--- /dev/null
+This is a port of the MMC-SPI driver from 2.6.24.3
+--mb
+
+
+Index: linux-2.6.23.16/drivers/mmc/host/Kconfig
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mmc/host/Kconfig 2008-03-21 17:28:26.000000000 +0100
++++ linux-2.6.23.16/drivers/mmc/host/Kconfig 2008-03-21 17:30:25.000000000 +0100
+@@ -100,3 +100,16 @@ config MMC_TIFM_SD
+ To compile this driver as a module, choose M here: the
+ module will be called tifm_sd.
+
++config MMC_SPI
++ tristate "MMC/SD over SPI (EXPERIMENTAL)"
++ depends on MMC && SPI_MASTER && !HIGHMEM && EXPERIMENTAL
++ select CRC7
++ select CRC_ITU_T
++ help
++ Some systems accss MMC/SD cards using a SPI controller instead of
++ using a "native" MMC/SD controller. This has a disadvantage of
++ being relatively high overhead, but a compensating advantage of
++ working on many systems without dedicated MMC/SD controllers.
++
++ If unsure, or if your system has no SPI master driver, say N.
++
+Index: linux-2.6.23.16/drivers/mmc/host/Makefile
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mmc/host/Makefile 2008-03-21 17:28:26.000000000 +0100
++++ linux-2.6.23.16/drivers/mmc/host/Makefile 2008-03-21 17:30:25.000000000 +0100
+@@ -15,4 +15,5 @@ obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
+ obj-$(CONFIG_MMC_OMAP) += omap.o
+ obj-$(CONFIG_MMC_AT91) += at91_mci.o
+ obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
++obj-$(CONFIG_MMC_SPI) += mmc_spi.o
+
+Index: linux-2.6.23.16/drivers/mmc/host/mmc_spi.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/mmc/host/mmc_spi.c 2008-03-21 17:30:25.000000000 +0100
+@@ -0,0 +1,1419 @@
++/*
++ * mmc_spi.c - Access SD/MMC cards through SPI master controllers
++ *
++ * (C) Copyright 2005, Intec Automation,
++ * Mike Lavender (mike@steroidmicros)
++ * (C) Copyright 2006-2007, David Brownell
++ * (C) Copyright 2007, Axis Communications,
++ * Hans-Peter Nilsson (hp@axis.com)
++ * (C) Copyright 2007, ATRON electronic GmbH,
++ * Jan Nikitenko <jan.nikitenko@gmail.com>
++ *
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++#include <linux/hrtimer.h>
++#include <linux/delay.h>
++#include <linux/bio.h>
++#include <linux/dma-mapping.h>
++#include <linux/crc7.h>
++#include <linux/crc-itu-t.h>
++#include <linux/scatterlist.h>
++
++#include <linux/mmc/host.h>
++#include <linux/mmc/mmc.h> /* for R1_SPI_* bit values */
++
++#include <linux/spi/spi.h>
++#include <linux/spi/mmc_spi.h>
++
++#include <asm/unaligned.h>
++
++
++#define sg_page(sg) (sg)->page
++
++
++/* NOTES:
++ *
++ * - For now, we won't try to interoperate with a real mmc/sd/sdio
++ * controller, although some of them do have hardware support for
++ * SPI protocol. The main reason for such configs would be mmc-ish
++ * cards like DataFlash, which don't support that "native" protocol.
++ *
++ * We don't have a "DataFlash/MMC/SD/SDIO card slot" abstraction to
++ * switch between driver stacks, and in any case if "native" mode
++ * is available, it will be faster and hence preferable.
++ *
++ * - MMC depends on a different chipselect management policy than the
++ * SPI interface currently supports for shared bus segments: it needs
++ * to issue multiple spi_message requests with the chipselect active,
++ * using the results of one message to decide the next one to issue.
++ *
++ * Pending updates to the programming interface, this driver expects
++ * that it not share the bus with other drivers (precluding conflicts).
++ *
++ * - We tell the controller to keep the chipselect active from the
++ * beginning of an mmc_host_ops.request until the end. So beware
++ * of SPI controller drivers that mis-handle the cs_change flag!
