mxser: convert large macros to functions

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 97b1291ec2241185dde92b5f08c5aaab504132e2..4b81a85c5b53d1002252514b9e95c3cc60c0bb43 100644 (file)
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -307,6 +307,200 @@ static unsigned char mxser_msr[MXSER_PORTS + 1];
 static struct mxser_mon_ext mon_data_ext;
 static int mxser_set_baud_method[MXSER_PORTS + 1];
 
+static void mxser_enable_must_enchance_mode(unsigned long baseio)
+{
+       u8 oldlcr;
+       u8 efr;
+
+       oldlcr = inb(baseio + UART_LCR);
+       outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+       efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+       efr |= MOXA_MUST_EFR_EFRB_ENABLE;
+
+       outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+       outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_disable_must_enchance_mode(unsigned long baseio)
+{
+       u8 oldlcr;
+       u8 efr;
+
+       oldlcr = inb(baseio + UART_LCR);
+       outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+       efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+       efr &= ~MOXA_MUST_EFR_EFRB_ENABLE;
+
+       outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+       outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_set_must_xon1_value(unsigned long baseio, u8 value)
+{
+       u8 oldlcr;
+       u8 efr;
+
+       oldlcr = inb(baseio + UART_LCR);
+       outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+       efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+       efr &= ~MOXA_MUST_EFR_BANK_MASK;
+       efr |= MOXA_MUST_EFR_BANK0;
+
+       outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+       outb(value, baseio + MOXA_MUST_XON1_REGISTER);
+       outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_set_must_xoff1_value(unsigned long baseio, u8 value)
+{
+       u8 oldlcr;
+       u8 efr;
+
+       oldlcr = inb(baseio + UART_LCR);
+       outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+       efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+       efr &= ~MOXA_MUST_EFR_BANK_MASK;
+       efr |= MOXA_MUST_EFR_BANK0;
+
+       outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+       outb(value, baseio + MOXA_MUST_XOFF1_REGISTER);
+       outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_set_must_fifo_value(struct mxser_port *info)
+{
+       u8 oldlcr;
+       u8 efr;
+
+       oldlcr = inb(info->ioaddr + UART_LCR);
+       outb(MOXA_MUST_ENTER_ENCHANCE, info->ioaddr + UART_LCR);
+
+       efr = inb(info->ioaddr + MOXA_MUST_EFR_REGISTER);
+       efr &= ~MOXA_MUST_EFR_BANK_MASK;
+       efr |= MOXA_MUST_EFR_BANK1;
+
+       outb(efr, info->ioaddr + MOXA_MUST_EFR_REGISTER);
+       outb((u8)info->rx_high_water, info->ioaddr + MOXA_MUST_RBRTH_REGISTER);
+       outb((u8)info->rx_trigger, info->ioaddr + MOXA_MUST_RBRTI_REGISTER);
+       outb((u8)info->rx_low_water, info->ioaddr + MOXA_MUST_RBRTL_REGISTER);
+       outb(oldlcr, info->ioaddr + UART_LCR);
+}
+
+static void mxser_set_must_enum_value(unsigned long baseio, u8 value)
+{
+       u8 oldlcr;
+       u8 efr;
+
+       oldlcr = inb(baseio + UART_LCR);
+       outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+       efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+       efr &= ~MOXA_MUST_EFR_BANK_MASK;
+       efr |= MOXA_MUST_EFR_BANK2;
+
+       outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+       outb(value, baseio + MOXA_MUST_ENUM_REGISTER);
+       outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_get_must_hardware_id(unsigned long baseio, u8 *pId)
+{
+       u8 oldlcr;
+       u8 efr;
+
+       oldlcr = inb(baseio + UART_LCR);
+       outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+       efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+       efr &= ~MOXA_MUST_EFR_BANK_MASK;
+       efr |= MOXA_MUST_EFR_BANK2;
+
+       outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+       *pId = inb(baseio + MOXA_MUST_HWID_REGISTER);
+       outb(oldlcr, baseio + UART_LCR);
+}
+
+static void SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(unsigned long baseio)
+{
+       u8 oldlcr;
+       u8 efr;
+
+       oldlcr = inb(baseio + UART_LCR);
+       outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+       efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+       efr &= ~MOXA_MUST_EFR_SF_MASK;
+
+       outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+       outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_enable_must_tx_software_flow_control(unsigned long baseio)
+{
+       u8 oldlcr;
+       u8 efr;
+
+       oldlcr = inb(baseio + UART_LCR);
+       outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+       efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+       efr &= ~MOXA_MUST_EFR_SF_TX_MASK;
+       efr |= MOXA_MUST_EFR_SF_TX1;
+
+       outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+       outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_disable_must_tx_software_flow_control(unsigned long baseio)
+{
+       u8 oldlcr;
+       u8 efr;
+
+       oldlcr = inb(baseio + UART_LCR);
+       outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+       efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+       efr &= ~MOXA_MUST_EFR_SF_TX_MASK;
+
+       outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+       outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_enable_must_rx_software_flow_control(unsigned long baseio)
+{
+       u8 oldlcr;
+       u8 efr;
+
+       oldlcr = inb(baseio + UART_LCR);
+       outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+       efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+       efr &= ~MOXA_MUST_EFR_SF_RX_MASK;
+       efr |= MOXA_MUST_EFR_SF_RX1;
+
+       outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+       outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_disable_must_rx_software_flow_control(unsigned long baseio)
+{
+       u8 oldlcr;
+       u8 efr;
+
+       oldlcr = inb(baseio + UART_LCR);
+       outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+       efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+       efr &= ~MOXA_MUST_EFR_SF_RX_MASK;
+
+       outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+       outb(oldlcr, baseio + UART_LCR);
+}
+
 #ifdef CONFIG_PCI
 static int __devinit CheckIsMoxaMust(unsigned long io)
 {
@@ -314,16 +508,16 @@ static int __devinit CheckIsMoxaMust(unsigned long io)
        int i;
 
