+++ /dev/null
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_ADVANCED_OPTIONS is not set
-CONFIG_AR8216_PHY=y
-CONFIG_AR8216_PHY_LEDS=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_MMAP_RND_BITS=11
-CONFIG_ARCH_MMAP_RND_BITS_MAX=17
-CONFIG_ARCH_MMAP_RND_BITS_MIN=11
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
-CONFIG_ASN1=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOOKE=y
-CONFIG_BOOKE_WDT=y
-# CONFIG_BSC9131_RDB is not set
-# CONFIG_BSC9132_QDS is not set
-# CONFIG_C293_PCIE is not set
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CLZ_TAB=y
-CONFIG_CMDLINE="console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMPAT_32BIT_TIME=y
-# CONFIG_CORENET_GENERIC is not set
-# CONFIG_CPM2 is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-# CONFIG_CRYPTO_AES_PPC_SPE is not set
-CONFIG_CRYPTO_AKCIPHER=y
-CONFIG_CRYPTO_AKCIPHER2=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_MD5_PPC is not set
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RSA=y
-# CONFIG_CRYPTO_SHA1_PPC is not set
-# CONFIG_CRYPTO_SHA1_PPC_SPE is not set
-# CONFIG_CRYPTO_SHA256_PPC_SPE is not set
-CONFIG_DATA_SHIFT=12
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_E5500_CPU is not set
-# CONFIG_E6500_CPU is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_ETEXT_SHIFT=12
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_FSL_FMAN is not set
-CONFIG_FSL_LBC=y
-CONFIG_FSL_PCI=y
-CONFIG_FSL_PQ_MDIO=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_SOC_BOOKE=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GEN_RTC=y
-# CONFIG_GE_IMP3A is not set
-CONFIG_GIANFAR=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HIVEAP_330 is not set
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_MPC=y
-CONFIG_ILLEGAL_POINTER_VALUE=0
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_ISA_DMA_API=y
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_KSI8560 is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOWMEM_CAM_NUM=3
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LXT_PHY=y
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MIGRATION=y
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC85xx_RDB is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_MSGR is not set
-CONFIG_MPIC_TIMER=y
-CONFIG_MPILIB=y
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-# CONFIG_MVME2500 is not set
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NLS=y
-CONFIG_NR_IRQS=512
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DMA_DEFAULT_COHERENT=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND=y
-# CONFIG_P1010_RDB is not set
-# CONFIG_P1022_DS is not set
-# CONFIG_P1022_RDK is not set
-# CONFIG_P1023_RDB is not set
-CONFIG_PAGE_OFFSET=0xc0000000
-# CONFIG_PANDA is not set
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEASPM=y
-# CONFIG_PCIEASPM_DEBUG is not set
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_PHYSICAL_START=0x00000000
-# CONFIG_PHYS_64BIT is not set
-# CONFIG_PPA8548 is not set
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_PPC64 is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_BARRIER_NOSPEC=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_BOOK3S_601 is not set
-# CONFIG_PPC_BOOK3S_6xx is not set
-CONFIG_PPC_DOORBELL=y
-# CONFIG_PPC_E500MC is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-CONFIG_PPC_FSL_BOOK3E=y
-CONFIG_PPC_INDIRECT_PCI=y
-# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-CONFIG_PPC_PAGE_SHIFT=12
-# CONFIG_PPC_PTDUMP is not set
-# CONFIG_PPC_QEMU_E500 is not set
-CONFIG_PPC_SMP_MUXED_IPI=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_PPC_WERROR=y
-CONFIG_QE_GPIO=y
-CONFIG_QUICC_ENGINE=y
-CONFIG_RAS=y
-# CONFIG_RED_15W_REV1 is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_GENERIC=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-# CONFIG_SBC8548 is not set
-# CONFIG_SCOM_DEBUGFS is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_QE is not set
-CONFIG_SIMPLE_GPIO=y
-# CONFIG_SOCRATES is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPE=y
-CONFIG_SPE_POSSIBLE=y
-CONFIG_SPI=y
-CONFIG_SPI_FSL_ESPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SRCU=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_STX_GP3 is not set
-CONFIG_SWCONFIG=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_THREAD_SHIFT=13
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-# CONFIG_TL_WDR4900_V1 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_TWR_P102x is not set
-CONFIG_UCC=y
-CONFIG_UCC_FAST=y
-CONFIG_UCC_GETH=y
-# CONFIG_UGETH_TX_ON_DEMAND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_VDSO32=y
-# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WS_AP3710I is not set
-# CONFIG_XES_MPC85xx is not set
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_POWERPC=y