++ *
++ * However, many cards seem OK with chipselect flapping up/down
++ * during that time ... at least on unshared bus segments.
++ */
++
++
++/*
++ * Local protocol constants, internal to data block protocols.
++ */
++
++/* Response tokens used to ack each block written: */
++#define SPI_MMC_RESPONSE_CODE(x) ((x) & 0x1f)
++#define SPI_RESPONSE_ACCEPTED ((2 << 1)|1)
++#define SPI_RESPONSE_CRC_ERR ((5 << 1)|1)
++#define SPI_RESPONSE_WRITE_ERR ((6 << 1)|1)
++
++/* Read and write blocks start with these tokens and end with crc;
++ * on error, read tokens act like a subset of R2_SPI_* values.
++ */
++#define SPI_TOKEN_SINGLE 0xfe /* single block r/w, multiblock read */
++#define SPI_TOKEN_MULTI_WRITE 0xfc /* multiblock write */
++#define SPI_TOKEN_STOP_TRAN 0xfd /* terminate multiblock write */
++
++#define MMC_SPI_BLOCKSIZE 512
++
++
++/* These fixed timeouts come from the latest SD specs, which say to ignore
++ * the CSD values. The R1B value is for card erase (e.g. the "I forgot the
++ * card's password" scenario); it's mostly applied to STOP_TRANSMISSION after
++ * reads which takes nowhere near that long. Older cards may be able to use
++ * shorter timeouts ... but why bother?
++ */
++#define readblock_timeout ktime_set(0, 100 * 1000 * 1000)
++#define writeblock_timeout ktime_set(0, 250 * 1000 * 1000)
++#define r1b_timeout ktime_set(3, 0)
++
++
++/****************************************************************************/
++
++/*
++ * Local Data Structures
++ */
++
++/* "scratch" is per-{command,block} data exchanged with the card */
++struct scratch {
++ u8 status[29];
++ u8 data_token;
++ __be16 crc_val;
++};
++
++struct mmc_spi_host {
++ struct mmc_host *mmc;
++ struct spi_device *spi;
++
++ unsigned char power_mode;
++ u16 powerup_msecs;
++
++ struct mmc_spi_platform_data *pdata;
++
++ /* for bulk data transfers */
++ struct spi_transfer token, t, crc, early_status;
++ struct spi_message m;
++
++ /* for status readback */
++ struct spi_transfer status;
++ struct spi_message readback;
++
++ /* underlying DMA-aware controller, or null */
++ struct device *dma_dev;
++
++ /* buffer used for commands and for message "overhead" */
++ struct scratch *data;
++ dma_addr_t data_dma;
++
++ /* Specs say to write ones most of the time, even when the card
++ * has no need to read its input data; and many cards won't care.
++ * This is our source of those ones.
++ */
++ void *ones;
++ dma_addr_t ones_dma;
++};
++
++
++/****************************************************************************/
++
++/*
++ * MMC-over-SPI protocol glue, used by the MMC stack interface
++ */
++
++static inline int mmc_cs_off(struct mmc_spi_host *host)
++{
++ /* chipselect will always be inactive after setup() */
++ return spi_setup(host->spi);
++}
++
++static int
++mmc_spi_readbytes(struct mmc_spi_host *host, unsigned len)
++{
++ int status;
++
++ if (len > sizeof(*host->data)) {
++ WARN_ON(1);
++ return -EIO;
++ }
++
++ host->status.len = len;
++
++ if (host->dma_dev)
++ dma_sync_single_for_device(host->dma_dev,
++ host->data_dma, sizeof(*host->data),
++ DMA_FROM_DEVICE);
++
++ status = spi_sync(host->spi, &host->readback);
++
++ if (host->dma_dev)
++ dma_sync_single_for_cpu(host->dma_dev,
++ host->data_dma, sizeof(*host->data),
++ DMA_FROM_DEVICE);
++
++ return status;
++}
++
++static int
++mmc_spi_skip(struct mmc_spi_host *host, ktime_t timeout, unsigned n, u8 byte)
++{
++ u8 *cp = host->data->status;
++
++ timeout = ktime_add(timeout, ktime_get());
++
++ while (1) {
++ int status;
++ unsigned i;
++
++ status = mmc_spi_readbytes(host, n);
++ if (status < 0)
++ return status;
++
++ for (i = 0; i < n; i++) {
++ if (cp[i] != byte)
++ return cp[i];
++ }
++
++ /* REVISIT investigate msleep() to avoid busy-wait I/O
++ * in at least some cases.
