Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
config ARCH_MMP
- bool "Marvell PXA168"
+ bool "Marvell PXA168/910"
depends on MMU
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select TICK_ONESHOT
select PLAT_PXA
help
- Support for Marvell's PXA168 processor line.
+ Support for Marvell's PXA168/910 processor line.
config ARCH_RPC
bool "RiscPC"
if ARCH_MMP
-menu "Marvell PXA168 Implmentations"
+menu "Marvell PXA168/910 Implmentations"
config MACH_ASPENITE
bool "Marvell's PXA168 Aspenite Development Board"
help
Select code specific to PXA168
+config CPU_PXA910
+ bool
+ select CPU_MOHAWK
+ help
+ Select code specific to PXA910
+
endif
# SoC support
obj-$(CONFIG_CPU_PXA168) += pxa168.o
+obj-$(CONFIG_CPU_PXA910) += pxa910.o
# board support
obj-$(CONFIG_MACH_ASPENITE) += aspenite.o
extern void timer_init(int irq);
extern struct sys_timer pxa168_timer;
+extern struct sys_timer pxa910_timer;
extern void __init pxa168_init_irq(void);
+extern void __init pxa910_init_irq(void);
extern void __init icu_init_irq(void);
extern void __init pxa_map_io(void);
* CPU Stepping OLD_ID CPU_ID CHIP_ID
*
* PXA168 A0 0x41159263 0x56158400 0x00A0A333
+ * PXA910 Y0 0x41159262 0x56158000 0x00F0C910
*/
#ifdef CONFIG_CPU_PXA168
# define __cpu_is_pxa168(id) (0)
#endif
+#ifdef CONFIG_CPU_PXA910
+# define __cpu_is_pxa910(id) \
+ ({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x80; })
+#else
+# define __cpu_is_pxa910(id) (0)
+#endif
+
#define cpu_is_pxa168() ({ __cpu_is_pxa168(read_cpuid_id()); })
+#define cpu_is_pxa910() ({ __cpu_is_pxa910(read_cpuid_id()); })
#endif /* __ASM_MACH_CPUTYPE_H */
.dma = { _dma }, \
};
+#define PXA910_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...) \
+struct pxa_device_desc pxa910_device_##_name __initdata = { \
+ .dev_name = "pxa910-" #_name, \
+ .drv_name = _drv, \
+ .id = _id, \
+ .irq = IRQ_PXA910_##_irq, \
+ .start = _start, \
+ .size = _size, \
+ .dma = { _dma }, \
+};
extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
#define IRQ_PXA168_PMU 60
#define IRQ_PXA168_SM_INT 63
+/*
+ * Interrupt numbers for PXA910
+ */
+#define IRQ_PXA910_AIRQ 0
+#define IRQ_PXA910_SSP3 1
+#define IRQ_PXA910_SSP2 2
+#define IRQ_PXA910_SSP1 3
+#define IRQ_PXA910_PMIC_INT 4
+#define IRQ_PXA910_RTC_INT 5
+#define IRQ_PXA910_RTC_ALARM 6
+#define IRQ_PXA910_TWSI0 7
+#define IRQ_PXA910_GPU 8
+#define IRQ_PXA910_KEYPAD 9
