--- /dev/null
+From 91b632803ee4e47c5a5c4dc3d8bf5abf9c16107a Mon Sep 17 00:00:00 2001
+From: Tobias Klauser <tklauser@distanz.ch>
+Date: Mon, 13 Feb 2017 11:14:09 +0100
+Subject: [PATCH] brcmfmac: Use net_device_stats from struct net_device
+
+Instead of using a private copy of struct net_device_stats in struct
+brcm_if, use stats from struct net_device. Also remove the now
+unnecessary .ndo_get_stats function.
+
+Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
+Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../wireless/broadcom/brcm80211/brcmfmac/core.c | 26 +++++++---------------
+ .../wireless/broadcom/brcm80211/brcmfmac/core.h | 2 --
+ 2 files changed, 8 insertions(+), 20 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -249,10 +249,10 @@ static netdev_tx_t brcmf_netdev_start_xm
+
+ done:
+ if (ret) {
+- ifp->stats.tx_dropped++;
++ ndev->stats.tx_dropped++;
+ } else {
+- ifp->stats.tx_packets++;
+- ifp->stats.tx_bytes += skb->len;
++ ndev->stats.tx_packets++;
++ ndev->stats.tx_bytes += skb->len;
+ }
+
+ /* Return ok: we always eat the packet */
+@@ -296,15 +296,15 @@ void brcmf_txflowblock(struct device *de
+ void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb)
+ {
+ if (skb->pkt_type == PACKET_MULTICAST)
+- ifp->stats.multicast++;
++ ifp->ndev->stats.multicast++;
+
+ if (!(ifp->ndev->flags & IFF_UP)) {
+ brcmu_pkt_buf_free_skb(skb);
+ return;
+ }
+
+- ifp->stats.rx_bytes += skb->len;
+- ifp->stats.rx_packets++;
++ ifp->ndev->stats.rx_bytes += skb->len;
++ ifp->ndev->stats.rx_packets++;
+
+ brcmf_dbg(DATA, "rx proto=0x%X\n", ntohs(skb->protocol));
+ if (in_interrupt())
+@@ -327,7 +327,7 @@ static int brcmf_rx_hdrpull(struct brcmf
+
+ if (ret || !(*ifp) || !(*ifp)->ndev) {
+ if (ret != -ENODATA && *ifp)
+- (*ifp)->stats.rx_errors++;
++ (*ifp)->ndev->stats.rx_errors++;
+ brcmu_pkt_buf_free_skb(skb);
+ return -ENODATA;
+ }
+@@ -388,7 +388,7 @@ void brcmf_txfinalize(struct brcmf_if *i
+ }
+
+ if (!success)
+- ifp->stats.tx_errors++;
++ ifp->ndev->stats.tx_errors++;
+
+ brcmu_pkt_buf_free_skb(txp);
+ }
+@@ -411,15 +411,6 @@ void brcmf_txcomplete(struct device *dev
+ }
+ }
+
+-static struct net_device_stats *brcmf_netdev_get_stats(struct net_device *ndev)
+-{
+- struct brcmf_if *ifp = netdev_priv(ndev);
+-
+- brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx);
+-
+- return &ifp->stats;
+-}
+-
+ static void brcmf_ethtool_get_drvinfo(struct net_device *ndev,
+ struct ethtool_drvinfo *info)
+ {
+@@ -492,7 +483,6 @@ static int brcmf_netdev_open(struct net_
+ static const struct net_device_ops brcmf_netdev_ops_pri = {
+ .ndo_open = brcmf_netdev_open,
+ .ndo_stop = brcmf_netdev_stop,
+- .ndo_get_stats = brcmf_netdev_get_stats,
+ .ndo_start_xmit = brcmf_netdev_start_xmit,
+ .ndo_set_mac_address = brcmf_netdev_set_mac_address,
+ .ndo_set_rx_mode = brcmf_netdev_set_multicast_list
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
+@@ -171,7 +171,6 @@ enum brcmf_netif_stop_reason {
+ * @drvr: points to device related information.
+ * @vif: points to cfg80211 specific interface information.
+ * @ndev: associated network device.
+- * @stats: interface specific network statistics.
+ * @multicast_work: worker object for multicast provisioning.
+ * @ndoffload_work: worker object for neighbor discovery offload configuration.
+ * @fws_desc: interface specific firmware-signalling descriptor.
+@@ -187,7 +186,6 @@ struct brcmf_if {
+ struct brcmf_pub *drvr;
+ struct brcmf_cfg80211_vif *vif;
+ struct net_device *ndev;
+- struct net_device_stats stats;
+ struct work_struct multicast_work;
+ struct work_struct ndoffload_work;
+ struct brcmf_fws_mac_descriptor *fws_desc;
--- /dev/null
+From f1ac3aa212af6dd0a36dc07a63f95f91be6f4935 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 24 Feb 2017 17:32:46 +0100
+Subject: [PATCH] brcmfmac: always print error when PSM's watchdog fires
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+So far we were attaching BRCMF_E_PSM_WATCHDOG event listener in
+brcmf_debug_attach which gets compiled only with CONFIG_BRCMDBG. This
+event means something went wrong and firmware / hardware usually can't
+be expected to work (reliably).