++ */
++ if (ktime_to_ns(ktime_sub(ktime_get(), timeout)) > 0)
++ break;
++ }
++ return -ETIMEDOUT;
++}
++
++static inline int
++mmc_spi_wait_unbusy(struct mmc_spi_host *host, ktime_t timeout)
++{
++ return mmc_spi_skip(host, timeout, sizeof(host->data->status), 0);
++}
++
++static int mmc_spi_readtoken(struct mmc_spi_host *host)
++{
++ return mmc_spi_skip(host, readblock_timeout, 1, 0xff);
++}
++
++
++/*
++ * Note that for SPI, cmd->resp[0] is not the same data as "native" protocol
++ * hosts return! The low byte holds R1_SPI bits. The next byte may hold
++ * R2_SPI bits ... for SEND_STATUS, or after data read errors.
++ *
++ * cmd->resp[1] holds any four-byte response, for R3 (READ_OCR) and on
++ * newer cards R7 (IF_COND).
++ */
++
++static char *maptype(struct mmc_command *cmd)
++{
++ switch (mmc_spi_resp_type(cmd)) {
++ case MMC_RSP_SPI_R1: return "R1";
++ case MMC_RSP_SPI_R1B: return "R1B";
++ case MMC_RSP_SPI_R2: return "R2/R5";
++ case MMC_RSP_SPI_R3: return "R3/R4/R7";
++ default: return "?";
++ }
++}
++
++/* return zero, else negative errno after setting cmd->error */
++static int mmc_spi_response_get(struct mmc_spi_host *host,
++ struct mmc_command *cmd, int cs_on)
++{
++ u8 *cp = host->data->status;
++ u8 *end = cp + host->t.len;
++ int value = 0;
++ char tag[32];
++
++ snprintf(tag, sizeof(tag), " ... CMD%d response SPI_%s",
++ cmd->opcode, maptype(cmd));
++
++ /* Except for data block reads, the whole response will already
++ * be stored in the scratch buffer. It's somewhere after the
++ * command and the first byte we read after it. We ignore that
++ * first byte. After STOP_TRANSMISSION command it may include
++ * two data bits, but otherwise it's all ones.
++ */
++ cp += 8;
++ while (cp < end && *cp == 0xff)
++ cp++;
++
++ /* Data block reads (R1 response types) may need more data... */
++ if (cp == end) {
++ unsigned i;
++
++ cp = host->data->status;
++
++ /* Card sends N(CR) (== 1..8) bytes of all-ones then one
++ * status byte ... and we already scanned 2 bytes.
++ *
++ * REVISIT block read paths use nasty byte-at-a-time I/O
++ * so it can always DMA directly into the target buffer.
++ * It'd probably be better to memcpy() the first chunk and
++ * avoid extra i/o calls...
++ */
++ for (i = 2; i < 9; i++) {
++ value = mmc_spi_readbytes(host, 1);
++ if (value < 0)
++ goto done;
++ if (*cp != 0xff)
++ goto checkstatus;
++ }
++ value = -ETIMEDOUT;
++ goto done;
++ }
++
++checkstatus:
++ if (*cp & 0x80) {
++ dev_dbg(&host->spi->dev, "%s: INVALID RESPONSE, %02x\n",
++ tag, *cp);
++ value = -EBADR;
++ goto done;
++ }
++
++ cmd->resp[0] = *cp++;
++ cmd->error = 0;
++
++ /* Status byte: the entire seven-bit R1 response. */
++ if (cmd->resp[0] != 0) {
++ if ((R1_SPI_PARAMETER | R1_SPI_ADDRESS
++ | R1_SPI_ILLEGAL_COMMAND)
++ & cmd->resp[0])
++ value = -EINVAL;
++ else if (R1_SPI_COM_CRC & cmd->resp[0])
++ value = -EILSEQ;
++ else if ((R1_SPI_ERASE_SEQ | R1_SPI_ERASE_RESET)
++ & cmd->resp[0])
++ value = -EIO;
++ /* else R1_SPI_IDLE, "it's resetting" */
++ }
++
++ switch (mmc_spi_resp_type(cmd)) {
++
++ /* SPI R1B == R1 + busy; STOP_TRANSMISSION (for multiblock reads)
++ * and less-common stuff like various erase operations.
