select DEFAULT_UIMAGE
--- /dev/null
+++ b/arch/powerpc/boot/dts/rb333.dts
-@@ -0,0 +1,432 @@
+@@ -0,0 +1,426 @@
+
+/*
+ * RouterBOARD 333 series Device Tree Source
+ #size-cells = <1>;
+ #address-cells = <1>;
+
-+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ pci0 = &pci0;
+ };
+
-+
+ chosen {
+ bootargs = "console=ttyS0,115200 board=mpc8323 rootfstype=squashfs,yaffs2,jffs2 root=/dev/mtdblock1 boot=1";
+ // linux,platform = <0x8062>;
+ // interrupt-controller = <&ipic>;
+ };
+
-+ cpus {
-+ #cpus = <1>;
-+ #size-cells = <0>;
-+ #address-cells = <1>;
-+
-+ PowerPC,8323E@0 {
-+ device_type = "cpu";
-+ reg = <0x0>;
-+ i-cache-size = <0x4000>;
-+ d-cache-size = <0x4000>;
-+ i-cache-line-size = <0x20>;
-+ d-cache-line-size = <0x20>;
-+ // clock-frequency = <0x13de3650>;
-+ // timebase-frequency = <0x1fc9f08>;
++ cpus {
++ #cpus = <1>;
++ #size-cells = <0>;
++ #address-cells = <1>;
++
++ PowerPC,8323E@0 {
++ device_type = "cpu";
++ reg = <0x0>;
++ i-cache-size = <0x4000>;
++ d-cache-size = <0x4000>;
++ i-cache-line-size = <0x20>;
++ d-cache-line-size = <0x20>;
++ // clock-frequency = <0x13de3650>;
++ // timebase-frequency = <0x1fc9f08>;
+ timebase-frequency = <0x0000000>; // filled by the bootwrapper from the firmware blob
+ clock-frequency = <0x00000000>; // filled by the bootwrapper from the firmware blob
+ 32-bit;
-+ };
-+ };
++ };
++ };
+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x0 0x4000000>;
-+ // reg = <0x0 0x0000000>; // filled by the bootwrapper from the firmware blob
-+ };
++ memory {
++ device_type = "memory";
++ reg = <0x0 0x4000000>;
++ // reg = <0x0 0x0000000>; // filled by the bootwrapper from the firmware blob
++ };
+
+ flash {
+ reg = <0xfe000000 0x20000>;
+ fan_on = <&gpio0 0x10>;
+ };
+
++ soc8323@e0000000 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ device_type = "soc";
++ compatible = "simple-bus";
++ ranges = <0x0 0xe0000000 0x00100000>;
++ reg = <0xe0000000 0x00000200>;
++ bus-frequency = <1>;
++
++ wdt@200 {
++ device_type = "watchdog";
++ compatible = "mpc83xx_wdt";
++ reg = <0x200 0x100>;
++ };
++
++ ipic:pic@700 {
++ interrupt-controller;
++ #address-cells = <0>;
++ #interrupt-cells = <2>;
++ reg = <0x700 0x100>;
++ device_type = "ipic";
++ };
++
++ par_io@1400 {
++ num-ports = <4>;
++ device_type = "par_io";
++ reg = <0x1400 0x100>;
++
++ ucc2pio: ucc_pin@02 {
++ pio-map = <
++ /* port pin dir open_drain assignment has_irq */
++ 3 4 3 0 2 0
++ 3 5 1 0 2 0
++ 0 18 1 0 1 0
++ 0 19 1 0 1 0
++ 0 20 1 0 1 0
++ 0 21 1 0 1 0
++ 0 30 1 0 1 0
++ 3 6 2 0 1 0
++ 0 29 2 0 1 0
