompt the user whether to run each command
+ line and read a line from the terminal.
config BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_QUOTES
bool "Enable single and double quotes and backslash"
default BUSYBOX_DEFAULT_FEATURE_XARGS_SUPPORT_QUOTES
depends on BUSYBOX_CONFIG_XARGS
help
- Support quoting in the input.
+ Support quoting in the input.
config BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT
bool "Enable -x: exit if -s or -n is exceeded"
default BUSYBOX_DEFAULT_FEATURE_XARGS_SUPPORT_TERMOPT
depends on BUSYBOX_CONFIG_XARGS
help
- Support -x: exit if the command size (see the -s or -n option)
- is exceeded.
+ Support -x: exit if the command size (see the -s or -n option)
+ is exceeded.
config BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM
bool "Enable -0: NUL-terminated input"
default BUSYBOX_DEFAULT_FEATURE_XARGS_SUPPORT_ZERO_TERM
depends on BUSYBOX_CONFIG_XARGS
help
- Support -0: input items are terminated by a NUL character
- instead of whitespace, and the quotes and backslash
- are not special.
+ Support -0: input items are terminated by a NUL character
+ instead of whitespace, and the quotes and backslash
+ are not special.
config BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_REPL_STR
bool "Enable -I STR: string to replace"
default BUSYBOX_DEFAULT_FEATURE_XARGS_SUPPORT_REPL_STR
depends on BUSYBOX_CONFIG_XARGS
help
- Support -I STR and -i[STR] options.
+ Support -I STR and -i[STR] options.
endmenu
bool "bootchartd"
default BUSYBOX_DEFAULT_BOOTCHARTD
help
- bootchartd is commonly used to profile the boot process
- for the purpose of speeding it up. In this case, it is started
- by the kernel as the init process. This is configured by adding
- the init=/sbin/bootchartd option to the kernel command line.
+ bootchartd is commonly used to profile the boot process
+ for the purpose of speeding it up. In this case, it is started
+ by the kernel as the init process. This is configured by adding
+ the init=/sbin/bootchartd option to the kernel command line.
- It can also be used to monitor the resource usage of a specific
- application or the running system in general. In this case,
- bootchartd is started interactively by running bootchartd start
- and stopped using bootchartd stop.
+ It can also be used to monitor the resource usage of a specific
+ application or the running system in general. In this case,
+ bootchartd is started interactively by running bootchartd start
+ and stopped using bootchartd stop.
config BUSYBOX_CONFIG_FEATURE_BOOTCHARTD_BLOATED_HEADER
bool "Compatible, bloated header"
default BUSYBOX_DEFAULT_FEATURE_BOOTCHARTD_BLOATED_HEADER
depends on BUSYBOX_CONFIG_BOOTCHARTD
help
- Create extended header file compatible with "big" bootchartd.
- "Big" bootchartd is a shell script and it dumps some
- "convenient" info int the header, such as:
+ Create extended header file compatible with "big" bootchartd.
+ "Big" bootchartd is a shell script and it dumps some
+ "convenient" info int the header, such as:
title = Boot chart for `hostname` (`date`)
system.uname = `uname -srvm`
system.release = `cat /etc/DISTRO-release`
system.cpu = `grep '^model name' /proc/cpuinfo | head -1` ($cpucount)
system.kernel.options = `cat /proc/cmdline`
- This data is not mandatory for bootchart graph generation,
- and is considered bloat. Nevertheless, this option
- makes bootchartd applet to dump a subset of it.
+ This data is not mandatory for bootchart graph generation,
+ and is considered bloat. Nevertheless, this option
+ makes bootchartd applet to dump a subset of it.
config BUSYBOX_CONFIG_FEATURE_BOOTCHARTD_CONFIG_FILE
bool "Support bootchartd.conf"
default BUSYBOX_DEFAULT_FEATURE_BOOTCHARTD_CONFIG_FILE
depends on BUSYBOX_CONFIG_BOOTCHARTD
help
- Enable reading and parsing of $PWD/bootchartd.conf
- and /etc/bootchartd.conf files.
+ Enable reading and parsing of $PWD/bootchartd.conf
+ and /etc/bootchartd.conf files.
config BUSYBOX_CONFIG_HALT
bool "halt"
default BUSYBOX_DEFAULT_HALT
help
- Stop all processes and halt the system.
+ Stop all processes and halt the system.
config BUSYBOX_CONFIG_POWEROFF
bool "poweroff"
default BUSYBOX_DEFAULT_POWEROFF
help
- Stop all processes and power off the system.
+ Stop all processes and power off the system.
config BUSYBOX_CONFIG_REBOOT
bool "reboot"
default BUSYBOX_DEFAULT_REBOOT
help
- Stop all processes and reboot the system.
+ Stop all processes and reboot the system.
config BUSYBOX_CONFIG_FEATURE_CALL_TELINIT
bool "Call telinit on shutdown and reboot"
default BUSYBOX_DEFAULT_FEATURE_CALL_TELINIT
depends on (BUSYBOX_CONFIG_HALT || BUSYBOX_CONFIG_POWEROFF || BUSYBOX_CONFIG_REBOOT) && !BUSYBOX_CONFIG_INIT
help
- Call an external program (normally telinit) to facilitate
- a switch to a proper runlevel.
+ Call an external program (normally telinit) to facilitate
+ a switch to a proper runlevel.
- This option is only available if you selected halt and friends,
- but did not select init.
+ This option is only available if you selected halt and friends,
+ but did not select init.
config BUSYBOX_CONFIG_TELINIT_PATH
string "Path to telinit executable"
default BUSYBOX_DEFAULT_TELINIT_PATH
depends on BUSYBOX_CONFIG_FEATURE_CALL_TELINIT
help
- When busybox halt and friends have to call external telinit
- to facilitate proper shutdown, this path is to be used when
- locating telinit executable.
+ When busybox halt and friends have to call external telinit
+ to facilitate proper shutdown, this path is to be used when
+ locating telinit executable.
config BUSYBOX_CONFIG_INIT
bool "init"
default BUSYBOX_DEFAULT_INIT
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
- init is the first program run when the system boots.
+ init is the first program run when the system boots.
config BUSYBOX_CONFIG_LINUXRC
bool "linuxrc: support running init from initrd (not initramfs)"
default BUSYBOX_DEFAULT_LINUXRC
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
- Legacy support for running init under the old-style initrd. Allows
- the name linuxrc to act as init, and it doesn't assume init is PID 1.
+ Legacy support for running init under the old-style initrd. Allows
+ the name linuxrc to act as init, and it doesn't assume init is PID 1.
- This does not apply to initramfs, which runs /init as PID 1 and
- requires no special support.
+ This does not apply to initramfs, which runs /init as PID 1 and
+ requires no special support.
config BUSYBOX_CONFIG_FEATURE_USE_INITTAB
bool "Support reading an inittab file"
default BUSYBOX_DEFAULT_FEATURE_USE_INITTAB
depends on BUSYBOX_CONFIG_INIT || BUSYBOX_CONFIG_LINUXRC
help
- Allow init to read an inittab file when the system boot.
+ Allow init to read an inittab file when the system boot.
config BUSYBOX_CONFIG_FEATURE_KILL_REMOVED
bool "Support killing processes that have been removed from inittab"
default BUSYBOX_DEFAULT_FEATURE_KILL_REMOVED
depends on BUSYBOX_CONFIG_FEATURE_USE_INITTAB
help
- When respawn entries are removed from inittab and a SIGHUP is
- sent to init, this option will make init kill the processes
- that have been removed.
+ When respawn entries are removed from inittab and a SIGHUP is
+ sent to init, this option will make init kill the processes
+ that have been removed.
config BUSYBOX_CONFIG_FEATURE_KILL_DELAY
int "How long to wait between TERM and KILL (0 - send TERM only)" if FEATURE_KILL_REMOVED
default BUSYBOX_DEFAULT_FEATURE_KILL_DELAY
depends on BUSYBOX_CONFIG_FEATURE_KILL_REMOVED
help
- With nonzero setting, init sends TERM, forks, child waits N
- seconds, sends KILL and exits. Setting it too high is unwise
- (child will hang around for too long and could actually kill
- the wrong process!)
+ With nonzero setting, init sends TERM, forks, child waits N
+ seconds, sends KILL and exits. Setting it too high is unwise
+ (child will hang around for too long and could actually kill
+ the wrong process!)
config BUSYBOX_CONFIG_FEATURE_INIT_SCTTY
bool "Run commands with leading dash with controlling tty"
default BUSYBOX_DEFAULT_FEATURE_INIT_SCTTY
depends on BUSYBOX_CONFIG_INIT || BUSYBOX_CONFIG_LINUXRC
help
- If this option is enabled, init will try to give a controlling
- tty to any command which has leading hyphen (often it's "-/bin/sh").
- More precisely, init will do "ioctl(STDIN_FILENO, TIOCSCTTY, 0)".
- If device attached to STDIN_FILENO can be a ctty but is not yet
- a ctty for other session, it will become this process' ctty.
- This is not the traditional init behavour, but is often what you want
- in an embedded system where the console is only accessed during
- development or for maintenance.
- NB: using cttyhack applet may work better.
+ If this option is enabled, init will try to give a controlling
+ tty to any command which has leading hyphen (often it's "-/bin/sh").
+ More precisely, init will do "ioctl(STDIN_FILENO, TIOCSCTTY, 0)".
+ If device attached to STDIN_FILENO can be a ctty but is not yet
+ a ctty for other session, it will become this process' ctty.
+ This is not the traditional init behavour, but is often what you want
+ in an embedded system where the console is only accessed during
+ development or for maintenance.
+ NB: using cttyhack applet may work better.
config BUSYBOX_CONFIG_FEATURE_INIT_SYSLOG
bool "Enable init to write to syslog"
default BUSYBOX_DEFAULT_FEATURE_INIT_SYSLOG
depends on BUSYBOX_CONFIG_INIT || BUSYBOX_CONFIG_LINUXRC
help
- If selected, some init messages are sent to syslog.
- Otherwise, they are sent to VT #5 if linux virtual tty is detected
- (if not, no separate logging is done).
+ If selected, some init messages are sent to syslog.
+ Otherwise, they are sent to VT #5 if linux virtual tty is detected
+ (if not, no separate logging is done).
config BUSYBOX_CONFIG_FEATURE_INIT_QUIET
bool "Be quiet on boot (no 'init started:' message)"
default BUSYBOX_DEFAULT_FEATURE_INIT_COREDUMPS # not Y because this is a debug option
depends on BUSYBOX_CONFIG_INIT || BUSYBOX_CONFIG_LINUXRC
help
- If this option is enabled and the file /.init_enable_core
- exists, then init will call setrlimit() to allow unlimited
- core file sizes. If this option is disabled, processes
- will not generate any core files.
+ If this option is enabled and the file /.init_enable_core
+ exists, then init will call setrlimit() to allow unlimited
+ core file sizes. If this option is disabled, processes
+ will not generate any core files.
config BUSYBOX_CONFIG_INIT_TERMINAL_TYPE
string "Initial terminal type"
default BUSYBOX_DEFAULT_INIT_TERMINAL_TYPE
depends on BUSYBOX_CONFIG_INIT || BUSYBOX_CONFIG_LINUXRC
help
- This is the initial value set by init for the TERM environment
- variable. This variable is used by programs which make use of
- extended terminal capabilities.
+ This is the initial value set by init for the TERM environment
+ variable. This variable is used by programs which make use of
+ extended terminal capabilities.
- Note that on Linux, init attempts to detect serial terminal and
- sets TERM to "vt102" if one is found.
+ Note that on Linux, init attempts to detect serial terminal and
+ sets TERM to "vt102" if one is found.
config BUSYBOX_CONFIG_FEATURE_INIT_MODIFY_CMDLINE
bool "Clear init's command line"
default BUSYBOX_DEFAULT_FEATURE_INIT_MODIFY_CMDLINE
depends on BUSYBOX_CONFIG_INIT || BUSYBOX_CONFIG_LINUXRC
help
- When launched as PID 1 and after parsing its arguments, init
- wipes all the arguments but argv[0] and rewrites argv[0] to
- contain only "init", so that its command line appears solely as
- "init" in tools such as ps.
- If this option is set to Y, init will keep its original behavior,
- otherwise, all the arguments including argv[0] will be preserved,
- be they parsed or ignored by init.
- The original command-line used to launch init can then be
- retrieved in /proc/1/cmdline on Linux, for example.
+ When launched as PID 1 and after parsing its arguments, init
+ wipes all the arguments but argv[0] and rewrites argv[0] to
+ contain only "init", so that its command line appears solely as
+ "init" in tools such as ps.
+ If this option is set to Y, init will keep its original behavior,
+ otherwise, all the arguments including argv[0] will be preserved,
+ be they parsed or ignored by init.
+ The original command-line used to launch init can then be
+ retrieved in /proc/1/cmdline on Linux, for example.
endmenu
bool "Use the end of BSS page"
default BUSYBOX_DEFAULT_FEATURE_USE_BSS_TAIL
help
- Attempt to reclaim a small unused part of BSS.
-
- Executables have the following parts:
- = read-only executable code and constants, also known as "text"
- = read-write data
- = non-initialized (zeroed on demand) data, also known as "bss"
-
- At link time, "text" is padded to a full page. At runtime, all "text"
- pages are mapped RO and executable.
- "Data" starts on the next page boundary, but is not padded
- to a full page at the end. "Bss" starts wherever "data" ends.
- At runtime, "data" pages are mapped RW and they are file-backed
- (this includes a small portion of "bss" which may live in the last
- partial page of "data").
- Pages which are fully in "bss" are mapped to anonymous memory.
-
- "Bss" end is usually not page-aligned. There is an unused space
- in the last page. Linker marks its start with the "_end" symbol.
-
- This option will attempt to use that space for bb_common_bufsiz1[]
- array. If it fits after _end, it will be used, and COMMON_BUFSIZE
- will be enlarged from its guaranteed minimum size of 1 kbyte.
- This may require recompilation a second time, since value of _end
- is known only after final link.
-
- If you are getting a build error like this:
+ Attempt to reclaim a small unused part of BSS.
+
+ Executables have the following parts:
+ = read-only executable code and constants, also known as "text"
+ = read-write data
+ = non-initialized (zeroed on demand) data, also known as "bss"
+
+ At link time, "text" is padded to a full page. At runtime, all "text"
+ pages are mapped RO and executable.
+ "Data" starts on the next page boundary, but is not padded
+ to a full page at the end. "Bss" starts wherever "data" ends.
+ At runtime, "data" pages are mapped RW and they are file-backed
+ (this includes a small portion of "bss" which may live in the last
+ partial page of "data").
+ Pages which are fully in "bss" are mapped to anonymous memory.
+
+ "Bss" end is usually not page-aligned. There is an unused space
+ in the last page. Linker marks its start with the "_end" symbol.
+
+ This option will attempt to use that space for bb_common_bufsiz1[]
+ array. If it fits after _end, it will be used, and COMMON_BUFSIZE
+ will be enlarged from its guaranteed minimum size of 1 kbyte.
+ This may require recompilation a second time, since value of _end
+ is known only after final link.
+
+ If you are getting a build error like this:
appletlib.c:(.text.main+0xd): undefined reference to '_end'
- disable this option.
+ disable this option.
config BUSYBOX_CONFIG_FEATURE_RTMINMAX
bool "Support RTMIN[+n] and RTMAX[-n] signal names"
default BUSYBOX_DEFAULT_FEATURE_RTMINMAX
help
- Support RTMIN[+n] and RTMAX[-n] signal names
- in kill, killall etc. This costs ~250 bytes.
+ Support RTMIN[+n] and RTMAX[-n] signal names
+ in kill, killall etc. This costs ~250 bytes.
choice
prompt "Buffer allocation policy"
default BUSYBOX_CONFIG_FEATURE_BUFFERS_GO_ON_STACK
help
- There are 3 ways BusyBox can handle buffer allocations:
- - Use malloc. This costs code size for the call to xmalloc.
- - Put them on stack. For some very small machines with limited stack
+ There are 3 ways BusyBox can handle buffer allocations:
+ - Use malloc. This costs code size for the call to xmalloc.
+ - Put them on stack. For some very small machines with limited stack
space, this can be deadly. For most folks, this works just fine.
- - Put them in BSS. This works beautifully for computers with a real
+ - Put them in BSS. This works beautifully for computers with a real
MMU (and OS support), but wastes runtime RAM for uCLinux. This
behavior was the only one available for BusyBox versions 0.48 and
earlier.
default BUSYBOX_DEFAULT_PASSWORD_MINLEN
range 5 32
help
- Minimum allowable password length.
+ Minimum allowable password length.
config BUSYBOX_CONFIG_MD5_SMALL
int "MD5: Trade bytes for speed (0:fast, 3:slow)"
default BUSYBOX_DEFAULT_MD5_SMALL # all "fast or small" options default to small
range 0 3
help
- Trade binary size versus speed for the md5sum algorithm.
- Approximate values running uClibc and hashing
- linux-2.4.4.tar.bz2 were:
+ Trade binary size versus speed for the md5sum algorithm.
+ Approximate values running uClibc and hashing
+ linux-2.4.4.tar.bz2 were:
user times (sec) text size (386)
- 0 (fastest) 1.1 6144
- 1 1.4 5392
- 2 3.0 5088
- 3 (smallest) 5.1 4912
+ 0 (fastest) 1.1 6144
+ 1 1.4 5392
+ 2 3.0 5088
+ 3 (smallest) 5.1 4912
config BUSYBOX_CONFIG_SHA3_SMALL
int "SHA3: Trade bytes for speed (0:fast, 1:slow)"
default BUSYBOX_DEFAULT_SHA3_SMALL # all "fast or small" options default to small
range 0 1
help
- Trade binary size versus speed for the sha3sum algorithm.
- SHA3_SMALL=0 compared to SHA3_SMALL=1 (approximate):
- 64-bit x86: +270 bytes of code, 45% faster
- 32-bit x86: +450 bytes of code, 75% faster
+ Trade binary size versus speed for the sha3sum algorithm.
+ SHA3_SMALL=0 compared to SHA3_SMALL=1 (approximate):
+ 64-bit x86: +270 bytes of code, 45% faster
+ 32-bit x86: +450 bytes of code, 75% faster
config BUSYBOX_CONFIG_FEATURE_FAST_TOP
bool "Faster /proc scanning code (+100 bytes)"
default BUSYBOX_DEFAULT_FEATURE_FAST_TOP # all "fast or small" options default to small
help
- This option makes top (and ps) ~20% faster (or 20% less CPU hungry),
- but code size is slightly bigger.
+ This option makes top (and ps) ~20% faster (or 20% less CPU hungry),
+ but code size is slightly bigger.
config BUSYBOX_CONFIG_FEATURE_ETC_NETWORKS
bool "Support /etc/networks"
default BUSYBOX_DEFAULT_FEATURE_ETC_NETWORKS
help
- Enable support for network names in /etc/networks. This is
- a rarely used feature which allows you to use names
- instead of IP/mask pairs in route command.
+ Enable support for network names in /etc/networks. This is
+ a rarely used feature which allows you to use names
+ instead of IP/mask pairs in route command.
config BUSYBOX_CONFIG_FEATURE_EDITING
bool "Command line editing"
default BUSYBOX_DEFAULT_FEATURE_EDITING
help
- Enable line editing (mainly for shell command line).
+ Enable line editing (mainly for shell command line).
config BUSYBOX_CONFIG_FEATURE_EDITING_MAX_LEN
int "Maximum length of input"
default BUSYBOX_DEFAULT_FEATURE_EDITING_MAX_LEN
depends on BUSYBOX_CONFIG_FEATURE_EDITING
help
- Line editing code uses on-stack buffers for storage.
- You may want to decrease this parameter if your target machine
- benefits from smaller stack usage.
+ Line editing code uses on-stack buffers for storage.
+ You may want to decrease this parameter if your target machine
+ benefits from smaller stack usage.
config BUSYBOX_CONFIG_FEATURE_EDITING_VI
bool "vi-style line editing commands"
default BUSYBOX_DEFAULT_FEATURE_EDITING_VI
depends on BUSYBOX_CONFIG_FEATURE_EDITING
help
- Enable vi-style line editing. In shells, this mode can be
- turned on and off with "set -o vi" and "set +o vi".
+ Enable vi-style line editing. In shells, this mode can be
+ turned on and off with "set -o vi" and "set +o vi".
config BUSYBOX_CONFIG_FEATURE_EDITING_HISTORY
int "History size"
default BUSYBOX_DEFAULT_FEATURE_EDITING_HISTORY
depends on BUSYBOX_CONFIG_FEATURE_EDITING
help
- Specify command history size (0 - disable).
+ Specify command history size (0 - disable).
config BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
bool "History saving"
default BUSYBOX_DEFAULT_FEATURE_EDITING_SAVEHISTORY
depends on BUSYBOX_CONFIG_FEATURE_EDITING
help
- Enable history saving in shells.
+ Enable history saving in shells.
config BUSYBOX_CONFIG_FEATURE_EDITING_SAVE_ON_EXIT
bool "Save history on shell exit, not after every command"
default BUSYBOX_DEFAULT_FEATURE_EDITING_SAVE_ON_EXIT
depends on BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
help
- Save history on shell exit, not after every command.
+ Save history on shell exit, not after every command.
config BUSYBOX_CONFIG_FEATURE_REVERSE_SEARCH
bool "Reverse history search"
default BUSYBOX_DEFAULT_FEATURE_REVERSE_SEARCH
depends on BUSYBOX_CONFIG_FEATURE_EDITING
help
- Enable readline-like Ctrl-R combination for reverse history search.
- Increases code by about 0.5k.
+ Enable readline-like Ctrl-R combination for reverse history search.
+ Increases code by about 0.5k.
config BUSYBOX_CONFIG_FEATURE_TAB_COMPLETION
bool "Tab completion"
default BUSYBOX_DEFAULT_FEATURE_EDITING_FANCY_PROMPT
depends on BUSYBOX_CONFIG_FEATURE_EDITING
help
- Setting this option allows for prompts to use things like \w and
- \$ and escape codes.
+ Setting this option allows for prompts to use things like \w and
+ \$ and escape codes.
config BUSYBOX_CONFIG_FEATURE_EDITING_ASK_TERMINAL
bool "Query cursor position from terminal"
default BUSYBOX_DEFAULT_FEATURE_EDITING_ASK_TERMINAL
depends on BUSYBOX_CONFIG_FEATURE_EDITING
help
- Allow usage of "ESC [ 6 n" sequence. Terminal answers back with
- current cursor position. This information is used to make line
- editing more robust in some cases.
- If you are not sure whether your terminals respond to this code
- correctly, or want to save on code size (about 400 bytes),
- then do not turn this option on.
+ Allow usage of "ESC [ 6 n" sequence. Terminal answers back with
+ current cursor position. This information is used to make line
+ editing more robust in some cases.
+ If you are not sure whether your terminals respond to this code
+ correctly, or want to save on code size (about 400 bytes),
+ then do not turn this option on.
config BUSYBOX_CONFIG_LOCALE_SUPPORT
bool "Enable locale support (system needs locale for this to work)"
default BUSYBOX_DEFAULT_LOCALE_SUPPORT
help
- Enable this if your system has locale support and you would like
- busybox to support locale settings.
+ Enable this if your system has locale support and you would like
+ busybox to support locale settings.
config BUSYBOX_CONFIG_UNICODE_SUPPORT
bool "Support Unicode"
default BUSYBOX_DEFAULT_UNICODE_SUPPORT
help
- This makes various applets aware that one byte is not
- one character on screen.
+ This makes various applets aware that one byte is not
+ one character on screen.
- Busybox aims to eventually work correctly with Unicode displays.
- Any older encodings are not guaranteed to work.
- Probably by the time when busybox will be fully Unicode-clean,
- other encodings will be mainly of historic interest.
+ Busybox aims to eventually work correctly with Unicode displays.
+ Any older encodings are not guaranteed to work.
+ Probably by the time when busybox will be fully Unicode-clean,
+ other encodings will be mainly of historic interest.
config BUSYBOX_CONFIG_UNICODE_USING_LOCALE
bool "Use libc routines for Unicode (else uses internal ones)"
default BUSYBOX_DEFAULT_UNICODE_USING_LOCALE
depends on BUSYBOX_CONFIG_UNICODE_SUPPORT && BUSYBOX_CONFIG_LOCALE_SUPPORT
help
- With this option on, Unicode support is implemented using libc
- routines. Otherwise, internal implementation is used.
- Internal implementation is smaller.
+ With this option on, Unicode support is implemented using libc
+ routines. Otherwise, internal implementation is used.
+ Internal implementation is smaller.
config BUSYBOX_CONFIG_FEATURE_CHECK_UNICODE_IN_ENV
bool "Check $LC_ALL, $LC_CTYPE and $LANG environment variables"
default BUSYBOX_DEFAULT_FEATURE_CHECK_UNICODE_IN_ENV
depends on BUSYBOX_CONFIG_UNICODE_SUPPORT && !BUSYBOX_CONFIG_UNICODE_USING_LOCALE
help
- With this option on, Unicode support is activated
- only if locale-related variables have the value of the form
- "xxxx.utf8"
+ With this option on, Unicode support is activated
+ only if locale-related variables have the value of the form
+ "xxxx.utf8"
- Otherwise, Unicode support will be always enabled and active.
+ Otherwise, Unicode support will be always enabled and active.
config BUSYBOX_CONFIG_SUBST_WCHAR
int "Character code to substitute unprintable characters with"
depends on BUSYBOX_CONFIG_UNICODE_SUPPORT
default BUSYBOX_DEFAULT_SUBST_WCHAR
help
- Typical values are 63 for '?' (works with any output device),
- 30 for ASCII substitute control code,
- 65533 (0xfffd) for Unicode replacement character.
+ Typical values are 63 for '?' (works with any output device),
+ 30 for ASCII substitute control code,
+ 65533 (0xfffd) for Unicode replacement character.
config BUSYBOX_CONFIG_LAST_SUPPORTED_WCHAR
int "Range of supported Unicode characters"
depends on BUSYBOX_CONFIG_UNICODE_SUPPORT
default BUSYBOX_DEFAULT_LAST_SUPPORTED_WCHAR
help
- Any character with Unicode value bigger than this is assumed
- to be non-printable on output device. Many applets replace
- such characters with substitution character.
-
- The idea is that many valid printable Unicode chars
- nevertheless are not displayed correctly. Think about
- combining charachers, double-wide hieroglyphs, obscure
- characters in dozens of ancient scripts...
- Many terminals, terminal emulators, xterms etc will fail
- to handle them correctly. Choose the smallest value
- which suits your needs.
-
- Typical values are:
- 126 - ASCII only
- 767 (0x2ff) - there are no combining chars in [0..767] range
+ Any character with Unicode value bigger than this is assumed
+ to be non-printable on output device. Many applets replace
+ such characters with substitution character.
+
+ The idea is that many valid printable Unicode chars
+ nevertheless are not displayed correctly. Think about
+ combining charachers, double-wide hieroglyphs, obscure
+ characters in dozens of ancient scripts...
+ Many terminals, terminal emulators, xterms etc will fail
+ to handle them correctly. Choose the smallest value
+ which suits your needs.
+
+ Typical values are:
+ 126 - ASCII only
+ 767 (0x2ff) - there are no combining chars in [0..767] range
(the range includes Latin 1, Latin Ext. A and B),
code is ~700 bytes smaller for this case.
- 4351 (0x10ff) - there are no double-wide chars in [0..4351] range,
+ 4351 (0x10ff) - there are no double-wide chars in [0..4351] range,
code is ~300 bytes smaller for this case.
- 12799 (0x31ff) - nearly all non-ideographic characters are
+ 12799 (0x31ff) - nearly all non-ideographic characters are
available in [0..12799] range, including
East Asian scripts like katakana, hiragana, hangul,
bopomofo...
- 0 - off, any valid printable Unicode character will be printed.
+ 0 - off, any valid printable Unicode character will be printed.
config BUSYBOX_CONFIG_UNICODE_COMBINING_WCHARS
bool "Allow zero-width Unicode characters on output"
default BUSYBOX_DEFAULT_UNICODE_COMBINING_WCHARS
depends on BUSYBOX_CONFIG_UNICODE_SUPPORT
help
- With this option off, any Unicode char with width of 0
- is substituted on output.
+ With this option off, any Unicode char with width of 0
+ is substituted on output.
config BUSYBOX_CONFIG_UNICODE_WIDE_WCHARS
bool "Allow wide Unicode characters on output"
default BUSYBOX_DEFAULT_UNICODE_WIDE_WCHARS
depends on BUSYBOX_CONFIG_UNICODE_SUPPORT
help
- With this option off, any Unicode char with width > 1
- is substituted on output.
+ With this option off, any Unicode char with width > 1
+ is substituted on output.
config BUSYBOX_CONFIG_UNICODE_BIDI_SUPPORT
bool "Bidirectional character-aware line input"
default BUSYBOX_DEFAULT_UNICODE_BIDI_SUPPORT
depends on BUSYBOX_CONFIG_UNICODE_SUPPORT && !BUSYBOX_CONFIG_UNICODE_USING_LOCALE
help
- With this option on, right-to-left Unicode characters
- are treated differently on input (e.g. cursor movement).
+ With this option on, right-to-left Unicode characters
+ are treated differently on input (e.g. cursor movement).
config BUSYBOX_CONFIG_UNICODE_NEUTRAL_TABLE
bool "In bidi input, support non-ASCII neutral chars too"
default BUSYBOX_DEFAULT_UNICODE_NEUTRAL_TABLE
depends on BUSYBOX_CONFIG_UNICODE_BIDI_SUPPORT
help
- In most cases it's enough to treat only ASCII non-letters
- (i.e. punctuation, numbers and space) as characters
- with neutral directionality.
- With this option on, more extensive (and bigger) table
- of neutral chars will be used.
+ In most cases it's enough to treat only ASCII non-letters
+ (i.e. punctuation, numbers and space) as characters
+ with neutral directionality.
+ With this option on, more extensive (and bigger) table
+ of neutral chars will be used.
config BUSYBOX_CONFIG_UNICODE_PRESERVE_BROKEN
bool "Make it possible to enter sequences of chars which are not Unicode"
default BUSYBOX_DEFAULT_UNICODE_PRESERVE_BROKEN
depends on BUSYBOX_CONFIG_UNICODE_SUPPORT
help
- With this option on, on line-editing input (such as used by shells)
- invalid UTF-8 bytes are not substituted with the selected
- substitution character.
- For example, this means that entering 'l', 's', ' ', 0xff, [Enter]
- at shell prompt will list file named 0xff (single char name
- with char value 255), not file named '?'.
+ With this option on, on line-editing input (such as used by shells)
+ invalid UTF-8 bytes are not substituted with the selected
+ substitution character.
+ For example, this means that entering 'l', 's', ' ', 0xff, [Enter]
+ at shell prompt will list file named 0xff (single char name
+ with char value 255), not file named '?'.
config BUSYBOX_CONFIG_FEATURE_NON_POSIX_CP
bool "Non-POSIX, but safer, copying to special nodes"
default BUSYBOX_DEFAULT_FEATURE_NON_POSIX_CP
help
- With this option, "cp file symlink" will delete symlink
- and create a regular file. This does not conform to POSIX,
- but prevents a symlink attack.
- Similarly, "cp file device" will not send file's data
- to the device. (To do that, use "cat file >device")
+ With this option, "cp file symlink" will delete symlink
+ and create a regular file. This does not conform to POSIX,
+ but prevents a symlink attack.
+ Similarly, "cp file device" will not send file's data
+ to the device. (To do that, use "cat file >device")
config BUSYBOX_CONFIG_FEATURE_VERBOSE_CP_MESSAGE
bool "Give more precise messages when copy fails (cp, mv etc)"
default BUSYBOX_DEFAULT_FEATURE_VERBOSE_CP_MESSAGE
help
- Error messages with this feature enabled:
+ Error messages with this feature enabled:
$ cp file /does_not_exist/file
cp: cannot create '/does_not_exist/file': Path does not exist
$ cp file /vmlinuz/file
cp: cannot stat '/vmlinuz/file': Path has non-directory component
- If this feature is not enabled, they will be, respectively:
+ If this feature is not enabled, they will be, respectively:
cp: cannot create '/does_not_exist/file': No such file or directory
cp: cannot stat '/vmlinuz/file': Not a directory
- This will cost you ~60 bytes.
+ This will cost you ~60 bytes.
config BUSYBOX_CONFIG_FEATURE_USE_SENDFILE
bool "Use sendfile system call"
default BUSYBOX_DEFAULT_FEATURE_USE_SENDFILE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- When enabled, busybox will use the kernel sendfile() function
- instead of read/write loops to copy data between file descriptors
- (for example, cp command does this a lot).
- If sendfile() doesn't work, copying code falls back to read/write
- loop. sendfile() was originally implemented for faster I/O
- from files to sockets, but since Linux 2.6.33 it was extended
- to work for many more file types.
+ When enabled, busybox will use the kernel sendfile() function
+ instead of read/write loops to copy data between file descriptors
+ (for example, cp command does this a lot).
+ If sendfile() doesn't work, copying code falls back to read/write
+ loop. sendfile() was originally implemented for faster I/O
+ from files to sockets, but since Linux 2.6.33 it was extended
+ to work for many more file types.
config BUSYBOX_CONFIG_FEATURE_COPYBUF_KB
int "Copy buffer size, in kilobytes"
range 1 1024
default BUSYBOX_DEFAULT_FEATURE_COPYBUF_KB
help
- Size of buffer used by cp, mv, install, wget etc.