        outb(0, io + UART_LCR);
-       DISABLE_MOXA_MUST_ENCHANCE_MODE(io);
+       mxser_disable_must_enchance_mode(io);
        oldmcr = inb(io + UART_MCR);
        outb(0, io + UART_MCR);
-       SET_MOXA_MUST_XON1_VALUE(io, 0x11);
+       mxser_set_must_xon1_value(io, 0x11);
        if ((hwid = inb(io + UART_MCR)) != 0) {
                outb(oldmcr, io + UART_MCR);
                return MOXA_OTHER_UART;
        }
 
-       GET_MOXA_MUST_HARDWARE_ID(io, &hwid);
+       mxser_get_must_hardware_id(io, &hwid);
        for (i = 1; i < UART_INFO_NUM; i++) { /* 0 = OTHER_UART */
                if (hwid == Gpci_uart_info[i].type)
                        return (int)hwid;
@@ -494,10 +688,10 @@ static int mxser_set_baud(struct mxser_port *info, long newspd)
                } else
                        quot /= newspd;
 
-               SET_MOXA_MUST_ENUM_VALUE(info->ioaddr, quot);
+               mxser_set_must_enum_value(info->ioaddr, quot);
        } else
 #endif
-               SET_MOXA_MUST_ENUM_VALUE(info->ioaddr, 0);
+               mxser_set_must_enum_value(info->ioaddr, 0);
 
        return 0;
 }
@@ -553,14 +747,14 @@ static int mxser_change_speed(struct mxser_port *info,
                if (info->board->chip_flag) {
                        fcr = UART_FCR_ENABLE_FIFO;
                        fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
-                       SET_MOXA_MUST_FIFO_VALUE(info);
+                       mxser_set_must_fifo_value(info);
                } else
                        fcr = 0;
        } else {
                fcr = UART_FCR_ENABLE_FIFO;
                if (info->board->chip_flag) {
                        fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
-                       SET_MOXA_MUST_FIFO_VALUE(info);
+                       mxser_set_must_fifo_value(info);
                } else {
                        switch (info->rx_trigger) {
                        case 1:
@@ -657,17 +851,21 @@ static int mxser_change_speed(struct mxser_port *info,
                }
        }
        if (info->board->chip_flag) {
-               SET_MOXA_MUST_XON1_VALUE(info->ioaddr, START_CHAR(info->tty));
-               SET_MOXA_MUST_XOFF1_VALUE(info->ioaddr, STOP_CHAR(info->tty));
+               mxser_set_must_xon1_value(info->ioaddr, START_CHAR(info->tty));
+               mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(info->tty));
                if (I_IXON(info->tty)) {
-                       ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
+                       mxser_enable_must_rx_software_flow_control(
+                                       info->ioaddr);
                } else {
-                       DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
+                       mxser_disable_must_rx_software_flow_control(
+                                       info->ioaddr);
                }
                if (I_IXOFF(info->tty)) {
-                       ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
+                       mxser_enable_must_tx_software_flow_control(
+                                       info->ioaddr);
                } else {
-                       DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
+                       mxser_disable_must_tx_software_flow_control(
+                                       info->ioaddr);
                }
        }
 
