They're already in linux.git, so they shouldn't be in pending.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
--- /dev/null
+From patchwork Mon Mar 5 21:40:25 2018
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [net,v2,1/6] e1000e: Remove Other from EIAC
+X-Patchwork-Submitter: "Kirsher, Jeffrey T" <jeffrey.t.kirsher@intel.com>
+X-Patchwork-Id: 881773
+X-Patchwork-Delegate: davem@davemloft.net
+Message-Id: <20180305214030.25141-2-jeffrey.t.kirsher@intel.com>
+To: davem@davemloft.net
+Cc: Benjamin Poirier <bpoirier@suse.com>, netdev@vger.kernel.org,
+ nhorman@redhat.com, sassmann@redhat.com, jogreene@redhat.com,
+ Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+Date: Mon, 5 Mar 2018 13:40:25 -0800
+From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+List-Id: <netdev.vger.kernel.org>
+
+From: Benjamin Poirier <bpoirier@suse.com>
+
+It was reported that emulated e1000e devices in vmware esxi 6.5 Build
+7526125 do not link up after commit 4aea7a5c5e94 ("e1000e: Avoid receiver
+overrun interrupt bursts", v4.15-rc1). Some tracing shows that after
+e1000e_trigger_lsc() is called, ICR reads out as 0x0 in e1000_msix_other()
+on emulated e1000e devices. In comparison, on real e1000e 82574 hardware,
+icr=0x80000004 (_INT_ASSERTED | _LSC) in the same situation.
+
+Some experimentation showed that this flaw in vmware e1000e emulation can
+be worked around by not setting Other in EIAC. This is how it was before
+16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1).
+
+Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts")
+Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
+Tested-by: Aaron Brown <aaron.f.brown@intel.com>
+Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+---
+ drivers/net/ethernet/intel/e1000e/netdev.c | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/ethernet/intel/e1000e/netdev.c
++++ b/drivers/net/ethernet/intel/e1000e/netdev.c
+@@ -1914,6 +1914,8 @@ static irqreturn_t e1000_msix_other(int
+ bool enable = true;
+
+ icr = er32(ICR);
++ ew32(ICR, E1000_ICR_OTHER);
++
+ if (icr & E1000_ICR_RXO) {
+ ew32(ICR, E1000_ICR_RXO);
+ enable = false;
+@@ -2036,7 +2038,6 @@ static void e1000_configure_msix(struct
+ hw->hw_addr + E1000_EITR_82574(vector));
+ else
+ writel(1, hw->hw_addr + E1000_EITR_82574(vector));
+- adapter->eiac_mask |= E1000_IMS_OTHER;
+
+ /* Cause Tx interrupts on every write back */
+ ivar |= BIT(31);
+@@ -2261,7 +2262,7 @@ static void e1000_irq_enable(struct e100
+
+ if (adapter->msix_entries) {
+ ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
+- ew32(IMS, adapter->eiac_mask | E1000_IMS_LSC);
++ ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
+ } else if (hw->mac.type >= e1000_pch_lpt) {
+ ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER);
+ } else {
--- /dev/null
+From patchwork Mon Mar 5 21:40:26 2018
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [net, v2,
+ 2/6] Partial revert "e1000e: Avoid receiver overrun interrupt bursts"
+X-Patchwork-Submitter: "Kirsher, Jeffrey T" <jeffrey.t.kirsher@intel.com>
+X-Patchwork-Id: 881769
+X-Patchwork-Delegate: davem@davemloft.net
+Message-Id: <20180305214030.25141-3-jeffrey.t.kirsher@intel.com>
+To: davem@davemloft.net
+Cc: Benjamin Poirier <bpoirier@suse.com>, netdev@vger.kernel.org,
+ nhorman@redhat.com, sassmann@redhat.com, jogreene@redhat.com,
+ Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+Date: Mon, 5 Mar 2018 13:40:26 -0800
+From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+List-Id: <netdev.vger.kernel.org>
+
+From: Benjamin Poirier <bpoirier@suse.com>
+
+This partially reverts commit 4aea7a5c5e940c1723add439f4088844cd26196d.
+
+We keep the fix for the first part of the problem (1) described in the log
+of that commit, that is to read ICR in the other interrupt handler. We
+remove the fix for the second part of the problem (2), Other interrupt
+throttling.