- Buffers which are 4 kb or less will be allocated on stack.
- Bigger buffers will be allocated with mmap, with fallback to 4 kb
- stack buffer if mmap fails.
+ Size of buffer used by cp, mv, install, wget etc.
+ Buffers which are 4 kb or less will be allocated on stack.
+ Bigger buffers will be allocated with mmap, with fallback to 4 kb
+ stack buffer if mmap fails.
config BUSYBOX_CONFIG_FEATURE_SKIP_ROOTFS
bool "Skip rootfs in mount table"
default BUSYBOX_DEFAULT_FEATURE_SKIP_ROOTFS
help
- Ignore rootfs entry in mount table.
+ Ignore rootfs entry in mount table.
- In Linux, kernel has a special filesystem, rootfs, which is initially
- mounted on /. It contains initramfs data, if kernel is configured
- to have one. Usually, another file system is mounted over / early
- in boot process, and therefore most tools which manipulate
- mount table, such as df, will skip rootfs entry.
+ In Linux, kernel has a special filesystem, rootfs, which is initially
+ mounted on /. It contains initramfs data, if kernel is configured
+ to have one. Usually, another file system is mounted over / early
+ in boot process, and therefore most tools which manipulate
+ mount table, such as df, will skip rootfs entry.
- However, some systems do not mount anything on /.
- If you need to configure busybox for one of these systems,
- you may find it useful to turn this option off to make df show
- initramfs statistics.
+ However, some systems do not mount anything on /.
+ If you need to configure busybox for one of these systems,
+ you may find it useful to turn this option off to make df show
+ initramfs statistics.
- Otherwise, choose Y.
+ Otherwise, choose Y.
config BUSYBOX_CONFIG_MONOTONIC_SYSCALL
bool "Use clock_gettime(CLOCK_MONOTONIC) syscall"
default BUSYBOX_DEFAULT_MONOTONIC_SYSCALL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
- time intervals (time, ping, traceroute etc need this).
- Probably requires Linux 2.6+. If not selected, gettimeofday
- will be used instead (which gives wrong results if date/time
- is reset).
+ Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
+ time intervals (time, ping, traceroute etc need this).
+ Probably requires Linux 2.6+. If not selected, gettimeofday
+ will be used instead (which gives wrong results if date/time
+ is reset).
config BUSYBOX_CONFIG_IOCTL_HEX2STR_ERROR
bool "Use ioctl names rather than hex values in error messages"
default BUSYBOX_DEFAULT_IOCTL_HEX2STR_ERROR
help
- Use ioctl names rather than hex values in error messages
- (e.g. VT_DISALLOCATE rather than 0x5608). If disabled this
- saves about 1400 bytes.
+ Use ioctl names rather than hex values in error messages
+ (e.g. VT_DISALLOCATE rather than 0x5608). If disabled this
+ saves about 1400 bytes.
config BUSYBOX_CONFIG_FEATURE_HWIB
bool "Support infiniband HW"
default BUSYBOX_DEFAULT_FEATURE_HWIB
help
- Support for printing infiniband addresses in
- network applets.
+ Support for printing infiniband addresses in
+ network applets.
endmenu
bool "Support shadow passwords"
default BUSYBOX_DEFAULT_FEATURE_SHADOWPASSWDS
help
- Build support for shadow password in /etc/shadow. This file is only
- readable by root and thus the encrypted passwords are no longer
- publicly readable.
+ Build support for shadow password in /etc/shadow. This file is only
+ readable by root and thus the encrypted passwords are no longer
+ publicly readable.
config BUSYBOX_CONFIG_USE_BB_PWD_GRP
bool "Use internal password and group functions rather than system functions"
default BUSYBOX_DEFAULT_USE_BB_PWD_GRP
help
- If you leave this disabled, busybox will use the system's password
- and group functions. And if you are using the GNU C library
- (glibc), you will then need to install the /etc/nsswitch.conf
- configuration file and the required /lib/libnss_* libraries in
- order for the password and group functions to work. This generally
- makes your embedded system quite a bit larger.
-
- Enabling this option will cause busybox to directly access the
- system's /etc/password, /etc/group files (and your system will be
- smaller, and I will get fewer emails asking about how glibc NSS
- works). When this option is enabled, you will not be able to use
- PAM to access remote LDAP password servers and whatnot. And if you
- want hostname resolution to work with glibc, you still need the
- /lib/libnss_* libraries.
-
- If you need to use glibc's nsswitch.conf mechanism
- (e.g. if user/group database is NOT stored in /etc/passwd etc),
- you must NOT use this option.
-
- If you enable this option, it will add about 1.5k.
+ If you leave this disabled, busybox will use the system's password
+ and group functions. And if you are using the GNU C library
+ (glibc), you will then need to install the /etc/nsswitch.conf
+ configuration file and the required /lib/libnss_* libraries in
+ order for the password and group functions to work. This generally
+ makes your embedded system quite a bit larger.
+
+ Enabling this option will cause busybox to directly access the
+ system's /etc/password, /etc/group files (and your system will be
+ smaller, and I will get fewer emails asking about how glibc NSS
+ works). When this option is enabled, you will not be able to use
+ PAM to access remote LDAP password servers and whatnot. And if you
+ want hostname resolution to work with glibc, you still need the
+ /lib/libnss_* libraries.
+
+ If you need to use glibc's nsswitch.conf mechanism
+ (e.g. if user/group database is NOT stored in /etc/passwd etc),
+ you must NOT use this option.
+
+ If you enable this option, it will add about 1.5k.
config BUSYBOX_CONFIG_USE_BB_SHADOW
bool "Use internal shadow password functions"
default BUSYBOX_DEFAULT_USE_BB_SHADOW
depends on BUSYBOX_CONFIG_USE_BB_PWD_GRP && BUSYBOX_CONFIG_FEATURE_SHADOWPASSWDS
help
- If you leave this disabled, busybox will use the system's shadow
- password handling functions. And if you are using the GNU C library
- (glibc), you will then need to install the /etc/nsswitch.conf
- configuration file and the required /lib/libnss_* libraries in
- order for the shadow password functions to work. This generally
- makes your embedded system quite a bit larger.
-
- Enabling this option will cause busybox to directly access the
- system's /etc/shadow file when handling shadow passwords. This
- makes your system smaller (and I will get fewer emails asking about
- how glibc NSS works). When this option is enabled, you will not be
- able to use PAM to access shadow passwords from remote LDAP
- password servers and whatnot.
+ If you leave this disabled, busybox will use the system's shadow
+ password handling functions. And if you are using the GNU C library
+ (glibc), you will then need to install the /etc/nsswitch.conf
+ configuration file and the required /lib/libnss_* libraries in
+ order for the shadow password functions to work. This generally
+ makes your embedded system quite a bit larger.
+
+ Enabling this option will cause busybox to directly access the
+ system's /etc/shadow file when handling shadow passwords. This
+ makes your system smaller (and I will get fewer emails asking about
+ how glibc NSS works). When this option is enabled, you will not be
+ able to use PAM to access shadow passwords from remote LDAP
+ password servers and whatnot.
config BUSYBOX_CONFIG_USE_BB_CRYPT
bool "Use internal crypt functions"
default BUSYBOX_DEFAULT_USE_BB_CRYPT
help
- Busybox has internal DES and MD5 crypt functions.
- They produce results which are identical to corresponding
- standard C library functions.
+ Busybox has internal DES and MD5 crypt functions.
+ They produce results which are identical to corresponding
+ standard C library functions.
- If you leave this disabled, busybox will use the system's
- crypt functions. Most C libraries use large (~70k)
- static buffers there, and also combine them with more general
- DES encryption/decryption.
+ If you leave this disabled, busybox will use the system's
+ crypt functions. Most C libraries use large (~70k)
+ static buffers there, and also combine them with more general
+ DES encryption/decryption.
- For busybox, having large static buffers is undesirable,
- especially on NOMMU machines. Busybox also doesn't need
- DES encryption/decryption and can do with smaller code.
+ For busybox, having large static buffers is undesirable,
+ especially on NOMMU machines. Busybox also doesn't need
+ DES encryption/decryption and can do with smaller code.
- If you enable this option, it will add about 4.8k of code
- if you are building dynamically linked executable.
- In static build, it makes code _smaller_ by about 1.2k,
- and likely many kilobytes less of bss.
+ If you enable this option, it will add about 4.8k of code
+ if you are building dynamically linked executable.
+ In static build, it makes code _smaller_ by about 1.2k,
+ and likely many kilobytes less of bss.
config BUSYBOX_CONFIG_USE_BB_CRYPT_SHA
bool "Enable SHA256/512 crypt functions"
default BUSYBOX_DEFAULT_USE_BB_CRYPT_SHA
depends on BUSYBOX_CONFIG_USE_BB_CRYPT
help
- Enable this if you have passwords starting with "$5$" or "$6$"
- in your /etc/passwd or /etc/shadow files. These passwords
- are hashed using SHA256 and SHA512 algorithms. Support for them
- was added to glibc in 2008.
- With this option off, login will fail password check for any
- user which has password encrypted with these algorithms.
+ Enable this if you have passwords starting with "$5$" or "$6$"
+ in your /etc/passwd or /etc/shadow files. These passwords
+ are hashed using SHA256 and SHA512 algorithms. Support for them
+ was added to glibc in 2008.
+ With this option off, login will fail password check for any
+ user which has password encrypted with these algorithms.
config BUSYBOX_CONFIG_ADD_SHELL
bool "add-shell"
bool "addgroup"
default BUSYBOX_DEFAULT_ADDGROUP
help
- Utility for creating a new group account.
+ Utility for creating a new group account.
config BUSYBOX_CONFIG_FEATURE_ADDGROUP_LONG_OPTIONS
bool "Enable long options"
default BUSYBOX_DEFAULT_FEATURE_ADDUSER_TO_GROUP
depends on BUSYBOX_CONFIG_ADDGROUP
help
- If called with two non-option arguments,
- addgroup will add an existing user to an
- existing group.
+ If called with two non-option arguments,
+ addgroup will add an existing user to an
+ existing group.
config BUSYBOX_CONFIG_ADDUSER
bool "adduser"
default BUSYBOX_DEFAULT_ADDUSER
help
- Utility for creating a new user account.
+ Utility for creating a new user account.
config BUSYBOX_CONFIG_FEATURE_ADDUSER_LONG_OPTIONS
bool "Enable long options"
default BUSYBOX_DEFAULT_FEATURE_CHECK_NAMES
depends on BUSYBOX_CONFIG_ADDUSER || BUSYBOX_CONFIG_ADDGROUP
help
- Enable sanity check on user and group names in adduser and addgroup.
- To avoid problems, the user or group name should consist only of
- letters, digits, underscores, periods, at signs and dashes,
- and not start with a dash (as defined by IEEE Std 1003.1-2001).
- For compatibility with Samba machine accounts "$" is also supported
- at the end of the user or group name.
+ Enable sanity check on user and group names in adduser and addgroup.
+ To avoid problems, the user or group name should consist only of
+ letters, digits, underscores, periods, at signs and dashes,
+ and not start with a dash (as defined by IEEE Std 1003.1-2001).
+ For compatibility with Samba machine accounts "$" is also supported
+ at the end of the user or group name.
config BUSYBOX_CONFIG_LAST_ID
int "Last valid uid or gid for adduser and addgroup"
depends on BUSYBOX_CONFIG_ADDUSER || BUSYBOX_CONFIG_ADDGROUP
default BUSYBOX_DEFAULT_LAST_ID
help
- Last valid uid or gid for adduser and addgroup
+ Last valid uid or gid for adduser and addgroup
config BUSYBOX_CONFIG_FIRST_SYSTEM_ID
int "First valid system uid or gid for adduser and addgroup"
range 0 BUSYBOX_CONFIG_LAST_ID
default BUSYBOX_DEFAULT_FIRST_SYSTEM_ID
help
- First valid system uid or gid for adduser and addgroup
+ First valid system uid or gid for adduser and addgroup
config BUSYBOX_CONFIG_LAST_SYSTEM_ID
int "Last valid system uid or gid for adduser and addgroup"
range BUSYBOX_CONFIG_FIRST_SYSTEM_ID BUSYBOX_CONFIG_LAST_ID
default BUSYBOX_DEFAULT_LAST_SYSTEM_ID
help
- Last valid system uid or gid for adduser and addgroup
+ Last valid system uid or gid for adduser and addgroup
config BUSYBOX_CONFIG_CHPASSWD
bool "chpasswd"
default BUSYBOX_DEFAULT_CHPASSWD
help
- Reads a file of user name and password pairs from standard input
- and uses this information to update a group of existing users.
+ Reads a file of user name and password pairs from standard input
+ and uses this information to update a group of existing users.
config BUSYBOX_CONFIG_FEATURE_DEFAULT_PASSWD_ALGO
string "Default encryption method (passwd -a, cryptpw -m, chpasswd -c ALG)"
default BUSYBOX_DEFAULT_FEATURE_DEFAULT_PASSWD_ALGO
depends on BUSYBOX_CONFIG_PASSWD || BUSYBOX_CONFIG_CRYPTPW || BUSYBOX_CONFIG_CHPASSWD
help
- Possible choices are "d[es]", "m[d5]", "s[ha256]" or "sha512".
+ Possible choices are "d[es]", "m[d5]", "s[ha256]" or "sha512".
config BUSYBOX_CONFIG_CRYPTPW
bool "cryptpw"
default BUSYBOX_DEFAULT_CRYPTPW
help
- Encrypts the given password with the crypt(3) libc function
- using the given salt.
+ Encrypts the given password with the crypt(3) libc function
+ using the given salt.
config BUSYBOX_CONFIG_MKPASSWD
bool "mkpasswd"
default BUSYBOX_DEFAULT_MKPASSWD
help
- Encrypts the given password with the crypt(3) libc function
- using the given salt. Debian has this utility under mkpasswd
- name. Busybox provides mkpasswd as an alias for cryptpw.
+ Encrypts the given password with the crypt(3) libc function
+ using the given salt. Debian has this utility under mkpasswd
+ name. Busybox provides mkpasswd as an alias for cryptpw.
config BUSYBOX_CONFIG_DELUSER
bool "deluser"
default BUSYBOX_DEFAULT_DELUSER
help
- Utility for deleting a user account.
+ Utility for deleting a user account.
config BUSYBOX_CONFIG_DELGROUP
bool "delgroup"
default BUSYBOX_DEFAULT_DELGROUP
help
- Utility for deleting a group account.
+ Utility for deleting a group account.
config BUSYBOX_CONFIG_FEATURE_DEL_USER_FROM_GROUP
bool "Support removing users from groups"
default BUSYBOX_DEFAULT_FEATURE_DEL_USER_FROM_GROUP
depends on BUSYBOX_CONFIG_DELGROUP
help
- If called with two non-option arguments, deluser
- or delgroup will remove an user from a specified group.
+ If called with two non-option arguments, deluser
+ or delgroup will remove an user from a specified group.
config BUSYBOX_CONFIG_GETTY
bool "getty"
default BUSYBOX_DEFAULT_GETTY
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
- getty lets you log in on a tty. It is normally invoked by init.
-
- Note that you can save a few bytes by disabling it and
- using login applet directly.
- If you need to reset tty attributes before calling login,
- this script approximates getty:
-
- exec </dev/$1 >/dev/$1 2>&1 || exit 1
- reset
- stty sane; stty ispeed 38400; stty ospeed 38400
- printf "%s login: " "`hostname`"
- read -r login
- exec /bin/login "$login"
+ getty lets you log in on a tty. It is normally invoked by init.
+
+ Note that you can save a few bytes by disabling it and
+ using login applet directly.
+ If you need to reset tty attributes before calling login,
+ this script approximates getty:
+
+ exec </dev/$1 >/dev/$1 2>&1 || exit 1
+ reset
+ stty sane; stty ispeed 38400; stty ospeed 38400
+ printf "%s login: " "`hostname`"
+ read -r login
+ exec /bin/login "$login"
config BUSYBOX_CONFIG_LOGIN
bool "login"
default BUSYBOX_DEFAULT_LOGIN
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
- login is used when signing onto a system.
+ login is used when signing onto a system.
- Note that Busybox binary must be setuid root for this applet to
- work properly.
+ Note that Busybox binary must be setuid root for this applet to
+ work properly.
config BUSYBOX_CONFIG_LOGIN_SESSION_AS_CHILD
bool "Run logged in session in a child process"
default BUSYBOX_DEFAULT_LOGIN_SESSION_AS_CHILD if BUSYBOX_CONFIG_PAM
depends on BUSYBOX_CONFIG_LOGIN
help
- Run the logged in session in a child process. This allows
- login to clean up things such as utmp entries or PAM sessions
- when the login session is complete. If you use PAM, you
- almost always would want this to be set to Y, else PAM session
- will not be cleaned up.
+ Run the logged in session in a child process. This allows
+ login to clean up things such as utmp entries or PAM sessions
+ when the login session is complete. If you use PAM, you
+ almost always would want this to be set to Y, else PAM session
+ will not be cleaned up.
config BUSYBOX_CONFIG_LOGIN_SCRIPTS
bool "Support login scripts"
depends on BUSYBOX_CONFIG_LOGIN
default BUSYBOX_DEFAULT_LOGIN_SCRIPTS
help
- Enable this if you want login to execute $LOGIN_PRE_SUID_SCRIPT
- just prior to switching from root to logged-in user.
+ Enable this if you want login to execute $LOGIN_PRE_SUID_SCRIPT
+ just prior to switching from root to logged-in user.
config BUSYBOX_CONFIG_FEATURE_NOLOGIN
bool "Support /etc/nologin"
default BUSYBOX_DEFAULT_FEATURE_NOLOGIN
depends on BUSYBOX_CONFIG_LOGIN
help
- The file /etc/nologin is used by (some versions of) login(1).
- If it exists, non-root logins are prohibited.
+ The file /etc/nologin is used by (some versions of) login(1).
+ If it exists, non-root logins are prohibited.
config BUSYBOX_CONFIG_FEATURE_SECURETTY
bool "Support /etc/securetty"
default BUSYBOX_DEFAULT_FEATURE_SECURETTY
depends on BUSYBOX_CONFIG_LOGIN
help
- The file /etc/securetty is used by (some versions of) login(1).
- The file contains the device names of tty lines (one per line,
- without leading /dev/) on which root is allowed to login.
+ The file /etc/securetty is used by (some versions of) login(1).
+ The file contains the device names of tty lines (one per line,
+ without leading /dev/) on which root is allowed to login.
config BUSYBOX_CONFIG_PASSWD
bool "passwd"
default BUSYBOX_DEFAULT_PASSWD
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
- passwd changes passwords for user and group accounts. A normal user
- may only change the password for his/her own account, the super user
- may change the password for any account. The administrator of a group
- may change the password for the group.
+ passwd changes passwords for user and group accounts. A normal user
+ may only change the password for his/her own account, the super user
+ may change the password for any account. The administrator of a group
+ may change the password for the group.
- Note that Busybox binary must be setuid root for this applet to
- work properly.
+ Note that Busybox binary must be setuid root for this applet to
+ work properly.
config BUSYBOX_CONFIG_FEATURE_PASSWD_WEAK_CHECK
bool "Check new passwords for weakness"
default BUSYBOX_DEFAULT_FEATURE_PASSWD_WEAK_CHECK
depends on BUSYBOX_CONFIG_PASSWD
help
- With this option passwd will refuse new passwords which are "weak".
+ With this option passwd will refuse new passwords which are "weak".
config BUSYBOX_CONFIG_SU
bool "su"
default BUSYBOX_DEFAULT_SU
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
- su is used to become another user during a login session.
- Invoked without a username, su defaults to becoming the super user.
- Note that busybox binary must be setuid root for this applet to
- work properly.
+ su is used to become another user during a login session.
+ Invoked without a username, su defaults to becoming the super user.
+ Note that busybox binary must be setuid root for this applet to
+ work properly.
config BUSYBOX_CONFIG_FEATURE_SU_SYSLOG
bool "Log to syslog all attempts to use su"
default BUSYBOX_DEFAULT_SULOGIN
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
- sulogin is invoked when the system goes into single user
- mode (this is done through an entry in inittab).
+ sulogin is invoked when the system goes into single user
+ mode (this is done through an entry in inittab).
config BUSYBOX_CONFIG_VLOCK
bool "vlock"
default BUSYBOX_DEFAULT_VLOCK
help
- Build the "vlock" applet which allows you to lock (virtual) terminals.
+ Build the "vlock" applet which allows you to lock (virtual) terminals.
- Note that Busybox binary must be setuid root for this applet to
- work properly.
+ Note that Busybox binary must be setuid root for this applet to
+ work properly.
endmenu
bool "makemime"
default BUSYBOX_DEFAULT_MAKEMIME
help
- Create MIME-formatted messages.
+ Create MIME-formatted messages.
config BUSYBOX_CONFIG_POPMAILDIR
bool "popmaildir"
default BUSYBOX_DEFAULT_POPMAILDIR
help
- Simple yet powerful POP3 mail popper. Delivers content
- of remote mailboxes to local Maildir.
+ Simple yet powerful POP3 mail popper. Delivers content
+ of remote mailboxes to local Maildir.
config BUSYBOX_CONFIG_FEATURE_POPMAILDIR_DELIVERY
bool "Allow message filters and custom delivery program"
default BUSYBOX_DEFAULT_FEATURE_POPMAILDIR_DELIVERY
depends on BUSYBOX_CONFIG_POPMAILDIR
help
- Allow to use a custom program to filter the content
- of the message before actual delivery (-F "prog [args...]").
- Allow to use a custom program for message actual delivery
- (-M "prog [args...]").
+ Allow to use a custom program to filter the content
+ of the message before actual delivery (-F "prog [args...]").
+ Allow to use a custom program for message actual delivery
+ (-M "prog [args...]").
config BUSYBOX_CONFIG_REFORMIME
bool "reformime"
default BUSYBOX_DEFAULT_REFORMIME
help
- Parse MIME-formatted messages.
+ Parse MIME-formatted messages.
config BUSYBOX_CONFIG_FEATURE_REFORMIME_COMPAT
bool "Accept and ignore options other than -x and -X"
default BUSYBOX_DEFAULT_FEATURE_REFORMIME_COMPAT
depends on BUSYBOX_CONFIG_REFORMIME
help
- Accept (for compatibility only) and ignore options
- other than -x and -X.
+ Accept (for compatibility only) and ignore options
+ other than -x and -X.
config BUSYBOX_CONFIG_SENDMAIL
bool "sendmail"
default BUSYBOX_DEFAULT_SENDMAIL
help
- Barebones sendmail.
+ Barebones sendmail.
config BUSYBOX_CONFIG_FEATURE_MIME_CHARSET
string "Default charset"
default BUSYBOX_DEFAULT_FEATURE_MIME_CHARSET
depends on BUSYBOX_CONFIG_MAKEMIME || BUSYBOX_CONFIG_REFORMIME || BUSYBOX_CONFIG_SENDMAIL
help
- Default charset of the message.
+ Default charset of the message.
endmenu
default BUSYBOX_DEFAULT_ADJTIMEX
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Adjtimex reads and optionally sets adjustment parameters for
- the Linux clock adjustment algorithm.
+ Adjtimex reads and optionally sets adjustment parameters for
+ the Linux clock adjustment algorithm.
config BUSYBOX_CONFIG_BBCONFIG
bool "bbconfig"
default BUSYBOX_DEFAULT_BBCONFIG
help
- The bbconfig applet will print the config file with which
- busybox was built.
+ The bbconfig applet will print the config file with which
+ busybox was built.
config BUSYBOX_CONFIG_FEATURE_COMPRESS_BBCONFIG
bool "Compress bbconfig data"
default BUSYBOX_DEFAULT_FEATURE_COMPRESS_BBCONFIG
depends on BUSYBOX_CONFIG_BBCONFIG
help
- Store bbconfig data in compressed form, uncompress them on-the-fly
- before output.
+ Store bbconfig data in compressed form, uncompress them on-the-fly
+ before output.
- If you have a really tiny busybox with few applets enabled (and
- bunzip2 isn't one of them), the overhead of the decompressor might
- be noticeable. Also, if you run executables directly from ROM
- and have very little memory, this might not be a win. Otherwise,
- you probably want this.
+ If you have a really tiny busybox with few applets enabled (and
+ bunzip2 isn't one of them), the overhead of the decompressor might
+ be noticeable. Also, if you run executables directly from ROM
+ and have very little memory, this might not be a win. Otherwise,
+ you probably want this.
config BUSYBOX_CONFIG_BEEP
bool "beep"
default BUSYBOX_DEFAULT_BEEP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- The beep applets beeps in a given freq/Hz.
+ The beep applets beeps in a given freq/Hz.
config BUSYBOX_CONFIG_FEATURE_BEEP_FREQ
int "default frequency"
default BUSYBOX_DEFAULT_FEATURE_BEEP_FREQ
depends on BUSYBOX_CONFIG_BEEP
help
- Frequency for default beep.
+ Frequency for default beep.
config BUSYBOX_CONFIG_FEATURE_BEEP_LENGTH_MS
int "default length"
default BUSYBOX_DEFAULT_FEATURE_BEEP_LENGTH_MS
depends on BUSYBOX_CONFIG_BEEP
help
- Length in ms for default beep.
+ Length in ms for default beep.
config BUSYBOX_CONFIG_CHAT
bool "chat"
default BUSYBOX_DEFAULT_CHAT
help
- Simple chat utility.
+ Simple chat utility.
config BUSYBOX_CONFIG_FEATURE_CHAT_NOFAIL
bool "Enable NOFAIL expect strings"
depends on BUSYBOX_CONFIG_CHAT
default BUSYBOX_DEFAULT_FEATURE_CHAT_NOFAIL
help
- When enabled expect strings which are started with a dash trigger
- no-fail mode. That is when expectation is not met within timeout
- the script is not terminated but sends next SEND string and waits
- for next EXPECT string. This allows to compose far more flexible
- scripts.
+ When enabled expect strings which are started with a dash trigger
+ no-fail mode. That is when expectation is not met within timeout
+ the script is not terminated but sends next SEND string and waits
+ for next EXPECT string. This allows to compose far more flexible
+ scripts.
config BUSYBOX_CONFIG_FEATURE_CHAT_TTY_HIFI
bool "Force STDIN to be a TTY"
depends on BUSYBOX_CONFIG_CHAT
default BUSYBOX_DEFAULT_FEATURE_CHAT_TTY_HIFI
help
- Original chat always treats STDIN as a TTY device and sets for it
- so-called raw mode. This option turns on such behaviour.
+ Original chat always treats STDIN as a TTY device and sets for it
+ so-called raw mode. This option turns on such behaviour.
config BUSYBOX_CONFIG_FEATURE_CHAT_IMPLICIT_CR
bool "Enable implicit Carriage Return"
depends on BUSYBOX_CONFIG_CHAT
default BUSYBOX_DEFAULT_FEATURE_CHAT_IMPLICIT_CR
help
- When enabled make chat to terminate all SEND strings with a "\r"
- unless "\c" is met anywhere in the string.
+ When enabled make chat to terminate all SEND strings with a "\r"
+ unless "\c" is met anywhere in the string.
config BUSYBOX_CONFIG_FEATURE_CHAT_SWALLOW_OPTS
bool "Swallow options"
depends on BUSYBOX_CONFIG_CHAT
default BUSYBOX_DEFAULT_FEATURE_CHAT_SWALLOW_OPTS
help
- Busybox chat require no options. To make it not fail when used
- in place of original chat (which has a bunch of options) turn
- this on.
+ Busybox chat require no options. To make it not fail when used
+ in place of original chat (which has a bunch of options) turn
+ this on.
config BUSYBOX_CONFIG_FEATURE_CHAT_SEND_ESCAPES
bool "Support weird SEND escapes"
depends on BUSYBOX_CONFIG_CHAT
default BUSYBOX_DEFAULT_FEATURE_CHAT_SEND_ESCAPES
help
- Original chat uses some escape sequences in SEND arguments which
- are not sent to device but rather performs special actions.
- E.g. "\K" means to send a break sequence to device.
- "\d" delays execution for a second, "\p" -- for a 1/100 of second.
- Before turning this option on think twice: do you really need them?
+ Original chat uses some escape sequences in SEND arguments which
+ are not sent to device but rather performs special actions.
+ E.g. "\K" means to send a break sequence to device.
+ "\d" delays execution for a second, "\p" -- for a 1/100 of second.
+ Before turning this option on think twice: do you really need them?
config BUSYBOX_CONFIG_FEATURE_CHAT_VAR_ABORT_LEN
bool "Support variable-length ABORT conditions"
depends on BUSYBOX_CONFIG_CHAT
default BUSYBOX_DEFAULT_FEATURE_CHAT_VAR_ABORT_LEN
help
- Original chat uses fixed 50-bytes length ABORT conditions. Say N here.
+ Original chat uses fixed 50-bytes length ABORT conditions. Say N here.
config BUSYBOX_CONFIG_FEATURE_CHAT_CLR_ABORT
bool "Support revoking of ABORT conditions"
depends on BUSYBOX_CONFIG_CHAT
default BUSYBOX_DEFAULT_FEATURE_CHAT_CLR_ABORT
help
- Support CLR_ABORT directive.
+ Support CLR_ABORT directive.
config BUSYBOX_CONFIG_CONSPY
bool "conspy"
default BUSYBOX_DEFAULT_CONSPY
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- A text-mode VNC like program for Linux virtual terminals.
- example: conspy NUM shared access to console num
- or conspy -nd NUM screenshot of console num
- or conspy -cs NUM poor man's GNU screen like
+ A text-mode VNC like program for Linux virtual terminals.
+ example: conspy NUM shared access to console num
+ or conspy -nd NUM screenshot of console num
+ or conspy -cs NUM poor man's GNU screen like
config BUSYBOX_CONFIG_CROND
bool "crond"
default BUSYBOX_DEFAULT_CROND
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
- Crond is a background daemon that parses individual crontab
- files and executes commands on behalf of the users in question.
- This is a port of dcron from slackware. It uses files of the
- format /var/spool/cron/crontabs/<username> files, for example:
+ Crond is a background daemon that parses individual crontab
+ files and executes commands on behalf of the users in question.
+ This is a port of dcron from slackware. It uses files of the
+ format /var/spool/cron/crontabs/<username> files, for example:
$ cat /var/spool/cron/crontabs/root
# Run daily cron jobs at 4:40 every day:
40 4 * * * /etc/cron/daily > /dev/null 2>&1
depends on BUSYBOX_CONFIG_CROND
default BUSYBOX_DEFAULT_FEATURE_CROND_D
help
- -d N sets loglevel (0:most verbose) and directs all output to stderr.
+ -d N sets loglevel (0:most verbose) and directs all output to stderr.
config BUSYBOX_CONFIG_FEATURE_CROND_CALL_SENDMAIL
bool "Report command output via email (using sendmail)"
default BUSYBOX_DEFAULT_FEATURE_CROND_CALL_SENDMAIL
depends on BUSYBOX_CONFIG_CROND
help
- Command output will be sent to corresponding user via email.
+ Command output will be sent to corresponding user via email.
config BUSYBOX_CONFIG_FEATURE_CROND_DIR
string "crond spool directory"
default BUSYBOX_DEFAULT_FEATURE_CROND_DIR
depends on BUSYBOX_CONFIG_CROND || BUSYBOX_CONFIG_CRONTAB
help
- Location of crond spool.
+ Location of crond spool.
config BUSYBOX_CONFIG_CRONTAB
bool "crontab"
default BUSYBOX_DEFAULT_CRONTAB
help
- Crontab manipulates the crontab for a particular user. Only
- the superuser may specify a different user and/or crontab directory.
- Note that Busybox binary must be setuid root for this applet to
- work properly.
+ Crontab manipulates the crontab for a particular user. Only
+ the superuser may specify a different user and/or crontab directory.
+ Note that Busybox binary must be setuid root for this applet to
+ work properly.
config BUSYBOX_CONFIG_DC
bool "dc"
default BUSYBOX_DEFAULT_DC
help
- Dc is a reverse-polish desk calculator which supports unlimited
- precision arithmetic.
+ Dc is a reverse-polish desk calculator which supports unlimited
+ precision arithmetic.
config BUSYBOX_CONFIG_FEATURE_DC_LIBM
bool "Enable power and exp functions (requires libm)"
default BUSYBOX_DEFAULT_FEATURE_DC_LIBM
depends on BUSYBOX_CONFIG_DC
help
- Enable power and exp functions.
- NOTE: This will require libm to be present for linking.
+ Enable power and exp functions.
+ NOTE: This will require libm to be present for linking.
config BUSYBOX_CONFIG_DEVFSD
bool "devfsd (obsolete)"
default BUSYBOX_DEFAULT_DEVFSD
select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
- This is deprecated and should NOT be used anymore.
- Use linux >= 2.6 (optionally with hotplug) and mdev instead!
- See docs/mdev.txt for detailed instructions on how to use mdev
- instead.
+ This is deprecated and should NOT be used anymore.
+ Use linux >= 2.6 (optionally with hotplug) and mdev instead!
+ See docs/mdev.txt for detailed instructions on how to use mdev
+ instead.
- Provides compatibility with old device names on a devfs systems.
- You should set it to true if you have devfs enabled.
- The following keywords in devsfd.conf are supported:
- "CLEAR_CONFIG", "INCLUDE", "OPTIONAL_INCLUDE", "RESTORE",
- "PERMISSIONS", "EXECUTE", "COPY", "IGNORE",
- "MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT".