+#define IRQ_PXA910_ROTARY 10
+#define IRQ_PXA910_TRACKBALL 11
+#define IRQ_PXA910_ONEWIRE 12
+#define IRQ_PXA910_AP1_TIMER1 13
+#define IRQ_PXA910_AP1_TIMER2 14
+#define IRQ_PXA910_AP1_TIMER3 15
+#define IRQ_PXA910_IPC_AP0 16
+#define IRQ_PXA910_IPC_AP1 17
+#define IRQ_PXA910_IPC_AP2 18
+#define IRQ_PXA910_IPC_AP3 19
+#define IRQ_PXA910_IPC_AP4 20
+#define IRQ_PXA910_IPC_CP0 21
+#define IRQ_PXA910_IPC_CP1 22
+#define IRQ_PXA910_IPC_CP2 23
+#define IRQ_PXA910_IPC_CP3 24
+#define IRQ_PXA910_IPC_CP4 25
+#define IRQ_PXA910_L2_DDR 26
+#define IRQ_PXA910_UART2 27
+#define IRQ_PXA910_UART3 28
+#define IRQ_PXA910_AP2_TIMER1 29
+#define IRQ_PXA910_AP2_TIMER2 30
+#define IRQ_PXA910_CP2_TIMER1 31
+#define IRQ_PXA910_CP2_TIMER2 32
+#define IRQ_PXA910_CP2_TIMER3 33
+#define IRQ_PXA910_GSSP 34
+#define IRQ_PXA910_CP2_WDT 35
+#define IRQ_PXA910_MAIN_PMU 36
+#define IRQ_PXA910_CP_FREQ_CHG 37
+#define IRQ_PXA910_AP_FREQ_CHG 38
+#define IRQ_PXA910_MMC 39
+#define IRQ_PXA910_AEU 40
+#define IRQ_PXA910_LCD 41
+#define IRQ_PXA910_CCIC 42
+#define IRQ_PXA910_IRE 43
+#define IRQ_PXA910_USB1 44
+#define IRQ_PXA910_NAND 45
+#define IRQ_PXA910_HIFI_DMA 46
+#define IRQ_PXA910_DMA_INT0 47
+#define IRQ_PXA910_DMA_INT1 48
+#define IRQ_PXA910_AP_GPIO 49
+#define IRQ_PXA910_AP2_TIMER3 50
+#define IRQ_PXA910_USB2 51
+#define IRQ_PXA910_TWSI1 54
+#define IRQ_PXA910_CP_GPIO 55
+#define IRQ_PXA910_UART1 59 /* Slow UART */
+#define IRQ_PXA910_AP_PMU 60
+#define IRQ_PXA910_SM_INT 63 /* from PinMux */
+
#define IRQ_GPIO_START 64
#define IRQ_GPIO_NUM 128
#define IRQ_GPIO(x) (IRQ_GPIO_START + (x))
--- /dev/null
+#ifndef __ASM_MACH_MFP_PXA910_H
+#define __ASM_MACH_MFP_PXA910_H
+
+#include <mach/mfp.h>
+
+/* UART2 */
+#define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF6)
+#define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF6)
+
+/* UART3 */
+#define GPIO31_UART3_RXD MFP_CFG(GPIO31, AF4)
+#define GPIO32_UART3_TXD MFP_CFG(GPIO32, AF4)
+
+/*IRDA*/
+#define GPIO51_IRDA_SHDN MFP_CFG(GPIO51, AF0)
+
+/* SMC */
+#define SM_nCS0_nCS0 MFP_CFG(SM_nCS0, AF0)
+#define SM_ADV_SM_ADV MFP_CFG(SM_ADV, AF0)
+#define SM_SCLK_SM_SCLK MFP_CFG(SM_SCLK, AF0)
+#define SM_SCLK_SM_SCLK MFP_CFG(SM_SCLK, AF0)
+#define SM_BE0_SM_BE0 MFP_CFG(SM_BE0, AF1)
+#define SM_BE1_SM_BE1 MFP_CFG(SM_BE1, AF1)
+
+/* I2C */
+#define GPIO53_CI2C_SCL MFP_CFG(GPIO53, AF2)
+#define GPIO54_CI2C_SDA MFP_CFG(GPIO54, AF2)