+
+Bursts of "Other" interrupts may once again occur during rxo (receive
+overflow) traffic conditions. This is deemed acceptable in the interest of
+avoiding unforeseen fallout from changes that are not strictly necessary.
+As discussed, the e1000e driver should be in "maintenance mode".
+
+Link: https://www.spinics.net/lists/netdev/msg480675.html
+Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
+Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
+Tested-by: Aaron Brown <aaron.f.brown@intel.com>
+Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+---
+ drivers/net/ethernet/intel/e1000e/netdev.c | 16 ++--------------
+ 1 file changed, 2 insertions(+), 14 deletions(-)
+
+--- a/drivers/net/ethernet/intel/e1000e/netdev.c
++++ b/drivers/net/ethernet/intel/e1000e/netdev.c
+@@ -1911,21 +1911,10 @@ static irqreturn_t e1000_msix_other(int
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 icr;
+- bool enable = true;
+
+ icr = er32(ICR);
+ ew32(ICR, E1000_ICR_OTHER);
+
+- if (icr & E1000_ICR_RXO) {
+- ew32(ICR, E1000_ICR_RXO);
+- enable = false;
+- /* napi poll will re-enable Other, make sure it runs */
+- if (napi_schedule_prep(&adapter->napi)) {
+- adapter->total_rx_bytes = 0;
+- adapter->total_rx_packets = 0;
+- __napi_schedule(&adapter->napi);
+- }
+- }
+ if (icr & E1000_ICR_LSC) {
+ ew32(ICR, E1000_ICR_LSC);
+ hw->mac.get_link_status = true;
+@@ -1934,7 +1923,7 @@ static irqreturn_t e1000_msix_other(int
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+- if (enable && !test_bit(__E1000_DOWN, &adapter->state))
++ if (!test_bit(__E1000_DOWN, &adapter->state))
+ ew32(IMS, E1000_IMS_OTHER);
+
+ return IRQ_HANDLED;
+@@ -2704,8 +2693,7 @@ static int e1000e_poll(struct napi_struc
+ napi_complete_done(napi, work_done);
+ if (!test_bit(__E1000_DOWN, &adapter->state)) {
+ if (adapter->msix_entries)
+- ew32(IMS, adapter->rx_ring->ims_val |
+- E1000_IMS_OTHER);
++ ew32(IMS, adapter->rx_ring->ims_val);
+ else
+ e1000_irq_enable(adapter);
+ }
--- /dev/null
+From patchwork Mon Mar 5 21:40:27 2018
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [net, v2,
+ 3/6] e1000e: Fix queue interrupt re-raising in Other interrupt
+X-Patchwork-Submitter: "Kirsher, Jeffrey T" <jeffrey.t.kirsher@intel.com>
+X-Patchwork-Id: 881775
+X-Patchwork-Delegate: davem@davemloft.net
+Message-Id: <20180305214030.25141-4-jeffrey.t.kirsher@intel.com>
+To: davem@davemloft.net
+Cc: Benjamin Poirier <bpoirier@suse.com>, netdev@vger.kernel.org,
+ nhorman@redhat.com, sassmann@redhat.com, jogreene@redhat.com,
+ Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+Date: Mon, 5 Mar 2018 13:40:27 -0800
+From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+List-Id: <netdev.vger.kernel.org>
+
+From: Benjamin Poirier <bpoirier@suse.com>
+
+Restores the ICS write for Rx/Tx queue interrupts which was present before
+commit 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1)
+but was not restored in commit 4aea7a5c5e94
+("e1000e: Avoid receiver overrun interrupt bursts", v4.15-rc1).
+
+This re-raises the queue interrupts in case the txq or rxq bits were set in
+ICR and the Other interrupt handler read and cleared ICR before the queue
+interrupt was raised.
