media: ov2680: dt: Add bindings for OV2680

Add device tree binding documentation for the OV2680 camera sensor.

[Sakari Ailus: Squash MAINTAINERS entry from Rui]

CC: devicetree@vger.kernel.org
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

diff --git a/Documentation/devicetree/bindings/media/i2c/ov2680.txt b/Documentation/devicetree/bindings/media/i2c/ov2680.txt
new file mode 100644 (file)
index 0000000..11e925e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov2680.txt
@@ -0,0 +1,46 @@
+* Omnivision OV2680 MIPI CSI-2 sensor
+
+Required Properties:
+- compatible: should be "ovti,ov2680".
+- clocks: reference to the xvclk input clock.
+- clock-names: should be "xvclk".
+- DOVDD-supply: Digital I/O voltage supply.
+- DVDD-supply: Digital core voltage supply.
+- AVDD-supply: Analog voltage supply.
+
+Optional Properties:
+- reset-gpios: reference to the GPIO connected to the powerdown/reset pin,
+               if any. This is an active low signal to the OV2680.
+
+The device node must contain one 'port' child node for its digital output
+video port, and this port must have a single endpoint in accordance with
+ the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Endpoint node required properties for CSI-2 connection are:
+- remote-endpoint: a phandle to the bus receiver's endpoint node.
+- clock-lanes: should be set to <0> (clock lane on hardware lane 0).
+- data-lanes: should be set to <1> (one CSI-2 lane supported).
+
+Example:
+
+&i2c2 {
+       ov2680: camera-sensor@36 {
+               compatible = "ovti,ov2680";
+               reg = <0x36>;
+               clocks = <&osc>;
+               clock-names = "xvclk";
+               reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+               DOVDD-supply = <&sw2_reg>;
+               DVDD-supply = <&sw2_reg>;
+               AVDD-supply = <&reg_peri_3p15v>;
+
+               port {
+                       ov2680_to_mipi: endpoint {
+                               remote-endpoint = <&mipi_from_sensor>;
+                               clock-lanes = <0>;
+                               data-lanes = <1>;
+                       };
+               };
+       };
+};

diff --git a/MAINTAINERS b/MAINTAINERS
index a13344d6149a801dd21cf184375ec4499ba22570..ab739894d2572296dfdc1d1d4894449daf0cd2c3 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10490,6 +10490,14 @@ T:     git git://linuxtv.org/media_tree.git
 S:     Maintained
 F:     drivers/media/i2c/ov13858.c
 
+OMNIVISION OV2680 SENSOR DRIVER
+M:     Rui Miguel Silva <rmfrfs@gmail.com>
+L:     linux-media@vger.kernel.org
+T:     git git://linuxtv.org/media_tree.git
+S:     Maintained
+F:     drivers/media/i2c/ov2680.c
+F:     Documentation/devicetree/bindings/media/i2c/ov2680.txt
+
 OMNIVISION OV2685 SENSOR DRIVER
 M:     Shunqian Zheng <zhengsq@rock-chips.com>
 L:     linux-media@vger.kernel.org