+
+Such a problem is significant for user experience so I believe we should
+print an error unconditionally (even with debugging disabled). What can
+be indeed optional is dumping bus memory as this is clearly part of
+debugging process.
+
+In the future we may also try to extend this listener by trying to
+recover from the error or at least signal it to the cfg80211.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../wireless/broadcom/brcm80211/brcmfmac/core.c | 22 ++++++++++++++++++
+ .../wireless/broadcom/brcm80211/brcmfmac/debug.c | 26 +++-------------------
+ .../wireless/broadcom/brcm80211/brcmfmac/debug.h | 9 ++++++++
+ 3 files changed, 34 insertions(+), 23 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -738,6 +738,24 @@ void brcmf_remove_interface(struct brcmf
+ brcmf_del_if(ifp->drvr, ifp->bsscfgidx, rtnl_locked);
+ }
+
++static int brcmf_psm_watchdog_notify(struct brcmf_if *ifp,
++ const struct brcmf_event_msg *evtmsg,
++ void *data)
++{
++ int err;
++
++ brcmf_dbg(TRACE, "enter: bsscfgidx=%d\n", ifp->bsscfgidx);
++
++ brcmf_err("PSM's watchdog has fired!\n");
++
++ err = brcmf_debug_create_memdump(ifp->drvr->bus_if, data,
++ evtmsg->datalen);
++ if (err)
++ brcmf_err("Failed to get memory dump, %d\n", err);
++
++ return err;
++}
++
+ #ifdef CONFIG_INET
+ #define ARPOL_MAX_ENTRIES 8
+ static int brcmf_inetaddr_changed(struct notifier_block *nb,
+@@ -917,6 +935,10 @@ int brcmf_attach(struct device *dev, str
+ goto fail;
+ }
+
++ /* Attach to events important for core code */
++ brcmf_fweh_register(drvr, BRCMF_E_PSM_WATCHDOG,
++ brcmf_psm_watchdog_notify);
++
+ /* attach firmware event handler */
+ brcmf_fweh_attach(drvr);
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.c
+@@ -27,8 +27,8 @@
+
+ static struct dentry *root_folder;
+
+-static int brcmf_debug_create_memdump(struct brcmf_bus *bus, const void *data,
+- size_t len)
++int brcmf_debug_create_memdump(struct brcmf_bus *bus, const void *data,
++ size_t len)
+ {
+ void *dump;
+ size_t ramsize;
+@@ -54,24 +54,6 @@ static int brcmf_debug_create_memdump(st
+ return 0;
+ }
+
+-static int brcmf_debug_psm_watchdog_notify(struct brcmf_if *ifp,
+- const struct brcmf_event_msg *evtmsg,
+- void *data)
+-{
+- int err;
+-
+- brcmf_dbg(TRACE, "enter: bsscfgidx=%d\n", ifp->bsscfgidx);
+-
+- brcmf_err("PSM's watchdog has fired!\n");
+-
+- err = brcmf_debug_create_memdump(ifp->drvr->bus_if, data,
+- evtmsg->datalen);
+- if (err)
+- brcmf_err("Failed to get memory dump, %d\n", err);
+-
+- return err;
+-}
+-
+ void brcmf_debugfs_init(void)
+ {
+ root_folder = debugfs_create_dir(KBUILD_MODNAME, NULL);
+@@ -99,9 +81,7 @@ int brcmf_debug_attach(struct brcmf_pub
+ if (IS_ERR(drvr->dbgfs_dir))
+ return PTR_ERR(drvr->dbgfs_dir);
+
+-
+- return brcmf_fweh_register(drvr, BRCMF_E_PSM_WATCHDOG,
+- brcmf_debug_psm_watchdog_notify);
++ return 0;
+ }
+
+ void brcmf_debug_detach(struct brcmf_pub *drvr)
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
+@@ -99,6 +99,7 @@ do { \
+
+ extern int brcmf_msg_level;
+
++struct brcmf_bus;
+ struct brcmf_pub;
+ #ifdef DEBUG
+ void brcmf_debugfs_init(void);
+@@ -108,6 +109,8 @@ void brcmf_debug_detach(struct brcmf_pub
+ struct dentry *brcmf_debugfs_get_devdir(struct brcmf_pub *drvr);
+ int brcmf_debugfs_add_entry(struct brcmf_pub *drvr, const char *fn,
+ int (*read_fn)(struct seq_file *seq, void *data));
++int brcmf_debug_create_memdump(struct brcmf_bus *bus, const void *data,
++ size_t len);
+ #else
+ static inline void brcmf_debugfs_init(void)
+ {
+@@ -128,6 +131,12 @@ int brcmf_debugfs_add_entry(struct brcmf
+ {
+ return 0;
+ }
++static inline
++int brcmf_debug_create_memdump(struct brcmf_bus *bus, const void *data,
++ size_t len)
++{
++ return 0;
++}
+ #endif
+
+ #endif /* BRCMFMAC_DEBUG_H */
--- /dev/null
+From d79fe4cb70d8deab7b8dc1de547ed4b915574414 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Wed, 8 Mar 2017 14:50:15 +0100
+Subject: [PATCH] brcmfmac: Do not print the firmware version as an error
+
+Using pr_err for things which are not errors is a bad idea. E.g. it
+will cause the plymouth bootsplash screen to drop back to the text
+console so that the user can see the error, which is not what we
+normally want to happen.