+
+/* SSP1 (I2S) */
+#define GPIO24_SSP1_SDATA_IN MFP_CFG_DRV(GPIO24, AF1, MEDIUM)
+#define GPIO21_SSP1_BITCLK MFP_CFG_DRV(GPIO21, AF1, MEDIUM)
+#define GPIO20_SSP1_SYSCLK MFP_CFG_DRV(GPIO20, AF1, MEDIUM)
+#define GPIO22_SSP1_SYNC MFP_CFG_DRV(GPIO22, AF1, MEDIUM)
+#define GPIO23_SSP1_DATA_OUT MFP_CFG_DRV(GPIO23, AF1, MEDIUM)
+#define GPIO124_MN_CLK_OUT MFP_CFG_DRV(GPIO124, AF1, MEDIUM)
+#define GPIO123_CLK_REQ MFP_CFG_DRV(GPIO123, AF0, MEDIUM)
+
+/* DFI */
+#define DF_IO0_ND_IO0 MFP_CFG(DF_IO0, AF0)
+#define DF_IO1_ND_IO1 MFP_CFG(DF_IO1, AF0)
+#define DF_IO2_ND_IO2 MFP_CFG(DF_IO2, AF0)
+#define DF_IO3_ND_IO3 MFP_CFG(DF_IO3, AF0)
+#define DF_IO4_ND_IO4 MFP_CFG(DF_IO4, AF0)
+#define DF_IO5_ND_IO5 MFP_CFG(DF_IO5, AF0)
+#define DF_IO6_ND_IO6 MFP_CFG(DF_IO6, AF0)
+#define DF_IO7_ND_IO7 MFP_CFG(DF_IO7, AF0)
+#define DF_IO8_ND_IO8 MFP_CFG(DF_IO8, AF0)
+#define DF_IO9_ND_IO9 MFP_CFG(DF_IO9, AF0)
+#define DF_IO10_ND_IO10 MFP_CFG(DF_IO10, AF0)
+#define DF_IO11_ND_IO11 MFP_CFG(DF_IO11, AF0)
+#define DF_IO12_ND_IO12 MFP_CFG(DF_IO12, AF0)
+#define DF_IO13_ND_IO13 MFP_CFG(DF_IO13, AF0)
+#define DF_IO14_ND_IO14 MFP_CFG(DF_IO14, AF0)
+#define DF_IO15_ND_IO15 MFP_CFG(DF_IO15, AF0)
+#define DF_nCS0_SM_nCS2_nCS0 MFP_CFG(DF_nCS0_SM_nCS2, AF0)
+#define DF_ALE_SM_WEn_ND_ALE MFP_CFG(DF_ALE_SM_WEn, AF1)
+#define DF_CLE_SM_OEn_ND_CLE MFP_CFG(DF_CLE_SM_OEn, AF0)
+#define DF_WEn_DF_WEn MFP_CFG(DF_WEn, AF1)
+#define DF_REn_DF_REn MFP_CFG(DF_REn, AF1)
+#define DF_RDY0_DF_RDY0 MFP_CFG(DF_RDY0, AF0)
+
+/*keypad*/
+#define GPIO00_KP_MKIN0 MFP_CFG(GPIO0, AF1)
+#define GPIO01_KP_MKOUT0 MFP_CFG(GPIO1, AF1)
+#define GPIO02_KP_MKIN1 MFP_CFG(GPIO2, AF1)
+#define GPIO03_KP_MKOUT1 MFP_CFG(GPIO3, AF1)
+#define GPIO04_KP_MKIN2 MFP_CFG(GPIO4, AF1)
+#define GPIO05_KP_MKOUT2 MFP_CFG(GPIO5, AF1)
+#define GPIO06_KP_MKIN3 MFP_CFG(GPIO6, AF1)
+#define GPIO07_KP_MKOUT3 MFP_CFG(GPIO7, AF1)
+#define GPIO08_KP_MKIN4 MFP_CFG(GPIO8, AF1)
+#define GPIO09_KP_MKOUT4 MFP_CFG(GPIO9, AF1)
+#define GPIO10_KP_MKIN5 MFP_CFG(GPIO10, AF1)
+#define GPIO11_KP_MKOUT5 MFP_CFG(GPIO11, AF1)
+#define GPIO12_KP_MKIN6 MFP_CFG(GPIO12, AF1)
+#define GPIO13_KP_MKOUT6 MFP_CFG(GPIO13, AF1)
+#define GPIO14_KP_MKIN7 MFP_CFG(GPIO14, AF1)
+#define GPIO15_KP_MKOUT7 MFP_CFG(GPIO15, AF1)
+#define GPIO16_KP_DKIN0 MFP_CFG(GPIO16, AF1)
+#define GPIO17_KP_DKIN1 MFP_CFG(GPIO17, AF1)
+#define GPIO18_KP_DKIN2 MFP_CFG(GPIO18, AF1)
