+++ /dev/null
-CONFIG_AG71XX=y
-CONFIG_AG71XX_AR8216_SUPPORT=y
-# CONFIG_AG71XX_DEBUG is not set
-# CONFIG_AG71XX_DEBUG_FS is not set
-CONFIG_AR8216_PHY=y
-CONFIG_AR8216_PHY_LEDS=y
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_AT803X_PHY=y
-CONFIG_ATH79=y
-# CONFIG_ATH79_DEV_AP9X_PCI is not set
-# CONFIG_ATH79_DEV_DSA is not set
-# CONFIG_ATH79_DEV_ETH is not set
-# CONFIG_ATH79_DEV_GPIO_BUTTONS is not set
-# CONFIG_ATH79_DEV_LEDS_GPIO is not set
-# CONFIG_ATH79_DEV_M25P80 is not set
-# CONFIG_ATH79_DEV_SPI is not set
-# CONFIG_ATH79_DEV_USB is not set
-# CONFIG_ATH79_MACH_A60 is not set
-# CONFIG_ATH79_MACH_ALFA_AP120C is not set
-# CONFIG_ATH79_MACH_ALFA_AP96 is not set
-# CONFIG_ATH79_MACH_ALFA_NX is not set
-# CONFIG_ATH79_MACH_ALL0258N is not set
-# CONFIG_ATH79_MACH_ALL0315N is not set
-# CONFIG_ATH79_MACH_ANTMINER_S1 is not set
-# CONFIG_ATH79_MACH_ANTMINER_S3 is not set
-# CONFIG_ATH79_MACH_ANTROUTER_R1 is not set
-# CONFIG_ATH79_MACH_AP121 is not set
-# CONFIG_ATH79_MACH_AP121F is not set
-# CONFIG_ATH79_MACH_AP132 is not set
-# CONFIG_ATH79_MACH_AP136 is not set
-# CONFIG_ATH79_MACH_AP143 is not set
-# CONFIG_ATH79_MACH_AP147 is not set
-# CONFIG_ATH79_MACH_AP152 is not set
-# CONFIG_ATH79_MACH_AP531B0 is not set
-# CONFIG_ATH79_MACH_AP81 is not set
-# CONFIG_ATH79_MACH_AP90Q is not set
-# CONFIG_ATH79_MACH_AP91_5G is not set
-# CONFIG_ATH79_MACH_AP96 is not set
-# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
-# CONFIG_ATH79_MACH_ARCHER_C58_V1 is not set
-# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
-# CONFIG_ATH79_MACH_ARCHER_C59_V2 is not set
-# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
-# CONFIG_ATH79_MACH_ARCHER_C60_V2 is not set
-# CONFIG_ATH79_MACH_ARCHER_C7 is not set
-# CONFIG_ATH79_MACH_ARDUINO_YUN is not set
-# CONFIG_ATH79_MACH_AW_NR580 is not set
-# CONFIG_ATH79_MACH_BHR_4GRV2 is not set
-# CONFIG_ATH79_MACH_BHU_BXU2000N2_A is not set
-# CONFIG_ATH79_MACH_BSB is not set
-# CONFIG_ATH79_MACH_C55 is not set
-# CONFIG_ATH79_MACH_C60 is not set
-# CONFIG_ATH79_MACH_CAP324 is not set
-# CONFIG_ATH79_MACH_CAP4200AG is not set
-# CONFIG_ATH79_MACH_CARAMBOLA2 is not set
-# CONFIG_ATH79_MACH_CF_E316N_V2 is not set
-# CONFIG_ATH79_MACH_CF_E320N_V2 is not set
-# CONFIG_ATH79_MACH_CF_E355AC is not set
-# CONFIG_ATH79_MACH_CF_E375AC is not set
-# CONFIG_ATH79_MACH_CF_E380AC_V1 is not set
-# CONFIG_ATH79_MACH_CF_E380AC_V2 is not set
-# CONFIG_ATH79_MACH_CF_E520N is not set
-# CONFIG_ATH79_MACH_CF_E530N is not set
-# CONFIG_ATH79_MACH_CPE505N is not set
-# CONFIG_ATH79_MACH_CPE510 is not set
-# CONFIG_ATH79_MACH_CPE830 is not set
-# CONFIG_ATH79_MACH_CPE870 is not set
-# CONFIG_ATH79_MACH_CR3000 is not set
-# CONFIG_ATH79_MACH_CR5000 is not set
-# CONFIG_ATH79_MACH_DAP_1330_A1 is not set
-# CONFIG_ATH79_MACH_DAP_2695_A1 is not set
-# CONFIG_ATH79_MACH_DB120 is not set
-# CONFIG_ATH79_MACH_DGL_5500_A1 is not set
-# CONFIG_ATH79_MACH_DHP_1565_A1 is not set
-# CONFIG_ATH79_MACH_DIR_505_A1 is not set
-# CONFIG_ATH79_MACH_DIR_600_A1 is not set
-# CONFIG_ATH79_MACH_DIR_615_C1 is not set
-# CONFIG_ATH79_MACH_DIR_615_I1 is not set
-# CONFIG_ATH79_MACH_DIR_825_B1 is not set
-# CONFIG_ATH79_MACH_DIR_825_C1 is not set
-# CONFIG_ATH79_MACH_DIR_869_A1 is not set
-# CONFIG_ATH79_MACH_DLAN_HOTSPOT is not set
-# CONFIG_ATH79_MACH_DLAN_PRO_1200_AC is not set
-# CONFIG_ATH79_MACH_DLAN_PRO_500_WP is not set
-# CONFIG_ATH79_MACH_DOMYWIFI_DW33D is not set
-# CONFIG_ATH79_MACH_DR342 is not set
-# CONFIG_ATH79_MACH_DR344 is not set
-# CONFIG_ATH79_MACH_DR531 is not set
-# CONFIG_ATH79_MACH_DRAGINO2 is not set
-# CONFIG_ATH79_MACH_E1700AC_V2 is not set
-# CONFIG_ATH79_MACH_E2100L is not set
-# CONFIG_ATH79_MACH_E558_V2 is not set
-# CONFIG_ATH79_MACH_E600G_V2 is not set
-# CONFIG_ATH79_MACH_E750A_V4 is not set
-# CONFIG_ATH79_MACH_E750G_V8 is not set
-# CONFIG_ATH79_MACH_EAP120 is not set
-# CONFIG_ATH79_MACH_EAP300V2 is not set
-# CONFIG_ATH79_MACH_EAP7660D is not set
-# CONFIG_ATH79_MACH_EL_M150 is not set
-# CONFIG_ATH79_MACH_EL_MINI is not set
-# CONFIG_ATH79_MACH_ENS202EXT is not set
-# CONFIG_ATH79_MACH_EPG5000 is not set
-# CONFIG_ATH79_MACH_ESR1750 is not set
-# CONFIG_ATH79_MACH_ESR900 is not set
-# CONFIG_ATH79_MACH_EW_BALIN is not set
-# CONFIG_ATH79_MACH_EW_DORIN is not set
-# CONFIG_ATH79_MACH_F9K1115V2 is not set
-# CONFIG_ATH79_MACH_FRITZ300E is not set
-# CONFIG_ATH79_MACH_FRITZ4020 is not set
-# CONFIG_ATH79_MACH_FRITZ450E is not set
-# CONFIG_ATH79_MACH_GL_AR150 is not set
-# CONFIG_ATH79_MACH_GL_AR300 is not set
-# CONFIG_ATH79_MACH_GL_AR300M is not set
-# CONFIG_ATH79_MACH_GL_AR750 is not set
-# CONFIG_ATH79_MACH_GL_AR750S is not set
-# CONFIG_ATH79_MACH_GL_DOMINO is not set
-# CONFIG_ATH79_MACH_GL_INET is not set
-# CONFIG_ATH79_MACH_GL_MIFI is not set
-# CONFIG_ATH79_MACH_GL_USB150 is not set
-# CONFIG_ATH79_MACH_GS_OOLITE_V1 is not set
-# CONFIG_ATH79_MACH_GS_OOLITE_V5_2 is not set
-# CONFIG_ATH79_MACH_HIVEAP_121 is not set
-# CONFIG_ATH79_MACH_HIWIFI_HC6361 is not set
-# CONFIG_ATH79_MACH_HORNET_UB is not set
-# CONFIG_ATH79_MACH_JA76PF is not set
-# CONFIG_ATH79_MACH_JWAP003 is not set
-# CONFIG_ATH79_MACH_JWAP230 is not set
-# CONFIG_ATH79_MACH_KOALA is not set
-# CONFIG_ATH79_MACH_LAN_TURTLE is not set
-# CONFIG_ATH79_MACH_LIMA is not set
-# CONFIG_ATH79_MACH_MC_MAC1200R is not set
-# CONFIG_ATH79_MACH_MR12 is not set
-# CONFIG_ATH79_MACH_MR16 is not set
-# CONFIG_ATH79_MACH_MR1750 is not set
-# CONFIG_ATH79_MACH_MR18 is not set
-# CONFIG_ATH79_MACH_MR600 is not set
-# CONFIG_ATH79_MACH_MR900 is not set
-# CONFIG_ATH79_MACH_MYNET_N600 is not set
-# CONFIG_ATH79_MACH_MYNET_N750 is not set
-# CONFIG_ATH79_MACH_MYNET_REXT is not set
-# CONFIG_ATH79_MACH_MZK_W04NU is not set
-# CONFIG_ATH79_MACH_MZK_W300NH is not set
-# CONFIG_ATH79_MACH_N5Q is not set
-# CONFIG_ATH79_MACH_NBG460N is not set
-# CONFIG_ATH79_MACH_NBG6716 is not set
-# CONFIG_ATH79_MACH_OM2P is not set
-# CONFIG_ATH79_MACH_OM5P is not set
-# CONFIG_ATH79_MACH_OM5P_AC is not set
-# CONFIG_ATH79_MACH_OM5P_ACv2 is not set
-# CONFIG_ATH79_MACH_OMY_G1 is not set
-# CONFIG_ATH79_MACH_OMY_X1 is not set
-# CONFIG_ATH79_MACH_ONION_OMEGA is not set
-# CONFIG_ATH79_MACH_PB42 is not set
-# CONFIG_ATH79_MACH_PB44 is not set
-# CONFIG_ATH79_MACH_PQI_AIR_PEN is not set
-# CONFIG_ATH79_MACH_QIHOO_C301 is not set
-# CONFIG_ATH79_MACH_R36A is not set
-# CONFIG_ATH79_MACH_R602N is not set
-# CONFIG_ATH79_MACH_R6100 is not set
-# CONFIG_ATH79_MACH_RAMBUTAN is not set
-# CONFIG_ATH79_MACH_RB2011 is not set
-# CONFIG_ATH79_MACH_RB4XX is not set
-# CONFIG_ATH79_MACH_RB750 is not set
-# CONFIG_ATH79_MACH_RB91X is not set
-# CONFIG_ATH79_MACH_RB922 is not set
-# CONFIG_ATH79_MACH_RB95X is not set
-# CONFIG_ATH79_MACH_RBSPI is not set
-# CONFIG_ATH79_MACH_RBSXTLITE is not set
-# CONFIG_ATH79_MACH_RE355 is not set
-# CONFIG_ATH79_MACH_RE450 is not set
-# CONFIG_ATH79_MACH_RME_EG200 is not set
-# CONFIG_ATH79_MACH_RUT9XX is not set
-# CONFIG_ATH79_MACH_RW2458N is not set
-# CONFIG_ATH79_MACH_SC1750 is not set
-# CONFIG_ATH79_MACH_SC300M is not set
-# CONFIG_ATH79_MACH_SC450 is not set
-# CONFIG_ATH79_MACH_SMART_300 is not set
-# CONFIG_ATH79_MACH_SOM9331 is not set
-# CONFIG_ATH79_MACH_SR3200 is not set
-# CONFIG_ATH79_MACH_T830 is not set
-# CONFIG_ATH79_MACH_TELLSTICK_ZNET_LITE is not set
-# CONFIG_ATH79_MACH_TEW_632BRP is not set
-# CONFIG_ATH79_MACH_TEW_673GRU is not set
-# CONFIG_ATH79_MACH_TEW_712BR is not set
-# CONFIG_ATH79_MACH_TEW_732BR is not set
-# CONFIG_ATH79_MACH_TEW_823DRU is not set
-# CONFIG_ATH79_MACH_TL_MR11U is not set
-# CONFIG_ATH79_MACH_TL_MR13U is not set
-# CONFIG_ATH79_MACH_TL_MR3020 is not set
-# CONFIG_ATH79_MACH_TL_MR3X20 is not set
-# CONFIG_ATH79_MACH_TL_MR6400 is not set
-# CONFIG_ATH79_MACH_TL_WA701ND_V2 is not set
-# CONFIG_ATH79_MACH_TL_WA7210N_V2 is not set
-# CONFIG_ATH79_MACH_TL_WA801ND_V3 is not set
-# CONFIG_ATH79_MACH_TL_WA830RE_V2 is not set
-# CONFIG_ATH79_MACH_TL_WA850RE_V2 is not set
-# CONFIG_ATH79_MACH_TL_WA855RE_V1 is not set
-# CONFIG_ATH79_MACH_TL_WA901ND is not set
-# CONFIG_ATH79_MACH_TL_WA901ND_V2 is not set
-# CONFIG_ATH79_MACH_TL_WA901ND_V4 is not set
-# CONFIG_ATH79_MACH_TL_WAX50RE is not set
-# CONFIG_ATH79_MACH_TL_WDR3320_V2 is not set
-# CONFIG_ATH79_MACH_TL_WDR3500 is not set
-# CONFIG_ATH79_MACH_TL_WDR4300 is not set
-# CONFIG_ATH79_MACH_TL_WDR6500_V2 is not set
-# CONFIG_ATH79_MACH_TL_WPA8630 is not set
-# CONFIG_ATH79_MACH_TL_WR1041N_V2 is not set
-# CONFIG_ATH79_MACH_TL_WR1043ND is not set
-# CONFIG_ATH79_MACH_TL_WR1043ND_V2 is not set
-# CONFIG_ATH79_MACH_TL_WR1043ND_V4 is not set
-# CONFIG_ATH79_MACH_TL_WR1043N_V5 is not set
-# CONFIG_ATH79_MACH_TL_WR2543N is not set
-# CONFIG_ATH79_MACH_TL_WR703N is not set
-# CONFIG_ATH79_MACH_TL_WR720N_V3 is not set
-# CONFIG_ATH79_MACH_TL_WR741ND is not set
-# CONFIG_ATH79_MACH_TL_WR741ND_V4 is not set
-# CONFIG_ATH79_MACH_TL_WR802N_V1 is not set
-# CONFIG_ATH79_MACH_TL_WR802N_V2 is not set
-# CONFIG_ATH79_MACH_TL_WR810N is not set
-# CONFIG_ATH79_MACH_TL_WR810N_V2 is not set
-# CONFIG_ATH79_MACH_TL_WR840N_V2 is not set
-# CONFIG_ATH79_MACH_TL_WR841N_V1 is not set
-# CONFIG_ATH79_MACH_TL_WR841N_V8 is not set
-# CONFIG_ATH79_MACH_TL_WR841N_V9 is not set
-# CONFIG_ATH79_MACH_TL_WR902AC_V1 is not set
-# CONFIG_ATH79_MACH_TL_WR940N_V4 is not set
-# CONFIG_ATH79_MACH_TL_WR941ND is not set
-# CONFIG_ATH79_MACH_TL_WR941ND_V6 is not set
-# CONFIG_ATH79_MACH_TL_WR942N_V1 is not set
-# CONFIG_ATH79_MACH_TS_D084 is not set
-# CONFIG_ATH79_MACH_TUBE2H is not set
-# CONFIG_ATH79_MACH_UBNT is not set
-# CONFIG_ATH79_MACH_UBNT_UNIFIAC is not set
-# CONFIG_ATH79_MACH_UBNT_XM is not set
-# CONFIG_ATH79_MACH_WAM250 is not set
-# CONFIG_ATH79_MACH_WEIO is not set
-# CONFIG_ATH79_MACH_WHR_HP_G300N is not set
-# CONFIG_ATH79_MACH_WI2A_AC200I is not set
-# CONFIG_ATH79_MACH_WIFI_PINEAPPLE_NANO is not set
-# CONFIG_ATH79_MACH_WLAE_AG300N is not set
-# CONFIG_ATH79_MACH_WLR8100 is not set
-# CONFIG_ATH79_MACH_WNDAP360 is not set
-# CONFIG_ATH79_MACH_WNDR3700 is not set
-# CONFIG_ATH79_MACH_WNDR4300 is not set
-# CONFIG_ATH79_MACH_WNR2000 is not set
-# CONFIG_ATH79_MACH_WNR2000_V3 is not set
-# CONFIG_ATH79_MACH_WNR2000_V4 is not set
-# CONFIG_ATH79_MACH_WNR2200 is not set
-# CONFIG_ATH79_MACH_WP543 is not set
-# CONFIG_ATH79_MACH_WPE72 is not set
-# CONFIG_ATH79_MACH_WPJ342 is not set
-# CONFIG_ATH79_MACH_WPJ344 is not set
-# CONFIG_ATH79_MACH_WPJ531 is not set
-# CONFIG_ATH79_MACH_WPJ558 is not set
-# CONFIG_ATH79_MACH_WPJ563 is not set
-# CONFIG_ATH79_MACH_WRT160NL is not set
-# CONFIG_ATH79_MACH_WRT400N is not set
-# CONFIG_ATH79_MACH_WRTNODE2Q is not set
-# CONFIG_ATH79_MACH_WZR_450HP2 is not set
-# CONFIG_ATH79_MACH_WZR_HP_AG300H is not set
-# CONFIG_ATH79_MACH_WZR_HP_G300NH is not set
-# CONFIG_ATH79_MACH_WZR_HP_G300NH2 is not set
-# CONFIG_ATH79_MACH_WZR_HP_G450H is not set
-# CONFIG_ATH79_MACH_XD3200 is not set
-# CONFIG_ATH79_MACH_Z1 is not set
-# CONFIG_ATH79_MACH_ZBT_WE1526 is not set
-# CONFIG_ATH79_MACH_ZCN_1523H is not set
-# CONFIG_ATH79_NVRAM is not set
-# CONFIG_ATH79_PCI_ATH9K_FIXUP is not set
-# CONFIG_ATH79_ROUTERBOOT is not set
-CONFIG_ATH79_WDT=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs noinitrd"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMMON_CLK=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_ATH79=y
-CONFIG_GPIO_GENERIC=y
-# CONFIG_GPIO_LATCH is not set
-CONFIG_GPIO_NXP_74HC153=y
-CONFIG_GPIO_PCF857X=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_GPIO=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_SOURCE="../../root"
-CONFIG_INTEL_XWAY_PHY=y
-CONFIG_IP17XX_PHY=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_LEDS_GPIO=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MDIO_GPIO=y
-CONFIG_MICREL_PHY=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CYBERTAN_PARTS=y
-CONFIG_MTD_M25P80=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_EVA_FW=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_LZMA_FW=y
-CONFIG_MTD_SPLIT_MINOR_FW=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_TPLINK_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_SPLIT_WRGG_FW=y
-CONFIG_MTD_TPLINK_PARTS=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6060=y
-CONFIG_NET_DSA_MV88E6063=y
-CONFIG_NET_DSA_TAG_TRAILER=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_NO_IOPORT_MAP is not set
-# CONFIG_OF is not set
-# CONFIG_PCI_AR724X is not set
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_RATIONAL=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RTL8306_PHY=y
-CONFIG_RTL8366RB_PHY=y
-CONFIG_RTL8366S_PHY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_RTL8367_PHY=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_FSL is not set
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SOC_AR71XX is not set
-# CONFIG_SOC_AR724X is not set
-# CONFIG_SOC_AR913X is not set
-# CONFIG_SOC_AR933X is not set
-# CONFIG_SOC_AR934X is not set
-# CONFIG_SOC_QCA953X is not set
-# CONFIG_SOC_QCA955X is not set
-# CONFIG_SOC_QCA956X is not set
-CONFIG_SPI=y
-CONFIG_SPI_ATH79=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-# CONFIG_SPI_RB4XX is not set
-# CONFIG_SPI_VSC7385 is not set
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_USB_SUPPORT=y
+++ /dev/null
---- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
-@@ -14,6 +14,7 @@
- struct ath79_spi_platform_data {
- unsigned bus_num;
- unsigned num_chipselect;
-+ int *cs_gpios;
- };
-
- #endif /* _ATH79_SPI_PLATFORM_H */
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -231,6 +231,7 @@ static int ath79_spi_probe(struct platfo
- if (pdata) {
- master->bus_num = pdata->bus_num;
- master->num_chipselect = pdata->num_chipselect;
-+ master->cs_gpios = pdata->cs_gpios;
- }
-
- sp->bitbang.master = master;
+++ /dev/null
---- /dev/null
-+++ b/arch/mips/ath79/gpio.c
-@@ -0,0 +1,59 @@
-+/*
-+ * Atheros AR71XX/AR724X/AR913X GPIO API support
-+ *
-+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
-+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/io.h>
-+#include <linux/gpio.h>
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+#include <asm/mach-ath79/ath79.h>
-+#include "common.h"
-+
-+void __iomem *ath79_gpio_base;
-+EXPORT_SYMBOL_GPL(ath79_gpio_base);
-+
-+static void __iomem *ath79_gpio_get_function_reg(void)
-+{
-+ u32 reg = 0;
-+
-+ if (soc_is_ar71xx() ||
-+ soc_is_ar724x() ||
-+ soc_is_ar913x() ||
-+ soc_is_ar933x())
-+ reg = AR71XX_GPIO_REG_FUNC;
-+ else if (soc_is_ar934x())
-+ reg = AR934X_GPIO_REG_FUNC;
-+ else
-+ BUG();
-+
-+ return ath79_gpio_base + reg;
-+}
-+
-+void ath79_gpio_function_setup(u32 set, u32 clear)
-+{
-+ void __iomem *reg = ath79_gpio_get_function_reg();
-+
-+ __raw_writel((__raw_readl(reg) & ~clear) | set, reg);
-+ /* flush write */
-+ __raw_readl(reg);
-+}
-+
-+void ath79_gpio_function_enable(u32 mask)
-+{
-+ ath79_gpio_function_setup(mask, 0);
-+}
-+
-+void ath79_gpio_function_disable(u32 mask)
-+{
-+ ath79_gpio_function_setup(0, mask);
-+}
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -118,6 +118,7 @@ static inline int soc_is_qca955x(void)
- void ath79_ddr_wb_flush(unsigned int reg);
- void ath79_ddr_set_pci_windows(void);
-
-+extern void __iomem *ath79_gpio_base;
- extern void __iomem *ath79_pll_base;
- extern void __iomem *ath79_reset_base;
-
---- a/arch/mips/ath79/dev-common.c
-+++ b/arch/mips/ath79/dev-common.c
-@@ -156,4 +156,5 @@ void __init ath79_gpio_init(void)
- }
-
- platform_device_register(&ath79_gpio_device);
-+ ath79_gpio_base = ioremap(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
- }
---- a/arch/mips/ath79/common.h
-+++ b/arch/mips/ath79/common.h
-@@ -24,6 +24,9 @@ unsigned long ath79_get_sys_clk_rate(con
-
- void ath79_ddr_ctrl_init(void);
-
-+void ath79_gpio_function_enable(u32 mask);
-+void ath79_gpio_function_disable(u32 mask);
-+void ath79_gpio_function_setup(u32 set, u32 clear);
- void ath79_gpio_init(void);
-
- #endif /* __ATH79_COMMON_H */
+++ /dev/null
-HACK: register the GPIO driver earlier to ensure that gpio_request calls
-from mach files succeed.
-
---- a/drivers/gpio/gpio-ath79.c
-+++ b/drivers/gpio/gpio-ath79.c
-@@ -322,7 +322,11 @@ static struct platform_driver ath79_gpio
- .remove = ath79_gpio_remove,
- };
-
--module_platform_driver(ath79_gpio_driver);
-+static int __init ath79_gpio_init(void)
-+{
-+ return platform_driver_register(&ath79_gpio_driver);
-+}
-+postcore_initcall(ath79_gpio_init);
-
- MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X GPIO API support");
- MODULE_LICENSE("GPL v2");
+++ /dev/null
-From 8b7a76e72fc819753878cd5684e243f33f847c79 Mon Sep 17 00:00:00 2001
-From: Markos Chandras <markos.chandras@imgtec.com>
-Date: Wed, 21 Aug 2013 11:47:22 +0100
-Subject: [PATCH] MIPS: ath79: Avoid using unitialized 'reg' variable
-
-Fixes the following build error:
-arch/mips/include/asm/mach-ath79/ath79.h:139:20: error: 'reg' may be used
-uninitialized in this function [-Werror=maybe-uninitialized]
-arch/mips/ath79/common.c:62:6: note: 'reg' was declared here
-In file included from arch/mips/ath79/common.c:20:0:
-arch/mips/ath79/common.c: In function 'ath79_device_reset_clear':
-arch/mips/include/asm/mach-ath79/ath79.h:139:20:
-error: 'reg' may be used uninitialized in this function
-[-Werror=maybe-uninitialized]
-arch/mips/ath79/common.c:90:6: note: 'reg' was declared here
-
-Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
-Acked-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/common.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -106,7 +106,7 @@ void ath79_device_reset_set(u32 mask)
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
- else
-- BUG();
-+ panic("Reset register not defined for this SOC");
-
- spin_lock_irqsave(&ath79_device_reset_lock, flags);
- t = ath79_reset_rr(reg);
-@@ -134,7 +134,7 @@ void ath79_device_reset_clear(u32 mask)
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
- else
-- BUG();
-+ panic("Reset register not defined for this SOC");
-
- spin_lock_irqsave(&ath79_device_reset_lock, flags);
- t = ath79_reset_rr(reg);
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 9 Dec 2016 20:09:16 +0100
-Subject: [PATCH] spi: spi-ath79: support multiple internal chip select
- lines
-
-Several devices with multiple flash chips use the internal chip select
-lines. Don't assume that chip select 1 and above are GPIO lines.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -78,14 +78,16 @@ static void ath79_spi_chipselect(struct
- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
- }
-
-- if (spi->chip_select) {
-+ if (gpio_is_valid(spi->cs_gpio)) {
- /* SPI is normally active-low */
- gpio_set_value(spi->cs_gpio, cs_high);
- } else {
-+ u32 cs_bit = AR71XX_SPI_IOC_CS(spi->chip_select);
-+
- if (cs_high)
-- sp->ioc_base |= AR71XX_SPI_IOC_CS0;
-+ sp->ioc_base |= cs_bit;
- else
-- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
-+ sp->ioc_base &= ~cs_bit;
-
- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
- }
-@@ -118,11 +120,8 @@ static int ath79_spi_setup_cs(struct spi
- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
- int status;
-
-- if (spi->chip_select && !gpio_is_valid(spi->cs_gpio))
-- return -EINVAL;
--
- status = 0;
-- if (spi->chip_select) {
-+ if (gpio_is_valid(spi->cs_gpio)) {
- unsigned long flags;
-
- flags = GPIOF_DIR_OUT;
-@@ -134,10 +133,12 @@ static int ath79_spi_setup_cs(struct spi
- status = gpio_request_one(spi->cs_gpio, flags,
- dev_name(&spi->dev));
- } else {
-+ u32 cs_bit = AR71XX_SPI_IOC_CS(spi->chip_select);
-+
- if (spi->mode & SPI_CS_HIGH)
-- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
-+ sp->ioc_base &= ~cs_bit;
- else
-- sp->ioc_base |= AR71XX_SPI_IOC_CS0;
-+ sp->ioc_base |= cs_bit;
-
- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
- }
-@@ -147,7 +148,7 @@ static int ath79_spi_setup_cs(struct spi
-
- static void ath79_spi_cleanup_cs(struct spi_device *spi)
- {
-- if (spi->chip_select) {
-+ if (gpio_is_valid(spi->cs_gpio)) {
- gpio_free(spi->cs_gpio);
- }
- }
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 9 Dec 2016 20:11:35 +0100
-Subject: [PATCH] spi: spi-ath79: use gpio_set_value_cansleep for GPIO chip
- select
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -80,7 +80,7 @@ static void ath79_spi_chipselect(struct
-
- if (gpio_is_valid(spi->cs_gpio)) {
- /* SPI is normally active-low */
-- gpio_set_value(spi->cs_gpio, cs_high);
-+ gpio_set_value_cansleep(spi->cs_gpio, cs_high);
- } else {
- u32 cs_bit = AR71XX_SPI_IOC_CS(spi->chip_select);
-
+++ /dev/null
-From 460f382c278fe66059a773c41cbcd0db86d53983 Mon Sep 17 00:00:00 2001
-From: Mathias Kresin <dev@kresin.me>
-Date: Thu, 13 Apr 2017 09:47:42 +0200
-Subject: [PATCH] MIPS: pci-ar724x: get PCIe controller out of reset
-
-The ar724x pci driver expects the PCIe controller to be brought out of
-reset by the bootloader.
-
-At least the AVM Fritz 300E bootloader doesn't take care of releasing
-the different PCIe controller related resets which causes an endless
-hang as soon as either the PCIE Reset register (0x180f0018) or the PCI
-Application Control register (0x180f0000) is read from.
-
-Do the full "PCIE Root Complex Initialization Sequence" if the PCIe
-host controller is still in reset during probing.
-
-The QCA u-boot sleeps 10ms after the PCIE Application Control bit is
-set to ready. It has been shown that 10ms might not be enough time if
-PCIe should be used right after setting the bit. During my tests it
-took up to 20ms till the link was up. Giving the link up to 100ms
-should work for all cases.
-
-Signed-off-by: Mathias Kresin <dev@kresin.me>
----
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 3 ++
- arch/mips/pci/pci-ar724x.c | 42 ++++++++++++++++++++++++++
- 2 files changed, 45 insertions(+)
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -169,6 +169,9 @@
- #define AR724X_PLL_REG_CPU_CONFIG 0x00
- #define AR724X_PLL_REG_PCIE_CONFIG 0x10
-
-+#define AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS BIT(16)
-+#define AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET BIT(25)
-+
- #define AR724X_PLL_FB_SHIFT 0
- #define AR724X_PLL_FB_MASK 0x3ff
- #define AR724X_PLL_REF_DIV_SHIFT 10
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -12,14 +12,18 @@
- #include <linux/irq.h>
- #include <linux/pci.h>
- #include <linux/init.h>
-+#include <linux/delay.h>
- #include <linux/platform_device.h>
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
-
-+#define AR724X_PCI_REG_APP 0x0
- #define AR724X_PCI_REG_RESET 0x18
- #define AR724X_PCI_REG_INT_STATUS 0x4c
- #define AR724X_PCI_REG_INT_MASK 0x50
-
-+#define AR724X_PCI_APP_LTSSM_ENABLE BIT(0)
-+
- #define AR724X_PCI_RESET_LINK_UP BIT(0)
-
- #define AR724X_PCI_INT_DEV0 BIT(14)
-@@ -325,6 +329,37 @@ static void ar724x_pci_irq_init(struct a
- apc);
- }
-
-+static void ar724x_pci_hw_init(struct ar724x_pci_controller *apc)
-+{
-+ u32 ppl, app;
-+ int wait = 0;
-+
-+ /* deassert PCIe host controller and PCIe PHY reset */
-+ ath79_device_reset_clear(AR724X_RESET_PCIE);
-+ ath79_device_reset_clear(AR724X_RESET_PCIE_PHY);
-+
-+ /* remove the reset of the PCIE PLL */
-+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
-+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
-+
-+ /* deassert bypass for the PCIE PLL */
-+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
-+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
-+
-+ /* set PCIE Application Control to ready */
-+ app = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_APP);
-+ app |= AR724X_PCI_APP_LTSSM_ENABLE;
-+ __raw_writel(app, apc->ctrl_base + AR724X_PCI_REG_APP);
-+
-+ /* wait up to 100ms for PHY link up */
-+ do {
-+ mdelay(10);
-+ wait++;
-+ } while (wait < 10 && !ar724x_pci_check_link(apc));
-+}
-+
- static int ar724x_pci_probe(struct platform_device *pdev)
- {
- struct ar724x_pci_controller *apc;
-@@ -383,6 +418,13 @@ static int ar724x_pci_probe(struct platf
- apc->pci_controller.io_resource = &apc->io_res;
- apc->pci_controller.mem_resource = &apc->mem_res;
-
-+ /*
-+ * Do the full PCIE Root Complex Initialization Sequence if the PCIe
-+ * host controller is in reset.
