ath79: add support for Ubiquiti PowerBeam M (XW)

This patch adds support for the Ubiquiti PowerBeam M (XW), e.g. PBE-M5-400,
a 802.11n wireless with a feed+dish form factor. This device was previously
supported by the ar71xx loco-m-xw firmware.

Specifications:
 - Atheros AR9342 SoC
 - 64 MB RAM
 - 8 MB SPI flash
 - 1x 10/100 Mbps Ethernet port, 24 Vdc PoE-in
 - Power and LAN green LEDs
 - 4x RSSI LEDs (red, orange, green, green)
 - UART (115200 8N1)

Flashing via stock GUI:
 - Downgrade to AirOS v5.5.x (latest available is 5.5.10-u2) first (see
   https://openwrt.org/toh/ubiquiti/powerbeam installation instructions)
 - Upload the factory image via AirOS web GUI.

Flashing via TFTP:
 - Use a pointy tool (e.g., unbent paperclip) to keep the
   reset button pressed.
 - Power on the device (keep reset button pressed).
 - Keep pressing until LEDs flash alternatively LED1+LED3 =>
   LED2+LED4 => LED1+LED3, etc.
 - Release reset button.
 - The device starts a TFTP server at 192.168.1.20.
 - Set a static IP on the computer (e.g., 192.168.1.21/24).
 - Upload via tftp the factory image:
    $ tftp 192.168.1.20
    tftp> bin
    tftp> trace
    tftp> put openwrt-ath79-generic-xxxxx-ubnt_powerbeam-m-xw-squashfs-factory.bin

WARNING: so far, no non-destructive method has been discovered for
opening the enclosure to reach the serial console. Internal photos
are available here: https://fcc.io/SWX-NBM5HP

Signed-off-by: Russell Senior <russell@personaltelco.net>

diff --git a/target/linux/ath79/dts/ar9342_ubnt_powerbeam-m-xw.dts b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-m-xw.dts
new file mode 100644 (file)
index 0000000..6db058f
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-m-xw.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9342_ubnt_xw.dtsi"
+
+/ {
+       compatible = "ubnt,powerbeam-m-xw", "ubnt,xw", "qca,ar9342";
+       model = "Ubiquiti PowerBeam M (XW)";
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy-mask = <4>;
+
+       phy4: ethernet-phy@4 {
+               reg = <4>;
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       /* default for ar934x, except for 1000M and 10M */
+       pll-data = <0x02000000 0x00000101 0x00001313>;
+
+       phy-mode = "rgmii-id";
+       phy-handle = <&phy4>;
+
+       gmac-config {
+               device = <&gmac>;
+               rxd-delay = <3>;
+               rxdv-delay = <3>;
+       };
+};

diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index c844c70e4623daa30e9c27f4a9058cbac2281267..8044d0c1f2f21cc87f8029051dc9c3ce21a48336 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -397,6 +397,7 @@ ubnt,nanostation-loco-m-xw|\
 ubnt,nanostation-m|\
 ubnt,nanostation-m-xw|\
 ubnt,picostation-m|\
+ubnt,powerbeam-m-xw|\
 ubnt,powerbridge-m|\
 ubnt,rocket-m)
        ucidef_set_rssimon "wlan0" "200000" "1"

diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 2fa51ab90527737a4d1f454542c668ead3869ceb..b7e9d9584f004b76b23a214c3ff338753605ad38 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -85,6 +85,7 @@ ath79_setup_interfaces()
        ubnt,picostation-m|\
        ubnt,powerbeam-5ac-500|\
        ubnt,powerbeam-5ac-gen2|\
+       ubnt,powerbeam-m-xw|\
        ubnt,powerbridge-m|\
        ubnt,rocket-5ac-lite|\
        ubnt,rocket-m|\

diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk
index f8e1d1e43251365c006cf17417cd997ebf3efa89..e8ea06a07a46a411b92dca106a822cb45d71174d 100644 (file)
--- a/target/linux/ath79/image/generic-ubnt.mk
+++ b/target/linux/ath79/image/generic-ubnt.mk
@@ -328,6 +328,14 @@ define Device/ubnt_powerbeam-5ac-gen2
 endef
 TARGET_DEVICES += ubnt_powerbeam-5ac-gen2
 
+define Device/ubnt_powerbeam-m-xw
+  $(Device/ubnt-xw)
+  DEVICE_MODEL := PowerBeam M
+  DEVICE_PACKAGES += rssileds
+  SUPPORTED_DEVICES += loco-m-xw
+endef
+TARGET_DEVICES += ubnt_powerbeam-m-xw
+
 define Device/ubnt_powerbridge-m
   $(Device/ubnt-xm)
   SOC := ar7241