lantiq: add support for TP-Link VR200v

This adds basic support for TP-Link VR200v.
Currently the following parts are not working: FXO, Voice, DECT, WIFI (both)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 48328

diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network
index 89faeaaa3470e3ea246d3fff90febb74c8a3b338..8ed525915d341e75c8b3c254c555ffc8420037e4 100755 (executable)
--- a/target/linux/lantiq/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/base-files/etc/board.d/02_network
@@ -96,6 +96,13 @@ TDW8970|TDW8980)
                "0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
        ;;
 
+VR200v)
+       lan_mac=$(mtd_get_mac_binary romfile 61696)
+       wan_mac=$(macaddr_add "$lan_mac" 1)
+       ucidef_add_switch "switch0" \
+               "0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
+       ;;
+
 ARV7519RW22)
        lan_mac=$(mtd_get_mac_binary boardconfig 22)
        wan_mac=$(macaddr_add "$lan_mac" 1)

diff --git a/target/linux/lantiq/dts/VR200v.dts b/target/linux/lantiq/dts/VR200v.dts
new file mode 100644 (file)
index 0000000..9cf306c
--- /dev/null
+++ b/target/linux/lantiq/dts/VR200v.dts
@@ -0,0 +1,280 @@
+/dts-v1/;
+
+/include/ "vr9.dtsi"
+
+/ {
+       model = "VR200v - TP-LINK Archer VR200v";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+
+               leds {
+                       boot = &power;
+                       failsafe = &power;
+
+                       dsl = &dsl;
+                       internet = &internet;
+                       usb = &usb;
+                       usb2 = &usb;
+               };
+       };
+
+       memory@0 {
+               reg = <0x0 0x7f00000>;
+       };
+
+       fpi@10000000 {
+               gpio: pinmux@E100B10 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&state_default>;
+
+                       state_default: pinmux {
+                               mdio {
+                                       lantiq,groups = "mdio";
+                                       lantiq,function = "mdio";
+                               };
+                               gphy-leds {
+                                       lantiq,groups = "gphy0 led1", "gphy1 led1";
+                                       lantiq,function = "gphy";
+                                       lantiq,pull = <2>;
+                                       lantiq,open-drain = <0>;
+                                       lantiq,output = <1>;
+                               };
+                               phy-rst {
+                                       lantiq,pins = "io42";
+                                       lantiq,pull = <0>;
+                                       lantiq,open-drain = <0>;
+                                       lantiq,output = <1>;
+                               };
+                               pcie-rst {
+                                       lantiq,pins = "io38";
+                                       lantiq,pull = <0>;
+                                       lantiq,output = <1>;
+                               };
+                       };
+                       pins_spi_default: pins_spi_default {
+                               spi_in {
+                                       lantiq,groups = "spi_di";
+                                       lantiq,function = "spi";
+                               };
+                               spi_out {
+                                       lantiq,groups = "spi_do", "spi_clk",
+                                               "spi_cs4";
+                                       lantiq,function = "spi";
+                                       lantiq,output = <1>;
+                               };
+                       };
+               };
+
+               eth@E108000 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "lantiq,xrx200-net";
+                       reg = < 0xE108000 0x3000 /* switch */
+                               0xE10B100 0x70 /* mdio */
+                               0xE10B1D8 0x30 /* mii */
+                               0xE10B308 0x30 /* pmac */
+                       >;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <73 72>;
+
+                       lan: interface@0 {
+                               compatible = "lantiq,xrx200-pdi";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               reg = <0>;
+                               mtd-mac-address = <&romfile 0xf100>;
+                               lantiq,switch;
+
+                               ethernet@0 {
+                                       compatible = "lantiq,xrx200-pdi-port";
+                                       reg = <0>;
+                                       phy-mode = "rgmii";
+                                       phy-handle = <&phy0>;
+                                       // gpios = <&gpio 42 1>;
+                               };
+                               ethernet@5 {
+                                       compatible = "lantiq,xrx200-pdi-port";
+                                       reg = <5>;
+                                       phy-mode = "rgmii";
+                                       phy-handle = <&phy5>;
+                               };
+                               ethernet@2 {
+                                       compatible = "lantiq,xrx200-pdi-port";
+                                       reg = <2>;