-+ */
-+ if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE)
-+ ar724x_pci_hw_init(apc);
-+
- apc->link_up = ar724x_pci_check_link(apc);
- if (!apc->link_up)
- dev_warn(&pdev->dev, "PCIe link is down\n");
+++ /dev/null
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -62,10 +62,26 @@ static void __init ar913x_wmac_setup(voi
-
- static int ar933x_wmac_reset(void)
- {
-+ int retries = 20;
-+
- ath79_device_reset_set(AR933X_RESET_WMAC);
- ath79_device_reset_clear(AR933X_RESET_WMAC);
-
-- return 0;
-+ while (1) {
-+ u32 bootstrap;
-+
-+ bootstrap = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
-+ if ((bootstrap & AR933X_BOOTSTRAP_EEPBUSY) == 0)
-+ return 0;
-+
-+ if (retries-- == 0)
-+ break;
-+
-+ udelay(10000);
-+ }
-+
-+ pr_err("ar933x: WMAC reset timed out");
-+ return -ETIMEDOUT;
- }
-
- static int ar933x_r1_get_wmac_revision(void)
+++ /dev/null
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -44,7 +44,7 @@ static struct platform_device ath79_wmac
- },
- };
-
--static void __init ar913x_wmac_setup(void)
-+static int ar913x_wmac_reset(void)
- {
- /* reset the WMAC */
- ath79_device_reset_set(AR913X_RESET_AMBA2WMAC);
-@@ -53,10 +53,19 @@ static void __init ar913x_wmac_setup(voi
- ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC);
- mdelay(10);
-
-+ return 0;
-+}
-+
-+static void __init ar913x_wmac_setup(void)
-+{
-+ ar913x_wmac_reset();
-+
- ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
- ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
- ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
- ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
-+
-+ ath79_wmac_data.external_reset = ar913x_wmac_reset;
- }
-
-
+++ /dev/null
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -139,6 +139,8 @@ static void ar934x_wmac_setup(void)
- ath79_wmac_data.is_clk_25mhz = false;
- else
- ath79_wmac_data.is_clk_25mhz = true;
-+
-+ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
- }
-
- static void qca955x_wmac_setup(void)
+++ /dev/null
---- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
-+++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
-@@ -36,6 +36,7 @@
- #define cpu_has_mdmx 0
- #define cpu_has_mips3d 0
- #define cpu_has_smartmips 0
-+#define cpu_has_rixi 0
-
- #define cpu_has_mips32r1 1
- #define cpu_has_mips32r2 1
-@@ -43,6 +44,7 @@
- #define cpu_has_mips64r2 0
-
- #define cpu_has_mipsmt 0
-+#define cpu_has_userlocal 0
-
- #define cpu_has_64bits 0
- #define cpu_has_64bit_zero_reg 0
-@@ -51,5 +53,9 @@
-
- #define cpu_dcache_line_size() 32
- #define cpu_icache_line_size() 32
-+#define cpu_has_vtag_icache 0
-+#define cpu_has_dc_aliases 1
-+#define cpu_has_ic_fills_f_dc 0
-+#define cpu_has_pindexed_dcache 0
-
- #endif /* __ASM_MACH_ATH79_CPU_FEATURE_OVERRIDES_H */
+++ /dev/null
---- a/arch/mips/include/asm/mips_machine.h
-+++ b/arch/mips/include/asm/mips_machine.h
-@@ -36,6 +36,18 @@ static struct mips_machine machine_##_ty
- .mach_setup = _setup, \
- };
-
-+#define MIPS_MACHINE_NONAME(_type, _id, _setup) \
-+static const char machine_id_##_type[] __initconst \
-+ __aligned(1) = _id; \
-+static struct mips_machine machine_##_type \
-+ __used __section(.mips.machines.init) = \
-+{ \
-+ .mach_type = _type, \
-+ .mach_id = machine_id_##_type, \
-+ .mach_name = NULL, \
-+ .mach_setup = _setup, \
-+};
-+
- extern long __mips_machines_start;
- extern long __mips_machines_end;
-
+++ /dev/null
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -247,6 +247,9 @@ config LZMA_COMPRESS
- config LZMA_DECOMPRESS
- tristate
-
-+config RLE_DECOMPRESS
-+ tristate
-+
- #
- # These all provide a common interface (hence the apparent duplication with
- # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
---- a/lib/Makefile
-+++ b/lib/Makefile
-@@ -120,6 +120,7 @@ obj-$(CONFIG_XZ_DEC) += xz/
- obj-$(CONFIG_RAID6_PQ) += raid6/
- obj-$(CONFIG_LZMA_COMPRESS) += lzma/
- obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
-+obj-$(CONFIG_RLE_DECOMPRESS) += rle.o
-
- lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
- lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
---- /dev/null
-+++ b/include/linux/rle.h
-@@ -0,0 +1,18 @@
-+#ifndef _RLE_H_
-+#define _RLE_H_
-+
-+#ifdef CONFIG_RLE_DECOMPRESS
-+int rle_decode(const unsigned char *src, size_t srclen,
-+ unsigned char *dst, size_t dstlen,
-+ size_t *src_done, size_t *dst_done);
-+#else
-+static inline int
-+rle_decode(const unsigned char *src, size_t srclen,
-+ unsigned char *dst, size_t dstlen,
-+ size_t *src_done, size_t *dst_done)
-+{
-+ return -ENOTSUPP;
-+}
-+#endif /* CONFIG_RLE_DECOMPRESS */
-+
-+#endif /* _RLE_H_ */
---- /dev/null
-+++ b/lib/rle.c
-@@ -0,0 +1,78 @@
-+/*
-+ * RLE decoding routine
-+ *
-+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/rle.h>
-+
-+int rle_decode(const unsigned char *src, size_t srclen,
-+ unsigned char *dst, size_t dstlen,
-+ size_t *src_done, size_t *dst_done)
-+{
-+ size_t srcpos, dstpos;
-+ int ret;
-+
-+ srcpos = 0;
-+ dstpos = 0;
-+ ret = -EINVAL;
-+
-+ /* sanity checks */
-+ if (!src || !srclen || !dst || !dstlen)
-+ goto out;
-+
-+ while (1) {
-+ char count;
-+
-+ if (srcpos >= srclen)
-+ break;
-+
-+ count = (char) src[srcpos++];
-+ if (count == 0) {
-+ ret = 0;
-+ break;
-+ }
-+
-+ if (count > 0) {
-+ unsigned char c;
-+
-+ if (srcpos >= srclen)
-+ break;
-+
-+ c = src[srcpos++];
-+
-+ while (count--) {
-+ if (dstpos >= dstlen)
-+ break;
-+
-+ dst[dstpos++] = c;
-+ }
-+ } else {
-+ count *= -1;
-+
-+ while (count--) {
-+ if (srcpos >= srclen)
-+ break;
-+ if (dstpos >= dstlen)
-+ break;
-+ dst[dstpos++] = src[srcpos++];
-+ }
-+ }
-+ }
-+
-+out:
-+ if (src_done)
-+ *src_done = srcpos;
-+ if (dst_done)
-+ *dst_done = dstpos;
-+
-+ return ret;
-+}
-+
-+EXPORT_SYMBOL_GPL(rle_decode);
+++ /dev/null
---- a/drivers/mtd/maps/physmap.c
-+++ b/drivers/mtd/maps/physmap.c
-@@ -31,6 +31,66 @@ struct physmap_flash_info {
- int vpp_refcnt;
- };
-
-+static struct platform_device *physmap_map2pdev(struct map_info *map)
-+{
-+ return (struct platform_device *) map->map_priv_1;
-+}
-+
-+static void physmap_lock(struct map_info *map)
-+{
-+ struct platform_device *pdev;
-+ struct physmap_flash_data *physmap_data;
-+
-+ pdev = physmap_map2pdev(map);
-+ physmap_data = pdev->dev.platform_data;
-+ physmap_data->lock(pdev);
-+}
-+
-+static void physmap_unlock(struct map_info *map)
-+{
-+ struct platform_device *pdev;
-+ struct physmap_flash_data *physmap_data;
-+
-+ pdev = physmap_map2pdev(map);
-+ physmap_data = pdev->dev.platform_data;
-+ physmap_data->unlock(pdev);
-+}
-+
-+static map_word physmap_flash_read_lock(struct map_info *map, unsigned long ofs)
-+{
-+ map_word ret;
-+
-+ physmap_lock(map);
-+ ret = inline_map_read(map, ofs);
-+ physmap_unlock(map);
-+
-+ return ret;
-+}
-+
-+static void physmap_flash_write_lock(struct map_info *map, map_word d,
-+ unsigned long ofs)
-+{
-+ physmap_lock(map);
-+ inline_map_write(map, d, ofs);
-+ physmap_unlock(map);
-+}
-+
-+static void physmap_flash_copy_from_lock(struct map_info *map, void *to,
-+ unsigned long from, ssize_t len)
-+{
-+ physmap_lock(map);
-+ inline_map_copy_from(map, to, from, len);
-+ physmap_unlock(map);
-+}
-+
-+static void physmap_flash_copy_to_lock(struct map_info *map, unsigned long to,
-+ const void *from, ssize_t len)
-+{
-+ physmap_lock(map);
-+ inline_map_copy_to(map, to, from, len);
-+ physmap_unlock(map);
-+}
-+
- static int physmap_flash_remove(struct platform_device *dev)
- {
- struct physmap_flash_info *info;
-@@ -153,6 +213,13 @@ static int physmap_flash_probe(struct pl
-
- simple_map_init(&info->map[i]);
-
-+ if (physmap_data->lock && physmap_data->unlock) {
-+ info->map[i].read = physmap_flash_read_lock;
-+ info->map[i].write = physmap_flash_write_lock;
-+ info->map[i].copy_from = physmap_flash_copy_from_lock;
-+ info->map[i].copy_to = physmap_flash_copy_to_lock;
-+ }
-+
- probe_type = rom_probe_types;
- if (physmap_data->probe_type == NULL) {
- for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
---- a/include/linux/mtd/physmap.h
-+++ b/include/linux/mtd/physmap.h
-@@ -25,6 +25,8 @@ struct physmap_flash_data {
- unsigned int width;
- int (*init)(struct platform_device *);
- void (*exit)(struct platform_device *);
-+ void (*lock)(struct platform_device *);
-+ void (*unlock)(struct platform_device *);
- void (*set_vpp)(struct platform_device *, int);
- unsigned int nr_parts;
- unsigned int pfow_base;
+++ /dev/null
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -148,6 +148,7 @@
- #define SST39LF160 0x2782
- #define SST39VF1601 0x234b
- #define SST39VF3201 0x235b
-+#define SST39VF6401B 0x236d
- #define SST39WF1601 0x274b
- #define SST39WF1602 0x274a
- #define SST39LF512 0x00D4
-@@ -1569,6 +1570,18 @@ static const struct amd_flash_info jedec
- ERASEINFO(0x10000,64),
- }
- }, {
-+ .mfr_id = CFI_MFR_SST,
-+ .dev_id = SST39VF6401B,
-+ .name = "SST 39VF6401B",
-+ .devtypes = CFI_DEVICETYPE_X16,
-+ .uaddr = MTD_UADDR_0xAAAA_0x5555,
-+ .dev_size = SIZE_8MiB,
-+ .cmd_set = P_ID_AMD_STD,
-+ .nr_regions = 1,
-+ .regions = {
-+ ERASEINFO(0x10000,128)
-+ }
-+ }, {
- .mfr_id = CFI_MFR_ST,
- .dev_id = M29F800AB,
- .name = "ST M29F800AB",
+++ /dev/null
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -178,6 +178,12 @@ menu "Partition parsers"
- source "drivers/mtd/parsers/Kconfig"
- endmenu
-
-+config MTD_CYBERTAN_PARTS
-+ tristate "Cybertan partitioning support"
-+ depends on ATH79
-+ ---help---
-+ Cybertan partitioning support
-+
- config MTD_MYLOADER_PARTS
- tristate "MyLoader partition parsing"
- depends on ADM5120 || ATH25 || ATH79
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63
- obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- obj-y += parsers/
-+obj-$(CONFIG_MTD_CYBERTAN_PARTS) += cybertan_part.o
-
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o
+++ /dev/null
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -200,6 +200,12 @@ config MTD_MYLOADER_PARTS
- You will still need the parsing functions to be called by the driver
- for your particular device. It won't happen automatically.
-
-+config MTD_TPLINK_PARTS
-+ tristate "TP-Link AR7XXX/AR9XXX partitioning support"
-+ depends on ATH79
-+ ---help---
-+ TBD.
-+
- comment "User Modules And Translation Layers"
-
- #
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63
- obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- obj-y += parsers/
-+obj-$(CONFIG_MTD_TPLINK_PARTS) += tplinkpart.o
- obj-$(CONFIG_MTD_CYBERTAN_PARTS) += cybertan_part.o
-
- # 'Users' - code which presents functionality to userspace.
+++ /dev/null
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -195,6 +195,7 @@ static ssize_t m25p80_read(struct spi_no
- */
- static int m25p_probe(struct spi_device *spi)
- {
-+ struct mtd_part_parser_data ppdata = {0,};
- struct flash_platform_data *data;
- struct m25p *flash;
- struct spi_nor *nor;
-@@ -247,8 +248,11 @@ static int m25p_probe(struct spi_device
- if (ret)
- return ret;
-
-- return mtd_device_register(&nor->mtd, data ? data->parts : NULL,
-- data ? data->nr_parts : 0);
-+ return mtd_device_parse_register(&nor->mtd,
-+ data ? data->part_probes : NULL,
-+ &ppdata,
-+ data ? data->parts : NULL,
-+ data ? data->nr_parts : 0);
- }
-
-
---- a/include/linux/spi/flash.h
-+++ b/include/linux/spi/flash.h
-@@ -24,6 +24,7 @@ struct flash_platform_data {
- unsigned int nr_parts;
-
- char *type;
-+ const char **part_probes;
-
- /* we'll likely add more ... use JEDEC IDs, etc */
- };
+++ /dev/null
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -77,12 +77,18 @@ static int parse_redboot_partitions(stru
- static char nullstring[] = "unallocated";
- #endif
-
-+ buf = vmalloc(master->erasesize);
-+ if (!buf)
-+ return -ENOMEM;
-+
-+ restart:
- if ( directory < 0 ) {
- offset = master->size + directory * master->erasesize;
- while (mtd_block_isbad(master, offset)) {
- if (!offset) {
- nogood:
- printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
-+ vfree(buf);
- return -EIO;
- }
- offset -= master->erasesize;
-@@ -95,10 +101,6 @@ static int parse_redboot_partitions(stru
- goto nogood;
- }
- }
-- buf = vmalloc(master->erasesize);
--
-- if (!buf)
-- return -ENOMEM;
-
- printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
- master->name, offset);
-@@ -171,6 +173,11 @@ static int parse_redboot_partitions(stru
- }
- if (i == numslots) {
- /* Didn't find it */
-+ if (offset + master->erasesize < master->size) {
-+ /* not at the end of the flash yet, maybe next block :) */
-+ directory++;
-+ goto restart;
-+ }
- printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
- master->name);
- ret = 0;
+++ /dev/null
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -569,4 +569,8 @@ config MTD_NAND_MTK
- Enables support for NAND controller on MTK SoCs.
- This controller is found on mt27xx, mt81xx, mt65xx SoCs.
-
-+config MTD_NAND_RB4XX
-+ tristate "NAND flash driver for RouterBoard 4xx series"
-+ depends on MTD_NAND && ATH79_MACH_RB4XX
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -33,6 +33,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27
- obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
- obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
-+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
- obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o
+++ /dev/null
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -573,4 +573,8 @@ config MTD_NAND_RB4XX
- tristate "NAND flash driver for RouterBoard 4xx series"
- depends on MTD_NAND && ATH79_MACH_RB4XX
-
-+config MTD_NAND_RB750
-+ tristate "NAND flash driver for the RouterBoard 750"
-+ depends on MTD_NAND && ATH79_MACH_RB750
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx
- obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
- obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
-+obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
- obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o
+++ /dev/null
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -40,7 +40,7 @@
- #include <linux/mtd/xip.h>
-
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
-
- #define MAX_RETRIES 3
-
-@@ -51,7 +51,9 @@
-
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#if !FORCE_WORD_WRITE
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#endif
- static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
- static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
- static void cfi_amdstd_sync (struct mtd_info *);
-@@ -202,6 +204,7 @@ static void fixup_amd_bootblock(struct m
- }
- #endif
-
-+#if !FORCE_WORD_WRITE
- static void fixup_use_write_buffers(struct mtd_info *mtd)
- {
- struct map_info *map = mtd->priv;
-@@ -211,6 +214,7 @@ static void fixup_use_write_buffers(stru
- mtd->_write = cfi_amdstd_write_buffers;
- }
- }
-+#endif /* !FORCE_WORD_WRITE */
-
- /* Atmel chips don't use the same PRI format as AMD chips */
- static void fixup_convert_atmel_pri(struct mtd_info *mtd)
-@@ -1788,6 +1792,7 @@ static int cfi_amdstd_write_words(struct
- /*
- * FIXME: interleaved mode not tested, and probably not supported!
- */
-+#if !FORCE_WORD_WRITE
- static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
- unsigned long adr, const u_char *buf,
- int len)
-@@ -1916,7 +1921,6 @@ static int __xipram do_write_buffer(stru
- return ret;
- }
-
--
- static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
- {
-@@ -1991,6 +1995,7 @@ static int cfi_amdstd_write_buffers(stru
-
- return 0;
- }
-+#endif /* !FORCE_WORD_WRITE */
-
- /*
- * Wait for the flash chip to become ready to write data
+++ /dev/null
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -577,4 +577,12 @@ config MTD_NAND_RB750
- tristate "NAND flash driver for the RouterBoard 750"
- depends on MTD_NAND && ATH79_MACH_RB750
-
-+config MTD_NAND_AR934X
-+ tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs"
-+ depends on (SOC_AR934X || SOC_QCA955X)
-+
-+config MTD_NAND_AR934X_HW_ECC
-+ bool "Hardware ECC support for the AR934X NAND Controller (EXPERIMENTAL)"
-+ depends on MTD_NAND_AR934X
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-
- obj-$(CONFIG_MTD_NAND_DENALI) += denali.o
- obj-$(CONFIG_MTD_NAND_DENALI_PCI) += denali_pci.o
- obj-$(CONFIG_MTD_NAND_DENALI_DT) += denali_dt.o
-+obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nfc.o
- obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
- obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o
- obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o
+++ /dev/null
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -577,6 +577,10 @@ config MTD_NAND_RB750
- tristate "NAND flash driver for the RouterBoard 750"
- depends on MTD_NAND && ATH79_MACH_RB750
-
-+config MTD_NAND_RB91X
-+ tristate "NAND flash driver for the RouterBOARD 91x series"
-+ depends on MTD_NAND && ATH79_MACH_RB91X
-+
- config MTD_NAND_AR934X
- tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs"
- depends on (SOC_AR934X || SOC_QCA955X)
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -36,6 +36,7 @@ obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nan
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
- obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
- obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o
-+obj-$(CONFIG_MTD_NAND_RB91X) += rb91x_nand.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
- obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o
+++ /dev/null
---- a/drivers/net/ethernet/atheros/Kconfig
-+++ b/drivers/net/ethernet/atheros/Kconfig
-@@ -5,7 +5,7 @@
- config NET_VENDOR_ATHEROS
- bool "Atheros devices"
- default y
-- depends on PCI
-+ depends on (PCI || ATH79)
- ---help---
- If you have a network (Ethernet) card belonging to this class, say Y.
-
-@@ -78,4 +78,6 @@ config ALX
- To compile this driver as a module, choose M here. The module
- will be called alx.
-
-+source drivers/net/ethernet/atheros/ag71xx/Kconfig
-+
- endif # NET_VENDOR_ATHEROS
---- a/drivers/net/ethernet/atheros/Makefile
-+++ b/drivers/net/ethernet/atheros/Makefile
-@@ -2,6 +2,7 @@
- # Makefile for the Atheros network device drivers.
- #
-
-+obj-$(CONFIG_AG71XX) += ag71xx/
- obj-$(CONFIG_ATL1) += atlx/
- obj-$(CONFIG_ATL2) += atlx/
- obj-$(CONFIG_ATL1E) += atl1e/
+++ /dev/null
---- a/drivers/net/dsa/Kconfig
-+++ b/drivers/net/dsa/Kconfig
-@@ -9,6 +9,14 @@ config NET_DSA_MV88E6060
- This enables support for the Marvell 88E6060 ethernet switch
- chip.
-
-+config NET_DSA_MV88E6063
-+ bool "Marvell 88E6063 ethernet switch chip support"
-+ depends on NET_DSA
-+ select NET_DSA_TAG_TRAILER
-+ ---help---
-+ This enables support for the Marvell 88E6063 ethernet switch
-+ chip
-+
- config NET_DSA_BCM_SF2
- tristate "Broadcom Starfighter 2 Ethernet switch support"
- depends on HAS_IOMEM && NET_DSA
---- a/drivers/net/dsa/Makefile
-+++ b/drivers/net/dsa/Makefile
-@@ -1,4 +1,5 @@
- obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
-+obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
- obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm_sf2.o
- obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o
-
+++ /dev/null
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -77,8 +77,8 @@ obj-$(CONFIG_SCSI) += scsi/
- obj-y += nvme/
- obj-$(CONFIG_ATA) += ata/
- obj-$(CONFIG_TARGET_CORE) += target/
--obj-$(CONFIG_MTD) += mtd/
- obj-$(CONFIG_SPI) += spi/
-+obj-$(CONFIG_MTD) += mtd/
- obj-$(CONFIG_SPMI) += spmi/
- obj-$(CONFIG_HSI) += hsi/
- obj-y += net/
+++ /dev/null
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -533,6 +533,12 @@ config SPI_QUP
- This driver can also be built as a module. If so, the module
- will be called spi_qup.
-
-+config SPI_RB4XX
-+ tristate "Mikrotik RB4XX SPI master"
-+ depends on SPI_MASTER && ATH79_MACH_RB4XX
-+ help
-+ SPI controller driver for the Mikrotik RB4xx series boards.
-+
- config SPI_S3C24XX
- tristate "Samsung S3C24XX series SPI"
- depends on ARCH_S3C24XX
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -72,6 +72,7 @@ obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.
- spi-pxa2xx-platform-objs := spi-pxa2xx.o spi-pxa2xx-dma.o
- obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
- obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
-+obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
- obj-$(CONFIG_SPI_QUP) += spi-qup.o
- obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
- obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
+++ /dev/null
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -761,6 +761,13 @@ config SPI_TLE62X0
- sysfs interface, with each line presented as a kind of GPIO
- exposing both switch control and diagnostic feedback.
-
-+config SPI_RB4XX_CPLD
-+ tristate "MikroTik RB4XX CPLD driver"
-+ depends on ATH79_MACH_RB4XX
-+ help
-+ SPI driver for the Xilinx CPLD chip present on the
-+ MikroTik RB4xx boards.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -73,6 +73,7 @@ spi-pxa2xx-platform-objs := spi-pxa2xx.
- obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
- obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
- obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
-+obj-$(CONFIG_SPI_RB4XX_CPLD) += spi-rb4xx-cpld.o
- obj-$(CONFIG_SPI_QUP) += spi-qup.o
- obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
- obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
+++ /dev/null
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -768,6 +768,11 @@ config SPI_RB4XX_CPLD
- SPI driver for the Xilinx CPLD chip present on the
- MikroTik RB4xx boards.
-
-+config SPI_VSC7385
-+ tristate "Vitesse VSC7385 ethernet switch driver"
-+ help
-+ SPI driver for the Vitesse VSC7385 ethernet switch.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -99,6 +99,7 @@ spi-thunderx-objs := spi-cavium.o spi-
- obj-$(CONFIG_SPI_THUNDERX) += spi-thunderx.o
- obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
- obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
-+obj-$(CONFIG_SPI_VSC7385) += spi-vsc7385.o
- obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
- obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
- obj-$(CONFIG_SPI_XLP) += spi-xlp.o
+++ /dev/null
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -659,6 +659,13 @@ config LEDS_MLXCPLD
- This option enabled support for the LEDs on the Mellanox
- boards. Say Y to enabled these.
-
-+config LEDS_WNDR3700_USB
-+ tristate "NETGEAR WNDR3700 USB LED driver"
-+ depends on LEDS_CLASS && ATH79_MACH_WNDR3700
-+ help
-+ This option enables support for the USB LED found on the
-+ NETGEAR WNDR3700 board.
-+
- comment "LED Triggers"
- source "drivers/leds/trigger/Kconfig"
-
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -48,6 +48,7 @@ obj-$(CONFIG_LEDS_DA9052) += leds-da905
- obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
- obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
- obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
-+obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o
- obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o
- obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o
- obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o
+++ /dev/null
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -666,6 +666,10 @@ config LEDS_WNDR3700_USB
- This option enables support for the USB LED found on the
- NETGEAR WNDR3700 board.
-
-+config LEDS_RB750
-+ tristate "LED driver for the Mikrotik RouterBOARD 750"
-+ depends on LEDS_CLASS && ATH79_MACH_RB750
-+
- comment "LED Triggers"
- source "drivers/leds/trigger/Kconfig"
-
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -55,6 +55,7 @@ obj-$(CONFIG_LEDS_LT3593) += leds-lt359
- obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o
- obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o
- obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
-+obj-$(CONFIG_LEDS_RB750) += leds-rb750.o
- obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
- obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
- obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
+++ /dev/null
-From 183148e0789bee1cd5c46ba49afcb211f636f8a2 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@freemail.hu>
-Date: Mon, 15 Jan 2018 15:01:14 +0100
-Subject: [PATCH] leds: gpio: allow to use OPEN_{DRAIN,SOURCE} flags with
- legacy GPIOs
-
-LEDs which are connected to open-source or open-drain type of GPIO lines
-can be used only, if those are defined via devicetree.
-Add two new fields to 'struct gpio_led' in order to make it possible to
-specify this type of GPIO lines to the leds-gpio driver via platform data.
-Also update the create_gpio_led() function to set the GPIOF_OPEN_DRAIN and
-GPIOF_OPEN_SOURCE flags for the given GPIO line.
-
-Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
----
- drivers/leds/leds-gpio.c | 6 ++++++
- include/linux/leds.h | 2 ++
- 2 files changed, 8 insertions(+)
-
---- a/drivers/leds/leds-gpio.c
-+++ b/drivers/leds/leds-gpio.c
-@@ -100,6 +100,12 @@ static int create_gpio_led(const struct
- if (template->active_low)
- flags |= GPIOF_ACTIVE_LOW;
-
-+ if (template->open_drain)
-+ flags |= GPIOF_OPEN_DRAIN;
-+
-+ if (template->open_source)
-+ flags |= GPIOF_OPEN_SOURCE;
-+
- ret = devm_gpio_request_one(parent, template->gpio, flags,
- template->name);
- if (ret < 0)
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -380,6 +380,8 @@ struct gpio_led {
- unsigned panic_indicator : 1;
- unsigned default_state : 2;
- /* default_state should be one of LEDS_GPIO_DEFSTATE_(ON|OFF|KEEP) */
-+ unsigned open_drain : 1;
-+ unsigned open_source : 1;
- struct gpio_desc *gpiod;
- };
- #define LEDS_GPIO_DEFSTATE_OFF 0
+++ /dev/null
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -1213,4 +1213,12 @@ config GPIO_VIPERBOARD
-
- endmenu
-
-+comment "Other GPIO expanders"
-+
-+config GPIO_NXP_74HC153
-+ tristate "NXP 74HC153 Dual 4-input multiplexer"
-+ help
-+ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
-+ provides a GPIO interface supporting input mode only.
-+
- endif
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -83,6 +83,7 @@ obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o
- obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o
- obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o
- obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o
-+obj-$(CONFIG_GPIO_NXP_74HC153) += gpio-nxp-74hc153.o
- obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o
- obj-$(CONFIG_GPIO_OMAP) += gpio-omap.o
- obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
+++ /dev/null
---- a/drivers/gpio/gpio-74x164.c
-+++ b/drivers/gpio/gpio-74x164.c
-@@ -12,6 +12,7 @@
- #include <linux/init.h>
- #include <linux/mutex.h>
- #include <linux/spi/spi.h>
-+#include <linux/spi/74x164.h>
- #include <linux/gpio.h>
- #include <linux/of_gpio.h>
- #include <linux/slab.h>
-@@ -103,9 +104,16 @@ static int gen_74x164_direction_output(s
- static int gen_74x164_probe(struct spi_device *spi)
- {
- struct gen_74x164_chip *chip;
-+ struct gen_74x164_chip_platform_data *pdata = spi->dev.platform_data;
-+ struct device_node *np = spi->dev.of_node;
- u32 nregs;
- int ret;
-
-+ if (!np && !pdata) {
-+ dev_err(&spi->dev, "No configuration data available.\n");
-+ return -EINVAL;
-+ }
-+
- /*
- * bits_per_word cannot be configured in platform data
- */
-@@ -115,12 +123,15 @@ static int gen_74x164_probe(struct spi_d
- if (ret < 0)
- return ret;
-
-- if (of_property_read_u32(spi->dev.of_node, "registers-number",
-- &nregs)) {
-- dev_err(&spi->dev,
-- "Missing registers-number property in the DT.\n");
-- return -EINVAL;
-- }
-+ if (np) {
-+ if (of_property_read_u32(np, "registers-number", &nregs)) {
-+ dev_err(&spi->dev,
-+ "Missing registers-number property in the DT.\n");
-+ return -EINVAL;
-+ }
-+ } else if (pdata) {
-+ nregs = pdata->num_registers;
-+ }
-
- chip = devm_kzalloc(&spi->dev, sizeof(*chip) + nregs, GFP_KERNEL);
- if (!chip)
-@@ -133,7 +144,11 @@ static int gen_74x164_probe(struct spi_d
- chip->gpio_chip.get = gen_74x164_get_value;
- chip->gpio_chip.set = gen_74x164_set_value;
- chip->gpio_chip.set_multiple = gen_74x164_set_multiple;
-- chip->gpio_chip.base = -1;
-+ if (np)
-+ chip->gpio_chip.base = -1;
-+ else if (pdata)
-+ chip->gpio_chip.base = pdata->base;
-+
-
- chip->registers = nregs;
- chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers;
-@@ -142,6 +157,9 @@ static int gen_74x164_probe(struct spi_d
- chip->gpio_chip.parent = &spi->dev;
- chip->gpio_chip.owner = THIS_MODULE;
-
-+ if (pdata && pdata->init_data)
-+ memcpy(chip->buffer, pdata->init_data, chip->registers);
-+
- mutex_init(&chip->lock);
-
- ret = __gen_74x164_write_config(chip);
-@@ -170,17 +188,19 @@ static int gen_74x164_remove(struct spi_
- return 0;
- }
-
-+#ifdef CONFIG_OF
- static const struct of_device_id gen_74x164_dt_ids[] = {
- { .compatible = "fairchild,74hc595" },
- { .compatible = "nxp,74lvc594" },
- {},
- };
- MODULE_DEVICE_TABLE(of, gen_74x164_dt_ids);
-+#endif
-
- static struct spi_driver gen_74x164_driver = {
- .driver = {
- .name = "74x164",
-- .of_match_table = gen_74x164_dt_ids,
-+ .of_match_table = of_match_ptr(gen_74x164_dt_ids),
- },
- .probe = gen_74x164_probe,
- .remove = gen_74x164_remove,
---- /dev/null
-+++ b/include/linux/spi/74x164.h
-@@ -0,0 +1,13 @@
-+#ifndef LINUX_SPI_74X164_H
-+#define LINUX_SPI_74X164_H
-+
-+struct gen_74x164_chip_platform_data {
-+ /* number assigned to the first GPIO */
-+ unsigned base;
-+ /* number of chained registers */
-+ unsigned num_registers;
-+ /* address of a buffer containing initial data */
-+ u8 *init_data;
-+};
-+
-+#endif
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -1154,7 +1154,6 @@ menu "SPI GPIO expanders"
-
- config GPIO_74X164
- tristate "74x164 serial-in/parallel-out 8-bits shift register"
-- depends on OF_GPIO
- help
- Driver for 74x164 compatible serial-in/parallel-out 8-outputs
- shift registers. This driver can be used to provide access
+++ /dev/null
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -1220,4 +1220,9 @@ config GPIO_NXP_74HC153
- Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
- provides a GPIO interface supporting input mode only.
-
-+config GPIO_LATCH
-+ tristate "GPIO latch driver"
-+ help
-+ Say yes here to enable a GPIO latch driver.