+
+Instead add a new brcmf_info macro and use that.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 2 +-
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h | 9 +++++++++
+ 2 files changed, 10 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+@@ -161,7 +161,7 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
+ strsep(&ptr, "\n");
+
+ /* Print fw version info */
+- brcmf_err("Firmware version = %s\n", buf);
++ brcmf_info("Firmware version = %s\n", buf);
+
+ /* locate firmware version number for ethtool */
+ ptr = strrchr(buf, ' ') + 1;
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
+@@ -59,6 +59,10 @@ void __brcmf_err(const char *func, const
+ } while (0)
+
+ #if defined(DEBUG) || defined(CPTCFG_BRCM_TRACING)
++
++/* For debug/tracing purposes treat info messages as errors */
++#define brcmf_info brcmf_err
++
+ __printf(3, 4)
+ void __brcmf_dbg(u32 level, const char *func, const char *fmt, ...);
+ #define brcmf_dbg(level, fmt, ...) \
+@@ -77,6 +81,11 @@ do { \
+
+ #else /* defined(DEBUG) || defined(CPTCFG_BRCM_TRACING) */
+
++#define brcmf_info(fmt, ...) \
++ do { \
++ pr_info("%s: " fmt, __func__, ##__VA_ARGS__); \
++ } while (0)
++
+ #define brcmf_dbg(level, fmt, ...) no_printk(fmt, ##__VA_ARGS__)
+
+ #define BRCMF_DATA_ON() 0
--- /dev/null
+From 26e537884a8ef451f5c60f6949b1615069931ffa Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Wed, 8 Mar 2017 14:50:16 +0100
+Subject: [PATCH] brcmfmac: Do not complain about country code "00"
+
+The country code gets set to "00" by default at boot, ignore this
+rather then logging an error about it.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -6736,6 +6736,10 @@ static void brcmf_cfg80211_reg_notifier(
+ s32 err;
+ int i;
+
++ /* The country code gets set to "00" by default at boot, ignore */
++ if (req->alpha2[0] == '0' && req->alpha2[1] == '0')
++ return;
++
+ /* ignore non-ISO3166 country codes */
+ for (i = 0; i < sizeof(req->alpha2); i++)
+ if (req->alpha2[i] < 'A' || req->alpha2[i] > 'Z') {
--- /dev/null
+From b9472a2e3e452c414634b3ccb1ef6c4098878686 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Wed, 8 Mar 2017 14:50:17 +0100
+Subject: [PATCH] brcmfmac: Handle status == BRCMF_E_STATUS_ABORT in
+ cfg80211_escan_handler
+
+If a scan gets aborted BRCMF_SCAN_STATUS_BUSY gets cleared in
+cfg->scan_status and when we receive an abort event from the firmware
+the BRCMF_SCAN_STATUS_BUSY check in the cfg80211_escan_handler will
+trigger resulting in multiple errors getting logged.
+
+Check for a status of BRCMF_E_STATUS_ABORT and in this case simply
+cleanly exit the cfg80211_escan_handler. This also avoids a
+BRCMF_E_STATUS_ABORT event arriving after a new scan has been started
+causing the new scan to complete prematurely without any data.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -3097,6 +3097,9 @@ brcmf_cfg80211_escan_handler(struct brcm
+
+ status = e->status;
+
++ if (status == BRCMF_E_STATUS_ABORT)
++ goto exit;
++
+ if (!test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
+ brcmf_err("scan not ready, bsscfgidx=%d\n", ifp->bsscfgidx);
+ return -EPERM;
--- /dev/null
+From 20ec4f57498f8770c7a1a3e2a316fa752a424178 Mon Sep 17 00:00:00 2001
+From: Franky Lin <franky.lin@broadcom.com>
+Date: Fri, 10 Mar 2017 21:17:02 +0000
+Subject: [PATCH] brcmfmac: move brcmf_txflowblock to bcdc layer
+
+brcmf_txflowblock is invoked by sdio and usb bus module which are using
+bcdc protocol. This patch makes it a bcdc API instead of a core module
+function.