+
+Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts")
+Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
+Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
+Tested-by: Aaron Brown <aaron.f.brown@intel.com>
+Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+---
+ drivers/net/ethernet/intel/e1000e/netdev.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/net/ethernet/intel/e1000e/netdev.c
++++ b/drivers/net/ethernet/intel/e1000e/netdev.c
+@@ -1915,6 +1915,9 @@ static irqreturn_t e1000_msix_other(int
+ icr = er32(ICR);
+ ew32(ICR, E1000_ICR_OTHER);
+
++ if (icr & adapter->eiac_mask)
++ ew32(ICS, (icr & adapter->eiac_mask));
++
+ if (icr & E1000_ICR_LSC) {
+ ew32(ICR, E1000_ICR_LSC);
+ hw->mac.get_link_status = true;
--- /dev/null
+From patchwork Mon Mar 5 21:40:28 2018
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [net,v2,4/6] e1000e: Avoid missed interrupts following ICR read
+X-Patchwork-Submitter: "Kirsher, Jeffrey T" <jeffrey.t.kirsher@intel.com>
+X-Patchwork-Id: 881771
+X-Patchwork-Delegate: davem@davemloft.net
+Message-Id: <20180305214030.25141-5-jeffrey.t.kirsher@intel.com>
+To: davem@davemloft.net
+Cc: Benjamin Poirier <bpoirier@suse.com>, netdev@vger.kernel.org,
+ nhorman@redhat.com, sassmann@redhat.com, jogreene@redhat.com,
+ Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+Date: Mon, 5 Mar 2018 13:40:28 -0800
+From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+List-Id: <netdev.vger.kernel.org>
+
+From: Benjamin Poirier <bpoirier@suse.com>
+
+The 82574 specification update errata 12 states that interrupts may be
+missed if ICR is read while INT_ASSERTED is not set. Avoid that problem by
+setting all bits related to events that can trigger the Other interrupt in
+IMS.
+
+The Other interrupt is raised for such events regardless of whether or not
+they are set in IMS. However, only when they are set is the INT_ASSERTED
+bit also set in ICR.
+
+By doing this, we ensure that INT_ASSERTED is always set when we read ICR
+in e1000_msix_other() and steer clear of the errata. This also ensures that
+ICR will automatically be cleared on read, therefore we no longer need to
+clear bits explicitly.
+
+Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
+Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
+Tested-by: Aaron Brown <aaron.f.brown@intel.com>
+Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+---
+ drivers/net/ethernet/intel/e1000e/defines.h | 21 ++++++++++++++++++++-
+ drivers/net/ethernet/intel/e1000e/netdev.c | 11 ++++-------
+ 2 files changed, 24 insertions(+), 8 deletions(-)
+
+--- a/drivers/net/ethernet/intel/e1000e/defines.h
++++ b/drivers/net/ethernet/intel/e1000e/defines.h
+@@ -400,6 +400,10 @@
+ #define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */
+ #define E1000_ICR_RXO 0x00000040 /* Receiver Overrun */
+ #define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */
++#define E1000_ICR_MDAC 0x00000200 /* MDIO Access Complete */
++#define E1000_ICR_SRPD 0x00010000 /* Small Receive Packet Detected */
++#define E1000_ICR_ACK 0x00020000 /* Receive ACK Frame Detected */
++#define E1000_ICR_MNG 0x00040000 /* Manageability Event Detected */
+ #define E1000_ICR_ECCER 0x00400000 /* Uncorrectable ECC Error */
+ /* If this bit asserted, the driver should claim the interrupt */
+ #define E1000_ICR_INT_ASSERTED 0x80000000
+@@ -407,7 +411,7 @@
+ #define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */
+ #define E1000_ICR_TXQ0 0x00400000 /* Tx Queue 0 Interrupt */
+ #define E1000_ICR_TXQ1 0x00800000 /* Tx Queue 1 Interrupt */
+-#define E1000_ICR_OTHER 0x01000000 /* Other Interrupts */
++#define E1000_ICR_OTHER 0x01000000 /* Other Interrupt */
+
+ /* PBA ECC Register */
+ #define E1000_PBA_ECC_COUNTER_MASK 0xFFF00000 /* ECC counter mask */
+@@ -431,12 +435,27 @@
+ E1000_IMS_RXSEQ | \
+ E1000_IMS_LSC)
+
++/* These are all of the events related to the OTHER interrupt.