+#define GPIO19_KP_DKIN3 MFP_CFG(GPIO19, AF1)
+
+/* LCD */
+#define GPIO81_LCD_FCLK MFP_CFG(GPIO81, AF1)
+#define GPIO82_LCD_LCLK MFP_CFG(GPIO82, AF1)
+#define GPIO83_LCD_PCLK MFP_CFG(GPIO83, AF1)
+#define GPIO84_LCD_DENA MFP_CFG(GPIO84, AF1)
+#define GPIO85_LCD_DD0 MFP_CFG(GPIO85, AF1)
+#define GPIO86_LCD_DD1 MFP_CFG(GPIO86, AF1)
+#define GPIO87_LCD_DD2 MFP_CFG(GPIO87, AF1)
+#define GPIO88_LCD_DD3 MFP_CFG(GPIO88, AF1)
+#define GPIO89_LCD_DD4 MFP_CFG(GPIO89, AF1)
+#define GPIO90_LCD_DD5 MFP_CFG(GPIO90, AF1)
+#define GPIO91_LCD_DD6 MFP_CFG(GPIO91, AF1)
+#define GPIO92_LCD_DD7 MFP_CFG(GPIO92, AF1)
+#define GPIO93_LCD_DD8 MFP_CFG(GPIO93, AF1)
+#define GPIO94_LCD_DD9 MFP_CFG(GPIO94, AF1)
+#define GPIO95_LCD_DD10 MFP_CFG(GPIO95, AF1)
+#define GPIO96_LCD_DD11 MFP_CFG(GPIO96, AF1)
+#define GPIO97_LCD_DD12 MFP_CFG(GPIO97, AF1)
+#define GPIO98_LCD_DD13 MFP_CFG(GPIO98, AF1)
+#define GPIO100_LCD_DD14 MFP_CFG(GPIO100, AF1)
+#define GPIO101_LCD_DD15 MFP_CFG(GPIO101, AF1)
+#define GPIO102_LCD_DD16 MFP_CFG(GPIO102, AF1)
+#define GPIO103_LCD_DD17 MFP_CFG(GPIO103, AF1)
+#define GPIO104_LCD_DD18 MFP_CFG(GPIO104, AF1)
+#define GPIO105_LCD_DD19 MFP_CFG(GPIO105, AF1)
+#define GPIO106_LCD_DD20 MFP_CFG(GPIO106, AF1)
+#define GPIO107_LCD_DD21 MFP_CFG(GPIO107, AF1)
+#define GPIO108_LCD_DD22 MFP_CFG(GPIO108, AF1)
+#define GPIO109_LCD_DD23 MFP_CFG(GPIO109, AF1)
+
+#define GPIO104_LCD_SPIDOUT MFP_CFG(GPIO104, AF3)
+#define GPIO105_LCD_SPIDIN MFP_CFG(GPIO105, AF3)
+#define GPIO107_LCD_CS1 MFP_CFG(GPIO107, AF3)
+#define GPIO108_LCD_DCLK MFP_CFG(GPIO108, AF3)
+
+#define GPIO106_LCD_RESET MFP_CFG(GPIO106, AF0)
+
+/*smart panel*/
+#define GPIO82_LCD_A0 MFP_CFG(GPIO82, AF0)
+#define GPIO83_LCD_WR MFP_CFG(GPIO83, AF0)
+#define GPIO103_LCD_CS MFP_CFG(GPIO103, AF0)
+
+/*1wire*/
+#define GPIO106_1WIRE MFP_CFG(GPIO106, AF3)
+
+/*CCIC*/
+#define GPIO67_CCIC_IN7 MFP_CFG_DRV(GPIO67, AF1, MEDIUM)
+#define GPIO68_CCIC_IN6 MFP_CFG_DRV(GPIO68, AF1, MEDIUM)
+#define GPIO69_CCIC_IN5 MFP_CFG_DRV(GPIO69, AF1, MEDIUM)
+#define GPIO70_CCIC_IN4 MFP_CFG_DRV(GPIO70, AF1, MEDIUM)
+#define GPIO71_CCIC_IN3 MFP_CFG_DRV(GPIO71, AF1, MEDIUM)
+#define GPIO72_CCIC_IN2 MFP_CFG_DRV(GPIO72, AF1, MEDIUM)
+#define GPIO73_CCIC_IN1 MFP_CFG_DRV(GPIO73, AF1, MEDIUM)
+#define GPIO74_CCIC_IN0 MFP_CFG_DRV(GPIO74, AF1, MEDIUM)
+#define GPIO75_CAM_HSYNC MFP_CFG_DRV(GPIO75, AF1, MEDIUM)
+#define GPIO76_CAM_VSYNC MFP_CFG_DRV(GPIO76, AF1, MEDIUM)