-+
- endif
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -56,6 +56,7 @@ obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz
- obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
- obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
- obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o
-+obj-$(CONFIG_GPIO_LATCH) += gpio-latch.o
- obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o
- obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
- obj-$(CONFIG_GPIO_LPC18XX) += gpio-lpc18xx.o
+++ /dev/null
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -102,9 +102,6 @@ static void ath79_spi_enable(struct ath7
- /* save CTRL register */
- sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL);
- sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC);
--
-- /* TODO: setup speed? */
-- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
- }
-
- static void ath79_spi_disable(struct ath79_spi *sp)
-@@ -205,6 +202,38 @@ static u32 ath79_spi_txrx_mode0(struct s
- return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS);
- }
-
-+static bool ath79_spi_flash_read_supported(struct spi_device *spi)
-+{
-+ if (spi->chip_select || gpio_is_valid(spi->cs_gpio))
-+ return false;
-+
-+ return true;
-+}
-+
-+static int ath79_spi_read_flash_data(struct spi_device *spi,
-+ struct spi_flash_read_message *msg)
-+{
-+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
-+
-+ if (msg->addr_width > 3)
-+ return -EOPNOTSUPP;
-+
-+ /* disable GPIO mode */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
-+
-+ memcpy_fromio(msg->buf, sp->base + msg->from, msg->len);
-+
-+ /* enable GPIO mode */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
-+
-+ /* restore IOC register */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
-+
-+ msg->retlen = msg->len;
-+
-+ return 0;
-+}
-+
- static int ath79_spi_probe(struct platform_device *pdev)
- {
- struct spi_master *master;
-@@ -234,6 +263,8 @@ static int ath79_spi_probe(struct platfo
- master->num_chipselect = pdata->num_chipselect;
- master->cs_gpios = pdata->cs_gpios;
- }
-+ master->spi_flash_read = ath79_spi_read_flash_data;
-+ master->flash_read_supported = ath79_spi_flash_read_supported;
-
- sp->bitbang.master = master;
- sp->bitbang.chipselect = ath79_spi_chipselect;
+++ /dev/null
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ath79/mangle-port.h
-@@ -0,0 +1,37 @@
-+/*
-+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h
-+ * Copyright (C) 2003, 2004 Ralf Baechle
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H
-+#define __ASM_MACH_ATH79_MANGLE_PORT_H
-+
-+#ifdef CONFIG_PCI
-+extern unsigned long (ath79_pci_swizzle_b)(unsigned long port);
-+extern unsigned long (ath79_pci_swizzle_w)(unsigned long port);
-+#else
-+#define ath79_pci_swizzle_b(port) (port)
-+#define ath79_pci_swizzle_w(port) (port)
-+#endif
-+
-+#define __swizzle_addr_b(port) ath79_pci_swizzle_b(port)
-+#define __swizzle_addr_w(port) ath79_pci_swizzle_w(port)
-+#define __swizzle_addr_l(port) (port)
-+#define __swizzle_addr_q(port) (port)
-+
-+# define ioswabb(a, x) (x)
-+# define __mem_ioswabb(a, x) (x)
-+# define ioswabw(a, x) (x)
-+# define __mem_ioswabw(a, x) cpu_to_le16(x)
-+# define ioswabl(a, x) (x)
-+# define __mem_ioswabl(a, x) cpu_to_le32(x)
-+# define ioswabq(a, x) (x)
-+# define __mem_ioswabq(a, x) cpu_to_le64(x)
-+
-+#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -13,6 +13,7 @@
- */
-
- #include <linux/init.h>
-+#include <linux/export.h>
- #include <linux/pci.h>
- #include <linux/resource.h>
- #include <linux/platform_device.h>
-@@ -25,6 +26,9 @@ static int (*ath79_pci_plat_dev_init)(st
- static const struct ath79_pci_irq *ath79_pci_irq_map __initdata;
- static unsigned ath79_pci_nr_irqs __initdata;
-
-+static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port);
-+static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port);
-+
- static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
- {
- .slot = 17,
-@@ -212,12 +216,50 @@ ath79_register_pci_ar724x(int id,
- return pdev;
- }
-
-+static inline bool ar71xx_is_pci_addr(unsigned long port)
-+{
-+ unsigned long phys = CPHYSADDR(port);
-+
-+ return (phys >= AR71XX_PCI_MEM_BASE &&
-+ phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE);
-+}
-+
-+static unsigned long ar71xx_pci_swizzle_b(unsigned long port)
-+{
-+ return ar71xx_is_pci_addr(port) ? port ^ 3 : port;
-+}
-+
-+static unsigned long ar71xx_pci_swizzle_w(unsigned long port)
-+{
-+ return ar71xx_is_pci_addr(port) ? port ^ 2 : port;
-+}
-+
-+unsigned long ath79_pci_swizzle_b(unsigned long port)
-+{
-+ if (__ath79_pci_swizzle_b)
-+ return __ath79_pci_swizzle_b(port);
-+
-+ return port;
-+}
-+EXPORT_SYMBOL(ath79_pci_swizzle_b);
-+
-+unsigned long ath79_pci_swizzle_w(unsigned long port)
-+{
-+ if (__ath79_pci_swizzle_w)
-+ return __ath79_pci_swizzle_w(port);
-+
-+ return port;
-+}
-+EXPORT_SYMBOL(ath79_pci_swizzle_w);
-+
- int __init ath79_register_pci(void)
- {
- struct platform_device *pdev = NULL;
-
- if (soc_is_ar71xx()) {
- pdev = ath79_register_pci_ar71xx();
-+ __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b;
-+ __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w;
- } else if (soc_is_ar724x()) {
- pdev = ath79_register_pci_ar724x(-1,
- AR724X_PCI_CFG_BASE,
+++ /dev/null
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -252,6 +252,37 @@ int ehci_reset(struct ehci_hcd *ehci)
- command |= CMD_RESET;
- dbg_cmd (ehci, "reset", command);
- ehci_writel(ehci, command, &ehci->regs->command);
-+
-+ if (ehci->qca_force_host_mode) {
-+ u32 usbmode;
-+
-+ udelay(1000);
-+
-+ usbmode = ehci_readl(ehci, &ehci->regs->usbmode);
-+ usbmode |= USBMODE_CM_HC | (1 << 4);
-+ ehci_writel(ehci, usbmode, &ehci->regs->usbmode);
-+
-+ ehci_dbg(ehci, "forced host mode, usbmode: %08x\n",
-+ ehci_readl(ehci, &ehci->regs->usbmode));
-+ }
-+
-+ if (ehci->qca_force_16bit_ptw) {
-+ u32 port_status;
-+
-+ udelay(1000);
-+
-+ /* enable 16-bit UTMI interface */
-+ port_status = ehci_readl(ehci, &ehci->regs->port_status[0]);
-+ port_status |= BIT(28);
-+ ehci_writel(ehci, port_status, &ehci->regs->port_status[0]);
-+
-+ ehci_dbg(ehci, "16-bit UTMI interface enabled, status: %08x\n",
-+ ehci_readl(ehci, &ehci->regs->port_status[0]));
-+ }
-+
-+ if (ehci->reset_notifier)
-+ ehci->reset_notifier(ehci_to_hcd(ehci));
-+
- ehci->rh_state = EHCI_RH_HALTED;
- ehci->next_statechange = jiffies;
- retval = ehci_handshake(ehci, &ehci->regs->command,
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -231,6 +231,10 @@ struct ehci_hcd { /* one per controlle
- unsigned need_oc_pp_cycle:1; /* MPC834X port power */
- unsigned imx28_write_fix:1; /* For Freescale i.MX28 */
- unsigned ignore_oc:1;
-+ unsigned qca_force_host_mode:1;
-+ unsigned qca_force_16bit_ptw:1; /* force 16 bit UTMI */
-+
-+ void (*reset_notifier)(struct usb_hcd *hcd);
-
- /* required for usb32 quirk */
- #define OHCI_CTRL_HCFS (3 << 6)
---- a/include/linux/usb/ehci_pdriver.h
-+++ b/include/linux/usb/ehci_pdriver.h
-@@ -50,6 +50,8 @@ struct usb_ehci_pdata {
- unsigned reset_on_resume:1;
- unsigned dma_mask_64:1;
- unsigned ignore_oc:1;
-+ unsigned qca_force_host_mode:1;
-+ unsigned qca_force_16bit_ptw:1;
-
- /* Turn on all power and clocks */
- int (*power_on)(struct platform_device *pdev);
-@@ -59,6 +61,7 @@ struct usb_ehci_pdata {
- * turn off everything else */
- void (*power_suspend)(struct platform_device *pdev);
- int (*pre_setup)(struct usb_hcd *hcd);
-+ void (*reset_notifier)(struct platform_device *pdev);
- };
-
- #endif /* __USB_CORE_EHCI_PDRIVER_H */
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -52,6 +52,14 @@ struct ehci_platform_priv {
-
- static const char hcd_name[] = "ehci-platform";
-
-+static void ehci_platform_reset_notifier(struct usb_hcd *hcd)
-+{
-+ struct platform_device *pdev = to_platform_device(hcd->self.controller);
-+ struct usb_ehci_pdata *pdata = pdev->dev.platform_data;
-+
-+ pdata->reset_notifier(pdev);
-+}
-+
- static int ehci_platform_reset(struct usb_hcd *hcd)
- {
- struct platform_device *pdev = to_platform_device(hcd->self.controller);
-@@ -261,6 +269,13 @@ static int ehci_platform_probe(struct pl
- priv->reset_on_resume = true;
- if (pdata->ignore_oc)
- ehci->ignore_oc = 1;
-+ if (pdata->qca_force_host_mode)
-+ ehci->qca_force_host_mode = 1;
-+ if (pdata->qca_force_16bit_ptw)
-+ ehci->qca_force_16bit_ptw = 1;
-+
-+ if (pdata->reset_notifier)
-+ ehci->reset_notifier = ehci_platform_reset_notifier;
-
- #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
- if (ehci->big_endian_mmio) {
+++ /dev/null
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -218,6 +218,7 @@ cflags-$(toolchain-virt) += -DTOOLCHAIN
- #
- libs-$(CONFIG_FW_ARC) += arch/mips/fw/arc/
- libs-$(CONFIG_FW_CFE) += arch/mips/fw/cfe/
-+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/
- libs-$(CONFIG_FW_SNIPROM) += arch/mips/fw/sni/
- libs-y += arch/mips/fw/lib/
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1150,6 +1150,9 @@ config MIPS_MSC
- config MIPS_NILE4
- bool
-
-+config MYLOADER
-+ bool
-+
- config SYNC_R4K
- bool
-
+++ /dev/null
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -15,6 +15,7 @@
- #include <linux/init.h>
- #include <linux/delay.h>
- #include <linux/irq.h>
-+#include <linux/etherdevice.h>
- #include <linux/platform_device.h>
- #include <linux/ath9k_platform.h>
-
-@@ -22,6 +23,7 @@
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include "dev-wmac.h"
-
-+static u8 ath79_wmac_mac[ETH_ALEN];
- static struct ath9k_platform_data ath79_wmac_data;
-
- static struct resource ath79_wmac_resources[] = {
-@@ -161,7 +163,7 @@ static void qca955x_wmac_setup(void)
- ath79_wmac_data.is_clk_25mhz = true;
- }
-
--void __init ath79_register_wmac(u8 *cal_data)
-+void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
- {
- if (soc_is_ar913x())
- ar913x_wmac_setup();
-@@ -178,5 +180,10 @@ void __init ath79_register_wmac(u8 *cal_
- memcpy(ath79_wmac_data.eeprom_data, cal_data,
- sizeof(ath79_wmac_data.eeprom_data));
-
-+ if (mac_addr) {
-+ memcpy(ath79_wmac_mac, mac_addr, sizeof(ath79_wmac_mac));
-+ ath79_wmac_data.macaddr = ath79_wmac_mac;
-+ }
-+
- platform_device_register(&ath79_wmac_device);
- }
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -12,6 +12,6 @@
- #ifndef _ATH79_DEV_WMAC_H
- #define _ATH79_DEV_WMAC_H
-
--void ath79_register_wmac(u8 *cal_data);
-+void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
-
- #endif /* _ATH79_DEV_WMAC_H */
---- a/arch/mips/ath79/mach-db120.c
-+++ b/arch/mips/ath79/mach-db120.c
-@@ -128,7 +128,7 @@ static void __init db120_setup(void)
- ath79_register_spi(&db120_spi_data, db120_spi_info,
- ARRAY_SIZE(db120_spi_info));
- ath79_register_usb();
-- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
-+ ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
- }
-
---- a/arch/mips/ath79/mach-ap121.c
-+++ b/arch/mips/ath79/mach-ap121.c
-@@ -85,7 +85,7 @@ static void __init ap121_setup(void)
- ath79_register_spi(&ap121_spi_data, ap121_spi_info,
- ARRAY_SIZE(ap121_spi_info));
- ath79_register_usb();
-- ath79_register_wmac(cal_data);
-+ ath79_register_wmac(cal_data, NULL);
- }
-
- MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
+++ /dev/null
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -145,6 +145,7 @@ static inline u32 ath79_reset_rr(unsigne
-
- void ath79_device_reset_set(u32 mask);
- void ath79_device_reset_clear(u32 mask);
-+u32 ath79_device_reset_get(u32 mask);
-
- void ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3);
- void ath79_misc_irq_init(void __iomem *regs, int irq,
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -142,3 +142,29 @@ void ath79_device_reset_clear(u32 mask)
- spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
- }
- EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
-+
-+u32 ath79_device_reset_get(u32 mask)
-+{
-+ unsigned long flags;
-+ u32 reg;
-+ u32 ret;
-+
-+ if (soc_is_ar71xx())
-+ reg = AR71XX_RESET_REG_RESET_MODULE;
-+ else if (soc_is_ar724x())
-+ reg = AR724X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_ar913x())
-+ reg = AR913X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_ar933x())
-+ reg = AR933X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_ar934x())
-+ reg = AR934X_RESET_REG_RESET_MODULE;
-+ else
-+ BUG();
-+
-+ spin_lock_irqsave(&ath79_device_reset_lock, flags);
-+ ret = ath79_reset_rr(reg);
-+ spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
-+ return ret;
-+}
-+EXPORT_SYMBOL_GPL(ath79_device_reset_get);
+++ /dev/null
---- a/arch/mips/ath79/common.h
-+++ b/arch/mips/ath79/common.h
-@@ -27,6 +27,7 @@ void ath79_ddr_ctrl_init(void);
- void ath79_gpio_function_enable(u32 mask);
- void ath79_gpio_function_disable(u32 mask);
- void ath79_gpio_function_setup(u32 set, u32 clear);
-+void ath79_gpio_output_select(unsigned gpio, u8 val);
- void ath79_gpio_init(void);
-
- #endif /* __ATH79_COMMON_H */
---- a/arch/mips/ath79/gpio.c
-+++ b/arch/mips/ath79/gpio.c
-@@ -57,3 +57,26 @@ void ath79_gpio_function_disable(u32 mas
- {
- ath79_gpio_function_setup(0, mask);
- }
-+
-+void __init ath79_gpio_output_select(unsigned gpio, u8 val)
-+{
-+ void __iomem *base = ath79_gpio_base;
-+ unsigned int reg;
-+ u32 t, s;
-+
-+ BUG_ON(!soc_is_ar934x());
-+
-+ if (gpio >= AR934X_GPIO_COUNT)
-+ return;
-+
-+ reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4);
-+ s = 8 * (gpio % 4);
-+
-+ t = __raw_readl(base + reg);
-+ t &= ~(0xff << s);
-+ t |= val << s;
-+ __raw_writel(t, base + reg);
-+
-+ /* flush write */
-+ (void) __raw_readl(base + reg);
-+}
+++ /dev/null
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -22,10 +22,39 @@
-
- #include "common.h"
-
-+static char ath79_cmdline_buf[COMMAND_LINE_SIZE] __initdata;
-+
-+static void __init ath79_prom_append_cmdline(const char *name,
-+ const char *value)
-+{
-+ snprintf(ath79_cmdline_buf, sizeof(ath79_cmdline_buf),
-+ " %s=%s", name, value);
-+ strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline));
-+}
-+
- void __init prom_init(void)
- {
-+ const char *env;
-+
- fw_init_cmdline();
-
-+ env = fw_getenv("ethaddr");
-+ if (env)
-+ ath79_prom_append_cmdline("ethaddr", env);
-+
-+ env = fw_getenv("board");
-+ if (env) {
-+ /* Workaround for buggy bootloaders */
-+ if (strcmp(env, "RouterStation") == 0 ||
-+ strcmp(env, "Ubiquiti AR71xx-based board") == 0)
-+ env = "UBNT-RS";
-+
-+ if (strcmp(env, "RouterStation PRO") == 0)
-+ env = "UBNT-RSPRO";
-+
-+ ath79_prom_append_cmdline("board", env);
-+ }
-+
- #ifdef CONFIG_BLK_DEV_INITRD
- /* Read the initrd address from the firmware environment */
- initrd_start = fw_getenvl("initrd_start");
+++ /dev/null
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -19,6 +19,7 @@
- #include <asm/bootinfo.h>
- #include <asm/addrspace.h>
- #include <asm/fw/fw.h>
-+#include <asm/fw/myloader/myloader.h>
-
- #include "common.h"
-
-@@ -32,10 +33,44 @@ static void __init ath79_prom_append_cmd
- strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline));
- }
-
-+static int __init ath79_prom_init_myloader(void)
-+{
-+ struct myloader_info *mylo;
-+ char mac_buf[32];
-+ unsigned char *mac;
-+
-+ mylo = myloader_get_info();
-+ if (!mylo)
-+ return 0;
-+
-+ switch (mylo->did) {
-+ case DEVID_COMPEX_WP543:
-+ ath79_prom_append_cmdline("board", "WP543");
-+ break;
-+ case DEVID_COMPEX_WPE72:
-+ ath79_prom_append_cmdline("board", "WPE72");
-+ break;
-+ default:
-+ pr_warn("prom: unknown device id: %x\n", mylo->did);
-+ return 0;
-+ }
-+
-+ mac = mylo->macs[0];
-+ snprintf(mac_buf, sizeof(mac_buf), "%02x:%02x:%02x:%02x:%02x:%02x",
-+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-+
-+ ath79_prom_append_cmdline("ethaddr", mac_buf);
-+
-+ return 1;
-+}
-+
- void __init prom_init(void)
- {
- const char *env;
-
-+ if (ath79_prom_init_myloader())
-+ return;
-+
- fw_init_cmdline();
-
- env = fw_getenv("ethaddr");
+++ /dev/null
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -33,6 +33,41 @@ static void __init ath79_prom_append_cmd
- strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline));
- }
-
-+#ifdef CONFIG_IMAGE_CMDLINE_HACK
-+extern char __image_cmdline[];
-+
-+static int __init ath79_use_image_cmdline(void)
-+{
-+ char *p = __image_cmdline;
-+ int replace = 0;
-+
-+ if (*p == '-') {
-+ replace = 1;
-+ p++;
-+ }
-+
-+ if (*p == '\0')
-+ return 0;
-+
-+ if (replace) {
-+ strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline));
-+ } else {
-+ strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
-+ strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
-+ }
-+
-+ /* Validate and setup environment pointer */
-+ if (fw_arg2 < CKSEG0)
-+ _fw_envp = NULL;
-+ else
-+ _fw_envp = (int *)fw_arg2;
-+
-+ return 1;
-+}
-+#else
-+static inline int ath79_use_image_cmdline(void) { return 0; }
-+#endif
-+
- static int __init ath79_prom_init_myloader(void)
- {
- struct myloader_info *mylo;
-@@ -61,6 +96,8 @@ static int __init ath79_prom_init_myload
-
- ath79_prom_append_cmdline("ethaddr", mac_buf);
-
-+ ath79_use_image_cmdline();
-+
- return 1;
- }
-
-@@ -71,7 +108,8 @@ void __init prom_init(void)
- if (ath79_prom_init_myloader())
- return;
-
-- fw_init_cmdline();
-+ if (!ath79_use_image_cmdline())
-+ fw_init_cmdline();
-
- env = fw_getenv("ethaddr");
- if (env)
---- a/arch/mips/fw/lib/cmdline.c
-+++ b/arch/mips/fw/lib/cmdline.c
-@@ -35,6 +35,7 @@ void __init fw_init_cmdline(void)
- else
- _fw_envp = (int *)fw_arg2;
-
-+ arcs_cmdline[0] = '\0';
- for (i = 1; i < fw_argc; i++) {
- strlcat(arcs_cmdline, fw_argv(i), COMMAND_LINE_SIZE);
- if (i < (fw_argc - 1))
+++ /dev/null
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -283,6 +283,8 @@ void __init plat_time_init(void)
- mips_hpt_frequency = cpu_clk_rate / 2;
- }
-
-+__setup("board=", mips_machtype_setup);
-+
- static int __init ath79_setup(void)
- {
- if (mips_machtype == ATH79_MACH_GENERIC_OF)
+++ /dev/null
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -24,7 +24,10 @@
- #include "dev-wmac.h"
-
- static u8 ath79_wmac_mac[ETH_ALEN];
--static struct ath9k_platform_data ath79_wmac_data;
-+
-+static struct ath9k_platform_data ath79_wmac_data = {
-+ .led_pin = -1,
-+};
-
- static struct resource ath79_wmac_resources[] = {
- {
+++ /dev/null
---- a/arch/mips/ath79/dev-common.c
-+++ b/arch/mips/ath79/dev-common.c
-@@ -81,6 +81,15 @@ void __init ath79_register_uart(void)
-
- uart_clk_rate = ath79_get_sys_clk_rate("uart");
-
-+ if (soc_is_ar71xx())
-+ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_UART_EN);
-+ else if (soc_is_ar724x())
-+ ath79_gpio_function_enable(AR724X_GPIO_FUNC_UART_EN);
-+ else if (soc_is_ar913x())
-+ ath79_gpio_function_enable(AR913X_GPIO_FUNC_UART_EN);
-+ else if (soc_is_ar933x())
-+ ath79_gpio_function_enable(AR933X_GPIO_FUNC_UART_EN);
-+
- if (soc_is_ar71xx() ||
- soc_is_ar724x() ||
- soc_is_ar913x() ||
+++ /dev/null
---- a/arch/mips/ath79/early_printk.c
-+++ b/arch/mips/ath79/early_printk.c
-@@ -58,6 +58,46 @@ static void prom_putchar_dummy(unsigned
- /* nothing to do */
- }
-
-+static void prom_enable_uart(u32 id)
-+{
-+ void __iomem *gpio_base;
-+ u32 uart_en;
-+ u32 t;
-+
-+ switch (id) {
-+ case REV_ID_MAJOR_AR71XX:
-+ uart_en = AR71XX_GPIO_FUNC_UART_EN;
-+ break;
-+
-+ case REV_ID_MAJOR_AR7240:
-+ case REV_ID_MAJOR_AR7241:
-+ case REV_ID_MAJOR_AR7242:
-+ uart_en = AR724X_GPIO_FUNC_UART_EN;
-+ break;
-+
-+ case REV_ID_MAJOR_AR913X:
-+ uart_en = AR913X_GPIO_FUNC_UART_EN;
-+ break;
-+
-+ case REV_ID_MAJOR_AR9330:
-+ case REV_ID_MAJOR_AR9331:
-+ uart_en = AR933X_GPIO_FUNC_UART_EN;
-+ break;
-+
-+ case REV_ID_MAJOR_AR9341:
-+ case REV_ID_MAJOR_AR9342:
-+ case REV_ID_MAJOR_AR9344:
-+ /* TODO */
-+ default:
-+ return;
-+ }
-+
-+ gpio_base = (void __iomem *)(KSEG1ADDR(AR71XX_GPIO_BASE));
-+ t = __raw_readl(gpio_base + AR71XX_GPIO_REG_FUNC);
-+ t |= uart_en;
-+ __raw_writel(t, gpio_base + AR71XX_GPIO_REG_FUNC);
-+}
-+
- static void prom_putchar_init(void)
- {
- void __iomem *base;
-@@ -88,8 +128,10 @@ static void prom_putchar_init(void)
-
- default:
- _prom_putchar = prom_putchar_dummy;
-- break;
-+ return;
- }
-+
-+ prom_enable_uart(id);
- }
-
- void prom_putchar(unsigned char ch)
+++ /dev/null
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -190,3 +190,9 @@ void __init ath79_register_wmac(u8 *cal_
-
- platform_device_register(&ath79_wmac_device);
- }
-+
-+void __init ath79_register_wmac_simple(void)
-+{
-+ ath79_register_wmac(NULL, NULL);
-+ ath79_wmac_data.eeprom_name = "soc_wmac.eeprom";
-+}
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -13,5 +13,6 @@
- #define _ATH79_DEV_WMAC_H
-
- void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
-+void ath79_register_wmac_simple(void);
-
- #endif /* _ATH79_DEV_WMAC_H */
+++ /dev/null
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -166,6 +166,149 @@ static void qca955x_wmac_setup(void)
- ath79_wmac_data.is_clk_25mhz = true;
- }
-
-+#define AR93XX_WMAC_SIZE \
-+ (soc_is_ar934x() ? AR934X_WMAC_SIZE : AR933X_WMAC_SIZE)
-+#define AR93XX_WMAC_BASE \
-+ (soc_is_ar934x() ? AR934X_WMAC_BASE : AR933X_WMAC_BASE)
-+
-+#define AR93XX_OTP_BASE \
-+ (soc_is_ar934x() ? AR934X_OTP_BASE : AR9300_OTP_BASE)
-+#define AR93XX_OTP_STATUS \
-+ (soc_is_ar934x() ? AR934X_OTP_STATUS : AR9300_OTP_STATUS)
-+#define AR93XX_OTP_READ_DATA \
-+ (soc_is_ar934x() ? AR934X_OTP_READ_DATA : AR9300_OTP_READ_DATA)
-+
-+static bool __init
-+ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data)
-+{
-+ int timeout = 1000;
-+ u32 val;
-+
-+ __raw_readl(base + AR93XX_OTP_BASE + (4 * addr));
-+ while (timeout--) {
-+ val = __raw_readl(base + AR93XX_OTP_STATUS);
-+ if ((val & AR9300_OTP_STATUS_TYPE) == AR9300_OTP_STATUS_VALID)
-+ break;
-+
-+ udelay(10);
-+ }
-+
-+ if (!timeout)
-+ return false;
-+
-+ *data = __raw_readl(base + AR93XX_OTP_READ_DATA);
-+ return true;
-+}
-+
-+static bool __init
-+ar93xx_wmac_otp_read(void __iomem *base, int addr, u8 *dest, int len)
-+{
-+ u32 data;
-+ int i;
-+
-+ for (i = 0; i < len; i++) {
-+ int offset = 8 * ((addr - i) % 4);
-+
-+ if (!ar93xx_wmac_otp_read_word(base, (addr - i) / 4, &data))
-+ return false;
-+
-+ dest[i] = (data >> offset) & 0xff;
-+ }
-+
-+ return true;
-+}
-+
-+static bool __init
-+ar93xx_wmac_otp_uncompress(void __iomem *base, int addr, int len, u8 *dest,
-+ int dest_start, int dest_len)
-+{
-+ int dest_bytes = 0;
-+ int offset = 0;
-+ int end = addr - len;
-+ u8 hdr[2];
-+
-+ while (addr > end) {
-+ if (!ar93xx_wmac_otp_read(base, addr, hdr, 2))
-+ return false;
-+
-+ addr -= 2;
-+ offset += hdr[0];
-+
-+ if (offset <= dest_start + dest_len &&
-+ offset + len >= dest_start) {
-+ int data_offset = 0;
-+ int dest_offset = 0;
-+ int copy_len;
-+
-+ if (offset < dest_start)
-+ data_offset = dest_start - offset;
-+ else
-+ dest_offset = offset - dest_start;
-+
-+ copy_len = len - data_offset;
-+ if (copy_len > dest_len - dest_offset)
-+ copy_len = dest_len - dest_offset;
-+
-+ ar93xx_wmac_otp_read(base, addr - data_offset,
-+ dest + dest_offset,
-+ copy_len);
-+
-+ dest_bytes += copy_len;
-+ }
-+ addr -= hdr[1];
-+ }
-+ return !!dest_bytes;
-+}
-+
-+bool __init ar93xx_wmac_read_mac_address(u8 *dest)
-+{
-+ void __iomem *base;
-+ bool ret = false;
-+ int addr = 0x1ff;
-+ unsigned int len;
-+ u32 hdr_u32;
-+ u8 *hdr = (u8 *) &hdr_u32;
-+ u8 mac[6] = { 0x00, 0x02, 0x03, 0x04, 0x05, 0x06 };
-+ int mac_start = 2, mac_end = 8;
-+
-+ BUG_ON(!soc_is_ar933x() && !soc_is_ar934x());
-+ base = ioremap_nocache(AR93XX_WMAC_BASE, AR93XX_WMAC_SIZE);
-+ while (addr > sizeof(hdr_u32)) {
-+ if (!ar93xx_wmac_otp_read(base, addr, hdr, sizeof(hdr_u32)))
-+ break;
-+
-+ if (hdr_u32 == 0 || hdr_u32 == ~0)
-+ break;
-+
-+ len = (hdr[1] << 4) | (hdr[2] >> 4);
-+ addr -= 4;
-+
-+ switch (hdr[0] >> 5) {
-+ case 0:
-+ if (len < mac_end)
-+ break;
-+
-+ ar93xx_wmac_otp_read(base, addr - mac_start, mac, 6);
-+ ret = true;
-+ break;
-+ case 3:
-+ ret |= ar93xx_wmac_otp_uncompress(base, addr, len, mac,
-+ mac_start, 6);
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ addr -= len + 2;
-+ }
-+
-+ iounmap(base);
-+ if (ret)
-+ memcpy(dest, mac, 6);
-+
-+ return ret;
-+}
-+
- void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
- {
- if (soc_is_ar913x())
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -14,5 +14,6 @@
-
- void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
- void ath79_register_wmac_simple(void);
-+bool ar93xx_wmac_read_mac_address(u8 *dest);
-
- #endif /* _ATH79_DEV_WMAC_H */
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -112,6 +112,14 @@
- #define QCA955X_EHCI1_BASE 0x1b400000
- #define QCA955X_EHCI_SIZE 0x1000
-
-+#define AR9300_OTP_BASE 0x14000
-+#define AR9300_OTP_STATUS 0x15f18
-+#define AR9300_OTP_STATUS_TYPE 0x7
-+#define AR9300_OTP_STATUS_VALID 0x4
-+#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2
-+#define AR9300_OTP_STATUS_SM_BUSY 0x1
-+#define AR9300_OTP_READ_DATA 0x15f1c
-+
- /*
- * DDR_CTRL block
- */
-@@ -149,6 +157,13 @@
- #define AR934X_DDR_REG_FLUSH_PCIE 0xa8
- #define AR934X_DDR_REG_FLUSH_WMAC 0xac
-
-+#define AR934X_OTP_BASE 0x30000
-+#define AR934X_OTP_STATUS 0x31018
-+#define AR934X_OTP_READ_DATA 0x3101c
-+#define AR934X_OTP_INTF2_ADDRESS 0x31008
-+#define AR934X_OTP_INTF3_ADDRESS 0x3100c
-+#define AR934X_OTP_PGENB_SETUP_HOLD_TIME_ADDRESS 0x31034
-+
- /*
- * PLL block
- */
+++ /dev/null
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -309,6 +309,16 @@ bool __init ar93xx_wmac_read_mac_address
- return ret;
- }
-
-+void __init ath79_wmac_disable_2ghz(void)
-+{
-+ ath79_wmac_data.disable_2ghz = true;
-+}
-+
-+void __init ath79_wmac_disable_5ghz(void)
-+{
-+ ath79_wmac_data.disable_5ghz = true;
-+}
-+
- void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
- {
- if (soc_is_ar913x())
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -14,6 +14,9 @@
-
- void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
- void ath79_register_wmac_simple(void);
-+void ath79_wmac_disable_2ghz(void);
-+void ath79_wmac_disable_5ghz(void);
-+
- bool ar93xx_wmac_read_mac_address(u8 *dest);
-
- #endif /* _ATH79_DEV_WMAC_H */
+++ /dev/null
---- a/arch/mips/ath79/dev-usb.c
-+++ b/arch/mips/ath79/dev-usb.c
-@@ -37,6 +37,8 @@ static struct usb_ehci_pdata ath79_ehci_
- static struct usb_ehci_pdata ath79_ehci_pdata_v2 = {
- .caps_offset = 0x100,
- .has_tt = 1,
-+ .qca_force_host_mode = 1,
-+ .qca_force_16bit_ptw = 1,
- };
-
- static void __init ath79_usb_register(const char *name, int id,
-@@ -159,6 +161,9 @@ static void __init ar913x_usb_setup(void
- ath79_device_reset_clear(AR913X_RESET_USB_PHY);
- mdelay(10);
-
-+ ath79_ehci_pdata_v2.qca_force_host_mode = 0;
-+ ath79_ehci_pdata_v2.qca_force_16bit_ptw = 0;
-+
- ath79_usb_register("ehci-platform", -1,
- AR913X_EHCI_BASE, AR913X_EHCI_SIZE,
- ATH79_CPU_IRQ(3),
-@@ -182,14 +187,34 @@ static void __init ar933x_usb_setup(void
- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
- }
-
--static void __init ar934x_usb_setup(void)
-+static void enable_tx_tx_idp_violation_fix(unsigned base)
- {
-- u32 bootstrap;
-+ void __iomem *phy_reg;
-+ u32 t;
-+
-+ phy_reg = ioremap(base, 4);
-+ if (!phy_reg)
-+ return;
-+
-+ t = ioread32(phy_reg);
-+ t &= ~0xff;
-+ t |= 0x58;
-+ iowrite32(t, phy_reg);
-+
-+ iounmap(phy_reg);
-+}
-
-- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
-- if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
-+static void ar934x_usb_reset_notifier(struct platform_device *pdev)
-+{
-+ if (pdev->id != -1)
- return;
-
-+ enable_tx_tx_idp_violation_fix(0x18116c94);
-+ dev_info(&pdev->dev, "TX-TX IDP fix enabled\n");
-+}
-+
-+static void __init ar934x_usb_setup(void)
-+{
- ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE);
- udelay(1000);
-
-@@ -202,14 +227,40 @@ static void __init ar934x_usb_setup(void
- ath79_device_reset_clear(AR934X_RESET_USB_HOST);
- udelay(1000);
-
-+ if (ath79_soc_rev >= 3)
-+ ath79_ehci_pdata_v2.reset_notifier = ar934x_usb_reset_notifier;
-+
- ath79_usb_register("ehci-platform", -1,
- AR934X_EHCI_BASE, AR934X_EHCI_SIZE,
- ATH79_CPU_IRQ(3),
- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
- }
-
-+static void qca955x_usb_reset_notifier(struct platform_device *pdev)
-+{
-+ u32 base;
-+
-+ switch (pdev->id) {
-+ case 0:
-+ base = 0x18116c94;
-+ break;
-+
-+ case 1:
-+ base = 0x18116e54;
-+ break;
-+
-+ default:
-+ return;
-+ }
-+
-+ enable_tx_tx_idp_violation_fix(base);
-+ dev_info(&pdev->dev, "TX-TX IDP fix enabled\n");
-+}
-+
- static void __init qca955x_usb_setup(void)
- {
-+ ath79_ehci_pdata_v2.reset_notifier = qca955x_usb_reset_notifier;
-+
- ath79_usb_register("ehci-platform", 0,
- QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE,
- ATH79_IP3_IRQ(0),
+++ /dev/null
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -20,6 +20,10 @@
- #include <linux/bitops.h>
-
- #define AR71XX_APB_BASE 0x18000000
-+#define AR71XX_GE0_BASE 0x19000000
-+#define AR71XX_GE0_SIZE 0x10000
-+#define AR71XX_GE1_BASE 0x1a000000
-+#define AR71XX_GE1_SIZE 0x10000
- #define AR71XX_EHCI_BASE 0x1b000000
- #define AR71XX_EHCI_SIZE 0x1000
- #define AR71XX_OHCI_BASE 0x1c000000
-@@ -39,6 +43,8 @@
- #define AR71XX_PLL_SIZE 0x100
- #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000)
- #define AR71XX_RESET_SIZE 0x100
-+#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define AR71XX_MII_SIZE 0x100
-
- #define AR71XX_PCI_MEM_BASE 0x10000000
- #define AR71XX_PCI_MEM_SIZE 0x07000000
-@@ -81,15 +87,21 @@
-
- #define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000)
- #define AR933X_UART_SIZE 0x14
-+#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define AR933X_GMAC_SIZE 0x04
- #define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
- #define AR933X_WMAC_SIZE 0x20000
- #define AR933X_EHCI_BASE 0x1b000000
- #define AR933X_EHCI_SIZE 0x1000
-
-+#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define AR934X_GMAC_SIZE 0x14
- #define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
- #define AR934X_WMAC_SIZE 0x20000
- #define AR934X_EHCI_BASE 0x1b000000
- #define AR934X_EHCI_SIZE 0x200
-+#define AR934X_NFC_BASE 0x1b000200
-+#define AR934X_NFC_SIZE 0xb8
- #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
- #define AR934X_SRIF_SIZE 0x1000
-
-@@ -106,11 +118,15 @@
- #define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000)
- #define QCA955X_PCI_CTRL_SIZE 0x100
-
-+#define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define QCA955X_GMAC_SIZE 0x40
- #define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
- #define QCA955X_WMAC_SIZE 0x20000
- #define QCA955X_EHCI0_BASE 0x1b000000
- #define QCA955X_EHCI1_BASE 0x1b400000
- #define QCA955X_EHCI_SIZE 0x1000
-+#define QCA955X_NFC_BASE 0x1b800200
-+#define QCA955X_NFC_SIZE 0xb8
-
- #define AR9300_OTP_BASE 0x14000
- #define AR9300_OTP_STATUS 0x15f18
-@@ -181,6 +197,9 @@
- #define AR71XX_AHB_DIV_SHIFT 20
- #define AR71XX_AHB_DIV_MASK 0x7
-
-+#define AR71XX_ETH0_PLL_SHIFT 17
-+#define AR71XX_ETH1_PLL_SHIFT 19
-+
- #define AR724X_PLL_REG_CPU_CONFIG 0x00
- #define AR724X_PLL_REG_PCIE_CONFIG 0x10
-
-@@ -196,6 +215,8 @@
- #define AR724X_DDR_DIV_SHIFT 22
- #define AR724X_DDR_DIV_MASK 0x3
-
-+#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c
-+
- #define AR913X_PLL_REG_CPU_CONFIG 0x00
- #define AR913X_PLL_REG_ETH_CONFIG 0x04
- #define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14
-@@ -208,6 +229,9 @@
- #define AR913X_AHB_DIV_SHIFT 19
- #define AR913X_AHB_DIV_MASK 0x1
-
-+#define AR913X_ETH0_PLL_SHIFT 20
-+#define AR913X_ETH1_PLL_SHIFT 22
-+
- #define AR933X_PLL_CPU_CONFIG_REG 0x00
- #define AR933X_PLL_CLOCK_CTRL_REG 0x08
-
-@@ -229,6 +253,8 @@
- #define AR934X_PLL_CPU_CONFIG_REG 0x00
- #define AR934X_PLL_DDR_CONFIG_REG 0x04
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08
-+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG 0x24
-+#define AR934X_PLL_ETH_XMII_CONTROL_REG 0x2c
-
- #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
- #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-@@ -261,9 +287,13 @@
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-
-+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6)
-+
- #define QCA955X_PLL_CPU_CONFIG_REG 0x00
- #define QCA955X_PLL_DDR_CONFIG_REG 0x04
- #define QCA955X_PLL_CLK_CTRL_REG 0x08
-+#define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28
-+#define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48
-
- #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
- #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-@@ -388,16 +418,83 @@
- #define AR913X_RESET_USB_HOST BIT(5)
- #define AR913X_RESET_USB_PHY BIT(4)
-
-+#define AR933X_RESET_GE1_MDIO BIT(23)
-+#define AR933X_RESET_GE0_MDIO BIT(22)
-+#define AR933X_RESET_GE1_MAC BIT(13)
- #define AR933X_RESET_WMAC BIT(11)
-+#define AR933X_RESET_GE0_MAC BIT(9)
- #define AR933X_RESET_USB_HOST BIT(5)
- #define AR933X_RESET_USB_PHY BIT(4)
- #define AR933X_RESET_USBSUS_OVERRIDE BIT(3)
-
-+#define AR934X_RESET_HOST BIT(31)
-+#define AR934X_RESET_SLIC BIT(30)
-+#define AR934X_RESET_HDMA BIT(29)
-+#define AR934X_RESET_EXTERNAL BIT(28)
-+#define AR934X_RESET_RTC BIT(27)
-+#define AR934X_RESET_PCIE_EP_INT BIT(26)
-+#define AR934X_RESET_CHKSUM_ACC BIT(25)
-+#define AR934X_RESET_FULL_CHIP BIT(24)
-+#define AR934X_RESET_GE1_MDIO BIT(23)
-+#define AR934X_RESET_GE0_MDIO BIT(22)
-+#define AR934X_RESET_CPU_NMI BIT(21)
-+#define AR934X_RESET_CPU_COLD BIT(20)
-+#define AR934X_RESET_HOST_RESET_INT BIT(19)
-+#define AR934X_RESET_PCIE_EP BIT(18)
-+#define AR934X_RESET_UART1 BIT(17)
-+#define AR934X_RESET_DDR BIT(16)
-+#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
-+#define AR934X_RESET_NANDF BIT(14)
-+#define AR934X_RESET_GE1_MAC BIT(13)
-+#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12)
- #define AR934X_RESET_USB_PHY_ANALOG BIT(11)
-+#define AR934X_RESET_HOST_DMA_INT BIT(10)
-+#define AR934X_RESET_GE0_MAC BIT(9)
-+#define AR934X_RESET_ETH_SWITCH BIT(8)
-+#define AR934X_RESET_PCIE_PHY BIT(7)
-+#define AR934X_RESET_PCIE BIT(6)
- #define AR934X_RESET_USB_HOST BIT(5)
- #define AR934X_RESET_USB_PHY BIT(4)
- #define AR934X_RESET_USBSUS_OVERRIDE BIT(3)
-+#define AR934X_RESET_LUT BIT(2)
-+#define AR934X_RESET_MBOX BIT(1)
-+#define AR934X_RESET_I2S BIT(0)
-+
-+#define QCA955X_RESET_HOST BIT(31)
-+#define QCA955X_RESET_SLIC BIT(30)
-+#define QCA955X_RESET_HDMA BIT(29)
-+#define QCA955X_RESET_EXTERNAL BIT(28)
-+#define QCA955X_RESET_RTC BIT(27)
-+#define QCA955X_RESET_PCIE_EP_INT BIT(26)
