examples: remove the remainders of dead board

Commit 309a292e deleted OXC board, but
missed to remove the standalone example specific to OXC board.

eepro100_eeprom.c has been an orphan file for a long term.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

diff --git a/examples/standalone/Makefile b/examples/standalone/Makefile
index 4afedea065dd9e8da7c4bccfeaf4af109d1f7bc8..93469217ef8ad8442bdbaefaf0f8099ea9993607 100644 (file)
--- a/examples/standalone/Makefile
+++ b/examples/standalone/Makefile
@@ -8,7 +8,6 @@
 include $(TOPDIR)/config.mk
 
 ELF-$(ARCH)  :=
-ELF-$(BOARD) :=
 ELF-$(CPU)   :=
 ELF-y        := hello_world
 
@@ -20,14 +19,13 @@ ELF-mpc5xxx                      += interrupt
 ELF-mpc8xx                       += test_burst timer
 ELF-mpc8260                      += mem_to_mem_idma2intr
 ELF-ppc                          += sched
-ELF-oxc                          += eepro100_eeprom
 
 #
 # Some versions of make do not handle trailing white spaces properly;
 # leading to build failures. The problem was found with GNU Make 3.80.
 # Using 'strip' as a workaround for the problem.
 #
-ELF := $(strip $(ELF-y) $(ELF-$(ARCH)) $(ELF-$(BOARD)) $(ELF-$(CPU)))
+ELF := $(strip $(ELF-y) $(ELF-$(ARCH)) $(ELF-$(CPU)))
 
 SREC := $(addsuffix .srec,$(ELF))
 BIN  := $(addsuffix .bin,$(ELF))