++ 0 31 2 0 1 0
++ 0 22 2 0 1 0
++ 0 23 2 0 1 0
++ 0 24 2 0 1 0
++ 0 25 2 0 1 0
++ 0 28 2 0 1 0
++ 0 26 2 0 1 0
++ 3 31 2 0 1 0>;
++ };
++
++ ucc3pio: ucc_pin@03 {
++ pio-map = <
++ /* port pin dir open_drain assignment has_irq */
++ 1 0 1 0 1 0
++ 1 1 1 0 1 0
++ 1 2 1 0 1 0
++ 1 3 1 0 1 0
++ 1 12 1 0 1 0
++ 3 24 2 0 1 0
++ 1 11 2 0 1 0
++ 1 13 2 0 1 0
++ 1 4 2 0 1 0
++ 1 5 2 0 1 0
++ 1 6 2 0 1 0
++ 1 7 2 0 1 0
++ 1 10 2 0 1 0
++ 1 8 2 0 1 0
++ 3 29 2 0 1 0>;
++ };
++
++ ucc4pio: ucc_pin@04 {
++ pio-map = <
++ /* port pin dir open_drain assignment has_irq */
++ 1 18 1 0 1 0
++ 1 19 1 0 1 0
++ 1 20 1 0 1 0
++ 1 21 1 0 1 0
++ 1 30 1 0 1 0
++ 3 20 2 0 1 0
++ 1 30 2 0 1 0
++ 1 31 2 0 1 0
++ 1 22 2 0 1 0
++ 1 23 2 0 1 0
++ 1 24 2 0 1 0
++ 1 25 2 0 1 0
++ 1 28 2 0 1 0
++ 1 26 2 0 1 0
++ 3 21 2 0 1 0>;
++ };
++ };
++
++ serial0: serial@4500 {
++ cell-index = <0>;
++ device_type = "serial";
++ compatible = "fsl,ns16550", "ns16550";
++ reg = <0x4500 0x100>;
++ clock-frequency = <0x7f27c20>;
++ interrupts = <9 0x8>;
++ interrupt-parent = <&ipic>;
++ };
++
++ dma@82a8 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
++ reg = <0x82a8 4>;
++ ranges = <0 0x8100 0x1a8>;
++ interrupt-parent = <&ipic>;
++ interrupts = <71 8>;
++ cell-index = <0>;
++ dma-channel@0 {
++ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
++ reg = <0 0x80>;
++ cell-index = <0>;
++ interrupt-parent = <&ipic>;
++ interrupts = <71 8>;
++ };
++ dma-channel@80 {
++ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
++ reg = <0x80 0x80>;
++ cell-index = <1>;
++ interrupt-parent = <&ipic>;
++ interrupts = <71 8>;
++ };
++ dma-channel@100 {
++ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
++ reg = <0x100 0x80>;
++ cell-index = <2>;
++ interrupt-parent = <&ipic>;
++ interrupts = <71 8>;
++ };
++ dma-channel@180 {
++ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
++ reg = <0x180 0x28>;
++ cell-index = <3>;
++ interrupt-parent = <&ipic>;
++ interrupts = <71 8>;
++ };
++ };
++
++ beeper {
++ gpio = <&gpio3 0x12>;
++ reg = <0x500 0x100>;
++ interrupt-parent = <&ipic>;
++ interrupts = <0x48 0x8>;
++ };
++
++ gpio3: gpio@3 {
++ reg = <0x144c 0x4>;
++ device-id = <0x3>;
++ compatible = "qe_gpio";
++ device_type = "gpio";
++ };
++
++ gpio2: gpio@2 {
++ reg = <0x1434 0x4>;
++ device-id = <0x2>;
++ compatible = "qe_gpio";
++ device_type = "gpio";
++ };
++
++ gpio0: gpio@0 {
++ reg = <0x1404 0x4>;
++ device-id = <0x0>;
++ compatible = "qe_gpio";
++ device_type = "gpio";
++ };
++ };
++
+ pci0: pci@e0008500 {
-+ device_type = "pci";
-+ // compatible = "83xx";