+ Provides compatibility with old device names on a devfs systems.
+ You should set it to true if you have devfs enabled.
+ The following keywords in devsfd.conf are supported:
+ "CLEAR_CONFIG", "INCLUDE", "OPTIONAL_INCLUDE", "RESTORE",
+ "PERMISSIONS", "EXECUTE", "COPY", "IGNORE",
+ "MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT".
- But only if they are written UPPERCASE!!!!!!!!
+ But only if they are written UPPERCASE!!!!!!!!
config BUSYBOX_CONFIG_DEVFSD_MODLOAD
bool "Adds support for MODLOAD keyword in devsfd.conf"
default BUSYBOX_DEFAULT_DEVFSD_MODLOAD
depends on BUSYBOX_CONFIG_DEVFSD
help
- This actually doesn't work with busybox modutils but needs
- the external modutils.
+ This actually doesn't work with busybox modutils but needs
+ the external modutils.
config BUSYBOX_CONFIG_DEVFSD_FG_NP
bool "Enable the -fg and -np options"
default BUSYBOX_DEFAULT_DEVFSD_FG_NP
depends on BUSYBOX_CONFIG_DEVFSD
help
- -fg Run the daemon in the foreground.
- -np Exit after parsing the configuration file.
+ -fg Run the daemon in the foreground.
+ -np Exit after parsing the configuration file.
Do not poll for events.
config BUSYBOX_CONFIG_DEVFSD_VERBOSE
default BUSYBOX_DEFAULT_DEVFSD_VERBOSE
depends on BUSYBOX_CONFIG_DEVFSD
help
- Increases logging to stderr or syslog.
+ Increases logging to stderr or syslog.
config BUSYBOX_CONFIG_FEATURE_DEVFS
bool "Use devfs names for all devices (obsolete)"
default BUSYBOX_DEFAULT_FEATURE_DEVFS
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- This is obsolete and should NOT be used anymore.
- Use linux >= 2.6 (optionally with hotplug) and mdev instead!
+ This is obsolete and should NOT be used anymore.
+ Use linux >= 2.6 (optionally with hotplug) and mdev instead!
- For legacy systems -- if there is no way around devfsd -- this
- tells busybox to look for names like /dev/loop/0 instead of
- /dev/loop0. If your /dev directory has normal names instead of
- devfs names, you don't want this.
+ For legacy systems -- if there is no way around devfsd -- this
+ tells busybox to look for names like /dev/loop/0 instead of
+ /dev/loop0. If your /dev directory has normal names instead of
+ devfs names, you don't want this.
config BUSYBOX_CONFIG_DEVMEM
bool "devmem"
default BUSYBOX_DEFAULT_DEVMEM
help
- devmem is a small program that reads and writes from physical
- memory using /dev/mem.
+ devmem is a small program that reads and writes from physical
+ memory using /dev/mem.
config BUSYBOX_CONFIG_FBSPLASH
bool "fbsplash"
default BUSYBOX_DEFAULT_FBSPLASH
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Shows splash image and progress bar on framebuffer device.
- Can be used during boot phase of an embedded device. ~2kb.
- Usage:
- - use kernel option 'vga=xxx' or otherwise enable fb device.
- - put somewhere fbsplash.cfg file and an image in .ppm format.
- - $ setsid fbsplash [params] &
+ Shows splash image and progress bar on framebuffer device.
+ Can be used during boot phase of an embedded device. ~2kb.
+ Usage:
+ - use kernel option 'vga=xxx' or otherwise enable fb device.
+ - put somewhere fbsplash.cfg file and an image in .ppm format.
+ - $ setsid fbsplash [params] &
-c: hide cursor
-d /dev/fbN: framebuffer device (if not /dev/fb0)
-s path_to_image_file (can be "-" for stdin)
-i path_to_cfg_file (can be "-" for stdin)
-f path_to_fifo (can be "-" for stdin)
- - if you want to run it only in presence of kernel parameter:
+ - if you want to run it only in presence of kernel parameter:
grep -q "fbsplash=on" </proc/cmdline && setsid fbsplash [params] &
- - commands for fifo:
+ - commands for fifo:
"NN" (ASCII decimal number) - percentage to show on progress bar
"exit" - well you guessed it
config BUSYBOX_CONFIG_FLASH_ERASEALL
bool "flash_eraseall"
default BUSYBOX_DEFAULT_FLASH_ERASEALL # doesn't build on Ubuntu 8.04
help
- The flash_eraseall binary from mtd-utils as of git head c4c6a59eb.
- This utility is used to erase the whole MTD device.
+ The flash_eraseall binary from mtd-utils as of git head c4c6a59eb.
+ This utility is used to erase the whole MTD device.
config BUSYBOX_CONFIG_FLASH_LOCK
bool "flash_lock"
default BUSYBOX_DEFAULT_FLASH_LOCK # doesn't build on Ubuntu 8.04
help
- The flash_lock binary from mtd-utils as of git head 5ec0c10d0. This
- utility locks part or all of the flash device.
+ The flash_lock binary from mtd-utils as of git head 5ec0c10d0. This
+ utility locks part or all of the flash device.
config BUSYBOX_CONFIG_FLASH_UNLOCK
bool "flash_unlock"
default BUSYBOX_DEFAULT_FLASH_UNLOCK # doesn't build on Ubuntu 8.04
help
- The flash_unlock binary from mtd-utils as of git head 5ec0c10d0. This
- utility unlocks part or all of the flash device.
+ The flash_unlock binary from mtd-utils as of git head 5ec0c10d0. This
+ utility unlocks part or all of the flash device.
config BUSYBOX_CONFIG_FLASHCP
bool "flashcp"
default BUSYBOX_DEFAULT_FLASHCP # doesn't build on Ubuntu 8.04
help
- The flashcp binary, inspired by mtd-utils as of git head 5eceb74f7.
- This utility is used to copy images into a MTD device.
+ The flashcp binary, inspired by mtd-utils as of git head 5eceb74f7.
+ This utility is used to copy images into a MTD device.
config BUSYBOX_CONFIG_HDPARM
bool "hdparm"
default BUSYBOX_DEFAULT_HDPARM
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Get/Set hard drive parameters. Primarily intended for ATA
- drives. Adds about 13k (or around 30k if you enable the
- FEATURE_HDPARM_GET_IDENTITY option)....
+ Get/Set hard drive parameters. Primarily intended for ATA
+ drives. Adds about 13k (or around 30k if you enable the
+ FEATURE_HDPARM_GET_IDENTITY option)....
config BUSYBOX_CONFIG_FEATURE_HDPARM_GET_IDENTITY
bool "Support obtaining detailed information directly from drives"
default BUSYBOX_DEFAULT_FEATURE_HDPARM_GET_IDENTITY
depends on BUSYBOX_CONFIG_HDPARM
help
- Enable the -I and -i options to obtain detailed information
- directly from drives about their capabilities and supported ATA
- feature set. If no device name is specified, hdparm will read
- identify data from stdin. Enabling this option will add about 16k...
+ Enable the -I and -i options to obtain detailed information
+ directly from drives about their capabilities and supported ATA
+ feature set. If no device name is specified, hdparm will read
+ identify data from stdin. Enabling this option will add about 16k...
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF
bool "Register an IDE interface (DANGEROUS)"
default BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_SCAN_HWIF
depends on BUSYBOX_CONFIG_HDPARM
help
- Enable the 'hdparm -R' option to register an IDE interface.
- This is dangerous stuff, so you should probably say N.
+ Enable the 'hdparm -R' option to register an IDE interface.
+ This is dangerous stuff, so you should probably say N.
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
bool "Un-register an IDE interface (DANGEROUS)"
default BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
depends on BUSYBOX_CONFIG_HDPARM
help
- Enable the 'hdparm -U' option to un-register an IDE interface.
- This is dangerous stuff, so you should probably say N.
+ Enable the 'hdparm -U' option to un-register an IDE interface.
+ This is dangerous stuff, so you should probably say N.
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET
bool "Perform device reset (DANGEROUS)"
default BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_DRIVE_RESET
depends on BUSYBOX_CONFIG_HDPARM
help
- Enable the 'hdparm -w' option to perform a device reset.
- This is dangerous stuff, so you should probably say N.
+ Enable the 'hdparm -w' option to perform a device reset.
+ This is dangerous stuff, so you should probably say N.
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
bool "Tristate device for hotswap (DANGEROUS)"
default BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
depends on BUSYBOX_CONFIG_HDPARM
help
- Enable the 'hdparm -x' option to tristate device for hotswap,
- and the '-b' option to get/set bus state. This is dangerous
- stuff, so you should probably say N.
+ Enable the 'hdparm -x' option to tristate device for hotswap,
+ and the '-b' option to get/set bus state. This is dangerous
+ stuff, so you should probably say N.
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA
bool "Get/set using_dma flag"
default BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_GETSET_DMA
depends on BUSYBOX_CONFIG_HDPARM
help
- Enable the 'hdparm -d' option to get/set using_dma flag.
+ Enable the 'hdparm -d' option to get/set using_dma flag.
config BUSYBOX_CONFIG_I2CGET
bool "i2cget"
default BUSYBOX_DEFAULT_I2CGET
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Read from I2C/SMBus chip registers.
+ Read from I2C/SMBus chip registers.
config BUSYBOX_CONFIG_I2CSET
bool "i2cset"
default BUSYBOX_DEFAULT_I2CSET
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Set I2C registers.
+ Set I2C registers.
config BUSYBOX_CONFIG_I2CDUMP
bool "i2cdump"
default BUSYBOX_DEFAULT_I2CDUMP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Examine I2C registers.
+ Examine I2C registers.
config BUSYBOX_CONFIG_I2CDETECT
bool "i2cdetect"
default BUSYBOX_DEFAULT_I2CDETECT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Detect I2C chips.
+ Detect I2C chips.
config BUSYBOX_CONFIG_INOTIFYD
bool "inotifyd"
default BUSYBOX_DEFAULT_INOTIFYD # doesn't build on Knoppix 5
help
- Simple inotify daemon. Reports filesystem changes. Requires
- kernel >= 2.6.13
+ Simple inotify daemon. Reports filesystem changes. Requires
+ kernel >= 2.6.13
config BUSYBOX_CONFIG_LESS
bool "less"
default BUSYBOX_DEFAULT_LESS
help
- 'less' is a pager, meaning that it displays text files. It possesses
- a wide array of features, and is an improvement over 'more'.
+ 'less' is a pager, meaning that it displays text files. It possesses
+ a wide array of features, and is an improvement over 'more'.
config BUSYBOX_CONFIG_FEATURE_LESS_MAXLINES
int "Max number of input lines less will try to eat"
default BUSYBOX_DEFAULT_FEATURE_LESS_BRACKETS
depends on BUSYBOX_CONFIG_LESS
help
- This option adds the capability to search for matching left and right
- brackets, facilitating programming.
+ This option adds the capability to search for matching left and right
+ brackets, facilitating programming.
config BUSYBOX_CONFIG_FEATURE_LESS_FLAGS
bool "Enable -m/-M"
default BUSYBOX_DEFAULT_FEATURE_LESS_FLAGS
depends on BUSYBOX_CONFIG_LESS
help
- The -M/-m flag enables a more sophisticated status line.
+ The -M/-m flag enables a more sophisticated status line.
config BUSYBOX_CONFIG_FEATURE_LESS_TRUNCATE
bool "Enable -S"
default BUSYBOX_DEFAULT_FEATURE_LESS_TRUNCATE
depends on BUSYBOX_CONFIG_LESS
help
- The -S flag causes long lines to be truncated rather than
- wrapped.
+ The -S flag causes long lines to be truncated rather than
+ wrapped.
config BUSYBOX_CONFIG_FEATURE_LESS_MARKS
bool "Enable marks"
default BUSYBOX_DEFAULT_FEATURE_LESS_MARKS
depends on BUSYBOX_CONFIG_LESS
help
- Marks enable positions in a file to be stored for easy reference.
+ Marks enable positions in a file to be stored for easy reference.
config BUSYBOX_CONFIG_FEATURE_LESS_REGEXP
bool "Enable regular expressions"
default BUSYBOX_DEFAULT_FEATURE_LESS_REGEXP
depends on BUSYBOX_CONFIG_LESS
help
- Enable regular expressions, allowing complex file searches.
+ Enable regular expressions, allowing complex file searches.
config BUSYBOX_CONFIG_FEATURE_LESS_WINCH
bool "Enable automatic resizing on window size changes"
default BUSYBOX_DEFAULT_FEATURE_LESS_WINCH
depends on BUSYBOX_CONFIG_LESS
help
- Makes less track window size changes.
+ Makes less track window size changes.
config BUSYBOX_CONFIG_FEATURE_LESS_ASK_TERMINAL
bool "Use 'tell me cursor position' ESC sequence to measure window"
default BUSYBOX_DEFAULT_FEATURE_LESS_ASK_TERMINAL
depends on BUSYBOX_CONFIG_FEATURE_LESS_WINCH
help
- Makes less track window size changes.
- If terminal size can't be retrieved and $LINES/$COLUMNS are not set,
- this option makes less perform a last-ditch effort to find it:
- position cursor to 999,999 and ask terminal to report real
- cursor position using "ESC [ 6 n" escape sequence, then read stdin.
- This is not clean but helps a lot on serial lines and such.
+ Makes less track window size changes.
+ If terminal size can't be retrieved and $LINES/$COLUMNS are not set,
+ this option makes less perform a last-ditch effort to find it:
+ position cursor to 999,999 and ask terminal to report real
+ cursor position using "ESC [ 6 n" escape sequence, then read stdin.
+ This is not clean but helps a lot on serial lines and such.
config BUSYBOX_CONFIG_FEATURE_LESS_DASHCMD
bool "Enable flag changes ('-' command)"
default BUSYBOX_DEFAULT_FEATURE_LESS_DASHCMD
depends on BUSYBOX_CONFIG_LESS
help
- This enables the ability to change command-line flags within
- less itself ('-' keyboard command).
+ This enables the ability to change command-line flags within
+ less itself ('-' keyboard command).
config BUSYBOX_CONFIG_FEATURE_LESS_LINENUMS
bool "Enable -N (dynamic switching of line numbers)"
bool "lock"
default BUSYBOX_DEFAULT_LOCK
help
- Small utility for using locks in scripts
+ Small utility for using locks in scripts
config BUSYBOX_CONFIG_LSSCSI
bool "lsscsi"
default BUSYBOX_DEFAULT_LSSCSI
#select PLATFORM_LINUX
help
- lsscsi is a utility for displaying information about SCSI buses in the
- system and devices connected to them.
+ lsscsi is a utility for displaying information about SCSI buses in the
+ system and devices connected to them.
- This version uses sysfs (/sys/bus/scsi/devices) only.
+ This version uses sysfs (/sys/bus/scsi/devices) only.
config BUSYBOX_CONFIG_MAKEDEVS
bool "makedevs"
default BUSYBOX_DEFAULT_MAKEDEVS
help
- 'makedevs' is a utility used to create a batch of devices with
- one command.
+ 'makedevs' is a utility used to create a batch of devices with
+ one command.
- There are two choices for command line behaviour, the interface
- as used by LEAF/Linux Router Project, or a device table file.
+ There are two choices for command line behaviour, the interface
+ as used by LEAF/Linux Router Project, or a device table file.
- 'leaf' is traditionally what busybox follows, it allows multiple
- devices of a particluar type to be created per command.
- e.g. /dev/hda[0-9]
- Device properties are passed as command line arguments.
+ 'leaf' is traditionally what busybox follows, it allows multiple
+ devices of a particluar type to be created per command.
+ e.g. /dev/hda[0-9]
+ Device properties are passed as command line arguments.
- 'table' reads device properties from a file or stdin, allowing
- a batch of unrelated devices to be made with one command.
- User/group names are allowed as an alternative to uid/gid.
+ 'table' reads device properties from a file or stdin, allowing
+ a batch of unrelated devices to be made with one command.
+ User/group names are allowed as an alternative to uid/gid.
choice
prompt "Choose makedevs behaviour"
bool "man"
default BUSYBOX_DEFAULT_MAN
help
- Format and display manual pages.
+ Format and display manual pages.
config BUSYBOX_CONFIG_MICROCOM
bool "microcom"
default BUSYBOX_DEFAULT_MICROCOM
help
- The poor man's minicom utility for chatting with serial port devices.
+ The poor man's minicom utility for chatting with serial port devices.
config BUSYBOX_CONFIG_MT
bool "mt"
default BUSYBOX_DEFAULT_MT
help
- mt is used to control tape devices. You can use the mt utility
- to advance or rewind a tape past a specified number of archive
- files on the tape.
+ mt is used to control tape devices. You can use the mt utility
+ to advance or rewind a tape past a specified number of archive
+ files on the tape.
config BUSYBOX_CONFIG_NANDWRITE
bool "nandwrite"
default BUSYBOX_DEFAULT_NANDWRITE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Write to the specified MTD device, with bad blocks awareness
+ Write to the specified MTD device, with bad blocks awareness
config BUSYBOX_CONFIG_NANDDUMP
bool "nanddump"
default BUSYBOX_DEFAULT_NANDDUMP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Dump the content of raw NAND chip
+ Dump the content of raw NAND chip
config BUSYBOX_CONFIG_PARTPROBE
bool "partprobe"
default BUSYBOX_DEFAULT_PARTPROBE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Ask kernel to rescan partition table.
+ Ask kernel to rescan partition table.
config BUSYBOX_CONFIG_RAIDAUTORUN
bool "raidautorun"
default BUSYBOX_DEFAULT_RAIDAUTORUN
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- raidautorun tells the kernel md driver to
- search and start RAID arrays.
+ raidautorun tells the kernel md driver to
+ search and start RAID arrays.
config BUSYBOX_CONFIG_READAHEAD
bool "readahead"
default BUSYBOX_DEFAULT_READAHEAD
depends on BUSYBOX_CONFIG_LFS
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Preload the files listed on the command line into RAM cache so that
- subsequent reads on these files will not block on disk I/O.
+ Preload the files listed on the command line into RAM cache so that
+ subsequent reads on these files will not block on disk I/O.
- This applet just calls the readahead(2) system call on each file.
- It is mainly useful in system startup scripts to preload files
- or executables before they are used. When used at the right time
- (in particular when a CPU bound process is running) it can
- significantly speed up system startup.
+ This applet just calls the readahead(2) system call on each file.
+ It is mainly useful in system startup scripts to preload files
+ or executables before they are used. When used at the right time
+ (in particular when a CPU bound process is running) it can
+ significantly speed up system startup.
- As readahead(2) blocks until each file has been read, it is best to
- run this applet as a background job.
+ As readahead(2) blocks until each file has been read, it is best to
+ run this applet as a background job.
config BUSYBOX_CONFIG_RFKILL
bool "rfkill"
default BUSYBOX_DEFAULT_RFKILL # doesn't build on Ubuntu 9.04
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Enable/disable wireless devices.
+ Enable/disable wireless devices.
- rfkill list : list all wireless devices
- rfkill list bluetooth : list all bluetooth devices
- rfkill list 1 : list device corresponding to the given index
- rfkill block|unblock wlan : block/unblock all wlan(wifi) devices
+ rfkill list : list all wireless devices
+ rfkill list bluetooth : list all bluetooth devices
+ rfkill list 1 : list device corresponding to the given index
+ rfkill block|unblock wlan : block/unblock all wlan(wifi) devices
config BUSYBOX_CONFIG_RUNLEVEL
bool "runlevel"
default BUSYBOX_DEFAULT_RUNLEVEL
depends on BUSYBOX_CONFIG_FEATURE_UTMP
help
- find the current and previous system runlevel.
+ find the current and previous system runlevel.
- This applet uses utmp but does not rely on busybox supporing
- utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc.
+ This applet uses utmp but does not rely on busybox supporing
+ utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc.
config BUSYBOX_CONFIG_RX
bool "rx"
default BUSYBOX_DEFAULT_RX
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Receive files using the Xmodem protocol.
+ Receive files using the Xmodem protocol.
config BUSYBOX_CONFIG_SETSERIAL
bool "setserial"
default BUSYBOX_DEFAULT_SETSERIAL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Retrieve or set Linux serial port.
+ Retrieve or set Linux serial port.
config BUSYBOX_CONFIG_STRINGS
bool "strings"
default BUSYBOX_DEFAULT_STRINGS
help
- strings prints the printable character sequences for each file
- specified.
+ strings prints the printable character sequences for each file
+ specified.
config BUSYBOX_CONFIG_TIME
bool "time"
default BUSYBOX_DEFAULT_TIME
help
- The time command runs the specified program with the given arguments.
- When the command finishes, time writes a message to standard output
- giving timing statistics about this program run.
+ The time command runs the specified program with the given arguments.
+ When the command finishes, time writes a message to standard output
+ giving timing statistics about this program run.
config BUSYBOX_CONFIG_TTYSIZE
bool "ttysize"
default BUSYBOX_DEFAULT_TTYSIZE
help
- A replacement for "stty size". Unlike stty, can report only width,
- only height, or both, in any order. It also does not complain on
- error, but returns default 80x24.
- Usage in shell scripts: width=`ttysize w`.
+ A replacement for "stty size". Unlike stty, can report only width,
+ only height, or both, in any order. It also does not complain on
+ error, but returns default 80x24.
+ Usage in shell scripts: width=`ttysize w`.
config BUSYBOX_CONFIG_UBIATTACH
bool "ubiattach"
default BUSYBOX_DEFAULT_UBIATTACH
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Attach MTD device to an UBI device.
+ Attach MTD device to an UBI device.
config BUSYBOX_CONFIG_UBIDETACH
bool "ubidetach"
default BUSYBOX_DEFAULT_UBIDETACH
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Detach MTD device from an UBI device.
+ Detach MTD device from an UBI device.
config BUSYBOX_CONFIG_UBIMKVOL
bool "ubimkvol"
default BUSYBOX_DEFAULT_UBIMKVOL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Create a UBI volume.
+ Create a UBI volume.
config BUSYBOX_CONFIG_UBIRMVOL
bool "ubirmvol"
default BUSYBOX_DEFAULT_UBIRMVOL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Delete a UBI volume.
+ Delete a UBI volume.
config BUSYBOX_CONFIG_UBIRSVOL
bool "ubirsvol"
default BUSYBOX_DEFAULT_UBIRSVOL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Resize a UBI volume.
+ Resize a UBI volume.
config BUSYBOX_CONFIG_UBIUPDATEVOL
bool "ubiupdatevol"
default BUSYBOX_DEFAULT_UBIUPDATEVOL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Update a UBI volume.
+ Update a UBI volume.
config BUSYBOX_CONFIG_UBIRENAME
bool "ubirename"
default BUSYBOX_DEFAULT_UBIRENAME
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Utility to rename UBI volumes
+ Utility to rename UBI volumes
config BUSYBOX_CONFIG_VOLNAME
bool "volname"
default BUSYBOX_DEFAULT_VOLNAME
help
- Prints a CD-ROM volume name.
+ Prints a CD-ROM volume name.
config BUSYBOX_CONFIG_WATCHDOG
bool "watchdog"
default BUSYBOX_DEFAULT_WATCHDOG
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- The watchdog utility is used with hardware or software watchdog
- device drivers. It opens the specified watchdog device special file
- and periodically writes a magic character to the device. If the
- watchdog applet ever fails to write the magic character within a
- certain amount of time, the watchdog device assumes the system has
- hung, and will cause the hardware to reboot.
+ The watchdog utility is used with hardware or software watchdog
+ device drivers. It opens the specified watchdog device special file
+ and periodically writes a magic character to the device. If the
+ watchdog applet ever fails to write the magic character within a
+ certain amount of time, the watchdog device assumes the system has
+ hung, and will cause the hardware to reboot.
endmenu
bool "Simplified modutils"
default BUSYBOX_DEFAULT_MODPROBE_SMALL
help
- Build smaller (~1.5 kbytes), simplified module tools.
+ Build smaller (~1.5 kbytes), simplified module tools.
- This option by itself does not enable any applets -
- you need to select applets individually below.
+ This option by itself does not enable any applets -
+ you need to select applets individually below.
- With this option modprobe does not require modules.dep file
- and does not use /etc/modules.conf file.
- It scans module files in /lib/modules/`uname -r` and
- determines dependencies and module alias names on the fly.
- This may make module loading slower, most notably
- when one needs to load module by alias (this requires
- scanning through module _bodies_).
+ With this option modprobe does not require modules.dep file
+ and does not use /etc/modules.conf file.
+ It scans module files in /lib/modules/`uname -r` and
+ determines dependencies and module alias names on the fly.
+ This may make module loading slower, most notably
+ when one needs to load module by alias (this requires
+ scanning through module _bodies_).
- At the first attempt to load a module by alias modprobe
- will try to generate modules.dep.bb file in order to speed up
- future loads by alias. Failure to do so (read-only /lib/modules,
- etc) is not reported, and future modprobes will be slow too.
+ At the first attempt to load a module by alias modprobe
+ will try to generate modules.dep.bb file in order to speed up
+ future loads by alias. Failure to do so (read-only /lib/modules,
+ etc) is not reported, and future modprobes will be slow too.
- NB: modules.dep.bb file format is not compatible
- with modules.dep file as created/used by standard module tools.
+ NB: modules.dep.bb file format is not compatible
+ with modules.dep file as created/used by standard module tools.
- Additional module parameters can be stored in
- /etc/modules/$module_name files.
+ Additional module parameters can be stored in
+ /etc/modules/$module_name files.
config BUSYBOX_CONFIG_DEPMOD
bool "depmod"
default BUSYBOX_DEFAULT_DEPMOD
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- depmod generates modules.dep (and potentially modules.alias
- and modules.symbols) that contain dependency information
- for modprobe.
+ depmod generates modules.dep (and potentially modules.alias
+ and modules.symbols) that contain dependency information
+ for modprobe.
config BUSYBOX_CONFIG_INSMOD
bool "insmod"
default BUSYBOX_DEFAULT_INSMOD
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- insmod is used to load specified modules in the running kernel.
+ insmod is used to load specified modules in the running kernel.
config BUSYBOX_CONFIG_LSMOD
bool "lsmod"
default BUSYBOX_DEFAULT_LSMOD
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- lsmod is used to display a list of loaded modules.
+ lsmod is used to display a list of loaded modules.
config BUSYBOX_CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT
bool "Pretty output"
default BUSYBOX_DEFAULT_FEATURE_LSMOD_PRETTY_2_6_OUTPUT
depends on BUSYBOX_CONFIG_LSMOD && !BUSYBOX_CONFIG_MODPROBE_SMALL
help
- This option makes output format of lsmod adjusted to
- the format of module-init-tools for Linux kernel 2.6.
- Increases size somewhat.
+ This option makes output format of lsmod adjusted to
+ the format of module-init-tools for Linux kernel 2.6.
+ Increases size somewhat.
config BUSYBOX_CONFIG_MODINFO
bool "modinfo"
default BUSYBOX_DEFAULT_MODINFO
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Show information about a Linux Kernel module
+ Show information about a Linux Kernel module
config BUSYBOX_CONFIG_MODPROBE
bool "modprobe"
default BUSYBOX_DEFAULT_MODPROBE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Handle the loading of modules, and their dependencies on a high
- level.
+ Handle the loading of modules, and their dependencies on a high
+ level.
config BUSYBOX_CONFIG_FEATURE_MODPROBE_BLACKLIST
bool "Blacklist support"
default BUSYBOX_DEFAULT_FEATURE_MODPROBE_BLACKLIST
depends on BUSYBOX_CONFIG_MODPROBE && !BUSYBOX_CONFIG_MODPROBE_SMALL
help
- Say 'y' here to enable support for the 'blacklist' command in
- modprobe.conf. This prevents the alias resolver to resolve
- blacklisted modules. This is useful if you want to prevent your
- hardware autodetection scripts to load modules like evdev, frame
- buffer drivers etc.
+ Say 'y' here to enable support for the 'blacklist' command in
+ modprobe.conf. This prevents the alias resolver to resolve
+ blacklisted modules. This is useful if you want to prevent your
+ hardware autodetection scripts to load modules like evdev, frame
+ buffer drivers etc.
config BUSYBOX_CONFIG_RMMOD
bool "rmmod"
default BUSYBOX_DEFAULT_RMMOD
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- rmmod is used to unload specified modules from the kernel.
+ rmmod is used to unload specified modules from the kernel.
comment "Options common to multiple modutils"
default BUSYBOX_DEFAULT_FEATURE_CMDLINE_MODULE_OPTIONS
depends on BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_MODPROBE
help
- Allow insmod and modprobe take module options from the applets'
- command line.
+ Allow insmod and modprobe take module options from the applets'
+ command line.
config BUSYBOX_CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED
bool "Skip loading of already loaded modules"
default BUSYBOX_DEFAULT_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED
depends on BUSYBOX_CONFIG_MODPROBE_SMALL && (BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_MODPROBE)
help
- Check if the module is already loaded.
+ Check if the module is already loaded.
config BUSYBOX_CONFIG_FEATURE_2_4_MODULES
bool "Support version 2.2/2.4 Linux kernels"
default BUSYBOX_DEFAULT_FEATURE_2_4_MODULES
depends on (BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_LSMOD || BUSYBOX_CONFIG_MODPROBE || BUSYBOX_CONFIG_RMMOD) && !BUSYBOX_CONFIG_MODPROBE_SMALL
help
- Support module loading for 2.2.x and 2.4.x Linux kernels.
- This increases size considerably. Say N unless you plan
- to run ancient kernels.
+ Support module loading for 2.2.x and 2.4.x Linux kernels.
+ This increases size considerably. Say N unless you plan
+ to run ancient kernels.
config BUSYBOX_CONFIG_FEATURE_INSMOD_VERSION_CHECKING
bool "Enable module version checking"
default BUSYBOX_DEFAULT_FEATURE_INSMOD_VERSION_CHECKING
depends on BUSYBOX_CONFIG_FEATURE_2_4_MODULES && (BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_MODPROBE)
help
- Support checking of versions for modules. This is used to
- ensure that the kernel and module are made for each other.
+ Support checking of versions for modules. This is used to
+ ensure that the kernel and module are made for each other.
config BUSYBOX_CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS
bool "Add module symbols to kernel symbol table"
default BUSYBOX_DEFAULT_FEATURE_INSMOD_KSYMOOPS_SYMBOLS
depends on BUSYBOX_CONFIG_FEATURE_2_4_MODULES && (BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_MODPROBE)
help
- By adding module symbols to the kernel symbol table, Oops messages
- occurring within kernel modules can be properly debugged. By enabling
- this feature, module symbols will always be added to the kernel symbol
- table for proper debugging support. If you are not interested in
- Oops messages from kernel modules, say N.
+ By adding module symbols to the kernel symbol table, Oops messages
+ occurring within kernel modules can be properly debugged. By enabling
+ this feature, module symbols will always be added to the kernel symbol
+ table for proper debugging support. If you are not interested in
+ Oops messages from kernel modules, say N.
config BUSYBOX_CONFIG_FEATURE_INSMOD_LOADINKMEM
bool "In kernel memory optimization (uClinux only)"
default BUSYBOX_DEFAULT_FEATURE_INSMOD_LOADINKMEM
depends on BUSYBOX_CONFIG_FEATURE_2_4_MODULES && (BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_MODPROBE)
help
- This is a special uClinux only memory optimization that lets insmod
- load the specified kernel module directly into kernel space, reducing
- memory usage by preventing the need for two copies of the module
- being loaded into memory.
+ This is a special uClinux only memory optimization that lets insmod
+ load the specified kernel module directly into kernel space, reducing
+ memory usage by preventing the need for two copies of the module
+ being loaded into memory.
config BUSYBOX_CONFIG_FEATURE_INSMOD_LOAD_MAP
bool "Enable insmod load map (-m) option"
default BUSYBOX_DEFAULT_FEATURE_INSMOD_LOAD_MAP
depends on BUSYBOX_CONFIG_FEATURE_2_4_MODULES && BUSYBOX_CONFIG_INSMOD
help
- Enabling this, one would be able to get a load map
- output on stdout. This makes kernel module debugging
- easier.
- If you don't plan to debug kernel modules, you
- don't need this option.
+ Enabling this, one would be able to get a load map
+ output on stdout. This makes kernel module debugging
+ easier.
+ If you don't plan to debug kernel modules, you
+ don't need this option.
config BUSYBOX_CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL
bool "Symbols in load map"
default BUSYBOX_DEFAULT_FEATURE_INSMOD_LOAD_MAP_FULL
depends on BUSYBOX_CONFIG_FEATURE_INSMOD_LOAD_MAP
help
- Without this option, -m will only output section
- load map. With this option, -m will also output
- symbols load map.
+ Without this option, -m will only output section
+ load map. With this option, -m will also output
+ symbols load map.
config BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE
bool "Support tainted module checking with new kernels"
default BUSYBOX_DEFAULT_FEATURE_CHECK_TAINTED_MODULE
depends on (BUSYBOX_CONFIG_LSMOD || BUSYBOX_CONFIG_FEATURE_2_4_MODULES) && !BUSYBOX_CONFIG_MODPROBE_SMALL
help
- Support checking for tainted modules. These are usually binary
- only modules that will make the linux-kernel list ignore your
- support request.
- This option is required to support GPLONLY modules.
+ Support checking for tainted modules. These are usually binary
+ only modules that will make the linux-kernel list ignore your
+ support request.
