--- /dev/null
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Fri, 27 May 2016 10:54:28 +0200
+Subject: [PATCH] brcmfmac: print errors if creating interface fails
+
+This is helpful for debugging. Without this all I was getting from "iw"
+command on failed creating of P2P interface was:
+> command failed: Too many open files in system (-23)
+
+Signed-off-by: Rafal Milecki <zajec5@gmail.com>
+[arend@broadcom.com: reduce error prints upon iface creation]
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -649,20 +649,24 @@ static struct wireless_dev *brcmf_cfg802
+ return ERR_PTR(-EOPNOTSUPP);
+ case NL80211_IFTYPE_AP:
+ wdev = brcmf_ap_add_vif(wiphy, name, flags, params);
+- if (!IS_ERR(wdev))
+- brcmf_cfg80211_update_proto_addr_mode(wdev);
+- return wdev;
++ break;
+ case NL80211_IFTYPE_P2P_CLIENT:
+ case NL80211_IFTYPE_P2P_GO:
+ case NL80211_IFTYPE_P2P_DEVICE:
+ wdev = brcmf_p2p_add_vif(wiphy, name, name_assign_type, type, flags, params);
+- if (!IS_ERR(wdev))
+- brcmf_cfg80211_update_proto_addr_mode(wdev);
+- return wdev;
++ break;
+ case NL80211_IFTYPE_UNSPECIFIED:
+ default:
+ return ERR_PTR(-EINVAL);
+ }
++
++ if (IS_ERR(wdev))
++ brcmf_err("add iface %s type %d failed: err=%d\n",
++ name, type, (int)PTR_ERR(wdev));
++ else
++ brcmf_cfg80211_update_proto_addr_mode(wdev);
++
++ return wdev;
+ }
+
+ static void brcmf_scan_config_mpc(struct brcmf_if *ifp, int mpc)
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+@@ -2020,8 +2020,6 @@ static int brcmf_p2p_request_p2p_if(stru
+
+ err = brcmf_fil_iovar_data_set(ifp, "p2p_ifadd", &if_request,
+ sizeof(if_request));
+- if (err)
+- return err;
+
+ return err;
+ }
--- /dev/null
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Fri, 27 May 2016 21:07:19 +0200
+Subject: [PATCH] brcmfmac: fix setting AP channel with new firmwares
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Firmware for new chipsets is based on a new major version of code
+internally maintained at Broadcom. E.g. brcmfmac4366b-pcie.bin (used for
+BCM4366B1) is based on 10.10.69.3309 while brcmfmac43602-pcie.ap.bin was
+based on 7.35.177.56.
+
+Currently setting AP 5 GHz channel doesn't work reliably with BCM4366B1.
+When setting e.g. 36 control channel with VHT80 (center channel 42)
+firmware may randomly pick one of:
+1) 52 control channel with 58 as center one
+2) 100 control channel with 106 as center one
+3) 116 control channel with 122 as center one
+4) 149 control channel with 155 as center one
+
+It seems new firmwares require setting AP mode (BRCMF_C_SET_AP) before
+specifying a channel. Changing an order of firmware calls fixes the
+problem. This requirement resulted in two separated "chanspec" calls,
+one in AP code path and one in P2P path.
+
+This fix was verified with BCM4366B1 and tested for regressions on
+BCM43602.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -4304,7 +4304,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
+ struct brcmf_join_params join_params;
+ enum nl80211_iftype dev_role;
+ struct brcmf_fil_bss_enable_le bss_enable;
+- u16 chanspec;
++ u16 chanspec = chandef_to_chanspec(&cfg->d11inf, &settings->chandef);
+ bool mbss;
+ int is_11d;
+
+@@ -4380,16 +4380,8 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
+
+ brcmf_config_ap_mgmt_ie(ifp->vif, &settings->beacon);
+
++ /* Parameters shared by all radio interfaces */
+ if (!mbss) {
+- chanspec = chandef_to_chanspec(&cfg->d11inf,
+- &settings->chandef);
+- err = brcmf_fil_iovar_int_set(ifp, "chanspec", chanspec);
+- if (err < 0) {
+- brcmf_err("Set Channel failed: chspec=%d, %d\n",
+- chanspec, err);
+- goto exit;
+- }
+-
+ if (is_11d != ifp->vif->is_11d) {
+ err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_REGULATORY,
+ is_11d);
+@@ -4437,6 +4429,8 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
+ err = -EINVAL;
+ goto exit;
+ }
++
++ /* Interface specific setup */
+ if (dev_role == NL80211_IFTYPE_AP) {
+ if ((brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) && (!mbss))
+ brcmf_fil_iovar_int_set(ifp, "mbss", 1);
+@@ -4446,6 +4440,17 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
+ brcmf_err("setting AP mode failed %d\n", err);
+ goto exit;
+ }
++ if (!mbss) {
++ /* Firmware 10.x requires setting channel after enabling
++ * AP and before bringing interface up.