++ */
++#define IMS_OTHER_MASK ( \
++ E1000_IMS_LSC | \
++ E1000_IMS_RXO | \
++ E1000_IMS_MDAC | \
++ E1000_IMS_SRPD | \
++ E1000_IMS_ACK | \
++ E1000_IMS_MNG)
++
+ /* Interrupt Mask Set */
+ #define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+ #define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
+ #define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */
+ #define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */
++#define E1000_IMS_RXO E1000_ICR_RXO /* Receiver Overrun */
+ #define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */
++#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO Access Complete */
++#define E1000_IMS_SRPD E1000_ICR_SRPD /* Small Receive Packet */
++#define E1000_IMS_ACK E1000_ICR_ACK /* Receive ACK Frame Detected */
++#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability Event */
+ #define E1000_IMS_ECCER E1000_ICR_ECCER /* Uncorrectable ECC Error */
+ #define E1000_IMS_RXQ0 E1000_ICR_RXQ0 /* Rx Queue 0 Interrupt */
+ #define E1000_IMS_RXQ1 E1000_ICR_RXQ1 /* Rx Queue 1 Interrupt */
+--- a/drivers/net/ethernet/intel/e1000e/netdev.c
++++ b/drivers/net/ethernet/intel/e1000e/netdev.c
+@@ -1910,16 +1910,12 @@ static irqreturn_t e1000_msix_other(int
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+- u32 icr;
+-
+- icr = er32(ICR);
+- ew32(ICR, E1000_ICR_OTHER);
++ u32 icr = er32(ICR);
+
+ if (icr & adapter->eiac_mask)
+ ew32(ICS, (icr & adapter->eiac_mask));
+
+ if (icr & E1000_ICR_LSC) {
+- ew32(ICR, E1000_ICR_LSC);
+ hw->mac.get_link_status = true;
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+@@ -1927,7 +1923,7 @@ static irqreturn_t e1000_msix_other(int
+ }
+
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+- ew32(IMS, E1000_IMS_OTHER);
++ ew32(IMS, E1000_IMS_OTHER | IMS_OTHER_MASK);
+
+ return IRQ_HANDLED;
+ }
+@@ -2254,7 +2250,8 @@ static void e1000_irq_enable(struct e100
+
+ if (adapter->msix_entries) {
+ ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
+- ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
++ ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER |
++ IMS_OTHER_MASK);
+ } else if (hw->mac.type >= e1000_pch_lpt) {
+ ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER);
+ } else {
+++ /dev/null
-From patchwork Mon Mar 5 21:40:25 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [net,v2,1/6] e1000e: Remove Other from EIAC
-X-Patchwork-Submitter: "Kirsher, Jeffrey T" <jeffrey.t.kirsher@intel.com>
-X-Patchwork-Id: 881773
-X-Patchwork-Delegate: davem@davemloft.net
-Message-Id: <20180305214030.25141-2-jeffrey.t.kirsher@intel.com>
-To: davem@davemloft.net
-Cc: Benjamin Poirier <bpoirier@suse.com>, netdev@vger.kernel.org,
- nhorman@redhat.com, sassmann@redhat.com, jogreene@redhat.com,
- Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-Date: Mon, 5 Mar 2018 13:40:25 -0800
-From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-List-Id: <netdev.vger.kernel.org>
-
-From: Benjamin Poirier <bpoirier@suse.com>
-
-It was reported that emulated e1000e devices in vmware esxi 6.5 Build
-7526125 do not link up after commit 4aea7a5c5e94 ("e1000e: Avoid receiver
-overrun interrupt bursts", v4.15-rc1). Some tracing shows that after
-e1000e_trigger_lsc() is called, ICR reads out as 0x0 in e1000_msix_other()
-on emulated e1000e devices. In comparison, on real e1000e 82574 hardware,
-icr=0x80000004 (_INT_ASSERTED | _LSC) in the same situation.
-
-Some experimentation showed that this flaw in vmware e1000e emulation can
-be worked around by not setting Other in EIAC. This is how it was before
-16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1).