++ device_type = "pci";
++ // compatible = "83xx";
+ compatible = "fsl,mpc8349-pci";
-+ reg = <0xe0008500 0x100 0xe0008300 0x8>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
++ reg = <0xe0008500 0x100 0xe0008300 0x8>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
+ // clock-frequency = <0>;
-+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 0xd0000000 0x0 0x4000000>;
-+ bus-range = <0x0 0x0>;
-+ interrupt-map = <
++ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 0xd0000000 0x0 0x4000000>;
++ bus-range = <0x0 0x0>;
++ interrupt-map = <
+ /* IDSEL 0x10 AD16 miniPCI slot 0 */
-+ 0x8000 0x0 0x0 0x1 &ipic 0x11 0x8
-+ 0x8000 0x0 0x0 0x2 &ipic 0x12 0x8
++ 0x8000 0x0 0x0 0x1 &ipic 0x11 0x8
++ 0x8000 0x0 0x0 0x2 &ipic 0x12 0x8
+
+ /* IDSEL 0x11 AD17 miniPCI slot 1 */
-+ 0x8800 0x0 0x0 0x1 &ipic 0x12 0x8
-+ 0x8800 0x0 0x0 0x2 &ipic 0x13 0x8
++ 0x8800 0x0 0x0 0x1 &ipic 0x12 0x8
++ 0x8800 0x0 0x0 0x2 &ipic 0x13 0x8
+
+ /* IDSEL 0x12 AD18 miniPCI slot 2 */
-+ 0x9000 0x0 0x0 0x1 &ipic 0x13 0x8
-+ 0x9000 0x0 0x0 0x2 &ipic 0x11 0x8>;
++ 0x9000 0x0 0x0 0x1 &ipic 0x13 0x8
++ 0x9000 0x0 0x0 0x2 &ipic 0x11 0x8>;
+
-+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
++ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-parent = <&ipic>;
+ // interrupts = <66 0x8>;
-+ };
-+
++ };
+
+ qe@e0100000 {
+ reg = <0xe0100000 0x480>;
+ compatible = "ucc_geth";
+ device_type = "network";
+ phy-handle = <&phy2>;
-+ pio-handle = <&pio3>;
++ pio-handle = <&ucc3pio>;
+ };
+
+ enet1: ucc@3200 {
+ compatible = "ucc_geth";
+ device_type = "network";
+ phy-handle = <&phy3>;
-+ pio-handle = <&pio4>;
++ pio-handle = <&ucc4pio>;
+ };
+
+ enet2: ucc@3000 {
+ compatible = "ucc_geth";
+ device_type = "network";
+ phy-handle = <&phy1>;
-+ pio-handle = <&pio2>;
++ pio-handle = <&ucc2pio>;
+ };
+
+ spi@500 {
+ };
+ };
+ };
-+
-+
-+ soc8323@e0000000 {
-+ bus-frequency = <0x1>;
-+ reg = <0xe0000000 0x200>;
-+ ranges = <0x0 0xe0000000 0x100000>;
-+ device_type = "soc";
-+ compatible = "simple-bus";
-+ #interrupt-cells = <0x2>;
-+ #size-cells = <1>;
-+ #address-cells = <1>;
-+
-+ beeper {
-+ gpio = <&gpio3 0x12>;
-+ reg = <0x500 0x100>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x48 0x8>;
-+ };
-+
-+ gpio3: gpio@3 {
-+ reg = <0x144c 0x4>;
-+ device-id = <0x3>;
-+ compatible = "qe_gpio";
-+ device_type = "gpio";
-+ };
-+
-+ gpio2: gpio@2 {
-+ reg = <0x1434 0x4>;
-+ device-id = <0x2>;
-+ compatible = "qe_gpio";
-+ device_type = "gpio";
-+ };
-+
-+ gpio0: gpio@0 {
-+ reg = <0x1404 0x4>;
-+ device-id = <0x0>;
-+ compatible = "qe_gpio";