+++ /dev/null
---- a/arch/powerpc/platforms/85xx/common.c
-+++ b/arch/powerpc/platforms/85xx/common.c
-@@ -30,6 +30,7 @@ static const struct of_device_id mpc85xx
- { .compatible = "fsl,mpc8548-guts", },
- /* Probably unnecessary? */
- { .compatible = "gpio-leds", },
-+ { .compatible = "gpio-keys", },
- /* For all PCI controllers */
- { .compatible = "fsl,mpc8540-pci", },
- { .compatible = "fsl,mpc8548-pcie", },
+++ /dev/null
-From 1d9f596e572917772b87a2a37e1680902964782f Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 20 Feb 2013 08:40:33 +0100
-Subject: [PATCH] powerpc: 85xx: add support for the TP-Link TL-WDR4900 v1
- board
-
-This patch adds support for the TP-Link TL-WDR4900 v1
-concurrent dual-band wireless router. The devices uses
-the Freescale P1014 SoC.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- arch/powerpc/boot/Makefile | 3 ++-
- arch/powerpc/boot/wrapper | 5 +++++
- arch/powerpc/platforms/85xx/Kconfig | 12 ++++++++++++
- arch/powerpc/platforms/85xx/Makefile | 1 +
- 4 files changed, 20 insertions(+), 1 deletion(-)
-
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -161,6 +161,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie
- src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
- src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
- src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
-+src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
-
- src-wlib := $(sort $(src-wlib-y))
- src-plat := $(sort $(src-plat-y))
-@@ -342,7 +343,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm
- image-$(CONFIG_TQM8560) += cuImage.tqm8560
- image-$(CONFIG_SBC8548) += cuImage.sbc8548
- image-$(CONFIG_KSI8560) += cuImage.ksi8560
--
-+image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1
- # Board ports in arch/powerpc/platform/86xx/Kconfig
- image-$(CONFIG_MVME7100) += dtbImage.mvme7100
-
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -323,6 +323,11 @@ adder875-redboot)
- platformo="$object/fixed-head.o $object/redboot-8xx.o"
- binary=y
- ;;
-+simpleboot-tl-wdr4900-v1)
-+ platformo="$object/fixed-head.o $object/simpleboot.o"
-+ link_address='0x1000000'
-+ binary=y
-+ ;;
- simpleboot-virtex405-*)
- platformo="$object/virtex405-head.o $object/simpleboot.o $object/virtex.o"
- binary=y
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -170,6 +170,18 @@ config STX_GP3
- select CPM2
- select DEFAULT_UIMAGE
-
-+config TL_WDR4900_V1
-+ bool "TP-Link TL-WDR4900 v1"
-+ select DEFAULT_UIMAGE
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GPIO_MPC8XXX
-+ select SWIOTLB
-+ help
-+ This option enables support for the TP-Link TL-WDR4900 v1 board.
-+
-+ This board is a Concurrent Dual-Band wireless router with a
-+ Freescale P1014 SoC.
-+
- config TQM8540
- bool "TQ Components TQM8540"
- help
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -26,6 +26,7 @@ obj-$(CONFIG_CORENET_GENERIC) += coren
- obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
- obj-$(CONFIG_STX_GP3) += stx_gp3.o
- obj-$(CONFIG_TQM85xx) += tqm85xx.o
-+obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
- obj-$(CONFIG_SBC8548) += sbc8548.o
- obj-$(CONFIG_PPA8548) += ppa8548.o
- obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
+++ /dev/null
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -49,6 +49,17 @@ config BSC9132_QDS
- and dual StarCore SC3850 DSP cores.
- Manufacturer : Freescale Semiconductor, Inc
-
-+config HIVEAP_330
-+ bool "Aerohive HiveAP-330"
-+ select DEFAULT_UIMAGE
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GPIO_MPC8XXX
-+ help
-+ This option enables support for the Aerohive HiveAP-330 board.
-+
-+ This board is a Concurrent Dual-Band wireless access point with a
-+ Freescale P1020 SoC.
-+
- config MPC8540_ADS
- bool "Freescale MPC8540 ADS"
- select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -10,6 +10,7 @@ obj-y += common.o
- obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
- obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
- obj-$(CONFIG_C293_PCIE) += c293pcie.o
-+obj-$(CONFIG_HIVEAP_330) += hiveap-330.o
- obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
- obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
- obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
+++ /dev/null
---- a/arch/powerpc/Kconfig
-+++ b/arch/powerpc/Kconfig
-@@ -885,6 +885,14 @@ config CMDLINE_FORCE
- This is useful if you cannot or don't want to change the
- command-line options your boot loader passes to the kernel.
-
-+config CMDLINE_OVERRIDE
-+ bool "Use alternative cmdline from device tree"
-+ help
-+ Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can
-+ be used, this is not a good option for kernels that are shared across
-+ devices. This setting enables using "chosen/cmdline-override" as the
-+ cmdline if it exists in the device tree.