+
+Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c | 10 ++++++++++
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h | 1 +
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h | 2 --
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 10 ----------
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 5 +++--
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 5 +++--
+ 6 files changed, 17 insertions(+), 16 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
+@@ -345,6 +345,16 @@ brcmf_proto_bcdc_txdata(struct brcmf_pub
+ return brcmf_bus_txdata(drvr->bus_if, pktbuf);
+ }
+
++void brcmf_proto_bcdc_txflowblock(struct device *dev, bool state)
++{
++ struct brcmf_bus *bus_if = dev_get_drvdata(dev);
++ struct brcmf_pub *drvr = bus_if->drvr;
++
++ brcmf_dbg(TRACE, "Enter\n");
++
++ brcmf_fws_bus_blocked(drvr, state);
++}
++
+ static void
+ brcmf_proto_bcdc_configure_addr_mode(struct brcmf_pub *drvr, int ifidx,
+ enum proto_addr_mode addr_mode)
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h
+@@ -19,6 +19,7 @@
+ #ifdef CPTCFG_BRCMFMAC_PROTO_BCDC
+ int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr);
+ void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr);
++void brcmf_proto_bcdc_txflowblock(struct device *dev, bool state);
+ #else
+ static inline int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr) { return 0; }
+ static inline void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr) {}
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
+@@ -229,8 +229,6 @@ int brcmf_attach(struct device *dev, str
+ void brcmf_detach(struct device *dev);
+ /* Indication from bus module that dongle should be reset */
+ void brcmf_dev_reset(struct device *dev);
+-/* Indication from bus module to change flow-control state */
+-void brcmf_txflowblock(struct device *dev, bool state);
+
+ /* Notify the bus has transferred the tx packet to firmware */
+ void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -283,16 +283,6 @@ void brcmf_txflowblock_if(struct brcmf_i
+ spin_unlock_irqrestore(&ifp->netif_stop_lock, flags);
+ }
+
+-void brcmf_txflowblock(struct device *dev, bool state)
+-{
+- struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+- struct brcmf_pub *drvr = bus_if->drvr;
+-
+- brcmf_dbg(TRACE, "Enter\n");
+-
+- brcmf_fws_bus_blocked(drvr, state);
+-}
+-
+ void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb)
+ {
+ if (skb->pkt_type == PACKET_MULTICAST)
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -44,6 +44,7 @@
+ #include "firmware.h"
+ #include "core.h"
+ #include "common.h"
++#include "bcdc.h"
+
+ #define DCMD_RESP_TIMEOUT msecs_to_jiffies(2500)
+ #define CTL_DONE_TIMEOUT msecs_to_jiffies(2500)
+@@ -2328,7 +2329,7 @@ static uint brcmf_sdio_sendfromq(struct
+ if ((bus->sdiodev->state == BRCMF_SDIOD_DATA) &&
+ bus->txoff && (pktq_len(&bus->txq) < TXLOW)) {
+ bus->txoff = false;
+- brcmf_txflowblock(bus->sdiodev->dev, false);
++ brcmf_proto_bcdc_txflowblock(bus->sdiodev->dev, false);
+ }
+
+ return cnt;
+@@ -2753,7 +2754,7 @@ static int brcmf_sdio_bus_txdata(struct
+
+ if (pktq_len(&bus->txq) >= TXHI) {
+ bus->txoff = true;
+- brcmf_txflowblock(dev, true);
++ brcmf_proto_bcdc_txflowblock(dev, true);
+ }
+ spin_unlock_bh(&bus->txq_lock);
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+@@ -29,6 +29,7 @@
+ #include "usb.h"
+ #include "core.h"
+ #include "common.h"
++#include "bcdc.h"
+
+
+ #define IOCTL_RESP_TIMEOUT msecs_to_jiffies(2000)
+@@ -488,7 +489,7 @@ static void brcmf_usb_tx_complete(struct
+ spin_lock_irqsave(&devinfo->tx_flowblock_lock, flags);
+ if (devinfo->tx_freecount > devinfo->tx_high_watermark &&
+ devinfo->tx_flowblock) {
+- brcmf_txflowblock(devinfo->dev, false);
++ brcmf_proto_bcdc_txflowblock(devinfo->dev, false);
+ devinfo->tx_flowblock = false;
+ }
+ spin_unlock_irqrestore(&devinfo->tx_flowblock_lock, flags);
+@@ -635,7 +636,7 @@ static int brcmf_usb_tx(struct device *d
+ spin_lock_irqsave(&devinfo->tx_flowblock_lock, flags);
+ if (devinfo->tx_freecount < devinfo->tx_low_watermark &&
+ !devinfo->tx_flowblock) {
+- brcmf_txflowblock(dev, true);
++ brcmf_proto_bcdc_txflowblock(dev, true);
+ devinfo->tx_flowblock = true;
+ }
+ spin_unlock_irqrestore(&devinfo->tx_flowblock_lock, flags);
--- /dev/null
+From 7b584396b7a760bc77bbde4625f83ef173159d3e Mon Sep 17 00:00:00 2001
+From: Franky Lin <franky.lin@broadcom.com>
+Date: Fri, 10 Mar 2017 21:17:03 +0000
+Subject: [PATCH] brcmfmac: move brcmf_txcomplete to bcdc layer
+
+brcmf_txcomplete is invoked by sdio and usb bus module which are using
+bcdc protocol. So move it from core module into bcdc layer.
