#if !defined(CONFIG_SPL_BUILD)
int checkboard(void)
{
+#ifdef CONFIG_TFABOOT
+ enum boot_src src = get_boot_src();
+#endif
char buf[64];
u8 sw;
static const char *const freq[] = {"100", "125", "156.25",
sw = QIXIS_READ(brdcfg[0]);
sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+#ifdef CONFIG_TFABOOT
+ if (src == BOOT_SOURCE_SD_MMC)
+ puts("SD card\n");
+#else
#ifdef CONFIG_SD_BOOT
puts("SD card\n");
#endif
+#endif /* CONFIG_TFABOOT */
switch (sw) {
#ifdef CONFIG_TARGET_LS1088AQDS
case 0:
void fsl_fdt_fixup_flash(void *fdt)
{
int offset;
+#ifdef CONFIG_TFABOOT
+ u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
+ u32 val;
+#endif
/*
* IFC-NOR and QSPI are muxed on SoC.
* disable QSPI node in dts in case QSPI is not enabled.
*/
+#ifdef CONFIG_TFABOOT
+ enum boot_src src = get_boot_src();
+ bool disable_ifc = false;
+
+ switch (src) {
+ case BOOT_SOURCE_IFC_NOR:
+ disable_ifc = false;
+ break;
+ case BOOT_SOURCE_QSPI_NOR:
+ disable_ifc = true;
+ break;
+ default:
+ val = in_le32(dcfg_ccsr + DCFG_RCWSR15 / 4);
+ if (DCFG_RCWSR15_IFCGRPABASE_QSPI == (val & (u32)0x3))
+ disable_ifc = true;
+ break;
+ }
+
+ if (disable_ifc) {
+ offset = fdt_path_offset(fdt, "/soc/ifc/nor");
+
+ if (offset < 0)
+ offset = fdt_path_offset(fdt, "/ifc/nor");
+ } else {
+ offset = fdt_path_offset(fdt, "/soc/quadspi");
+
+ if (offset < 0)
+ offset = fdt_path_offset(fdt, "/quadspi");
+ }
+
+#else
#ifdef CONFIG_FSL_QSPI
offset = fdt_path_offset(fdt, "/soc/ifc/nor");
if (offset < 0)
offset = fdt_path_offset(fdt, "/quadspi");
+#endif
#endif
if (offset < 0)
return;
}
#endif
#endif /* defined(CONFIG_SPL_BUILD) */
+
+#ifdef CONFIG_TFABOOT
+#ifdef CONFIG_MTD_NOR_FLASH
+int is_flash_available(void)
+{
+ char *env_hwconfig = env_get("hwconfig");
+ enum boot_src src = get_boot_src();
+ int is_nor_flash_available = 1;
+
+ switch (src) {
+ case BOOT_SOURCE_IFC_NOR:
+ is_nor_flash_available = 1;
+ break;
+ case BOOT_SOURCE_QSPI_NOR:
+ is_nor_flash_available = 0;
+ break;
+ /*
+ * In Case of SD boot,if qspi is defined in env_hwconfig
+ * disable nor flash probe.
+ */
+ default:
+ if (hwconfig_f("qspi", env_hwconfig))
+ is_nor_flash_available = 0;
+ break;
+ }
+ return is_nor_flash_available;
+}
+#endif
+
+void *env_sf_get_env_addr(void)
+{
+ return (void *)(CONFIG_SYS_FSL_QSPI_BASE + CONFIG_ENV_OFFSET);
+}
+#endif
#include "ls1088a_common.h"
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
+#define CONFIG_ENV_OFFSET 0x500000
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \
+ CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SECT_SIZE 0x40000
+#else
#if defined(CONFIG_QSPI_BOOT)
#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
#define CONFIG_ENV_SECT_SIZE 0x40000
#define CONFIG_ENV_SECT_SIZE 0x20000
#define CONFIG_ENV_SIZE 0x20000
#endif
+#endif /* CONFIG_TFABOOT */
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#if defined(CONFIG_TFABOOT) || \
+ defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#ifndef CONFIG_SPL_BUILD
#define CONFIG_QIXIS_I2C_ACCESS
#endif
FTIM2_GPCM_TWP(0x3E))
#define SYS_FPGA_CS_FTIM3 0x0
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#if defined(CONFIG_TFABOOT) || \
+ defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
#endif
-
#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
#define I2C_MUX_CH_VOL_MONITOR 0xA
#ifndef SPL_NO_QSPI
/* QSPI device */
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#if defined(CONFIG_TFABOOT) || \
+ defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define FSL_QSPI_FLASH_SIZE (1 << 26)
#define FSL_QSPI_FLASH_NUM 2
#endif
#ifndef SPL_NO_ENV
/* Initial environment variables */
+#ifdef CONFIG_TFABOOT
+#define QSPI_MC_INIT_CMD \
+ "sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \
+ "sf read 0x80100000 0xE00000 0x100000;" \
+ "env exists secureboot && " \
+ "sf read 0x80700000 0x700000 0x40000 && " \
+ "sf read 0x80740000 0x740000 0x40000 && " \