++ */
++ err = brcmf_fil_iovar_int_set(ifp, "chanspec", chanspec);
++ if (err < 0) {
++ brcmf_err("Set Channel failed: chspec=%d, %d\n",
++ chanspec, err);
++ goto exit;
++ }
++ }
+ err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 1);
+ if (err < 0) {
+ brcmf_err("BRCMF_C_UP error (%d)\n", err);
+@@ -4467,7 +4472,13 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
+ goto exit;
+ }
+ brcmf_dbg(TRACE, "AP mode configuration complete\n");
+- } else {
++ } else if (dev_role == NL80211_IFTYPE_P2P_GO) {
++ err = brcmf_fil_iovar_int_set(ifp, "chanspec", chanspec);
++ if (err < 0) {
++ brcmf_err("Set Channel failed: chspec=%d, %d\n",
++ chanspec, err);
++ goto exit;
++ }
+ err = brcmf_fil_bsscfg_data_set(ifp, "ssid", &ssid_le,
+ sizeof(ssid_le));
+ if (err < 0) {
+@@ -4484,7 +4495,10 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
+ }
+
+ brcmf_dbg(TRACE, "GO mode configuration complete\n");
++ } else {
++ WARN_ON(1);
+ }
++
+ set_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state);
+ brcmf_net_setcarrier(ifp, true);
+
--- /dev/null
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Mon, 30 May 2016 06:40:54 +0200
+Subject: [PATCH] brcmfmac: don't remove interface on link down firmware event
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+There are two firmware events we handle similarly in brcmfmac:
+BRCMF_E_LINK and BRCMF_E_IF. The difference from firmware point of view
+is that the first one means BSS remains present in the firmware. Trying
+to (re)create it (e.g. when adding new virtual interface) will result in
+an error.
+
+Current code treats both events in a similar way. It removes Linux
+interface for each of them. It works OK with e.g. BCM43602. Its firmware
+generates both events for each interface. It means we get BRCMF_E_LINK
+and remove interface. That is soon followed by BRCMF_E_IF which means
+BSS was also removed in a firmware. The only downside of this is a
+harmless error like:
+[ 208.643180] brcmfmac: brcmf_fweh_call_event_handler: no interface object
+
+Unfortunately BCM4366 firmware doesn't automatically remove BSS and so
+it doesn't generate BRCMF_E_IF. In such case we incorrectly remove Linux
+interface on BRCMF_E_LINK as BSS is still present in the firmware. It
+results in an error when trying to re-create virtual interface, e.g.:
+> iw phy phy1 interface add wlan1-1 type __ap
+[ 3602.929199] brcmfmac: brcmf_ap_add_vif: timeout occurred
+command failed: I/O error (-5)
+
+With this patch we don't remove Linux interface while firmware keeps
+BSS. Thanks to this we keep a consistent states of host driver and
+device firmware.
+
+Further improvement should be to mark BSS as disabled and remove
+interface on BRCMF_E_LINK. Then we should add support for reusing
+BSS-es.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -5269,7 +5269,6 @@ brcmf_notify_connect_status_ap(struct br
+ struct net_device *ndev,
+ const struct brcmf_event_msg *e, void *data)
+ {
+- struct brcmf_if *ifp = netdev_priv(ndev);
+ static int generation;
+ u32 event = e->event_code;
+ u32 reason = e->reason;
+@@ -5280,8 +5279,6 @@ brcmf_notify_connect_status_ap(struct br
+ ndev != cfg_to_ndev(cfg)) {
+ brcmf_dbg(CONN, "AP mode link down\n");
+ complete(&cfg->vif_disabled);
+- if (ifp->vif->mbss)
+- brcmf_remove_interface(ifp);
+ return 0;
+ }
+
projects / openwrt / svn-archive / openwrt.git / commitdiff