Enable logging of debug information in case of ccw device timeouts.
-
-* cio_msg = yes | no
-
- Determines whether information on found devices and sensed device
- characteristics should be shown during startup or when new devices are
- found, i. e. messages of the types "Detected device 0.0.4711 on subchannel
- 0.0.0042" and "SenseID: Device 0.0.4711 reports: ...".
-
- Default is off.
-
-
* cio_ignore = {all} |
{<device> | <range of devices>} |
{!<device> | !<range of devices>}
static int __init
blacklist_setup (char *str)
{
- CIO_MSG_EVENT(6, "Reading blacklist parameters\n");
return blacklist_parse_parameters (str, add);
}
debug_info_t *cio_debug_trace_id;
debug_info_t *cio_debug_crw_id;
-int cio_show_msg;
-
-static int __init
-cio_setup (char *parm)
-{
- if (!strcmp (parm, "yes"))
- cio_show_msg = 1;
- else if (!strcmp (parm, "no"))
- cio_show_msg = 0;
- else
- printk(KERN_ERR "cio: cio_setup: "
- "invalid cio_msg parameter '%s'", parm);
- return 1;
-}
-
-__setup ("cio_msg=", cio_setup);
-
/*
* Function: cio_debug_init
* Initializes three debug logs for common I/O:
stsch (sch->schid, &sch->schib);
- CIO_MSG_EVENT(0, "cio_start: 'not oper' status for "
+ CIO_MSG_EVENT(2, "cio_start: 'not oper' status for "
"subchannel 0.%x.%04x!\n", sch->schid.ssid,
sch->schid.sch_no);
sprintf(dbf_text, "no%s", sch->dev.bus_id);
* ... just being curious we check for non I/O subchannels
*/
if (sch->st != 0) {
- CIO_DEBUG(KERN_INFO, 0,
- "Subchannel 0.%x.%04x reports "
- "non-I/O subchannel type %04X\n",
- sch->schid.ssid, sch->schid.sch_no, sch->st);
+ CIO_MSG_EVENT(4, "Subchannel 0.%x.%04x reports "
+ "non-I/O subchannel type %04X\n",
+ sch->schid.ssid, sch->schid.sch_no, sch->st);
/* We stop here for non-io subchannels. */
err = sch->st;
goto out;
* This device must not be known to Linux. So we simply
* say that there is no device and return ENODEV.
*/
- CIO_MSG_EVENT(4, "Blacklisted device detected "
+ CIO_MSG_EVENT(6, "Blacklisted device detected "
"at devno %04X, subchannel set %x\n",
sch->schib.pmcw.dev, sch->schid.ssid);
err = -ENODEV;
sch->lpm = sch->schib.pmcw.pam & sch->opm;
sch->isc = 3;
- CIO_DEBUG(KERN_INFO, 0,
- "Detected device %04x on subchannel 0.%x.%04X"
- " - PIM = %02X, PAM = %02X, POM = %02X\n",
- sch->schib.pmcw.dev, sch->schid.ssid,
- sch->schid.sch_no, sch->schib.pmcw.pim,
- sch->schib.pmcw.pam, sch->schib.pmcw.pom);
+ CIO_MSG_EVENT(6, "Detected device %04x on subchannel 0.%x.%04X "
+ "- PIM = %02X, PAM = %02X, POM = %02X\n",
+ sch->schib.pmcw.dev, sch->schid.ssid,
+ sch->schid.sch_no, sch->schib.pmcw.pim,
+ sch->schib.pmcw.pam, sch->schib.pmcw.pom);
/*
* We now have to initially ...