+
+Signed-off-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c | 20 ++++++++++++++++++++
+ .../net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h | 2 ++
+ .../net/wireless/broadcom/brcm80211/brcmfmac/bus.h | 3 ---
+ .../net/wireless/broadcom/brcm80211/brcmfmac/core.c | 18 ------------------
+ .../net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 3 ++-
+ .../net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 2 +-
+ 6 files changed, 25 insertions(+), 23 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
+@@ -355,6 +355,26 @@ void brcmf_proto_bcdc_txflowblock(struct
+ brcmf_fws_bus_blocked(drvr, state);
+ }
+
++void
++brcmf_proto_bcdc_txcomplete(struct device *dev, struct sk_buff *txp,
++ bool success)
++{
++ struct brcmf_bus *bus_if = dev_get_drvdata(dev);
++ struct brcmf_pub *drvr = bus_if->drvr;
++ struct brcmf_if *ifp;
++
++ /* await txstatus signal for firmware if active */
++ if (brcmf_fws_fc_active(drvr->fws)) {
++ if (!success)
++ brcmf_fws_bustxfail(drvr->fws, txp);
++ } else {
++ if (brcmf_proto_bcdc_hdrpull(drvr, false, txp, &ifp))
++ brcmu_pkt_buf_free_skb(txp);
++ else
++ brcmf_txfinalize(ifp, txp, success);
++ }
++}
++
+ static void
+ brcmf_proto_bcdc_configure_addr_mode(struct brcmf_pub *drvr, int ifidx,
+ enum proto_addr_mode addr_mode)
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h
+@@ -20,6 +20,8 @@
+ int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr);
+ void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr);
+ void brcmf_proto_bcdc_txflowblock(struct device *dev, bool state);
++void brcmf_proto_bcdc_txcomplete(struct device *dev, struct sk_buff *txp,
++ bool success);
+ #else
+ static inline int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr) { return 0; }
+ static inline void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr) {}
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
+@@ -230,9 +230,6 @@ void brcmf_detach(struct device *dev);
+ /* Indication from bus module that dongle should be reset */
+ void brcmf_dev_reset(struct device *dev);
+
+-/* Notify the bus has transferred the tx packet to firmware */
+-void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success);
+-
+ /* Configure the "global" bus state used by upper layers */
+ void brcmf_bus_change_state(struct brcmf_bus *bus, enum brcmf_bus_state state);
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -383,24 +383,6 @@ void brcmf_txfinalize(struct brcmf_if *i
+ brcmu_pkt_buf_free_skb(txp);
+ }
+
+-void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success)
+-{
+- struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+- struct brcmf_pub *drvr = bus_if->drvr;
+- struct brcmf_if *ifp;
+-
+- /* await txstatus signal for firmware if active */
+- if (brcmf_fws_fc_active(drvr->fws)) {
+- if (!success)
+- brcmf_fws_bustxfail(drvr->fws, txp);
+- } else {
+- if (brcmf_proto_hdrpull(drvr, false, txp, &ifp))
+- brcmu_pkt_buf_free_skb(txp);
+- else
+- brcmf_txfinalize(ifp, txp, success);
+- }
+-}
+-
+ static void brcmf_ethtool_get_drvinfo(struct net_device *ndev,
+ struct ethtool_drvinfo *info)
+ {
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -2266,7 +2266,8 @@ done:
+ bus->tx_seq = (bus->tx_seq + pktq->qlen) % SDPCM_SEQ_WRAP;
+ skb_queue_walk_safe(pktq, pkt_next, tmp) {
+ __skb_unlink(pkt_next, pktq);
+- brcmf_txcomplete(bus->sdiodev->dev, pkt_next, ret == 0);
++ brcmf_proto_bcdc_txcomplete(bus->sdiodev->dev, pkt_next,
++ ret == 0);
+ }
+ return ret;
+ }
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+@@ -483,7 +483,7 @@ static void brcmf_usb_tx_complete(struct
+ req->skb);
+ brcmf_usb_del_fromq(devinfo, req);
+
+- brcmf_txcomplete(devinfo->dev, req->skb, urb->status == 0);
++ brcmf_proto_bcdc_txcomplete(devinfo->dev, req->skb, urb->status == 0);
+ req->skb = NULL;
+ brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req, &devinfo->tx_freecount);
+ spin_lock_irqsave(&devinfo->tx_flowblock_lock, flags);
--- /dev/null
+From 9fdc64bbdbe7bd546e0fbcedd2f1c03448c6df42 Mon Sep 17 00:00:00 2001
+From: Franky Lin <franky.lin@broadcom.com>
+Date: Fri, 10 Mar 2017 21:17:04 +0000
+Subject: [PATCH] brcmfmac: wrap brcmf_fws_add_interface into bcdc layer
+
+fwsignal is only used by bcdc. Create a new protocol interface function
+brcmf_proto_add_if for core module to notify protocol layer upon a new
+interface is created.