+                                       phy-mode = "gmii";
+                                       phy-handle = <&phy11>;
+                               };
+                               ethernet@3 {
+                                       compatible = "lantiq,xrx200-pdi-port";
+                                       reg = <4>;
+                                       phy-mode = "gmii";
+                                       phy-handle = <&phy13>;
+                               };
+                       };
+
+                       mdio@0 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               compatible = "lantiq,xrx200-mdio";
+                               phy0: ethernet-phy@0 {
+                                       reg = <0x0>;
+                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                               };
+                               phy5: ethernet-phy@5 {
+                                       reg = <0x5>;
+                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                               };
+                               phy11: ethernet-phy@11 {
+                                       reg = <0x11>;
+                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                               };
+                               phy13: ethernet-phy@13 {
+                                       reg = <0x13>;
+                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                               };
+                       };
+               };
+
+               ifxhcd@E101000 {
+                       status = "okay";
+                       gpios = <&gpio 33 0>;
+                       lantiq,portmask = <0x3>;
+               };
+
+               ifxhcd@E106000 {
+                       status = "okay";
+                       gpios = <&gpio 33 0>;
+               };
+       };
+
+       gphy-xrx200 {
+               compatible = "lantiq,phy-xrx200";
+               firmware = "lantiq/vr9_phy11g_a2x.bin";
+               phys = [ 00 01 ];
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 22 1>;
+                       linux,code = <0x198>;
+               };
+
+               wifi {
+                       label = "wifi";
+                       gpios = <&gpio 0 0>;
+                       linux,code = <0xf7>;
+                       linux,input-type = <5>; /* EV_SW */
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 2 1>;
+                       linux,code = <0x211>;
+               };
+
+               dect_paging {
+                       label = "dect_paging";
+                       gpios = <&gpio 39 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power: power {
+                       label = "vr200v:blue:power";
+                       gpios = <&gpio 46 1>;
+               };
+               dsl: dsl {
+                       label = "vr200v:blue:dsl";
+                       gpios = <&gpio 4 1>;
+               };
+               internet: internet {
+                       label = "vr200v:blue:internet";
+                       gpios = <&gpio 5 1>;
+               };
+               usb: usb {
+                       label = "vr200v:blue:usb";
+                       gpios = <&gpio 25 1>;
+               };
+               eth {
+                       label = "vr200v:blue:lan";
+                       gpios = <&gpio 40 1>;
+               };
+               wlan {
+                       label = "vr200v:blue:wlan";
+                       gpios = <&gpio 24 1>;
+               };
+               wlan5g {
+                       label = "vr200v:blue:wlan5g";
+                       gpios = <&gpio 20 1>;
+               };
+               phone {
+                       label = "vr200v:blue:phone";
+                       gpios = <&gpio 44 1>;
+               };
+       };
+};
+
+&spi {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pins_spi_default>;
+
+       status = "ok";
+
+       m25p80@4 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <4 0>;
+               spi-max-frequency = <33250000>;
+               m25p,fast-read;
+
+               partition@0 {
+                       reg = <0x0 0x20000>;
+                       label = "u-boot";
+                       read-only;
+               };
+
+               partition@20000 {
+                       reg = <0x20000 0xf90000>;
+                       label = "firmware";
+               };
+
+               partition@fb0000 {
+                       reg = <0xfb0000 0x10000>;
+                       label = "radioDECT";
+                       read-only;
+               };
+
+               partition@fc0000 {
+                       reg = <0xfc0000 0x10000>;
+                       label = "config";
+                       read-only;
+               };
+
+               romfile: partition@fd0000 {
+                       reg = <0xfd0000 0x10000>;
+                       label = "romfile";
+                       read-only;
+               };
+
+               partition@fe0000 {
+                       reg = <0xfe0000 0x10000>;
+                       label = "rom";
+                       read-only;
+               };
+
+               partition@ff0000 {
+                       reg = <0xff0000 0x10000>;
+                       label = "radio";
+                       read-only;
+               };
+       };
+};

diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile
index f986d386429e027cf16db1651b2a326f6ef3466f..882fba80f8f31502ace7018269bd889eb45e32ca 100644 (file)
--- a/target/linux/lantiq/image/Makefile
+++ b/target/linux/lantiq/image/Makefile
@@ -413,6 +413,9 @@ Image/Build/Profile/TDW8970=$(call Image/BuildTPLink/$(1),$(1),TDW8970,TD-W8970v
 Image/BuildKernel/Profile/TDW8980=$(call Image/BuildKernelTPLink/Template,TDW8980,TD-W8980v1,$(1))
 Image/Build/Profile/TDW8980=$(call Image/BuildTPLink/$(1),$(1),TDW8980,TD-W8980v1)
 
+Image/BuildKernel/Profile/VR200v=$(call Image/BuildKernelTPLink/Template,VR200v,ArcherVR200V,$(1))
+Image/Build/Profile/VR200v=$(call Image/BuildTPLink/$(1),$(1),VR200v,ArcherVR200V)
+
 Image/BuildKernel/Profile/VGV7510KW22NOR=$(call Image/BuildKernel/Template,VGV7510KW22NOR,$(1))
 Image/Build/Profile/VGV7510KW22NOR=$(call Image/Build/$(1),$(1),VGV7510KW22NOR)
 

diff --git a/target/linux/lantiq/xrx200/profiles/tplink.mk b/target/linux/lantiq/xrx200/profiles/tplink.mk
index 6ae939906089c5ffbc8a23633588d615902c53a4..091935d26765be4a893618445dd71abce5837b8c 100644 (file)
--- a/target/linux/lantiq/xrx200/profiles/tplink.mk
+++ b/target/linux/lantiq/xrx200/profiles/tplink.mk
@@ -11,3 +11,10 @@ define Profile/TDW8980
 endef
 
 $(eval $(call Profile,TDW8980))
+
+define Profile/VR200v
+  NAME:=TP-LINK Archer VR200v
+  PACKAGES:=kmod-usb-dwc2 kmod-ledtrig-usbdev
+endef
+
+$(eval $(call Profile,VR200v))

diff --git a/tools/firmware-utils/src/mktplinkfw2.c b/tools/firmware-utils/src/mktplinkfw2.c
index 92775290f816f95d461829ad9eb55439d54d82f6..9b9ebf526c144143a26f68b3c565b0a0556471c6 100644 (file)
--- a/tools/firmware-utils/src/mktplinkfw2.c
+++ b/tools/firmware-utils/src/mktplinkfw2.c
@@ -143,6 +143,12 @@ static struct flash_layout layouts[] = {
                .kernel_la      = 0x80002000,
                .kernel_ep      = 0x80002000,
                .rootfs_ofs     = 0x140000,
+       }, {
+               .id             = "16Mltq",
+               .fw_max_len     = 0xf90000,
+               .kernel_la      = 0x80002000,
+               .kernel_ep      = 0x800061b0,
+               .rootfs_ofs     = 0x140000,
        }, {
                .id             = "8Mmtk",
                .fw_max_len     = 0x7a0000,
@@ -172,6 +178,12 @@ static struct board_info boards[] = {
                .layout_id      = "8Mmtk",
                .hdr_ver        = 3,
                .endian_swap    = true,
+       }, {
+               .id             = "ArcherVR200V",
+               .hw_id          = 0x73b70801,
+               .hw_rev         = 0x2f,
+               .layout_id      = "16Mltq",
+               .hdr_ver        = 2,
        }, {
                /* terminating entry */
        }