@@ -1938,7 +2136,8 @@ static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termi
 
                if (info->board->chip_flag) {
                        spin_lock_irqsave(&info->slock, flags);
-                       DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
+                       mxser_disable_must_rx_software_flow_control(
+                                       info->ioaddr);
                        spin_unlock_irqrestore(&info->slock, flags);
                }
 
@@ -2357,7 +2556,7 @@ static int __devinit mxser_initbrd(struct mxser_board *brd,
 
                /* Enhance mode enabled here */
                if (brd->chip_flag != MOXA_OTHER_UART)
-                       ENABLE_MOXA_MUST_ENCHANCE_MODE(info->ioaddr);
+                       mxser_enable_must_enchance_mode(info->ioaddr);
 
                info->flags = ASYNC_SHARE_IRQ;
                info->type = brd->uart_type;

diff --git a/drivers/char/mxser.h b/drivers/char/mxser.h
index 844171115954701dd6055fd6d5be9906843486fb..41878a69203d72ae1d3b52830868ff561f1ca83e 100644 (file)
--- a/drivers/char/mxser.h
+++ b/drivers/char/mxser.h
@@ -147,141 +147,4 @@
 /* Rx software flow control mask */
 #define MOXA_MUST_EFR_SF_RX_MASK       0x03
 