-
-Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts")
-Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
-Tested-by: Aaron Brown <aaron.f.brown@intel.com>
-Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
----
- drivers/net/ethernet/intel/e1000e/netdev.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/intel/e1000e/netdev.c
-+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
-@@ -1914,6 +1914,8 @@ static irqreturn_t e1000_msix_other(int
- bool enable = true;
-
- icr = er32(ICR);
-+ ew32(ICR, E1000_ICR_OTHER);
-+
- if (icr & E1000_ICR_RXO) {
- ew32(ICR, E1000_ICR_RXO);
- enable = false;
-@@ -2036,7 +2038,6 @@ static void e1000_configure_msix(struct
- hw->hw_addr + E1000_EITR_82574(vector));
- else
- writel(1, hw->hw_addr + E1000_EITR_82574(vector));
-- adapter->eiac_mask |= E1000_IMS_OTHER;
-
- /* Cause Tx interrupts on every write back */
- ivar |= BIT(31);
-@@ -2261,7 +2262,7 @@ static void e1000_irq_enable(struct e100
-
- if (adapter->msix_entries) {
- ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
-- ew32(IMS, adapter->eiac_mask | E1000_IMS_LSC);
-+ ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
- } else if (hw->mac.type >= e1000_pch_lpt) {
- ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER);
- } else {
+++ /dev/null
-From patchwork Mon Mar 5 21:40:26 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [net, v2,
- 2/6] Partial revert "e1000e: Avoid receiver overrun interrupt bursts"
-X-Patchwork-Submitter: "Kirsher, Jeffrey T" <jeffrey.t.kirsher@intel.com>
-X-Patchwork-Id: 881769
-X-Patchwork-Delegate: davem@davemloft.net
-Message-Id: <20180305214030.25141-3-jeffrey.t.kirsher@intel.com>
-To: davem@davemloft.net
-Cc: Benjamin Poirier <bpoirier@suse.com>, netdev@vger.kernel.org,
- nhorman@redhat.com, sassmann@redhat.com, jogreene@redhat.com,
- Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-Date: Mon, 5 Mar 2018 13:40:26 -0800
-From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-List-Id: <netdev.vger.kernel.org>
-
-From: Benjamin Poirier <bpoirier@suse.com>
-
-This partially reverts commit 4aea7a5c5e940c1723add439f4088844cd26196d.
-
-We keep the fix for the first part of the problem (1) described in the log
-of that commit, that is to read ICR in the other interrupt handler. We
-remove the fix for the second part of the problem (2), Other interrupt
-throttling.
-
-Bursts of "Other" interrupts may once again occur during rxo (receive
-overflow) traffic conditions. This is deemed acceptable in the interest of
-avoiding unforeseen fallout from changes that are not strictly necessary.
-As discussed, the e1000e driver should be in "maintenance mode".
-
-Link: https://www.spinics.net/lists/netdev/msg480675.html
-Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
-Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
-Tested-by: Aaron Brown <aaron.f.brown@intel.com>
-Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
----
- drivers/net/ethernet/intel/e1000e/netdev.c | 16 ++--------------
- 1 file changed, 2 insertions(+), 14 deletions(-)
-
---- a/drivers/net/ethernet/intel/e1000e/netdev.c
-+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
-@@ -1911,21 +1911,10 @@ static irqreturn_t e1000_msix_other(int
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 icr;
-- bool enable = true;
-
- icr = er32(ICR);
- ew32(ICR, E1000_ICR_OTHER);
-
-- if (icr & E1000_ICR_RXO) {
-- ew32(ICR, E1000_ICR_RXO);
-- enable = false;
-- /* napi poll will re-enable Other, make sure it runs */
-- if (napi_schedule_prep(&adapter->napi)) {
-- adapter->total_rx_bytes = 0;
-- adapter->total_rx_packets = 0;
-- __napi_schedule(&adapter->napi);
-- }
-- }
- if (icr & E1000_ICR_LSC) {
- ew32(ICR, E1000_ICR_LSC);
- hw->mac.get_link_status = true;
-@@ -1934,7 +1923,7 @@ static irqreturn_t e1000_msix_other(int
- mod_timer(&adapter->watchdog_timer, jiffies + 1);
- }