+ This option is required to support GPLONLY modules.
config BUSYBOX_CONFIG_FEATURE_INSMOD_TRY_MMAP
bool "Try to load module from a mmap'ed area"
default BUSYBOX_DEFAULT_FEATURE_INSMOD_TRY_MMAP
depends on (BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_MODPROBE) && !BUSYBOX_CONFIG_MODPROBE_SMALL
help
- This option causes module loading code to try to mmap
- module first. If it does not work (for example,
- it does not work for compressed modules), module will be read
- (and unpacked if needed) into a memory block allocated by malloc.
+ This option causes module loading code to try to mmap
+ module first. If it does not work (for example,
+ it does not work for compressed modules), module will be read
+ (and unpacked if needed) into a memory block allocated by malloc.
- The only case when mmap works but malloc does not is when
- you are trying to load a big module on a very memory-constrained
- machine. Malloc will momentarily need 2x as much memory as mmap.
+ The only case when mmap works but malloc does not is when
+ you are trying to load a big module on a very memory-constrained
+ machine. Malloc will momentarily need 2x as much memory as mmap.
- Choosing N saves about 250 bytes of code (on 32-bit x86).
+ Choosing N saves about 250 bytes of code (on 32-bit x86).
config BUSYBOX_CONFIG_FEATURE_MODUTILS_ALIAS
bool "Support module.aliases file"
default BUSYBOX_DEFAULT_FEATURE_MODUTILS_ALIAS
depends on (BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_MODPROBE) && !BUSYBOX_CONFIG_MODPROBE_SMALL
help
- Generate and parse modules.alias containing aliases for bus
- identifiers:
+ Generate and parse modules.alias containing aliases for bus
+ identifiers:
alias pcmcia:m*c*f03fn*pfn*pa*pb*pc*pd* parport_cs
- and aliases for logical modules names e.g.:
+ and aliases for logical modules names e.g.:
alias padlock_aes aes
alias aes_i586 aes
alias aes_generic aes
- Say Y if unsure.
+ Say Y if unsure.
config BUSYBOX_CONFIG_FEATURE_MODUTILS_SYMBOLS
bool "Support module.symbols file"
default BUSYBOX_DEFAULT_FEATURE_MODUTILS_SYMBOLS
depends on (BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_MODPROBE) && !BUSYBOX_CONFIG_MODPROBE_SMALL
help
- Generate and parse modules.symbols containing aliases for
- symbol_request() kernel calls, such as:
+ Generate and parse modules.symbols containing aliases for
+ symbol_request() kernel calls, such as:
alias symbol:usb_sg_init usbcore
- Say Y if unsure.
+ Say Y if unsure.
config BUSYBOX_CONFIG_DEFAULT_MODULES_DIR
string "Default directory containing modules"
default BUSYBOX_DEFAULT_DEFAULT_MODULES_DIR
depends on BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_MODPROBE || BUSYBOX_CONFIG_MODINFO
help
- Directory that contains kernel modules.
- Defaults to "/lib/modules"
+ Directory that contains kernel modules.
+ Defaults to "/lib/modules"
config BUSYBOX_CONFIG_DEFAULT_DEPMOD_FILE
string "Default name of modules.dep"
default BUSYBOX_DEFAULT_DEFAULT_DEPMOD_FILE
depends on BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_MODPROBE || BUSYBOX_CONFIG_MODINFO
help
- Filename that contains kernel modules dependencies.
- Defaults to "modules.dep".
- If you configured the "simplified modutils" (MODPROBE_SMALL), a
- ".bb" suffix will be added after this name. Do not specify ".bb"
- here unless you intend your depmod or modprobe to work on
- "modules.dep.bb.bb" or such.
+ Filename that contains kernel modules dependencies.
+ Defaults to "modules.dep".
+ If you configured the "simplified modutils" (MODPROBE_SMALL), a
+ ".bb" suffix will be added after this name. Do not specify ".bb"
+ here unless you intend your depmod or modprobe to work on
+ "modules.dep.bb.bb" or such.
endmenu
default BUSYBOX_DEFAULT_FEATURE_IPV6
depends on IPV6
help
- Enable IPv6 support in busybox.
- This adds IPv6 support in the networking applets.
+ Enable IPv6 support in busybox.
+ This adds IPv6 support in the networking applets.
config BUSYBOX_CONFIG_FEATURE_UNIX_LOCAL
bool "Enable Unix domain socket support (usually not needed)"
default BUSYBOX_DEFAULT_FEATURE_UNIX_LOCAL
help
- Enable Unix domain socket support in all busybox networking
- applets. Address of the form local:/path/to/unix/socket
- will be recognized.
+ Enable Unix domain socket support in all busybox networking
+ applets. Address of the form local:/path/to/unix/socket
+ will be recognized.
- This extension is almost never used in real world usage.
- You most likely want to say N.
+ This extension is almost never used in real world usage.
+ You most likely want to say N.
config BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS
bool "Prefer IPv4 addresses from DNS queries"
default BUSYBOX_DEFAULT_FEATURE_PREFER_IPV4_ADDRESS
depends on BUSYBOX_CONFIG_FEATURE_IPV6
help
- Use IPv4 address of network host if it has one.
+ Use IPv4 address of network host if it has one.
- If this option is off, the first returned address will be used.
- This may cause problems when your DNS server is IPv6-capable and
- is returning IPv6 host addresses too. If IPv6 address
- precedes IPv4 one in DNS reply, busybox network applets
- (e.g. wget) will use IPv6 address. On an IPv6-incapable host
- or network applets will fail to connect to the host
- using IPv6 address.
+ If this option is off, the first returned address will be used.
+ This may cause problems when your DNS server is IPv6-capable and
+ is returning IPv6 host addresses too. If IPv6 address
+ precedes IPv4 one in DNS reply, busybox network applets
+ (e.g. wget) will use IPv6 address. On an IPv6-incapable host
+ or network applets will fail to connect to the host
+ using IPv6 address.
config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS
bool "Verbose resolution errors"
default BUSYBOX_DEFAULT_VERBOSE_RESOLUTION_ERRORS
help
- Enable if you are not satisfied with simplistic
- "can't resolve 'hostname.com'" and want to know more.
- This may increase size of your executable a bit.
+ Enable if you are not satisfied with simplistic
+ "can't resolve 'hostname.com'" and want to know more.
+ This may increase size of your executable a bit.
config BUSYBOX_CONFIG_ARP
bool "arp"
default BUSYBOX_DEFAULT_ARP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Manipulate the system ARP cache.
+ Manipulate the system ARP cache.
config BUSYBOX_CONFIG_ARPING
bool "arping"
default BUSYBOX_DEFAULT_ARPING
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Ping hosts by ARP packets.
+ Ping hosts by ARP packets.
config BUSYBOX_CONFIG_BRCTL
bool "brctl"
default BUSYBOX_DEFAULT_BRCTL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Manage ethernet bridges.
- Supports addbr/delbr and addif/delif.
+ Manage ethernet bridges.
+ Supports addbr/delbr and addif/delif.
config BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
bool "Fancy options"
default BUSYBOX_DEFAULT_FEATURE_BRCTL_FANCY
depends on BUSYBOX_CONFIG_BRCTL
help
- Add support for extended option like:
+ Add support for extended option like:
setageing, setfd, sethello, setmaxage,
setpathcost, setportprio, setbridgeprio,
stp
- This adds about 600 bytes.
+ This adds about 600 bytes.
config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW
bool "Support show"
default BUSYBOX_DEFAULT_FEATURE_BRCTL_SHOW
depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
help
- Add support for option which prints the current config:
+ Add support for option which prints the current config:
show
config BUSYBOX_CONFIG_DNSD
bool "dnsd"
default BUSYBOX_DEFAULT_DNSD
help
- Small and static DNS server daemon.
+ Small and static DNS server daemon.
config BUSYBOX_CONFIG_ETHER_WAKE
bool "ether-wake"
default BUSYBOX_DEFAULT_ETHER_WAKE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Send a magic packet to wake up sleeping machines.
+ Send a magic packet to wake up sleeping machines.
config BUSYBOX_CONFIG_FTPD
bool "ftpd"
default BUSYBOX_DEFAULT_FTPD
help
- Simple FTP daemon. You have to run it via inetd.
+ Simple FTP daemon. You have to run it via inetd.
config BUSYBOX_CONFIG_FEATURE_FTPD_WRITE
bool "Enable upload commands"
default BUSYBOX_DEFAULT_FEATURE_FTPD_WRITE
depends on BUSYBOX_CONFIG_FTPD
help
- Enable all kinds of FTP upload commands (-w option)
+ Enable all kinds of FTP upload commands (-w option)
config BUSYBOX_CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST
bool "Enable workaround for RFC-violating clients"
default BUSYBOX_DEFAULT_FEATURE_FTPD_ACCEPT_BROKEN_LIST
depends on BUSYBOX_CONFIG_FTPD
help
- Some ftp clients (among them KDE's Konqueror) issue illegal
- "LIST -l" requests. This option works around such problems.
- It might prevent you from listing files starting with "-" and
- it increases the code size by ~40 bytes.
- Most other ftp servers seem to behave similar to this.
+ Some ftp clients (among them KDE's Konqueror) issue illegal
+ "LIST -l" requests. This option works around such problems.
+ It might prevent you from listing files starting with "-" and
+ it increases the code size by ~40 bytes.
+ Most other ftp servers seem to behave similar to this.
config BUSYBOX_CONFIG_FEATURE_FTPD_AUTHENTICATION
bool "Enable authentication"
default BUSYBOX_DEFAULT_FEATURE_FTPD_AUTHENTICATION
depends on BUSYBOX_CONFIG_FTPD
help
- Enable basic system login as seen in telnet etc.
+ Enable basic system login as seen in telnet etc.
config BUSYBOX_CONFIG_FTPGET
bool "ftpget"
default BUSYBOX_DEFAULT_FTPGET
help
- Retrieve a remote file via FTP.
+ Retrieve a remote file via FTP.
config BUSYBOX_CONFIG_FTPPUT
bool "ftpput"
default BUSYBOX_DEFAULT_FTPPUT
help
- Store a remote file via FTP.
+ Store a remote file via FTP.
config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS
bool "Enable long options in ftpget/ftpput"
bool "hostname"
default BUSYBOX_DEFAULT_HOSTNAME
help
- Show or set the system's host name.
+ Show or set the system's host name.
config BUSYBOX_CONFIG_DNSDOMAINNAME
bool "dnsdomainname"
default BUSYBOX_DEFAULT_DNSDOMAINNAME
help
- Alias to "hostname -d".
+ Alias to "hostname -d".
config BUSYBOX_CONFIG_HTTPD
bool "httpd"
default BUSYBOX_DEFAULT_HTTPD
help
- HTTP server.
+ HTTP server.
config BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES
bool "Support 'Ranges:' header"
default BUSYBOX_DEFAULT_FEATURE_HTTPD_RANGES
depends on BUSYBOX_CONFIG_HTTPD
help
- Makes httpd emit "Accept-Ranges: bytes" header and understand
- "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted
- downloads, seeking in multimedia players etc.
+ Makes httpd emit "Accept-Ranges: bytes" header and understand
+ "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted
+ downloads, seeking in multimedia players etc.
config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID
bool "Enable -u <user> option"
default BUSYBOX_DEFAULT_FEATURE_HTTPD_SETUID
depends on BUSYBOX_CONFIG_HTTPD
help
- This option allows the server to run as a specific user
- rather than defaulting to the user that starts the server.
- Use of this option requires special privileges to change to a
- different user.
+ This option allows the server to run as a specific user
+ rather than defaulting to the user that starts the server.
+ Use of this option requires special privileges to change to a
+ different user.
config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
bool "Enable Basic http Authentication"
default BUSYBOX_DEFAULT_FEATURE_HTTPD_BASIC_AUTH
depends on BUSYBOX_CONFIG_HTTPD
help
- Utilizes password settings from /etc/httpd.conf for basic
- authentication on a per url basis.
- Example for httpd.conf file:
- /adm:toor:PaSsWd
+ Utilizes password settings from /etc/httpd.conf for basic
+ authentication on a per url basis.
+ Example for httpd.conf file:
+ /adm:toor:PaSsWd
config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5
bool "Support MD5 crypted passwords for http Authentication"
default BUSYBOX_DEFAULT_FEATURE_HTTPD_AUTH_MD5
depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
help
- Enables encrypted passwords, and wildcard user/passwords
- in httpd.conf file.
- User '*' means 'any system user name is ok',
- password of '*' means 'use system password for this user'
- Examples:
- /adm:toor:$1$P/eKnWXS$aI1aPGxT.dJD5SzqAKWrF0
- /adm:root:*
- /wiki:*:*
+ Enables encrypted passwords, and wildcard user/passwords
+ in httpd.conf file.
+ User '*' means 'any system user name is ok',
+ password of '*' means 'use system password for this user'
+ Examples:
+ /adm:toor:$1$P/eKnWXS$aI1aPGxT.dJD5SzqAKWrF0
+ /adm:root:*
+ /wiki:*:*
config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
bool "Support Common Gateway Interface (CGI)"
default BUSYBOX_DEFAULT_FEATURE_HTTPD_CGI
depends on BUSYBOX_CONFIG_HTTPD
help
- This option allows scripts and executables to be invoked
- when specific URLs are requested.
+ This option allows scripts and executables to be invoked
+ when specific URLs are requested.
config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
bool "Support running scripts through an interpreter"
default BUSYBOX_DEFAULT_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
help
- This option enables support for running scripts through an
- interpreter. Turn this on if you want PHP scripts to work
- properly. You need to supply an additional line in your
- httpd.conf file:
- *.php:/path/to/your/php
+ This option enables support for running scripts through an
+ interpreter. Turn this on if you want PHP scripts to work
+ properly. You need to supply an additional line in your
+ httpd.conf file:
+ *.php:/path/to/your/php
config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
bool "Set REMOTE_PORT environment variable for CGI"
default BUSYBOX_DEFAULT_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
help
- Use of this option can assist scripts in generating
- references that contain a unique port number.
+ Use of this option can assist scripts in generating
+ references that contain a unique port number.
config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR
bool "Enable -e option (useful for CGIs written as shell scripts)"
default BUSYBOX_DEFAULT_FEATURE_HTTPD_ENCODE_URL_STR
depends on BUSYBOX_CONFIG_HTTPD
help
- This option allows html encoding of arbitrary strings for display
- by the browser. Output goes to stdout.
- For example, httpd -e "<Hello World>" produces
- "<Hello World>".
+ This option allows html encoding of arbitrary strings for display
+ by the browser. Output goes to stdout.
+ For example, httpd -e "<Hello World>" produces
+ "<Hello World>".
config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES
bool "Support custom error pages"
default BUSYBOX_DEFAULT_FEATURE_HTTPD_ERROR_PAGES
depends on BUSYBOX_CONFIG_HTTPD
help
- This option allows you to define custom error pages in
- the configuration file instead of the default HTTP status
- error pages. For instance, if you add the line:
+ This option allows you to define custom error pages in
+ the configuration file instead of the default HTTP status
+ error pages. For instance, if you add the line:
E404:/path/e404.html
- in the config file, the server will respond the specified
- '/path/e404.html' file instead of the terse '404 NOT FOUND'
- message.
+ in the config file, the server will respond the specified
+ '/path/e404.html' file instead of the terse '404 NOT FOUND'
+ message.
config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY
bool "Support reverse proxy"
default BUSYBOX_DEFAULT_FEATURE_HTTPD_PROXY
depends on BUSYBOX_CONFIG_HTTPD
help
- This option allows you to define URLs that will be forwarded
- to another HTTP server. To setup add the following line to the
- configuration file
+ This option allows you to define URLs that will be forwarded
+ to another HTTP server. To setup add the following line to the
+ configuration file
P:/url/:http://hostname[:port]/new/path/
- Then a request to /url/myfile will be forwarded to
- http://hostname[:port]/new/path/myfile.
+ Then a request to /url/myfile will be forwarded to
+ http://hostname[:port]/new/path/myfile.
config BUSYBOX_CONFIG_FEATURE_HTTPD_GZIP
bool "Support GZIP content encoding"
default BUSYBOX_DEFAULT_FEATURE_HTTPD_GZIP
depends on BUSYBOX_CONFIG_HTTPD
help
- Makes httpd send files using GZIP content encoding if the
- client supports it and a pre-compressed <file>.gz exists.
+ Makes httpd send files using GZIP content encoding if the
+ client supports it and a pre-compressed <file>.gz exists.
config BUSYBOX_CONFIG_IFCONFIG
bool "ifconfig"
default BUSYBOX_DEFAULT_IFCONFIG
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Ifconfig is used to configure the kernel-resident network interfaces.
+ Ifconfig is used to configure the kernel-resident network interfaces.
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS
bool "Enable status reporting output (+7k)"
default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_STATUS
depends on BUSYBOX_CONFIG_IFCONFIG
help
- If ifconfig is called with no arguments it will display the status
- of the currently active interfaces.
+ If ifconfig is called with no arguments it will display the status
+ of the currently active interfaces.
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP
bool "Enable slip-specific options \"keepalive\" and \"outfill\""
default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_SLIP
depends on BUSYBOX_CONFIG_IFCONFIG
help
- Allow "keepalive" and "outfill" support for SLIP. If you're not
- planning on using serial lines, leave this unchecked.
+ Allow "keepalive" and "outfill" support for SLIP. If you're not
+ planning on using serial lines, leave this unchecked.
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
depends on BUSYBOX_CONFIG_IFCONFIG
help
- Allow the start address for shared memory, start address for I/O,
- and/or the interrupt line used by the specified device.
+ Allow the start address for shared memory, start address for I/O,
+ and/or the interrupt line used by the specified device.
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW
bool "Enable option \"hw\" (ether only)"
default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_HW
depends on BUSYBOX_CONFIG_IFCONFIG
help
- Set the hardware address of this interface, if the device driver
- supports this operation. Currently, we only support the 'ether'
- class.
+ Set the hardware address of this interface, if the device driver
+ supports this operation. Currently, we only support the 'ether'
+ class.
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
bool "Set the broadcast automatically"
default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_BROADCAST_PLUS
depends on BUSYBOX_CONFIG_IFCONFIG
help
- Setting this will make ifconfig attempt to find the broadcast
- automatically if the value '+' is used.
+ Setting this will make ifconfig attempt to find the broadcast
+ automatically if the value '+' is used.
config BUSYBOX_CONFIG_IFENSLAVE
bool "ifenslave"
default BUSYBOX_DEFAULT_IFENSLAVE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Userspace application to bind several interfaces
- to a logical interface (use with kernel bonding driver).
+ Userspace application to bind several interfaces
+ to a logical interface (use with kernel bonding driver).
config BUSYBOX_CONFIG_IFPLUGD
bool "ifplugd"
default BUSYBOX_DEFAULT_IFPLUGD
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Network interface plug detection daemon.
+ Network interface plug detection daemon.
config BUSYBOX_CONFIG_IFUP
bool "ifup"
default BUSYBOX_DEFAULT_IFUP
help
- Activate the specified interfaces. This applet makes use
- of either "ifconfig" and "route" or the "ip" command to actually
- configure network interfaces. Therefore, you will probably also want
- to enable either IFCONFIG and ROUTE, or enable
- FEATURE_IFUPDOWN_IP and the various IP options. Of
- course you could use non-busybox versions of these programs, so
- against my better judgement (since this will surely result in plenty
- of support questions on the mailing list), I do not force you to
- enable these additional options. It is up to you to supply either
- "ifconfig", "route" and "run-parts" or the "ip" command, either
- via busybox or via standalone utilities.
+ Activate the specified interfaces. This applet makes use
+ of either "ifconfig" and "route" or the "ip" command to actually
+ configure network interfaces. Therefore, you will probably also want
+ to enable either IFCONFIG and ROUTE, or enable
+ FEATURE_IFUPDOWN_IP and the various IP options. Of
+ course you could use non-busybox versions of these programs, so
+ against my better judgement (since this will surely result in plenty
+ of support questions on the mailing list), I do not force you to
+ enable these additional options. It is up to you to supply either
+ "ifconfig", "route" and "run-parts" or the "ip" command, either
+ via busybox or via standalone utilities.
config BUSYBOX_CONFIG_IFDOWN
bool "ifdown"
default BUSYBOX_DEFAULT_IFDOWN
help
- Deactivate the specified interfaces.
+ Deactivate the specified interfaces.
config BUSYBOX_CONFIG_IFUPDOWN_IFSTATE_PATH
string "Absolute path to ifstate file"
default BUSYBOX_DEFAULT_IFUPDOWN_IFSTATE_PATH
depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN
help
- ifupdown keeps state information in a file called ifstate.
- Typically it is located in /var/run/ifstate, however
- some distributions tend to put it in other places
- (debian, for example, uses /etc/network/run/ifstate).
- This config option defines location of ifstate.
+ ifupdown keeps state information in a file called ifstate.
+ Typically it is located in /var/run/ifstate, however
+ some distributions tend to put it in other places
+ (debian, for example, uses /etc/network/run/ifstate).
+ This config option defines location of ifstate.
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
bool "Use ip tool (else ifconfig/route is used)"
default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IP
depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN
help
- Use the iproute "ip" command to implement "ifup" and "ifdown", rather
- than the default of using the older "ifconfig" and "route" utilities.
+ Use the iproute "ip" command to implement "ifup" and "ifdown", rather
+ than the default of using the older "ifconfig" and "route" utilities.
- If Y: you must install either the full-blown iproute2 package
- or enable "ip" applet in Busybox, or the "ifup" and "ifdown" applets
- will not work.
+ If Y: you must install either the full-blown iproute2 package
+ or enable "ip" applet in Busybox, or the "ifup" and "ifdown" applets
+ will not work.
- If N: you must install either the full-blown ifconfig and route
- utilities, or enable these applets in Busybox.
+ If N: you must install either the full-blown ifconfig and route
+ utilities, or enable these applets in Busybox.
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4
bool "Support IPv4"
default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV4
depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN
help
- If you want ifup/ifdown to talk IPv4, leave this on.
+ If you want ifup/ifdown to talk IPv4, leave this on.
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6
bool "Support IPv6"
default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV6
depends on (BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN) && BUSYBOX_CONFIG_FEATURE_IPV6
help
- If you need support for IPv6, turn this option on.
+ If you need support for IPv6, turn this option on.
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING
default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_MAPPING
depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN
help
- This enables support for the "mapping" stanza, unless you have
- a weird network setup you don't need it.
+ This enables support for the "mapping" stanza, unless you have
+ a weird network setup you don't need it.
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP
bool "Support external DHCP clients"
default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_EXTERNAL_DHCP
depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN
help
- This enables support for the external dhcp clients. Clients are
- tried in the following order: dhcpcd, dhclient, pump and udhcpc.
- Otherwise, if udhcpc applet is enabled, it is used.
- Otherwise, ifup/ifdown will have no support for DHCP.
+ This enables support for the external dhcp clients. Clients are
+ tried in the following order: dhcpcd, dhclient, pump and udhcpc.
+ Otherwise, if udhcpc applet is enabled, it is used.
+ Otherwise, ifup/ifdown will have no support for DHCP.
config BUSYBOX_CONFIG_INETD
bool "inetd"
default BUSYBOX_DEFAULT_INETD
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
- Internet superserver daemon
+ Internet superserver daemon
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
bool "Support echo service"
default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
depends on BUSYBOX_CONFIG_INETD
help
- Echo received data internal inetd service
+ Echo received data internal inetd service
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
bool "Support discard service"
default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
depends on BUSYBOX_CONFIG_INETD
help
- Internet /dev/null internal inetd service
+ Internet /dev/null internal inetd service
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME
bool "Support time service"
default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_TIME
depends on BUSYBOX_CONFIG_INETD
help
- Return 32 bit time since 1900 internal inetd service
+ Return 32 bit time since 1900 internal inetd service
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
bool "Support daytime service"
default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
depends on BUSYBOX_CONFIG_INETD
help
- Return human-readable time internal inetd service
+ Return human-readable time internal inetd service
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
bool "Support chargen service"
default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
depends on BUSYBOX_CONFIG_INETD
help
- Familiar character generator internal inetd service
+ Familiar character generator internal inetd service
config BUSYBOX_CONFIG_IP
bool "ip"
default BUSYBOX_DEFAULT_IP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- The "ip" applet is a TCP/IP interface configuration and routing
- utility. You generally don't need "ip" to use busybox with
- TCP/IP.
+ The "ip" applet is a TCP/IP interface configuration and routing
+ utility. You generally don't need "ip" to use busybox with
+ TCP/IP.
config BUSYBOX_CONFIG_IPADDR
bool "ipaddr"
select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Support short form of ip addr: ipaddr
+ Support short form of ip addr: ipaddr
config BUSYBOX_CONFIG_IPLINK
bool "iplink"
select BUSYBOX_CONFIG_FEATURE_IP_LINK
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Support short form of ip link: iplink
+ Support short form of ip link: iplink
config BUSYBOX_CONFIG_IPROUTE
bool "iproute"
select BUSYBOX_CONFIG_FEATURE_IP_ROUTE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Support short form of ip route: iproute
+ Support short form of ip route: iproute
config BUSYBOX_CONFIG_IPTUNNEL
bool "iptunnel"
select BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Support short form of ip tunnel: iptunnel
+ Support short form of ip tunnel: iptunnel
config BUSYBOX_CONFIG_IPRULE
bool "iprule"
select BUSYBOX_CONFIG_FEATURE_IP_RULE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Support short form of ip rule: iprule
+ Support short form of ip rule: iprule
config BUSYBOX_CONFIG_IPNEIGH
bool "ipneigh"
select BUSYBOX_CONFIG_FEATURE_IP_NEIGH
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Support short form of ip neigh: ipneigh
+ Support short form of ip neigh: ipneigh
config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
bool "ip address"
default BUSYBOX_DEFAULT_FEATURE_IP_ADDRESS
depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPADDR
help
- Address manipulation support for the "ip" applet.
+ Address manipulation support for the "ip" applet.
config BUSYBOX_CONFIG_FEATURE_IP_LINK
bool "ip link"
default BUSYBOX_DEFAULT_FEATURE_IP_LINK
depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPLINK
help
- Configure network devices with "ip".
+ Configure network devices with "ip".
config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
bool "ip route"
default BUSYBOX_DEFAULT_FEATURE_IP_ROUTE
depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPROUTE
help
- Add support for routing table management to "ip".
+ Add support for routing table management to "ip".
config BUSYBOX_CONFIG_FEATURE_IP_ROUTE_DIR
string "ip route configuration directory"
default BUSYBOX_DEFAULT_FEATURE_IP_ROUTE_DIR
depends on BUSYBOX_CONFIG_FEATURE_IP_ROUTE
help
- Location of the "ip" applet routing configuration.
+ Location of the "ip" applet routing configuration.
config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
bool "ip tunnel"
default BUSYBOX_DEFAULT_FEATURE_IP_TUNNEL
depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPTUNNEL
help
- Add support for tunneling commands to "ip".
+ Add support for tunneling commands to "ip".
config BUSYBOX_CONFIG_FEATURE_IP_RULE
bool "ip rule"
default BUSYBOX_DEFAULT_FEATURE_IP_RULE
depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPRULE
help
- Add support for rule commands to "ip".
+ Add support for rule commands to "ip".
config BUSYBOX_CONFIG_FEATURE_IP_NEIGH
bool "ip neighbor"
default BUSYBOX_DEFAULT_FEATURE_IP_NEIGH
depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPNEIGH
help
- Add support for neighbor commands to "ip".
+ Add support for neighbor commands to "ip".
config BUSYBOX_CONFIG_FEATURE_IP_RARE_PROTOCOLS
bool "Support displaying rarely used link types"
default BUSYBOX_DEFAULT_FEATURE_IP_RARE_PROTOCOLS
depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPADDR || BUSYBOX_CONFIG_IPLINK || BUSYBOX_CONFIG_IPROUTE || BUSYBOX_CONFIG_IPTUNNEL || BUSYBOX_CONFIG_IPRULE || BUSYBOX_CONFIG_IPNEIGH
help
- If you are not going to use links of type "frad", "econet",
- "bif" etc, you probably don't need to enable this.
- Ethernet, wireless, infrared, ppp/slip, ip tunnelling
- link types are supported without this option selected.
+ If you are not going to use links of type "frad", "econet",
+ "bif" etc, you probably don't need to enable this.
+ Ethernet, wireless, infrared, ppp/slip, ip tunnelling
+ link types are supported without this option selected.
config BUSYBOX_CONFIG_IPCALC
bool "ipcalc"
default BUSYBOX_DEFAULT_IPCALC
help
- ipcalc takes an IP address and netmask and calculates the
- resulting broadcast, network, and host range.
+ ipcalc takes an IP address and netmask and calculates the
+ resulting broadcast, network, and host range.
config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS
bool "Enable long options"
default BUSYBOX_DEFAULT_FEATURE_IPCALC_FANCY
depends on BUSYBOX_CONFIG_IPCALC
help
- Adds the options hostname, prefix and silent to the output of
- "ipcalc".
+ Adds the options hostname, prefix and silent to the output of
+ "ipcalc".
config BUSYBOX_CONFIG_FAKEIDENTD
bool "fakeidentd"
default BUSYBOX_DEFAULT_FAKEIDENTD
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
- fakeidentd listens on the ident port and returns a predefined
- fake value on any query.
+ fakeidentd listens on the ident port and returns a predefined
+ fake value on any query.
config BUSYBOX_CONFIG_NAMEIF
bool "nameif"
default BUSYBOX_DEFAULT_NAMEIF
select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
- nameif is used to rename network interface by its MAC address.
- Renamed interfaces MUST be in the down state.
- It is possible to use a file (default: /etc/mactab)
- with list of new interface names and MACs.
- Maximum interface name length: IFNAMSIZ = 16
- File fields are separated by space or tab.
- File format:
- # Comment
- new_interface_name XX:XX:XX:XX:XX:XX
+ nameif is used to rename network interface by its MAC address.
+ Renamed interfaces MUST be in the down state.
+ It is possible to use a file (default: /etc/mactab)
+ with list of new interface names and MACs.
+ Maximum interface name length: IFNAMSIZ = 16
+ File fields are separated by space or tab.
+ File format:
+ # Comment
+ new_interface_name XX:XX:XX:XX:XX:XX
config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED
bool "Extended nameif"
default BUSYBOX_DEFAULT_FEATURE_NAMEIF_EXTENDED
depends on BUSYBOX_CONFIG_NAMEIF
help
- This extends the nameif syntax to support the bus_info, driver,
- phyaddr selectors. The syntax is compatible to the normal nameif.
- File format:
+ This extends the nameif syntax to support the bus_info, driver,
+ phyaddr selectors. The syntax is compatible to the normal nameif.
+ File format:
new_interface_name driver=asix bus=usb-0000:00:08.2-3
new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5
new_interface_name phy_address=2 00:80:C8:38:91:B5
bool "nbd-client"
default BUSYBOX_DEFAULT_NBDCLIENT
help
- Network block device client
+ Network block device client
config BUSYBOX_CONFIG_NC
bool "nc"
default BUSYBOX_DEFAULT_NC
help
- A simple Unix utility which reads and writes data across network
- connections.
+ A simple Unix utility which reads and writes data across network
+ connections.
config BUSYBOX_CONFIG_NC_SERVER
bool "Netcat server options (-l)"
default BUSYBOX_DEFAULT_NC_SERVER
depends on BUSYBOX_CONFIG_NC
help
- Allow netcat to act as a server.
+ Allow netcat to act as a server.
config BUSYBOX_CONFIG_NC_EXTRA
bool "Netcat extensions (-eiw and -f FILE)"
default BUSYBOX_DEFAULT_NC_EXTRA
depends on BUSYBOX_CONFIG_NC
help
- Add -e (support for executing the rest of the command line after
- making or receiving a successful connection), -i (delay interval for
- lines sent), -w (timeout for initial connection).
+ Add -e (support for executing the rest of the command line after
+ making or receiving a successful connection), -i (delay interval for
+ lines sent), -w (timeout for initial connection).
config BUSYBOX_CONFIG_NC_110_COMPAT
bool "Netcat 1.10 compatibility (+2.5k)"
default BUSYBOX_DEFAULT_NC_110_COMPAT # off specially for Rob
depends on BUSYBOX_CONFIG_NC
help
- This option makes nc closely follow original nc-1.10.
- The code is about 2.5k bigger. It enables
- -s ADDR, -n, -u, -v, -o FILE, -z options, but loses
- busybox-specific extensions: -f FILE.
+ This option makes nc closely follow original nc-1.10.
+ The code is about 2.5k bigger. It enables
+ -s ADDR, -n, -u, -v, -o FILE, -z options, but loses
+ busybox-specific extensions: -f FILE.
config BUSYBOX_CONFIG_NETMSG
bool "netmsg"
default BUSYBOX_DEFAULT_NETMSG
help
- simple program for sending udp broadcast messages
+ simple program for sending udp broadcast messages
config BUSYBOX_CONFIG_NETSTAT
bool "netstat"
default BUSYBOX_DEFAULT_NETSTAT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- netstat prints information about the Linux networking subsystem.
+ netstat prints information about the Linux networking subsystem.
config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE
bool "Enable wide output"
default BUSYBOX_DEFAULT_FEATURE_NETSTAT_WIDE
depends on BUSYBOX_CONFIG_NETSTAT
help
- Add support for wide columns. Useful when displaying IPv6 addresses
- (-W option).