-#define ENABLE_MOXA_MUST_ENCHANCE_MODE(baseio) do {            \
-       u8      __oldlcr, __efr;                                \
-       __oldlcr = inb((baseio)+UART_LCR);                      \
-       outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR);      \
-       __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER);           \
-       __efr |= MOXA_MUST_EFR_EFRB_ENABLE;                     \
-       outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER);           \
-       outb(__oldlcr, (baseio)+UART_LCR);                      \
-} while (0)
-
-#define DISABLE_MOXA_MUST_ENCHANCE_MODE(baseio) do {           \
-       u8      __oldlcr, __efr;                                \
-       __oldlcr = inb((baseio)+UART_LCR);                      \
-       outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR);      \
-       __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER);           \
-       __efr &= ~MOXA_MUST_EFR_EFRB_ENABLE;                    \
-       outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER);           \
-       outb(__oldlcr, (baseio)+UART_LCR);                      \
-} while (0)
-
-#define SET_MOXA_MUST_XON1_VALUE(baseio, Value) do {           \
-       u8      __oldlcr, __efr;                                \
-       __oldlcr = inb((baseio)+UART_LCR);                      \
-       outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR);      \
-       __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER);           \
-       __efr &= ~MOXA_MUST_EFR_BANK_MASK;                      \
-       __efr |= MOXA_MUST_EFR_BANK0;                           \
-       outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER);           \
-       outb((u8)(Value), (baseio)+MOXA_MUST_XON1_REGISTER);    \
-       outb(__oldlcr, (baseio)+UART_LCR);                      \
-} while (0)
-
-#define SET_MOXA_MUST_XOFF1_VALUE(baseio, Value) do {          \
-       u8      __oldlcr, __efr;                                \
-       __oldlcr = inb((baseio)+UART_LCR);                      \
-       outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR);      \
-       __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER);           \
-       __efr &= ~MOXA_MUST_EFR_BANK_MASK;                      \
-       __efr |= MOXA_MUST_EFR_BANK0;                           \
-       outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER);           \
-       outb((u8)(Value), (baseio)+MOXA_MUST_XOFF1_REGISTER);   \
-       outb(__oldlcr, (baseio)+UART_LCR);                      \
-} while (0)
-
-#define SET_MOXA_MUST_FIFO_VALUE(info) do {                    \
-       u8      __oldlcr, __efr;                                \
-       __oldlcr = inb((info)->ioaddr+UART_LCR);                \
-       outb(MOXA_MUST_ENTER_ENCHANCE, (info)->ioaddr+UART_LCR);\
-       __efr = inb((info)->ioaddr+MOXA_MUST_EFR_REGISTER);     \
-       __efr &= ~MOXA_MUST_EFR_BANK_MASK;                      \
-       __efr |= MOXA_MUST_EFR_BANK1;                           \
-       outb(__efr, (info)->ioaddr+MOXA_MUST_EFR_REGISTER);     \
-       outb((u8)((info)->rx_high_water), (info)->ioaddr+       \
-                       MOXA_MUST_RBRTH_REGISTER);              \
-       outb((u8)((info)->rx_trigger), (info)->ioaddr+          \
-                       MOXA_MUST_RBRTI_REGISTER);              \
-       outb((u8)((info)->rx_low_water), (info)->ioaddr+        \
-                       MOXA_MUST_RBRTL_REGISTER);              \
-       outb(__oldlcr, (info)->ioaddr+UART_LCR);                \
-} while (0)
-
-#define SET_MOXA_MUST_ENUM_VALUE(baseio, Value) do {           \
-       u8      __oldlcr, __efr;                                \
-       __oldlcr = inb((baseio)+UART_LCR);                      \
-       outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR);      \
-       __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER);           \
-       __efr &= ~MOXA_MUST_EFR_BANK_MASK;                      \
-       __efr |= MOXA_MUST_EFR_BANK2;                           \
-       outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER);           \
-       outb((u8)(Value), (baseio)+MOXA_MUST_ENUM_REGISTER);    \
-       outb(__oldlcr, (baseio)+UART_LCR);                      \
-} while (0)
-
-#define GET_MOXA_MUST_HARDWARE_ID(baseio, pId) do {            \
-       u8      __oldlcr, __efr;                                \
-       __oldlcr = inb((baseio)+UART_LCR);                      \
-       outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR);      \
-       __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER);           \
-       __efr &= ~MOXA_MUST_EFR_BANK_MASK;                      \
-       __efr |= MOXA_MUST_EFR_BANK2;                           \
-       outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER);           \
-       *pId = inb((baseio)+MOXA_MUST_HWID_REGISTER);           \
-       outb(__oldlcr, (baseio)+UART_LCR);                      \
-} while (0)
-
-#define SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(baseio) do {    \
-       u8      __oldlcr, __efr;                                \
-       __oldlcr = inb((baseio)+UART_LCR);                      \
-       outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR);      \
-       __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER);           \
-       __efr &= ~MOXA_MUST_EFR_SF_MASK;                        \
-       outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER);           \
-       outb(__oldlcr, (baseio)+UART_LCR);                      \
-} while (0)
-
-#define ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(baseio) do { \
-       u8      __oldlcr, __efr;                                \
-       __oldlcr = inb((baseio)+UART_LCR);                      \
-       outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR);      \
-       __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER);           \
-       __efr &= ~MOXA_MUST_EFR_SF_TX_MASK;                     \
-       __efr |= MOXA_MUST_EFR_SF_TX1;                          \
-       outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER);           \
-       outb(__oldlcr, (baseio)+UART_LCR);                      \
-} while (0)
-
-#define DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(baseio) do {        \
-       u8      __oldlcr, __efr;                                \
-       __oldlcr = inb((baseio)+UART_LCR);                      \
-       outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR);      \
-       __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER);           \
-       __efr &= ~MOXA_MUST_EFR_SF_TX_MASK;                     \
-       outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER);           \
-       outb(__oldlcr, (baseio)+UART_LCR);                      \
-} while (0)
-
-#define ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(baseio) do { \
-       u8      __oldlcr, __efr;                                \
-       __oldlcr = inb((baseio)+UART_LCR);                      \
-       outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR);      \
-       __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER);           \
-       __efr &= ~MOXA_MUST_EFR_SF_RX_MASK;                     \
-       __efr |= MOXA_MUST_EFR_SF_RX1;                          \
-       outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER);           \
-       outb(__oldlcr, (baseio)+UART_LCR);                      \
-} while (0)
-
-#define DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(baseio) do {        \
-       u8      __oldlcr, __efr;                                \
-       __oldlcr = inb((baseio)+UART_LCR);                      \
-       outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR);      \
-       __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER);           \
-       __efr &= ~MOXA_MUST_EFR_SF_RX_MASK;                     \
-       outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER);           \
-       outb(__oldlcr, (baseio)+UART_LCR);                      \
-} while (0)
-
 #endif