+#define GPIO77_CAM_MCLK MFP_CFG_DRV(GPIO77, AF1, MEDIUM)
+#define GPIO78_CAM_PCLK MFP_CFG_DRV(GPIO78, AF1, MEDIUM)
+
+/* MMC1 */
+#define MMC1_DAT7_MMC1_DAT7 MFP_CFG_DRV(MMC1_DAT7, AF0, MEDIUM)
+#define MMC1_DAT6_MMC1_DAT6 MFP_CFG_DRV(MMC1_DAT6, AF0, MEDIUM)
+#define MMC1_DAT5_MMC1_DAT5 MFP_CFG_DRV(MMC1_DAT5, AF0, MEDIUM)
+#define MMC1_DAT4_MMC1_DAT4 MFP_CFG_DRV(MMC1_DAT4, AF0, MEDIUM)
+#define MMC1_DAT3_MMC1_DAT3 MFP_CFG_DRV(MMC1_DAT3, AF0, MEDIUM)
+#define MMC1_DAT2_MMC1_DAT2 MFP_CFG_DRV(MMC1_DAT2, AF0, MEDIUM)
+#define MMC1_DAT1_MMC1_DAT1 MFP_CFG_DRV(MMC1_DAT1, AF0, MEDIUM)
+#define MMC1_DAT0_MMC1_DAT0 MFP_CFG_DRV(MMC1_DAT0, AF0, MEDIUM)
+#define MMC1_CMD_MMC1_CMD MFP_CFG_DRV(MMC1_CMD, AF0, MEDIUM)
+#define MMC1_CLK_MMC1_CLK MFP_CFG_DRV(MMC1_CLK, AF0, MEDIUM)
+#define MMC1_CD_MMC1_CD MFP_CFG_DRV(MMC1_CD, AF0, MEDIUM)
+#define MMC1_WP_MMC1_WP MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
+
+#endif /* __ASM_MACH MFP_PXA910_H */
--- /dev/null
+#ifndef __ASM_MACH_PXA910_H
+#define __ASM_MACH_PXA910_H
+
+#include <mach/devices.h>
+
+extern struct pxa_device_desc pxa910_device_uart1;
+extern struct pxa_device_desc pxa910_device_uart2;
+
+static inline int pxa910_add_uart(int id)
+{
+ struct pxa_device_desc *d = NULL;
+
+ switch (id) {
+ case 1: d = &pxa910_device_uart1; break;
+ case 2: d = &pxa910_device_uart2; break;
+ }
+
+ if (d == NULL)
+ return -EINVAL;
+
+ return pxa_register_device(d, NULL, 0);
+}
+#endif /* __ASM_MACH_PXA910_H */
#define APBC_PXA168_UART3 APBC_REG(0x070)
#define APBC_PXA168_AC97 APBC_REG(0x084)
+/*
+ * APB Clock register offsets for PXA910
+ */
+#define APBC_PXA910_UART0 APBC_REG(0x000)
+#define APBC_PXA910_UART1 APBC_REG(0x004)
+#define APBC_PXA910_GPIO APBC_REG(0x008)
+#define APBC_PXA910_PWM0 APBC_REG(0x00c)
+#define APBC_PXA910_PWM1 APBC_REG(0x010)
+#define APBC_PXA910_PWM2 APBC_REG(0x014)
+#define APBC_PXA910_PWM3 APBC_REG(0x018)
+#define APBC_PXA910_SSP1 APBC_REG(0x01c)
+#define APBC_PXA910_SSP2 APBC_REG(0x020)
+#define APBC_PXA910_IPC APBC_REG(0x024)
+#define APBC_PXA910_TWSI0 APBC_REG(0x02c)
+#define APBC_PXA910_KPC APBC_REG(0x030)
+#define APBC_PXA910_TIMERS APBC_REG(0x034)
+#define APBC_PXA910_TBROT APBC_REG(0x038)
+#define APBC_PXA910_AIB APBC_REG(0x03c)
+#define APBC_PXA910_SW_JTAG APBC_REG(0x040)
+#define APBC_PXA910_TIMERS1 APBC_REG(0x044)
+#define APBC_PXA910_ONEWIRE APBC_REG(0x048)