+ Add support for wide columns. Useful when displaying IPv6 addresses
+ (-W option).
config BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG
bool "Enable PID/Program name output"
default BUSYBOX_DEFAULT_FEATURE_NETSTAT_PRG
depends on BUSYBOX_CONFIG_NETSTAT
help
- Add support for -p flag to print out PID and program name.
- +700 bytes of code.
+ Add support for -p flag to print out PID and program name.
+ +700 bytes of code.
config BUSYBOX_CONFIG_NSLOOKUP
bool "nslookup"
default BUSYBOX_DEFAULT_NSLOOKUP
help
- nslookup is a tool to query Internet name servers.
+ nslookup is a tool to query Internet name servers.
config BUSYBOX_CONFIG_NSLOOKUP_OPENWRT
bool "nslookup_lede"
depends on !BUSYBOX_CONFIG_NSLOOKUP
default BUSYBOX_DEFAULT_NSLOOKUP_OPENWRT
help
- nslookup is a tool to query Internet name servers (OpenWrt flavor).
+ nslookup is a tool to query Internet name servers (OpenWrt flavor).
config BUSYBOX_CONFIG_FEATURE_NSLOOKUP_OPENWRT_LONG_OPTIONS
bool "Enable long options"
default BUSYBOX_DEFAULT_NTPD
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- The NTP client/server daemon.
+ The NTP client/server daemon.
config BUSYBOX_CONFIG_FEATURE_NTPD_SERVER
bool "Make ntpd usable as a NTP server"
default BUSYBOX_DEFAULT_FEATURE_NTPD_SERVER
depends on BUSYBOX_CONFIG_NTPD
help
- Make ntpd usable as a NTP server. If you disable this option
- ntpd will be usable only as a NTP client.
+ Make ntpd usable as a NTP server. If you disable this option
+ ntpd will be usable only as a NTP client.
config BUSYBOX_CONFIG_FEATURE_NTPD_CONF
bool "Make ntpd understand /etc/ntp.conf"
default BUSYBOX_DEFAULT_FEATURE_NTPD_CONF
depends on BUSYBOX_CONFIG_NTPD
help
- Make ntpd look in /etc/ntp.conf for peers. Only "server address"
- is supported.
+ Make ntpd look in /etc/ntp.conf for peers. Only "server address"
+ is supported.
config BUSYBOX_CONFIG_PING
bool "ping"
default BUSYBOX_DEFAULT_PING
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
- elicit an ICMP ECHO_RESPONSE from a host or gateway.
+ ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
+ elicit an ICMP ECHO_RESPONSE from a host or gateway.
config BUSYBOX_CONFIG_PING6
bool "ping6"
default BUSYBOX_DEFAULT_PING6
depends on BUSYBOX_CONFIG_FEATURE_IPV6
help
- This will give you a ping that can talk IPv6.
+ This will give you a ping that can talk IPv6.
config BUSYBOX_CONFIG_FEATURE_FANCY_PING
bool "Enable fancy ping output"
default BUSYBOX_DEFAULT_FEATURE_FANCY_PING
depends on BUSYBOX_CONFIG_PING || BUSYBOX_CONFIG_PING6
help
- Make the output from the ping applet include statistics, and at the
- same time provide full support for ICMP packets.
+ Make the output from the ping applet include statistics, and at the
+ same time provide full support for ICMP packets.
config BUSYBOX_CONFIG_PSCAN
bool "pscan"
default BUSYBOX_DEFAULT_PSCAN
help
- Simple network port scanner.
+ Simple network port scanner.
config BUSYBOX_CONFIG_ROUTE
bool "route"
default BUSYBOX_DEFAULT_ROUTE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Route displays or manipulates the kernel's IP routing tables.
+ Route displays or manipulates the kernel's IP routing tables.
config BUSYBOX_CONFIG_SLATTACH
bool "slattach"
default BUSYBOX_DEFAULT_SLATTACH
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- slattach is a small utility to attach network interfaces to serial
- lines.
+ slattach is a small utility to attach network interfaces to serial
+ lines.
config BUSYBOX_CONFIG_SSL_CLIENT
bool "ssl_client"
default BUSYBOX_DEFAULT_SSL_CLIENT
select BUSYBOX_CONFIG_TLS
help
- This tool pipes data to/from a socket, TLS-encrypting it.
+ This tool pipes data to/from a socket, TLS-encrypting it.
config BUSYBOX_CONFIG_TCPSVD
bool "tcpsvd"
default BUSYBOX_DEFAULT_TCPSVD
help
- tcpsvd listens on a TCP port and runs a program for each new
- connection.
+ tcpsvd listens on a TCP port and runs a program for each new
+ connection.
config BUSYBOX_CONFIG_UDPSVD
bool "udpsvd"
default BUSYBOX_DEFAULT_UDPSVD
help
- udpsvd listens on an UDP port and runs a program for each new
- connection.
+ udpsvd listens on an UDP port and runs a program for each new
+ connection.
config BUSYBOX_CONFIG_TELNET
bool "telnet"
default BUSYBOX_DEFAULT_TELNET
help
- Telnet is an interface to the TELNET protocol, but is also commonly
- used to test other simple protocols.
+ Telnet is an interface to the TELNET protocol, but is also commonly
+ used to test other simple protocols.
config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE
bool "Pass TERM type to remote host"
default BUSYBOX_DEFAULT_FEATURE_TELNET_TTYPE
depends on BUSYBOX_CONFIG_TELNET
help
- Setting this option will forward the TERM environment variable to the
- remote host you are connecting to. This is useful to make sure that
- things like ANSI colors and other control sequences behave.
+ Setting this option will forward the TERM environment variable to the
+ remote host you are connecting to. This is useful to make sure that
+ things like ANSI colors and other control sequences behave.
config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN
bool "Pass USER type to remote host"
default BUSYBOX_DEFAULT_FEATURE_TELNET_AUTOLOGIN
depends on BUSYBOX_CONFIG_TELNET
help
- Setting this option will forward the USER environment variable to the
- remote host you are connecting to. This is useful when you need to
- log into a machine without telling the username (autologin). This
- option enables `-a' and `-l USER' arguments.
+ Setting this option will forward the USER environment variable to the
+ remote host you are connecting to. This is useful when you need to
+ log into a machine without telling the username (autologin). This
+ option enables `-a' and `-l USER' arguments.
config BUSYBOX_CONFIG_FEATURE_TELNET_WIDTH
bool "Enable window size autodetection"
default BUSYBOX_DEFAULT_TELNETD
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
- A daemon for the TELNET protocol, allowing you to log onto the host
- running the daemon. Please keep in mind that the TELNET protocol
- sends passwords in plain text. If you can't afford the space for an
- SSH daemon and you trust your network, you may say 'y' here. As a
- more secure alternative, you should seriously consider installing the
- very small Dropbear SSH daemon instead:
+ A daemon for the TELNET protocol, allowing you to log onto the host
+ running the daemon. Please keep in mind that the TELNET protocol
+ sends passwords in plain text. If you can't afford the space for an
+ SSH daemon and you trust your network, you may say 'y' here. As a
+ more secure alternative, you should seriously consider installing the
+ very small Dropbear SSH daemon instead:
http://matt.ucc.asn.au/dropbear/dropbear.html
- Note that for busybox telnetd to work you need several things:
- First of all, your kernel needs:
+ Note that for busybox telnetd to work you need several things:
+ First of all, your kernel needs:
CONFIG_UNIX98_PTYS=y
- Next, you need a /dev/pts directory on your root filesystem:
+ Next, you need a /dev/pts directory on your root filesystem:
$ ls -ld /dev/pts
drwxr-xr-x 2 root root 0 Sep 23 13:21 /dev/pts/
- Next you need the pseudo terminal master multiplexer /dev/ptmx:
+ Next you need the pseudo terminal master multiplexer /dev/ptmx:
$ ls -la /dev/ptmx
crw-rw-rw- 1 root tty 5, 2 Sep 23 13:55 /dev/ptmx
- Any /dev/ttyp[0-9]* files you may have can be removed.
- Next, you need to mount the devpts filesystem on /dev/pts using:
+ Any /dev/ttyp[0-9]* files you may have can be removed.
+ Next, you need to mount the devpts filesystem on /dev/pts using:
mount -t devpts devpts /dev/pts
- You need to be sure that busybox has LOGIN and
- FEATURE_SUID enabled. And finally, you should make
- certain that Busybox has been installed setuid root:
+ You need to be sure that busybox has LOGIN and
+ FEATURE_SUID enabled. And finally, you should make
+ certain that Busybox has been installed setuid root:
chown root.root /bin/busybox
chmod 4755 /bin/busybox
- with all that done, telnetd _should_ work....
+ with all that done, telnetd _should_ work....
config BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
bool "Support standalone telnetd (not inetd only)"
default BUSYBOX_DEFAULT_FEATURE_TELNETD_STANDALONE
depends on BUSYBOX_CONFIG_TELNETD
help
- Selecting this will make telnetd able to run standalone.
+ Selecting this will make telnetd able to run standalone.
config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD_WAIT
bool "Support -w SEC option (inetd wait mode)"
default BUSYBOX_DEFAULT_FEATURE_TELNETD_INETD_WAIT
depends on BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
help
- This option allows you to run telnetd in "inet wait" mode.
- Example inetd.conf line (note "wait", not usual "nowait"):
+ This option allows you to run telnetd in "inet wait" mode.
+ Example inetd.conf line (note "wait", not usual "nowait"):
- telnet stream tcp wait root /bin/telnetd telnetd -w10
+ telnet stream tcp wait root /bin/telnetd telnetd -w10
- In this example, inetd passes _listening_ socket_ as fd 0
- to telnetd when connection appears.
- telnetd will wait for connections until all existing
- connections are closed, and no new connections
- appear during 10 seconds. Then it exits, and inetd continues
- to listen for new connections.
+ In this example, inetd passes _listening_ socket_ as fd 0
+ to telnetd when connection appears.
+ telnetd will wait for connections until all existing
+ connections are closed, and no new connections
+ appear during 10 seconds. Then it exits, and inetd continues
+ to listen for new connections.
- This option is rarely used. "tcp nowait" is much more usual
- way of running tcp services, including telnetd.
- You most probably want to say N here.
+ This option is rarely used. "tcp nowait" is much more usual
+ way of running tcp services, including telnetd.
+ You most probably want to say N here.
config BUSYBOX_CONFIG_TFTP
bool "tftp"
default BUSYBOX_DEFAULT_TFTP
help
- This enables the Trivial File Transfer Protocol client program. TFTP
- is usually used for simple, small transfers such as a root image
- for a network-enabled bootloader.
+ This enables the Trivial File Transfer Protocol client program. TFTP
+ is usually used for simple, small transfers such as a root image
+ for a network-enabled bootloader.
config BUSYBOX_CONFIG_TFTPD
bool "tftpd"
default BUSYBOX_DEFAULT_TFTPD
help
- This enables the Trivial File Transfer Protocol server program.
- It expects that stdin is a datagram socket and a packet
- is already pending on it. It will exit after one transfer.
- In other words: it should be run from inetd in nowait mode,
- or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
+ This enables the Trivial File Transfer Protocol server program.
+ It expects that stdin is a datagram socket and a packet
+ is already pending on it. It will exit after one transfer.
+ In other words: it should be run from inetd in nowait mode,
+ or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
comment "Common options for tftp/tftpd"
depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
default BUSYBOX_DEFAULT_FEATURE_TFTP_GET
depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
help
- Add support for the GET command within the TFTP client. This allows
- a client to retrieve a file from a TFTP server.
- Also enable upload support in tftpd, if tftpd is selected.
+ Add support for the GET command within the TFTP client. This allows
+ a client to retrieve a file from a TFTP server.
+ Also enable upload support in tftpd, if tftpd is selected.
- Note: this option does _not_ make tftpd capable of download
- (the usual operation people need from it)!
+ Note: this option does _not_ make tftpd capable of download
+ (the usual operation people need from it)!
config BUSYBOX_CONFIG_FEATURE_TFTP_PUT
bool "Enable 'tftp put' and/or tftpd download code"
default BUSYBOX_DEFAULT_FEATURE_TFTP_PUT
depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
help
- Add support for the PUT command within the TFTP client. This allows
- a client to transfer a file to a TFTP server.
- Also enable download support in tftpd, if tftpd is selected.
+ Add support for the PUT command within the TFTP client. This allows
+ a client to transfer a file to a TFTP server.
+ Also enable download support in tftpd, if tftpd is selected.
config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
bool "Enable 'blksize' and 'tsize' protocol options"
default BUSYBOX_DEFAULT_FEATURE_TFTP_BLOCKSIZE
depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
help
- Allow tftp to specify block size, and tftpd to understand
- "blksize" and "tsize" options.
+ Allow tftp to specify block size, and tftpd to understand
+ "blksize" and "tsize" options.
config BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR
bool "Enable progress bar"
default BUSYBOX_DEFAULT_TFTP_DEBUG
depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
help
- Make tftp[d] print debugging messages on stderr.
- This is useful if you are diagnosing a bug in tftp[d].
+ Make tftp[d] print debugging messages on stderr.
+ This is useful if you are diagnosing a bug in tftp[d].
config BUSYBOX_CONFIG_TLS
bool #No description makes it a hidden option
default BUSYBOX_DEFAULT_TLS
default BUSYBOX_DEFAULT_TRACEROUTE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Utility to trace the route of IP packets.
+ Utility to trace the route of IP packets.
config BUSYBOX_CONFIG_TRACEROUTE6
bool "traceroute6"
default BUSYBOX_DEFAULT_TRACEROUTE6
depends on BUSYBOX_CONFIG_FEATURE_IPV6
help
- Utility to trace the route of IPv6 packets.
+ Utility to trace the route of IPv6 packets.
config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE
bool "Enable verbose output"
default BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_VERBOSE
depends on BUSYBOX_CONFIG_TRACEROUTE || BUSYBOX_CONFIG_TRACEROUTE6
help
- Add some verbosity to traceroute. This includes among other things
- hostnames and ICMP response types.
+ Add some verbosity to traceroute. This includes among other things
+ hostnames and ICMP response types.
config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP
bool "Enable -I option (use ICMP instead of UDP)"
default BUSYBOX_DEFAULT_TUNCTL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- tunctl creates or deletes tun devices.
+ tunctl creates or deletes tun devices.
config BUSYBOX_CONFIG_FEATURE_TUNCTL_UG
bool "Support owner:group assignment"
default BUSYBOX_DEFAULT_FEATURE_TUNCTL_UG
depends on BUSYBOX_CONFIG_TUNCTL
help
- Allow to specify owner and group of newly created interface.
- 340 bytes of pure bloat. Say no here.
+ Allow to specify owner and group of newly created interface.
+ 340 bytes of pure bloat. Say no here.
config BUSYBOX_CONFIG_VCONFIG
bool "vconfig"
default BUSYBOX_DEFAULT_VCONFIG
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Creates, removes, and configures VLAN interfaces
+ Creates, removes, and configures VLAN interfaces
config BUSYBOX_CONFIG_WGET
bool "wget"
default BUSYBOX_DEFAULT_WGET
help
- wget is a utility for non-interactive download of files from HTTP
- and FTP servers.
+ wget is a utility for non-interactive download of files from HTTP
+ and FTP servers.
config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS
bool "Enable long options"
default BUSYBOX_DEFAULT_FEATURE_WGET_AUTHENTICATION
depends on BUSYBOX_CONFIG_WGET
help
- Support authenticated HTTP transfers.
+ Support authenticated HTTP transfers.
config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT
bool "Enable timeout option -T SEC"
default BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT
depends on BUSYBOX_CONFIG_WGET
help
- Supports network read and connect timeouts for wget,
- so that wget will give up and timeout, through the -T
- command line option.
+ Supports network read and connect timeouts for wget,
+ so that wget will give up and timeout, through the -T
+ command line option.
- Currently only connect and network data read timeout are
- supported (i.e., timeout is not applied to the DNS query). When
- FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option
- will work in addition to -T.
+ Currently only connect and network data read timeout are
+ supported (i.e., timeout is not applied to the DNS query). When
+ FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option
+ will work in addition to -T.
config BUSYBOX_CONFIG_FEATURE_WGET_HTTPS
bool "Support HTTPS using internal TLS code"
depends on BUSYBOX_CONFIG_WGET
select BUSYBOX_CONFIG_TLS
help
- wget will use internal TLS code to connect to https:// URLs.
- Note:
- On NOMMU machines, ssl_helper applet should be available
- in the $PATH for this to work. Make sure to select that applet.
-
- Note: currently, TLS code only makes TLS I/O work, it
- does *not* check that the peer is who it claims to be, etc.
- IOW: it uses peer-supplied public keys to establish encryption
- and signing keys, then encrypts and signs outgoing data and
- decrypts incoming data.
- It does not check signature hashes on the incoming data:
- this means that attackers manipulating TCP packets can
- send altered data and we unknowingly receive garbage.
- (This check might be relatively easy to add).
- It does not check public key's certificate:
- this means that the peer may be an attacker impersonating
- the server we think we are talking to.
-
- If you think this is unacceptable, consider this. As more and more
- servers switch to HTTPS-only operation, without such "crippled"
- TLS code it is *impossible* to simply download a kernel source
- from kernel.org. Which can in real world translate into
- "my small automatic tooling to build cross-compilers from sources
- no longer works, I need to additionally keep a local copy
- of ~4 megabyte source tarball of a SSL library and ~2 megabyte
- source of wget, need to compile and built both before I can
- download anything. All this despite the fact that the build
- is done in a QEMU sandbox on a machine with absolutely nothing
- worth stealing, so I don't care if someone would go to a lot
- of trouble to intercept my HTTPS download to send me an altered
- kernel tarball".
-
- If you still think this is unacceptable, send patches.
-
- If you still think this is unacceptable, do not want to send
- patches, but do want to waste bandwidth expaining how wrong
- it is, you will be ignored.
+ wget will use internal TLS code to connect to https:// URLs.
+ Note:
+ On NOMMU machines, ssl_helper applet should be available
+ in the $PATH for this to work. Make sure to select that applet.
+
+ Note: currently, TLS code only makes TLS I/O work, it
+ does *not* check that the peer is who it claims to be, etc.
+ IOW: it uses peer-supplied public keys to establish encryption
+ and signing keys, then encrypts and signs outgoing data and
+ decrypts incoming data.
+ It does not check signature hashes on the incoming data:
+ this means that attackers manipulating TCP packets can
+ send altered data and we unknowingly receive garbage.
+ (This check might be relatively easy to add).
+ It does not check public key's certificate:
+ this means that the peer may be an attacker impersonating
+ the server we think we are talking to.
+
+ If you think this is unacceptable, consider this. As more and more
+ servers switch to HTTPS-only operation, without such "crippled"
+ TLS code it is *impossible* to simply download a kernel source
+ from kernel.org. Which can in real world translate into
+ "my small automatic tooling to build cross-compilers from sources
+ no longer works, I need to additionally keep a local copy
+ of ~4 megabyte source tarball of a SSL library and ~2 megabyte
+ source of wget, need to compile and built both before I can
+ download anything. All this despite the fact that the build
+ is done in a QEMU sandbox on a machine with absolutely nothing
+ worth stealing, so I don't care if someone would go to a lot
+ of trouble to intercept my HTTPS download to send me an altered
+ kernel tarball".
+
+ If you still think this is unacceptable, send patches.
+
+ If you still think this is unacceptable, do not want to send
+ patches, but do want to waste bandwidth expaining how wrong
+ it is, you will be ignored.
config BUSYBOX_CONFIG_FEATURE_WGET_OPENSSL
bool "Try to connect to HTTPS using openssl"
default BUSYBOX_DEFAULT_FEATURE_WGET_OPENSSL
depends on BUSYBOX_CONFIG_WGET
help
- Try to use openssl to handle HTTPS.
-
- OpenSSL has a simple SSL client for debug purposes.
- If you select this option, wget will effectively run:
- "openssl s_client -quiet -connect hostname:443
- -servername hostname 2>/dev/null" and pipe its data
- through it. -servername is not used if hostname is numeric.
- Note inconvenient API: host resolution is done twice,
- and there is no guarantee openssl's idea of IPv6 address
- format is the same as ours.
- Another problem is that s_client prints debug information
- to stderr, and it needs to be suppressed. This means
- all error messages get suppressed too.
- openssl is also a big binary, often dynamically linked
- against ~15 libraries.
-
- If openssl can't be executed, internal TLS code will be used
- (if you enabled it); if openssl can be executed but fails later,
- wget can't detect this, and download will fail.
+ Try to use openssl to handle HTTPS.
+
+ OpenSSL has a simple SSL client for debug purposes.
+ If you select this option, wget will effectively run:
+ "openssl s_client -quiet -connect hostname:443
+ -servername hostname 2>/dev/null" and pipe its data
+ through it. -servername is not used if hostname is numeric.
+ Note inconvenient API: host resolution is done twice,
+ and there is no guarantee openssl's idea of IPv6 address
+ format is the same as ours.
+ Another problem is that s_client prints debug information
+ to stderr, and it needs to be suppressed. This means
+ all error messages get suppressed too.
+ openssl is also a big binary, often dynamically linked
+ against ~15 libraries.
+
+ If openssl can't be executed, internal TLS code will be used
+ (if you enabled it); if openssl can be executed but fails later,
+ wget can't detect this, and download will fail.
config BUSYBOX_CONFIG_WHOIS
bool "whois"
default BUSYBOX_DEFAULT_WHOIS
help
- whois is a client for the whois directory service
+ whois is a client for the whois directory service
config BUSYBOX_CONFIG_ZCIP
bool "zcip"
default BUSYBOX_DEFAULT_ZCIP
select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
- ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
- It's a daemon that allocates and defends a dynamically assigned
- address on the 169.254/16 network, requiring no system administrator.
+ ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
+ It's a daemon that allocates and defends a dynamically assigned
+ address on the 169.254/16 network, requiring no system administrator.
- See http://www.zeroconf.org for further details, and "zcip.script"
- in the busybox examples.
+ See http://www.zeroconf.org for further details, and "zcip.script"
+ in the busybox examples.
source udhcp/Config.in
default BUSYBOX_DEFAULT_IFUPDOWN_UDHCPC_CMD_OPTIONS
depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN
help
- Command line options to pass to udhcpc from ifup.
- Intended to alter options not available in /etc/network/interfaces.
- (IE: --syslog --background etc...)
+ Command line options to pass to udhcpc from ifup.
+ Intended to alter options not available in /etc/network/interfaces.
+ (IE: --syslog --background etc...)
endmenu
default BUSYBOX_DEFAULT_UDHCPC6 # not yet ready
depends on BUSYBOX_CONFIG_FEATURE_IPV6
help
- udhcpc6 is a DHCPv6 client
+ udhcpc6 is a DHCPv6 client
config BUSYBOX_CONFIG_FEATURE_UDHCPC6_RFC3646
bool "Support RFC 3646 (DNS server and search list)"
default BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC3646
depends on BUSYBOX_CONFIG_UDHCPC6
help
- List of DNS servers and domain search list can be requested with
- "-O dns" and "-O search". If server gives these values,
- they will be set in environment variables "dns" and "search".
+ List of DNS servers and domain search list can be requested with
+ "-O dns" and "-O search". If server gives these values,
+ they will be set in environment variables "dns" and "search".
config BUSYBOX_CONFIG_FEATURE_UDHCPC6_RFC4704
bool "Support RFC 4704 (Client FQDN)"
default BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC4704
depends on BUSYBOX_CONFIG_UDHCPC6
help
- You can request FQDN to be given by server using "-O fqdn".
+ You can request FQDN to be given by server using "-O fqdn".
config BUSYBOX_CONFIG_FEATURE_UDHCPC6_RFC4833
bool "Support RFC 4833 (Timezones)"
default BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC4833
depends on BUSYBOX_CONFIG_UDHCPC6
help
- You can request POSIX timezone with "-O tz" and timezone name
- with "-O timezone".
+ You can request POSIX timezone with "-O tz" and timezone name
+ with "-O timezone".
config BUSYBOX_CONFIG_UDHCPD
bool "udhcpd (DHCP server)"
default BUSYBOX_DEFAULT_UDHCPD
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- udhcpd is a DHCP server geared primarily toward embedded systems,
- while striving to be fully functional and RFC compliant.
+ udhcpd is a DHCP server geared primarily toward embedded systems,
+ while striving to be fully functional and RFC compliant.
config BUSYBOX_CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY
bool "Rewrite the lease file at every new acknowledge"
default BUSYBOX_DEFAULT_FEATURE_UDHCPD_WRITE_LEASES_EARLY
depends on BUSYBOX_CONFIG_UDHCPD
help
- If selected, udhcpd will write a new file with leases every
- time a new lease has been accepted, thus eliminating the need
- to send SIGUSR1 for the initial writing or updating. Any timed
- rewriting remains undisturbed.
+ If selected, udhcpd will write a new file with leases every
+ time a new lease has been accepted, thus eliminating the need
+ to send SIGUSR1 for the initial writing or updating. Any timed
+ rewriting remains undisturbed.
config BUSYBOX_CONFIG_FEATURE_UDHCPD_BASE_IP_ON_MAC
bool "Select IP address based on client MAC"
default BUSYBOX_DEFAULT_FEATURE_UDHCPD_BASE_IP_ON_MAC
depends on BUSYBOX_CONFIG_UDHCPD
help
- If selected, udhcpd will base its selection of IP address to offer
- on the client's hardware address. Otherwise udhcpd uses the next
- consecutive free address.
+ If selected, udhcpd will base its selection of IP address to offer
+ on the client's hardware address. Otherwise udhcpd uses the next
+ consecutive free address.
- This reduces the frequency of IP address changes for clients
- which let their lease expire, and makes consecutive DHCPOFFERS
- for the same client to (almost always) contain the same
- IP address.
+ This reduces the frequency of IP address changes for clients
+ which let their lease expire, and makes consecutive DHCPOFFERS
+ for the same client to (almost always) contain the same
+ IP address.
config BUSYBOX_CONFIG_DHCPD_LEASES_FILE
string "Absolute path to lease file"
default BUSYBOX_DEFAULT_DHCPD_LEASES_FILE
depends on BUSYBOX_CONFIG_UDHCPD
help
- udhcpd stores addresses in a lease file. This is the absolute path
- of the file. Normally it is safe to leave it untouched.
+ udhcpd stores addresses in a lease file. This is the absolute path
+ of the file. Normally it is safe to leave it untouched.
config BUSYBOX_CONFIG_DUMPLEASES
bool "dumpleases"
default BUSYBOX_DEFAULT_DUMPLEASES
help
- dumpleases displays the leases written out by the udhcpd.
- Lease times are stored in the file by time remaining in lease, or
- by the absolute time that it expires in seconds from epoch.
+ dumpleases displays the leases written out by the udhcpd.
+ Lease times are stored in the file by time remaining in lease, or
+ by the absolute time that it expires in seconds from epoch.
config BUSYBOX_CONFIG_DHCPRELAY
bool "dhcprelay"
default BUSYBOX_DEFAULT_DHCPRELAY
help
- dhcprelay listens for dhcp requests on one or more interfaces
- and forwards these requests to a different interface or dhcp
- server.
+ dhcprelay listens for dhcp requests on one or more interfaces
+ and forwards these requests to a different interface or dhcp
+ server.
config BUSYBOX_CONFIG_UDHCPC
bool "udhcpc (DHCP client)"
default BUSYBOX_DEFAULT_UDHCPC
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- udhcpc is a DHCP client geared primarily toward embedded systems,
- while striving to be fully functional and RFC compliant.
+ udhcpc is a DHCP client geared primarily toward embedded systems,
+ while striving to be fully functional and RFC compliant.
- The udhcp client negotiates a lease with the DHCP server and
- runs a script when a lease is obtained or lost.
+ The udhcp client negotiates a lease with the DHCP server and
+ runs a script when a lease is obtained or lost.
config BUSYBOX_CONFIG_FEATURE_UDHCPC_ARPING
bool "Verify that the offered address is free, using ARP ping"
default BUSYBOX_DEFAULT_FEATURE_UDHCPC_ARPING
depends on BUSYBOX_CONFIG_UDHCPC
help
- If selected, udhcpc will send ARP probes and make sure
- the offered address is really not in use by anyone. The client
- will DHCPDECLINE the offer if the address is in use,
- and restart the discover process.
+ If selected, udhcpc will send ARP probes and make sure
+ the offered address is really not in use by anyone. The client
+ will DHCPDECLINE the offer if the address is in use,
+ and restart the discover process.
config BUSYBOX_CONFIG_FEATURE_UDHCPC_SANITIZEOPT
bool "Do not pass malformed host and domain names"
default BUSYBOX_DEFAULT_FEATURE_UDHCPC_SANITIZEOPT
depends on BUSYBOX_CONFIG_UDHCPC
help
- If selected, udhcpc will check some options (such as option 12 -
- hostname) and if they don't look like valid hostnames
- (for example, if they start with dash or contain spaces),
- they will be replaced with string "bad" when exporting
- to the environment.
+ If selected, udhcpc will check some options (such as option 12 -
+ hostname) and if they don't look like valid hostnames
+ (for example, if they start with dash or contain spaces),
+ they will be replaced with string "bad" when exporting
+ to the environment.
config BUSYBOX_CONFIG_UDHCPC_DEFAULT_SCRIPT
string "Absolute path to config script"
default BUSYBOX_DEFAULT_UDHCPC_DEFAULT_SCRIPT
depends on BUSYBOX_CONFIG_UDHCPC
help
- This script is called after udhcpc receives an answer. See
- examples/udhcp for a working example. Normally it is safe
- to leave this untouched.
+ This script is called after udhcpc receives an answer. See
+ examples/udhcp for a working example. Normally it is safe
+ to leave this untouched.
config BUSYBOX_CONFIG_FEATURE_UDHCP_PORT
bool "Enable '-P port' option for udhcpd and udhcpc"
default BUSYBOX_DEFAULT_FEATURE_UDHCP_PORT
depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
help
- At the cost of ~300 bytes, enables -P port option.
- This feature is typically not needed.
+ At the cost of ~300 bytes, enables -P port option.
+ This feature is typically not needed.
config BUSYBOX_CONFIG_UDHCP_DEBUG
int "Maximum verbosity level for udhcp applets (0..9)"
range 0 9
depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC || BUSYBOX_CONFIG_DHCPRELAY
help
- Verbosity can be increased with multiple -v options.
- This option controls how high it can be cranked up.
+ Verbosity can be increased with multiple -v options.
+ This option controls how high it can be cranked up.
- Bigger values result in bigger code. Levels above 1
- are very verbose and useful for debugging only.
+ Bigger values result in bigger code. Levels above 1
+ are very verbose and useful for debugging only.
config BUSYBOX_CONFIG_FEATURE_UDHCP_RFC3397
bool "Support RFC3397 domain search (experimental)"
default BUSYBOX_DEFAULT_FEATURE_UDHCP_RFC3397
depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
help
- If selected, both client and server will support passing of domain
- search lists via option 119, specified in RFC 3397,
- and SIP servers option 120, specified in RFC 3361.
+ If selected, both client and server will support passing of domain
+ search lists via option 119, specified in RFC 3397,
+ and SIP servers option 120, specified in RFC 3361.
config BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q
bool "Support 802.1Q VLAN parameters"
default BUSYBOX_DEFAULT_FEATURE_UDHCP_8021Q
depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
help
- If selected, both client and server will support passing of VLAN
- ID and priority via options 132 and 133 as per 802.1Q.
+ If selected, both client and server will support passing of VLAN
+ ID and priority via options 132 and 133 as per 802.1Q.
config BUSYBOX_CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS
int "DHCP options slack buffer size"
range 0 924
depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
help
- Some buggy DHCP servers send DHCP offer packets with option
- field larger than we expect (which might also be considered a
- buffer overflow attempt). These packets are normally discarded.
- If circumstances beyond your control force you to support such
- servers, this may help. The upper limit (924) makes dhcpc accept
- even 1500 byte packets (maximum-sized ethernet packets).
+ Some buggy DHCP servers send DHCP offer packets with option
+ field larger than we expect (which might also be considered a
+ buffer overflow attempt). These packets are normally discarded.
+ If circumstances beyond your control force you to support such
+ servers, this may help. The upper limit (924) makes dhcpc accept
+ even 1500 byte packets (maximum-sized ethernet packets).
- This option does not make dhcp[cd] emit non-standard
- sized packets.
+ This option does not make dhcp[cd] emit non-standard
+ sized packets.
- Known buggy DHCP servers:
- 3Com OfficeConnect Remote 812 ADSL Router:
+ Known buggy DHCP servers:
+ 3Com OfficeConnect Remote 812 ADSL Router:
seems to confuse maximum allowed UDP packet size with
maximum size of entire IP packet, and sends packets which are
28 bytes too large.
- Seednet (ISP) VDSL: sends packets 2 bytes too large.
+ Seednet (ISP) VDSL: sends packets 2 bytes too large.
bool "lpd"
default BUSYBOX_DEFAULT_LPD
help
- lpd is a print spooling daemon.
+ lpd is a print spooling daemon.
config BUSYBOX_CONFIG_LPR
bool "lpr"
default BUSYBOX_DEFAULT_LPR
help
- lpr sends files (or standard input) to a print spooling daemon.
+ lpr sends files (or standard input) to a print spooling daemon.
config BUSYBOX_CONFIG_LPQ
bool "lpq"
default BUSYBOX_DEFAULT_LPQ
help
- lpq is a print spool queue examination and manipulation program.