-+
- config EXTRA_TARGETS
- string "Additional default image types"
- help
---- a/drivers/of/fdt.c
-+++ b/drivers/of/fdt.c
-@@ -1060,6 +1060,17 @@ int __init early_init_dt_scan_chosen(uns
- if (p != NULL && l > 0)
- strlcpy(data, p, min(l, COMMAND_LINE_SIZE));
-
-+ /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different
-+ * device tree option of chosen/bootargs-override. This is
-+ * helpful on boards where u-boot sets bootargs, and is unable
-+ * to be modified.
-+ */
-+#ifdef CONFIG_CMDLINE_OVERRIDE
-+ p = of_get_flat_dt_prop(node, "bootargs-override", &l);
-+ if (p != NULL && l > 0)
-+ strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
-+#endif
-+
- /*
- * CONFIG_CMDLINE is meant to be a default in case nothing else
- * managed to set the command line, unless CONFIG_CMDLINE_FORCE
+++ /dev/null
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -173,6 +173,16 @@ config XES_MPC85xx
- Manufacturer: Extreme Engineering Solutions, Inc.
- URL: <http://www.xes-inc.com/>
-
-+config RED_15W_REV1
-+ bool "Sophos RED 15w Rev.1"
-+ select DEFAULT_UIMAGE
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GPIO_MPC8XXX
-+ help
-+ This option enables support for the Sophos RED 15w Rev.1 board.
-+
-+ This board is a wireless VPN router with a Freescale P1010 SoC.
-+
- config STX_GP3
- bool "Silicon Turnkey Express GP3"
- help
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -25,6 +25,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
- obj-$(CONFIG_TWR_P102x) += twr_p102x.o
- obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
-+obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o
- obj-$(CONFIG_STX_GP3) += stx_gp3.o
- obj-$(CONFIG_TQM85xx) += tqm85xx.o
- obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
+++ /dev/null
-From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Sun, 30 Dec 2018 23:24:41 +0100
-Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for OpenWRT
-
-This patch apply chages for OpenWRT in P2020RDB
-dts file.
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++---------
- 1 file changed, 63 insertions(+), 35 deletions(-)
-
---- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts
-+++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
-@@ -5,10 +5,15 @@
- * Copyright 2009-2012 Freescale Semiconductor Inc.
- */
-
-+/dts-v1/;
-+
- /include/ "p2020si-pre.dtsi"
-
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+
- / {
-- model = "fsl,P2020RDB";
-+ model = "Freescale P2020RDB";
- compatible = "fsl,P2020RDB";
-
- aliases {
-@@ -34,48 +39,38 @@
- 0x2 0x0 0x0 0xffb00000 0x00020000>;
-
- nor@0,0 {
-- #address-cells = <1>;
-- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x1000000>;
- bank-width = <2>;
- device-width = <1>;
-
-- partition@0 {
-- /* This location must not be altered */
-- /* 256KB for Vitesse 7385 Switch firmware */
-- reg = <0x0 0x00040000>;
-- label = "NOR (RO) Vitesse-7385 Firmware";
-- read-only;
-- };
--
-- partition@40000 {
-- /* 256KB for DTB Image */
-- reg = <0x00040000 0x00040000>;
-- label = "NOR (RO) DTB Image";
-- read-only;
-- };
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-
-- partition@80000 {
-- /* 3.5 MB for Linux Kernel Image */
-- reg = <0x00080000 0x00380000>;
-- label = "NOR (RO) Linux Kernel Image";
-- read-only;
-- };
-+ partition@0 {
-+ /* This location must not be altered */
-+ /* 256KB for Vitesse 7385 Switch firmware */
-+ reg = <0x0 0x00040000>;
-+ label = "NOR (RO) Vitesse-7385 Firmware";
-+ read-only;
-+ };
-
-- partition@400000 {
-- /* 11MB for JFFS2 based Root file System */
-- reg = <0x00400000 0x00b00000>;
-- label = "NOR (RW) JFFS2 Root File System";
-- };
-+ partition@40000 {
-+ compatible = "denx,fit";
-+ reg = <0x00040000 0x00ec0000>;
-+ label = "firmware";
-+ };
-
-- partition@f00000 {
-- /* This location must not be altered */
-- /* 512KB for u-boot Bootloader Image */
-- /* 512KB for u-boot Environment Variables */
-- reg = <0x00f00000 0x00100000>;
-- label = "NOR (RO) U-Boot Image";
-- read-only;
-+ partition@f00000 {
-+ /* This location must not be altered */
-+ /* 512KB for u-boot Bootloader Image */
-+ /* 512KB for u-boot Environment Variables */
-+ reg = <0x00f00000 0x00100000>;
-+ label = "u-boot";
-+ read-only;
-+ };
- };
- };
-
-@@ -140,13 +135,43 @@
- soc: soc@ffe00000 {
- ranges = <0x0 0x0 0xffe00000 0x100000>;