-+#define QCA955X_RESET_CHKSUM_ACC BIT(25)
-+#define QCA955X_RESET_FULL_CHIP BIT(24)
-+#define QCA955X_RESET_GE1_MDIO BIT(23)
-+#define QCA955X_RESET_GE0_MDIO BIT(22)
-+#define QCA955X_RESET_CPU_NMI BIT(21)
-+#define QCA955X_RESET_CPU_COLD BIT(20)
-+#define QCA955X_RESET_HOST_RESET_INT BIT(19)
-+#define QCA955X_RESET_PCIE_EP BIT(18)
-+#define QCA955X_RESET_UART1 BIT(17)
-+#define QCA955X_RESET_DDR BIT(16)
-+#define QCA955X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
-+#define QCA955X_RESET_NANDF BIT(14)
-+#define QCA955X_RESET_GE1_MAC BIT(13)
-+#define QCA955X_RESET_SGMII_ANALOG BIT(12)
-+#define QCA955X_RESET_USB_PHY_ANALOG BIT(11)
-+#define QCA955X_RESET_HOST_DMA_INT BIT(10)
-+#define QCA955X_RESET_GE0_MAC BIT(9)
-+#define QCA955X_RESET_SGMII BIT(8)
-+#define QCA955X_RESET_PCIE_PHY BIT(7)
-+#define QCA955X_RESET_PCIE BIT(6)
-+#define QCA955X_RESET_USB_HOST BIT(5)
-+#define QCA955X_RESET_USB_PHY BIT(4)
-+#define QCA955X_RESET_USBSUS_OVERRIDE BIT(3)
-+#define QCA955X_RESET_LUT BIT(2)
-+#define QCA955X_RESET_MBOX BIT(1)
-+#define QCA955X_RESET_I2S BIT(0)
-
-+#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18)
-+#define AR933X_BOOTSTRAP_EEPBUSY BIT(4)
- #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
-
- #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
-@@ -539,8 +636,22 @@
- #define AR71XX_GPIO_REG_INT_ENABLE 0x24
- #define AR71XX_GPIO_REG_FUNC 0x28
-
-+#define AR934X_GPIO_REG_OUT_FUNC0 0x2c
-+#define AR934X_GPIO_REG_OUT_FUNC1 0x30
-+#define AR934X_GPIO_REG_OUT_FUNC2 0x34
-+#define AR934X_GPIO_REG_OUT_FUNC3 0x38
-+#define AR934X_GPIO_REG_OUT_FUNC4 0x3c
-+#define AR934X_GPIO_REG_OUT_FUNC5 0x40
- #define AR934X_GPIO_REG_FUNC 0x6c
-
-+#define QCA955X_GPIO_REG_OUT_FUNC0 0x2c
-+#define QCA955X_GPIO_REG_OUT_FUNC1 0x30
-+#define QCA955X_GPIO_REG_OUT_FUNC2 0x34
-+#define QCA955X_GPIO_REG_OUT_FUNC3 0x38
-+#define QCA955X_GPIO_REG_OUT_FUNC4 0x3c
-+#define QCA955X_GPIO_REG_OUT_FUNC5 0x40
-+#define QCA955X_GPIO_REG_FUNC 0x6c
-+
- #define AR71XX_GPIO_COUNT 16
- #define AR7240_GPIO_COUNT 18
- #define AR7241_GPIO_COUNT 20
-@@ -570,4 +681,235 @@
- #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13
- #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7
-
-+#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17)
-+#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16)
-+#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13)
-+#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12)
-+#define AR71XX_GPIO_FUNC_UART_EN BIT(8)
-+#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4)
-+#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0)
-+
-+#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19)
-+#define AR724X_GPIO_FUNC_SPI_EN BIT(18)
-+#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14)
-+#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13)
-+#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12)
-+#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11)
-+#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10)
-+#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9)
-+#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3)
-+#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2)
-+#define AR724X_GPIO_FUNC_UART_EN BIT(1)
-+#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0)
-+
-+#define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22)
-+#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21)
-+#define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20)
-+#define AR913X_GPIO_FUNC_I2S_MCKEN BIT(19)
-+#define AR913X_GPIO_FUNC_I2S1_EN BIT(18)
-+#define AR913X_GPIO_FUNC_I2S0_EN BIT(17)
-+#define AR913X_GPIO_FUNC_SLIC_EN BIT(16)
-+#define AR913X_GPIO_FUNC_UART_RTSCTS_EN BIT(9)
-+#define AR913X_GPIO_FUNC_UART_EN BIT(8)
-+#define AR913X_GPIO_FUNC_USB_CLK_EN BIT(4)
-+
-+#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31)
-+#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30)
-+#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29)
-+#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27)
-+#define AR933X_GPIO_FUNC_I2SO_EN BIT(26)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23)
-+#define AR933X_GPIO_FUNC_SPI_EN BIT(18)
-+#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14)
-+#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3)
-+#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2)
-+#define AR933X_GPIO_FUNC_UART_EN BIT(1)
-+#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0)
-+
-+#define AR934X_GPIO_FUNC_CLK_OBS7_EN BIT(9)
-+#define AR934X_GPIO_FUNC_CLK_OBS6_EN BIT(8)
-+#define AR934X_GPIO_FUNC_CLK_OBS5_EN BIT(7)
-+#define AR934X_GPIO_FUNC_CLK_OBS4_EN BIT(6)
-+#define AR934X_GPIO_FUNC_CLK_OBS3_EN BIT(5)
-+#define AR934X_GPIO_FUNC_CLK_OBS2_EN BIT(4)
-+#define AR934X_GPIO_FUNC_CLK_OBS1_EN BIT(3)
-+#define AR934X_GPIO_FUNC_CLK_OBS0_EN BIT(2)
-+#define AR934X_GPIO_FUNC_JTAG_DISABLE BIT(1)
-+
-+#define AR934X_GPIO_OUT_GPIO 0
-+#define AR934X_GPIO_OUT_SPI_CS1 7
-+#define AR934X_GPIO_OUT_LED_LINK0 41
-+#define AR934X_GPIO_OUT_LED_LINK1 42
-+#define AR934X_GPIO_OUT_LED_LINK2 43
-+#define AR934X_GPIO_OUT_LED_LINK3 44
-+#define AR934X_GPIO_OUT_LED_LINK4 45
-+#define AR934X_GPIO_OUT_EXT_LNA0 46
-+#define AR934X_GPIO_OUT_EXT_LNA1 47
-+
-+#define QCA955X_GPIO_FUNC_CLK_OBS7_EN BIT(9)
-+#define QCA955X_GPIO_FUNC_CLK_OBS6_EN BIT(8)
-+#define QCA955X_GPIO_FUNC_CLK_OBS5_EN BIT(7)
-+#define QCA955X_GPIO_FUNC_CLK_OBS4_EN BIT(6)
-+#define QCA955X_GPIO_FUNC_CLK_OBS3_EN BIT(5)
-+#define QCA955X_GPIO_FUNC_CLK_OBS2_EN BIT(4)
-+#define QCA955X_GPIO_FUNC_CLK_OBS1_EN BIT(3)
-+#define QCA955X_GPIO_FUNC_JTAG_DISABLE BIT(1)
-+
-+#define QCA955X_GPIO_OUT_GPIO 0
-+#define QCA955X_MII_EXT_MDI 1
-+#define QCA955X_SLIC_DATA_OUT 3
-+#define QCA955X_SLIC_PCM_FS 4
-+#define QCA955X_SLIC_PCM_CLK 5
-+#define QCA955X_SPI_CLK 8
-+#define QCA955X_SPI_CS_0 9
-+#define QCA955X_SPI_CS_1 10
-+#define QCA955X_SPI_CS_2 11
-+#define QCA955X_SPI_MISO 12
-+#define QCA955X_I2S_CLK 13
-+#define QCA955X_I2S_WS 14
-+#define QCA955X_I2S_SD 15
-+#define QCA955X_I2S_MCK 16
-+#define QCA955X_SPDIF_OUT 17
-+#define QCA955X_UART1_TD 18
-+#define QCA955X_UART1_RTS 19
-+#define QCA955X_UART1_RD 20
-+#define QCA955X_UART1_CTS 21
-+#define QCA955X_UART0_SOUT 22
-+#define QCA955X_SPDIF2_OUT 23
-+#define QCA955X_LED_SGMII_SPEED0 24
-+#define QCA955X_LED_SGMII_SPEED1 25
-+#define QCA955X_LED_SGMII_DUPLEX 26
-+#define QCA955X_LED_SGMII_LINK_UP 27
-+#define QCA955X_SGMII_SPEED0_INVERT 28
-+#define QCA955X_SGMII_SPEED1_INVERT 29
-+#define QCA955X_SGMII_DUPLEX_INVERT 30
-+#define QCA955X_SGMII_LINK_UP_INVERT 31
-+#define QCA955X_GE1_MII_MDO 32
-+#define QCA955X_GE1_MII_MDC 33
-+#define QCA955X_SWCOM2 38
-+#define QCA955X_SWCOM3 39
-+#define QCA955X_MAC2_GPIO 40
-+#define QCA955X_MAC3_GPIO 41
-+#define QCA955X_ATT_LED 42
-+#define QCA955X_PWR_LED 43
-+#define QCA955X_TX_FRAME 44
-+#define QCA955X_RX_CLEAR_EXTERNAL 45
-+#define QCA955X_LED_NETWORK_EN 46
-+#define QCA955X_LED_POWER_EN 47
-+#define QCA955X_WMAC_GLUE_WOW 68
-+#define QCA955X_RX_CLEAR_EXTENSION 70
-+#define QCA955X_CP_NAND_CS1 73
-+#define QCA955X_USB_SUSPEND 74
-+#define QCA955X_ETH_TX_ERR 75
-+#define QCA955X_DDR_DQ_OE 76
-+#define QCA955X_CLKREQ_N_EP 77
-+#define QCA955X_CLKREQ_N_RC 78
-+#define QCA955X_CLK_OBS0 79
-+#define QCA955X_CLK_OBS1 80
-+#define QCA955X_CLK_OBS2 81
-+#define QCA955X_CLK_OBS3 82
-+#define QCA955X_CLK_OBS4 83
-+#define QCA955X_CLK_OBS5 84
-+
-+/*
-+ * MII_CTRL block
-+ */
-+#define AR71XX_MII_REG_MII0_CTRL 0x00
-+#define AR71XX_MII_REG_MII1_CTRL 0x04
-+
-+#define AR71XX_MII_CTRL_IF_MASK 3
-+#define AR71XX_MII_CTRL_SPEED_SHIFT 4
-+#define AR71XX_MII_CTRL_SPEED_MASK 3
-+#define AR71XX_MII_CTRL_SPEED_10 0
-+#define AR71XX_MII_CTRL_SPEED_100 1
-+#define AR71XX_MII_CTRL_SPEED_1000 2
-+
-+#define AR71XX_MII0_CTRL_IF_GMII 0
-+#define AR71XX_MII0_CTRL_IF_MII 1
-+#define AR71XX_MII0_CTRL_IF_RGMII 2
-+#define AR71XX_MII0_CTRL_IF_RMII 3
-+
-+#define AR71XX_MII1_CTRL_IF_RGMII 0
-+#define AR71XX_MII1_CTRL_IF_RMII 1
-+
-+/*
-+ * AR933X GMAC interface
-+ */
-+#define AR933X_GMAC_REG_ETH_CFG 0x00
-+
-+#define AR933X_ETH_CFG_RGMII_GE0 BIT(0)
-+#define AR933X_ETH_CFG_MII_GE0 BIT(1)
-+#define AR933X_ETH_CFG_GMII_GE0 BIT(2)
-+#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3)
-+#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4)
-+#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5)
-+#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7)
-+#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8)
-+#define AR933X_ETH_CFG_RMII_GE0 BIT(9)
-+#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0
-+#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10)
-+
-+/*
-+ * AR934X GMAC Interface
-+ */
-+#define AR934X_GMAC_REG_ETH_CFG 0x00
-+
-+#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0)
-+#define AR934X_ETH_CFG_MII_GMAC0 BIT(1)
-+#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2)
-+#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3)
-+#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4)
-+#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5)
-+#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6)
-+#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7)
-+#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9)
-+#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10)
-+#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11)
-+#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12)
-+#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13)
-+#define AR934X_ETH_CFG_RXD_DELAY BIT(14)
-+#define AR934X_ETH_CFG_RXD_DELAY_MASK 0x3
-+#define AR934X_ETH_CFG_RXD_DELAY_SHIFT 14
-+#define AR934X_ETH_CFG_RDV_DELAY BIT(16)
-+#define AR934X_ETH_CFG_RDV_DELAY_MASK 0x3
-+#define AR934X_ETH_CFG_RDV_DELAY_SHIFT 16
-+
-+/*
-+ * QCA955X GMAC Interface
-+ */
-+
-+#define QCA955X_GMAC_REG_ETH_CFG 0x00
-+
-+#define QCA955X_ETH_CFG_RGMII_EN BIT(0)
-+#define QCA955X_ETH_CFG_MII_GE0 BIT(1)
-+#define QCA955X_ETH_CFG_GMII_GE0 BIT(2)
-+#define QCA955X_ETH_CFG_MII_GE0_MASTER BIT(3)
-+#define QCA955X_ETH_CFG_MII_GE0_SLAVE BIT(4)
-+#define QCA955X_ETH_CFG_GE0_ERR_EN BIT(5)
-+#define QCA955X_ETH_CFG_GE0_SGMII BIT(6)
-+#define QCA955X_ETH_CFG_RMII_GE0 BIT(10)
-+#define QCA955X_ETH_CFG_MII_CNTL_SPEED BIT(11)
-+#define QCA955X_ETH_CFG_RMII_GE0_MASTER BIT(12)
-+#define QCA955X_ETH_CFG_RXD_DELAY_MASK 0x3
-+#define QCA955X_ETH_CFG_RXD_DELAY_SHIFT 14
-+#define QCA955X_ETH_CFG_RDV_DELAY BIT(16)
-+#define QCA955X_ETH_CFG_RDV_DELAY_MASK 0x3
-+#define QCA955X_ETH_CFG_RDV_DELAY_SHIFT 16
-+#define QCA955X_ETH_CFG_TXD_DELAY_MASK 0x3
-+#define QCA955X_ETH_CFG_TXD_DELAY_SHIFT 18
-+#define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3
-+#define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20
-+
- #endif /* __ASM_MACH_AR71XX_REGS_H */
+++ /dev/null
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -98,6 +98,20 @@ config SOC_QCA955X
- select PCI_AR724X if PCI
- def_bool n
-
-+config ATH79_DEV_M25P80
-+ select ATH79_DEV_SPI
-+ def_bool n
-+
-+config ATH79_DEV_AP9X_PCI
-+ select ATH79_PCI_ATH9K_FIXUP
-+ def_bool n
-+
-+config ATH79_DEV_DSA
-+ def_bool n
-+
-+config ATH79_DEV_ETH
-+ def_bool n
-+
- config PCI_AR724X
- def_bool n
-
-@@ -107,6 +121,10 @@ config ATH79_DEV_GPIO_BUTTONS
- config ATH79_DEV_LEDS_GPIO
- def_bool n
-
-+config ATH79_DEV_NFC
-+ depends on (SOC_AR934X || SOC_QCA955X)
-+ def_bool n
-+
- config ATH79_DEV_SPI
- def_bool n
-
-@@ -117,4 +135,14 @@ config ATH79_DEV_WMAC
- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
- def_bool n
-
-+config ATH79_NVRAM
-+ def_bool n
-+
-+config ATH79_PCI_ATH9K_FIXUP
-+ def_bool n
-+
-+config ATH79_ROUTERBOOT
-+ select LZO_DECOMPRESS
-+ def_bool n
-+
- endif
+++ /dev/null
---- a/arch/mips/ath79/mach-ap121.c
-+++ b/arch/mips/ath79/mach-ap121.c
-@@ -1,19 +1,21 @@
- /*
- * Atheros AP121 board support
- *
-- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
--#include "machtypes.h"
-+#include "dev-eth.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
-+#include "dev-m25p80.h"
- #include "dev-spi.h"
- #include "dev-usb.h"
- #include "dev-wmac.h"
-+#include "machtypes.h"
-
- #define AP121_GPIO_LED_WLAN 0
- #define AP121_GPIO_LED_USB 1
-@@ -24,7 +26,14 @@
- #define AP121_KEYS_POLL_INTERVAL 20 /* msecs */
- #define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL)
-
--#define AP121_CAL_DATA_ADDR 0x1fff1000
-+#define AP121_MAC0_OFFSET 0x0000
-+#define AP121_MAC1_OFFSET 0x0006
-+#define AP121_CALDATA_OFFSET 0x1000
-+#define AP121_WMAC_MAC_OFFSET 0x1002
-+
-+#define AP121_MINI_GPIO_LED_WLAN 0
-+#define AP121_MINI_GPIO_BTN_JUMPSTART 12
-+#define AP121_MINI_GPIO_BTN_RESET 11
-
- static struct gpio_led ap121_leds_gpio[] __initdata = {
- {
-@@ -58,35 +67,78 @@ static struct gpio_keys_button ap121_gpi
- }
- };
-
--static struct spi_board_info ap121_spi_info[] = {
-+static struct gpio_led ap121_mini_leds_gpio[] __initdata = {
- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "mx25l1606e",
-- }
-+ .name = "ap121:green:wlan",
-+ .gpio = AP121_MINI_GPIO_LED_WLAN,
-+ .active_low = 0,
-+ },
- };
-
--static struct ath79_spi_platform_data ap121_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
-+static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = {
-+ {
-+ .desc = "jumpstart button",
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
-+ .gpio = AP121_MINI_GPIO_BTN_JUMPSTART,
-+ .active_low = 1,
-+ },
-+ {
-+ .desc = "reset button",
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
-+ .gpio = AP121_MINI_GPIO_BTN_RESET,
-+ .active_low = 1,
-+ }
- };
-
-+static void __init ap121_common_setup(void)
-+{
-+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-+
-+ ath79_register_m25p80(NULL);
-+ ath79_register_wmac(art + AP121_CALDATA_OFFSET,
-+ art + AP121_WMAC_MAC_OFFSET);
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0);
-+ ath79_init_mac(ath79_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0);
-+
-+ ath79_register_mdio(0, 0x0);
-+
-+ /* LAN ports */
-+ ath79_register_eth(1);
-+
-+ /* WAN port */
-+ ath79_register_eth(0);
-+}
-+
- static void __init ap121_setup(void)
- {
-- u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
-+ ap121_common_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
- ap121_leds_gpio);
- ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap121_gpio_keys),
- ap121_gpio_keys);
--
-- ath79_register_spi(&ap121_spi_data, ap121_spi_info,
-- ARRAY_SIZE(ap121_spi_info));
- ath79_register_usb();
-- ath79_register_wmac(cal_data, NULL);
- }
-
- MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
- ap121_setup);
-+
-+static void __init ap121_mini_setup(void)
-+{
-+ ap121_common_setup();
-+
-+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio),
-+ ap121_mini_leds_gpio);
-+ ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
-+ ARRAY_SIZE(ap121_mini_gpio_keys),
-+ ap121_mini_gpio_keys);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI",
-+ ap121_mini_setup);
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -5,9 +5,10 @@ menu "Atheros AR71XX/AR724X/AR913X machi
- config ATH79_MACH_AP121
- bool "Atheros AP121 reference board"
- select SOC_AR933X
-+ select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-+ select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
+++ /dev/null
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -196,7 +196,6 @@ config ATH79
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_MIPS16
- select SYS_SUPPORTS_ZBOOT_UART_PROM
-- select USE_OF
- help
- Support for the Atheros AR71XX/AR724X/AR913X SoCs.
-
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -196,16 +196,20 @@ unsigned int get_c0_compare_int(void)
-
- void __init plat_mem_setup(void)
- {
-+#ifdef CONFIG_OF
- unsigned long fdt_start;
-+#endif
-
- set_io_port_base(KSEG1);
-
-+#ifdef CONFIG_OF
- /* Get the position of the FDT passed by the bootloader */
- fdt_start = fw_getenvl("fdt_start");
- if (fdt_start)
- __dt_setup_arch((void *)KSEG0ADDR(fdt_start));
- else if (fw_passed_dtb)
- __dt_setup_arch((void *)KSEG0ADDR(fw_passed_dtb));
-+#endif
-
- if (mips_machtype != ATH79_MACH_GENERIC_OF) {
- ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
-@@ -301,17 +305,21 @@ static int __init ath79_setup(void)
-
- arch_initcall(ath79_setup);
-
-+#ifdef CONFIG_OF
- void __init device_tree_init(void)
- {
- unflatten_and_copy_device_tree();
- }
-+#endif
-
- MIPS_MACHINE(ATH79_MACH_GENERIC,
- "Generic",
- "Generic AR71XX/AR724X/AR913X based board",
- NULL);
-
-+#ifdef CONFIG_OF
- MIPS_MACHINE(ATH79_MACH_GENERIC_OF,
- "DTB",
- "Generic AR71XX/AR724X/AR913X based board (DT)",
- NULL);
-+#endif
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -33,10 +33,12 @@
- #define AR724X_BASE_FREQ 40000000
-
- static struct clk *clks[ATH79_CLK_END];
-+#ifdef CONFIG_OF
- static struct clk_onecell_data clk_data = {
- .clks = clks,
- .clk_num = ARRAY_SIZE(clks),
- };
-+#endif
-
- static struct clk *__init ath79_add_sys_clkdev(
- const char *id, unsigned long rate)
+++ /dev/null
---- a/arch/mips/ath79/mach-db120.c
-+++ b/arch/mips/ath79/mach-db120.c
-@@ -2,7 +2,7 @@
- * Atheros DB120 reference board support
- *
- * Copyright (c) 2011 Qualcomm Atheros
-- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
-@@ -19,16 +19,26 @@
- */
-
- #include <linux/pci.h>
-+#include <linux/phy.h>
-+#include <linux/platform_device.h>
- #include <linux/ath9k_platform.h>
-+#include <linux/ar8216_platform.h>
-
--#include "machtypes.h"
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+#include "common.h"
-+#include "dev-ap9x-pci.h"
-+#include "dev-eth.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
-+#include "dev-m25p80.h"
-+#include "dev-nfc.h"
- #include "dev-spi.h"
- #include "dev-usb.h"
- #include "dev-wmac.h"
--#include "pci.h"
-+#include "machtypes.h"
-
-+#define DB120_GPIO_LED_USB 11
- #define DB120_GPIO_LED_WLAN_5G 12
- #define DB120_GPIO_LED_WLAN_2G 13
- #define DB120_GPIO_LED_STATUS 14
-@@ -39,8 +49,10 @@
- #define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
- #define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
-
--#define DB120_WMAC_CALDATA_OFFSET 0x1000
--#define DB120_PCIE_CALDATA_OFFSET 0x5000
-+#define DB120_MAC0_OFFSET 0
-+#define DB120_MAC1_OFFSET 6
-+#define DB120_WMAC_CALDATA_OFFSET 0x1000
-+#define DB120_PCIE_CALDATA_OFFSET 0x5000
-
- static struct gpio_led db120_leds_gpio[] __initdata = {
- {
-@@ -63,6 +75,11 @@ static struct gpio_led db120_leds_gpio[]
- .gpio = DB120_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
-+ {
-+ .name = "db120:green:usb",
-+ .gpio = DB120_GPIO_LED_USB,
-+ .active_low = 1,
-+ }
- };
-
- static struct gpio_keys_button db120_gpio_keys[] __initdata = {
-@@ -76,60 +93,85 @@ static struct gpio_keys_button db120_gpi
- },
- };
-
--static struct spi_board_info db120_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "s25sl064a",
-- }
-+static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
-+ .mode = AR8327_PAD_MAC_RGMII,
-+ .txclk_delay_en = true,
-+ .rxclk_delay_en = true,
-+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
-+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
- };
-
--static struct ath79_spi_platform_data db120_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
-+static struct ar8327_led_cfg db120_ar8327_led_cfg = {
-+ .led_ctrl0 = 0x00000000,
-+ .led_ctrl1 = 0xc737c737,
-+ .led_ctrl2 = 0x00000000,
-+ .led_ctrl3 = 0x00c30c00,
-+ .open_drain = true,
- };
-
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data db120_ath9k_data;
--
--static int db120_pci_plat_dev_init(struct pci_dev *dev)
--{
-- switch (PCI_SLOT(dev->devfn)) {
-- case 0:
-- dev->dev.platform_data = &db120_ath9k_data;
-- break;
-- }
--
-- return 0;
--}
--
--static void __init db120_pci_init(u8 *eeprom)
--{
-- memcpy(db120_ath9k_data.eeprom_data, eeprom,
-- sizeof(db120_ath9k_data.eeprom_data));
-+static struct ar8327_platform_data db120_ar8327_data = {
-+ .pad0_cfg = &db120_ar8327_pad0_cfg,
-+ .port0_cfg = {
-+ .force_link = 1,
-+ .speed = AR8327_PORT_SPEED_1000,
-+ .duplex = 1,
-+ .txpause = 1,
-+ .rxpause = 1,
-+ },
-+ .led_cfg = &db120_ar8327_led_cfg,
-+};
-
-- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
-- ath79_register_pci();
--}
--#else
--static inline void db120_pci_init(u8 *eeprom) {}
--#endif /* CONFIG_PCI */
-+static struct mdio_board_info db120_mdio0_info[] = {
-+ {
-+ .bus_id = "ag71xx-mdio.0",
-+ .phy_addr = 0,
-+ .platform_data = &db120_ar8327_data,
-+ },
-+};
-
- static void __init db120_setup(void)
- {
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
-+ ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);
-+ ath79_register_m25p80(NULL);
-+
- ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
- db120_leds_gpio);
- ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(db120_gpio_keys),
- db120_gpio_keys);
-- ath79_register_spi(&db120_spi_data, db120_spi_info,
-- ARRAY_SIZE(db120_spi_info));
- ath79_register_usb();
- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
-- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
-+ ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL);
-+
-+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
-+ AR934X_ETH_CFG_SW_ONLY_MODE);
-+
-+ ath79_register_mdio(1, 0x0);
-+ ath79_register_mdio(0, 0x0);
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
-+
-+ mdiobus_register_board_info(db120_mdio0_info,
-+ ARRAY_SIZE(db120_mdio0_info));
-+
-+ /* GMAC0 is connected to an AR8327 switch */
-+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+ ath79_eth0_data.phy_mask = BIT(0);
-+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
-+ ath79_register_eth(0);
-+
-+ /* GMAC1 is connected to the internal switch */
-+ ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0);
-+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-+ ath79_eth1_data.speed = SPEED_1000;
-+ ath79_eth1_data.duplex = DUPLEX_FULL;
-+
-+ ath79_register_eth(1);
-+
-+ ath79_register_nfc();
- }
-
- MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -42,9 +42,12 @@ config ATH79_MACH_AP81
- config ATH79_MACH_DB120
- bool "Atheros DB120 reference board"
- select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_NFC
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
+++ /dev/null
---- a/arch/mips/ath79/mach-pb44.c
-+++ b/arch/mips/ath79/mach-pb44.c
-@@ -8,23 +8,48 @@
- * by the Free Software Foundation.
- */
-
-+#include <linux/delay.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
- #include <linux/i2c/pcf857x.h>
-+#include <linux/i2c/pcf857x.h>
-+#include <linux/spi/flash.h>
-+#include <linux/spi/vsc7385.h>
-
--#include "machtypes.h"
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+#include <asm/mach-ath79/ath79.h>
-+
-+#include "dev-eth.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
- #include "dev-spi.h"
- #include "dev-usb.h"
-+#include "machtypes.h"
- #include "pci.h"
-
- #define PB44_GPIO_I2C_SCL 0
- #define PB44_GPIO_I2C_SDA 1
-
-+#define PB44_PCF8757_VSC7395_CS 0
-+#define PB44_PCF8757_STEREO_CS 1
-+#define PB44_PCF8757_SLIC_CS0 2
-+#define PB44_PCF8757_SLIC_TEST 3
-+#define PB44_PCF8757_SLIC_INT0 4
-+#define PB44_PCF8757_SLIC_INT1 5
-+#define PB44_PCF8757_SW_RESET 6
-+#define PB44_PCF8757_SW_JUMP 8
-+#define PB44_PCF8757_LED_JUMP1 9
-+#define PB44_PCF8757_LED_JUMP2 10
-+#define PB44_PCF8757_TP24 11
-+#define PB44_PCF8757_TP25 12
-+#define PB44_PCF8757_TP26 13
-+#define PB44_PCF8757_TP27 14
-+#define PB44_PCF8757_TP28 15
-+
- #define PB44_GPIO_EXP_BASE 16
-+#define PB44_GPIO_VSC7395_CS (PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS)
- #define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6)
- #define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8)
- #define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9)
-@@ -87,20 +112,59 @@ static struct gpio_keys_button pb44_gpio
- }
- };
-
-+static void pb44_vsc7395_reset(void)
-+{
-+ ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
-+ udelay(10);
-+ ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
-+ mdelay(50);
-+}
-+
-+static struct vsc7385_platform_data pb44_vsc7395_data = {
-+ .reset = pb44_vsc7395_reset,
-+ .ucode_name = "vsc7395_ucode_pb44.bin",
-+ .mac_cfg = {
-+ .tx_ipg = 6,
-+ .bit2 = 1,
-+ .clk_sel = 0,
-+ },
-+};
-+
-+static const char *pb44_part_probes[] = {
-+ "RedBoot",
-+ NULL,
-+};
-+
-+static struct flash_platform_data pb44_flash_data = {
-+ .part_probes = pb44_part_probes,
-+};
-+
- static struct spi_board_info pb44_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p64",
-+ .platform_data = &pb44_flash_data,
- },
-+ {
-+ .bus_num = 0,
-+ .chip_select = 1,
-+ .max_speed_hz = 25000000,
-+ .modalias = "spi-vsc7385",
-+ .platform_data = &pb44_vsc7395_data,
-+ }
- };
-
- static struct ath79_spi_platform_data pb44_spi_data = {
- .bus_num = 0,
-- .num_chipselect = 1,
-+ .num_chipselect = 2,
- };
-
-+#define PB44_WAN_PHYMASK BIT(0)
-+#define PB44_LAN_PHYMASK 0
-+#define PB44_MDIO_PHYMASK (PB44_LAN_PHYMASK | PB44_WAN_PHYMASK)
-+
- static void __init pb44_init(void)
- {
- i2c_register_board_info(0, pb44_i2c_board_info,
-@@ -116,6 +180,22 @@ static void __init pb44_init(void)
- ARRAY_SIZE(pb44_spi_info));
- ath79_register_usb();
- ath79_register_pci();
-+
-+ ath79_register_mdio(0, ~PB44_MDIO_PHYMASK);
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
-+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+ ath79_eth0_data.phy_mask = PB44_WAN_PHYMASK;
-+
-+ ath79_register_eth(0);
-+
-+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
-+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+ ath79_eth1_data.speed = SPEED_1000;
-+ ath79_eth1_data.duplex = DUPLEX_FULL;
-+ ath79_eth1_pll_data.pll_1000 = 0x110000;
-+
-+ ath79_register_eth(1);
- }
-
- MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -57,6 +57,7 @@ config ATH79_MACH_DB120
- config ATH79_MACH_PB44
- bool "Atheros PB44 reference board"
- select SOC_AR71XX
-+ select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
+++ /dev/null
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -69,9 +69,10 @@ config ATH79_MACH_PB44
- config ATH79_MACH_UBNT_XM
- bool "Ubiquiti Networks XM (rev 1.0) board"
- select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-+ select ATH79_DEV_M25P80
- help
- Say 'Y' here if you want your kernel to support the
- Ubiquiti Networks XM (rev 1.0) board.
+++ /dev/null
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -67,12 +67,16 @@ config ATH79_MACH_PB44
- Atheros PB44 reference board.
-
- config ATH79_MACH_UBNT_XM
-- bool "Ubiquiti Networks XM (rev 1.0) board"
-+ bool "Ubiquiti Networks XM/UniFi boards"
- select SOC_AR724X
-+ select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
- Ubiquiti Networks XM (rev 1.0) board.
+++ /dev/null
---- a/arch/mips/ath79/mach-ap136.c
-+++ b/arch/mips/ath79/mach-ap136.c
-@@ -18,23 +18,29 @@
- *
- */
-
--#include <linux/pci.h>
--#include <linux/ath9k_platform.h>
-+#include <linux/platform_device.h>
-+#include <linux/ar8216_platform.h>
-
--#include "machtypes.h"
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+#include "common.h"
-+#include "pci.h"
-+#include "dev-ap9x-pci.h"
- #include "dev-gpio-buttons.h"
-+#include "dev-eth.h"
- #include "dev-leds-gpio.h"
--#include "dev-spi.h"
-+#include "dev-m25p80.h"
-+#include "dev-nfc.h"
- #include "dev-usb.h"
- #include "dev-wmac.h"
--#include "pci.h"
-+#include "machtypes.h"
-
--#define AP136_GPIO_LED_STATUS_RED 14
--#define AP136_GPIO_LED_STATUS_GREEN 19
- #define AP136_GPIO_LED_USB 4
--#define AP136_GPIO_LED_WLAN_2G 13
- #define AP136_GPIO_LED_WLAN_5G 12
-+#define AP136_GPIO_LED_WLAN_2G 13
-+#define AP136_GPIO_LED_STATUS_RED 14
- #define AP136_GPIO_LED_WPS_RED 15
-+#define AP136_GPIO_LED_STATUS_GREEN 19
- #define AP136_GPIO_LED_WPS_GREEN 20
-
- #define AP136_GPIO_BTN_WPS 16
-@@ -43,37 +49,39 @@
- #define AP136_KEYS_POLL_INTERVAL 20 /* msecs */
- #define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL)
-
--#define AP136_WMAC_CALDATA_OFFSET 0x1000
--#define AP136_PCIE_CALDATA_OFFSET 0x5000
-+#define AP136_MAC0_OFFSET 0
-+#define AP136_MAC1_OFFSET 6
-+#define AP136_WMAC_CALDATA_OFFSET 0x1000
-+#define AP136_PCIE_CALDATA_OFFSET 0x5000
-
- static struct gpio_led ap136_leds_gpio[] __initdata = {
- {
-- .name = "qca:green:status",
-+ .name = "ap136:green:status",
- .gpio = AP136_GPIO_LED_STATUS_GREEN,
- .active_low = 1,
- },
- {
-- .name = "qca:red:status",
-+ .name = "ap136:red:status",
- .gpio = AP136_GPIO_LED_STATUS_RED,
- .active_low = 1,
- },
- {
-- .name = "qca:green:wps",
-+ .name = "ap136:green:wps",
- .gpio = AP136_GPIO_LED_WPS_GREEN,
- .active_low = 1,
- },
- {
-- .name = "qca:red:wps",
-+ .name = "ap136:red:wps",
- .gpio = AP136_GPIO_LED_WPS_RED,
- .active_low = 1,
- },
- {
-- .name = "qca:red:wlan-2g",
-+ .name = "ap136:red:wlan-2g",
- .gpio = AP136_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
- {
-- .name = "qca:red:usb",
-+ .name = "ap136:red:usb",
- .gpio = AP136_GPIO_LED_USB,
- .active_low = 1,
- }
-@@ -98,59 +106,151 @@ static struct gpio_keys_button ap136_gpi
- },
- };
-
--static struct spi_board_info ap136_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "mx25l6405d",
-- }
-+static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg;
-+static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg;
-+
-+static struct ar8327_platform_data ap136_ar8327_data = {
-+ .pad0_cfg = &ap136_ar8327_pad0_cfg,
-+ .pad6_cfg = &ap136_ar8327_pad6_cfg,
-+ .port0_cfg = {
-+ .force_link = 1,
-+ .speed = AR8327_PORT_SPEED_1000,
-+ .duplex = 1,
-+ .txpause = 1,
-+ .rxpause = 1,
-+ },
-+ .port6_cfg = {
-+ .force_link = 1,
-+ .speed = AR8327_PORT_SPEED_1000,
-+ .duplex = 1,
-+ .txpause = 1,
-+ .rxpause = 1,
-+ },
- };
-
--static struct ath79_spi_platform_data ap136_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
-+static struct mdio_board_info ap136_mdio0_info[] = {
-+ {
-+ .bus_id = "ag71xx-mdio.0",
-+ .phy_addr = 0,
-+ .platform_data = &ap136_ar8327_data,
-+ },
- };
-
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data ap136_ath9k_data;
-+static void __init ap136_common_setup(void)
-+{
-+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-+
-+ ath79_register_m25p80(NULL);
-+
-+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
-+ ap136_leds_gpio);
-+ ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
-+ ARRAY_SIZE(ap136_gpio_keys),
-+ ap136_gpio_keys);
-+
-+ ath79_register_usb();
-+ ath79_register_nfc();
-+
-+ ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL);
-+
-+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
--static int ap136_pci_plat_dev_init(struct pci_dev *dev)
-+ ath79_register_mdio(0, 0x0);
-+ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0);
-+
-+ mdiobus_register_board_info(ap136_mdio0_info,
-+ ARRAY_SIZE(ap136_mdio0_info));
-+
-+ /* GMAC0 is connected to the RMGII interface */
-+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+ ath79_eth0_data.phy_mask = BIT(0);
-+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-+
-+ ath79_register_eth(0);
-+
-+ /* GMAC1 is connected tot eh SGMII interface */
-+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
-+ ath79_eth1_data.speed = SPEED_1000;
-+ ath79_eth1_data.duplex = DUPLEX_FULL;
-+
-+ ath79_register_eth(1);
-+}
-+
-+static void __init ap136_010_setup(void)
- {
-- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
-- dev->dev.platform_data = &ap136_ath9k_data;
-+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
-- return 0;
-+ /* GMAC0 of the AR8327 switch is connected to GMAC0 via RGMII */
-+ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
-+ ap136_ar8327_pad0_cfg.txclk_delay_en = true;
-+ ap136_ar8327_pad0_cfg.rxclk_delay_en = true;
-+ ap136_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
-+ ap136_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
-+
-+ /* GMAC6 of the AR8327 switch is connected to GMAC1 via SGMII */
-+ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
-+ ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
-+ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
-+
-+ ath79_eth0_pll_data.pll_1000 = 0xa6000000;
-+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
-+
-+ ap136_common_setup();
-+ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
- }
-
--static void __init ap136_pci_init(u8 *eeprom)
-+MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
-+ "Atheros AP136-010 reference board",
-+ ap136_010_setup);
-+
-+static void __init ap136_020_common_setup(void)
- {
-- memcpy(ap136_ath9k_data.eeprom_data, eeprom,
-- sizeof(ap136_ath9k_data.eeprom_data));
-+ /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
-+ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII;
-+ ap136_ar8327_pad0_cfg.sgmii_delay_en = true;
-+
-+ /* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */
-+ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_RGMII;
-+ ap136_ar8327_pad6_cfg.txclk_delay_en = true;
-+ ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
-+ ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
-+ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
-
-- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
-- ath79_register_pci();
-+ ath79_eth0_pll_data.pll_1000 = 0x56000000;
-+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
-+
-+ ap136_common_setup();
- }
--#else
--static inline void ap136_pci_init(u8 *eeprom) {}
--#endif /* CONFIG_PCI */
-
--static void __init ap136_setup(void)
-+static void __init ap136_020_setup(void)
- {
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
-- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
-- ap136_leds_gpio);
-- ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
-- ARRAY_SIZE(ap136_gpio_keys),
-- ap136_gpio_keys);
-- ath79_register_spi(&ap136_spi_data, ap136_spi_info,
-- ARRAY_SIZE(ap136_spi_info));
-- ath79_register_usb();
-- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
-- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
-+ ap136_020_common_setup();
-+ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
- }
-
--MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
-- "Atheros AP136-010 reference board",
-- ap136_setup);
-+MIPS_MACHINE(ATH79_MACH_AP136_020, "AP136-020",
-+ "Atheros AP136-020 reference board",
-+ ap136_020_setup);
-+
-+/*
-+ * AP135-020 is similar to AP136-020, any future AP135 specific init
-+ * code can be added here.