-
-- if (enable && !test_bit(__E1000_DOWN, &adapter->state))
-+ if (!test_bit(__E1000_DOWN, &adapter->state))
- ew32(IMS, E1000_IMS_OTHER);
-
- return IRQ_HANDLED;
-@@ -2704,8 +2693,7 @@ static int e1000e_poll(struct napi_struc
- napi_complete_done(napi, work_done);
- if (!test_bit(__E1000_DOWN, &adapter->state)) {
- if (adapter->msix_entries)
-- ew32(IMS, adapter->rx_ring->ims_val |
-- E1000_IMS_OTHER);
-+ ew32(IMS, adapter->rx_ring->ims_val);
- else
- e1000_irq_enable(adapter);
- }
+++ /dev/null
-From patchwork Mon Mar 5 21:40:27 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [net, v2,
- 3/6] e1000e: Fix queue interrupt re-raising in Other interrupt
-X-Patchwork-Submitter: "Kirsher, Jeffrey T" <jeffrey.t.kirsher@intel.com>
-X-Patchwork-Id: 881775
-X-Patchwork-Delegate: davem@davemloft.net
-Message-Id: <20180305214030.25141-4-jeffrey.t.kirsher@intel.com>
-To: davem@davemloft.net
-Cc: Benjamin Poirier <bpoirier@suse.com>, netdev@vger.kernel.org,
- nhorman@redhat.com, sassmann@redhat.com, jogreene@redhat.com,
- Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-Date: Mon, 5 Mar 2018 13:40:27 -0800
-From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-List-Id: <netdev.vger.kernel.org>
-
-From: Benjamin Poirier <bpoirier@suse.com>
-
-Restores the ICS write for Rx/Tx queue interrupts which was present before
-commit 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1)
-but was not restored in commit 4aea7a5c5e94
-("e1000e: Avoid receiver overrun interrupt bursts", v4.15-rc1).
-
-This re-raises the queue interrupts in case the txq or rxq bits were set in
-ICR and the Other interrupt handler read and cleared ICR before the queue
-interrupt was raised.
-
-Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts")
-Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
-Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
-Tested-by: Aaron Brown <aaron.f.brown@intel.com>
-Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
----
- drivers/net/ethernet/intel/e1000e/netdev.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/net/ethernet/intel/e1000e/netdev.c
-+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
-@@ -1915,6 +1915,9 @@ static irqreturn_t e1000_msix_other(int
- icr = er32(ICR);
- ew32(ICR, E1000_ICR_OTHER);
-
-+ if (icr & adapter->eiac_mask)
-+ ew32(ICS, (icr & adapter->eiac_mask));
-+
- if (icr & E1000_ICR_LSC) {
- ew32(ICR, E1000_ICR_LSC);
- hw->mac.get_link_status = true;
+++ /dev/null
-From patchwork Mon Mar 5 21:40:28 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [net,v2,4/6] e1000e: Avoid missed interrupts following ICR read
-X-Patchwork-Submitter: "Kirsher, Jeffrey T" <jeffrey.t.kirsher@intel.com>
-X-Patchwork-Id: 881771
-X-Patchwork-Delegate: davem@davemloft.net
-Message-Id: <20180305214030.25141-5-jeffrey.t.kirsher@intel.com>
-To: davem@davemloft.net
-Cc: Benjamin Poirier <bpoirier@suse.com>, netdev@vger.kernel.org,
- nhorman@redhat.com, sassmann@redhat.com, jogreene@redhat.com,
- Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-Date: Mon, 5 Mar 2018 13:40:28 -0800
-From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-List-Id: <netdev.vger.kernel.org>
-
-From: Benjamin Poirier <bpoirier@suse.com>
-
-The 82574 specification update errata 12 states that interrupts may be
-missed if ICR is read while INT_ASSERTED is not set. Avoid that problem by
-setting all bits related to events that can trigger the Other interrupt in
-IMS.
-
-The Other interrupt is raised for such events regardless of whether or not
-they are set in IMS. However, only when they are set is the INT_ASSERTED
-bit also set in ICR.
-
-By doing this, we ensure that INT_ASSERTED is always set when we read ICR
-in e1000_msix_other() and steer clear of the errata. This also ensures that
-ICR will automatically be cleared on read, therefore we no longer need to
-clear bits explicitly.