+ lpq is a print spool queue examination and manipulation program.
endmenu
default BUSYBOX_DEFAULT_FREE
select BUSYBOX_CONFIG_PLATFORM_LINUX #sysinfo()
help
- free displays the total amount of free and used physical and swap
- memory in the system, as well as the buffers used by the kernel.
- The shared memory column should be ignored; it is obsolete.
+ free displays the total amount of free and used physical and swap
+ memory in the system, as well as the buffers used by the kernel.
+ The shared memory column should be ignored; it is obsolete.
config BUSYBOX_CONFIG_FUSER
bool "fuser"
default BUSYBOX_DEFAULT_FUSER
help
- fuser lists all PIDs (Process IDs) that currently have a given
- file open. fuser can also list all PIDs that have a given network
- (TCP or UDP) port open.
+ fuser lists all PIDs (Process IDs) that currently have a given
+ file open. fuser can also list all PIDs that have a given network
+ (TCP or UDP) port open.
config BUSYBOX_CONFIG_IOSTAT
bool "iostat"
default BUSYBOX_DEFAULT_IOSTAT
help
- Report CPU and I/O statistics
+ Report CPU and I/O statistics
config BUSYBOX_CONFIG_KILL
bool "kill"
default BUSYBOX_DEFAULT_KILL
help
- The command kill sends the specified signal to the specified
- process or process group. If no signal is specified, the TERM
- signal is sent.
+ The command kill sends the specified signal to the specified
+ process or process group. If no signal is specified, the TERM
+ signal is sent.
config BUSYBOX_CONFIG_KILLALL
bool "killall"
default BUSYBOX_DEFAULT_KILLALL
help
- killall sends a signal to all processes running any of the
- specified commands. If no signal name is specified, SIGTERM is
- sent.
+ killall sends a signal to all processes running any of the
+ specified commands. If no signal name is specified, SIGTERM is
+ sent.
config BUSYBOX_CONFIG_KILLALL5
bool "killall5"
default BUSYBOX_DEFAULT_KILLALL5
help
- The SystemV killall command. killall5 sends a signal
- to all processes except kernel threads and the processes
- in its own session, so it won't kill the shell that is running
- the script it was called from.
+ The SystemV killall command. killall5 sends a signal
+ to all processes except kernel threads and the processes
+ in its own session, so it won't kill the shell that is running
+ the script it was called from.
config BUSYBOX_CONFIG_LSOF
bool "lsof"
default BUSYBOX_DEFAULT_LSOF
help
- Show open files in the format of:
- PID <TAB> /path/to/executable <TAB> /path/to/opened/file
+ Show open files in the format of:
+ PID <TAB> /path/to/executable <TAB> /path/to/opened/file
config BUSYBOX_CONFIG_MPSTAT
bool "mpstat"
default BUSYBOX_DEFAULT_MPSTAT
help
- Per-processor statistics
+ Per-processor statistics
config BUSYBOX_CONFIG_NMETER
bool "nmeter"
default BUSYBOX_DEFAULT_NMETER
help
- Prints selected system stats continuously, one line per update.
+ Prints selected system stats continuously, one line per update.
config BUSYBOX_CONFIG_PGREP
bool "pgrep"
default BUSYBOX_DEFAULT_PGREP
help
- Look for processes by name.
+ Look for processes by name.
config BUSYBOX_CONFIG_PKILL
bool "pkill"
default BUSYBOX_DEFAULT_PKILL
help
- Send signals to processes by name.
+ Send signals to processes by name.
config BUSYBOX_CONFIG_PIDOF
bool "pidof"
default BUSYBOX_DEFAULT_PIDOF
help
- Pidof finds the process id's (pids) of the named programs. It prints
- those id's on the standard output.
+ Pidof finds the process id's (pids) of the named programs. It prints
+ those id's on the standard output.
config BUSYBOX_CONFIG_FEATURE_PIDOF_SINGLE
bool "Enable single shot (-s)"
default BUSYBOX_DEFAULT_FEATURE_PIDOF_SINGLE
depends on BUSYBOX_CONFIG_PIDOF
help
- Support '-s' for returning only the first pid found.
+ Support '-s' for returning only the first pid found.
config BUSYBOX_CONFIG_FEATURE_PIDOF_OMIT
bool "Enable omitting pids (-o PID)"
default BUSYBOX_DEFAULT_FEATURE_PIDOF_OMIT
depends on BUSYBOX_CONFIG_PIDOF
help
- Support '-o PID' for omitting the given pid(s) in output.
- The special pid %PPID can be used to name the parent process
- of the pidof, in other words the calling shell or shell script.
+ Support '-o PID' for omitting the given pid(s) in output.
+ The special pid %PPID can be used to name the parent process
+ of the pidof, in other words the calling shell or shell script.
config BUSYBOX_CONFIG_PMAP
bool "pmap"
default BUSYBOX_DEFAULT_PMAP
bool "powertop"
default BUSYBOX_DEFAULT_POWERTOP
help
- Analyze power consumption on Intel-based laptops
+ Analyze power consumption on Intel-based laptops
config BUSYBOX_CONFIG_FEATURE_POWERTOP_INTERACTIVE
bool "Accept keyboard commands"
default BUSYBOX_DEFAULT_FEATURE_POWERTOP_INTERACTIVE
depends on BUSYBOX_CONFIG_POWERTOP
help
- Without this, powertop will only refresh display every 10 seconds.
- No keyboard commands will work, only ^C to terminate.
+ Without this, powertop will only refresh display every 10 seconds.
+ No keyboard commands will work, only ^C to terminate.
config BUSYBOX_CONFIG_PS
bool "ps"
default BUSYBOX_DEFAULT_PS
help
- ps gives a snapshot of the current processes.
+ ps gives a snapshot of the current processes.
config BUSYBOX_CONFIG_FEATURE_PS_WIDE
bool "Enable wide output option (-w)"
default BUSYBOX_DEFAULT_FEATURE_PS_WIDE
depends on BUSYBOX_CONFIG_PS && !BUSYBOX_CONFIG_DESKTOP
help
- Support argument 'w' for wide output.
- If given once, 132 chars are printed, and if given more
- than once, the length is unlimited.
+ Support argument 'w' for wide output.
+ If given once, 132 chars are printed, and if given more
+ than once, the length is unlimited.
config BUSYBOX_CONFIG_FEATURE_PS_LONG
bool "Enable long output option (-l)"
default BUSYBOX_DEFAULT_FEATURE_PS_LONG
depends on BUSYBOX_CONFIG_PS && !BUSYBOX_CONFIG_DESKTOP
help
- Support argument 'l' for long output.
- Adds fields PPID, RSS, START, TIME & TTY
+ Support argument 'l' for long output.
+ Adds fields PPID, RSS, START, TIME & TTY
config BUSYBOX_CONFIG_FEATURE_PS_TIME
bool "Support -o time and -o etime output specifiers"
default BUSYBOX_DEFAULT_FEATURE_PS_UNUSUAL_SYSTEMS
depends on BUSYBOX_CONFIG_FEATURE_PS_TIME
help
- Include support for measuring HZ on old kernels and non-ELF systems
- (if you are on Linux 2.4.0+ and use ELF, you don't need this)
+ Include support for measuring HZ on old kernels and non-ELF systems
+ (if you are on Linux 2.4.0+ and use ELF, you don't need this)
config BUSYBOX_CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS
bool "Support -o rgroup, -o ruser, -o nice specifiers"
bool "pstree"
default BUSYBOX_DEFAULT_PSTREE
help
- Display a tree of processes.
+ Display a tree of processes.
config BUSYBOX_CONFIG_PWDX
bool "pwdx"
default BUSYBOX_DEFAULT_PWDX
help
- Report current working directory of a process
+ Report current working directory of a process
config BUSYBOX_CONFIG_SMEMCAP
bool "smemcap"
default BUSYBOX_DEFAULT_SMEMCAP
help
- smemcap is a tool for capturing process data for smem,
- a memory usage statistic tool.
+ smemcap is a tool for capturing process data for smem,
+ a memory usage statistic tool.
config BUSYBOX_CONFIG_BB_SYSCTL
bool "sysctl"
default BUSYBOX_DEFAULT_BB_SYSCTL
help
- Configure kernel parameters at runtime.
+ Configure kernel parameters at runtime.
config BUSYBOX_CONFIG_TOP
bool "top"
default BUSYBOX_DEFAULT_TOP
help
- The top program provides a dynamic real-time view of a running
- system.
+ The top program provides a dynamic real-time view of a running
+ system.
config BUSYBOX_CONFIG_FEATURE_TOP_INTERACTIVE
bool "Accept keyboard commands"
default BUSYBOX_DEFAULT_FEATURE_TOP_INTERACTIVE
depends on BUSYBOX_CONFIG_TOP
help
- Without this, top will only refresh display every 5 seconds.
- No keyboard commands will work, only ^C to terminate.
+ Without this, top will only refresh display every 5 seconds.
+ No keyboard commands will work, only ^C to terminate.
config BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE
bool "Show CPU per-process usage percentage"
default BUSYBOX_DEFAULT_FEATURE_TOP_CPU_USAGE_PERCENTAGE
depends on BUSYBOX_CONFIG_TOP
help
- Make top display CPU usage for each process.
- This adds about 2k.
+ Make top display CPU usage for each process.
+ This adds about 2k.
config BUSYBOX_CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS
bool "Show CPU global usage percentage"
default BUSYBOX_DEFAULT_FEATURE_TOP_CPU_GLOBAL_PERCENTS
depends on BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE
help
- Makes top display "CPU: NN% usr NN% sys..." line.
- This adds about 0.5k.
+ Makes top display "CPU: NN% usr NN% sys..." line.
+ This adds about 0.5k.
config BUSYBOX_CONFIG_FEATURE_TOP_SMP_CPU
bool "SMP CPU usage display ('c' key)"
default BUSYBOX_DEFAULT_FEATURE_TOP_SMP_CPU
depends on BUSYBOX_CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS
help
- Allow 'c' key to switch between individual/cumulative CPU stats
- This adds about 0.5k.
+ Allow 'c' key to switch between individual/cumulative CPU stats
+ This adds about 0.5k.
config BUSYBOX_CONFIG_FEATURE_TOP_DECIMALS
bool "Show 1/10th of a percent in CPU/mem statistics"
default BUSYBOX_DEFAULT_FEATURE_TOP_DECIMALS
depends on BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE
help
- Show 1/10th of a percent in CPU/mem statistics.
- This adds about 0.3k.
+ Show 1/10th of a percent in CPU/mem statistics.
+ This adds about 0.3k.
config BUSYBOX_CONFIG_FEATURE_TOP_SMP_PROCESS
bool "Show CPU process runs on ('j' field)"
default BUSYBOX_DEFAULT_FEATURE_TOP_SMP_PROCESS
depends on BUSYBOX_CONFIG_TOP
help
- Show CPU where process was last found running on.
- This is the 'j' field.
+ Show CPU where process was last found running on.
+ This is the 'j' field.
config BUSYBOX_CONFIG_FEATURE_TOPMEM
bool "Topmem command ('s' key)"
default BUSYBOX_DEFAULT_FEATURE_TOPMEM
depends on BUSYBOX_CONFIG_TOP
help
- Enable 's' in top (gives lots of memory info).
+ Enable 's' in top (gives lots of memory info).
config BUSYBOX_CONFIG_UPTIME
bool "uptime"
default BUSYBOX_DEFAULT_UPTIME
select BUSYBOX_CONFIG_PLATFORM_LINUX #sysinfo()
help
- uptime gives a one line display of the current time, how long
- the system has been running, how many users are currently logged
- on, and the system load averages for the past 1, 5, and 15 minutes.
+ uptime gives a one line display of the current time, how long
+ the system has been running, how many users are currently logged
+ on, and the system load averages for the past 1, 5, and 15 minutes.
config BUSYBOX_CONFIG_FEATURE_UPTIME_UTMP_SUPPORT
bool "Show the number of users"
default BUSYBOX_DEFAULT_FEATURE_UPTIME_UTMP_SUPPORT
depends on BUSYBOX_CONFIG_UPTIME && BUSYBOX_CONFIG_FEATURE_UTMP
help
- Display the number of users currently logged on.
+ Display the number of users currently logged on.
config BUSYBOX_CONFIG_WATCH
bool "watch"
default BUSYBOX_DEFAULT_WATCH
help
- watch is used to execute a program periodically, showing
- output to the screen.
+ watch is used to execute a program periodically, showing
+ output to the screen.
config BUSYBOX_CONFIG_FEATURE_SHOW_THREADS
bool "Support thread display in ps/pstree/top"
default BUSYBOX_DEFAULT_FEATURE_SHOW_THREADS
depends on BUSYBOX_CONFIG_PS || BUSYBOX_CONFIG_TOP || BUSYBOX_CONFIG_PSTREE
help
- Enables the ps -T option, showing of threads in pstree,
- and 'h' command in top.
+ Enables the ps -T option, showing of threads in pstree,
+ and 'h' command in top.
endmenu
bool "chpst"
default BUSYBOX_DEFAULT_CHPST
help
- chpst changes the process state according to the given options, and
- execs specified program.
+ chpst changes the process state according to the given options, and
+ execs specified program.
config BUSYBOX_CONFIG_SETUIDGID
bool "setuidgid"
default BUSYBOX_DEFAULT_SETUIDGID
help
- Sets soft resource limits as specified by options
+ Sets soft resource limits as specified by options
config BUSYBOX_CONFIG_ENVUIDGID
bool "envuidgid"
default BUSYBOX_DEFAULT_ENVUIDGID
help
- Sets $UID to account's uid and $GID to account's gid
+ Sets $UID to account's uid and $GID to account's gid
config BUSYBOX_CONFIG_ENVDIR
bool "envdir"
default BUSYBOX_DEFAULT_ENVDIR
help
- Sets various environment variables as specified by files
- in the given directory
+ Sets various environment variables as specified by files
+ in the given directory
config BUSYBOX_CONFIG_SOFTLIMIT
bool "softlimit"
default BUSYBOX_DEFAULT_SOFTLIMIT
help
- Sets soft resource limits as specified by options
+ Sets soft resource limits as specified by options
config BUSYBOX_CONFIG_RUNSV
bool "runsv"
default BUSYBOX_DEFAULT_RUNSV
help
- runsv starts and monitors a service and optionally an appendant log
- service.
+ runsv starts and monitors a service and optionally an appendant log
+ service.
config BUSYBOX_CONFIG_RUNSVDIR
bool "runsvdir"
default BUSYBOX_DEFAULT_RUNSVDIR
help
- runsvdir starts a runsv process for each subdirectory, or symlink to
- a directory, in the services directory dir, up to a limit of 1000
- subdirectories, and restarts a runsv process if it terminates.
+ runsvdir starts a runsv process for each subdirectory, or symlink to
+ a directory, in the services directory dir, up to a limit of 1000
+ subdirectories, and restarts a runsv process if it terminates.
config BUSYBOX_CONFIG_FEATURE_RUNSVDIR_LOG
bool "Enable scrolling argument log"
depends on BUSYBOX_CONFIG_RUNSVDIR
default BUSYBOX_DEFAULT_FEATURE_RUNSVDIR_LOG
help
- Enable feature where second parameter of runsvdir holds last error
- message (viewable via top/ps). Otherwise (feature is off
- or no parameter), error messages go to stderr only.
+ Enable feature where second parameter of runsvdir holds last error
+ message (viewable via top/ps). Otherwise (feature is off
+ or no parameter), error messages go to stderr only.
config BUSYBOX_CONFIG_SV
bool "sv"
default BUSYBOX_DEFAULT_SV
help
- sv reports the current status and controls the state of services
- monitored by the runsv supervisor.
+ sv reports the current status and controls the state of services
+ monitored by the runsv supervisor.
config BUSYBOX_CONFIG_SV_DEFAULT_SERVICE_DIR
string "Default directory for services"
default BUSYBOX_DEFAULT_SV_DEFAULT_SERVICE_DIR
depends on BUSYBOX_CONFIG_SV
help
- Default directory for services.
- Defaults to "/var/service"
+ Default directory for services.
+ Defaults to "/var/service"
config BUSYBOX_CONFIG_SVC
bool "svc"
default BUSYBOX_DEFAULT_SVC
help
- svc controls the state of services monitored by the runsv supervisor.
- It is comaptible with daemontools command with the same name.
+ svc controls the state of services monitored by the runsv supervisor.
+ It is comaptible with daemontools command with the same name.
config BUSYBOX_CONFIG_SVLOGD
bool "svlogd"
default BUSYBOX_DEFAULT_SVLOGD
help
- svlogd continuously reads log data from its standard input, optionally
- filters log messages, and writes the data to one or more automatically
- rotated logs.
+ svlogd continuously reads log data from its standard input, optionally
+ filters log messages, and writes the data to one or more automatically
+ rotated logs.
endmenu
default BUSYBOX_DEFAULT_CHCON
depends on BUSYBOX_CONFIG_SELINUX
help
- Enable support to change the security context of file.
+ Enable support to change the security context of file.
config BUSYBOX_CONFIG_FEATURE_CHCON_LONG_OPTIONS
bool "Enable long options"
default BUSYBOX_DEFAULT_GETENFORCE
depends on BUSYBOX_CONFIG_SELINUX
help
- Enable support to get the current mode of SELinux.
+ Enable support to get the current mode of SELinux.
config BUSYBOX_CONFIG_GETSEBOOL
bool "getsebool"
default BUSYBOX_DEFAULT_GETSEBOOL
depends on BUSYBOX_CONFIG_SELINUX
help
- Enable support to get SELinux boolean values.
+ Enable support to get SELinux boolean values.
config BUSYBOX_CONFIG_LOAD_POLICY
bool "load_policy"
default BUSYBOX_DEFAULT_LOAD_POLICY
depends on BUSYBOX_CONFIG_SELINUX
help
- Enable support to load SELinux policy.
+ Enable support to load SELinux policy.
config BUSYBOX_CONFIG_MATCHPATHCON
bool "matchpathcon"
default BUSYBOX_DEFAULT_MATCHPATHCON
depends on BUSYBOX_CONFIG_SELINUX
help
- Enable support to get default security context of the
- specified path from the file contexts configuration.
+ Enable support to get default security context of the
+ specified path from the file contexts configuration.
config BUSYBOX_CONFIG_RUNCON
bool "runcon"
default BUSYBOX_DEFAULT_RUNCON
depends on BUSYBOX_CONFIG_SELINUX
help
- Enable support to run command in specified security context.
+ Enable support to run command in specified security context.
config BUSYBOX_CONFIG_FEATURE_RUNCON_LONG_OPTIONS
bool "Enable long options"
default BUSYBOX_DEFAULT_SELINUXENABLED
depends on BUSYBOX_CONFIG_SELINUX
help
- Enable support for this command to be used within shell scripts
- to determine if selinux is enabled.
+ Enable support for this command to be used within shell scripts
+ to determine if selinux is enabled.
config BUSYBOX_CONFIG_SESTATUS
bool "sestatus"
default BUSYBOX_DEFAULT_SESTATUS
depends on BUSYBOX_CONFIG_SELINUX
help
- Displays the status of SELinux.
+ Displays the status of SELinux.
config BUSYBOX_CONFIG_SETENFORCE
bool "setenforce"
default BUSYBOX_DEFAULT_SETENFORCE
depends on BUSYBOX_CONFIG_SELINUX
help
- Enable support to modify the mode SELinux is running in.
+ Enable support to modify the mode SELinux is running in.
config BUSYBOX_CONFIG_SETFILES
bool "setfiles"
default BUSYBOX_DEFAULT_SETFILES
depends on BUSYBOX_CONFIG_SELINUX
help
- Enable support to modify to relabel files.
- Notice: If you built libselinux with -D_FILE_OFFSET_BITS=64,
- (It is default in libselinux's Makefile), you _must_ enable
- CONFIG_LFS.
+ Enable support to modify to relabel files.
+ Notice: If you built libselinux with -D_FILE_OFFSET_BITS=64,
+ (It is default in libselinux's Makefile), you _must_ enable
+ CONFIG_LFS.
config BUSYBOX_CONFIG_FEATURE_SETFILES_CHECK_OPTION
bool "Enable check option"
default BUSYBOX_DEFAULT_FEATURE_SETFILES_CHECK_OPTION
depends on BUSYBOX_CONFIG_SETFILES
help
- Support "-c" option (check the validity of the contexts against
- the specified binary policy) for setfiles. Requires libsepol.
+ Support "-c" option (check the validity of the contexts against
+ the specified binary policy) for setfiles. Requires libsepol.
config BUSYBOX_CONFIG_RESTORECON
bool "restorecon"
default BUSYBOX_DEFAULT_RESTORECON
depends on BUSYBOX_CONFIG_SELINUX
help
- Enable support to relabel files. The feature is almost
- the same as setfiles, but usage is a little different.
+ Enable support to relabel files. The feature is almost
+ the same as setfiles, but usage is a little different.
config BUSYBOX_CONFIG_SETSEBOOL
bool "setsebool"
default BUSYBOX_DEFAULT_SETSEBOOL
depends on BUSYBOX_CONFIG_SELINUX
help
- Enable support for change boolean.
- semanage and -P option is not supported yet.
+ Enable support for change boolean.
+ semanage and -P option is not supported yet.
endmenu
prompt "Choose which shell is aliased to 'sh' name"
default BUSYBOX_CONFIG_SH_IS_ASH
help
- Choose which shell you want to be executed by 'sh' alias.
- The ash shell is the most bash compatible and full featured one.
+ Choose which shell you want to be executed by 'sh' alias.
+ The ash shell is the most bash compatible and full featured one.
# note: cannot use "select ASH" here, it breaks "make allnoconfig"
config BUSYBOX_CONFIG_SH_IS_ASH
depends on !BUSYBOX_CONFIG_NOMMU
bool "ash"
help
- Choose ash to be the shell executed by 'sh' name.
- The ash code will be built into busybox. If you don't select
- "ash" choice (CONFIG_ASH), this shell may only be invoked by
- the name 'sh' (and not 'ash').
+ Choose ash to be the shell executed by 'sh' name.
+ The ash code will be built into busybox. If you don't select
+ "ash" choice (CONFIG_ASH), this shell may only be invoked by
+ the name 'sh' (and not 'ash').
config BUSYBOX_CONFIG_SH_IS_HUSH
bool "hush"
help
- Choose hush to be the shell executed by 'sh' name.
- The hush code will be built into busybox. If you don't select
- "hush" choice (CONFIG_HUSH), this shell may only be invoked by
- the name 'sh' (and not 'hush').
+ Choose hush to be the shell executed by 'sh' name.
+ The hush code will be built into busybox. If you don't select
+ "hush" choice (CONFIG_HUSH), this shell may only be invoked by
+ the name 'sh' (and not 'hush').
config BUSYBOX_CONFIG_SH_IS_NONE
bool "none"
prompt "Choose which shell is aliased to 'bash' name"
default BUSYBOX_CONFIG_BASH_IS_NONE
help
- Choose which shell you want to be executed by 'bash' alias.
- The ash shell is the most bash compatible and full featured one,
- although compatibility is far from being complete.
+ Choose which shell you want to be executed by 'bash' alias.
+ The ash shell is the most bash compatible and full featured one,
+ although compatibility is far from being complete.
- Note that selecting this option does not switch on any bash
- compatibility code. It merely makes it possible to install
- /bin/bash (sym)link and run scripts which start with
- #!/bin/bash line.
+ Note that selecting this option does not switch on any bash
+ compatibility code. It merely makes it possible to install
+ /bin/bash (sym)link and run scripts which start with
+ #!/bin/bash line.
- Many systems use it in scripts which use bash-specific features,
- even simple ones like $RANDOM. Without this option, busybox
- can't be used for running them because it won't recongnize
- "bash" as a supported applet name.
+ Many systems use it in scripts which use bash-specific features,
+ even simple ones like $RANDOM. Without this option, busybox
+ can't be used for running them because it won't recongnize
+ "bash" as a supported applet name.
config BUSYBOX_CONFIG_BASH_IS_ASH
depends on !BUSYBOX_CONFIG_NOMMU
bool "ash"
help
- Choose ash to be the shell executed by 'bash' name.
- The ash code will be built into busybox. If you don't select
- "ash" choice (CONFIG_ASH), this shell may only be invoked by
- the name 'bash' (and not 'ash').
+ Choose ash to be the shell executed by 'bash' name.
+ The ash code will be built into busybox. If you don't select
+ "ash" choice (CONFIG_ASH), this shell may only be invoked by
+ the name 'bash' (and not 'ash').
config BUSYBOX_CONFIG_BASH_IS_HUSH
bool "hush"
help
- Choose hush to be the shell executed by 'bash' name.
- The hush code will be built into busybox. If you don't select
- "hush" choice (CONFIG_HUSH), this shell may only be invoked by
- the name 'bash' (and not 'hush').
+ Choose hush to be the shell executed by 'bash' name.
+ The hush code will be built into busybox. If you don't select
+ "hush" choice (CONFIG_HUSH), this shell may only be invoked by
+ the name 'bash' (and not 'hush').
config BUSYBOX_CONFIG_BASH_IS_NONE
bool "none"
default BUSYBOX_DEFAULT_ASH
depends on !BUSYBOX_CONFIG_NOMMU
help
- Tha 'ash' shell adds about 60k in the default configuration and is
- the most complete and most pedantically correct shell included with
- busybox. This shell is actually a derivative of the Debian 'dash'
- shell (by Herbert Xu), which was created by porting the 'ash' shell
- (written by Kenneth Almquist) from NetBSD.
+ Tha 'ash' shell adds about 60k in the default configuration and is
+ the most complete and most pedantically correct shell included with
+ busybox. This shell is actually a derivative of the Debian 'dash'
+ shell (by Herbert Xu), which was created by porting the 'ash' shell
+ (written by Kenneth Almquist) from NetBSD.
# ash options
# note: Don't remove !NOMMU part in the next line; it would break
default BUSYBOX_DEFAULT_ASH_INTERNAL_GLOB # Y is bigger, but because of uclibc glob() bug, let Y be default for now
depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
help
- Do not use glob() function from libc, use internal implementation.
- Use this if you are getting "glob.h: No such file or directory"
- or similar build errors.
- Note that as of now (2017-01), uclibc and musl glob() both have bugs
- which would break ash if you select N here.
+ Do not use glob() function from libc, use internal implementation.
+ Use this if you are getting "glob.h: No such file or directory"
+ or similar build errors.
+ Note that as of now (2017-01), uclibc and musl glob() both have bugs
+ which would break ash if you select N here.
config BUSYBOX_CONFIG_ASH_BASH_COMPAT
bool "bash-compatible extensions"
default BUSYBOX_DEFAULT_ASH_RANDOM_SUPPORT
depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
help
- Enable pseudorandom generator and dynamic variable "$RANDOM".
- Each read of "$RANDOM" will generate a new pseudorandom value.
- You can reset the generator by using a specified start value.
- After "unset RANDOM" the generator will switch off and this
- variable will no longer have special treatment.
+ Enable pseudorandom generator and dynamic variable "$RANDOM".
+ Each read of "$RANDOM" will generate a new pseudorandom value.
+ You can reset the generator by using a specified start value.
+ After "unset RANDOM" the generator will switch off and this
+ variable will no longer have special treatment.
config BUSYBOX_CONFIG_ASH_EXPAND_PRMT
bool "Expand prompt string"
default BUSYBOX_DEFAULT_ASH_EXPAND_PRMT
depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
help
- $PS# may contain volatile content, such as backquote commands.
- This option recreates the prompt string from the environment
- variable each time it is displayed.
+ $PS# may contain volatile content, such as backquote commands.
+ This option recreates the prompt string from the environment
+ variable each time it is displayed.
config BUSYBOX_CONFIG_ASH_IDLE_TIMEOUT
bool "Idle timeout variable $TMOUT"
default BUSYBOX_DEFAULT_ASH_IDLE_TIMEOUT
depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
help
- Enable bash-like auto-logout after $TMOUT seconds of idle time.
+ Enable bash-like auto-logout after $TMOUT seconds of idle time.
config BUSYBOX_CONFIG_ASH_MAIL
bool "Check for new mail in interactive shell"
default BUSYBOX_DEFAULT_ASH_MAIL
depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
help
- Enable "check for new mail" function:
- if set, $MAIL file and $MAILPATH list of files
- are checked for mtime changes, and "you have mail"
- message is printed if change is detected.
+ Enable "check for new mail" function:
+ if set, $MAIL file and $MAILPATH list of files
+ are checked for mtime changes, and "you have mail"
+ message is printed if change is detected.
config BUSYBOX_CONFIG_ASH_ECHO
bool "echo builtin"
default BUSYBOX_DEFAULT_ASH_CMDCMD
depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
help
- Enable support for the 'command' builtin, which allows
- you to run the specified command or builtin,
- even when there is a function with the same name.
+ Enable support for the 'command' builtin, which allows
+ you to run the specified command or builtin,
+ even when there is a function with the same name.
endif # ash options
config BUSYBOX_CONFIG_CTTYHACK
bool "cttyhack"
default BUSYBOX_DEFAULT_CTTYHACK
help
- One common problem reported on the mailing list is the "can't
- access tty; job control turned off" error message, which typically
- appears when one tries to use a shell with stdin/stdout on
- /dev/console.
- This device is special - it cannot be a controlling tty.
+ One common problem reported on the mailing list is the "can't
+ access tty; job control turned off" error message, which typically
+ appears when one tries to use a shell with stdin/stdout on
+ /dev/console.
+ This device is special - it cannot be a controlling tty.
- The proper solution is to use the correct device instead of
- /dev/console.
+ The proper solution is to use the correct device instead of
+ /dev/console.
- cttyhack provides a "quick and dirty" solution to this problem.
- It analyzes stdin with various ioctls, trying to determine whether
- it is a /dev/ttyN or /dev/ttySN (virtual terminal or serial line).
- On Linux it also checks sysfs for a pointer to the active console.
- If cttyhack is able to find the real console device, it closes
- stdin/out/err and reopens that device.
- Then it executes the given program. Opening the device will make
- that device a controlling tty. This may require cttyhack
- to be a session leader.
+ cttyhack provides a "quick and dirty" solution to this problem.
+ It analyzes stdin with various ioctls, trying to determine whether
+ it is a /dev/ttyN or /dev/ttySN (virtual terminal or serial line).
+ On Linux it also checks sysfs for a pointer to the active console.
+ If cttyhack is able to find the real console device, it closes
+ stdin/out/err and reopens that device.
+ Then it executes the given program. Opening the device will make
+ that device a controlling tty. This may require cttyhack
+ to be a session leader.
- Example for /etc/inittab (for busybox init):
+ Example for /etc/inittab (for busybox init):
- ::respawn:/bin/cttyhack /bin/sh
+ ::respawn:/bin/cttyhack /bin/sh
- Starting an interactive shell from boot shell script:
+ Starting an interactive shell from boot shell script:
- setsid cttyhack sh
+ setsid cttyhack sh
- Giving controlling tty to shell running with PID 1:
+ Giving controlling tty to shell running with PID 1:
- # exec cttyhack sh
+ # exec cttyhack sh
- Without cttyhack, you need to know exact tty name,
- and do something like this:
+ Without cttyhack, you need to know exact tty name,
+ and do something like this:
- # exec setsid sh -c 'exec sh </dev/tty1 >/dev/tty1 2>&1'
+ # exec setsid sh -c 'exec sh </dev/tty1 >/dev/tty1 2>&1'
- Starting getty on a controlling tty from a shell script:
+ Starting getty on a controlling tty from a shell script:
- # getty 115200 $(cttyhack)
+ # getty 115200 $(cttyhack)
config BUSYBOX_CONFIG_HUSH
bool "hush"
default BUSYBOX_DEFAULT_HUSH
help
- hush is a small shell (25k). It handles the normal flow control
- constructs such as if/then/elif/else/fi, for/in/do/done, while loops,
- case/esac. Redirections, here documents, $((arithmetic))
- and functions are supported.
+ hush is a small shell (25k). It handles the normal flow control
+ constructs such as if/then/elif/else/fi, for/in/do/done, while loops,
+ case/esac. Redirections, here documents, $((arithmetic))
+ and functions are supported.
- It will compile and work on no-mmu systems.
+ It will compile and work on no-mmu systems.
- It does not handle select, aliases, tilde expansion,
- &>file and >&file redirection of stdout+stderr.
+ It does not handle select, aliases, tilde expansion,
+ &>file and >&file redirection of stdout+stderr.
config BUSYBOX_CONFIG_HUSH_BASH_COMPAT
bool "bash-compatible extensions"
default BUSYBOX_DEFAULT_HUSH_BRACE_EXPANSION
depends on BUSYBOX_CONFIG_HUSH_BASH_COMPAT
help
- Enable {abc,def} extension.
+ Enable {abc,def} extension.
config BUSYBOX_CONFIG_HUSH_INTERACTIVE
bool "Interactive mode"
default BUSYBOX_DEFAULT_HUSH_INTERACTIVE
depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
help
- Enable interactive mode (prompt and command editing).
- Without this, hush simply reads and executes commands
- from stdin just like a shell script from a file.
- No prompt, no PS1/PS2 magic shell variables.
+ Enable interactive mode (prompt and command editing).
+ Without this, hush simply reads and executes commands
+ from stdin just like a shell script from a file.