++ */
++ case MMC_RSP_SPI_R1B:
++ /* maybe we read all the busy tokens already */
++ while (cp < end && *cp == 0)
++ cp++;
++ if (cp == end)
++ mmc_spi_wait_unbusy(host, r1b_timeout);
++ break;
++
++ /* SPI R2 == R1 + second status byte; SEND_STATUS
++ * SPI R5 == R1 + data byte; IO_RW_DIRECT
++ */
++ case MMC_RSP_SPI_R2:
++ cmd->resp[0] |= *cp << 8;
++ break;
++
++ /* SPI R3, R4, or R7 == R1 + 4 bytes */
++ case MMC_RSP_SPI_R3:
++ cmd->resp[1] = be32_to_cpu(get_unaligned((u32 *)cp));
++ break;
++
++ /* SPI R1 == just one status byte */
++ case MMC_RSP_SPI_R1:
++ break;
++
++ default:
++ dev_dbg(&host->spi->dev, "bad response type %04x\n",
++ mmc_spi_resp_type(cmd));
++ if (value >= 0)
++ value = -EINVAL;
++ goto done;
++ }
++
++ if (value < 0)
++ dev_dbg(&host->spi->dev, "%s: resp %04x %08x\n",
++ tag, cmd->resp[0], cmd->resp[1]);
++
++ /* disable chipselect on errors and some success cases */
++ if (value >= 0 && cs_on)
++ return value;
++done:
++ if (value < 0)
++ cmd->error = value;
++ mmc_cs_off(host);
++ return value;
++}
++
++/* Issue command and read its response.
++ * Returns zero on success, negative for error.
++ *
++ * On error, caller must cope with mmc core retry mechanism. That
++ * means immediate low-level resubmit, which affects the bus lock...
++ */
++static int
++mmc_spi_command_send(struct mmc_spi_host *host,
++ struct mmc_request *mrq,
++ struct mmc_command *cmd, int cs_on)
++{
++ struct scratch *data = host->data;
++ u8 *cp = data->status;
++ u32 arg = cmd->arg;
++ int status;
++ struct spi_transfer *t;
++
++ /* We can handle most commands (except block reads) in one full
++ * duplex I/O operation before either starting the next transfer
++ * (data block or command) or else deselecting the card.
++ *
++ * First, write 7 bytes:
++ * - an all-ones byte to ensure the card is ready
++ * - opcode byte (plus start and transmission bits)
++ * - four bytes of big-endian argument
++ * - crc7 (plus end bit) ... always computed, it's cheap
++ *
++ * We init the whole buffer to all-ones, which is what we need
++ * to write while we're reading (later) response data.
++ */
++ memset(cp++, 0xff, sizeof(data->status));
++
++ *cp++ = 0x40 | cmd->opcode;
++ *cp++ = (u8)(arg >> 24);
++ *cp++ = (u8)(arg >> 16);
++ *cp++ = (u8)(arg >> 8);
++ *cp++ = (u8)arg;
++ *cp++ = (crc7(0, &data->status[1], 5) << 1) | 0x01;
++
++ /* Then, read up to 13 bytes (while writing all-ones):
++ * - N(CR) (== 1..8) bytes of all-ones
++ * - status byte (for all response types)
++ * - the rest of the response, either:
++ * + nothing, for R1 or R1B responses
++ * + second status byte, for R2 responses
++ * + four data bytes, for R3 and R7 responses
++ *
++ * Finally, read some more bytes ... in the nice cases we know in
++ * advance how many, and reading 1 more is always OK:
++ * - N(EC) (== 0..N) bytes of all-ones, before deselect/finish
++ * - N(RC) (== 1..N) bytes of all-ones, before next command
++ * - N(WR) (== 1..N) bytes of all-ones, before data write
++ *
++ * So in those cases one full duplex I/O of at most 21 bytes will
++ * handle the whole command, leaving the card ready to receive a
++ * data block or new command. We do that whenever we can, shaving
++ * CPU and IRQ costs (especially when using DMA or FIFOs).
