Warning (pci_bridge): Node /soc/pci@
40000000/pcie@0 missing ranges for PCI bridge (or not a bridge)
Warning (pci_bridge): Node /soc/pci@
40000000/pcie@0 missing bus-range for PCI bridge
Warning (pci_bridge): Node /soc/pci@
40000000/pcie@0/ath10k@0,0 node name is not "pci" or "pcie"
Warning (pci_bridge): Node /soc/pci@
40000000/pcie@0/ath10k@0,0 missing ranges for PCI bridge (or not a bridge)
Warning (pci_bridge): Node /soc/pci@
40000000/pcie@0/ath10k@0,0 incorrect #address-cells for PCI bridge
Warning (pci_bridge): Node /soc/pci@
40000000/pcie@0/ath10k@0,0 incorrect #size-cells for PCI bridge
Warning (pci_bridge): Node /soc/pci@
40000000/pcie@0/ath10k@0,0 missing bus-range for PCI bridge
Warning (unit_address_format): Failed prerequisite 'pci_bridge'
Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
Cc: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Tested-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
- device_type = "pci";
+ #size-cells = <2>;
+ ranges;
- ath10k@0,0 {
+ wifi2: wifi@0,0 {
compatible = "qcom,ath10k";
status = "okay";
- reg = <0 0 0 0 0>;
- device_type = "pci";
+ reg = <0x00010000 0 0 0 0>;
qcom,ath10k-calibration-variant = "OM-A62";
};
};