-+ */
-+static void __init ap135_020_setup(void)
-+{
-+ ap136_leds_gpio[0].name = "ap135:green:status";
-+ ap136_leds_gpio[1].name = "ap135:red:status";
-+ ap136_leds_gpio[2].name = "ap135:green:wps";
-+ ap136_leds_gpio[3].name = "ap135:red:wps";
-+ ap136_leds_gpio[4].name = "ap135:red:wlan-2g";
-+ ap136_leds_gpio[5].name = "ap135:red:usb";
-+
-+ ap136_020_common_setup();
-+ ath79_register_pci();
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_AP135_020, "AP135-020",
-+ "Atheros AP135-020 reference board",
-+ ap135_020_setup);
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -16,16 +16,17 @@ config ATH79_MACH_AP121
- Atheros AP121 reference board.
-
- config ATH79_MACH_AP136
-- bool "Atheros AP136 reference board"
-+ bool "Atheros AP136/AP135 reference board"
- select SOC_QCA955X
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_NFC
- select ATH79_DEV_SPI
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
-- Atheros AP136 reference board.
-+ Atheros AP136 or AP135 reference boards.
-
- config ATH79_MACH_AP81
- bool "Atheros AP81 reference board"
+++ /dev/null
-MIPS: ath79: fix maximum timeout
-
-If the userland tries to set a timeout higher than the max_timeout, then we should fallback to max_timeout.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-
---- a/drivers/watchdog/ath79_wdt.c
-+++ b/drivers/watchdog/ath79_wdt.c
-@@ -115,10 +115,14 @@ static inline void ath79_wdt_disable(voi
-
- static int ath79_wdt_set_timeout(int val)
- {
-- if (val < 1 || val > max_timeout)
-+ if (val < 1)
- return -EINVAL;
-
-- timeout = val;
-+ if (val > max_timeout)
-+ timeout = max_timeout;
-+ else
-+ timeout = val;
-+
- ath79_wdt_keepalive();
-
- return 0;
+++ /dev/null
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -319,6 +319,11 @@ void __init ath79_wmac_disable_5ghz(void
- ath79_wmac_data.disable_5ghz = true;
- }
-
-+void __init ath79_wmac_set_tx_gain_buffalo(void)
-+{
-+ ath79_wmac_data.tx_gain_buffalo = true;
-+}
-+
- void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
- {
- if (soc_is_ar913x())
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -16,6 +16,7 @@ void ath79_register_wmac(u8 *cal_data, u
- void ath79_register_wmac_simple(void);
- void ath79_wmac_disable_2ghz(void);
- void ath79_wmac_disable_5ghz(void);
-+void ath79_wmac_set_tx_gain_buffalo(void);
-
- bool ar93xx_wmac_read_mac_address(u8 *dest);
-
+++ /dev/null
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -18,9 +18,11 @@
- #include <linux/etherdevice.h>
- #include <linux/platform_device.h>
- #include <linux/ath9k_platform.h>
-+#include <linux/gpio.h>
-
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
-+#include "common.h"
- #include "dev-wmac.h"
-
- static u8 ath79_wmac_mac[ETH_ALEN];
-@@ -324,6 +326,51 @@ void __init ath79_wmac_set_tx_gain_buffa
- ath79_wmac_data.tx_gain_buffalo = true;
- }
-
-+static int ath79_request_ext_lna_gpio(unsigned chain, int gpio)
-+{
-+ char *label;
-+ int err;
-+
-+ label = kasprintf(GFP_KERNEL, "external LNA%u", chain);
-+ if (!label)
-+ return -ENOMEM;
-+
-+ err = gpio_request_one(gpio, GPIOF_DIR_OUT | GPIOF_INIT_LOW, label);
-+ if (err) {
-+ pr_err("unable to request GPIO%d for external LNA%u\n",
-+ gpio, chain);
-+ kfree(label);
-+ }
-+
-+ return err;
-+}
-+
-+static void ar934x_set_ext_lna_gpio(unsigned chain, int gpio)
-+{
-+ unsigned int sel;
-+ int err;
-+
-+ if (WARN_ON(chain > 1))
-+ return;
-+
-+ err = ath79_request_ext_lna_gpio(chain, gpio);
-+ if (err)
-+ return;
-+
-+ if (chain == 0)
-+ sel = AR934X_GPIO_OUT_EXT_LNA0;
-+ else
-+ sel = AR934X_GPIO_OUT_EXT_LNA1;
-+
-+ ath79_gpio_output_select(gpio, sel);
-+}
-+
-+void __init ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio)
-+{
-+ if (soc_is_ar934x())
-+ ar934x_set_ext_lna_gpio(chain, gpio);
-+}
-+
- void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
- {
- if (soc_is_ar913x())
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -17,6 +17,7 @@ void ath79_register_wmac_simple(void);
- void ath79_wmac_disable_2ghz(void);
- void ath79_wmac_disable_5ghz(void);
- void ath79_wmac_set_tx_gain_buffalo(void);
-+void ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio);
-
- bool ar93xx_wmac_read_mac_address(u8 *dest);
-
+++ /dev/null
-From 5300a7cd7ed2f88488ddba62947b9c6bb9663777 Mon Sep 17 00:00:00 2001
-Message-Id: <5300a7cd7ed2f88488ddba62947b9c6bb9663777.1396122227.git.mschiffer@universe-factory.net>
-From: Matthias Schiffer <mschiffer@universe-factory.net>
-Date: Sat, 29 Mar 2014 20:26:08 +0100
-Subject: [PATCH 1/2] MIPS: ath79: add support for QCA953x SoC
-
-Note that the clock calculation looks very similar to the QCA955x, but the
-meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
----
- arch/mips/ath79/Kconfig | 6 +-
- arch/mips/ath79/clock.c | 78 ++++++++++++++++++++++++++
- arch/mips/ath79/common.c | 4 ++
- arch/mips/ath79/dev-common.c | 1 +
- arch/mips/ath79/dev-wmac.c | 20 +++++++
- arch/mips/ath79/early_printk.c | 1 +
- arch/mips/ath79/gpio.c | 4 +-
- arch/mips/ath79/irq.c | 4 ++
- arch/mips/ath79/setup.c | 8 ++-
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 48 ++++++++++++++++
- arch/mips/include/asm/mach-ath79/ath79.h | 11 ++++
- 11 files changed, 182 insertions(+), 3 deletions(-)
-
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -104,6 +104,10 @@ config SOC_AR934X
- select PCI_AR724X if PCI
- def_bool n
-
-+config SOC_QCA953X
-+ select USB_ARCH_HAS_EHCI
-+ def_bool n
-+
- config SOC_QCA955X
- select HW_HAS_PCI
- select PCI_AR724X if PCI
-@@ -143,7 +147,7 @@ config ATH79_DEV_USB
- def_bool n
-
- config ATH79_DEV_WMAC
-- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
-+ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X)
- def_bool n
-
- config ATH79_NVRAM
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -358,6 +358,87 @@ static void __init ar934x_clocks_init(vo
- iounmap(dpll_base);
- }
-
-+static void __init qca953x_clocks_init(void)
-+{
-+ unsigned long ref_rate;
-+ unsigned long cpu_rate;
-+ unsigned long ddr_rate;
-+ unsigned long ahb_rate;
-+ u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
-+ u32 cpu_pll, ddr_pll;
-+
-+ /* QCA953X only supports 25MHz ref_clk */
-+ ref_rate = 25 * 1000 * 1000;
-+
-+ pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG);
-+ out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
-+ QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
-+ ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-+ QCA953X_PLL_CPU_CONFIG_REFDIV_MASK;
-+ nint = (pll >> QCA953X_PLL_CPU_CONFIG_NINT_SHIFT) &
-+ QCA953X_PLL_CPU_CONFIG_NINT_MASK;
-+ frac = (pll >> QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
-+ QCA953X_PLL_CPU_CONFIG_NFRAC_MASK;
-+
-+ cpu_pll = nint * ref_rate / ref_div;
-+ cpu_pll += frac * (ref_rate >> 6) / ref_div;
-+ cpu_pll /= (1 << out_div);
-+
-+ pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG);
-+ out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
-+ QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK;
-+ ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-+ QCA953X_PLL_DDR_CONFIG_REFDIV_MASK;
-+ nint = (pll >> QCA953X_PLL_DDR_CONFIG_NINT_SHIFT) &
-+ QCA953X_PLL_DDR_CONFIG_NINT_MASK;
-+ frac = (pll >> QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
-+ QCA953X_PLL_DDR_CONFIG_NFRAC_MASK;
-+
-+ ddr_pll = nint * ref_rate / ref_div;
-+ ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4);
-+ ddr_pll /= (1 << out_div);
-+
-+ clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG);
-+
-+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
-+ QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
-+ cpu_rate = ref_rate;
-+ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL)
-+ cpu_rate = cpu_pll / (postdiv + 1);
-+ else
-+ cpu_rate = ddr_pll / (postdiv + 1);
-+
-+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
-+ QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
-+ ddr_rate = ref_rate;
-+ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL)
-+ ddr_rate = ddr_pll / (postdiv + 1);
-+ else
-+ ddr_rate = cpu_pll / (postdiv + 1);
-+
-+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
-+ QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
-+ ahb_rate = ref_rate;
-+ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
-+ ahb_rate = ddr_pll / (postdiv + 1);
-+ else
-+ ahb_rate = cpu_pll / (postdiv + 1);
-+
-+ ath79_add_sys_clkdev("ref", ref_rate);
-+ ath79_add_sys_clkdev("cpu", cpu_rate);
-+ ath79_add_sys_clkdev("ddr", ddr_rate);
-+ ath79_add_sys_clkdev("ahb", ahb_rate);
-+
-+ clk_add_alias("wdt", NULL, "ref", NULL);
-+ clk_add_alias("uart", NULL, "ref", NULL);
-+}
-+
- static void __init qca955x_clocks_init(void)
- {
- unsigned long ref_rate;
-@@ -453,6 +534,8 @@ void __init ath79_clocks_init(void)
- ar933x_clocks_init();
- else if (soc_is_ar934x())
- ar934x_clocks_init();
-+ else if (soc_is_qca953x())
-+ qca953x_clocks_init();
- else if (soc_is_qca955x())
- qca955x_clocks_init();
- else
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -103,6 +103,8 @@ void ath79_device_reset_set(u32 mask)
- reg = AR933X_RESET_REG_RESET_MODULE;
- else if (soc_is_ar934x())
- reg = AR934X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_qca953x())
-+ reg = QCA953X_RESET_REG_RESET_MODULE;
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
- else
-@@ -131,6 +133,8 @@ void ath79_device_reset_clear(u32 mask)
- reg = AR933X_RESET_REG_RESET_MODULE;
- else if (soc_is_ar934x())
- reg = AR934X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_qca953x())
-+ reg = QCA953X_RESET_REG_RESET_MODULE;
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
- else
---- a/arch/mips/ath79/dev-common.c
-+++ b/arch/mips/ath79/dev-common.c
-@@ -94,6 +94,7 @@ void __init ath79_register_uart(void)
- soc_is_ar724x() ||
- soc_is_ar913x() ||
- soc_is_ar934x() ||
-+ soc_is_qca953x() ||
- soc_is_qca955x()) {
- ath79_uart_data[0].uartclk = uart_clk_rate;
- platform_device_register(&ath79_uart_device);
-@@ -157,6 +158,9 @@ void __init ath79_gpio_init(void)
- } else if (soc_is_ar934x()) {
- ath79_gpio_pdata.ngpios = AR934X_GPIO_COUNT;
- ath79_gpio_pdata.oe_inverted = 1;
-+ } else if (soc_is_qca953x()) {
-+ ath79_gpio_pdata.ngpios = QCA953X_GPIO_COUNT;
-+ ath79_gpio_pdata.oe_inverted = 1;
- } else if (soc_is_qca955x()) {
- ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT;
- ath79_gpio_pdata.oe_inverted = 1;
---- a/arch/mips/ath79/dev-usb.c
-+++ b/arch/mips/ath79/dev-usb.c
-@@ -236,6 +236,30 @@ static void __init ar934x_usb_setup(void
- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
- }
-
-+static void __init qca953x_usb_setup(void)
-+{
-+ u32 bootstrap;
-+
-+ bootstrap = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP);
-+
-+ ath79_device_reset_set(QCA953X_RESET_USBSUS_OVERRIDE);
-+ udelay(1000);
-+
-+ ath79_device_reset_clear(QCA953X_RESET_USB_PHY);
-+ udelay(1000);
-+
-+ ath79_device_reset_clear(QCA953X_RESET_USB_PHY_ANALOG);
-+ udelay(1000);
-+
-+ ath79_device_reset_clear(QCA953X_RESET_USB_HOST);
-+ udelay(1000);
-+
-+ ath79_usb_register("ehci-platform", -1,
-+ QCA953X_EHCI_BASE, QCA953X_EHCI_SIZE,
-+ ATH79_CPU_IRQ(3),
-+ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
-+}
-+
- static void qca955x_usb_reset_notifier(struct platform_device *pdev)
- {
- u32 base;
-@@ -286,6 +310,8 @@ void __init ath79_register_usb(void)
- ar933x_usb_setup();
- else if (soc_is_ar934x())
- ar934x_usb_setup();
-+ else if (soc_is_qca953x())
-+ qca953x_usb_setup();
- else if (soc_is_qca955x())
- qca955x_usb_setup();
- else
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -100,7 +100,7 @@ static int ar933x_wmac_reset(void)
- return -ETIMEDOUT;
- }
-
--static int ar933x_r1_get_wmac_revision(void)
-+static int ar93xx_get_soc_revision(void)
- {
- return ath79_soc_rev;
- }
-@@ -125,7 +125,7 @@ static void __init ar933x_wmac_setup(voi
- ath79_wmac_data.is_clk_25mhz = true;
-
- if (ath79_soc_rev == 1)
-- ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision;
-+ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
-
- ath79_wmac_data.external_reset = ar933x_wmac_reset;
- }
-@@ -150,6 +150,21 @@ static void ar934x_wmac_setup(void)
- ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
- }
-
-+static void qca953x_wmac_setup(void)
-+{
-+ ath79_wmac_device.name = "qca953x_wmac";
-+
-+ ath79_wmac_resources[0].start = QCA953X_WMAC_BASE;
-+ ath79_wmac_resources[0].end = QCA953X_WMAC_BASE + QCA953X_WMAC_SIZE - 1;
-+ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
-+ ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
-+
-+ /* QCA953X only supports 25MHz ref_clk */
-+ ath79_wmac_data.is_clk_25mhz = true;
-+
-+ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
-+}
-+
- static void qca955x_wmac_setup(void)
- {
- u32 t;
-@@ -379,6 +394,8 @@ void __init ath79_register_wmac(u8 *cal_
- ar933x_wmac_setup();
- else if (soc_is_ar934x())
- ar934x_wmac_setup();
-+ else if (soc_is_qca953x())
-+ qca953x_wmac_setup();
- else if (soc_is_qca955x())
- qca955x_wmac_setup();
- else
---- a/arch/mips/ath79/early_printk.c
-+++ b/arch/mips/ath79/early_printk.c
-@@ -116,6 +116,8 @@ static void prom_putchar_init(void)
- case REV_ID_MAJOR_AR9341:
- case REV_ID_MAJOR_AR9342:
- case REV_ID_MAJOR_AR9344:
-+ case REV_ID_MAJOR_QCA9533:
-+ case REV_ID_MAJOR_QCA9533_V2:
- case REV_ID_MAJOR_QCA9556:
- case REV_ID_MAJOR_QCA9558:
- _prom_putchar = prom_putchar_ar71xx;
---- a/arch/mips/ath79/gpio.c
-+++ b/arch/mips/ath79/gpio.c
-@@ -31,7 +31,7 @@ static void __iomem *ath79_gpio_get_func
- soc_is_ar913x() ||
- soc_is_ar933x())
- reg = AR71XX_GPIO_REG_FUNC;
-- else if (soc_is_ar934x())
-+ else if (soc_is_ar934x() || soc_is_qca953x())
- reg = AR934X_GPIO_REG_FUNC;
- else
- BUG();
-@@ -64,7 +64,7 @@ void __init ath79_gpio_output_select(uns
- unsigned int reg;
- u32 t, s;
-
-- BUG_ON(!soc_is_ar934x());
-+ BUG_ON(!soc_is_ar934x() && !soc_is_qca953x());
-
- if (gpio >= AR934X_GPIO_COUNT)
- return;
---- a/arch/mips/ath79/irq.c
-+++ b/arch/mips/ath79/irq.c
-@@ -56,6 +56,34 @@ static void ar934x_ip2_irq_init(void)
- irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch);
- }
-
-+static void qca953x_ip2_irq_dispatch(struct irq_desc *desc)
-+{
-+ u32 status;
-+
-+ status = ath79_reset_rr(QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS);
-+
-+ if (status & QCA953X_PCIE_WMAC_INT_PCIE_ALL) {
-+ ath79_ddr_wb_flush(3);
-+ generic_handle_irq(ATH79_IP2_IRQ(0));
-+ } else if (status & QCA953X_PCIE_WMAC_INT_WMAC_ALL) {
-+ ath79_ddr_wb_flush(4);
-+ generic_handle_irq(ATH79_IP2_IRQ(1));
-+ } else {
-+ spurious_interrupt();
-+ }
-+}
-+
-+static void qca953x_irq_init(void)
-+{
-+ int i;
-+
-+ for (i = ATH79_IP2_IRQ_BASE;
-+ i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-+ irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
-+
-+ irq_set_chained_handler(ATH79_CPU_IRQ(2), qca953x_ip2_irq_dispatch);
-+}
-+
- static void qca955x_ip2_irq_dispatch(struct irq_desc *desc)
- {
- u32 status;
-@@ -143,7 +171,7 @@ void __init arch_init_irq(void)
- soc_is_ar913x() || soc_is_ar933x()) {
- irq_wb_chan2 = 3;
- irq_wb_chan3 = 2;
-- } else if (soc_is_ar934x()) {
-+ } else if (soc_is_ar934x() || soc_is_qca953x()) {
- irq_wb_chan3 = 2;
- }
-
-@@ -154,6 +182,7 @@ void __init arch_init_irq(void)
- else if (soc_is_ar724x() ||
- soc_is_ar933x() ||
- soc_is_ar934x() ||
-+ soc_is_qca953x() ||
- soc_is_qca955x())
- misc_is_ar71xx = false;
- else
-@@ -164,6 +193,8 @@ void __init arch_init_irq(void)
-
- if (soc_is_ar934x())
- ar934x_ip2_irq_init();
-+ else if (soc_is_qca953x())
-+ qca953x_irq_init();
- else if (soc_is_qca955x())
- qca955x_irq_init();
- }
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -60,6 +60,7 @@ static void __init ath79_detect_sys_type
- u32 major;
- u32 minor;
- u32 rev = 0;
-+ u32 ver = 1;
-
- id = ath79_reset_rr(AR71XX_RESET_REG_REV_ID);
- major = id & REV_ID_MAJOR_MASK;
-@@ -152,6 +153,17 @@ static void __init ath79_detect_sys_type
- rev = id & AR934X_REV_ID_REVISION_MASK;
- break;
-
-+ case REV_ID_MAJOR_QCA9533_V2:
-+ ver = 2;
-+ ath79_soc_rev = 2;
-+ /* drop through */
-+
-+ case REV_ID_MAJOR_QCA9533:
-+ ath79_soc = ATH79_SOC_QCA9533;
-+ chip = "9533";
-+ rev = id & QCA953X_REV_ID_REVISION_MASK;
-+ break;
-+
- case REV_ID_MAJOR_QCA9556:
- ath79_soc = ATH79_SOC_QCA9556;
- chip = "9556";
-@@ -168,11 +180,12 @@ static void __init ath79_detect_sys_type
- panic("ath79: unknown SoC, id:0x%08x", id);
- }
-
-- ath79_soc_rev = rev;
-+ if (ver == 1)
-+ ath79_soc_rev = rev;
-
-- if (soc_is_qca955x())
-- sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u",
-- chip, rev);
-+ if (soc_is_qca953x() || soc_is_qca955x())
-+ sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s ver %u rev %u",
-+ chip, ver, rev);
- else
- sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);
- pr_info("SoC: %s\n", ath79_sys_type);
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -105,6 +105,21 @@
- #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
- #define AR934X_SRIF_SIZE 0x1000
-
-+#define QCA953X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define QCA953X_GMAC_SIZE 0x14
-+#define QCA953X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
-+#define QCA953X_WMAC_SIZE 0x20000
-+#define QCA953X_EHCI_BASE 0x1b000000
-+#define QCA953X_EHCI_SIZE 0x200
-+#define QCA953X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
-+#define QCA953X_SRIF_SIZE 0x1000
-+
-+#define QCA953X_PCI_CFG_BASE0 0x14000000
-+#define QCA953X_PCI_CTRL_BASE0 (AR71XX_APB_BASE + 0x000f0000)
-+#define QCA953X_PCI_CRP_BASE0 (AR71XX_APB_BASE + 0x000c0000)
-+#define QCA953X_PCI_MEM_BASE0 0x10000000
-+#define QCA953X_PCI_MEM_SIZE 0x02000000
-+
- #define QCA955X_PCI_MEM_BASE0 0x10000000
- #define QCA955X_PCI_MEM_BASE1 0x12000000
- #define QCA955X_PCI_MEM_SIZE 0x02000000
-@@ -180,6 +195,12 @@
- #define AR934X_OTP_INTF3_ADDRESS 0x3100c
- #define AR934X_OTP_PGENB_SETUP_HOLD_TIME_ADDRESS 0x31034
-
-+#define QCA953X_DDR_REG_FLUSH_GE0 0x9c
-+#define QCA953X_DDR_REG_FLUSH_GE1 0xa0
-+#define QCA953X_DDR_REG_FLUSH_USB 0xa4
-+#define QCA953X_DDR_REG_FLUSH_PCIE 0xa8
-+#define QCA953X_DDR_REG_FLUSH_WMAC 0xac
-+
- /*
- * PLL block
- */
-@@ -289,6 +310,44 @@
-
- #define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6)
-
-+#define QCA953X_PLL_CPU_CONFIG_REG 0x00
-+#define QCA953X_PLL_DDR_CONFIG_REG 0x04
-+#define QCA953X_PLL_CLK_CTRL_REG 0x08
-+#define QCA953X_PLL_SWITCH_CLOCK_CONTROL_REG 0x24
-+#define QCA953X_PLL_ETH_XMII_CONTROL_REG 0x2c
-+#define QCA953X_PLL_ETH_SGMII_CONTROL_REG 0x48
-+
-+#define QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
-+#define QCA953X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-+#define QCA953X_PLL_CPU_CONFIG_NINT_SHIFT 6
-+#define QCA953X_PLL_CPU_CONFIG_NINT_MASK 0x3f
-+#define QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
-+#define QCA953X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
-+#define QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19
-+#define QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7
-+
-+#define QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT 0
-+#define QCA953X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff
-+#define QCA953X_PLL_DDR_CONFIG_NINT_SHIFT 10
-+#define QCA953X_PLL_DDR_CONFIG_NINT_MASK 0x3f
-+#define QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT 16
-+#define QCA953X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f
-+#define QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23
-+#define QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7
-+
-+#define QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2)
-+#define QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3)
-+#define QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4)
-+#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5
-+#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f
-+#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10
-+#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f
-+#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15
-+#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f
-+#define QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20)
-+#define QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
-+#define QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-+
- #define QCA955X_PLL_CPU_CONFIG_REG 0x00
- #define QCA955X_PLL_DDR_CONFIG_REG 0x04
- #define QCA955X_PLL_CLK_CTRL_REG 0x08
-@@ -365,6 +424,10 @@
- #define AR934X_RESET_REG_BOOTSTRAP 0xb0
- #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
-
-+#define QCA953X_RESET_REG_RESET_MODULE 0x1c
-+#define QCA953X_RESET_REG_BOOTSTRAP 0xb0
-+#define QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
-+
- #define QCA955X_RESET_REG_RESET_MODULE 0x1c
- #define QCA955X_RESET_REG_BOOTSTRAP 0xb0
- #define QCA955X_RESET_REG_EXT_INT_STATUS 0xac
-@@ -460,6 +523,27 @@
- #define AR934X_RESET_MBOX BIT(1)
- #define AR934X_RESET_I2S BIT(0)
-
-+#define QCA953X_RESET_USB_EXT_PWR BIT(29)
-+#define QCA953X_RESET_EXTERNAL BIT(28)
-+#define QCA953X_RESET_RTC BIT(27)
-+#define QCA953X_RESET_FULL_CHIP BIT(24)
-+#define QCA953X_RESET_GE1_MDIO BIT(23)
-+#define QCA953X_RESET_GE0_MDIO BIT(22)
-+#define QCA953X_RESET_CPU_NMI BIT(21)
-+#define QCA953X_RESET_CPU_COLD BIT(20)
-+#define QCA953X_RESET_DDR BIT(16)
-+#define QCA953X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
-+#define QCA953X_RESET_GE1_MAC BIT(13)
-+#define QCA953X_RESET_ETH_SWITCH_ANALOG BIT(12)
-+#define QCA953X_RESET_USB_PHY_ANALOG BIT(11)
-+#define QCA953X_RESET_GE0_MAC BIT(9)
-+#define QCA953X_RESET_ETH_SWITCH BIT(8)
-+#define QCA953X_RESET_PCIE_PHY BIT(7)
-+#define QCA953X_RESET_PCIE BIT(6)
-+#define QCA953X_RESET_USB_HOST BIT(5)
-+#define QCA953X_RESET_USB_PHY BIT(4)
-+#define QCA953X_RESET_USBSUS_OVERRIDE BIT(3)
-+
- #define QCA955X_RESET_HOST BIT(31)
- #define QCA955X_RESET_SLIC BIT(30)
- #define QCA955X_RESET_HDMA BIT(29)
-@@ -513,6 +597,13 @@
- #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
- #define AR934X_BOOTSTRAP_DDR1 BIT(0)
-
-+#define QCA953X_BOOTSTRAP_SW_OPTION2 BIT(12)
-+#define QCA953X_BOOTSTRAP_SW_OPTION1 BIT(11)
-+#define QCA953X_BOOTSTRAP_EJTAG_MODE BIT(5)
-+#define QCA953X_BOOTSTRAP_REF_CLK BIT(4)
-+#define QCA953X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
-+#define QCA953X_BOOTSTRAP_DDR1 BIT(0)
-+
- #define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4)
-
- #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
-@@ -533,6 +624,24 @@
- AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
- AR934X_PCIE_WMAC_INT_PCIE_RC3)
-
-+#define QCA953X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
-+#define QCA953X_PCIE_WMAC_INT_WMAC_TX BIT(1)
-+#define QCA953X_PCIE_WMAC_INT_WMAC_RXLP BIT(2)
-+#define QCA953X_PCIE_WMAC_INT_WMAC_RXHP BIT(3)
-+#define QCA953X_PCIE_WMAC_INT_PCIE_RC BIT(4)
-+#define QCA953X_PCIE_WMAC_INT_PCIE_RC0 BIT(5)
-+#define QCA953X_PCIE_WMAC_INT_PCIE_RC1 BIT(6)
-+#define QCA953X_PCIE_WMAC_INT_PCIE_RC2 BIT(7)
-+#define QCA953X_PCIE_WMAC_INT_PCIE_RC3 BIT(8)
-+#define QCA953X_PCIE_WMAC_INT_WMAC_ALL \
-+ (QCA953X_PCIE_WMAC_INT_WMAC_MISC | QCA953X_PCIE_WMAC_INT_WMAC_TX | \
-+ QCA953X_PCIE_WMAC_INT_WMAC_RXLP | QCA953X_PCIE_WMAC_INT_WMAC_RXHP)
-+
-+#define QCA953X_PCIE_WMAC_INT_PCIE_ALL \
-+ (QCA953X_PCIE_WMAC_INT_PCIE_RC | QCA953X_PCIE_WMAC_INT_PCIE_RC0 | \
-+ QCA953X_PCIE_WMAC_INT_PCIE_RC1 | QCA953X_PCIE_WMAC_INT_PCIE_RC2 | \
-+ QCA953X_PCIE_WMAC_INT_PCIE_RC3)
-+
- #define QCA955X_EXT_INT_WMAC_MISC BIT(0)
- #define QCA955X_EXT_INT_WMAC_TX BIT(1)
- #define QCA955X_EXT_INT_WMAC_RXLP BIT(2)
-@@ -575,6 +684,8 @@
- #define REV_ID_MAJOR_AR9341 0x0120
- #define REV_ID_MAJOR_AR9342 0x1120
- #define REV_ID_MAJOR_AR9344 0x2120
-+#define REV_ID_MAJOR_QCA9533 0x0140
-+#define REV_ID_MAJOR_QCA9533_V2 0x0160
- #define REV_ID_MAJOR_QCA9556 0x0130
- #define REV_ID_MAJOR_QCA9558 0x1130
-
-@@ -597,6 +708,8 @@
-
- #define AR934X_REV_ID_REVISION_MASK 0xf
-
-+#define QCA953X_REV_ID_REVISION_MASK 0xf
-+
- #define QCA955X_REV_ID_REVISION_MASK 0xf
-
- /*
-@@ -644,6 +757,25 @@
- #define AR934X_GPIO_REG_OUT_FUNC5 0x40
- #define AR934X_GPIO_REG_FUNC 0x6c
-
-+#define QCA953X_GPIO_REG_OUT_FUNC0 0x2c
-+#define QCA953X_GPIO_REG_OUT_FUNC1 0x30
-+#define QCA953X_GPIO_REG_OUT_FUNC2 0x34
-+#define QCA953X_GPIO_REG_OUT_FUNC3 0x38
-+#define QCA953X_GPIO_REG_OUT_FUNC4 0x3c
-+#define QCA953X_GPIO_REG_IN_ENABLE0 0x44
-+#define QCA953X_GPIO_REG_FUNC 0x6c
-+
-+#define QCA953X_GPIO_OUT_MUX_SPI_CS1 10
-+#define QCA953X_GPIO_OUT_MUX_SPI_CS2 11
-+#define QCA953X_GPIO_OUT_MUX_SPI_CS0 9
-+#define QCA953X_GPIO_OUT_MUX_SPI_CLK 8
-+#define QCA953X_GPIO_OUT_MUX_SPI_MOSI 12
-+#define QCA953X_GPIO_OUT_MUX_LED_LINK1 41
-+#define QCA953X_GPIO_OUT_MUX_LED_LINK2 42
-+#define QCA953X_GPIO_OUT_MUX_LED_LINK3 43
-+#define QCA953X_GPIO_OUT_MUX_LED_LINK4 44
-+#define QCA953X_GPIO_OUT_MUX_LED_LINK5 45
-+
- #define QCA955X_GPIO_REG_OUT_FUNC0 0x2c
- #define QCA955X_GPIO_REG_OUT_FUNC1 0x30
- #define QCA955X_GPIO_REG_OUT_FUNC2 0x34
-@@ -658,6 +790,7 @@
- #define AR913X_GPIO_COUNT 22
- #define AR933X_GPIO_COUNT 30
- #define AR934X_GPIO_COUNT 23
-+#define QCA953X_GPIO_COUNT 18
- #define QCA955X_GPIO_COUNT 24
-
- /*
-@@ -681,6 +814,24 @@
- #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13
- #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7
-
-+#define QCA953X_SRIF_CPU_DPLL1_REG 0x1c0
-+#define QCA953X_SRIF_CPU_DPLL2_REG 0x1c4
-+#define QCA953X_SRIF_CPU_DPLL3_REG 0x1c8
-+
-+#define QCA953X_SRIF_DDR_DPLL1_REG 0x240
-+#define QCA953X_SRIF_DDR_DPLL2_REG 0x244
-+#define QCA953X_SRIF_DDR_DPLL3_REG 0x248
-+
-+#define QCA953X_SRIF_DPLL1_REFDIV_SHIFT 27
-+#define QCA953X_SRIF_DPLL1_REFDIV_MASK 0x1f
-+#define QCA953X_SRIF_DPLL1_NINT_SHIFT 18
-+#define QCA953X_SRIF_DPLL1_NINT_MASK 0x1ff
-+#define QCA953X_SRIF_DPLL1_NFRAC_MASK 0x0003ffff
-+
-+#define QCA953X_SRIF_DPLL2_LOCAL_PLL BIT(30)
-+#define QCA953X_SRIF_DPLL2_OUTDIV_SHIFT 13
-+#define QCA953X_SRIF_DPLL2_OUTDIV_MASK 0x7
-+
- #define AR71XX_GPIO_FUNC_STEREO_EN BIT(17)
- #define AR71XX_GPIO_FUNC_SLIC_EN BIT(16)
- #define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13)
-@@ -887,6 +1038,16 @@
- #define AR934X_ETH_CFG_RDV_DELAY_SHIFT 16
-
- /*
-+ * QCA953X GMAC Interface
-+ */
-+#define QCA953X_GMAC_REG_ETH_CFG 0x00
-+
-+#define QCA953X_ETH_CFG_SW_ONLY_MODE BIT(6)
-+#define QCA953X_ETH_CFG_SW_PHY_SWAP BIT(7)
-+#define QCA953X_ETH_CFG_SW_APB_ACCESS BIT(9)
-+#define QCA953X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13)
-+
-+/*
- * QCA955X GMAC Interface
- */
-
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -32,6 +32,7 @@ enum ath79_soc_type {
- ATH79_SOC_AR9341,
- ATH79_SOC_AR9342,
- ATH79_SOC_AR9344,
-+ ATH79_SOC_QCA9533,
- ATH79_SOC_QCA9556,
- ATH79_SOC_QCA9558,
- };
-@@ -100,6 +101,16 @@ static inline int soc_is_ar934x(void)
- return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344();
- }
-
-+static inline int soc_is_qca9533(void)
-+{
-+ return ath79_soc == ATH79_SOC_QCA9533;
-+}
-+
-+static inline int soc_is_qca953x(void)
-+{
-+ return soc_is_qca9533();
-+}
-+
- static inline int soc_is_qca9556(void)
- {
- return ath79_soc == ATH79_SOC_QCA9556;
+++ /dev/null
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -113,6 +113,12 @@ config SOC_QCA955X
- select PCI_AR724X if PCI
- def_bool n
-
-+config SOC_QCA956X
-+ select USB_ARCH_HAS_EHCI
-+ select HW_HAS_PCI
-+ select PCI_AR724X if PCI
-+ def_bool n
-+
- config ATH79_DEV_M25P80
- select ATH79_DEV_SPI
- def_bool n
-@@ -147,7 +153,7 @@ config ATH79_DEV_USB
- def_bool n
-
- config ATH79_DEV_WMAC
-- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X)
-+ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X || SOC_QCA956X)
- def_bool n
-
- config ATH79_NVRAM
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -524,6 +524,100 @@ static void __init qca955x_clocks_init(v
- clk_add_alias("uart", NULL, "ref", NULL);
- }
-
-+static void __init qca956x_clocks_init(void)
-+{
-+ unsigned long ref_rate;
-+ unsigned long cpu_rate;
-+ unsigned long ddr_rate;
-+ unsigned long ahb_rate;
-+ u32 pll, out_div, ref_div, nint, hfrac, lfrac, clk_ctrl, postdiv;
-+ u32 cpu_pll, ddr_pll;
-+ u32 bootstrap;
-+
-+ bootstrap = ath79_reset_rr(QCA956X_RESET_REG_BOOTSTRAP);
-+ if (bootstrap & QCA956X_BOOTSTRAP_REF_CLK_40)
-+ ref_rate = 40 * 1000 * 1000;
-+ else
-+ ref_rate = 25 * 1000 * 1000;
-+
-+ pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG);
-+ out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
-+ QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK;
-+ ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-+ QCA956X_PLL_CPU_CONFIG_REFDIV_MASK;
-+
-+ pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG);
-+ nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) &
-+ QCA956X_PLL_CPU_CONFIG1_NINT_MASK;
-+ hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) &
-+ QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK;
-+ lfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT) &
-+ QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK;
-+
-+ cpu_pll = nint * ref_rate / ref_div;
-+ cpu_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13);
-+ cpu_pll += (hfrac >> 13) * ref_rate / ref_div;
-+ cpu_pll /= (1 << out_div);
-+
-+ pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG);
-+ out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
-+ QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK;
-+ ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-+ QCA956X_PLL_DDR_CONFIG_REFDIV_MASK;
-+ pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG);
-+ nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) &
-+ QCA956X_PLL_DDR_CONFIG1_NINT_MASK;
-+ hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) &
-+ QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK;
-+ lfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT) &
-+ QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK;
-+
-+ ddr_pll = nint * ref_rate / ref_div;
-+ ddr_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13);