-
-+ gpio0: gpio-controller@fc00 {
-+ };
-+
- i2c@3000 {
-+ temperature-sensor@4c {
-+ compatible = "adi,adt7461";
-+ reg = <0x4c>;
-+ };
-+
-+ eeprom@50 {
-+ compatible = "atmel,24c256";
-+ reg = <0x50>;
-+ };
-+
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
- };
- };
-
-+ i2c@3100 {
-+ pmic@11 {
-+ compatible = "zl2006";
-+ reg = <0x11>;
-+ };
-+
-+ gpio@18 {
-+ compatible = "nxp,pca9557";
-+ reg = <0x18>;
-+ };
-+
-+ eeprom@52 {
-+ compatible = "atmel,24c01";
-+ reg = <0x52>;
-+ };
-+ };
-+
- spi@7000 {
- flash@0 {
- #address-cells = <1>;
-@@ -200,10 +225,12 @@
- phy0: ethernet-phy@0 {
- interrupts = <3 1 0 0>;
- reg = <0x0>;
-+ reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- phy1: ethernet-phy@1 {
- interrupts = <3 1 0 0>;
- reg = <0x1>;
-+ reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
- };
- tbi-phy@2 {
- device_type = "tbi-phy";
+++ /dev/null
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -60,6 +60,17 @@ config HIVEAP_330
- This board is a Concurrent Dual-Band wireless access point with a
- Freescale P1020 SoC.
-
-+config PANDA
-+ bool "OCEDO PANDA"
-+ select DEFAULT_UIMAGE
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GPIO_MPC8XXX
-+ help
-+ This option enables support for the OCEDO PANDA board.
-+
-+ This board is a Concurrent Dual-Band wireless access point with a
-+ Freescale P1020 SoC.
-+
- config MPC8540_ADS
- bool "Freescale MPC8540 ADS"
- select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -22,6 +22,7 @@ obj-$(CONFIG_P1010_RDB) += p1010rdb.o
- obj-$(CONFIG_P1022_DS) += p1022_ds.o
- obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
- obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
-+obj-$(CONFIG_PANDA) += panda.o
- obj-$(CONFIG_TWR_P102x) += twr_p102x.o
- obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
+++ /dev/null
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -71,6 +71,17 @@ config PANDA
- This board is a Concurrent Dual-Band wireless access point with a
- Freescale P1020 SoC.
-
-+config WS_AP3710I
-+ bool "Enterasys WS-AP3710i"
-+ select DEFAULT_UIMAGE
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GPIO_MPC8XXX
-+ help
-+ This option enables support for the Enterasys WS-AP3710i board.
-+
-+ This board is a Concurrent Dual-Band wireless access point with a
-+ Freescale P1020 SoC.
-+
- config MPC8540_ADS
- bool "Freescale MPC8540 ADS"
- select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
- obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
- obj-$(CONFIG_PANDA) += panda.o
- obj-$(CONFIG_TWR_P102x) += twr_p102x.o
-+obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o
- obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
- obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o
+++ /dev/null
-From d43ab14605510d9d2bd257a8cd70f24ada4621b0 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sat, 29 Feb 2020 14:27:04 +0100
-Subject: [PATCH] powerpc: bootwrapper: disable uImage generation
-
-Due to CONFIG_KERNEL_XZ symbol, the bootwrapper code tries to
-instruct the mkimage to use the xz compression, which isn't
-supported. This disables the uImage generation, as OpenWrt
-generates individual uImages for each board using it's own
-toolchain.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- arch/powerpc/boot/Makefile | 9 ---------
- 1 file changed, 9 deletions(-)
-
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -268,7 +268,6 @@ image-$(CONFIG_PPC_CHRP) += zImage.chrp
- image-$(CONFIG_PPC_EFIKA) += zImage.chrp
- image-$(CONFIG_PPC_PMAC) += zImage.pmac
- image-$(CONFIG_PPC_HOLLY) += dtbImage.holly
--image-$(CONFIG_DEFAULT_UIMAGE) += uImage
- image-$(CONFIG_EPAPR_BOOT) += zImage.epapr
-
- #
-@@ -397,15 +396,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits
- $(obj)/vmlinux.strip: vmlinux
- $(STRIP) -s -R .comment $< -o $@
-
--$(obj)/uImage: vmlinux $(wrapperbits) FORCE
-- $(call if_changed,wrap,uboot)
--
--$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
-- $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
--
--$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
-- $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb)
--
- $(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
- $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
-
projects / openwrt / staging / wigyori.git / commitdiff