--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7100.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "aruba,ap-175", "qca,ar7161";
+ model = "Aruba AP-175";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ aliases {
+ led-boot = &led_power_amber;
+ led-failsafe = &led_power_amber;
+ led-upgrade = &led_power_amber;
+ label-mac-device = ð0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* These internal LEDs cannot be seen when case is closed */
+ internal_2g_green {
+ label = "green:internal_2g";
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ internal_5g_green {
+ label = "green:internal_5g";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* These external LEDs are visible from the bottom panel */
+
+ led_power_amber: power_amber {
+ label = "amber:power";
+ gpios = <&gpio_ext 5 GPIO_ACTIVE_HIGH>;
+ panic-indicator;
+ };
+
+ r1_act_blue {
+ label = "blue:r1_act";
+ gpios = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ r1_rssi1_blue {
+ label = "blue:r1_rssi1";
+ gpios = <&gpio_ext 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ r1_rssi2_blue {
+ label = "blue:r1_rssi2";
+ gpios = <&gpio_ext 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ r1_rssi3_blue {
+ label = "blue:r1_rssi3";
+ gpios = <&gpio_ext 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ r1_rssi4_blue {
+ label = "blue:r1_rssi4";
+ gpios = <&gpio_ext 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ r0_act_amber {
+ label = "amber:r0_act";
+ gpios = <&gpio_ext 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ r0_rssi1_amber {
+ label = "amber:r0_rssi1";
+ gpios = <&gpio_ext 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ r0_rssi2_amber {
+ label = "amber:r0_rssi2";
+ gpios = <&gpio_ext 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ r0_rssi3_amber {
+ label = "amber:r0_rssi3";
+ gpios = <&gpio_ext 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ r0_rssi4_amber {
+ label = "amber:r0_rssi4";
+ gpios = <&gpio_ext 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ i2c0: i2c {
+ compatible = "i2c-gpio";
+ i2c-gpio,delay-us = <10>;
+ i2c-gpio,timeout-ms = <1>;
+ sda-gpios = <&gpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio 2 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ ath9k0: wifi@0,11 {
+ compatible = "pci168c,0029";
+ nvmem-cells = <&macaddr_hwinfo_1c>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <1>;
+ reg = <0x8800 0 0 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ ath9k1: wifi@0,12 {
+ compatible = "pci168c,0029";
+ nvmem-cells = <&macaddr_hwinfo_1c>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <2>;
+ reg = <0x9000 0 0 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ nvmem-cells = <&macaddr_hwinfo_1c>;
+ nvmem-cell-names = "mac-address";
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x40000 0xfa0000>;
+ compatible = "denx,uimage";
+ };
+
+ hwinfo: partition@fe0000 {
+ label = "hwinfo";
+ reg = <0xfe0000 0x10000>;
+ read-only;
+ };
+
+ partition@ff0000 {
+ label = "u-boot-env";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&hwinfo {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_hwinfo_1c: macaddr@1c {
+ reg = <0x1c 0x6>;
+ };
+};
+
+&i2c0 {
+ gpio_ext: gpio@21 {
+ status = "okay";
+
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ temp-sensor@4a {
+ compatible = "national,lm75";
+ reg = <0x4a>;
+ };
+
+ eeprom@50 { /* 24lc2561 */
+ compatible = "atmel,24c256","at24";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x50>;
+ size = <256>;
+ };
+
+ ds1374c: rtc@68 {
+ status = "okay";
+
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+};
projects / openwrt / staging / thess.git / commitdiff