+
+Signed-off-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c | 7 +++++++
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 2 +-
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c | 3 ++-
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h | 9 +++++++++
+ 4 files changed, 19 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
+@@ -399,6 +399,12 @@ static void brcmf_proto_bcdc_rxreorder(s
+ brcmf_fws_rxreorder(ifp, skb);
+ }
+
++static void
++brcmf_proto_bcdc_add_if(struct brcmf_if *ifp)
++{
++ brcmf_fws_add_interface(ifp);
++}
++
+ int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr)
+ {
+ struct brcmf_bcdc *bcdc;
+@@ -422,6 +428,7 @@ int brcmf_proto_bcdc_attach(struct brcmf
+ drvr->proto->delete_peer = brcmf_proto_bcdc_delete_peer;
+ drvr->proto->add_tdls_peer = brcmf_proto_bcdc_add_tdls_peer;
+ drvr->proto->rxreorder = brcmf_proto_bcdc_rxreorder;
++ drvr->proto->add_if = brcmf_proto_bcdc_add_if;
+ drvr->proto->pd = bcdc;
+
+ drvr->hdrlen += BCDC_HEADER_LEN + BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES;
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -990,7 +990,7 @@ int brcmf_bus_started(struct device *dev
+ if (ret < 0)
+ goto fail;
+
+- brcmf_fws_add_interface(ifp);
++ brcmf_proto_add_if(drvr, ifp);
+
+ drvr->config = brcmf_cfg80211_attach(drvr, bus_if->dev,
+ drvr->settings->p2p_enable);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
+@@ -25,6 +25,7 @@
+ #include "fwsignal.h"
+ #include "fweh.h"
+ #include "fwil.h"
++#include "proto.h"
+
+ /**
+ * struct brcmf_fweh_queue_item - event item on event queue.
+@@ -172,7 +173,7 @@ static void brcmf_fweh_handle_if_event(s
+ if (IS_ERR(ifp))
+ return;
+ if (!is_p2pdev)
+- brcmf_fws_add_interface(ifp);
++ brcmf_proto_add_if(drvr, ifp);
+ if (!drvr->fweh.evt_handler[BRCMF_E_IF])
+ if (brcmf_net_attach(ifp, false) < 0)
+ return;
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
+@@ -44,6 +44,7 @@ struct brcmf_proto {
+ void (*add_tdls_peer)(struct brcmf_pub *drvr, int ifidx,
+ u8 peer[ETH_ALEN]);
+ void (*rxreorder)(struct brcmf_if *ifp, struct sk_buff *skb);
++ void (*add_if)(struct brcmf_if *ifp);
+ void *pd;
+ };
+
+@@ -118,4 +119,12 @@ brcmf_proto_rxreorder(struct brcmf_if *i
+ ifp->drvr->proto->rxreorder(ifp, skb);
+ }
+
++static inline void
++brcmf_proto_add_if(struct brcmf_pub *drvr, struct brcmf_if *ifp)
++{
++ if (!drvr->proto->add_if)
++ return;
++ drvr->proto->add_if(ifp);
++}
++
+ #endif /* BRCMFMAC_PROTO_H */
--- /dev/null
+From c02a5eb82056f75615cb48aa540bfd245f489b99 Mon Sep 17 00:00:00 2001
+From: Franky Lin <franky.lin@broadcom.com>
+Date: Fri, 10 Mar 2017 21:17:05 +0000
+Subject: [PATCH] brcmfmac: wrap brcmf_fws_del_interface into bcdc layer
+
+Create a new protocol interface function brcmf_proto_del_if for core
+module to notify protocol layer upon interface deletion.
+
+Signed-off-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c | 7 +++++++
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 4 ++--
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h | 9 +++++++++
+ 3 files changed, 18 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
+@@ -405,6 +405,12 @@ brcmf_proto_bcdc_add_if(struct brcmf_if
+ brcmf_fws_add_interface(ifp);
+ }
+
++static void
++brcmf_proto_bcdc_del_if(struct brcmf_if *ifp)
++{
++ brcmf_fws_del_interface(ifp);
++}
++
+ int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr)
+ {
+ struct brcmf_bcdc *bcdc;
+@@ -429,6 +435,7 @@ int brcmf_proto_bcdc_attach(struct brcmf
+ drvr->proto->add_tdls_peer = brcmf_proto_bcdc_add_tdls_peer;
+ drvr->proto->rxreorder = brcmf_proto_bcdc_rxreorder;
+ drvr->proto->add_if = brcmf_proto_bcdc_add_if;
++ drvr->proto->del_if = brcmf_proto_bcdc_del_if;
+ drvr->proto->pd = bcdc;
+
+ drvr->hdrlen += BCDC_HEADER_LEN + BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES;
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -706,7 +706,7 @@ void brcmf_remove_interface(struct brcmf
+ return;
+ brcmf_dbg(TRACE, "Enter, bsscfgidx=%d, ifidx=%d\n", ifp->bsscfgidx,
+ ifp->ifidx);
+- brcmf_fws_del_interface(ifp);