-+ ddr_pll += (hfrac >> 13) * ref_rate / ref_div;
-+ ddr_pll /= (1 << out_div);
-+
-+ clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG);
-+
-+ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
-+ QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
-+ cpu_rate = ref_rate;
-+ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL)
-+ cpu_rate = ddr_pll / (postdiv + 1);
-+ else
-+ cpu_rate = cpu_pll / (postdiv + 1);
-+
-+ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
-+ QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
-+ ddr_rate = ref_rate;
-+ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL)
-+ ddr_rate = cpu_pll / (postdiv + 1);
-+ else
-+ ddr_rate = ddr_pll / (postdiv + 1);
-+
-+ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
-+ QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
-+ ahb_rate = ref_rate;
-+ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
-+ ahb_rate = ddr_pll / (postdiv + 1);
-+ else
-+ ahb_rate = cpu_pll / (postdiv + 1);
-+
-+ ath79_add_sys_clkdev("ref", ref_rate);
-+ ath79_add_sys_clkdev("cpu", cpu_rate);
-+ ath79_add_sys_clkdev("ddr", ddr_rate);
-+ ath79_add_sys_clkdev("ahb", ahb_rate);
-+
-+ clk_add_alias("wdt", NULL, "ref", NULL);
-+ clk_add_alias("uart", NULL, "ref", NULL);
-+}
-+
- void __init ath79_clocks_init(void)
- {
- if (soc_is_ar71xx())
-@@ -538,6 +632,8 @@ void __init ath79_clocks_init(void)
- qca953x_clocks_init();
- else if (soc_is_qca955x())
- qca955x_clocks_init();
-+ else if (soc_is_qca956x() || soc_is_tp9343())
-+ qca956x_clocks_init();
- else
- BUG();
- }
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -107,6 +107,8 @@ void ath79_device_reset_set(u32 mask)
- reg = QCA953X_RESET_REG_RESET_MODULE;
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_qca956x() || soc_is_tp9343())
-+ reg = QCA956X_RESET_REG_RESET_MODULE;
- else
- panic("Reset register not defined for this SOC");
-
-@@ -137,6 +139,8 @@ void ath79_device_reset_clear(u32 mask)
- reg = QCA953X_RESET_REG_RESET_MODULE;
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_qca956x() || soc_is_tp9343())
-+ reg = QCA956X_RESET_REG_RESET_MODULE;
- else
- panic("Reset register not defined for this SOC");
-
-@@ -163,6 +167,8 @@ u32 ath79_device_reset_get(u32 mask)
- reg = AR933X_RESET_REG_RESET_MODULE;
- else if (soc_is_ar934x())
- reg = AR934X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_qca956x() || soc_is_tp9343())
-+ reg = QCA956X_RESET_REG_RESET_MODULE;
- else
- BUG();
-
---- a/arch/mips/ath79/dev-common.c
-+++ b/arch/mips/ath79/dev-common.c
-@@ -95,7 +95,9 @@ void __init ath79_register_uart(void)
- soc_is_ar913x() ||
- soc_is_ar934x() ||
- soc_is_qca953x() ||
-- soc_is_qca955x()) {
-+ soc_is_qca955x() ||
-+ soc_is_qca956x() ||
-+ soc_is_tp9343()) {
- ath79_uart_data[0].uartclk = uart_clk_rate;
- platform_device_register(&ath79_uart_device);
- } else if (soc_is_ar933x()) {
-@@ -164,6 +166,9 @@ void __init ath79_gpio_init(void)
- } else if (soc_is_qca955x()) {
- ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT;
- ath79_gpio_pdata.oe_inverted = 1;
-+ } else if (soc_is_qca956x() || soc_is_tp9343()) {
-+ ath79_gpio_pdata.ngpios = QCA956X_GPIO_COUNT;
-+ ath79_gpio_pdata.oe_inverted = 1;
- } else {
- BUG();
- }
---- a/arch/mips/ath79/dev-usb.c
-+++ b/arch/mips/ath79/dev-usb.c
-@@ -296,6 +296,19 @@ static void __init qca955x_usb_setup(voi
- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
- }
-
-+static void __init qca956x_usb_setup(void)
-+{
-+ ath79_usb_register("ehci-platform", 0,
-+ QCA956X_EHCI0_BASE, QCA956X_EHCI_SIZE,
-+ ATH79_IP3_IRQ(0),
-+ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
-+
-+ ath79_usb_register("ehci-platform", 1,
-+ QCA956X_EHCI1_BASE, QCA956X_EHCI_SIZE,
-+ ATH79_IP3_IRQ(1),
-+ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
-+}
-+
- void __init ath79_register_usb(void)
- {
- if (soc_is_ar71xx())
-@@ -314,6 +327,8 @@ void __init ath79_register_usb(void)
- qca953x_usb_setup();
- else if (soc_is_qca955x())
- qca955x_usb_setup();
-+ else if (soc_is_qca956x())
-+ qca956x_usb_setup();
- else
- BUG();
- }
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -195,6 +195,26 @@ static void qca955x_wmac_setup(void)
- #define AR93XX_OTP_READ_DATA \
- (soc_is_ar934x() ? AR934X_OTP_READ_DATA : AR9300_OTP_READ_DATA)
-
-+static void qca956x_wmac_setup(void)
-+{
-+ u32 t;
-+
-+ ath79_wmac_device.name = "qca956x_wmac";
-+
-+ ath79_wmac_resources[0].start = QCA956X_WMAC_BASE;
-+ ath79_wmac_resources[0].end = QCA956X_WMAC_BASE + QCA956X_WMAC_SIZE - 1;
-+ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
-+ ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
-+
-+ t = ath79_reset_rr(QCA956X_RESET_REG_BOOTSTRAP);
-+ if (t & QCA956X_BOOTSTRAP_REF_CLK_40)
-+ ath79_wmac_data.is_clk_25mhz = false;
-+ else
-+ ath79_wmac_data.is_clk_25mhz = true;
-+
-+ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
-+}
-+
- static bool __init
- ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data)
- {
-@@ -398,6 +418,8 @@ void __init ath79_register_wmac(u8 *cal_
- qca953x_wmac_setup();
- else if (soc_is_qca955x())
- qca955x_wmac_setup();
-+ else if (soc_is_qca956x() || soc_is_tp9343())
-+ qca956x_wmac_setup();
- else
- BUG();
-
---- a/arch/mips/ath79/early_printk.c
-+++ b/arch/mips/ath79/early_printk.c
-@@ -120,6 +120,8 @@ static void prom_putchar_init(void)
- case REV_ID_MAJOR_QCA9533_V2:
- case REV_ID_MAJOR_QCA9556:
- case REV_ID_MAJOR_QCA9558:
-+ case REV_ID_MAJOR_TP9343:
-+ case REV_ID_MAJOR_QCA956X:
- _prom_putchar = prom_putchar_ar71xx;
- break;
-
---- a/arch/mips/ath79/gpio.c
-+++ b/arch/mips/ath79/gpio.c
-@@ -31,7 +31,10 @@ static void __iomem *ath79_gpio_get_func
- soc_is_ar913x() ||
- soc_is_ar933x())
- reg = AR71XX_GPIO_REG_FUNC;
-- else if (soc_is_ar934x() || soc_is_qca953x())
-+ else if (soc_is_ar934x() ||
-+ soc_is_qca953x() ||
-+ soc_is_qca956x() ||
-+ soc_is_tp9343())
- reg = AR934X_GPIO_REG_FUNC;
- else
- BUG();
-@@ -64,7 +67,7 @@ void __init ath79_gpio_output_select(uns
- unsigned int reg;
- u32 t, s;
-
-- BUG_ON(!soc_is_ar934x() && !soc_is_qca953x());
-+ BUG_ON(!soc_is_ar934x() && !soc_is_qca953x() && !soc_is_qca956x());
-
- if (gpio >= AR934X_GPIO_COUNT)
- return;
---- a/arch/mips/ath79/irq.c
-+++ b/arch/mips/ath79/irq.c
-@@ -156,6 +156,87 @@ static void qca955x_irq_init(void)
- irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
- }
-
-+static void qca956x_ip2_irq_dispatch(struct irq_desc *desc)
-+{
-+ u32 status;
-+
-+ status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS);
-+ status &= QCA956X_EXT_INT_PCIE_RC1_ALL | QCA956X_EXT_INT_WMAC_ALL;
-+
-+ if (status == 0) {
-+ spurious_interrupt();
-+ return;
-+ }
-+
-+ if (status & QCA956X_EXT_INT_PCIE_RC1_ALL) {
-+ /* TODO: flush DDR? */
-+ generic_handle_irq(ATH79_IP2_IRQ(0));
-+ }
-+
-+ if (status & QCA956X_EXT_INT_WMAC_ALL) {
-+ /* TODO: flsuh DDR? */
-+ generic_handle_irq(ATH79_IP2_IRQ(1));
-+ }
-+}
-+
-+static void qca956x_ip3_irq_dispatch(struct irq_desc *desc)
-+{
-+ u32 status;
-+
-+ status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS);
-+ status &= QCA956X_EXT_INT_PCIE_RC2_ALL |
-+ QCA956X_EXT_INT_USB1 | QCA956X_EXT_INT_USB2;
-+
-+ if (status == 0) {
-+ spurious_interrupt();
-+ return;
-+ }
-+
-+ if (status & QCA956X_EXT_INT_USB1) {
-+ /* TODO: flush DDR? */
-+ generic_handle_irq(ATH79_IP3_IRQ(0));
-+ }
-+
-+ if (status & QCA956X_EXT_INT_USB2) {
-+ /* TODO: flush DDR? */
-+ generic_handle_irq(ATH79_IP3_IRQ(1));
-+ }
-+
-+ if (status & QCA956X_EXT_INT_PCIE_RC2_ALL) {
-+ /* TODO: flush DDR? */
-+ generic_handle_irq(ATH79_IP3_IRQ(2));
-+ }
-+}
-+
-+static void qca956x_enable_timer_cb(void) {
-+ u32 misc;
-+
-+ misc = ath79_reset_rr(AR71XX_RESET_REG_MISC_INT_ENABLE);
-+ misc |= MISC_INT_MIPS_SI_TIMERINT_MASK;
-+ ath79_reset_wr(AR71XX_RESET_REG_MISC_INT_ENABLE, misc);
-+}
-+
-+static void qca956x_irq_init(void)
-+{
-+ int i;
-+
-+ for (i = ATH79_IP2_IRQ_BASE;
-+ i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-+ irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
-+
-+ irq_set_chained_handler(ATH79_CPU_IRQ(2), qca956x_ip2_irq_dispatch);
-+
-+ for (i = ATH79_IP3_IRQ_BASE;
-+ i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
-+ irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
-+
-+ irq_set_chained_handler(ATH79_CPU_IRQ(3), qca956x_ip3_irq_dispatch);
-+
-+ /* QCA956x timer init workaround has to be applied right before setting
-+ * up the clock. Else, there will be no jiffies */
-+ late_time_init = &qca956x_enable_timer_cb;
-+}
-+
- void __init arch_init_irq(void)
- {
- unsigned irq_wb_chan2 = -1;
-@@ -183,7 +264,9 @@ void __init arch_init_irq(void)
- soc_is_ar933x() ||
- soc_is_ar934x() ||
- soc_is_qca953x() ||
-- soc_is_qca955x())
-+ soc_is_qca955x() ||
-+ soc_is_qca956x() ||
-+ soc_is_tp9343())
- misc_is_ar71xx = false;
- else
- BUG();
-@@ -197,4 +280,6 @@ void __init arch_init_irq(void)
- qca953x_irq_init();
- else if (soc_is_qca955x())
- qca955x_irq_init();
-+ else if (soc_is_qca956x() || soc_is_tp9343())
-+ qca956x_irq_init();
- }
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -68,6 +68,21 @@ static const struct ath79_pci_irq qca955
- },
- };
-
-+static const struct ath79_pci_irq qca956x_pci_irq_map[] __initconst = {
-+ {
-+ .bus = 0,
-+ .slot = 0,
-+ .pin = 1,
-+ .irq = ATH79_PCI_IRQ(0),
-+ },
-+ {
-+ .bus = 1,
-+ .slot = 0,
-+ .pin = 1,
-+ .irq = ATH79_PCI_IRQ(1),
-+ },
-+};
-+
- int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
- {
- int irq = -1;
-@@ -86,6 +101,9 @@ int __init pcibios_map_irq(const struct
- } else if (soc_is_qca955x()) {
- ath79_pci_irq_map = qca955x_pci_irq_map;
- ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map);
-+ } else if (soc_is_qca956x()) {
-+ ath79_pci_irq_map = qca956x_pci_irq_map;
-+ ath79_pci_nr_irqs = ARRAY_SIZE(qca956x_pci_irq_map);
- } else {
- pr_crit("pci %s: invalid irq map\n",
- pci_name((struct pci_dev *) dev));
-@@ -303,6 +321,15 @@ int __init ath79_register_pci(void)
- QCA955X_PCI_MEM_SIZE,
- 1,
- ATH79_IP3_IRQ(2));
-+ } else if (soc_is_qca956x()) {
-+ pdev = ath79_register_pci_ar724x(0,
-+ QCA956X_PCI_CFG_BASE1,
-+ QCA956X_PCI_CTRL_BASE1,
-+ QCA956X_PCI_CRP_BASE1,
-+ QCA956X_PCI_MEM_BASE1,
-+ QCA956X_PCI_MEM_SIZE,
-+ 1,
-+ ATH79_IP3_IRQ(2));
- } else {
- /* No PCI support */
- return -ENODEV;
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -176,6 +176,18 @@ static void __init ath79_detect_sys_type
- rev = id & QCA955X_REV_ID_REVISION_MASK;
- break;
-
-+ case REV_ID_MAJOR_QCA956X:
-+ ath79_soc = ATH79_SOC_QCA956X;
-+ chip = "956X";
-+ rev = id & QCA956X_REV_ID_REVISION_MASK;
-+ break;
-+
-+ case REV_ID_MAJOR_TP9343:
-+ ath79_soc = ATH79_SOC_TP9343;
-+ chip = "9343";
-+ rev = id & QCA956X_REV_ID_REVISION_MASK;
-+ break;
-+
- default:
- panic("ath79: unknown SoC, id:0x%08x", id);
- }
-@@ -183,9 +195,12 @@ static void __init ath79_detect_sys_type
- if (ver == 1)
- ath79_soc_rev = rev;
-
-- if (soc_is_qca953x() || soc_is_qca955x())
-+ if (soc_is_qca953x() || soc_is_qca955x() || soc_is_qca956x())
- sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s ver %u rev %u",
- chip, ver, rev);
-+ else if (soc_is_tp9343())
-+ sprintf(ath79_sys_type, "Qualcomm Atheros TP%s rev %u",
-+ chip, rev);
- else
- sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);
- pr_info("SoC: %s\n", ath79_sys_type);
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -143,6 +143,23 @@
- #define QCA955X_NFC_BASE 0x1b800200
- #define QCA955X_NFC_SIZE 0xb8
-
-+#define QCA956X_PCI_MEM_BASE1 0x12000000
-+#define QCA956X_PCI_MEM_SIZE 0x02000000
-+#define QCA956X_PCI_CFG_BASE1 0x16000000
-+#define QCA956X_PCI_CFG_SIZE 0x1000
-+#define QCA956X_PCI_CRP_BASE1 (AR71XX_APB_BASE + 0x00250000)
-+#define QCA956X_PCI_CRP_SIZE 0x1000
-+#define QCA956X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000)
-+#define QCA956X_PCI_CTRL_SIZE 0x100
-+
-+#define QCA956X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
-+#define QCA956X_WMAC_SIZE 0x20000
-+#define QCA956X_EHCI0_BASE 0x1b000000
-+#define QCA956X_EHCI1_BASE 0x1b400000
-+#define QCA956X_EHCI_SIZE 0x200
-+#define QCA956X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define QCA956X_GMAC_SIZE 0x64
-+
- #define AR9300_OTP_BASE 0x14000
- #define AR9300_OTP_STATUS 0x15f18
- #define AR9300_OTP_STATUS_TYPE 0x7
-@@ -152,6 +169,13 @@
- #define AR9300_OTP_READ_DATA 0x15f1c
-
- /*
-+ * Hidden Registers
-+ */
-+#define QCA956X_DAM_RESET_OFFSET 0xb90001bc
-+#define QCA956X_DAM_RESET_SIZE 0x4
-+#define QCA956X_INLINE_CHKSUM_ENG BIT(27)
-+
-+/*
- * DDR_CTRL block
- */
- #define AR71XX_DDR_REG_PCI_WIN0 0x7c
-@@ -385,6 +409,49 @@
- #define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
- #define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-
-+#define QCA956X_PLL_CPU_CONFIG_REG 0x00
-+#define QCA956X_PLL_CPU_CONFIG1_REG 0x04
-+#define QCA956X_PLL_DDR_CONFIG_REG 0x08
-+#define QCA956X_PLL_DDR_CONFIG1_REG 0x0c
-+#define QCA956X_PLL_CLK_CTRL_REG 0x10
-+
-+#define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
-+#define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
-+#define QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19
-+#define QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7
-+
-+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT 0
-+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK 0x1f
-+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT 5
-+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK 0x1fff
-+#define QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT 18
-+#define QCA956X_PLL_CPU_CONFIG1_NINT_MASK 0x1ff
-+
-+#define QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT 16
-+#define QCA956X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f
-+#define QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23
-+#define QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7
-+
-+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT 0
-+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK 0x1f
-+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT 5
-+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK 0x1fff
-+#define QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT 18
-+#define QCA956X_PLL_DDR_CONFIG1_NINT_MASK 0x1ff
-+
-+#define QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2)
-+#define QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3)
-+#define QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4)
-+#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5
-+#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f
-+#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10
-+#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f
-+#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15
-+#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f
-+#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL BIT(20)
-+#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL BIT(21)
-+#define QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-+
- /*
- * USB_CONFIG block
- */
-@@ -432,6 +499,11 @@
- #define QCA955X_RESET_REG_BOOTSTRAP 0xb0
- #define QCA955X_RESET_REG_EXT_INT_STATUS 0xac
-
-+#define QCA956X_RESET_REG_RESET_MODULE 0x1c
-+#define QCA956X_RESET_REG_BOOTSTRAP 0xb0
-+#define QCA956X_RESET_REG_EXT_INT_STATUS 0xac
-+
-+#define MISC_INT_MIPS_SI_TIMERINT_MASK BIT(28)
- #define MISC_INT_ETHSW BIT(12)
- #define MISC_INT_TIMER4 BIT(10)
- #define MISC_INT_TIMER3 BIT(9)
-@@ -606,6 +678,8 @@
-
- #define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4)
-
-+#define QCA956X_BOOTSTRAP_REF_CLK_40 BIT(2)
-+
- #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
- #define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1)
- #define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2)
-@@ -673,6 +747,37 @@
- QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \
- QCA955X_EXT_INT_PCIE_RC2_INT3)
-
-+#define QCA956X_EXT_INT_WMAC_MISC BIT(0)
-+#define QCA956X_EXT_INT_WMAC_TX BIT(1)
-+#define QCA956X_EXT_INT_WMAC_RXLP BIT(2)
-+#define QCA956X_EXT_INT_WMAC_RXHP BIT(3)
-+#define QCA956X_EXT_INT_PCIE_RC1 BIT(4)
-+#define QCA956X_EXT_INT_PCIE_RC1_INT0 BIT(5)
-+#define QCA956X_EXT_INT_PCIE_RC1_INT1 BIT(6)
-+#define QCA956X_EXT_INT_PCIE_RC1_INT2 BIT(7)
-+#define QCA956X_EXT_INT_PCIE_RC1_INT3 BIT(8)
-+#define QCA956X_EXT_INT_PCIE_RC2 BIT(12)
-+#define QCA956X_EXT_INT_PCIE_RC2_INT0 BIT(13)
-+#define QCA956X_EXT_INT_PCIE_RC2_INT1 BIT(14)
-+#define QCA956X_EXT_INT_PCIE_RC2_INT2 BIT(15)
-+#define QCA956X_EXT_INT_PCIE_RC2_INT3 BIT(16)
-+#define QCA956X_EXT_INT_USB1 BIT(24)
-+#define QCA956X_EXT_INT_USB2 BIT(28)
-+
-+#define QCA956X_EXT_INT_WMAC_ALL \
-+ (QCA956X_EXT_INT_WMAC_MISC | QCA956X_EXT_INT_WMAC_TX | \
-+ QCA956X_EXT_INT_WMAC_RXLP | QCA956X_EXT_INT_WMAC_RXHP)
-+
-+#define QCA956X_EXT_INT_PCIE_RC1_ALL \
-+ (QCA956X_EXT_INT_PCIE_RC1 | QCA956X_EXT_INT_PCIE_RC1_INT0 | \
-+ QCA956X_EXT_INT_PCIE_RC1_INT1 | QCA956X_EXT_INT_PCIE_RC1_INT2 | \
-+ QCA956X_EXT_INT_PCIE_RC1_INT3)
-+
-+#define QCA956X_EXT_INT_PCIE_RC2_ALL \
-+ (QCA956X_EXT_INT_PCIE_RC2 | QCA956X_EXT_INT_PCIE_RC2_INT0 | \
-+ QCA956X_EXT_INT_PCIE_RC2_INT1 | QCA956X_EXT_INT_PCIE_RC2_INT2 | \
-+ QCA956X_EXT_INT_PCIE_RC2_INT3)
-+
- #define REV_ID_MAJOR_MASK 0xfff0
- #define REV_ID_MAJOR_AR71XX 0x00a0
- #define REV_ID_MAJOR_AR913X 0x00b0
-@@ -688,6 +793,8 @@
- #define REV_ID_MAJOR_QCA9533_V2 0x0160
- #define REV_ID_MAJOR_QCA9556 0x0130
- #define REV_ID_MAJOR_QCA9558 0x1130
-+#define REV_ID_MAJOR_TP9343 0x0150
-+#define REV_ID_MAJOR_QCA956X 0x1150
-
- #define AR71XX_REV_ID_MINOR_MASK 0x3
- #define AR71XX_REV_ID_MINOR_AR7130 0x0
-@@ -712,6 +819,8 @@
-
- #define QCA955X_REV_ID_REVISION_MASK 0xf
-
-+#define QCA956X_REV_ID_REVISION_MASK 0xf
-+
- /*
- * SPI block
- */
-@@ -784,6 +893,19 @@
- #define QCA955X_GPIO_REG_OUT_FUNC5 0x40
- #define QCA955X_GPIO_REG_FUNC 0x6c
-
-+#define QCA956X_GPIO_REG_OUT_FUNC0 0x2c
-+#define QCA956X_GPIO_REG_OUT_FUNC1 0x30
-+#define QCA956X_GPIO_REG_OUT_FUNC2 0x34
-+#define QCA956X_GPIO_REG_OUT_FUNC3 0x38
-+#define QCA956X_GPIO_REG_OUT_FUNC4 0x3c
-+#define QCA956X_GPIO_REG_OUT_FUNC5 0x40
-+#define QCA956X_GPIO_REG_IN_ENABLE0 0x44
-+#define QCA956X_GPIO_REG_IN_ENABLE3 0x50
-+#define QCA956X_GPIO_REG_FUNC 0x6c
-+
-+#define QCA956X_GPIO_OUT_MUX_GE0_MDO 32
-+#define QCA956X_GPIO_OUT_MUX_GE0_MDC 33
-+
- #define AR71XX_GPIO_COUNT 16
- #define AR7240_GPIO_COUNT 18
- #define AR7241_GPIO_COUNT 20
-@@ -792,6 +914,7 @@
- #define AR934X_GPIO_COUNT 23
- #define QCA953X_GPIO_COUNT 18
- #define QCA955X_GPIO_COUNT 24
-+#define QCA956X_GPIO_COUNT 23
-
- /*
- * SRIF block
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -35,6 +35,8 @@ enum ath79_soc_type {
- ATH79_SOC_QCA9533,
- ATH79_SOC_QCA9556,
- ATH79_SOC_QCA9558,
-+ ATH79_SOC_TP9343,
-+ ATH79_SOC_QCA956X,
- };
-
- extern enum ath79_soc_type ath79_soc;
-@@ -126,6 +128,26 @@ static inline int soc_is_qca955x(void)
- return soc_is_qca9556() || soc_is_qca9558();
- }
-
-+static inline int soc_is_tp9343(void)
-+{
-+ return ath79_soc == ATH79_SOC_TP9343;
-+}
-+
-+static inline int soc_is_qca9561(void)
-+{
-+ return ath79_soc == ATH79_SOC_QCA956X;
-+}
-+
-+static inline int soc_is_qca9563(void)
-+{
-+ return ath79_soc == ATH79_SOC_QCA956X;
-+}
-+
-+static inline int soc_is_qca956x(void)
-+{
-+ return soc_is_qca9561() || soc_is_qca9563();
-+}
-+
- void ath79_ddr_wb_flush(unsigned int reg);
- void ath79_ddr_set_pci_windows(void);
-
+++ /dev/null
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -157,6 +157,10 @@
- #define QCA956X_EHCI0_BASE 0x1b000000
- #define QCA956X_EHCI1_BASE 0x1b400000
- #define QCA956X_EHCI_SIZE 0x200
-+#define QCA956X_GMAC_SGMII_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define QCA956X_GMAC_SGMII_SIZE 0x64
-+#define QCA956X_PLL_BASE (AR71XX_APB_BASE + 0x00050000)
-+#define QCA956X_PLL_SIZE 0x50
- #define QCA956X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
- #define QCA956X_GMAC_SIZE 0x64
-
-@@ -414,6 +418,7 @@
- #define QCA956X_PLL_DDR_CONFIG_REG 0x08
- #define QCA956X_PLL_DDR_CONFIG1_REG 0x0c
- #define QCA956X_PLL_CLK_CTRL_REG 0x10
-+#define QCA956X_PLL_ETH_XMII_CONTROL_REG 0x30
-
- #define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
- #define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
-@@ -1196,4 +1201,16 @@
- #define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3
- #define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20
-
-+/*
-+ * QCA956X GMAC Interface
-+ */
-+
-+#define QCA956X_GMAC_REG_ETH_CFG 0x00
-+
-+#define QCA956X_ETH_CFG_SW_ONLY_MODE BIT(7)
-+#define QCA956X_ETH_CFG_SW_PHY_SWAP BIT(8)
-+#define QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(9)
-+#define QCA956X_ETH_CFG_SW_APB_ACCESS BIT(10)
-+#define QCA956X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13)
-+
- #endif /* __ASM_MACH_AR71XX_REGS_H */
+++ /dev/null
---- a/arch/mips/ath79/irq.c
-+++ b/arch/mips/ath79/irq.c
-@@ -27,6 +27,9 @@
- #include "machtypes.h"
-
-
-+static struct irq_chip ip2_chip;
-+static struct irq_chip ip3_chip;
-+
- static void ar934x_ip2_irq_dispatch(struct irq_desc *desc)
- {
- u32 status;
-@@ -50,8 +53,7 @@ static void ar934x_ip2_irq_init(void)
-
- for (i = ATH79_IP2_IRQ_BASE;
- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-- irq_set_chip_and_handler(i, &dummy_irq_chip,
-- handle_level_irq);
-+ irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq);
-
- irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch);
- }
-@@ -79,7 +81,7 @@ static void qca953x_irq_init(void)
-
- for (i = ATH79_IP2_IRQ_BASE;
- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-- irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
-+ irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq);
-
- irq_set_chained_handler(ATH79_CPU_IRQ(2), qca953x_ip2_irq_dispatch);
- }
-@@ -143,15 +145,13 @@ static void qca955x_irq_init(void)
-
- for (i = ATH79_IP2_IRQ_BASE;
- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-- irq_set_chip_and_handler(i, &dummy_irq_chip,
-- handle_level_irq);
-+ irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq);
-
- irq_set_chained_handler(ATH79_CPU_IRQ(2), qca955x_ip2_irq_dispatch);
-
- for (i = ATH79_IP3_IRQ_BASE;
- i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
-- irq_set_chip_and_handler(i, &dummy_irq_chip,
-- handle_level_irq);
-+ irq_set_chip_and_handler(i, &ip3_chip, handle_level_irq);
-
- irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
- }
-@@ -222,13 +222,13 @@ static void qca956x_irq_init(void)
-
- for (i = ATH79_IP2_IRQ_BASE;
- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-- irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
-+ irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq);
-
- irq_set_chained_handler(ATH79_CPU_IRQ(2), qca956x_ip2_irq_dispatch);
-
- for (i = ATH79_IP3_IRQ_BASE;
- i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
-- irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
-+ irq_set_chip_and_handler(i, &ip3_chip, handle_level_irq);
-
- irq_set_chained_handler(ATH79_CPU_IRQ(3), qca956x_ip3_irq_dispatch);
-
-@@ -237,12 +237,40 @@ static void qca956x_irq_init(void)
- late_time_init = &qca956x_enable_timer_cb;
- }
-
-+static void ath79_ip2_disable(struct irq_data *data)
-+{
-+ disable_irq(ATH79_CPU_IRQ(2));
-+}
-+
-+static void ath79_ip2_enable(struct irq_data *data)
-+{
-+ enable_irq(ATH79_CPU_IRQ(2));
-+}
-+
-+static void ath79_ip3_disable(struct irq_data *data)
-+{
-+ disable_irq(ATH79_CPU_IRQ(3));
-+}
-+
-+static void ath79_ip3_enable(struct irq_data *data)
-+{
-+ enable_irq(ATH79_CPU_IRQ(3));
-+}
-+
- void __init arch_init_irq(void)
- {
- unsigned irq_wb_chan2 = -1;
- unsigned irq_wb_chan3 = -1;
- bool misc_is_ar71xx;
-
-+ ip2_chip = dummy_irq_chip;
-+ ip2_chip.irq_disable = ath79_ip2_disable;
-+ ip2_chip.irq_enable = ath79_ip2_enable;
-+
-+ ip3_chip = dummy_irq_chip;
-+ ip3_chip.irq_disable = ath79_ip3_disable;
-+ ip3_chip.irq_enable = ath79_ip3_enable;
-+
- if (mips_machtype == ATH79_MACH_GENERIC_OF) {
- irqchip_init();
- return;
+++ /dev/null
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -406,6 +406,11 @@ void __init ath79_wmac_set_ext_lna_gpio(
- ar934x_set_ext_lna_gpio(chain, gpio);
- }
-
-+void __init ath79_wmac_set_led_pin(int gpio)
-+{
-+ ath79_wmac_data.led_pin = gpio;
-+}
-+
- void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
- {
- if (soc_is_ar913x())
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -18,6 +18,7 @@ void ath79_wmac_disable_2ghz(void);
- void ath79_wmac_disable_5ghz(void);
- void ath79_wmac_set_tx_gain_buffalo(void);
- void ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio);
-+void ath79_wmac_set_led_pin(int gpio);
-
- bool ar93xx_wmac_read_mac_address(u8 *dest);
-
+++ /dev/null
---- a/arch/mips/ath79/common.h
-+++ b/arch/mips/ath79/common.h
-@@ -28,6 +28,7 @@ void ath79_gpio_function_enable(u32 mask
- void ath79_gpio_function_disable(u32 mask);
- void ath79_gpio_function_setup(u32 set, u32 clear);
- void ath79_gpio_output_select(unsigned gpio, u8 val);
-+int ath79_gpio_direction_select(unsigned gpio, bool oe);
- void ath79_gpio_init(void);
-
- #endif /* __ATH79_COMMON_H */
---- a/arch/mips/ath79/gpio.c
-+++ b/arch/mips/ath79/gpio.c
-@@ -83,3 +83,19 @@ void __init ath79_gpio_output_select(uns
- /* flush write */
- (void) __raw_readl(base + reg);
- }
-+
-+int ath79_gpio_direction_select(unsigned gpio, bool oe)
-+{
-+ void __iomem *base = ath79_gpio_base;
-+ bool ieq_1 = (soc_is_ar934x() ||
-+ soc_is_qca953x());
-+
-+ if ((ieq_1 && oe) || (!ieq_1 && !oe))
-+ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << gpio),
-+ base + AR71XX_GPIO_REG_OE);
-+ else
-+ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) | (1 << gpio),
-+ base + AR71XX_GPIO_REG_OE);
-+
-+ return 0;
-+}
+++ /dev/null
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -38,7 +38,7 @@ unsigned int ath79_soc_rev;
- void __iomem *ath79_pll_base;
- void __iomem *ath79_reset_base;
- EXPORT_SYMBOL_GPL(ath79_reset_base);
--static void __iomem *ath79_ddr_base;
-+void __iomem *ath79_ddr_base;
- static void __iomem *ath79_ddr_wb_flush_base;
- static void __iomem *ath79_ddr_pci_win_base;
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -32,7 +32,7 @@
- #define AR71XX_SPI_SIZE 0x01000000
-
- #define AR71XX_DDR_CTRL_BASE (AR71XX_APB_BASE + 0x00000000)
--#define AR71XX_DDR_CTRL_SIZE 0x100
-+#define AR71XX_DDR_CTRL_SIZE 0x200
- #define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000)
- #define AR71XX_UART_SIZE 0x100
- #define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000)
-@@ -229,6 +229,9 @@
- #define QCA953X_DDR_REG_FLUSH_PCIE 0xa8
- #define QCA953X_DDR_REG_FLUSH_WMAC 0xac
-
-+#define QCA955X_DDR_CTL_CONFIG 0x108
-+#define QCA955X_DDR_CTL_CONFIG_ACT_WMAC BIT(23)
-+
- /*
- * PLL block
- */
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -165,6 +165,27 @@ static void qca953x_wmac_setup(void)
- ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
- }
-
-+static int ar955x_wmac_reset(void)
-+{
-+ int i;
-+
-+ /* Try to wait for WMAC DDR activity to stop */
-+ for (i = 0; i < 10; i++) {
-+ if (!(__raw_readl(ath79_ddr_base + QCA955X_DDR_CTL_CONFIG) &
-+ QCA955X_DDR_CTL_CONFIG_ACT_WMAC))
-+ break;
-+
-+ udelay(10);
-+ }
-+
-+ ath79_device_reset_set(QCA955X_RESET_RTC);
-+ udelay(10);
-+ ath79_device_reset_clear(QCA955X_RESET_RTC);
-+ udelay(10);
-+
-+ return 0;
-+}
-+
- static void qca955x_wmac_setup(void)
- {
- u32 t;
-@@ -181,6 +202,8 @@ static void qca955x_wmac_setup(void)
- ath79_wmac_data.is_clk_25mhz = false;
- else
- ath79_wmac_data.is_clk_25mhz = true;
-+
-+ ath79_wmac_data.external_reset = ar955x_wmac_reset;
- }
-
- #define AR93XX_WMAC_SIZE \
---- a/arch/mips/ath79/common.h
-+++ b/arch/mips/ath79/common.h
-@@ -19,6 +19,8 @@
- #define ATH79_MEM_SIZE_MIN (2 * 1024 * 1024)
- #define ATH79_MEM_SIZE_MAX (256 * 1024 * 1024)
-
-+extern void __iomem *ath79_ddr_base;
-+
- void ath79_clocks_init(void);
- unsigned long ath79_get_sys_clk_rate(const char *id);
-
+++ /dev/null
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -82,6 +82,8 @@ config ATH79_MACH_UBNT_XM
- Say 'Y' here if you want your kernel to support the
- Ubiquiti Networks XM (rev 1.0) board.
-
-+source "arch/mips/ath79/Kconfig.openwrt"
-+
- endmenu
-
- config SOC_AR71XX
+++ /dev/null
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -136,6 +136,32 @@ void __init prom_init(void)
- initrd_end = initrd_start + fw_getenvl("initrd_size");
- }
- #endif
-+
-+ if (strstr(arcs_cmdline, "board=750Gr3") ||
-+ strstr(arcs_cmdline, "board=750i") ||
-+ strstr(arcs_cmdline, "board=750-hb") ||
-+ strstr(arcs_cmdline, "board=411") ||
-+ strstr(arcs_cmdline, "board=433") ||
-+ strstr(arcs_cmdline, "board=435") ||
-+ strstr(arcs_cmdline, "board=450") ||
-+ strstr(arcs_cmdline, "board=493") ||
-+ strstr(arcs_cmdline, "board=951G") ||
-+ strstr(arcs_cmdline, "board=H951L") ||
-+ strstr(arcs_cmdline, "board=952-hb") ||
-+ strstr(arcs_cmdline, "board=953gs") ||
-+ strstr(arcs_cmdline, "board=962") ||
-+ strstr(arcs_cmdline, "board=lhg") ||
-+ strstr(arcs_cmdline, "board=map-hb") ||
-+ strstr(arcs_cmdline, "board=map2-hb") ||
-+ strstr(arcs_cmdline, "board=wap-hb") ||
-+ strstr(arcs_cmdline, "board=wap-lte") ||
-+ strstr(arcs_cmdline, "board=wapg-sc") ||
-+ strstr(arcs_cmdline, "board=2011L") ||
-+ strstr(arcs_cmdline, "board=2011r") ||
-+ strstr(arcs_cmdline, "board=711Gr100") ||
-+ strstr(arcs_cmdline, "board=911L") ||
-+ strstr(arcs_cmdline, "board=922gs"))
-+ ath79_prom_append_cmdline("console", "ttyS0,115200");
- }
-
- void __init prom_free_prom_memory(void)
+++ /dev/null
-From: Gabor Juhos <juhosg@freemail.hu>
-Date: Sat, 2 Dec 2017 19:15:29 +0100
-Subject: [PATCH] MIPS: ath79: fix board detection with newer RouterBOOT versions
-
-Recent RouterBOOT version (at least version 3.41 on RB911G-5HPacD)
-use "Board=" kernel parameter instead of "board=" to pass the board
-name to the kernel. Due to this change the board detection code is
-not working on the devices shipped with the new RouterBOOT version.