-
-Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
-Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
-Tested-by: Aaron Brown <aaron.f.brown@intel.com>
-Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
----
- drivers/net/ethernet/intel/e1000e/defines.h | 21 ++++++++++++++++++++-
- drivers/net/ethernet/intel/e1000e/netdev.c | 11 ++++-------
- 2 files changed, 24 insertions(+), 8 deletions(-)
-
---- a/drivers/net/ethernet/intel/e1000e/defines.h
-+++ b/drivers/net/ethernet/intel/e1000e/defines.h
-@@ -400,6 +400,10 @@
- #define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */
- #define E1000_ICR_RXO 0x00000040 /* Receiver Overrun */
- #define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */
-+#define E1000_ICR_MDAC 0x00000200 /* MDIO Access Complete */
-+#define E1000_ICR_SRPD 0x00010000 /* Small Receive Packet Detected */
-+#define E1000_ICR_ACK 0x00020000 /* Receive ACK Frame Detected */
-+#define E1000_ICR_MNG 0x00040000 /* Manageability Event Detected */
- #define E1000_ICR_ECCER 0x00400000 /* Uncorrectable ECC Error */
- /* If this bit asserted, the driver should claim the interrupt */
- #define E1000_ICR_INT_ASSERTED 0x80000000
-@@ -407,7 +411,7 @@
- #define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */
- #define E1000_ICR_TXQ0 0x00400000 /* Tx Queue 0 Interrupt */
- #define E1000_ICR_TXQ1 0x00800000 /* Tx Queue 1 Interrupt */
--#define E1000_ICR_OTHER 0x01000000 /* Other Interrupts */
-+#define E1000_ICR_OTHER 0x01000000 /* Other Interrupt */
-
- /* PBA ECC Register */
- #define E1000_PBA_ECC_COUNTER_MASK 0xFFF00000 /* ECC counter mask */
-@@ -431,12 +435,27 @@
- E1000_IMS_RXSEQ | \
- E1000_IMS_LSC)
-
-+/* These are all of the events related to the OTHER interrupt.
-+ */
-+#define IMS_OTHER_MASK ( \
-+ E1000_IMS_LSC | \
-+ E1000_IMS_RXO | \
-+ E1000_IMS_MDAC | \
-+ E1000_IMS_SRPD | \
-+ E1000_IMS_ACK | \
-+ E1000_IMS_MNG)
-+
- /* Interrupt Mask Set */
- #define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
- #define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
- #define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */
- #define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */
-+#define E1000_IMS_RXO E1000_ICR_RXO /* Receiver Overrun */
- #define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */
-+#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO Access Complete */
-+#define E1000_IMS_SRPD E1000_ICR_SRPD /* Small Receive Packet */
-+#define E1000_IMS_ACK E1000_ICR_ACK /* Receive ACK Frame Detected */
-+#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability Event */
- #define E1000_IMS_ECCER E1000_ICR_ECCER /* Uncorrectable ECC Error */
- #define E1000_IMS_RXQ0 E1000_ICR_RXQ0 /* Rx Queue 0 Interrupt */
- #define E1000_IMS_RXQ1 E1000_ICR_RXQ1 /* Rx Queue 1 Interrupt */
---- a/drivers/net/ethernet/intel/e1000e/netdev.c
-+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
-@@ -1910,16 +1910,12 @@ static irqreturn_t e1000_msix_other(int
- struct net_device *netdev = data;
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-- u32 icr;
--
-- icr = er32(ICR);
-- ew32(ICR, E1000_ICR_OTHER);
-+ u32 icr = er32(ICR);
-
- if (icr & adapter->eiac_mask)
- ew32(ICS, (icr & adapter->eiac_mask));
-
- if (icr & E1000_ICR_LSC) {
-- ew32(ICR, E1000_ICR_LSC);
- hw->mac.get_link_status = true;
- /* guard against interrupt when we're going down */
- if (!test_bit(__E1000_DOWN, &adapter->state))
-@@ -1927,7 +1923,7 @@ static irqreturn_t e1000_msix_other(int
- }
-
- if (!test_bit(__E1000_DOWN, &adapter->state))
-- ew32(IMS, E1000_IMS_OTHER);
-+ ew32(IMS, E1000_IMS_OTHER | IMS_OTHER_MASK);
-
- return IRQ_HANDLED;
- }
-@@ -2254,7 +2250,8 @@ static void e1000_irq_enable(struct e100
-
- if (adapter->msix_entries) {
- ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
-- ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
-+ ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER |
-+ IMS_OTHER_MASK);
- } else if (hw->mac.type >= e1000_pch_lpt) {
- ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER);
- } else {