#define cio_get_console_priv() NULL
#endif
-extern int cio_show_msg;
-
#endif
}
}
-#define CIO_DEBUG(printk_level, event_level, msg...) do { \
- if (cio_show_msg) \
- printk(printk_level "cio: " msg); \
- CIO_MSG_EVENT(event_level, msg); \
- } while (0)
-
#endif
{
int ret;
- CIO_MSG_EVENT(2, "reprobe start\n");
+ CIO_MSG_EVENT(4, "reprobe start\n");
need_reprobe = 0;
/* Make sure initial subchannel scan is done. */
atomic_read(&ccw_device_init_count) == 0);
ret = for_each_subchannel_staged(NULL, reprobe_subchannel, NULL);
- CIO_MSG_EVENT(2, "reprobe done (rc=%d, need_reprobe=%d)\n", ret,
+ CIO_MSG_EVENT(4, "reprobe done (rc=%d, need_reprobe=%d)\n", ret,
need_reprobe);
}
rc = device_schedule_callback(&cdev->dev,
ccw_device_remove_orphan_cb);
if (rc)
- CIO_MSG_EVENT(2, "Couldn't unregister orphan "
+ CIO_MSG_EVENT(0, "Couldn't unregister orphan "
"0.%x.%04x\n",
cdev->private->dev_id.ssid,
cdev->private->dev_id.devno);
rc = device_schedule_callback(cdev->dev.parent,
ccw_device_remove_sch_cb);
if (rc)
- CIO_MSG_EVENT(2, "Couldn't unregister disconnected device "
+ CIO_MSG_EVENT(0, "Couldn't unregister disconnected device "
"0.%x.%04x\n",
cdev->private->dev_id.ssid,
cdev->private->dev_id.devno);
if (ret == 0)
wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev));
else {
- CIO_MSG_EVENT(2, "ccw_device_offline returned %d, "
+ CIO_MSG_EVENT(0, "ccw_device_offline returned %d, "
"device 0.%x.%04x\n",
ret, cdev->private->dev_id.ssid,
cdev->private->dev_id.devno);
if (ret == 0)
wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev));
else {
- CIO_MSG_EVENT(2, "ccw_device_online returned %d, "
+ CIO_MSG_EVENT(0, "ccw_device_online returned %d, "
"device 0.%x.%04x\n",
ret, cdev->private->dev_id.ssid,
cdev->private->dev_id.devno);
if (ret == 0)
wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev));
else
- CIO_MSG_EVENT(2, "ccw_device_offline returned %d, "
+ CIO_MSG_EVENT(0, "ccw_device_offline returned %d, "
"device 0.%x.%04x\n",
ret, cdev->private->dev_id.ssid,
cdev->private->dev_id.devno);
other_sch = to_subchannel(get_device(cdev->dev.parent));
ret = device_move(&cdev->dev, &sch->dev);
if (ret) {
- CIO_MSG_EVENT(2, "Moving disconnected device 0.%x.%04x failed "
+ CIO_MSG_EVENT(0, "Moving disconnected device 0.%x.%04x failed "
"(ret=%d)!\n", cdev->private->dev_id.ssid,
cdev->private->dev_id.devno, ret);
put_device(&other_sch->dev);
ret = device_reprobe(&cdev->dev);
if (ret)
/* We can't do much here. */
- CIO_MSG_EVENT(2, "device_reprobe() returned"
+ CIO_MSG_EVENT(0, "device_reprobe() returned"
" %d for 0.%x.%04x\n", ret,
cdev->private->dev_id.ssid,
cdev->private->dev_id.devno);
rc = device_move(&cdev->dev, &sch->dev);
mutex_unlock(&sch->reg_mutex);
if (rc) {
- CIO_MSG_EVENT(2, "Moving device 0.%x.%04x to subchannel "
+ CIO_MSG_EVENT(0, "Moving device 0.%x.%04x to subchannel "
"0.%x.%04x failed (ret=%d)!\n",
cdev->private->dev_id.ssid,
cdev->private->dev_id.devno, sch->schid.ssid,
wait_event(cdev->private->wait_q,
dev_fsm_final_state(cdev));
else
- //FIXME: we can't fail!