++ brcmf_proto_del_if(ifp->drvr, ifp);
+ brcmf_del_if(ifp->drvr, ifp->bsscfgidx, rtnl_locked);
+ }
+
+@@ -1035,7 +1035,7 @@ fail:
+ drvr->config = NULL;
+ }
+ if (drvr->fws) {
+- brcmf_fws_del_interface(ifp);
++ brcmf_proto_del_if(ifp->drvr, ifp);
+ brcmf_fws_deinit(drvr);
+ }
+ brcmf_net_detach(ifp->ndev, false);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
+@@ -45,6 +45,7 @@ struct brcmf_proto {
+ u8 peer[ETH_ALEN]);
+ void (*rxreorder)(struct brcmf_if *ifp, struct sk_buff *skb);
+ void (*add_if)(struct brcmf_if *ifp);
++ void (*del_if)(struct brcmf_if *ifp);
+ void *pd;
+ };
+
+@@ -127,4 +128,12 @@ brcmf_proto_add_if(struct brcmf_pub *drv
+ drvr->proto->add_if(ifp);
+ }
+
++static inline void
++brcmf_proto_del_if(struct brcmf_pub *drvr, struct brcmf_if *ifp)
++{
++ if (!drvr->proto->del_if)
++ return;
++ drvr->proto->del_if(ifp);
++}
++
+ #endif /* BRCMFMAC_PROTO_H */
--- /dev/null
+From 66ded1f8b33cdd9d6d3e20f5f8dd23615a110e70 Mon Sep 17 00:00:00 2001
+From: Franky Lin <franky.lin@broadcom.com>
+Date: Fri, 10 Mar 2017 21:17:06 +0000
+Subject: [PATCH] brcmfmac: wrap brcmf_fws_reset_interface into bcdc layer
+
+Create a new protocol interface function brcmf_proto_reset_if for core
+module to notify protocol layer when interface role changes.
+
+Signed-off-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c | 7 +++++++
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c | 3 +--
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h | 9 +++++++++
+ 3 files changed, 17 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
+@@ -411,6 +411,12 @@ brcmf_proto_bcdc_del_if(struct brcmf_if
+ brcmf_fws_del_interface(ifp);
+ }
+
++static void
++brcmf_proto_bcdc_reset_if(struct brcmf_if *ifp)
++{
++ brcmf_fws_reset_interface(ifp);
++}
++
+ int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr)
+ {
+ struct brcmf_bcdc *bcdc;
+@@ -436,6 +442,7 @@ int brcmf_proto_bcdc_attach(struct brcmf
+ drvr->proto->rxreorder = brcmf_proto_bcdc_rxreorder;
+ drvr->proto->add_if = brcmf_proto_bcdc_add_if;
+ drvr->proto->del_if = brcmf_proto_bcdc_del_if;
++ drvr->proto->reset_if = brcmf_proto_bcdc_reset_if;
+ drvr->proto->pd = bcdc;
+
+ drvr->hdrlen += BCDC_HEADER_LEN + BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES;
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
+@@ -22,7 +22,6 @@
+ #include "core.h"
+ #include "debug.h"
+ #include "tracepoint.h"
+-#include "fwsignal.h"
+ #include "fweh.h"
+ #include "fwil.h"
+ #include "proto.h"
+@@ -180,7 +179,7 @@ static void brcmf_fweh_handle_if_event(s
+ }
+
+ if (ifp && ifevent->action == BRCMF_E_IF_CHANGE)
+- brcmf_fws_reset_interface(ifp);
++ brcmf_proto_reset_if(drvr, ifp);
+
+ err = brcmf_fweh_call_event_handler(ifp, emsg->event_code, emsg, data);
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
+@@ -46,6 +46,7 @@ struct brcmf_proto {
+ void (*rxreorder)(struct brcmf_if *ifp, struct sk_buff *skb);
+ void (*add_if)(struct brcmf_if *ifp);
+ void (*del_if)(struct brcmf_if *ifp);
++ void (*reset_if)(struct brcmf_if *ifp);
+ void *pd;
+ };
+
+@@ -136,4 +137,12 @@ brcmf_proto_del_if(struct brcmf_pub *drv
+ drvr->proto->del_if(ifp);
+ }
+
++static inline void
++brcmf_proto_reset_if(struct brcmf_pub *drvr, struct brcmf_if *ifp)
++{
++ if (!drvr->proto->reset_if)
++ return;
++ drvr->proto->reset_if(ifp);
++}
++
+ #endif /* BRCMFMAC_PROTO_H */
+++ /dev/null
-From e374cb32e98fb49e17594424b0445d8438825413 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 24 Feb 2017 17:18:47 +0100
-Subject: [PATCH] brcmfmac: always print error when PSM's watchdog fires
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-So far we were attaching BRCMF_E_PSM_WATCHDOG event listener in
-brcmf_debug_attach which gets compiled only with CONFIG_BRCMDBG. This
-event means something went wrong and firmware / hardware usually can't
-be expected to work (reliably).
-
-Such a problem is significant for user experience so I believe we should
-print an error unconditionally (even with debugging disabled). What can
-be indeed optional is dumping bus memory as this is clearly part of
-debugging process.