-+ device_type = "gpio";
-+ };
-+
-+ par_io@1400 {
-+ num-ports = <4>;
-+ device_type = "par_io";
-+ reg = <0x1400 0x100>;
-+
-+ pio4: ucc_pin@04 {
-+ pio-map = <
-+ /* port pin dir open_drain assignment has_irq */
-+ 1 18 1 0 1 0
-+ 1 19 1 0 1 0
-+ 1 20 1 0 1 0
-+ 1 21 1 0 1 0
-+ 1 30 1 0 1 0
-+ 3 20 2 0 1 0
-+ 1 30 2 0 1 0
-+ 1 31 2 0 1 0
-+ 1 22 2 0 1 0
-+ 1 23 2 0 1 0
-+ 1 24 2 0 1 0
-+ 1 25 2 0 1 0
-+ 1 28 2 0 1 0
-+ 1 26 2 0 1 0
-+ 3 21 2 0 1 0>;
-+ };
-+
-+ pio3: ucc_pin@03 {
-+ pio-map = <
-+ /* port pin dir open_drain assignment has_irq */
-+ 1 0 1 0 1 0
-+ 1 1 1 0 1 0
-+ 1 2 1 0 1 0
-+ 1 3 1 0 1 0
-+ 1 12 1 0 1 0
-+ 3 24 2 0 1 0
-+ 1 11 2 0 1 0
-+ 1 13 2 0 1 0
-+ 1 4 2 0 1 0
-+ 1 5 2 0 1 0
-+ 1 6 2 0 1 0
-+ 1 7 2 0 1 0
-+ 1 10 2 0 1 0
-+ 1 8 2 0 1 0
-+ 3 29 2 0 1 0>;
-+ };
-+
-+ pio2: ucc_pin@02 {
-+ pio-map = <
-+ /* port pin dir open_drain assignment has_irq */
-+ 3 4 3 0 2 0
-+ 3 5 1 0 2 0
-+ 0 18 1 0 1 0
-+ 0 19 1 0 1 0
-+ 0 20 1 0 1 0
-+ 0 21 1 0 1 0
-+ 0 30 1 0 1 0
-+ 3 6 2 0 1 0
-+ 0 29 2 0 1 0
-+ 0 31 2 0 1 0
-+ 0 22 2 0 1 0
-+ 0 23 2 0 1 0
-+ 0 24 2 0 1 0
-+ 0 25 2 0 1 0
-+ 0 28 2 0 1 0
-+ 0 26 2 0 1 0
-+ 3 31 2 0 1 0>;
-+ };
-+ };
-+
-+ ipic: pic@700 {
-+ device_type = "ipic";
-+ built-in;
-+ reg = <0x700 0x100>;
-+ #interrupt-cells = <0x2>;
-+ #address-cells = <0x0>;
-+ interrupt-controller;
-+ };
-+
-+
-+ serial@4500 {
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x9 0x8>;
-+ clock-frequency = <0x7f27c20>;
-+ reg = <0x4500 0x100>;
-+ compatible = "ns16550";
-+ device_type = "serial";
-+ };
-+
-+ dma@82a8 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
-+ reg = <0x82a8 4>;
-+ ranges = <0 0x8100 0x1a8>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ cell-index = <0>;
-+ dma-channel@0 {
-+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0 0x80>;
-+ cell-index = <0>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@80 {
-+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x80 0x80>;
-+ cell-index = <1>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@100 {
-+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x100 0x80>;
-+ cell-index = <2>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@180 {
-+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x180 0x28>;
-+ cell-index = <3>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ };
-+
-+ wdt@200 {
-+ reg = <0x200 0x100>;
-+ compatible = "mpc83xx_wdt";
-+ device_type = "watchdog";
-+ };
-+ };
+};
--- /dev/null
+++ b/arch/powerpc/boot/rb333.c
projects / openwrt / staging / neocturne.git / commitdiff