diff --git a/examples/standalone/eepro100_eeprom.c b/examples/standalone/eepro100_eeprom.c
deleted file mode 100644 (file)
index 3c7f380..0000000
--- a/examples/standalone/eepro100_eeprom.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Copyright 1998-2001 by Donald Becker.
- * This software may be used and distributed according to the terms of
- * the GNU General Public License (GPL), incorporated herein by reference.
- * Contact the author for use under other terms.
- *
- * This program must be compiled with "-O"!
- * See the bottom of this file for the suggested compile-command.
- *
- * The author may be reached as becker@scyld.com, or C/O
- *  Scyld Computing Corporation
- *  410 Severn Ave., Suite 210
- *  Annapolis MD 21403
- *
- * Common-sense licensing statement: Using any portion of this program in
- * your own program means that you must give credit to the original author
- * and release the resulting code under the GPL.
- */
-
-/* avoid unnecessary memcpy function */
-#define _PPC_STRING_H_
-
-#include <common.h>
-#include <exports.h>
-
-static int reset_eeprom(unsigned long ioaddr, unsigned char *hwaddr);
-
-int eepro100_eeprom(int argc, char * const argv[])
-{
-       int ret = 0;
-
-       unsigned char hwaddr1[6] = { 0x00, 0x00, 0x02, 0x03, 0x04, 0x05 };
-       unsigned char hwaddr2[6] = { 0x00, 0x00, 0x02, 0x03, 0x04, 0x06 };
-
-       app_startup(argv);
-
-#if defined(CONFIG_OXC)
-       ret |= reset_eeprom(0x80000000, hwaddr1);
-       ret |= reset_eeprom(0x81000000, hwaddr2);
-#endif
-
-       return ret;
-}
-
-/* Default EEPROM for i82559 */
-static unsigned short default_eeprom[64] = {
-       0x0100, 0x0302, 0x0504, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-       0xffff, 0xffff, 0x40c0, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
-       0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-       0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-       0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-       0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-       0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-       0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff
-};
-
-static unsigned short eeprom[256];
-
-static int eeprom_size = 64;
-static int eeprom_addr_size = 6;
-
-static int debug = 0;
-
-static inline unsigned short swap16(unsigned short x)
-{
-       return (((x & 0xff) << 8) | ((x & 0xff00) >> 8));
-}
-
-static inline void outw(short data, long addr)
-{
-       *(volatile short *)(addr) = swap16(data);
-}
-
-static inline short inw(long addr)
-{
-       return swap16(*(volatile short *)(addr));
-}
-
-void *memcpy(void *dst, const void *src, unsigned int len)
-{
-       char *ret = dst;
-       while (len-- > 0) {
-               *ret++ = *((char *)src);
-               src++;
-       }
-       return (void *)ret;
-}
-
-/* The EEPROM commands include the alway-set leading bit. */
-#define EE_WRITE_CMD   (5)
-#define EE_READ_CMD            (6)
-#define EE_ERASE_CMD   (7)
-
-/* Serial EEPROM section. */
-#define EE_SHIFT_CLK   0x01    /* EEPROM shift clock. */
-#define EE_CS                  0x02    /* EEPROM chip select. */
-#define EE_DATA_WRITE  0x04    /* EEPROM chip data in. */
-#define EE_DATA_READ   0x08    /* EEPROM chip data out. */
-#define EE_ENB                 (0x4800 | EE_CS)
-#define EE_WRITE_0             0x4802
-#define EE_WRITE_1             0x4806
-#define EE_OFFSET              14
-
-/* Delay between EEPROM clock transitions. */
-#define eeprom_delay(ee_addr)  inw(ee_addr)
-
-/* Wait for the EEPROM to finish the previous operation. */
-static int eeprom_busy_poll(long ee_ioaddr)
-{
-       int i;
-       outw(EE_ENB, ee_ioaddr);
-       for (i = 0; i < 10000; i++)                     /* Typical 2000 ticks */
-               if (inw(ee_ioaddr) & EE_DATA_READ)
-                       break;
-       return i;
-}
-
-/* This executes a generic EEPROM command, typically a write or write enable.
-   It returns the data output from the EEPROM, and thus may also be used for
-   reads. */
-static int do_eeprom_cmd(long ioaddr, int cmd, int cmd_len)
-{
-       unsigned retval = 0;
-       long ee_addr = ioaddr + EE_OFFSET;
-
-       if (debug > 1)
-               printf(" EEPROM op 0x%x: ", cmd);
-
-       outw(EE_ENB | EE_SHIFT_CLK, ee_addr);
-
-       /* Shift the command bits out. */
-       do {
-               short dataval = (cmd & (1 << cmd_len)) ? EE_WRITE_1 : EE_WRITE_0;
-               outw(dataval, ee_addr);
-               eeprom_delay(ee_addr);
-               if (debug > 2)
-                       printf("%X", inw(ee_addr) & 15);
-               outw(dataval | EE_SHIFT_CLK, ee_addr);
-               eeprom_delay(ee_addr);
-               retval = (retval << 1) | ((inw(ee_addr) & EE_DATA_READ) ? 1 : 0);
-       } while (--cmd_len >= 0);
-#if 0
-       outw(EE_ENB, ee_addr);
-#endif
-       /* Terminate the EEPROM access. */
-       outw(EE_ENB & ~EE_CS, ee_addr);
-       if (debug > 1)
-               printf(" EEPROM result is 0x%5.5x.\n", retval);
-       return retval;
-}
-
-static int read_eeprom(long ioaddr, int location, int addr_len)
-{
-       return do_eeprom_cmd(ioaddr, ((EE_READ_CMD << addr_len) | location)
-               << 16 , 3 + addr_len + 16) & 0xffff;
-}
-
-static void write_eeprom(long ioaddr, int index, int value, int addr_len)
-{
-       long ee_ioaddr = ioaddr + EE_OFFSET;
-       int i;
-
-       /* Poll for previous op finished. */
-       eeprom_busy_poll(ee_ioaddr);                    /* Typical 0 ticks */
-       /* Enable programming modes. */
-       do_eeprom_cmd(ioaddr, (0x4f << (addr_len-4)), 3 + addr_len);
-       /* Do the actual write. */
-       do_eeprom_cmd(ioaddr,
-                                 (((EE_WRITE_CMD<<addr_len) | index)<<16) | (value & 0xffff),
-                                 3 + addr_len + 16);
-       /* Poll for write finished. */
-       i = eeprom_busy_poll(ee_ioaddr);                        /* Typical 2000 ticks */
-       if (debug)
-               printf(" Write finished after %d ticks.\n", i);
-       /* Disable programming. This command is not instantaneous, so we check
-          for busy before the next op. */
-       do_eeprom_cmd(ioaddr, (0x40 << (addr_len-4)), 3 + addr_len);
-       eeprom_busy_poll(ee_ioaddr);
-}
-
-static int reset_eeprom(unsigned long ioaddr, unsigned char *hwaddr)
-{
-       unsigned short checksum = 0;
-       int size_test;
-       int i;
-
-       printf("Resetting i82559 EEPROM @ 0x%08lX ... ", ioaddr);
-
-       size_test = do_eeprom_cmd(ioaddr, (EE_READ_CMD << 8) << 16, 27);
-       eeprom_addr_size = (size_test & 0xffe0000) == 0xffe0000 ? 8 : 6;
-       eeprom_size = 1 << eeprom_addr_size;
-
-       memcpy(eeprom, default_eeprom, sizeof default_eeprom);
-
-       for (i = 0; i < 3; i++)
-               eeprom[i] = (hwaddr[i*2+1]<<8) + hwaddr[i*2];
-
-       /* Recalculate the checksum. */
-       for (i = 0; i < eeprom_size - 1; i++)
-               checksum += eeprom[i];
-       eeprom[i] = 0xBABA - checksum;
-
-       for (i = 0; i < eeprom_size; i++)
-               write_eeprom(ioaddr, i, eeprom[i], eeprom_addr_size);
-
-       for (i = 0; i < eeprom_size; i++)
-               if (read_eeprom(ioaddr, i, eeprom_addr_size) != eeprom[i]) {
-                       printf("failed\n");
-                       return 1;
-               }
-
-       printf("done\n");
-       return 0;
-}