+#define APBC_PXA910_SSP3 APBC_REG(0x04c)
+#define APBC_PXA910_ASFAR APBC_REG(0x050)
+#define APBC_PXA910_ASSAR APBC_REG(0x054)
+
/* Common APB clock register bit definitions */
#define APBC_APBCLK (1 << 0) /* APB Bus Clock Enable */
#define APBC_FNCLK (1 << 1) /* Functional Clock Enable */
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/pxa910.c
+ *
+ * Code specific to PXA910
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+
+#include <asm/mach/time.h>
+#include <mach/addr-map.h>
+#include <mach/regs-apbc.h>
+#include <mach/regs-apmu.h>
+#include <mach/cputype.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <mach/dma.h>
+#include <mach/mfp.h>
+#include <mach/devices.h>
+
+#include "common.h"
+#include "clock.h"
+
+#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000)
+
+static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
+{
+ MFP_ADDR_X(GPIO0, GPIO54, 0xdc),
+ MFP_ADDR_X(GPIO67, GPIO98, 0x1b8),
+ MFP_ADDR_X(GPIO100, GPIO109, 0x238),
+
+ MFP_ADDR(GPIO123, 0xcc),
+ MFP_ADDR(GPIO124, 0xd0),
+
+ MFP_ADDR(DF_IO0, 0x40),
+ MFP_ADDR(DF_IO1, 0x3c),
+ MFP_ADDR(DF_IO2, 0x38),
+ MFP_ADDR(DF_IO3, 0x34),
+ MFP_ADDR(DF_IO4, 0x30),
+ MFP_ADDR(DF_IO5, 0x2c),
+ MFP_ADDR(DF_IO6, 0x28),
+ MFP_ADDR(DF_IO7, 0x24),
+ MFP_ADDR(DF_IO8, 0x20),
+ MFP_ADDR(DF_IO9, 0x1c),
+ MFP_ADDR(DF_IO10, 0x18),
+ MFP_ADDR(DF_IO11, 0x14),
+ MFP_ADDR(DF_IO12, 0x10),
+ MFP_ADDR(DF_IO13, 0xc),
+ MFP_ADDR(DF_IO14, 0x8),
+ MFP_ADDR(DF_IO15, 0x4),
+
+ MFP_ADDR(DF_nCS0_SM_nCS2, 0x44),
+ MFP_ADDR(DF_nCS1_SM_nCS3, 0x48),
+ MFP_ADDR(SM_nCS0, 0x4c),
+ MFP_ADDR(SM_nCS1, 0x50),
+ MFP_ADDR(DF_WEn, 0x54),
+ MFP_ADDR(DF_REn, 0x58),
+ MFP_ADDR(DF_CLE_SM_OEn, 0x5c),
+ MFP_ADDR(DF_ALE_SM_WEn, 0x60),
+ MFP_ADDR(SM_SCLK, 0x64),
+ MFP_ADDR(DF_RDY0, 0x68),
+ MFP_ADDR(SM_BE0, 0x6c),
+ MFP_ADDR(SM_BE1, 0x70),
+ MFP_ADDR(SM_ADV, 0x74),
+ MFP_ADDR(DF_RDY1, 0x78),
+ MFP_ADDR(SM_ADVMUX, 0x7c),
+ MFP_ADDR(SM_RDY, 0x80),
+
+ MFP_ADDR_X(MMC1_DAT7, MMC1_WP, 0x84),
+
+ MFP_ADDR_END,
+};
+
+#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
+
+static void __init pxa910_init_gpio(void)
+{
+ int i;
+
+ /* enable GPIO clock */
+ __raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA910_GPIO);
+
+ /* unmask GPIO edge detection for all 4 banks - APMASKx */
+ for (i = 0; i < 4; i++)
+ __raw_writel(0xffffffff, APMASK(i));
+
+ pxa_init_gpio(IRQ_PXA910_AP_GPIO, 0, 127, NULL);