- CIO_MSG_EVENT(2, "ccw_device_offline returned %d, "
+ CIO_MSG_EVENT(0, "ccw_device_offline returned %d, "
"device 0.%x.%04x\n",
ret, cdev->private->dev_id.ssid,
cdev->private->dev_id.devno);
spin_lock_irq(cdev->ccwlock);
switch (cdev->private->state) {
case DEV_STATE_DISCONNECTED:
- CIO_MSG_EVENT(3, "recovery: trigger 0.%x.%04x\n",
+ CIO_MSG_EVENT(4, "recovery: trigger 0.%x.%04x\n",
cdev->private->dev_id.ssid,
cdev->private->dev_id.devno);
dev_fsm_event(cdev, DEV_EVENT_VERIFY);
}
spin_unlock_irq(&recovery_lock);
} else
- CIO_MSG_EVENT(2, "recovery: end\n");
+ CIO_MSG_EVENT(4, "recovery: end\n");
}
static DECLARE_WORK(recovery_work, recovery_work_func);
{
unsigned long flags;
- CIO_MSG_EVENT(2, "recovery: schedule\n");
+ CIO_MSG_EVENT(4, "recovery: schedule\n");
spin_lock_irqsave(&recovery_lock, flags);
if (!timer_pending(&recovery_timer) || (recovery_phase != 0)) {
recovery_phase = 0;
same_dev = 0; /* Keep the compiler quiet... */
switch (state) {
case DEV_STATE_NOT_OPER:
- CIO_DEBUG(KERN_WARNING, 2,
- "SenseID : unknown device %04x on subchannel "
- "0.%x.%04x\n", cdev->private->dev_id.devno,
- sch->schid.ssid, sch->schid.sch_no);
+ CIO_MSG_EVENT(2, "SenseID : unknown device %04x on "
+ "subchannel 0.%x.%04x\n",
+ cdev->private->dev_id.devno,
+ sch->schid.ssid, sch->schid.sch_no);
break;
case DEV_STATE_OFFLINE:
if (cdev->private->state == DEV_STATE_DISCONNECTED_SENSE_ID) {
return;
}
/* Issue device info message. */
- CIO_DEBUG(KERN_INFO, 2,
- "SenseID : device 0.%x.%04x reports: "
- "CU Type/Mod = %04X/%02X, Dev Type/Mod = "
- "%04X/%02X\n",
- cdev->private->dev_id.ssid,
- cdev->private->dev_id.devno,
- cdev->id.cu_type, cdev->id.cu_model,
- cdev->id.dev_type, cdev->id.dev_model);
+ CIO_MSG_EVENT(4, "SenseID : device 0.%x.%04x reports: "
+ "CU Type/Mod = %04X/%02X, Dev Type/Mod = "
+ "%04X/%02X\n",
+ cdev->private->dev_id.ssid,
+ cdev->private->dev_id.devno,
+ cdev->id.cu_type, cdev->id.cu_model,
+ cdev->id.dev_type, cdev->id.dev_model);
break;
case DEV_STATE_BOXED:
- CIO_DEBUG(KERN_WARNING, 2,
- "SenseID : boxed device %04x on subchannel "
- "0.%x.%04x\n", cdev->private->dev_id.devno,
- sch->schid.ssid, sch->schid.sch_no);
+ CIO_MSG_EVENT(0, "SenseID : boxed device %04x on "
+ " subchannel 0.%x.%04x\n",
+ cdev->private->dev_id.devno,
+ sch->schid.ssid, sch->schid.sch_no);
break;
}
cdev->private->state = state;
if (state == DEV_STATE_BOXED)
- CIO_DEBUG(KERN_WARNING, 2,
- "Boxed device %04x on subchannel %04x\n",
- cdev->private->dev_id.devno, sch->schid.sch_no);
+ CIO_MSG_EVENT(0, "Boxed device %04x on subchannel %04x\n",
+ cdev->private->dev_id.devno, sch->schid.sch_no);
if (cdev->private->flags.donotify) {
cdev->private->flags.donotify = 0;
/* Basic sense hasn't started. Try again. */
ccw_device_do_sense(cdev, irb);
else {
- CIO_MSG_EVENT(2, "Huh? 0.%x.%04x: unsolicited "
+ CIO_MSG_EVENT(0, "0.%x.%04x: unsolicited "
"interrupt during w4sense...\n",
cdev->private->dev_id.ssid,
cdev->private->dev_id.devno);
static void
ccw_device_bug(struct ccw_device *cdev, enum dev_event dev_event)
{
- CIO_MSG_EVENT(0, "dev_jumptable[%i][%i] == NULL\n",
- cdev->private->state, dev_event);
+ CIO_MSG_EVENT(0, "Internal state [%i][%i] not handled for device "
+ "0.%x.%04x\n", cdev->private->state, dev_event,
+ cdev->private->dev_id.ssid,
+ cdev->private->dev_id.devno);
BUG();
}
* sense id information. So, for intervention required,
* we use the "whack it until it talks" strategy...