-Because the kernel is unable to identify these boards they become
-unusable despite that they are supported by the current code.
-
-Update the prom_init code to convert the 'Board' kernel parameter to
-'board'. After this change, the board detection works also with the
-new RouterBOOT versions.
-
-Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
----
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -104,6 +104,7 @@ static int __init ath79_prom_init_myload
- void __init prom_init(void)
- {
- const char *env;
-+ char *c;
-
- if (ath79_prom_init_myloader())
- return;
-@@ -137,6 +138,15 @@ void __init prom_init(void)
- }
- #endif
-
-+ /*
-+ * RouterBOOT uses "Board" kernel parameter instead of "board" since
-+ * version 3.41 (or so). Replace the first character of the parameter
-+ * to keep board detection working.
-+ */
-+ c = strstr(arcs_cmdline, "Board=");
-+ if (c)
-+ c[0] = 'b';
-+
- if (strstr(arcs_cmdline, "board=750Gr3") ||
- strstr(arcs_cmdline, "board=750i") ||
- strstr(arcs_cmdline, "board=750-hb") ||
+++ /dev/null
---- a/arch/mips/ath79/gpio.c
-+++ b/arch/mips/ath79/gpio.c
-@@ -33,6 +33,7 @@ static void __iomem *ath79_gpio_get_func
- reg = AR71XX_GPIO_REG_FUNC;
- else if (soc_is_ar934x() ||
- soc_is_qca953x() ||
-+ soc_is_qca955x() ||
- soc_is_qca956x() ||
- soc_is_tp9343())
- reg = AR934X_GPIO_REG_FUNC;
-@@ -64,15 +65,21 @@ void ath79_gpio_function_disable(u32 mas
- void __init ath79_gpio_output_select(unsigned gpio, u8 val)
- {
- void __iomem *base = ath79_gpio_base;
-- unsigned int reg;
-+ unsigned int reg, reg_base;
- u32 t, s;
-
-- BUG_ON(!soc_is_ar934x() && !soc_is_qca953x() && !soc_is_qca956x());
--
-- if (gpio >= AR934X_GPIO_COUNT)
-- return;
-+ if (soc_is_ar934x())
-+ reg_base = AR934X_GPIO_REG_OUT_FUNC0;
-+ else if (soc_is_qca953x())
-+ reg_base = QCA953X_GPIO_REG_OUT_FUNC0;
-+ else if (soc_is_qca955x())
-+ reg_base = QCA955X_GPIO_REG_OUT_FUNC0;
-+ else if (soc_is_qca956x())
-+ reg_base = QCA956X_GPIO_REG_OUT_FUNC0;
-+ else
-+ BUG();
-
-- reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4);
-+ reg = reg_base + 4 * (gpio / 4);
- s = 8 * (gpio % 4);
-
- t = __raw_readl(base + reg);
+++ /dev/null
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -53,6 +53,15 @@ static const struct ath79_pci_irq ar724x
- }
- };
-
-+static const struct ath79_pci_irq qca953x_pci_irq_map[] __initconst = {
-+ {
-+ .bus = 0,
-+ .slot = 0,
-+ .pin = 1,
-+ .irq = ATH79_PCI_IRQ(0),
-+ },
-+};
-+
- static const struct ath79_pci_irq qca955x_pci_irq_map[] __initconst = {
- {
- .bus = 0,
-@@ -98,6 +107,9 @@ int __init pcibios_map_irq(const struct
- soc_is_ar9344()) {
- ath79_pci_irq_map = ar724x_pci_irq_map;
- ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
-+ } else if (soc_is_qca953x()) {
-+ ath79_pci_irq_map = qca953x_pci_irq_map;
-+ ath79_pci_nr_irqs = ARRAY_SIZE(qca953x_pci_irq_map);
- } else if (soc_is_qca955x()) {
- ath79_pci_irq_map = qca955x_pci_irq_map;
- ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map);
-@@ -303,6 +315,15 @@ int __init ath79_register_pci(void)
- AR724X_PCI_MEM_SIZE,
- 0,
- ATH79_IP2_IRQ(0));
-+ } else if (soc_is_qca9533()) {
-+ pdev = ath79_register_pci_ar724x(0,
-+ QCA953X_PCI_CFG_BASE0,
-+ QCA953X_PCI_CTRL_BASE0,
-+ QCA953X_PCI_CRP_BASE0,
-+ QCA953X_PCI_MEM_BASE0,
-+ QCA953X_PCI_MEM_SIZE,
-+ 0,
-+ ATH79_IP2_IRQ(0));
- } else if (soc_is_qca9558()) {
- pdev = ath79_register_pci_ar724x(0,
- QCA955X_PCI_CFG_BASE0,
+++ /dev/null
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -324,7 +324,8 @@ int __init ath79_register_pci(void)
- QCA953X_PCI_MEM_SIZE,
- 0,
- ATH79_IP2_IRQ(0));
-- } else if (soc_is_qca9558()) {
-+ } else if (soc_is_qca9558() ||
-+ soc_is_qca9556()) {
- pdev = ath79_register_pci_ar724x(0,
- QCA955X_PCI_CFG_BASE0,
- QCA955X_PCI_CTRL_BASE0,
+++ /dev/null
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -606,6 +606,13 @@ config LEDS_IS31FL32XX
-
- comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
-
-+config LEDS_NU801
-+ tristate "LED driver for NU801 RGB LED"
-+ depends on LEDS_CLASS && (ATH79_MACH_MR18 || ATH79_MACH_Z1)
-+ help
-+ This option enables support for NU801 RGB LED driver chips
-+ accessed via GPIO.
-+
- config LEDS_BLINKM
- tristate "LED support for the BlinkM I2C RGB LED"
- depends on LEDS_CLASS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -56,6 +56,7 @@ obj-$(CONFIG_LEDS_ADP5520) += leds-adp5
- obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o
- obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
- obj-$(CONFIG_LEDS_RB750) += leds-rb750.o
-+obj-$(CONFIG_LEDS_NU801) += leds-nu801.o
- obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
- obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
- obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
+++ /dev/null
-Add access to the function2 gpio register. This probably has to be
-converted into a pimux driver later on. This is needed for some setup
-functions on the Arduino Yun.
-
---- a/arch/mips/ath79/common.h
-+++ b/arch/mips/ath79/common.h
-@@ -29,6 +29,7 @@ void ath79_ddr_ctrl_init(void);
- void ath79_gpio_function_enable(u32 mask);
- void ath79_gpio_function_disable(u32 mask);
- void ath79_gpio_function_setup(u32 set, u32 clear);
-+void ath79_gpio_function2_setup(u32 set, u32 clear);
- void ath79_gpio_output_select(unsigned gpio, u8 val);
- int ath79_gpio_direction_select(unsigned gpio, bool oe);
- void ath79_gpio_init(void);
---- a/arch/mips/ath79/gpio.c
-+++ b/arch/mips/ath79/gpio.c
-@@ -43,6 +43,31 @@ static void __iomem *ath79_gpio_get_func
- return ath79_gpio_base + reg;
- }
-
-+static void __iomem *ath79_gpio_get_function2_reg(void)
-+{
-+ u32 reg = 0;
-+
-+ if (soc_is_ar71xx() ||
-+ soc_is_ar724x() ||
-+ soc_is_ar913x() ||
-+ soc_is_ar933x())
-+ reg = AR71XX_GPIO_REG_FUNC_2;
-+ else
-+ BUG();
-+
-+ return ath79_gpio_base + reg;
-+}
-+
-+
-+void ath79_gpio_function2_setup(u32 set, u32 clear)
-+{
-+ void __iomem *reg = ath79_gpio_get_function2_reg();
-+
-+ __raw_writel((__raw_readl(reg) & ~clear) | set, reg);
-+ /* flush write */
-+ __raw_readl(reg);
-+}
-+
- void ath79_gpio_function_setup(u32 set, u32 clear)
- {
- void __iomem *reg = ath79_gpio_get_function_reg();
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -865,6 +865,7 @@
- #define AR71XX_GPIO_REG_INT_PENDING 0x20
- #define AR71XX_GPIO_REG_INT_ENABLE 0x24
- #define AR71XX_GPIO_REG_FUNC 0x28
-+#define AR71XX_GPIO_REG_FUNC_2 0x30
-
- #define AR934X_GPIO_REG_OUT_FUNC0 0x2c
- #define AR934X_GPIO_REG_OUT_FUNC1 0x30
-@@ -989,6 +990,8 @@
- #define AR724X_GPIO_FUNC_UART_EN BIT(1)
- #define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0)
-
-+#define AR933X_GPIO_FUNC2_JUMPSTART_DISABLE BIT(9)
-+
- #define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22)
- #define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21)
- #define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20)
+++ /dev/null
---- a/drivers/net/phy/mdio-bitbang.c
-+++ b/drivers/net/phy/mdio-bitbang.c
-@@ -155,7 +155,7 @@ static int mdiobb_cmd_addr(struct mdiobb
- static int mdiobb_read(struct mii_bus *bus, int phy, int reg)
- {
- struct mdiobb_ctrl *ctrl = bus->priv;
-- int ret, i;
-+ int ret;
-
- if (reg & MII_ADDR_C45) {
- reg = mdiobb_cmd_addr(ctrl, phy, reg);
-@@ -165,19 +165,7 @@ static int mdiobb_read(struct mii_bus *b
-
- ctrl->ops->set_mdio_dir(ctrl, 0);
-
-- /* check the turnaround bit: the PHY should be driving it to zero, if this
-- * PHY is listed in phy_ignore_ta_mask as having broken TA, skip that
-- */
-- if (mdiobb_get_bit(ctrl) != 0 &&
-- !(bus->phy_ignore_ta_mask & (1 << phy))) {
-- /* PHY didn't drive TA low -- flush any bits it
-- * may be trying to send.
-- */
-- for (i = 0; i < 32; i++)
-- mdiobb_get_bit(ctrl);
--
-- return 0xffff;
-- }
-+ mdiobb_get_bit(ctrl);
-
- ret = mdiobb_get_num(ctrl, 16);
- mdiobb_get_bit(ctrl);
+++ /dev/null
-From 66e584435ac0de6e0abeb6d7166fe4fe25d6bb73 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 16 Jun 2015 13:15:08 +0200
-Subject: [PATCH] phy/mdio-bitbang: prevent rescheduling during command
-
-It seems some phys have some maximum timings for accessing the MDIO line,
-resulting in bit errors under cpu stress. Prevent this from happening by
-disabling interrupts when sending commands.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/net/phy/mdio-bitbang.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/net/phy/mdio-bitbang.c
-+++ b/drivers/net/phy/mdio-bitbang.c
-@@ -17,6 +17,7 @@
- * kind, whether express or implied.
- */
-
-+#include <linux/irqflags.h>
- #include <linux/module.h>
- #include <linux/mdio-bitbang.h>
- #include <linux/types.h>
-@@ -156,7 +157,9 @@ static int mdiobb_read(struct mii_bus *b
- {
- struct mdiobb_ctrl *ctrl = bus->priv;
- int ret;
-+ unsigned long flags;
-
-+ local_irq_save(flags);
- if (reg & MII_ADDR_C45) {
- reg = mdiobb_cmd_addr(ctrl, phy, reg);
- mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
-@@ -169,13 +172,17 @@ static int mdiobb_read(struct mii_bus *b
-
- ret = mdiobb_get_num(ctrl, 16);
- mdiobb_get_bit(ctrl);
-+ local_irq_restore(flags);
-+
- return ret;
- }
-
- static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
- {
- struct mdiobb_ctrl *ctrl = bus->priv;
-+ unsigned long flags;
-
-+ local_irq_save(flags);
- if (reg & MII_ADDR_C45) {
- reg = mdiobb_cmd_addr(ctrl, phy, reg);
- mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
-@@ -190,6 +197,8 @@ static int mdiobb_write(struct mii_bus *
-
- ctrl->ops->set_mdio_dir(ctrl, 0);
- mdiobb_get_bit(ctrl);
-+ local_irq_restore(flags);
-+
- return 0;
- }
-
+++ /dev/null
-Add support for configuring AT803x GPIO reset via platform data.
-This is necessary, because ath79 is not converted to device tree yet.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
---- a/include/linux/platform_data/phy-at803x.h
-+++ b/include/linux/platform_data/phy-at803x.h
-@@ -6,6 +6,8 @@ struct at803x_platform_data {
- int enable_rgmii_tx_delay:1;
- int enable_rgmii_rx_delay:1;
- int fixup_rgmii_tx_delay:1;
-+ int has_reset_gpio:1;
-+ int reset_gpio;
- };
-
- #endif /* _PHY_AT803X_PDATA_H */
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -261,6 +261,7 @@ static int at803x_resume(struct phy_devi
-
- static int at803x_probe(struct phy_device *phydev)
- {
-+ struct at803x_platform_data *pdata;
- struct device *dev = &phydev->mdio.dev;
- struct at803x_priv *priv;
- struct gpio_desc *gpiod_reset;
-@@ -273,6 +274,12 @@ static int at803x_probe(struct phy_devic
- phydev->drv->phy_id != ATH8032_PHY_ID)
- goto does_not_require_reset_workaround;
-
-+ pdata = dev_get_platdata(dev);
-+ if (pdata && pdata->has_reset_gpio) {
-+ devm_gpio_request(dev, pdata->reset_gpio, "reset");
-+ gpio_direction_output(pdata->reset_gpio, 1);
-+ }
-+
- gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
- if (IS_ERR(gpiod_reset))
- return PTR_ERR(gpiod_reset);
-@@ -404,15 +411,23 @@ static void at803x_link_change_notify(st
- * cannot recover from by software.
- */
- if (phydev->state == PHY_NOLINK) {
-- if (priv->gpiod_reset && !priv->phy_reset) {
-+ if ((priv->gpiod_reset || (pdata && pdata->has_reset_gpio)) &&
-+ !priv->phy_reset) {
- struct at803x_context context;
-
- at803x_context_save(phydev, &context);
-
-- gpiod_set_value(priv->gpiod_reset, 1);
-- msleep(1);
-- gpiod_set_value(priv->gpiod_reset, 0);
-- msleep(1);
-+ if (pdata && pdata->has_reset_gpio) {
-+ gpio_set_value_cansleep(pdata->reset_gpio, 0);
-+ msleep(1);
-+ gpio_set_value_cansleep(pdata->reset_gpio, 1);
-+ msleep(1);
-+ } else {
-+ gpiod_set_value(priv->gpiod_reset, 1);
-+ msleep(1);
-+ gpiod_set_value(priv->gpiod_reset, 0);
-+ msleep(1);
-+ }
-
- at803x_context_restore(phydev, &context);
-
+++ /dev/null
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -460,12 +460,15 @@ static void at803x_link_change_notify(st
-
- static int at803x_aneg_done(struct phy_device *phydev)
- {
-+ struct at803x_platform_data *pdata;
- int ccr;
-
- int aneg_done = genphy_aneg_done(phydev);
- if (aneg_done != BMSR_ANEGCOMPLETE)
- return aneg_done;
-
-+ pdata = dev_get_platdata(&phydev->mdio.dev);
-+
- /*
- * in SGMII mode, if copper side autoneg is successful,
- * also check SGMII side autoneg result
-@@ -480,7 +483,8 @@ static int at803x_aneg_done(struct phy_d
- /* check if the SGMII link is OK. */
- if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) {
- pr_warn("803x_aneg_done: SGMII link is not ok\n");
-- aneg_done = 0;
-+ if (!pdata || !pdata->override_sgmii_aneg)
-+ aneg_done = 0;
- }
- /* switch back to copper page */
- phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
---- a/include/linux/platform_data/phy-at803x.h
-+++ b/include/linux/platform_data/phy-at803x.h
-@@ -7,6 +7,7 @@ struct at803x_platform_data {
- int enable_rgmii_rx_delay:1;
- int fixup_rgmii_tx_delay:1;
- int has_reset_gpio:1;
-+ int override_sgmii_aneg:1;
- int reset_gpio;
- };
-
+++ /dev/null
---- a/arch/mips/include/asm/checksum.h
-+++ b/arch/mips/include/asm/checksum.h
-@@ -134,26 +134,30 @@ static inline __sum16 ip_fast_csum(const
- const unsigned int *stop = word + ihl;
- unsigned int csum;
- int carry;
-+ unsigned int w;
-
-- csum = word[0];
-- csum += word[1];
-- carry = (csum < word[1]);
-+ csum = net_hdr_word(word++);
-+
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-
-- csum += word[2];
-- carry = (csum < word[2]);
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-
-- csum += word[3];
-- carry = (csum < word[3]);
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-
-- word += 4;
- do {
-- csum += *word;
-- carry = (csum < *word);
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-- word++;
- } while (word != stop);
-
- return csum_fold(csum);
-@@ -214,73 +218,6 @@ static inline __sum16 ip_compute_csum(co
- return csum_fold(csum_partial(buff, len, 0));
- }
-
--#define _HAVE_ARCH_IPV6_CSUM
--static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
-- const struct in6_addr *daddr,
-- __u32 len, __u8 proto,
-- __wsum sum)
--{
-- __wsum tmp;
--
-- __asm__(
-- " .set push # csum_ipv6_magic\n"
-- " .set noreorder \n"
-- " .set noat \n"
-- " addu %0, %5 # proto (long in network byte order)\n"
-- " sltu $1, %0, %5 \n"
-- " addu %0, $1 \n"
--
-- " addu %0, %6 # csum\n"
-- " sltu $1, %0, %6 \n"
-- " lw %1, 0(%2) # four words source address\n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 4(%2) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 8(%2) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 12(%2) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 0(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 4(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 8(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 12(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " addu %0, $1 # Add final carry\n"
-- " .set pop"
-- : "=&r" (sum), "=&r" (tmp)
-- : "r" (saddr), "r" (daddr),
-- "0" (htonl(len)), "r" (htonl(proto)), "r" (sum));
--
-- return csum_fold(sum);
--}
--
- #include <asm-generic/checksum.h>
- #endif /* CONFIG_GENERIC_CSUM */
-
---- a/include/uapi/linux/ip.h
-+++ b/include/uapi/linux/ip.h
-@@ -102,7 +102,7 @@ struct iphdr {
- __be32 saddr;
- __be32 daddr;
- /*The options start here. */
--};
-+} __attribute__((packed, aligned(2)));
-
-
- struct ip_auth_hdr {
---- a/include/uapi/linux/ipv6.h
-+++ b/include/uapi/linux/ipv6.h
-@@ -129,7 +129,7 @@ struct ipv6hdr {
-
- struct in6_addr saddr;
- struct in6_addr daddr;
--};
-+} __attribute__((packed, aligned(2)));
-
-
- /* index values for the variables in ipv6_devconf */
---- a/include/uapi/linux/tcp.h
-+++ b/include/uapi/linux/tcp.h
-@@ -54,7 +54,7 @@ struct tcphdr {
- __be16 window;
- __sum16 check;
- __be16 urg_ptr;
--};
-+} __attribute__((packed, aligned(2)));
-
- /*
- * The union cast uses a gcc extension to avoid aliasing problems
-@@ -64,7 +64,7 @@ struct tcphdr {
- union tcp_word_hdr {
- struct tcphdr hdr;
- __be32 words[5];
--};
-+} __attribute__((packed, aligned(2)));
-
- #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3])
-
---- a/include/uapi/linux/udp.h
-+++ b/include/uapi/linux/udp.h
-@@ -24,7 +24,7 @@ struct udphdr {
- __be16 dest;
- __be16 len;
- __sum16 check;
--};
-+} __attribute__((packed, aligned(2)));
-
- /* UDP socket options */
- #define UDP_CORK 1 /* Never send partially complete segments */
---- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
-+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
-@@ -41,8 +41,8 @@ static bool ipv4_pkt_to_tuple(const stru
- if (ap == NULL)
- return false;
-
-- tuple->src.u3.ip = ap[0];
-- tuple->dst.u3.ip = ap[1];
-+ tuple->src.u3.ip = net_hdr_word(ap++);
-+ tuple->dst.u3.ip = net_hdr_word(ap);
-
- return true;
- }
---- a/include/uapi/linux/icmp.h
-+++ b/include/uapi/linux/icmp.h
-@@ -81,7 +81,7 @@ struct icmphdr {
- } frag;
- __u8 reserved[4];
- } un;
--};
-+} __attribute__((packed, aligned(2)));
-
-
- /*
---- a/include/uapi/linux/in6.h
-+++ b/include/uapi/linux/in6.h
-@@ -42,7 +42,7 @@ struct in6_addr {
- #define s6_addr16 in6_u.u6_addr16
- #define s6_addr32 in6_u.u6_addr32
- #endif
--};
-+} __attribute__((packed, aligned(2)));
- #endif /* __UAPI_DEF_IN6_ADDR */
-
- #if __UAPI_DEF_SOCKADDR_IN6
---- a/net/ipv6/tcp_ipv6.c
-+++ b/net/ipv6/tcp_ipv6.c
-@@ -39,6 +39,7 @@
- #include <linux/ipsec.h>
- #include <linux/times.h>
- #include <linux/slab.h>
-+#include <asm/unaligned.h>
- #include <linux/uaccess.h>
- #include <linux/ipv6.h>
- #include <linux/icmpv6.h>
-@@ -796,10 +797,10 @@ static void tcp_v6_send_response(const s
- topt = (__be32 *)(t1 + 1);
-
- if (tsecr) {
-- *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-- (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP);
-- *topt++ = htonl(tsval);
-- *topt++ = htonl(tsecr);
-+ put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++);
-+ put_unaligned_be32(tsval, topt++);
-+ put_unaligned_be32(tsecr, topt++);
- }
-
- #ifdef CONFIG_TCP_MD5SIG
---- a/include/linux/ipv6.h
-+++ b/include/linux/ipv6.h
-@@ -5,6 +5,7 @@
-
- #define ipv6_optlen(p) (((p)->hdrlen+1) << 3)
- #define ipv6_authlen(p) (((p)->hdrlen+2) << 2)
-+
- /*
- * This structure contains configuration options per IPv6 link.
- */
---- a/net/ipv6/datagram.c
-+++ b/net/ipv6/datagram.c
-@@ -471,7 +471,7 @@ int ipv6_recv_error(struct sock *sk, str
- ipv6_iface_scope_id(&sin->sin6_addr,
- IP6CB(skb)->iif);
- } else {
-- ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset),
-+ ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset),
- &sin->sin6_addr);
- sin->sin6_scope_id = 0;
- }
-@@ -817,12 +817,12 @@ int ip6_datagram_send_ctl(struct net *ne
- }
-
- if (fl6->flowlabel&IPV6_FLOWINFO_MASK) {
-- if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) {
-+ if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) {
- err = -EINVAL;
- goto exit_f;
- }
- }
-- fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg);
-+ fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg));
- break;
-
- case IPV6_2292HOPOPTS:
---- a/net/ipv6/ip6_gre.c
-+++ b/net/ipv6/ip6_gre.c
-@@ -397,7 +397,7 @@ static void ip6gre_err(struct sk_buff *s
- return;
- ipv6h = (const struct ipv6hdr *)skb->data;
- greh = (const struct gre_base_hdr *)(skb->data + offset);
-- key = key_off ? *(__be32 *)(skb->data + key_off) : 0;
-+ key = key_off ? net_hdr_word((__be32 *)(skb->data + key_off)) : 0;
-
- t = ip6gre_tunnel_lookup(skb->dev, &ipv6h->daddr, &ipv6h->saddr,
- key, greh->protocol);
---- a/net/ipv6/exthdrs.c
-+++ b/net/ipv6/exthdrs.c
-@@ -574,7 +574,7 @@ static bool ipv6_hop_jumbo(struct sk_buf
- goto drop;
- }
-
-- pkt_len = ntohl(*(__be32 *)(nh + optoff + 2));
-+ pkt_len = ntohl(net_hdr_word(nh + optoff + 2));
- if (pkt_len <= IPV6_MAXPLEN) {
- __IP6_INC_STATS(net, ipv6_skb_idev(skb),
- IPSTATS_MIB_INHDRERRORS);
---- a/include/linux/types.h
-+++ b/include/linux/types.h
-@@ -231,5 +231,11 @@ typedef void (*call_rcu_func_t)(struct r
- /* clocksource cycle base type */
- typedef u64 cycle_t;
-
-+struct net_hdr_word {
-+ u32 words[1];
-+} __attribute__((packed, aligned(2)));
-+
-+#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0])
-+
- #endif /* __ASSEMBLY__ */
- #endif /* _LINUX_TYPES_H */
---- a/net/ipv4/af_inet.c
-+++ b/net/ipv4/af_inet.c
-@@ -1319,8 +1319,8 @@ struct sk_buff **inet_gro_receive(struct
- if (unlikely(ip_fast_csum((u8 *)iph, 5)))
- goto out_unlock;
-
-- id = ntohl(*(__be32 *)&iph->id);
-- flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id & ~IP_DF));
-+ id = ntohl(net_hdr_word(&iph->id));
-+ flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id & ~IP_DF));
- id >>= 16;
-
- for (p = *head; p; p = p->next) {
---- a/net/ipv4/route.c
-+++ b/net/ipv4/route.c
-@@ -461,7 +461,7 @@ static struct neighbour *ipv4_neigh_look
- else if (skb)
- pkey = &ip_hdr(skb)->daddr;
-
-- n = __ipv4_neigh_lookup(dev, *(__force u32 *)pkey);
-+ n = __ipv4_neigh_lookup(dev, net_hdr_word(pkey));
- if (n)
- return n;
- return neigh_create(&arp_tbl, pkey, dev);
---- a/net/ipv4/tcp_output.c
-+++ b/net/ipv4/tcp_output.c
-@@ -453,48 +453,53 @@ static void tcp_options_write(__be32 *pt
- u16 options = opts->options; /* mungable copy */
-
- if (unlikely(OPTION_MD5 & options)) {
-- *ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-- (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+ (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
- /* overload cookie hash location */
- opts->hash_location = (__u8 *)ptr;
- ptr += 4;
- }
-
- if (unlikely(opts->mss)) {
-- *ptr++ = htonl((TCPOPT_MSS << 24) |
-- (TCPOLEN_MSS << 16) |
-- opts->mss);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) |
-+ opts->mss);
- }
-
- if (likely(OPTION_TS & options)) {
- if (unlikely(OPTION_SACK_ADVERTISE & options)) {
-- *ptr++ = htonl((TCPOPT_SACK_PERM << 24) |
-- (TCPOLEN_SACK_PERM << 16) |
-- (TCPOPT_TIMESTAMP << 8) |
-- TCPOLEN_TIMESTAMP);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_SACK_PERM << 24) |
-+ (TCPOLEN_SACK_PERM << 16) |
-+ (TCPOPT_TIMESTAMP << 8) |
-+ TCPOLEN_TIMESTAMP);
- options &= ~OPTION_SACK_ADVERTISE;
- } else {
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_NOP << 16) |
-- (TCPOPT_TIMESTAMP << 8) |
-- TCPOLEN_TIMESTAMP);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_NOP << 16) |
-+ (TCPOPT_TIMESTAMP << 8) |
-+ TCPOLEN_TIMESTAMP);
- }
-- *ptr++ = htonl(opts->tsval);
-- *ptr++ = htonl(opts->tsecr);
-+ net_hdr_word(ptr++) = htonl(opts->tsval);
-+ net_hdr_word(ptr++) = htonl(opts->tsecr);
- }
-
- if (unlikely(OPTION_SACK_ADVERTISE & options)) {
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_NOP << 16) |
-- (TCPOPT_SACK_PERM << 8) |
-- TCPOLEN_SACK_PERM);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_NOP << 16) |
-+ (TCPOPT_SACK_PERM << 8) |
-+ TCPOLEN_SACK_PERM);
- }
-
- if (unlikely(OPTION_WSCALE & options)) {
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_WINDOW << 16) |
-- (TCPOLEN_WINDOW << 8) |
-- opts->ws);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_WINDOW << 16) |
-+ (TCPOLEN_WINDOW << 8) |
-+ opts->ws);
- }
-
- if (unlikely(opts->num_sack_blocks)) {
-@@ -502,16 +507,17 @@ static void tcp_options_write(__be32 *pt
- tp->duplicate_sack : tp->selective_acks;
- int this_sack;
-
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_NOP << 16) |
-- (TCPOPT_SACK << 8) |
-- (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_NOP << 16) |
-+ (TCPOPT_SACK << 8) |
-+ (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
- TCPOLEN_SACK_PERBLOCK)));
-
- for (this_sack = 0; this_sack < opts->num_sack_blocks;
- ++this_sack) {
-- *ptr++ = htonl(sp[this_sack].start_seq);
-- *ptr++ = htonl(sp[this_sack].end_seq);
-+ net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq);
-+ net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq);
- }
-
- tp->rx_opt.dsack = 0;
-@@ -524,13 +530,14 @@ static void tcp_options_write(__be32 *pt
-
- if (foc->exp) {
- len = TCPOLEN_EXP_FASTOPEN_BASE + foc->len;
-- *ptr = htonl((TCPOPT_EXP << 24) | (len << 16) |
-+ net_hdr_word(ptr) =
-+ htonl((TCPOPT_EXP << 24) | (len << 16) |
- TCPOPT_FASTOPEN_MAGIC);
- p += TCPOLEN_EXP_FASTOPEN_BASE;
- } else {
- len = TCPOLEN_FASTOPEN_BASE + foc->len;
-- *p++ = TCPOPT_FASTOPEN;
-- *p++ = len;
-+ net_hdr_word(p++) = TCPOPT_FASTOPEN;
-+ net_hdr_word(p++) = len;
- }
-
- memcpy(p, foc->val, foc->len);
---- a/net/ipv4/igmp.c
-+++ b/net/ipv4/igmp.c
-@@ -537,7 +537,7 @@ static struct sk_buff *add_grec(struct s
- if (!skb)
- return NULL;
- psrc = (__be32 *)skb_put(skb, sizeof(__be32));
-- *psrc = psf->sf_inaddr;
-+ net_hdr_word(psrc) = psf->sf_inaddr;
- scount++; stotal++;
- if ((type == IGMPV3_ALLOW_NEW_SOURCES ||
- type == IGMPV3_BLOCK_OLD_SOURCES) && psf->sf_crcount) {
---- a/include/uapi/linux/igmp.h
-+++ b/include/uapi/linux/igmp.h
-@@ -32,7 +32,7 @@ struct igmphdr {
- __u8 code; /* For newer IGMP */
- __sum16 csum;
- __be32 group;
--};
-+} __attribute__((packed, aligned(2)));
-
- /* V3 group record types [grec_type] */
- #define IGMPV3_MODE_IS_INCLUDE 1
-@@ -48,7 +48,7 @@ struct igmpv3_grec {
- __be16 grec_nsrcs;
- __be32 grec_mca;
- __be32 grec_src[0];
--};
-+} __attribute__((packed, aligned(2)));
-
- struct igmpv3_report {
- __u8 type;
-@@ -57,7 +57,7 @@ struct igmpv3_report {
- __be16 resv2;
- __be16 ngrec;
- struct igmpv3_grec grec[0];
--};
-+} __attribute__((packed, aligned(2)));
-
- struct igmpv3_query {
- __u8 type;
-@@ -78,7 +78,7 @@ struct igmpv3_query {
- __u8 qqic;
- __be16 nsrcs;
- __be32 srcs[0];
--};
-+} __attribute__((packed, aligned(2)));
-
- #define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */
- #define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */
---- a/net/core/flow_dissector.c
-+++ b/net/core/flow_dissector.c
-@@ -84,7 +84,7 @@ __be32 __skb_flow_get_ports(const struct
- ports = __skb_header_pointer(skb, thoff + poff,
- sizeof(_ports), data, hlen, &_ports);
- if (ports)
-- return *ports;
-+ return (__be32)net_hdr_word(ports);
- }
-
- return 0;
---- a/include/uapi/linux/icmpv6.h
-+++ b/include/uapi/linux/icmpv6.h
-@@ -76,7 +76,7 @@ struct icmp6hdr {
- #define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other
- #define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime
- #define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref
--};
-+} __attribute__((packed, aligned(2)));
-
-
- #define ICMPV6_ROUTER_PREF_LOW 0x3
---- a/include/net/ndisc.h
-+++ b/include/net/ndisc.h
-@@ -87,7 +87,7 @@ struct ra_msg {
- struct icmp6hdr icmph;
- __be32 reachable_time;
- __be32 retrans_timer;
--};
-+} __attribute__((packed, aligned(2)));
-
- struct rd_msg {
- struct icmp6hdr icmph;
-@@ -365,10 +365,10 @@ static inline u32 ndisc_hashfn(const voi
- {
- const u32 *p32 = pkey;
-
-- return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) +
-- (p32[1] * hash_rnd[1]) +
-- (p32[2] * hash_rnd[2]) +
-- (p32[3] * hash_rnd[3]));
-+ return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) +
-+ (net_hdr_word(&p32[1]) * hash_rnd[1]) +
-+ (net_hdr_word(&p32[2]) * hash_rnd[2]) +
-+ (net_hdr_word(&p32[3]) * hash_rnd[3]));
- }
-
- static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey)
---- a/net/sched/cls_u32.c
-+++ b/net/sched/cls_u32.c
-@@ -159,7 +159,7 @@ next_knode:
- data = skb_header_pointer(skb, toff, 4, &hdata);
- if (!data)
- goto out;
-- if ((*data ^ key->val) & key->mask) {
-+ if ((net_hdr_word(data) ^ key->val) & key->mask) {
- n = rcu_dereference_bh(n->next);
- goto next_knode;
- }
-@@ -212,8 +212,8 @@ check_terminal:
- &hdata);
- if (!data)
- goto out;
-- sel = ht->divisor & u32_hash_fold(*data, &n->sel,
-- n->fshift);
-+ sel = ht->divisor & u32_hash_fold(net_hdr_word(data),
-+ &n->sel, n->fshift);
- }
- if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT)))
- goto next_ht;
---- a/net/ipv6/ip6_offload.c
-+++ b/net/ipv6/ip6_offload.c
-@@ -221,7 +221,7 @@ static struct sk_buff **ipv6_gro_receive
- continue;
-
- iph2 = (struct ipv6hdr *)(p->data + off);
-- first_word = *(__be32 *)iph ^ *(__be32 *)iph2;
-+ first_word = net_hdr_word(iph) ^ net_hdr_word(iph2);
-
- /* All fields must match except length and Traffic Class.