+ "esbc_validate 0x80700000 && " \
+ "esbc_validate 0x80740000 ;" \
+ "fsl_mc start mc 0x80000000 0x80100000\0"
+#define SD_MC_INIT_CMD \
+ "mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
+ "mmc read 0x80100000 0x7000 0x800;" \
+ "env exists secureboot && " \
+ "mmc read 0x80700000 0x3800 0x10 && " \
+ "mmc read 0x80740000 0x3A00 0x10 && " \
+ "esbc_validate 0x80700000 && " \
+ "esbc_validate 0x80740000 ;" \
+ "fsl_mc start mc 0x80000000 0x80100000\0"
+#else
#if defined(CONFIG_QSPI_BOOT)
#define MC_INIT_CMD \
"mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \
"fsl_mc start mc 0x80000000 0x80100000\0" \
"mcmemsize=0x70000000\0"
#endif
+#endif /* CONFIG_TFABOOT */
#undef CONFIG_EXTRA_ENV_SETTINGS
+#ifdef CONFIG_TFABOOT
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "BOARD=ls1088ardb\0" \
+ "hwconfig=fsl_ddr:bank_intlv=auto\0" \
+ "ramdisk_addr=0x800000\0" \
+ "ramdisk_size=0x2000000\0" \
+ "fdt_high=0xa0000000\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "fdt_addr=0x64f00000\0" \
+ "kernel_addr=0x1000000\0" \
+ "kernel_addr_sd=0x8000\0" \
+ "kernelhdr_addr_sd=0x4000\0" \
+ "kernel_start=0x580100000\0" \
+ "kernelheader_start=0x580800000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr=0x800000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "kernelheader_size=0x40000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "load_addr=0xa0000000\0" \
+ "kernel_size=0x2800000\0" \
+ "kernel_size_sd=0x14000\0" \
+ "kernelhdr_size_sd=0x10\0" \
+ QSPI_MC_INIT_CMD \
+ "mcmemsize=0x70000000\0" \
+ BOOTENV \
+ "boot_scripts=ls1088ardb_boot.scr\0" \
+ "boot_script_hdr=hdr_ls1088ardb_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "installer=load mmc 0:2 $load_addr " \
+ "/flex_installer_arm64.itb; " \
+ "env exists mcinitcmd && run mcinitcmd && " \
+ "mmc read 0x80001000 0x6800 0x800;" \
+ "fsl_mc lazyapply dpl 0x80001000;" \
+ "bootm $load_addr#ls1088ardb\0" \
+ "qspi_bootcmd=echo Trying load from qspi..;" \
+ "sf probe && sf read $load_addr " \
+ "$kernel_addr $kernel_size ; env exists secureboot " \
+ "&& sf read $kernelheader_addr_r $kernelheader_addr " \
+ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+ "bootm $load_addr#$BOARD\0" \
+ "sd_bootcmd=echo Trying load from sd card..;" \
+ "mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd ;" \
+ "env exists secureboot && mmc read $kernelheader_addr_r "\
+ "$kernelhdr_addr_sd $kernelhdr_size_sd " \
+ " && esbc_validate ${kernelheader_addr_r};" \
+ "bootm $load_addr#$BOARD\0"
+#else
#define CONFIG_EXTRA_ENV_SETTINGS \
"BOARD=ls1088ardb\0" \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"$kernelhdr_addr_sd $kernelhdr_size_sd " \
" && esbc_validate ${kernelheader_addr_r};" \
"bootm $load_addr#$BOARD\0"
+#endif /* CONFIG_TFABOOT */
#undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#define QSPI_NOR_BOOTCOMMAND \
+ "sf read 0x80001000 0xd00000 0x100000;" \
+ "env exists mcinitcmd && env exists secureboot " \
+ " && sf read 0x80780000 0x780000 0x100000 " \
+ "&& esbc_validate 0x80780000;env exists mcinitcmd " \
+ "&& fsl_mc lazyapply dpl 0x80001000;" \
+ "run distro_bootcmd;run qspi_bootcmd;" \
+ "env exists secureboot && esbc_halt;"
+#define SD_BOOTCOMMAND \
+ "env exists mcinitcmd && mmcinfo; " \
+ "mmc read 0x80001000 0x6800 0x800; " \
+ "env exists mcinitcmd && env exists secureboot " \
+ " && mmc read 0x80780000 0x3C00 0x10 " \
+ "&& esbc_validate 0x80780000;env exists mcinitcmd " \
+ "&& fsl_mc lazyapply dpl 0x80001000;" \
+ "run distro_bootcmd;run sd_bootcmd;" \
+ "env exists secureboot && esbc_halt;"
+#else
#if defined(CONFIG_QSPI_BOOT)
/* Try to boot an on-QSPI kernel first, then do normal distro boot */
#define CONFIG_BOOTCOMMAND \
"run distro_bootcmd;run sd_bootcmd;" \
"env exists secureboot && esbc_halt;"
#endif
+#endif /* CONFIG_TFABOOT */
/* MAC/PHY configuration */
#ifdef CONFIG_FSL_MC_ENET
projects / project / bcm63xx / u-boot.git / commitdiff