+ No prompt, no PS1/PS2 magic shell variables.
config BUSYBOX_CONFIG_HUSH_SAVEHISTORY
bool "Save command history to .hush_history"
default BUSYBOX_DEFAULT_HUSH_JOB
depends on BUSYBOX_CONFIG_HUSH_INTERACTIVE
help
- Enable job control: Ctrl-Z backgrounds, Ctrl-C interrupts current
- command (not entire shell), fg/bg builtins work. Without this option,
- "cmd &" still works by simply spawning a process and immediately
- prompting for next command (or executing next command in a script),
- but no separate process group is formed.
+ Enable job control: Ctrl-Z backgrounds, Ctrl-C interrupts current
+ command (not entire shell), fg/bg builtins work. Without this option,
+ "cmd &" still works by simply spawning a process and immediately
+ prompting for next command (or executing next command in a script),
+ but no separate process group is formed.
config BUSYBOX_CONFIG_HUSH_TICK
bool "Support process substitution"
default BUSYBOX_DEFAULT_HUSH_TICK
depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
help
- Enable `command` and $(command).
+ Enable `command` and $(command).
config BUSYBOX_CONFIG_HUSH_IF
bool "Support if/then/elif/else/fi"
default BUSYBOX_DEFAULT_HUSH_CASE
depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
help
- Enable case ... esac statement. +400 bytes.
+ Enable case ... esac statement. +400 bytes.
config BUSYBOX_CONFIG_HUSH_FUNCTIONS
bool "Support funcname() { commands; } syntax"
default BUSYBOX_DEFAULT_HUSH_FUNCTIONS
depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
help
- Enable support for shell functions. +800 bytes.
+ Enable support for shell functions. +800 bytes.
config BUSYBOX_CONFIG_HUSH_LOCAL
bool "local builtin"
default BUSYBOX_DEFAULT_HUSH_LOCAL
depends on BUSYBOX_CONFIG_HUSH_FUNCTIONS
help
- Enable support for local variables in functions.
+ Enable support for local variables in functions.
config BUSYBOX_CONFIG_HUSH_RANDOM_SUPPORT
bool "Pseudorandom generator and $RANDOM variable"
default BUSYBOX_DEFAULT_HUSH_RANDOM_SUPPORT
depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
help
- Enable pseudorandom generator and dynamic variable "$RANDOM".
- Each read of "$RANDOM" will generate a new pseudorandom value.
+ Enable pseudorandom generator and dynamic variable "$RANDOM".
+ Each read of "$RANDOM" will generate a new pseudorandom value.
config BUSYBOX_CONFIG_HUSH_MODE_X
bool "Support 'hush -x' option and 'set -x' command"
default BUSYBOX_DEFAULT_HUSH_MODE_X
depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
help
- This instructs hush to print commands before execution.
- Adds ~300 bytes.
+ This instructs hush to print commands before execution.
+ Adds ~300 bytes.
config BUSYBOX_CONFIG_HUSH_ECHO
bool "echo builtin"
default BUSYBOX_DEFAULT_HUSH_EXPORT_N
depends on BUSYBOX_CONFIG_HUSH_EXPORT
help
- export -n unexports variables. It is a bash extension.
+ export -n unexports variables. It is a bash extension.
config BUSYBOX_CONFIG_HUSH_KILL
bool "kill builtin (supports kill %jobspec)"
default BUSYBOX_DEFAULT_MSH
select BUSYBOX_CONFIG_HUSH
help
- msh is deprecated and will be removed, please migrate to hush.
+ msh is deprecated and will be removed, please migrate to hush.
comment "Options common to all shells"
default BUSYBOX_DEFAULT_FEATURE_SH_MATH
depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
help
- Enable math support in the shell via $((...)) syntax.
+ Enable math support in the shell via $((...)) syntax.
config BUSYBOX_CONFIG_FEATURE_SH_MATH_64
bool "Extend POSIX math support to 64 bit"
default BUSYBOX_DEFAULT_FEATURE_SH_MATH_64
depends on BUSYBOX_CONFIG_FEATURE_SH_MATH
help
- Enable 64-bit math support in the shell. This will make the shell
- slightly larger, but will allow computation with very large numbers.
- This is not in POSIX, so do not rely on this in portable code.
+ Enable 64-bit math support in the shell. This will make the shell
+ slightly larger, but will allow computation with very large numbers.
+ This is not in POSIX, so do not rely on this in portable code.
config BUSYBOX_CONFIG_FEATURE_SH_EXTRA_QUIET
bool "Hide message on interactive shell startup"
default BUSYBOX_DEFAULT_FEATURE_SH_EXTRA_QUIET
depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
help
- Remove the busybox introduction when starting a shell.
+ Remove the busybox introduction when starting a shell.
config BUSYBOX_CONFIG_FEATURE_SH_STANDALONE
bool "Standalone shell"
default BUSYBOX_DEFAULT_FEATURE_SH_STANDALONE
depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
help
- This option causes busybox shells to use busybox applets
- in preference to executables in the PATH whenever possible. For
- example, entering the command 'ifconfig' into the shell would cause
- busybox to use the ifconfig busybox applet. Specifying the fully
- qualified executable name, such as '/sbin/ifconfig' will still
- execute the /sbin/ifconfig executable on the filesystem. This option
- is generally used when creating a statically linked version of busybox
- for use as a rescue shell, in the event that you screw up your system.
+ This option causes busybox shells to use busybox applets
+ in preference to executables in the PATH whenever possible. For
+ example, entering the command 'ifconfig' into the shell would cause
+ busybox to use the ifconfig busybox applet. Specifying the fully
+ qualified executable name, such as '/sbin/ifconfig' will still
+ execute the /sbin/ifconfig executable on the filesystem. This option
+ is generally used when creating a statically linked version of busybox
+ for use as a rescue shell, in the event that you screw up your system.
- This is implemented by re-execing /proc/self/exe (typically)
- with right parameters.
+ This is implemented by re-execing /proc/self/exe (typically)
+ with right parameters.
- However, there are drawbacks: it is problematic in chroot jails
- without mounted /proc, and ps/top may show command name as 'exe'
- for applets started this way.
+ However, there are drawbacks: it is problematic in chroot jails
+ without mounted /proc, and ps/top may show command name as 'exe'
+ for applets started this way.
config BUSYBOX_CONFIG_FEATURE_SH_NOFORK
bool "Run 'nofork' applets directly"
default BUSYBOX_DEFAULT_FEATURE_SH_NOFORK
depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
help
- This option causes busybox shells to not execute typical
-
fork/exec/wait sequence, but call <applet>_main directly,
- if possible. (Sometimes it is not possible: for example,
- this is not possible in pipes).
+ This option causes busybox shells to not execute typical
+ fork/exec/wait sequence, but call <applet>_main directly,
+ if possible. (Sometimes it is not possible: for example,
+ this is not possible in pipes).
- This will be done only for some applets (those which are marked
- NOFORK in include/applets.h).
+ This will be done only for some applets (those which are marked
+ NOFORK in include/applets.h).
- This may significantly speed up some shell scripts.
+ This may significantly speed up some shell scripts.
- This feature is relatively new. Use with care. Report bugs
- to project mailing list.
+ This feature is relatively new. Use with care. Report bugs
+ to project mailing list.
config BUSYBOX_CONFIG_FEATURE_SH_HISTFILESIZE
bool "Use $HISTFILESIZE"
default BUSYBOX_DEFAULT_FEATURE_SH_HISTFILESIZE
depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
help
- This option makes busybox shells to use $HISTFILESIZE variable
- to set shell history size. Note that its max value is capped
- by "History size" setting in library tuning section.
+ This option makes busybox shells to use $HISTFILESIZE variable
+ to set shell history size. Note that its max value is capped
+ by "History size" setting in library tuning section.
endif # Options common to all shells
bool "klogd"
default BUSYBOX_DEFAULT_KLOGD
help
- klogd is a utility which intercepts and logs all
- messages from the Linux kernel and sends the messages
- out to the 'syslogd' utility so they can be logged. If
- you wish to record the messages produced by the kernel,
- you should enable this option.
+ klogd is a utility which intercepts and logs all
+ messages from the Linux kernel and sends the messages
+ out to the 'syslogd' utility so they can be logged. If
+ you wish to record the messages produced by the kernel,
+ you should enable this option.
comment "klogd should not be used together with syslog to kernel printk buffer"
depends on BUSYBOX_CONFIG_KLOGD && BUSYBOX_CONFIG_FEATURE_KMSG_SYSLOG
depends on BUSYBOX_CONFIG_KLOGD
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- The klogd applet supports two interfaces for reading
- kernel messages. Linux provides the klogctl() interface
- which allows reading messages from the kernel ring buffer
- independently from the file system.
+ The klogd applet supports two interfaces for reading
+ kernel messages. Linux provides the klogctl() interface
+ which allows reading messages from the kernel ring buffer
+ independently from the file system.
- If you answer 'N' here, klogd will use the more portable
- approach of reading them from /proc or a device node.
- However, this method requires the file to be available.
+ If you answer 'N' here, klogd will use the more portable
+ approach of reading them from /proc or a device node.
+ However, this method requires the file to be available.
- If in doubt, say 'Y'.
+ If in doubt, say 'Y'.
config BUSYBOX_CONFIG_LOGGER
bool "logger"
default BUSYBOX_DEFAULT_LOGGER
bool "logread"
default BUSYBOX_DEFAULT_LOGREAD
help
- If you enabled Circular Buffer support, you almost
- certainly want to enable this feature as well. This
- utility will allow you to read the messages that are
- stored in the syslogd circular buffer.
+ If you enabled Circular Buffer support, you almost
+ certainly want to enable this feature as well. This
+ utility will allow you to read the messages that are
+ stored in the syslogd circular buffer.
config BUSYBOX_CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING
bool "Double buffering"
default BUSYBOX_DEFAULT_FEATURE_LOGREAD_REDUCED_LOCKING
depends on BUSYBOX_CONFIG_LOGREAD
help
- 'logread' output to slow serial terminals can have
- side effects on syslog because of the semaphore.
- This option make logread to double buffer copy
- from circular buffer, minimizing semaphore
- contention at some minor memory expense.
+ 'logread' output to slow serial terminals can have
+ side effects on syslog because of the semaphore.
+ This option make logread to double buffer copy
+ from circular buffer, minimizing semaphore
+ contention at some minor memory expense.
config BUSYBOX_CONFIG_SYSLOGD
bool "syslogd"
default BUSYBOX_DEFAULT_SYSLOGD
help
- The syslogd utility is used to record logs of all the
- significant events that occur on a system. Every
- message that is logged records the date and time of the
- event, and will generally also record the name of the
- application that generated the message. When used in
- conjunction with klogd, messages from the Linux kernel
- can also be recorded. This is terribly useful,
- especially for finding what happened when something goes
- wrong. And something almost always will go wrong if
- you wait long enough....
+ The syslogd utility is used to record logs of all the
+ significant events that occur on a system. Every
+ message that is logged records the date and time of the
+ event, and will generally also record the name of the
+ application that generated the message. When used in
+ conjunction with klogd, messages from the Linux kernel
+ can also be recorded. This is terribly useful,
+ especially for finding what happened when something goes
+ wrong. And something almost always will go wrong if
+ you wait long enough....
config BUSYBOX_CONFIG_FEATURE_ROTATE_LOGFILE
bool "Rotate message files"
default BUSYBOX_DEFAULT_FEATURE_ROTATE_LOGFILE
depends on BUSYBOX_CONFIG_SYSLOGD
help
- This enables syslogd to rotate the message files
- on his own. No need to use an external rotate script.
+ This enables syslogd to rotate the message files
+ on his own. No need to use an external rotate script.
config BUSYBOX_CONFIG_FEATURE_REMOTE_LOG
bool "Remote Log support"
default BUSYBOX_DEFAULT_FEATURE_REMOTE_LOG
depends on BUSYBOX_CONFIG_SYSLOGD
help
- When you enable this feature, the syslogd utility can
- be used to send system log messages to another system
- connected via a network. This allows the remote
- machine to log all the system messages, which can be
- terribly useful for reducing the number of serial
- cables you use. It can also be a very good security
- measure to prevent system logs from being tampered with
- by an intruder.
+ When you enable this feature, the syslogd utility can
+ be used to send system log messages to another system
+ connected via a network. This allows the remote
+ machine to log all the system messages, which can be
+ terribly useful for reducing the number of serial
+ cables you use. It can also be a very good security
+ measure to prevent system logs from being tampered with
+ by an intruder.
config BUSYBOX_CONFIG_FEATURE_SYSLOGD_DUP
bool "Support -D (drop dups) option"
default BUSYBOX_DEFAULT_FEATURE_SYSLOGD_DUP
depends on BUSYBOX_CONFIG_SYSLOGD
help
- Option -D instructs syslogd to drop consecutive messages
- which are totally the same.
+ Option -D instructs syslogd to drop consecutive messages
+ which are totally the same.
config BUSYBOX_CONFIG_FEATURE_SYSLOGD_CFG
bool "Support syslog.conf"
default BUSYBOX_DEFAULT_FEATURE_SYSLOGD_CFG
depends on BUSYBOX_CONFIG_SYSLOGD
help
- Supports restricted syslogd config. See docs/syslog.conf.txt
+ Supports restricted syslogd config. See docs/syslog.conf.txt
config BUSYBOX_CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE
int "Read buffer size in bytes"
range 256 20000
depends on BUSYBOX_CONFIG_SYSLOGD
help
- This option sets the size of the syslog read buffer.
- Actual memory usage increases around five times the
- change done here.
+ This option sets the size of the syslog read buffer.
+ Actual memory usage increases around five times the
+ change done here.
config BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG
bool "Circular Buffer support"
default BUSYBOX_DEFAULT_FEATURE_IPC_SYSLOG
depends on BUSYBOX_CONFIG_SYSLOGD
help
- When you enable this feature, the syslogd utility will
- use a circular buffer to record system log messages.
- When the buffer is filled it will continue to overwrite
- the oldest messages. This can be very useful for
- systems with little or no permanent storage, since
- otherwise system logs can eventually fill up your
- entire filesystem, which may cause your system to
- break badly.
+ When you enable this feature, the syslogd utility will
+ use a circular buffer to record system log messages.
+ When the buffer is filled it will continue to overwrite
+ the oldest messages. This can be very useful for
+ systems with little or no permanent storage, since
+ otherwise system logs can eventually fill up your
+ entire filesystem, which may cause your system to
+ break badly.
config BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE
int "Circular buffer size in Kbytes (minimum 4KB)"
range 4 2147483647
depends on BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG
help
- This option sets the size of the circular buffer
- used to record system log messages.
+ This option sets the size of the circular buffer
+ used to record system log messages.
config BUSYBOX_CONFIG_FEATURE_KMSG_SYSLOG
bool "Linux kernel printk buffer support"
depends on BUSYBOX_CONFIG_SYSLOGD
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- When you enable this feature, the syslogd utility will
- write system log message to the Linux kernel's printk buffer.
- This can be used as a smaller alternative to the syslogd IPC
- support, as klogd and logread aren't needed.
+ When you enable this feature, the syslogd utility will
+ write system log message to the Linux kernel's printk buffer.
+ This can be used as a smaller alternative to the syslogd IPC
+ support, as klogd and logread aren't needed.
- NOTICE: Syslog facilities in log entries needs kernel 3.5+.
+ NOTICE: Syslog facilities in log entries needs kernel 3.5+.
endmenu
default BUSYBOX_DEFAULT_ACPID
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- acpid listens to ACPI events coming either in textual form from
- /proc/acpi/event (though it is marked deprecated it is still widely
- used and _is_ a standard) or in binary form from specified evdevs
- (just use /dev/input/event*).
+ acpid listens to ACPI events coming either in textual form from
+ /proc/acpi/event (though it is marked deprecated it is still widely
+ used and _is_ a standard) or in binary form from specified evdevs
+ (just use /dev/input/event*).
- It parses the event to retrieve ACTION and a possible PARAMETER.
-
It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts
- (if the resulting path is a directory) or directly as an executable.
+ It parses the event to retrieve ACTION and a possible PARAMETER.
+ It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts
+ (if the resulting path is a directory) or directly as an executable.
- N.B. acpid relies on run-parts so have the latter installed.
+ N.B. acpid relies on run-parts so have the latter installed.
config BUSYBOX_CONFIG_FEATURE_ACPID_COMPAT
bool "Accept and ignore redundant options"
default BUSYBOX_DEFAULT_FEATURE_ACPID_COMPAT
depends on BUSYBOX_CONFIG_ACPID
help
- Accept and ignore compatibility options -g -m -s -S -v.
+ Accept and ignore compatibility options -g -m -s -S -v.
config BUSYBOX_CONFIG_BLKDISCARD
bool "blkdiscard"
default BUSYBOX_DEFAULT_BLKDISCARD
help
- blkdiscard discards sectors on a given device.
+ blkdiscard discards sectors on a given device.
config BUSYBOX_CONFIG_BLKID
bool "blkid"
default BUSYBOX_DEFAULT_BLKID
select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_VOLUMEID
help
- Lists labels and UUIDs of all filesystems.
- WARNING:
- With all submodules selected, it will add ~8k to busybox.
+ Lists labels and UUIDs of all filesystems.
+ WARNING:
+ With all submodules selected, it will add ~8k to busybox.
config BUSYBOX_CONFIG_FEATURE_BLKID_TYPE
bool "Print filesystem type"
default BUSYBOX_DEFAULT_FEATURE_BLKID_TYPE
depends on BUSYBOX_CONFIG_BLKID
help
- Show TYPE="filesystem type"
+ Show TYPE="filesystem type"
config BUSYBOX_CONFIG_BLOCKDEV
bool "blockdev"
default BUSYBOX_DEFAULT_BLOCKDEV
help
- Performs some ioctls with block devices.
+ Performs some ioctls with block devices.
config BUSYBOX_CONFIG_CAL
bool "cal"
default BUSYBOX_DEFAULT_CAL
help
- cal is used to display a monthly calendar.
+ cal is used to display a monthly calendar.
config BUSYBOX_CONFIG_CHRT
bool "chrt"
default BUSYBOX_DEFAULT_CHRT
help
- manipulate real-time attributes of a process.
- This requires sched_{g,s}etparam support in your libc.
+ manipulate real-time attributes of a process.
+ This requires sched_{g,s}etparam support in your libc.
config BUSYBOX_CONFIG_DMESG
bool "dmesg"
default BUSYBOX_DEFAULT_DMESG
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- dmesg is used to examine or control the kernel ring buffer. When the
- Linux kernel prints messages to the system log, they are stored in
- the kernel ring buffer. You can use dmesg to print the kernel's ring
- buffer, clear the kernel ring buffer, change the size of the kernel
- ring buffer, and change the priority level at which kernel messages
- are also logged to the system console. Enable this option if you
- wish to enable the 'dmesg' utility.
+ dmesg is used to examine or control the kernel ring buffer. When the
+ Linux kernel prints messages to the system log, they are stored in
+ the kernel ring buffer. You can use dmesg to print the kernel's ring
+ buffer, clear the kernel ring buffer, change the size of the kernel
+ ring buffer, and change the priority level at which kernel messages
+ are also logged to the system console. Enable this option if you
+ wish to enable the 'dmesg' utility.
config BUSYBOX_CONFIG_FEATURE_DMESG_PRETTY
bool "Pretty output"
default BUSYBOX_DEFAULT_FEATURE_DMESG_PRETTY
depends on BUSYBOX_CONFIG_DMESG
help
- If you wish to scrub the syslog level from the output, say 'Y' here.
- The syslog level is a string prefixed to every line with the form
- "<#>".
+ If you wish to scrub the syslog level from the output, say 'Y' here.
+ The syslog level is a string prefixed to every line with the form
+ "<#>".
- With this option you will see:
+ With this option you will see:
# dmesg
Linux version 2.6.17.4 .....
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
- Without this option you will see:
+ Without this option you will see:
# dmesg
<5>Linux version 2.6.17.4 .....
<6>BIOS-provided physical RAM map:
default BUSYBOX_DEFAULT_EJECT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Used to eject cdroms. (defaults to /dev/cdrom)
+ Used to eject cdroms. (defaults to /dev/cdrom)
config BUSYBOX_CONFIG_FEATURE_EJECT_SCSI
bool "SCSI support"
default BUSYBOX_DEFAULT_FEATURE_EJECT_SCSI
depends on BUSYBOX_CONFIG_EJECT
help
- Add the -s option to eject, this allows to eject SCSI-Devices and
- usb-storage devices.
+ Add the -s option to eject, this allows to eject SCSI-Devices and
+ usb-storage devices.
config BUSYBOX_CONFIG_FALLOCATE
bool "fallocate"
default BUSYBOX_DEFAULT_FALLOCATE
help
- Preallocate space for files.
+ Preallocate space for files.
config BUSYBOX_CONFIG_FATATTR
bool "fatattr"
default BUSYBOX_DEFAULT_FATATTR
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- fatattr lists or changes the file attributes on a fat file system.
+ fatattr lists or changes the file attributes on a fat file system.
config BUSYBOX_CONFIG_FBSET
bool "fbset"
default BUSYBOX_DEFAULT_FBSET
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- fbset is used to show or change the settings of a Linux frame buffer
- device. The frame buffer device provides a simple and unique
- interface to access a graphics display. Enable this option
- if you wish to enable the 'fbset' utility.
+ fbset is used to show or change the settings of a Linux frame buffer
+ device. The frame buffer device provides a simple and unique
+ interface to access a graphics display. Enable this option
+ if you wish to enable the 'fbset' utility.
config BUSYBOX_CONFIG_FEATURE_FBSET_FANCY
bool "Enable extra options"
default BUSYBOX_DEFAULT_FEATURE_FBSET_FANCY
depends on BUSYBOX_CONFIG_FBSET
help
- This option enables extended fbset options, allowing one to set the
- framebuffer size, color depth, etc. interface to access a graphics
- display. Enable this option if you wish to enable extended fbset
- options.
+ This option enables extended fbset options, allowing one to set the
+ framebuffer size, color depth, etc. interface to access a graphics
+ display. Enable this option if you wish to enable extended fbset
+ options.
config BUSYBOX_CONFIG_FEATURE_FBSET_READMODE
bool "Enable readmode support"
default BUSYBOX_DEFAULT_FEATURE_FBSET_READMODE
depends on BUSYBOX_CONFIG_FBSET
help
- This option allows fbset to read the video mode database stored by
- default BUSYBOX_DEFAULT_FEATURE_FBSET_READMODE /etc/fb.modes, which can be used to set frame buffer
- device to pre-defined video modes.
+ This option allows fbset to read the video mode database stored by
+ default BUSYBOX_DEFAULT_FEATURE_FBSET_READMODE /etc/fb.modes, which can be used to set frame buffer
+ device to pre-defined video modes.
config BUSYBOX_CONFIG_FDFORMAT
bool "fdformat"
default BUSYBOX_DEFAULT_FDFORMAT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- fdformat is used to low-level format a floppy disk.
+ fdformat is used to low-level format a floppy disk.
config BUSYBOX_CONFIG_FDISK
bool "fdisk"
default BUSYBOX_DEFAULT_FDISK
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- The fdisk utility is used to divide hard disks into one or more
- logical disks, which are generally called partitions. This utility
- can be used to list and edit the set of partitions or BSD style
- 'disk slices' that are defined on a hard drive.
+ The fdisk utility is used to divide hard disks into one or more
+ logical disks, which are generally called partitions. This utility
+ can be used to list and edit the set of partitions or BSD style
+ 'disk slices' that are defined on a hard drive.
config BUSYBOX_CONFIG_FDISK_SUPPORT_LARGE_DISKS
bool "Support over 4GB disks"
default BUSYBOX_DEFAULT_FEATURE_FDISK_WRITABLE
depends on BUSYBOX_CONFIG_FDISK
help
- Enabling this option allows you to create or change a partition table
- and write those changes out to disk. If you leave this option
- disabled, you will only be able to view the partition table.
+ Enabling this option allows you to create or change a partition table
+ and write those changes out to disk. If you leave this option
+ disabled, you will only be able to view the partition table.
config BUSYBOX_CONFIG_FEATURE_AIX_LABEL
bool "Support AIX disklabels"
default BUSYBOX_DEFAULT_FEATURE_AIX_LABEL
depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
help
- Enabling this option allows you to create or change AIX disklabels.
- Most people can safely leave this option disabled.
+ Enabling this option allows you to create or change AIX disklabels.
+ Most people can safely leave this option disabled.
config BUSYBOX_CONFIG_FEATURE_SGI_LABEL
bool "Support SGI disklabels"
default BUSYBOX_DEFAULT_FEATURE_SGI_LABEL
depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
help
- Enabling this option allows you to create or change SGI disklabels.
- Most people can safely leave this option disabled.
+ Enabling this option allows you to create or change SGI disklabels.
+ Most people can safely leave this option disabled.
config BUSYBOX_CONFIG_FEATURE_SUN_LABEL
bool "Support SUN disklabels"
default BUSYBOX_DEFAULT_FEATURE_SUN_LABEL
depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
help
- Enabling this option allows you to create or change SUN disklabels.
- Most people can safely leave this option disabled.
+ Enabling this option allows you to create or change SUN disklabels.
+ Most people can safely leave this option disabled.
config BUSYBOX_CONFIG_FEATURE_OSF_LABEL
bool "Support BSD disklabels"
default BUSYBOX_DEFAULT_FEATURE_OSF_LABEL
depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
help
- Enabling this option allows you to create or change BSD disklabels
- and define and edit BSD disk slices.
+ Enabling this option allows you to create or change BSD disklabels
+ and define and edit BSD disk slices.
config BUSYBOX_CONFIG_FEATURE_GPT_LABEL
bool "Support GPT disklabels"
default BUSYBOX_DEFAULT_FEATURE_GPT_LABEL
depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
help
- Enabling this option allows you to view GUID Partition Table
- disklabels.
+ Enabling this option allows you to view GUID Partition Table
+ disklabels.
config BUSYBOX_CONFIG_FEATURE_FDISK_ADVANCED
bool "Support expert mode"
default BUSYBOX_DEFAULT_FEATURE_FDISK_ADVANCED
depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
help
- Enabling this option allows you to do terribly unsafe things like
- define arbitrary drive geometry, move the beginning of data in a
- partition, and similarly evil things. Unless you have a very good
- reason you would be wise to leave this disabled.
+ Enabling this option allows you to do terribly unsafe things like
+ define arbitrary drive geometry, move the beginning of data in a
+ partition, and similarly evil things. Unless you have a very good
+ reason you would be wise to leave this disabled.
config BUSYBOX_CONFIG_FINDFS
bool "findfs"
default BUSYBOX_DEFAULT_FINDFS
select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_VOLUMEID
help
- Prints the name of a filesystem with given label or UUID.
- WARNING:
- With all submodules selected, it will add ~8k to busybox.
+ Prints the name of a filesystem with given label or UUID.
+ WARNING:
+ With all submodules selected, it will add ~8k to busybox.
config BUSYBOX_CONFIG_FLOCK
bool "flock"
default BUSYBOX_DEFAULT_FLOCK
help
- Manage locks from shell scripts
+ Manage locks from shell scripts
config BUSYBOX_CONFIG_FDFLUSH
bool "fdflush"
default BUSYBOX_DEFAULT_FDFLUSH
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- fdflush is only needed when changing media on slightly-broken
- removable media drives. It is used to make Linux believe that a
- hardware disk-change switch has been actuated, which causes Linux to
- forget anything it has cached from the previous media. If you have
- such a slightly-broken drive, you will need to run fdflush every time
- you change a disk. Most people have working hardware and can safely
- leave this disabled.
+ fdflush is only needed when changing media on slightly-broken
+ removable media drives. It is used to make Linux believe that a
+ hardware disk-change switch has been actuated, which causes Linux to
+ forget anything it has cached from the previous media. If you have
+ such a slightly-broken drive, you will need to run fdflush every time
+ you change a disk. Most people have working hardware and can safely
+ leave this disabled.
config BUSYBOX_CONFIG_FREERAMDISK
bool "freeramdisk"
default BUSYBOX_DEFAULT_FREERAMDISK
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Linux allows you to create ramdisks. This utility allows you to
- delete them and completely free all memory that was used for the
- ramdisk. For example, if you boot Linux into a ramdisk and later
- pivot_root, you may want to free the memory that is allocated to the
- ramdisk. If you have no use for freeing memory from a ramdisk, leave
- this disabled.
+ Linux allows you to create ramdisks. This utility allows you to
+ delete them and completely free all memory that was used for the
+ ramdisk. For example, if you boot Linux into a ramdisk and later
+ pivot_root, you may want to free the memory that is allocated to the
+ ramdisk. If you have no use for freeing memory from a ramdisk, leave
+ this disabled.
config BUSYBOX_CONFIG_FSCK_MINIX
bool "fsck_minix"
default BUSYBOX_DEFAULT_FSCK_MINIX
help
- The minix filesystem is a nice, small, compact, read-write filesystem
- with little overhead. It is not a journaling filesystem however and
- can experience corruption if it is not properly unmounted or if the
- power goes off in the middle of a write. This utility allows you to
- check for and attempt to repair any corruption that occurs to a minix
- filesystem.
+ The minix filesystem is a nice, small, compact, read-write filesystem
+ with little overhead. It is not a journaling filesystem however and
+ can experience corruption if it is not properly unmounted or if the
+ power goes off in the middle of a write. This utility allows you to
+ check for and attempt to repair any corruption that occurs to a minix
+ filesystem.
config BUSYBOX_CONFIG_FSFREEZE
bool "fsfreeze"
default BUSYBOX_DEFAULT_FSFREEZE
select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_LONG_OPTS
help
- Halt new accesses and flush writes on a mounted filesystem.
+ Halt new accesses and flush writes on a mounted filesystem.
config BUSYBOX_CONFIG_FSTRIM
bool "fstrim"
default BUSYBOX_DEFAULT_FSTRIM
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Discard unused blocks on a mounted filesystem.
+ Discard unused blocks on a mounted filesystem.
config BUSYBOX_CONFIG_GETOPT
bool "getopt"
default BUSYBOX_DEFAULT_GETOPT
help
- The getopt utility is used to break up (parse) options in command
- lines to make it easy to write complex shell scripts that also check
- for legal (and illegal) options. If you want to write horribly
- complex shell scripts, or use some horribly complex shell script
- written by others, this utility may be for you. Most people will
- wisely leave this disabled.
+ The getopt utility is used to break up (parse) options in command
+ lines to make it easy to write complex shell scripts that also check
+ for legal (and illegal) options. If you want to write horribly
+ complex shell scripts, or use some horribly complex shell script
+ written by others, this utility may be for you. Most people will
+ wisely leave this disabled.
config BUSYBOX_CONFIG_FEATURE_GETOPT_LONG
bool "Support option -l"
default BUSYBOX_DEFAULT_FEATURE_GETOPT_LONG if BUSYBOX_CONFIG_LONG_OPTS
depends on BUSYBOX_CONFIG_GETOPT
help
- Enable support for long options (option -l).
+ Enable support for long options (option -l).
config BUSYBOX_CONFIG_HEXDUMP
bool "hexdump"
default BUSYBOX_DEFAULT_HEXDUMP
help
- The hexdump utility is used to display binary data in a readable
- way that is comparable to the output from most hex editors.
+ The hexdump utility is used to display binary data in a readable
+ way that is comparable to the output from most hex editors.
config BUSYBOX_CONFIG_FEATURE_HEXDUMP_REVERSE
bool "Support -R, reverse of 'hexdump -Cv'"
default BUSYBOX_DEFAULT_FEATURE_HEXDUMP_REVERSE
depends on BUSYBOX_CONFIG_HEXDUMP
help
- The hexdump utility is used to display binary data in an ascii
- readable way. This option creates binary data from an ascii input.
- NB: this option is non-standard. It's unwise to use it in scripts
- aimed to be portable.
+ The hexdump utility is used to display binary data in an ascii
+ readable way. This option creates binary data from an ascii input.
+ NB: this option is non-standard. It's unwise to use it in scripts
+ aimed to be portable.
config BUSYBOX_CONFIG_HD
bool "hd"
default BUSYBOX_DEFAULT_HD
help
- hd is an alias to hexdump -C.
+ hd is an alias to hexdump -C.
config BUSYBOX_CONFIG_XXD
bool "xxd"
default BUSYBOX_DEFAULT_XXD
help
- The xxd utility is used to display binary data in a readable
- way that is comparable to the output from most hex editors.
+ The xxd utility is used to display binary data in a readable
+ way that is comparable to the output from most hex editors.
config BUSYBOX_CONFIG_HWCLOCK
bool "hwclock"
default BUSYBOX_DEFAULT_HWCLOCK
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- The hwclock utility is used to read and set the hardware clock
- on a system. This is primarily used to set the current time on
- shutdown in the hardware clock, so the hardware will keep the
- correct time when Linux is _not_ running.
+ The hwclock utility is used to read and set the hardware clock
+ on a system. This is primarily used to set the current time on
+ shutdown in the hardware clock, so the hardware will keep the
+ correct time when Linux is _not_ running.
config BUSYBOX_CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS
bool "Support long options (--hctosys,...)"
default BUSYBOX_DEFAULT_FEATURE_HWCLOCK_ADJTIME_FHS # util-linux-ng in Fedora 13 still uses /etc/adjtime
depends on BUSYBOX_CONFIG_HWCLOCK
help
- Starting with FHS 2.3, the adjtime state file is supposed to exist
- at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
- to use the FHS behavior, answer Y here, otherwise answer N for the
- classic /etc/adjtime path.
+ Starting with FHS 2.3, the adjtime state file is supposed to exist
+ at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
+ to use the FHS behavior, answer Y here, otherwise answer N for the
+ classic /etc/adjtime path.
- pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
+ pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
config BUSYBOX_CONFIG_IONICE
bool "ionice"
default BUSYBOX_DEFAULT_IONICE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Set/set program io scheduling class and priority
- Requires kernel >= 2.6.13
+ Set/set program io scheduling class and priority
+ Requires kernel >= 2.6.13
config BUSYBOX_CONFIG_IPCRM
bool "ipcrm"
default BUSYBOX_DEFAULT_IPCRM
help
- The ipcrm utility allows the removal of System V interprocess
- communication (IPC) objects and the associated data structures
- from the system.
+ The ipcrm utility allows the removal of System V interprocess
+ communication (IPC) objects and the associated data structures
+ from the system.
config BUSYBOX_CONFIG_IPCS
bool "ipcs"
default BUSYBOX_DEFAULT_IPCS
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- The ipcs utility is used to provide information on the currently
- allocated System V interprocess (IPC) objects in the system.
+ The ipcs utility is used to provide information on the currently
+ allocated System V interprocess (IPC) objects in the system.
config BUSYBOX_CONFIG_LAST
bool "last"
default BUSYBOX_DEFAULT_LAST
depends on BUSYBOX_CONFIG_FEATURE_WTMP
help
- 'last' displays a list of the last users that logged into the system.
+ 'last' displays a list of the last users that logged into the system.
config BUSYBOX_CONFIG_FEATURE_LAST_FANCY
bool "Output extra information"
default BUSYBOX_DEFAULT_FEATURE_LAST_FANCY
depends on BUSYBOX_CONFIG_LAST
help
- 'last' displays detailed information about the last users that
- logged into the system (mimics sysvinit last). +900 bytes.
+ 'last' displays detailed information about the last users that
+ logged into the system (mimics sysvinit last). +900 bytes.
config BUSYBOX_CONFIG_LOSETUP
bool "losetup"
default BUSYBOX_DEFAULT_LOSETUP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- losetup is used to associate or detach a loop device with a regular
- file or block device, and to query the status of a loop device. This
- version does not currently support enabling data encryption.
+ losetup is used to associate or detach a loop device with a regular
+ file or block device, and to query the status of a loop device. This
+ version does not currently support enabling data encryption.
config BUSYBOX_CONFIG_LSPCI
bool "lspci"
default BUSYBOX_DEFAULT_LSPCI
#select PLATFORM_LINUX
help
- lspci is a utility for displaying information about PCI buses in the
- system and devices connected to them.
+ lspci is a utility for displaying information about PCI buses in the
+ system and devices connected to them.
- This version uses sysfs (/sys/bus/pci/devices) only.
+ This version uses sysfs (/sys/bus/pci/devices) only.
config BUSYBOX_CONFIG_LSUSB
bool "lsusb"
default BUSYBOX_DEFAULT_LSUSB
#select PLATFORM_LINUX
help
- lsusb is a utility for displaying information about USB buses in the
- system and devices connected to them.
+ lsusb is a utility for displaying information about USB buses in the
+ system and devices connected to them.
- This version uses sysfs (/sys/bus/usb/devices) only.
+ This version uses sysfs (/sys/bus/usb/devices) only.
config BUSYBOX_CONFIG_MDEV
bool "mdev"
default BUSYBOX_DEFAULT_MDEV
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- mdev is a mini-udev implementation for dynamically creating device
- nodes in the /dev directory.
+ mdev is a mini-udev implementation for dynamically creating device
+ nodes in the /dev directory.
- For more information, please see docs/mdev.txt
+ For more information, please see docs/mdev.txt
config BUSYBOX_CONFIG_FEATURE_MDEV_CONF
bool "Support /etc/mdev.conf"
default BUSYBOX_DEFAULT_FEATURE_MDEV_CONF
depends on BUSYBOX_CONFIG_MDEV
help
- Add support for the mdev config file to control ownership and
- permissions of the device nodes.
+ Add support for the mdev config file to control ownership and
+ permissions of the device nodes.
- For more information, please see docs/mdev.txt
+ For more information, please see docs/mdev.txt
config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
bool "Support subdirs/symlinks"
default BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME
depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
help
- Add support for renaming devices and creating symlinks.
+ Add support for renaming devices and creating symlinks.
- For more information, please see docs/mdev.txt
+ For more information, please see docs/mdev.txt
config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME_REGEXP
bool "Support regular expressions substitutions when renaming device"
default BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME_REGEXP
depends on BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
help
- Add support for regular expressions substitutions when renaming
- device.
+ Add support for regular expressions substitutions when renaming
+ device.
config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC
bool "Support command execution at device addition/removal"
default BUSYBOX_DEFAULT_FEATURE_MDEV_EXEC
depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
help
- This adds support for an optional field to /etc/mdev.conf for
- executing commands when devices are created/removed.
+ This adds support for an optional field to /etc/mdev.conf for
+ executing commands when devices are created/removed.
- For more information, please see docs/mdev.txt
+ For more information, please see docs/mdev.txt
config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE
bool "Support loading of firmwares"
default BUSYBOX_DEFAULT_FEATURE_MDEV_LOAD_FIRMWARE
depends on BUSYBOX_CONFIG_MDEV
help
- Some devices need to load firmware before they can be usable.
+ Some devices need to load firmware before they can be usable.
- These devices will request userspace look up the files in
- /lib/firmware/ and if it exists, send it to the kernel for
- loading into the hardware.
+ These devices will request userspace look up the files in
+ /lib/firmware/ and if it exists, send it to the kernel for
+ loading into the hardware.
config BUSYBOX_CONFIG_MESG
bool "mesg"
default BUSYBOX_DEFAULT_MESG
help
- Mesg controls access to your terminal by others. It is typically
- used to allow or disallow other users to write to your terminal
+ Mesg controls access to your terminal by others. It is typically
+ used to allow or disallow other users to write to your terminal
config BUSYBOX_CONFIG_FEATURE_MESG_ENABLE_ONLY_GROUP
bool "Enable writing to tty only by group, not by everybody"
default BUSYBOX_DEFAULT_FEATURE_MESG_ENABLE_ONLY_GROUP
depends on BUSYBOX_CONFIG_MESG
help
- Usually, ttys are owned by group "tty", and "write" tool is
- setgid to this group. This way, "mesg y" only needs to enable
- "write by owning group" bit in tty mode.
+ Usually, ttys are owned by group "tty", and "write" tool is
+ setgid to this group. This way, "mesg y" only needs to enable
+ "write by owning group" bit in tty mode.
- If you set this option to N, "mesg y" will enable writing
- by anybody at all. This is not recommended.
+ If you set this option to N, "mesg y" will enable writing
+ by anybody at all. This is not recommended.
config BUSYBOX_CONFIG_MKE2FS
bool "mke2fs"
default BUSYBOX_DEFAULT_MKE2FS
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Utility to create EXT2 filesystems.
+ Utility to create EXT2 filesystems.
config BUSYBOX_CONFIG_MKFS_EXT2
bool "mkfs.ext2"
default BUSYBOX_DEFAULT_MKFS_EXT2
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Alias to "mke2fs".
+ Alias to "mke2fs".
config BUSYBOX_CONFIG_MKFS_MINIX
bool "mkfs_minix"
default BUSYBOX_DEFAULT_MKFS_MINIX
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- The minix filesystem is a nice, small, compact, read-write filesystem
- with little overhead. If you wish to be able to create minix
- filesystems this utility will do the job for you.
+ The minix filesystem is a nice, small, compact, read-write filesystem
+ with little overhead. If you wish to be able to create minix
+ filesystems this utility will do the job for you.
config BUSYBOX_CONFIG_FEATURE_MINIX2
bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"
default BUSYBOX_DEFAULT_FEATURE_MINIX2
depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
help
- If you wish to be able to create version 2 minix filesystems, enable
- this. If you enabled 'mkfs_minix' then you almost certainly want to
- be using the version 2 filesystem support.
+ If you wish to be able to create version 2 minix filesystems, enable
+ this. If you enabled 'mkfs_minix' then you almost certainly want to
+ be using the version 2 filesystem support.
config BUSYBOX_CONFIG_MKFS_REISER
bool "mkfs_reiser"
default BUSYBOX_DEFAULT_MKFS_REISER
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Utility to create ReiserFS filesystems.
- Note: this applet needs a lot of testing and polishing.
+ Utility to create ReiserFS filesystems.
+ Note: this applet needs a lot of testing and polishing.
config BUSYBOX_CONFIG_MKDOSFS
bool "mkdosfs"
default BUSYBOX_DEFAULT_MKDOSFS
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Utility to create FAT32 filesystems.
+ Utility to create FAT32 filesystems.
config BUSYBOX_CONFIG_MKFS_VFAT
bool "mkfs.vfat"
default BUSYBOX_DEFAULT_MKFS_VFAT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Alias to "mkdosfs".
+ Alias to "mkdosfs".
config BUSYBOX_CONFIG_MKSWAP
bool "mkswap"
default BUSYBOX_DEFAULT_MKSWAP
help
- The mkswap utility is used to configure a file or disk partition as
- Linux swap space. This allows Linux to use the entire file or
- partition as if it were additional RAM, which can greatly increase
- the capability of low-memory machines. This additional memory is
- much slower than real RAM, but can be very helpful at preventing your
- applications being killed by the Linux out of memory (OOM) killer.
- Once you have created swap space using 'mkswap' you need to enable
- the swap space using the 'swapon' utility.
+ The mkswap utility is used to configure a file or disk partition as
+ Linux swap space. This allows Linux to use the entire file or
+ partition as if it were additional RAM, which can greatly increase
+ the capability of low-memory machines. This additional memory is
+ much slower than real RAM, but can be very helpful at preventing your
+ applications being killed by the Linux out of memory (OOM) killer.
+ Once you have created swap space using 'mkswap' you need to enable
+ the swap space using the 'swapon' utility.
config BUSYBOX_CONFIG_FEATURE_MKSWAP_UUID
bool "UUID support"
default BUSYBOX_DEFAULT_FEATURE_MKSWAP_UUID
depends on BUSYBOX_CONFIG_MKSWAP
help
- Generate swap spaces with universally unique identifiers.
+ Generate swap spaces with universally unique identifiers.
config BUSYBOX_CONFIG_MORE
bool "more"
default BUSYBOX_DEFAULT_MORE
help
- more is a simple utility which allows you to read text one screen
- sized page at a time. If you want to read text that is larger than
- the screen, and you are using anything faster than a 300 baud modem,
- you will probably find this utility very helpful. If you don't have
- any need to reading text files, you can leave this disabled.
+ more is a simple utility which allows you to read text one screen
+ sized page at a time. If you want to read text that is larger than
+ the screen, and you are using anything faster than a 300 baud modem,
+ you will probably find this utility very helpful. If you don't have
+ any need to reading text files, you can leave this disabled.
config BUSYBOX_CONFIG_MOUNT
bool "mount"
default BUSYBOX_DEFAULT_MOUNT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- All files and filesystems in Unix are arranged into one big directory
- tree. The 'mount' utility is used to graft a filesystem onto a
- particular part of the tree. A filesystem can either live on a block
- device, or it can be accessible over the network, as is the case with
- NFS filesystems. Most people using BusyBox will also want to enable
- the 'mount' utility.
+ All files and filesystems in Unix are arranged into one big directory
+ tree. The 'mount' utility is used to graft a filesystem onto a
+ particular part of the tree. A filesystem can either live on a block
+ device, or it can be accessible over the network, as is the case with
+ NFS filesystems. Most people using BusyBox will also want to enable
+ the 'mount' utility.
config BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
bool "Support option -f"
default BUSYBOX_DEFAULT_FEATURE_MOUNT_FAKE
depends on BUSYBOX_CONFIG_MOUNT
help
- Enable support for faking a file system mount.
+ Enable support for faking a file system mount.
config BUSYBOX_CONFIG_FEATURE_MOUNT_VERBOSE
bool "Support option -v"
default BUSYBOX_DEFAULT_FEATURE_MOUNT_VERBOSE
depends on BUSYBOX_CONFIG_MOUNT
help
- Enable multi-level -v[vv...] verbose messages. Useful if you
- debug mount problems and want to see what is exactly passed
- to the kernel.
+ Enable multi-level -v[vv...] verbose messages. Useful if you
+ debug mount problems and want to see what is exactly passed
+ to the kernel.
config BUSYBOX_CONFIG_FEATURE_MOUNT_HELPERS
bool "Support mount helpers"
default BUSYBOX_DEFAULT_FEATURE_MOUNT_HELPERS
depends on BUSYBOX_CONFIG_MOUNT
help
- Enable mounting of virtual file systems via external helpers.
- E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
- "obexfs -b00.11.22.33.44.55 /mnt"
- Also "mount -t sometype [-o opts] fs /mnt" will try
- "sometype [-o opts] fs /mnt" if simple mount syscall fails.
- The idea is to use such virtual filesystems in /etc/fstab.
+ Enable mounting of virtual file systems via external helpers.
+ E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
+ "obexfs -b00.11.22.33.44.55 /mnt"
+ Also "mount -t sometype [-o opts] fs /mnt" will try
+ "sometype [-o opts] fs /mnt" if simple mount syscall fails.
+ The idea is to use such virtual filesystems in /etc/fstab.
config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL
bool "Support specifying devices by label or UUID"
depends on BUSYBOX_CONFIG_MOUNT
select BUSYBOX_CONFIG_VOLUMEID
help
- This allows for specifying a device by label or uuid, rather than by
- name. This feature utilizes the same functionality as blkid/findfs.
- This also enables label or uuid support for swapon.
+ This allows for specifying a device by label or uuid, rather than by
+ name. This feature utilizes the same functionality as blkid/findfs.
+ This also enables label or uuid support for swapon.
config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS
bool "Support mounting CIFS/SMB file systems"
default BUSYBOX_DEFAULT_FEATURE_MOUNT_CIFS
depends on BUSYBOX_CONFIG_MOUNT
help
- Enable support for samba mounts.
+ Enable support for samba mounts.
config BUSYBOX_CONFIG_FEATURE_MOUNT_FLAGS
depends on BUSYBOX_CONFIG_MOUNT
bool "Support lots of -o flags"
default BUSYBOX_DEFAULT_FEATURE_MOUNT_FLAGS
help
- Without this, mount only supports ro/rw/remount. With this, it
- supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
- noatime, diratime, nodiratime, loud, bind, move, shared, slave,
- private, unbindable, rshared, rslave, rprivate, and runbindable.
+ Without this, mount only supports ro/rw/remount. With this, it
+ supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
+ noatime, diratime, nodiratime, loud, bind, move, shared, slave,
+ private, unbindable, rshared, rslave, rprivate, and runbindable.
config BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
depends on BUSYBOX_CONFIG_MOUNT
bool "Support /etc/fstab and -a"
default BUSYBOX_DEFAULT_FEATURE_MOUNT_FSTAB
help
- Support mount all and looking for files in /etc/fstab.
+ Support mount all and looking for files in /etc/fstab.
config BUSYBOX_CONFIG_FEATURE_MOUNT_OTHERTAB
depends on BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
bool "Support -T <alt_fstab>"
default BUSYBOX_DEFAULT_FEATURE_MOUNT_OTHERTAB
help
- Support mount -T (specifying an alternate fstab)
+ Support mount -T (specifying an alternate fstab)
config BUSYBOX_CONFIG_MOUNTPOINT
bool "mountpoint"
default BUSYBOX_DEFAULT_MOUNTPOINT
help
- mountpoint checks if the directory is a mountpoint.
+ mountpoint checks if the directory is a mountpoint.
config BUSYBOX_CONFIG_NSENTER
bool "nsenter"
default BUSYBOX_DEFAULT_NSENTER
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Run program with namespaces of other processes.
+ Run program with namespaces of other processes.
config BUSYBOX_CONFIG_FEATURE_NSENTER_LONG_OPTS
bool "Enable long options"
default BUSYBOX_DEFAULT_FEATURE_NSENTER_LONG_OPTS
depends on BUSYBOX_CONFIG_NSENTER && BUSYBOX_CONFIG_LONG_OPTS
help
- Support long options for the nsenter applet. This makes
- the busybox implementation more compatible with upstream.
+ Support long options for the nsenter applet. This makes
+ the busybox implementation more compatible with upstream.
config BUSYBOX_CONFIG_PIVOT_ROOT
bool "pivot_root"
default BUSYBOX_DEFAULT_PIVOT_ROOT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- The pivot_root utility swaps the mount points for the root filesystem
- with some other mounted filesystem. This allows you to do all sorts
- of wild and crazy things with your Linux system and is far more
- powerful than 'chroot'.
+ The pivot_root utility swaps the mount points for the root filesystem
+ with some other mounted filesystem. This allows you to do all sorts
+ of wild and crazy things with your Linux system and is far more
+ powerful than 'chroot'.
- Note: This is for initrd in linux 2.4. Under initramfs (introduced
- in linux 2.6) use switch_root instead.
+ Note: This is for initrd in linux 2.4. Under initramfs (introduced
+ in linux 2.6) use switch_root instead.
config BUSYBOX_CONFIG_RDATE
bool "rdate"
default BUSYBOX_DEFAULT_RDATE
help
- The rdate utility allows you to synchronize the date and time of your
- system clock with the date and time of a remote networked system using
- the RFC868 protocol, which is built into the inetd daemon on most
- systems.
+ The rdate utility allows you to synchronize the date and time of your
+ system clock with the date and time of a remote networked system using
+ the RFC868 protocol, which is built into the inetd daemon on most
+ systems.
config BUSYBOX_CONFIG_RDEV
bool "rdev"
default BUSYBOX_DEFAULT_RDEV
help
- Print the device node associated with the filesystem mounted at '/'.
+ Print the device node associated with the filesystem mounted at '/'.
config BUSYBOX_CONFIG_READPROFILE
bool "readprofile"
default BUSYBOX_DEFAULT_READPROFILE
#select PLATFORM_LINUX
help
- This allows you to parse /proc/profile for basic profiling.
+ This allows you to parse /proc/profile for basic profiling.
config BUSYBOX_CONFIG_RENICE
bool "renice"
default BUSYBOX_DEFAULT_RENICE
help
- Renice alters the scheduling priority of one or more running
- processes.
+ Renice alters the scheduling priority of one or more running
+ processes.
config BUSYBOX_CONFIG_REV
bool "rev"
default BUSYBOX_DEFAULT_REV
help
- Reverse lines of a file or files.
+ Reverse lines of a file or files.
config BUSYBOX_CONFIG_RTCWAKE
bool "rtcwake"
default BUSYBOX_DEFAULT_RTCWAKE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Enter a system sleep state until specified wakeup time.
+ Enter a system sleep state until specified wakeup time.
config BUSYBOX_CONFIG_SCRIPT
bool "script"
default BUSYBOX_DEFAULT_SCRIPT
help
- The script makes typescript of terminal session.
+ The script makes typescript of terminal session.
config BUSYBOX_CONFIG_SCRIPTREPLAY
bool "scriptreplay"
default BUSYBOX_DEFAULT_SCRIPTREPLAY
help
- This program replays a typescript, using timing information
- given by script -t.
+ This program replays a typescript, using timing information
+ given by script -t.
config BUSYBOX_CONFIG_SETARCH
bool "setarch"
default BUSYBOX_DEFAULT_SETARCH
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- The linux32 utility is used to create a 32bit environment for the
- specified program (usually a shell). It only makes sense to have
- this util on a system that supports both 64bit and 32bit userland
- (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
+ The linux32 utility is used to create a 32bit environment for the
+ specified program (usually a shell). It only makes sense to have
+ this util on a system that supports both 64bit and 32bit userland
+ (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
config BUSYBOX_CONFIG_LINUX32
bool "linux32"
default BUSYBOX_DEFAULT_LINUX32
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Alias to "setarch linux32".
+ Alias to "setarch linux32".
config BUSYBOX_CONFIG_LINUX64
bool "linux64"
default BUSYBOX_DEFAULT_LINUX64
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Alias to "setarch linux64".
+ Alias to "setarch linux64".
config BUSYBOX_CONFIG_SETPRIV
bool "setpriv"
default BUSYBOX_DEFAULT_SETPRIV
select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_LONG_OPTS
help
- Run a program with different Linux privilege settings.
- Requires kernel >= 3.5
+ Run a program with different Linux privilege settings.
+ Requires kernel >= 3.5
config BUSYBOX_CONFIG_SETSID
bool "setsid"
default BUSYBOX_DEFAULT_SETSID
help
- setsid runs a program in a new session
+ setsid runs a program in a new session
config BUSYBOX_CONFIG_SWAPON
bool "swapon"
default BUSYBOX_DEFAULT_SWAPON
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- This option enables the 'swapon' utility.
- Once you have created some swap space using 'mkswap', you also need
- to enable your swap space with the 'swapon' utility. The 'swapoff'
- utility is used, typically at system shutdown, to disable any swap
- space. If you are not using any swap space, you can leave this
- option disabled.
+ This option enables the 'swapon' utility.
+ Once you have created some swap space using 'mkswap', you also need
+ to enable your swap space with the 'swapon' utility. The 'swapoff'
+ utility is used, typically at system shutdown, to disable any swap
+ space. If you are not using any swap space, you can leave this
+ option disabled.
config BUSYBOX_CONFIG_FEATURE_SWAPON_DISCARD
bool "Support discard option -d"
default BUSYBOX_DEFAULT_FEATURE_SWAPON_DISCARD
depends on BUSYBOX_CONFIG_SWAPON
help
- Enable support for discarding swap area blocks at swapon and/or as
- the kernel frees them. This option enables both the -d option on
- 'swapon' and the 'discard' option for swap entries in /etc/fstab.
+ Enable support for discarding swap area blocks at swapon and/or as
+ the kernel frees them. This option enables both the -d option on
+ 'swapon' and the 'discard' option for swap entries in /etc/fstab.
config BUSYBOX_CONFIG_FEATURE_SWAPON_PRI
bool "Support priority option -p"
default BUSYBOX_DEFAULT_FEATURE_SWAPON_PRI
depends on BUSYBOX_CONFIG_SWAPON
help
- Enable support for setting swap device priority in swapon.
+ Enable support for setting swap device priority in swapon.
config BUSYBOX_CONFIG_SWAPOFF
bool "swapoff"
default BUSYBOX_DEFAULT_SWAPOFF
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- This option enables the 'swapoff' utility.
+ This option enables the 'swapoff' utility.
config BUSYBOX_CONFIG_SWITCH_ROOT
bool "switch_root"
default BUSYBOX_DEFAULT_SWITCH_ROOT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- The switch_root utility is used from initramfs to select a new
- root device. Under initramfs, you have to use this instead of
- pivot_root. (Stop reading here if you don't care why.)
+ The switch_root utility is used from initramfs to select a new
+ root device. Under initramfs, you have to use this instead of
+ pivot_root. (Stop reading here if you don't care why.)
- Booting with initramfs extracts a gzipped cpio archive into rootfs
- (which is a variant of ramfs/tmpfs). Because rootfs can't be moved
- or unmounted*, pivot_root will not work from initramfs. Instead,
- switch_root deletes everything out of rootfs (including itself),
- does a mount --move that overmounts rootfs with the new root, and
- then execs the specified init program.
+ Booting with initramfs extracts a gzipped cpio archive into rootfs
+ (which is a variant of ramfs/tmpfs). Because rootfs can't be moved
+ or unmounted*, pivot_root will not work from initramfs. Instead,
+ switch_root deletes everything out of rootfs (including itself),
+ does a mount --move that overmounts rootfs with the new root, and
+ then execs the specified init program.
- * Because the Linux kernel uses rootfs internally as the starting
- and ending point for searching through the kernel's doubly linked
- list of active mount points. That's why.
+ * Because the Linux kernel uses rootfs internally as the starting
+ and ending point for searching through the kernel's doubly linked
+ list of active mount points. That's why.
config BUSYBOX_CONFIG_TASKSET
bool "taskset"
default BUSYBOX_DEFAULT_TASKSET
help
- Retrieve or set a processes's CPU affinity.
- This requires sched_{g,s}etaffinity support in your libc.
+ Retrieve or set a processes's CPU affinity.
+ This requires sched_{g,s}etaffinity support in your libc.
config BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY
bool "Fancy output"
default BUSYBOX_DEFAULT_FEATURE_TASKSET_FANCY
depends on BUSYBOX_CONFIG_TASKSET
help
- Needed for machines with more than 32-64 CPUs:
- affinity parameter 0xHHHHHHHHHHHHHHHHHHHH can be arbitrarily long
- in this case. Otherwise, it is limited to sizeof(long).
+ Needed for machines with more than 32-64 CPUs:
+ affinity parameter 0xHHHHHHHHHHHHHHHHHHHH can be arbitrarily long
+ in this case. Otherwise, it is limited to sizeof(long).
config BUSYBOX_CONFIG_UEVENT
bool "uevent"
default BUSYBOX_DEFAULT_UEVENT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- uevent is a netlink listener for kernel uevent notifications
- sent via netlink. It is usually used for dynamic device creation.
+ uevent is a netlink listener for kernel uevent notifications
+ sent via netlink. It is usually used for dynamic device creation.
config BUSYBOX_CONFIG_UMOUNT
bool "umount"
default BUSYBOX_DEFAULT_UMOUNT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- When you want to remove a mounted filesystem from its current mount
- point, for example when you are shutting down the system, the
- 'umount' utility is the tool to use. If you enabled the 'mount'
- utility, you almost certainly also want to enable 'umount'.
+ When you want to remove a mounted filesystem from its current mount
+ point, for example when you are shutting down the system, the
+ 'umount' utility is the tool to use. If you enabled the 'mount'
+ utility, you almost certainly also want to enable 'umount'.
config BUSYBOX_CONFIG_FEATURE_UMOUNT_ALL
bool "Support option -a"
default BUSYBOX_DEFAULT_FEATURE_UMOUNT_ALL
depends on BUSYBOX_CONFIG_UMOUNT
help
- Support -a option to unmount all currently mounted filesystems.
+ Support -a option to unmount all currently mounted filesystems.
config BUSYBOX_CONFIG_UNSHARE
bool "unshare"
default BUSYBOX_DEFAULT_UNSHARE
select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_LONG_OPTS
help
- Run program with some namespaces unshared from parent.
+ Run program with some namespaces unshared from parent.
config BUSYBOX_CONFIG_WALL
bool "wall"
default BUSYBOX_DEFAULT_WALL
depends on BUSYBOX_CONFIG_FEATURE_UTMP
help
- Write a message to all users that are logged in.
+ Write a message to all users that are logged in.
comment "Common options for mount/umount"
depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
default BUSYBOX_DEFAULT_FEATURE_MOUNT_LOOP
depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
help
- Enabling this feature allows automatic mounting of files (containing
- filesystem images) via the linux kernel's loopback devices.
- The mount command will detect you are trying to mount a file instead
- of a block device, and transparently associate the file with a
- loopback device. The umount command will also free that loopback
- device.
+ Enabling this feature allows automatic mounting of files (containing
+ filesystem images) via the linux kernel's loopback devices.
+ The mount command will detect you are trying to mount a file instead
+ of a block device, and transparently associate the file with a
+ loopback device. The umount command will also free that loopback
+ device.
- You can still use the 'losetup' utility (to manually associate files
- with loop devices) if you need to do something advanced, such as
- specify an offset or cryptographic options to the loopback device.
- (If you don't want umount to free the loop device, use "umount -D".)
+ You can still use the 'losetup' utility (to manually associate files
+ with loop devices) if you need to do something advanced, such as
+ specify an offset or cryptographic options to the loopback device.
+ (If you don't want umount to free the loop device, use "umount -D".)
config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP_CREATE
bool "Create new loopback devices if needed"
default BUSYBOX_DEFAULT_FEATURE_MOUNT_LOOP_CREATE
depends on BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP
help
- Linux kernels >= 2.6.24 support unlimited loopback devices. They are
- allocated for use when trying to use a loop device. The loop device
- must however exist.
+ Linux kernels >= 2.6.24 support unlimited loopback devices. They are
+ allocated for use when trying to use a loop device. The loop device
+ must however exist.
- This feature lets mount to try to create next /dev/loopN device
- if it does not find a free one.
+ This feature lets mount to try to create next /dev/loopN device
+ if it does not find a free one.
config BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT
bool "Support old /etc/mtab file"
depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
select BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
help
- Historically, Unix systems kept track of the currently mounted
- partitions in the file "/etc/mtab". These days, the kernel exports
- the list of currently mounted partitions in "/proc/mounts", rendering
- the old mtab file obsolete. (In modern systems, /etc/mtab should be
- a symlink to /proc/mounts.)
-
- The only reason to have mount maintain an /etc/mtab file itself is if
- your stripped-down embedded system does not have a /proc directory.
- If you must use this, keep in mind it's inherently brittle (for
- example a mount under chroot won't update it), can't handle modern
- features like separate per-process filesystem namespaces, requires
- that your /etc directory be writable, tends to get easily confused
- by --bind or --move mounts, won't update if you rename a directory
- that contains a mount point, and so on. (In brief: avoid.)
-
- About the only reason to use this is if you've removed /proc from
- your kernel.
+ Historically, Unix systems kept track of the currently mounted
+ partitions in the file "/etc/mtab". These days, the kernel exports
+ the list of currently mounted partitions in "/proc/mounts", rendering
+ the old mtab file obsolete. (In modern systems, /etc/mtab should be
+ a symlink to /proc/mounts.)
+
+ The only reason to have mount maintain an /etc/mtab file itself is if
+ your stripped-down embedded system does not have a /proc directory.
+ If you must use this, keep in mind it's inherently brittle (for
+ example a mount under chroot won't update it), can't handle modern
+ features like separate per-process filesystem namespaces, requires
+ that your /etc directory be writable, tends to get easily confused
+ by --bind or --move mounts, won't update if you rename a directory
+ that contains a mount point, and so on. (In brief: avoid.)
+
+ About the only reason to use this is if you've removed /proc from
+ your kernel.
source volume_id/Config.in
default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_EXFAT
depends on BUSYBOX_CONFIG_VOLUMEID
help
- exFAT (extended FAT) is a proprietary file system designed especially
- for flash drives. It has many features from NTFS, but with less
- overhead. exFAT is used on most SDXC cards for consumer electronics.
+ exFAT (extended FAT) is a proprietary file system designed especially
+ for flash drives. It has many features from NTFS, but with less
+ overhead. exFAT is used on most SDXC cards for consumer electronics.
config BUSYBOX_CONFIG_FEATURE_VOLUMEID_EXT
bool "Ext filesystem"
default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_EXT
default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_F2FS
depends on BUSYBOX_CONFIG_VOLUMEID
help
- F2FS (aka Flash-Friendly File System) is a log-structured file system,
- which is adapted to newer forms of storage. F2FS also remedies some
- known issues of the older log structured file systems, such as high
- cleaning overhead.
+ F2FS (aka Flash-Friendly File System) is a log-structured file system,
+ which is adapted to newer forms of storage. F2FS also remedies some
+ known issues of the older log structured file systems, such as high
+ cleaning overhead.
config BUSYBOX_CONFIG_FEATURE_VOLUMEID_FAT
bool "fat filesystem"
default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_FAT
default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_NILFS
depends on BUSYBOX_CONFIG_VOLUMEID
help
- NILFS is a New Implementation of a Log-Structured File System (LFS)
- that supports continuous snapshots. This provides features like
- versioning of the entire filesystem, restoration of files that
- were deleted a few minutes ago. NILFS keeps consistency like
- conventional LFS, so it provides quick recovery after system crashes.
+ NILFS is a New Implementation of a Log-Structured File System (LFS)
+ that supports continuous snapshots. This provides features like
+ versioning of the entire filesystem, restoration of files that
+ were deleted a few minutes ago. NILFS keeps consistency like
+ conventional LFS, so it provides quick recovery after system crashes.
- The possible use of NILFS includes versioning, tamper detection,
- SOX compliance logging, and so forth. It can serve as an alternative
- filesystem for Linux desktop environment, or as a basis of advanced
- storage appliances.
+ The possible use of NILFS includes versioning, tamper detection,
+ SOX compliance logging, and so forth. It can serve as an alternative
+ filesystem for Linux desktop environment, or as a basis of advanced
+ storage appliances.
config BUSYBOX_CONFIG_FEATURE_VOLUMEID_NTFS
bool "ntfs filesystem"
default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_NTFS
default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_SQUASHFS
depends on BUSYBOX_CONFIG_VOLUMEID && BUSYBOX_CONFIG_FEATURE_BLKID_TYPE
help
- Squashfs is a compressed read-only filesystem for Linux. Squashfs is
- intended for general read-only filesystem use and in constrained block
- device/memory systems (e.g. embedded systems) where low overhead is
- needed.
+ Squashfs is a compressed read-only filesystem for Linux. Squashfs is
+ intended for general read-only filesystem use and in constrained block
+ device/memory systems (e.g. embedded systems) where low overhead is
+ needed.
config BUSYBOX_CONFIG_FEATURE_VOLUMEID_SYSV
bool "sysv filesystem"
default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_SYSV
default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_UBIFS
depends on BUSYBOX_CONFIG_VOLUMEID
help
- UBIFS (Unsorted Block Image File System) is a file
- system for use with raw flash memory media.
+ UBIFS (Unsorted Block Image File System) is a file
+ system for use with raw flash memory media.
config BUSYBOX_CONFIG_FEATURE_VOLUMEID_UDF
bool "udf filesystem"
default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_UDF
projects / openwrt / staging / blogic.git / commitdiff