- * XXX skbs on the gro_list have all been parsed and pulled
---- a/include/net/addrconf.h
-+++ b/include/net/addrconf.h
-@@ -46,7 +46,7 @@ struct prefix_info {
- __be32 reserved2;
-
- struct in6_addr prefix;
--};
-+} __attribute__((packed, aligned(2)));
-
-
- #include <linux/netdevice.h>
---- a/include/net/inet_ecn.h
-+++ b/include/net/inet_ecn.h
-@@ -124,9 +124,9 @@ static inline int IP6_ECN_set_ce(struct
- if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph)))
- return 0;
-
-- from = *(__be32 *)iph;
-+ from = net_hdr_word(iph);
- to = from | htonl(INET_ECN_CE << 20);
-- *(__be32 *)iph = to;
-+ net_hdr_word(iph) = to;
- if (skb->ip_summed == CHECKSUM_COMPLETE)
- skb->csum = csum_add(csum_sub(skb->csum, (__force __wsum)from),
- (__force __wsum)to);
-@@ -135,7 +135,7 @@ static inline int IP6_ECN_set_ce(struct
-
- static inline void IP6_ECN_clear(struct ipv6hdr *iph)
- {
-- *(__be32*)iph &= ~htonl(INET_ECN_MASK << 20);
-+ net_hdr_word(iph) &= ~htonl(INET_ECN_MASK << 20);
- }
-
- static inline void ipv6_copy_dscp(unsigned int dscp, struct ipv6hdr *inner)
---- a/include/net/ipv6.h
-+++ b/include/net/ipv6.h
-@@ -107,7 +107,7 @@ struct frag_hdr {
- __u8 reserved;
- __be16 frag_off;
- __be32 identification;
--};
-+} __attribute__((packed, aligned(2)));
-
- #define IP6_MF 0x0001
- #define IP6_OFFSET 0xFFF8
-@@ -443,8 +443,8 @@ static inline void __ipv6_addr_set_half(
- }
- #endif
- #endif
-- addr[0] = wh;
-- addr[1] = wl;
-+ net_hdr_word(&addr[0]) = wh;
-+ net_hdr_word(&addr[1]) = wl;
- }
-
- static inline void ipv6_addr_set(struct in6_addr *addr,
-@@ -503,6 +503,8 @@ static inline bool ipv6_prefix_equal(con
- const __be32 *a1 = addr1->s6_addr32;
- const __be32 *a2 = addr2->s6_addr32;
- unsigned int pdw, pbi;
-+ /* Used for last <32-bit fraction of prefix */
-+ u32 pbia1, pbia2;
-
- /* check complete u32 in prefix */
- pdw = prefixlen >> 5;
-@@ -511,7 +513,9 @@ static inline bool ipv6_prefix_equal(con
-
- /* check incomplete u32 in prefix */
- pbi = prefixlen & 0x1f;
-- if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi))))
-+ pbia1 = net_hdr_word(&a1[pdw]);
-+ pbia2 = net_hdr_word(&a2[pdw]);
-+ if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi))))
- return false;
-
- return true;
-@@ -655,13 +659,13 @@ static inline void ipv6_addr_set_v4mappe
- */
- static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen)
- {
-- const __be32 *a1 = token1, *a2 = token2;
-+ const struct in6_addr *a1 = token1, *a2 = token2;
- int i;
-
- addrlen >>= 2;
-
- for (i = 0; i < addrlen; i++) {
-- __be32 xb = a1[i] ^ a2[i];
-+ __be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i];
- if (xb)
- return i * 32 + 31 - __fls(ntohl(xb));
- }
-@@ -830,17 +834,18 @@ static inline int ip6_default_np_autolab
- static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass,
- __be32 flowlabel)
- {
-- *(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel;
-+ net_hdr_word((__be32 *)hdr) =
-+ htonl(0x60000000 | (tclass << 20)) | flowlabel;
- }
-
- static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr)
- {
-- return *(__be32 *)hdr & IPV6_FLOWINFO_MASK;
-+ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWINFO_MASK;
- }
-
- static inline __be32 ip6_flowlabel(const struct ipv6hdr *hdr)
- {
-- return *(__be32 *)hdr & IPV6_FLOWLABEL_MASK;
-+ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWLABEL_MASK;
- }
-
- static inline u8 ip6_tclass(__be32 flowinfo)
---- a/include/net/secure_seq.h
-+++ b/include/net/secure_seq.h
-@@ -2,6 +2,7 @@
- #define _NET_SECURE_SEQ
-
- #include <linux/types.h>
-+#include <linux/in6.h>
-
- u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
- u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
---- a/include/uapi/linux/in.h
-+++ b/include/uapi/linux/in.h
-@@ -83,7 +83,7 @@ enum {
- /* Internet address. */
- struct in_addr {
- __be32 s_addr;
--};
-+} __attribute__((packed, aligned(2)));
- #endif
-
- #define IP_TOS 1
---- a/net/core/secure_seq.c
-+++ b/net/core/secure_seq.c
-@@ -46,11 +46,12 @@ __u32 secure_tcpv6_sequence_number(const
- u32 secret[MD5_MESSAGE_BYTES / 4];
- u32 hash[MD5_DIGEST_WORDS];
- u32 i;
-+ const struct in6_addr *daddr6 = (struct in6_addr *) daddr;
-
- net_secret_init();
- memcpy(hash, saddr, 16);
- for (i = 0; i < 4; i++)
-- secret[i] = net_secret[i] + (__force u32)daddr[i];
-+ secret[i] = net_secret[i] + (__force u32)daddr6->s6_addr32[i];
- secret[4] = net_secret[4] +
- (((__force u16)sport << 16) + (__force u16)dport);
- for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
-@@ -68,11 +69,12 @@ u32 secure_ipv6_port_ephemeral(const __b
- u32 secret[MD5_MESSAGE_BYTES / 4];
- u32 hash[MD5_DIGEST_WORDS];
- u32 i;
-+ const struct in6_addr *daddr6 = (struct in6_addr *) daddr;
-
- net_secret_init();
- memcpy(hash, saddr, 16);
- for (i = 0; i < 4; i++)
-- secret[i] = net_secret[i] + (__force u32) daddr[i];
-+ secret[i] = net_secret[i] + (__force u32) daddr6->s6_addr32[i];
- secret[4] = net_secret[4] + (__force u32)dport;
- for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
- secret[i] = net_secret[i];
-@@ -146,6 +148,7 @@ EXPORT_SYMBOL(secure_dccp_sequence_numbe
- u64 secure_dccpv6_sequence_number(__be32 *saddr, __be32 *daddr,
- __be16 sport, __be16 dport)
- {
-+ const struct in6_addr *daddr6 = (struct in6_addr *) daddr;
- u32 secret[MD5_MESSAGE_BYTES / 4];
- u32 hash[MD5_DIGEST_WORDS];
- u64 seq;
-@@ -154,7 +157,7 @@ u64 secure_dccpv6_sequence_number(__be32
- net_secret_init();
- memcpy(hash, saddr, 16);
- for (i = 0; i < 4; i++)
-- secret[i] = net_secret[i] + (__force u32)daddr[i];
-+ secret[i] = net_secret[i] + (__force u32)daddr6->s6_addr32[i];
- secret[4] = net_secret[4] +
- (((__force u16)sport << 16) + (__force u16)dport);
- for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
---- a/net/ipv6/ip6_fib.c
-+++ b/net/ipv6/ip6_fib.c
-@@ -136,7 +136,7 @@ static __be32 addr_bit_set(const void *t
- * See include/asm-generic/bitops/le.h.
- */
- return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) &
-- addr[fn_bit >> 5];
-+ net_hdr_word(&addr[fn_bit >> 5]);
- }
-
- static struct fib6_node *node_alloc(void)
---- a/net/netfilter/nf_conntrack_proto_tcp.c
-+++ b/net/netfilter/nf_conntrack_proto_tcp.c
-@@ -452,7 +452,7 @@ static void tcp_sack(const struct sk_buf
-
- /* Fast path for timestamp-only option */
- if (length == TCPOLEN_TSTAMP_ALIGNED
-- && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24)
-+ && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24)
- | (TCPOPT_NOP << 16)
- | (TCPOPT_TIMESTAMP << 8)
- | TCPOLEN_TIMESTAMP))
---- a/net/xfrm/xfrm_input.c
-+++ b/net/xfrm/xfrm_input.c
-@@ -154,8 +154,8 @@ int xfrm_parse_spi(struct sk_buff *skb,
- if (!pskb_may_pull(skb, hlen))
- return -EINVAL;
-
-- *spi = *(__be32 *)(skb_transport_header(skb) + offset);
-- *seq = *(__be32 *)(skb_transport_header(skb) + offset_seq);
-+ *spi = net_hdr_word(skb_transport_header(skb) + offset);
-+ *seq = net_hdr_word(skb_transport_header(skb) + offset_seq);
- return 0;
- }
-
---- a/net/ipv4/tcp_input.c
-+++ b/net/ipv4/tcp_input.c
-@@ -3910,14 +3910,16 @@ static bool tcp_parse_aligned_timestamp(
- {
- const __be32 *ptr = (const __be32 *)(th + 1);
-
-- if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16)
-- | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
-+ if (net_hdr_word(ptr) ==
-+ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
- tp->rx_opt.saw_tstamp = 1;
- ++ptr;
-- tp->rx_opt.rcv_tsval = ntohl(*ptr);
-+ tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr);
- ++ptr;
-- if (*ptr)
-- tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset;
-+ if (net_hdr_word(ptr))
-+ tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr) -
-+ tp->tsoffset;
- else
- tp->rx_opt.rcv_tsecr = 0;
- return true;
---- a/include/uapi/linux/if_pppox.h
-+++ b/include/uapi/linux/if_pppox.h
-@@ -50,6 +50,7 @@ struct pppoe_addr {
- */
- struct pptp_addr {
- __u16 call_id;
-+ __u16 pad;
- struct in_addr sin_addr;
- };
-
---- a/net/ipv6/netfilter/nf_log_ipv6.c
-+++ b/net/ipv6/netfilter/nf_log_ipv6.c
-@@ -66,9 +66,9 @@ static void dump_ipv6_packet(struct nf_l
- /* Max length: 44 "LEN=65535 TC=255 HOPLIMIT=255 FLOWLBL=FFFFF " */
- nf_log_buf_add(m, "LEN=%Zu TC=%u HOPLIMIT=%u FLOWLBL=%u ",
- ntohs(ih->payload_len) + sizeof(struct ipv6hdr),
-- (ntohl(*(__be32 *)ih) & 0x0ff00000) >> 20,
-+ (ntohl(net_hdr_word(ih)) & 0x0ff00000) >> 20,
- ih->hop_limit,
-- (ntohl(*(__be32 *)ih) & 0x000fffff));
-+ (ntohl(net_hdr_word(ih)) & 0x000fffff));
-
- fragment = 0;
- ptr = ip6hoff + sizeof(struct ipv6hdr);
---- a/include/net/neighbour.h
-+++ b/include/net/neighbour.h
-@@ -263,8 +263,10 @@ static inline bool neigh_key_eq128(const
- const u32 *n32 = (const u32 *)n->primary_key;
- const u32 *p32 = pkey;
-
-- return ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) |
-- (n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0;
-+ return ((n32[0] ^ net_hdr_word(&p32[0])) |
-+ (n32[1] ^ net_hdr_word(&p32[1])) |
-+ (n32[2] ^ net_hdr_word(&p32[2])) |
-+ (n32[3] ^ net_hdr_word(&p32[3]))) == 0;
- }
-
- static inline struct neighbour *___neigh_lookup_noref(
---- a/include/uapi/linux/netfilter_arp/arp_tables.h
-+++ b/include/uapi/linux/netfilter_arp/arp_tables.h
-@@ -69,7 +69,7 @@ struct arpt_arp {
- __u8 flags;
- /* Inverse flags */
- __u16 invflags;
--};
-+} __attribute__((aligned(4)));
-
- /* Values for "flag" field in struct arpt_ip (general arp structure).
- * No flags defined yet.
---- a/net/core/utils.c
-+++ b/net/core/utils.c
-@@ -321,8 +321,14 @@ void inet_proto_csum_replace16(__sum16 *
- bool pseudohdr)
- {
- __be32 diff[] = {
-- ~from[0], ~from[1], ~from[2], ~from[3],
-- to[0], to[1], to[2], to[3],
-+ ~net_hdr_word(&from[0]),
-+ ~net_hdr_word(&from[1]),
-+ ~net_hdr_word(&from[2]),
-+ ~net_hdr_word(&from[3]),
-+ net_hdr_word(&to[0]),
-+ net_hdr_word(&to[1]),
-+ net_hdr_word(&to[2]),
-+ net_hdr_word(&to[3]),
- };
- if (skb->ip_summed != CHECKSUM_PARTIAL) {
- *sum = csum_fold(csum_partial(diff, sizeof(diff),
---- a/drivers/net/vxlan.c
-+++ b/drivers/net/vxlan.c
-@@ -1789,15 +1789,15 @@ static int vxlan_build_skb(struct sk_buf
- goto out_free;
-
- vxh = (struct vxlanhdr *) __skb_push(skb, sizeof(*vxh));
-- vxh->vx_flags = VXLAN_HF_VNI;
-- vxh->vx_vni = vxlan_vni_field(vni);
-+ net_hdr_word(&vxh->vx_flags) = VXLAN_HF_VNI;
-+ net_hdr_word(&vxh->vx_vni) = vxlan_vni_field(vni);
-
- if (type & SKB_GSO_TUNNEL_REMCSUM) {
- unsigned int start;
-
- start = skb_checksum_start_offset(skb) - sizeof(struct vxlanhdr);
-- vxh->vx_vni |= vxlan_compute_rco(start, skb->csum_offset);
-- vxh->vx_flags |= VXLAN_HF_RCO;
-+ net_hdr_word(&vxh->vx_vni) |= vxlan_compute_rco(start, skb->csum_offset);
-+ net_hdr_word(&vxh->vx_flags) |= VXLAN_HF_RCO;
-
- if (!skb_is_gso(skb)) {
- skb->ip_summed = CHECKSUM_NONE;
---- a/include/linux/etherdevice.h
-+++ b/include/linux/etherdevice.h
-@@ -435,7 +435,7 @@ static inline bool is_etherdev_addr(cons
- * @b: Pointer to Ethernet header
- *
- * Compare two Ethernet headers, returns 0 if equal.
-- * This assumes that the network header (i.e., IP header) is 4-byte
-+ * This assumes that the network header (i.e., IP header) is 2-byte
- * aligned OR the platform can handle unaligned access. This is the
- * case for all packets coming into netif_receive_skb or similar
- * entry points.
-@@ -458,11 +458,12 @@ static inline unsigned long compare_ethe
- fold |= *(unsigned long *)(a + 6) ^ *(unsigned long *)(b + 6);
- return fold;
- #else
-- u32 *a32 = (u32 *)((u8 *)a + 2);
-- u32 *b32 = (u32 *)((u8 *)b + 2);
-+ const u16 *a16 = a;
-+ const u16 *b16 = b;
-
-- return (*(u16 *)a ^ *(u16 *)b) | (a32[0] ^ b32[0]) |
-- (a32[1] ^ b32[1]) | (a32[2] ^ b32[2]);
-+ return (a16[0] ^ b16[0]) | (a16[1] ^ b16[1]) | (a16[2] ^ b16[2]) |
-+ (a16[3] ^ b16[3]) | (a16[4] ^ b16[4]) | (a16[5] ^ b16[5]) |
-+ (a16[6] ^ b16[6]);
- #endif
- }
-
---- a/net/ipv4/tcp_offload.c
-+++ b/net/ipv4/tcp_offload.c
-@@ -218,7 +218,7 @@ struct sk_buff **tcp_gro_receive(struct
-
- th2 = tcp_hdr(p);
-
-- if (*(u32 *)&th->source ^ *(u32 *)&th2->source) {
-+ if (net_hdr_word(&th->source) ^ net_hdr_word(&th2->source)) {
- NAPI_GRO_CB(p)->same_flow = 0;
- continue;
- }
-@@ -236,8 +236,8 @@ found:
- ~(TCP_FLAG_CWR | TCP_FLAG_FIN | TCP_FLAG_PSH));
- flush |= (__force int)(th->ack_seq ^ th2->ack_seq);
- for (i = sizeof(*th); i < thlen; i += 4)
-- flush |= *(u32 *)((u8 *)th + i) ^
-- *(u32 *)((u8 *)th2 + i);
-+ flush |= net_hdr_word((u8 *)th + i) ^
-+ net_hdr_word((u8 *)th2 + i);
-
- /* When we receive our second frame we can made a decision on if we
- * continue this flow as an atomic flow with a fixed ID or if we use
---- a/net/ipv6/netfilter/ip6table_mangle.c
-+++ b/net/ipv6/netfilter/ip6table_mangle.c
-@@ -58,7 +58,7 @@ ip6t_mangle_out(struct sk_buff *skb, con
- hop_limit = ipv6_hdr(skb)->hop_limit;
-
- /* flowlabel and prio (includes version, which shouldn't change either */
-- flowlabel = *((u_int32_t *)ipv6_hdr(skb));
-+ flowlabel = net_hdr_word(ipv6_hdr(skb));
-
- ret = ip6t_do_table(skb, state, state->net->ipv6.ip6table_mangle);
-
-@@ -67,7 +67,7 @@ ip6t_mangle_out(struct sk_buff *skb, con
- !ipv6_addr_equal(&ipv6_hdr(skb)->daddr, &daddr) ||
- skb->mark != mark ||
- ipv6_hdr(skb)->hop_limit != hop_limit ||
-- flowlabel != *((u_int32_t *)ipv6_hdr(skb)))) {
-+ flowlabel != net_hdr_word(ipv6_hdr(skb)))) {
- err = ip6_route_me_harder(state->net, skb);
- if (err < 0)
- ret = NF_DROP_ERR(err);
+++ /dev/null
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -659,6 +659,7 @@
-
- #define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18)
- #define AR933X_BOOTSTRAP_EEPBUSY BIT(4)
-+#define AR933X_BOOTSTRAP_USB_MODE_HOST BIT(3)
- #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
-
- #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
-@@ -688,6 +689,8 @@
-
- #define QCA956X_BOOTSTRAP_REF_CLK_40 BIT(2)
-
-+#define AR933X_USB_CONFIG_HOST_ONLY BIT(8)
-+
- #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
- #define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1)
- #define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2)
---- a/arch/mips/ath79/dev-usb.c
-+++ b/arch/mips/ath79/dev-usb.c
-@@ -19,6 +19,9 @@
- #include <linux/platform_device.h>
- #include <linux/usb/ehci_pdriver.h>
- #include <linux/usb/ohci_pdriver.h>
-+#include <linux/usb/otg.h>
-+#include <linux/usb/chipidea.h>
-+#include <linux/usb/usb_phy_generic.h>
-
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
-@@ -170,6 +173,44 @@ static void __init ar913x_usb_setup(void
- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
- }
-
-+static void __init ar9xxx_ci_usb_setup(int bus_id, int irq)
-+{
-+ struct ci_hdrc_platform_data ci_pdata;
-+ bool host_mode = true;
-+
-+ if (soc_is_ar933x())
-+ host_mode = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP) &
-+ AR933X_BOOTSTRAP_USB_MODE_HOST;
-+ else
-+ host_mode = !(ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP) &
-+ AR934X_BOOTSTRAP_USB_MODE_DEVICE);
-+
-+ if (host_mode) {
-+ ath79_usb_register("ehci-platform", bus_id,
-+ AR934X_EHCI_BASE, AR934X_EHCI_SIZE,
-+ irq, &ath79_ehci_pdata_v2,
-+ sizeof(ath79_ehci_pdata_v2));
-+
-+ return;
-+ }
-+
-+ memset(&ci_pdata, 0, sizeof(ci_pdata));
-+ ci_pdata.name = "ci_hdrc_ar9xxx";
-+ ci_pdata.capoffset = DEF_CAPOFFSET;
-+ ci_pdata.dr_mode = USB_DR_MODE_PERIPHERAL;
-+ ci_pdata.flags = CI_HDRC_DUAL_ROLE_NOT_OTG | CI_HDRC_DP_ALWAYS_PULLUP;
-+ ci_pdata.vbus_extcon.edev = ERR_PTR(-ENODEV);
-+ ci_pdata.id_extcon.edev = ERR_PTR(-ENODEV);
-+ ci_pdata.itc_setting = 1;
-+
-+ platform_device_register_simple("usb_phy_generic",
-+ PLATFORM_DEVID_AUTO, NULL, 0);
-+
-+ ath79_usb_register("ci_hdrc", -1,
-+ AR934X_EHCI_BASE, AR934X_EHCI_SIZE,
-+ irq, &ci_pdata, sizeof(ci_pdata));
-+}
-+
- static void __init ar933x_usb_setup(void)
- {
- ath79_device_reset_set(AR933X_RESET_USBSUS_OVERRIDE);
-@@ -181,10 +222,7 @@ static void __init ar933x_usb_setup(void
- ath79_device_reset_clear(AR933X_RESET_USB_PHY);
- mdelay(10);
-
-- ath79_usb_register("ehci-platform", -1,
-- AR933X_EHCI_BASE, AR933X_EHCI_SIZE,
-- ATH79_CPU_IRQ(3),
-- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
-+ ar9xxx_ci_usb_setup(-1, ATH79_CPU_IRQ(3));
- }
-
- static void enable_tx_tx_idp_violation_fix(unsigned base)
-@@ -230,10 +268,7 @@ static void __init ar934x_usb_setup(void
- if (ath79_soc_rev >= 3)
- ath79_ehci_pdata_v2.reset_notifier = ar934x_usb_reset_notifier;
-
-- ath79_usb_register("ehci-platform", -1,
-- AR934X_EHCI_BASE, AR934X_EHCI_SIZE,
-- ATH79_CPU_IRQ(3),
-- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
-+ ar9xxx_ci_usb_setup(-1, ATH79_CPU_IRQ(3));
- }
-
- static void __init qca953x_usb_setup(void)
-@@ -254,10 +289,7 @@ static void __init qca953x_usb_setup(voi
- ath79_device_reset_clear(QCA953X_RESET_USB_HOST);
- udelay(1000);
-
-- ath79_usb_register("ehci-platform", -1,
-- QCA953X_EHCI_BASE, QCA953X_EHCI_SIZE,
-- ATH79_CPU_IRQ(3),
-- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
-+ ar9xxx_ci_usb_setup(-1, ATH79_CPU_IRQ(3));
- }
-
- static void qca955x_usb_reset_notifier(struct platform_device *pdev)
-@@ -285,10 +317,7 @@ static void __init qca955x_usb_setup(voi
- {
- ath79_ehci_pdata_v2.reset_notifier = qca955x_usb_reset_notifier;
-
-- ath79_usb_register("ehci-platform", 0,
-- QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE,
-- ATH79_IP3_IRQ(0),
-- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
-+ ar9xxx_ci_usb_setup(0, ATH79_IP3_IRQ(0));
-
- ath79_usb_register("ehci-platform", 1,
- QCA955X_EHCI1_BASE, QCA955X_EHCI_SIZE,
+++ /dev/null
-Add more registers for QCA955x and QCA956x.
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -175,6 +175,35 @@
- /*
- * Hidden Registers
- */
-+#define QCA956X_MAC_CFG_BASE 0xb9000000
-+#define QCA956X_MAC_CFG_SIZE 0x64
-+
-+#define QCA956X_MAC_CFG1_REG 0x00
-+#define QCA956X_MAC_CFG1_SOFT_RST BIT(31)
-+#define QCA956X_MAC_CFG1_RX_RST BIT(19)
-+#define QCA956X_MAC_CFG1_TX_RST BIT(18)
-+#define QCA956X_MAC_CFG1_LOOPBACK BIT(8)
-+#define QCA956X_MAC_CFG1_RX_EN BIT(2)
-+#define QCA956X_MAC_CFG1_TX_EN BIT(0)
-+
-+#define QCA956X_MAC_CFG2_REG 0x04
-+#define QCA956X_MAC_CFG2_IF_1000 BIT(9)
-+#define QCA956X_MAC_CFG2_IF_10_100 BIT(8)
-+#define QCA956X_MAC_CFG2_HUGE_FRAME_EN BIT(5)
-+#define QCA956X_MAC_CFG2_LEN_CHECK BIT(4)
-+#define QCA956X_MAC_CFG2_PAD_CRC_EN BIT(2)
-+#define QCA956X_MAC_CFG2_FDX BIT(0)
-+
-+#define QCA956X_MAC_MII_MGMT_CFG_REG 0x20
-+#define QCA956X_MGMT_CFG_CLK_DIV_20 0x07
-+
-+#define QCA956X_MAC_FIFO_CFG0_REG 0x48
-+#define QCA956X_MAC_FIFO_CFG1_REG 0x4c
-+#define QCA956X_MAC_FIFO_CFG2_REG 0x50
-+#define QCA956X_MAC_FIFO_CFG3_REG 0x54
-+#define QCA956X_MAC_FIFO_CFG4_REG 0x58
-+#define QCA956X_MAC_FIFO_CFG5_REG 0x5c
-+
- #define QCA956X_DAM_RESET_OFFSET 0xb90001bc
- #define QCA956X_DAM_RESET_SIZE 0x4
- #define QCA956X_INLINE_CHKSUM_ENG BIT(27)
-@@ -384,6 +413,7 @@
- #define QCA955X_PLL_CLK_CTRL_REG 0x08
- #define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28
- #define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48
-+#define QCA955X_PLL_ETH_SGMII_SERDES_REG 0x4c
-
- #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
- #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-@@ -416,12 +446,18 @@
- #define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
- #define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-
-+#define QCA955X_PLL_ETH_SGMII_SERDES_LOCK_DETECT BIT(2)
-+#define QCA955X_PLL_ETH_SGMII_SERDES_PLL_REFCLK BIT(1)
-+#define QCA955X_PLL_ETH_SGMII_SERDES_EN_PLL BIT(0)
-+
- #define QCA956X_PLL_CPU_CONFIG_REG 0x00
- #define QCA956X_PLL_CPU_CONFIG1_REG 0x04
- #define QCA956X_PLL_DDR_CONFIG_REG 0x08
- #define QCA956X_PLL_DDR_CONFIG1_REG 0x0c
- #define QCA956X_PLL_CLK_CTRL_REG 0x10
-+#define QCA956X_PLL_SWITCH_CLOCK_CONTROL_REG 0x28
- #define QCA956X_PLL_ETH_XMII_CONTROL_REG 0x30
-+#define QCA956X_PLL_ETH_SGMII_SERDES_REG 0x4c
-
- #define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
- #define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
-@@ -460,6 +496,31 @@
- #define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL BIT(21)
- #define QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_I2C_CLK_SELB BIT(5)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL0_1 BIT(6)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_UART1_CLK_SEL BIT(7)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_USB_REFCLK_FREQ_SEL_SHIFT 8
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_USB_REFCLK_FREQ_SEL_MASK 0xf
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_EN_PLL_TOP BIT(12)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL0_2 BIT(13)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL1_1 BIT(14)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL1_2 BIT(15)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_SWITCH_FUNC_TST_MODE BIT(16)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_EEE_ENABLE BIT(17)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_OEN_CLK125M_PLL BIT(18)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_SWITCHCLK_SEL BIT(19)
-+
-+#define QCA956X_PLL_ETH_XMII_TX_INVERT BIT(1)
-+#define QCA956X_PLL_ETH_XMII_GIGE BIT(25)
-+#define QCA956X_PLL_ETH_XMII_RX_DELAY_SHIFT 28
-+#define QCA956X_PLL_ETH_XMII_RX_DELAY_MASK 0x3
-+#define QCA956X_PLL_ETH_XMII_TX_DELAY_SHIFT 26
-+#define QCA956X_PLL_ETH_XMII_TX_DELAY_MASK 3
-+
-+#define QCA956X_PLL_ETH_SGMII_SERDES_LOCK_DETECT BIT(2)
-+#define QCA956X_PLL_ETH_SGMII_SERDES_PLL_REFCLK BIT(1)
-+#define QCA956X_PLL_ETH_SGMII_SERDES_EN_PLL BIT(0)
-+
- /*
- * USB_CONFIG block
- */
-@@ -657,6 +718,25 @@
- #define QCA955X_RESET_MBOX BIT(1)
- #define QCA955X_RESET_I2S BIT(0)
-
-+#define QCA956X_RESET_EXTERNAL BIT(28)
-+#define QCA956X_RESET_FULL_CHIP BIT(24)
-+#define QCA956X_RESET_GE1_MDIO BIT(23)
-+#define QCA956X_RESET_GE0_MDIO BIT(22)
-+#define QCA956X_RESET_CPU_NMI BIT(21)
-+#define QCA956X_RESET_CPU_COLD BIT(20)
-+#define QCA956X_RESET_DMA BIT(19)
-+#define QCA956X_RESET_DDR BIT(16)
-+#define QCA956X_RESET_GE1_MAC BIT(13)
-+#define QCA956X_RESET_SGMII_ANALOG BIT(12)
-+#define QCA956X_RESET_USB_PHY_ANALOG BIT(11)
-+#define QCA956X_RESET_GE0_MAC BIT(9)
-+#define QCA956X_RESET_SGMII BIT(8)
-+#define QCA956X_RESET_USB_HOST BIT(5)
-+#define QCA956X_RESET_USB_PHY BIT(4)
-+#define QCA956X_RESET_USBSUS_OVERRIDE BIT(3)
-+#define QCA956X_RESET_SWITCH_ANALOG BIT(2)
-+#define QCA956X_RESET_SWITCH BIT(0)
-+
- #define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18)
- #define AR933X_BOOTSTRAP_EEPBUSY BIT(4)
- #define AR933X_BOOTSTRAP_USB_MODE_HOST BIT(3)
-@@ -1189,6 +1269,7 @@
- */
-
- #define QCA955X_GMAC_REG_ETH_CFG 0x00
-+#define QCA955X_GMAC_REG_SGMII_SERDES 0x18
-
- #define QCA955X_ETH_CFG_RGMII_EN BIT(0)
- #define QCA955X_ETH_CFG_MII_GE0 BIT(1)
-@@ -1210,16 +1291,58 @@
- #define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3
- #define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20
-
-+#define QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS BIT(15)
-+#define QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23
-+#define QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf
- /*
- * QCA956X GMAC Interface
- */
-
--#define QCA956X_GMAC_REG_ETH_CFG 0x00
-+#define QCA956X_GMAC_REG_ETH_CFG 0x00
-+#define QCA956X_GMAC_REG_SGMII_RESET 0x14
-+#define QCA956X_GMAC_REG_SGMII_SERDES 0x18
-+#define QCA956X_GMAC_REG_MR_AN_CONTROL 0x1c
-+#define QCA956X_GMAC_REG_SGMII_CONFIG 0x34
-+#define QCA956X_GMAC_REG_SGMII_DEBUG 0x58
-
-+#define QCA956X_ETH_CFG_RGMII_EN BIT(0)
-+#define QCA956X_ETH_CFG_GE0_SGMII BIT(6)
- #define QCA956X_ETH_CFG_SW_ONLY_MODE BIT(7)
--#define QCA956X_ETH_CFG_SW_PHY_SWAP BIT(8)
-+#define QCA956X_ETH_CFG_SW_PHY_SWAP BIT(8)
- #define QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(9)
- #define QCA956X_ETH_CFG_SW_APB_ACCESS BIT(10)
- #define QCA956X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13)
-+#define QCA956X_ETH_CFG_RXD_DELAY_MASK 0x3
-+#define QCA956X_ETH_CFG_RXD_DELAY_SHIFT 14
-+#define QCA956X_ETH_CFG_RDV_DELAY_MASK 0x3
-+#define QCA956X_ETH_CFG_RDV_DELAY_SHIFT 16
-+
-+#define QCA956X_SGMII_RESET_RX_CLK_N_RESET 0x0
-+#define QCA956X_SGMII_RESET_RX_CLK_N BIT(0)
-+#define QCA956X_SGMII_RESET_TX_CLK_N BIT(1)
-+#define QCA956X_SGMII_RESET_RX_125M_N BIT(2)
-+#define QCA956X_SGMII_RESET_TX_125M_N BIT(3)
-+#define QCA956X_SGMII_RESET_HW_RX_125M_N BIT(4)
-+
-+#define QCA956X_SGMII_SERDES_CDR_BW_MASK 0x3
-+#define QCA956X_SGMII_SERDES_CDR_BW_SHIFT 1
-+#define QCA956X_SGMII_SERDES_TX_DR_CTRL_MASK 0x7
-+#define QCA956X_SGMII_SERDES_TX_DR_CTRL_SHIFT 4
-+#define QCA956X_SGMII_SERDES_PLL_BW BIT(8)
-+#define QCA956X_SGMII_SERDES_VCO_FAST BIT(9)
-+#define QCA956X_SGMII_SERDES_VCO_SLOW BIT(10)
-+#define QCA956X_SGMII_SERDES_LOCK_DETECT_STATUS BIT(15)
-+#define QCA956X_SGMII_SERDES_EN_SIGNAL_DETECT BIT(16)
-+#define QCA956X_SGMII_SERDES_FIBER_SDO BIT(17)
-+#define QCA956X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23
-+#define QCA956X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf
-+#define QCA956X_SGMII_SERDES_VCO_REG_SHIFT 27
-+#define QCA956X_SGMII_SERDES_VCO_REG_MASK 0xf
-+
-+#define QCA956X_MR_AN_CONTROL_AN_ENABLE BIT(12)
-+#define QCA956X_MR_AN_CONTROL_PHY_RESET BIT(15)
-+
-+#define QCA956X_SGMII_CONFIG_MODE_CTRL_SHIFT 0
-+#define QCA956X_SGMII_CONFIG_MODE_CTRL_MASK 0x7
-
- #endif /* __ASM_MACH_AR71XX_REGS_H */
+++ /dev/null
---- a/drivers/usb/chipidea/ci.h
-+++ b/drivers/usb/chipidea/ci.h
-@@ -199,6 +199,7 @@ struct hw_bank {
- * @in_lpm: if the core in low power mode
- * @wakeup_int: if wakeup interrupt occur
- * @rev: The revision number for controller
-+ * @dp_always_pullup: keep dp always pullup at device mode
- */
- struct ci_hdrc {
- struct device *dev;
-@@ -248,6 +249,7 @@ struct ci_hdrc {
- bool in_lpm;
- bool wakeup_int;
- enum ci_revision rev;
-+ bool dp_always_pullup;
- };
-
- static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
---- a/drivers/usb/chipidea/core.c
-+++ b/drivers/usb/chipidea/core.c
-@@ -839,7 +839,7 @@ static inline void ci_role_destroy(struc
- {
- ci_hdrc_gadget_destroy(ci);
- ci_hdrc_host_destroy(ci);
-- if (ci->is_otg && ci->roles[CI_ROLE_GADGET])
-+ if (!ci->dp_always_pullup && ci->roles[CI_ROLE_GADGET])
- ci_hdrc_otg_destroy(ci);
- }
-
-@@ -890,6 +890,9 @@ static int ci_hdrc_probe(struct platform
- ci->supports_runtime_pm = !!(ci->platdata->flags &
- CI_HDRC_SUPPORTS_RUNTIME_PM);
-
-+ ci->dp_always_pullup = !!(ci->platdata->flags &
-+ CI_HDRC_DP_ALWAYS_PULLUP);
-+
- ret = hw_device_init(ci, base);
- if (ret < 0) {
- dev_err(dev, "can't initialize hardware\n");
-@@ -963,7 +966,7 @@ static int ci_hdrc_probe(struct platform
- goto deinit_gadget;
- }
-
-- if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) {
-+ if (!ci->dp_always_pullup && ci->roles[CI_ROLE_GADGET]) {
- ret = ci_hdrc_otg_init(ci);
- if (ret) {
- dev_err(dev, "init otg fails, ret = %d\n", ret);
---- a/drivers/usb/chipidea/otg.c
-+++ b/drivers/usb/chipidea/otg.c
-@@ -131,8 +131,10 @@ enum ci_role ci_otg_role(struct ci_hdrc
-
- void ci_handle_vbus_change(struct ci_hdrc *ci)
- {
-- if (!ci->is_otg)
-+ if (ci->dp_always_pullup) {
-+ usb_gadget_vbus_connect(&ci->gadget);
- return;
-+ }
-
- if (hw_read_otgsc(ci, OTGSC_BSV) && !ci->vbus_active)
- usb_gadget_vbus_connect(&ci->gadget);
---- a/include/linux/usb/chipidea.h
-+++ b/include/linux/usb/chipidea.h
-@@ -57,6 +57,7 @@ struct ci_hdrc_platform_data {
- #define CI_HDRC_OVERRIDE_AHB_BURST BIT(9)
- #define CI_HDRC_OVERRIDE_TX_BURST BIT(10)
- #define CI_HDRC_OVERRIDE_RX_BURST BIT(11)
-+#define CI_HDRC_DP_ALWAYS_PULLUP BIT(12)
- enum usb_dr_mode dr_mode;
- #define CI_HDRC_CONTROLLER_RESET_EVENT 0
- #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
+++ /dev/null
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -134,7 +134,7 @@
- #define QCA955X_PCI_CTRL_SIZE 0x100
-
- #define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
--#define QCA955X_GMAC_SIZE 0x40
-+#define QCA955X_GMAC_SIZE 0x64
- #define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
- #define QCA955X_WMAC_SIZE 0x20000
- #define QCA955X_EHCI0_BASE 0x1b000000
-@@ -1269,7 +1269,11 @@
- */
-
- #define QCA955X_GMAC_REG_ETH_CFG 0x00
-+#define QCA955X_GMAC_REG_SGMII_RESET 0x14
- #define QCA955X_GMAC_REG_SGMII_SERDES 0x18
-+#define QCA955X_GMAC_REG_MR_AN_CONTROL 0x1c
-+#define QCA955X_GMAC_REG_MR_AN_STATUS 0x20
-+#define QCA955X_GMAC_REG_SGMII_DEBUG 0x58
-
- #define QCA955X_ETH_CFG_RGMII_EN BIT(0)
- #define QCA955X_ETH_CFG_MII_GE0 BIT(1)
-@@ -1291,6 +1295,18 @@
- #define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3
- #define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20
-
-+#define QCA955X_SGMII_RESET_RX_CLK_N_RESET 0x0
-+#define QCA955X_SGMII_RESET_RX_CLK_N BIT(0)
-+#define QCA955X_SGMII_RESET_TX_CLK_N BIT(1)
-+#define QCA955X_SGMII_RESET_RX_125M_N BIT(2)
-+#define QCA955X_SGMII_RESET_TX_125M_N BIT(3)
-+#define QCA955X_SGMII_RESET_HW_RX_125M_N BIT(4)
-+
-+#define QCA955X_MR_AN_CONTROL_PHY_RESET BIT(15)
-+#define QCA955X_MR_AN_CONTROL_AN_ENABLE BIT(12)
-+
-+#define QCA955X_MR_AN_STATUS_AN_ABILITY BIT(3)
-+
- #define QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS BIT(15)
- #define QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23
- #define QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf
+++ /dev/null
---- a/drivers/net/phy/mdio-boardinfo.c
-+++ b/drivers/net/phy/mdio-boardinfo.c
-@@ -49,6 +49,7 @@ mdiobus_register_board_info(struct mdio_
-
- for (i = 0; i < n; i++, be++, info++) {
- memcpy(&be->board_info, info, sizeof(*info));
-+ be->board_info.phy_addr = be->board_info.mdio_addr;
- mutex_lock(&__mdio_board_lock);
- list_add_tail(&be->list, &__mdio_board_list);
- mutex_unlock(&__mdio_board_lock);
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -872,6 +872,7 @@ extern struct bus_type mdio_bus_type;
-
- struct mdio_board_info {
- const char *bus_id;
-+ int mdio_addr;
- int phy_addr;
-
- const void *platform_data;
projects / openwrt / staging / hauke.git / commitdiff