*/
- CIO_MSG_EVENT(2, "SenseID : device %04x on Subchannel "
+ CIO_MSG_EVENT(0, "SenseID : device %04x on Subchannel "
"0.%x.%04x reports cmd reject\n",
cdev->private->dev_id.devno, sch->schid.ssid,
sch->schid.sch_no);
lpm = to_io_private(sch)->orb.lpm;
if ((lpm & sch->schib.pmcw.pim & sch->schib.pmcw.pam) != 0)
- CIO_MSG_EVENT(2, "SenseID : path %02X for device %04x "
+ CIO_MSG_EVENT(4, "SenseID : path %02X for device %04x "
"on subchannel 0.%x.%04x is "
"'not operational'\n", lpm,
cdev->private->dev_id.devno,
/* ret is 0, -EBUSY, -EACCES or -ENODEV */
if (ret != -EACCES)
return ret;
- CIO_MSG_EVENT(2, "SNID - Device %04x on Subchannel "
+ CIO_MSG_EVENT(3, "SNID - Device %04x on Subchannel "
"0.%x.%04x, lpm %02X, became 'not "
"operational'\n",
cdev->private->dev_id.devno,
u8 lpm;
lpm = to_io_private(sch)->orb.lpm;
- CIO_MSG_EVENT(2, "SNID - Device %04x on Subchannel 0.%x.%04x,"
+ CIO_MSG_EVENT(3, "SNID - Device %04x on Subchannel 0.%x.%04x,"
" lpm %02X, became 'not operational'\n",
cdev->private->dev_id.devno, sch->schid.ssid,
sch->schid.sch_no, lpm);
return ret;
}
/* PGID command failed on this path. */
- CIO_MSG_EVENT(2, "SPID - Device %04x on Subchannel "
+ CIO_MSG_EVENT(3, "SPID - Device %04x on Subchannel "
"0.%x.%04x, lpm %02X, became 'not operational'\n",
cdev->private->dev_id.devno, sch->schid.ssid,
sch->schid.sch_no, cdev->private->imask);
return ret;
}
/* nop command failed on this path. */
- CIO_MSG_EVENT(2, "NOP - Device %04x on Subchannel "
+ CIO_MSG_EVENT(3, "NOP - Device %04x on Subchannel "
"0.%x.%04x, lpm %02X, became 'not operational'\n",
cdev->private->dev_id.devno, sch->schid.ssid,
sch->schid.sch_no, cdev->private->imask);
return -EAGAIN;
}
if (irb->scsw.cc == 3) {
- CIO_MSG_EVENT(2, "SPID - Device %04x on Subchannel 0.%x.%04x,"
+ CIO_MSG_EVENT(3, "SPID - Device %04x on Subchannel 0.%x.%04x,"
" lpm %02X, became 'not operational'\n",
cdev->private->dev_id.devno, sch->schid.ssid,
sch->schid.sch_no, cdev->private->imask);
return -ETIME;
}
if (irb->scsw.cc == 3) {
- CIO_MSG_EVENT(2, "NOP - Device %04x on Subchannel 0.%x.%04x,"
+ CIO_MSG_EVENT(3, "NOP - Device %04x on Subchannel 0.%x.%04x,"
" lpm %02X, became 'not operational'\n",
cdev->private->dev_id.devno, sch->schid.ssid,
sch->schid.sch_no, cdev->private->imask);