+}
+
+void __init pxa910_init_irq(void)
+{
+ icu_init_irq();
+ pxa910_init_gpio();
+}
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, PXA910_UART0, 1, 14745600);
+static APBC_CLK(uart2, PXA910_UART1, 1, 14745600);
+
+/* device and clock bindings */
+static struct clk_lookup pxa910_clkregs[] = {
+ INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+ INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+};
+
+static int __init pxa910_init(void)
+{
+ if (cpu_is_pxa910()) {
+ mfp_init_base(MFPR_VIRT_BASE);
+ mfp_init_addr(pxa910_mfp_addr_map);
+ pxa_init_dma(IRQ_PXA910_DMA_INT0, 32);
+ clks_register(ARRAY_AND_SIZE(pxa910_clkregs));
+ }
+
+ return 0;
+}
+postcore_initcall(pxa910_init);
+
+/* system timer - clock enabled, 3.25MHz */
+#define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
+
+static void __init pxa910_timer_init(void)
+{
+ /* reset and configure */
+ __raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA910_TIMERS);
+ __raw_writel(TIMER_CLK_RST, APBC_PXA910_TIMERS);
+
+ timer_init(IRQ_PXA910_AP1_TIMER1);
+}
+
+struct sys_timer pxa910_timer = {
+ .init = pxa910_timer_init,
+};
+
+/* on-chip devices */
+
+/* NOTE: there are totally 3 UARTs on PXA910:
+ *
+ * UART1 - Slow UART (can be used both by AP and CP)
+ * UART2/3 - Fast UART
+ *
+ * To be backward compatible with the legacy FFUART/BTUART/STUART sequence,
+ * they are re-ordered as:
+ *
+ * pxa910_device_uart1 - UART2 as FFUART
+ * pxa910_device_uart2 - UART3 as BTUART
+ *
+ * UART1 is not used by AP for the moment.
+ */
+PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
+PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
MFP_PIN_DF_IO13,
MFP_PIN_DF_IO14,
MFP_PIN_DF_IO15,
+ MFP_PIN_DF_nCS0_SM_nCS2,
+ MFP_PIN_DF_nCS1_SM_nCS3,
+ MFP_PIN_SM_nCS0,
+ MFP_PIN_SM_nCS1,
+ MFP_PIN_DF_WEn,
+ MFP_PIN_DF_REn,
+ MFP_PIN_DF_CLE_SM_OEn,
+ MFP_PIN_DF_ALE_SM_WEn,
+ MFP_PIN_DF_RDY0,
+ MFP_PIN_DF_RDY1,
+
+ MFP_PIN_SM_SCLK,
+ MFP_PIN_SM_BE0,
+ MFP_PIN_SM_BE1,
+ MFP_PIN_SM_ADV,
+ MFP_PIN_SM_ADVMUX,
+ MFP_PIN_SM_RDY,
+
+ MFP_PIN_MMC1_DAT7,
+ MFP_PIN_MMC1_DAT6,
+ MFP_PIN_MMC1_DAT5,
+ MFP_PIN_MMC1_DAT4,
+ MFP_PIN_MMC1_DAT3,
+ MFP_PIN_MMC1_DAT2,
+ MFP_PIN_MMC1_DAT1,
+ MFP_PIN_MMC1_DAT0,
+ MFP_PIN_MMC1_CMD,
+ MFP_PIN_MMC1_CLK,
+ MFP_PIN_MMC1_CD,
+ MFP_PIN_MMC1_WP,
/* additional pins on PXA930 */
MFP_PIN_GSIM_UIO,
projects / openwrt / staging / blogic.git / commitdiff