-
-In the future we may also try to extend this listener by trying to
-recover from the error or at least signal it to the cfg80211.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- .../wireless/broadcom/brcm80211/brcmfmac/core.c | 22 ++++++++++++++++++
- .../wireless/broadcom/brcm80211/brcmfmac/debug.c | 26 +++-------------------
- .../wireless/broadcom/brcm80211/brcmfmac/debug.h | 9 ++++++++
- 3 files changed, 34 insertions(+), 23 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -748,6 +748,24 @@ void brcmf_remove_interface(struct brcmf
- brcmf_del_if(ifp->drvr, ifp->bsscfgidx, rtnl_locked);
- }
-
-+static int brcmf_psm_watchdog_notify(struct brcmf_if *ifp,
-+ const struct brcmf_event_msg *evtmsg,
-+ void *data)
-+{
-+ int err;
-+
-+ brcmf_dbg(TRACE, "enter: bsscfgidx=%d\n", ifp->bsscfgidx);
-+
-+ brcmf_err("PSM's watchdog has fired!\n");
-+
-+ err = brcmf_debug_create_memdump(ifp->drvr->bus_if, data,
-+ evtmsg->datalen);
-+ if (err)
-+ brcmf_err("Failed to get memory dump, %d\n", err);
-+
-+ return err;
-+}
-+
- #ifdef CONFIG_INET
- #define ARPOL_MAX_ENTRIES 8
- static int brcmf_inetaddr_changed(struct notifier_block *nb,
-@@ -927,6 +945,10 @@ int brcmf_attach(struct device *dev, str
- goto fail;
- }
-
-+ /* Attach to events important for core code */
-+ brcmf_fweh_register(drvr, BRCMF_E_PSM_WATCHDOG,
-+ brcmf_psm_watchdog_notify);
-+
- /* attach firmware event handler */
- brcmf_fweh_attach(drvr);
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.c
-@@ -27,8 +27,8 @@
-
- static struct dentry *root_folder;
-
--static int brcmf_debug_create_memdump(struct brcmf_bus *bus, const void *data,
-- size_t len)
-+int brcmf_debug_create_memdump(struct brcmf_bus *bus, const void *data,
-+ size_t len)
- {
- void *dump;
- size_t ramsize;
-@@ -54,24 +54,6 @@ static int brcmf_debug_create_memdump(st
- return 0;
- }
-
--static int brcmf_debug_psm_watchdog_notify(struct brcmf_if *ifp,
-- const struct brcmf_event_msg *evtmsg,
-- void *data)
--{
-- int err;
--
-- brcmf_dbg(TRACE, "enter: bsscfgidx=%d\n", ifp->bsscfgidx);
--
-- brcmf_err("PSM's watchdog has fired!\n");
--
-- err = brcmf_debug_create_memdump(ifp->drvr->bus_if, data,
-- evtmsg->datalen);
-- if (err)
-- brcmf_err("Failed to get memory dump, %d\n", err);
--
-- return err;
--}
--
- void brcmf_debugfs_init(void)
- {
- root_folder = debugfs_create_dir(KBUILD_MODNAME, NULL);
-@@ -99,9 +81,7 @@ int brcmf_debug_attach(struct brcmf_pub
- if (IS_ERR(drvr->dbgfs_dir))
- return PTR_ERR(drvr->dbgfs_dir);
-
--
-- return brcmf_fweh_register(drvr, BRCMF_E_PSM_WATCHDOG,
-- brcmf_debug_psm_watchdog_notify);
-+ return 0;
- }
-
- void brcmf_debug_detach(struct brcmf_pub *drvr)
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
-@@ -99,6 +99,7 @@ do { \
-
- extern int brcmf_msg_level;
-
-+struct brcmf_bus;
- struct brcmf_pub;
- #ifdef DEBUG
- void brcmf_debugfs_init(void);
-@@ -108,6 +109,8 @@ void brcmf_debug_detach(struct brcmf_pub
- struct dentry *brcmf_debugfs_get_devdir(struct brcmf_pub *drvr);
- int brcmf_debugfs_add_entry(struct brcmf_pub *drvr, const char *fn,
- int (*read_fn)(struct seq_file *seq, void *data));
-+int brcmf_debug_create_memdump(struct brcmf_bus *bus, const void *data,
-+ size_t len);
- #else
- static inline void brcmf_debugfs_init(void)
- {
-@@ -128,6 +131,12 @@ int brcmf_debugfs_add_entry(struct brcmf
- {
- return 0;
- }
-+static inline
-+int brcmf_debug_create_memdump(struct brcmf_bus *bus, const void *data,
-+ size_t len)
-+{
-+ return 0;
-+}
- #endif
-
- #endif /* BRCMFMAC_DEBUG_H */
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -1218,6 +1218,7 @@ int __init brcmf_core_init(void)
+@@ -1180,6 +1180,7 @@ int __init brcmf_core_init(void)
{
if (!schedule_work(&brcmf_driver_work))
return -EBUSY;
projects / openwrt / staging / hauke.git / commitdiff