++ *
++ * There are two other cases, where it's not generally practical
++ * to rely on a single I/O:
++ *
++ * - R1B responses need at least N(EC) bytes of all-zeroes.
++ *
++ * In this case we can *try* to fit it into one I/O, then
++ * maybe read more data later.
++ *
++ * - Data block reads are more troublesome, since a variable
++ * number of padding bytes precede the token and data.
++ * + N(CX) (== 0..8) bytes of all-ones, before CSD or CID
++ * + N(AC) (== 1..many) bytes of all-ones
++ *
++ * In this case we currently only have minimal speedups here:
++ * when N(CR) == 1 we can avoid I/O in response_get().
++ */
++ if (cs_on && (mrq->data->flags & MMC_DATA_READ)) {
++ cp += 2; /* min(N(CR)) + status */
++ /* R1 */
++ } else {
++ cp += 10; /* max(N(CR)) + status + min(N(RC),N(WR)) */
++ if (cmd->flags & MMC_RSP_SPI_S2) /* R2/R5 */
++ cp++;
++ else if (cmd->flags & MMC_RSP_SPI_B4) /* R3/R4/R7 */
++ cp += 4;
++ else if (cmd->flags & MMC_RSP_BUSY) /* R1B */
++ cp = data->status + sizeof(data->status);
++ /* else: R1 (most commands) */
++ }
++
++ dev_dbg(&host->spi->dev, " mmc_spi: CMD%d, resp %s\n",
++ cmd->opcode, maptype(cmd));
++
++ /* send command, leaving chipselect active */
++ spi_message_init(&host->m);
++
++ t = &host->t;
++ memset(t, 0, sizeof(*t));
++ t->tx_buf = t->rx_buf = data->status;
++ t->tx_dma = t->rx_dma = host->data_dma;
++ t->len = cp - data->status;
++ t->cs_change = 1;
++ spi_message_add_tail(t, &host->m);
++
++ if (host->dma_dev) {
++ host->m.is_dma_mapped = 1;
++ dma_sync_single_for_device(host->dma_dev,
++ host->data_dma, sizeof(*host->data),
++ DMA_BIDIRECTIONAL);
++ }
++ status = spi_sync(host->spi, &host->m);
++
++ if (host->dma_dev)
++ dma_sync_single_for_cpu(host->dma_dev,
++ host->data_dma, sizeof(*host->data),
++ DMA_BIDIRECTIONAL);
++ if (status < 0) {
++ dev_dbg(&host->spi->dev, " ... write returned %d\n", status);
++ cmd->error = status;
++ return status;
++ }
++
++ /* after no-data commands and STOP_TRANSMISSION, chipselect off */
++ return mmc_spi_response_get(host, cmd, cs_on);
++}
++
++/* Build data message with up to four separate transfers. For TX, we
++ * start by writing the data token. And in most cases, we finish with
++ * a status transfer.
++ *
++ * We always provide TX data for data and CRC. The MMC/SD protocol
++ * requires us to write ones; but Linux defaults to writing zeroes;
++ * so we explicitly initialize it to all ones on RX paths.
++ *
++ * We also handle DMA mapping, so the underlying SPI controller does
++ * not need to (re)do it for each message.
++ */
++static void
++mmc_spi_setup_data_message(
++ struct mmc_spi_host *host,
++ int multiple,
++ enum dma_data_direction direction)
++{
++ struct spi_transfer *t;
++ struct scratch *scratch = host->data;
++ dma_addr_t dma = host->data_dma;
++
++ spi_message_init(&host->m);
++ if (dma)
++ host->m.is_dma_mapped = 1;
++
++ /* for reads, readblock() skips 0xff bytes before finding
++ * the token; for writes, this transfer issues that token.
++ */
++ if (direction == DMA_TO_DEVICE) {
++ t = &host->token;
++ memset(t, 0, sizeof(*t));
++ t->len = 1;
++ if (multiple)
++ scratch->data_token = SPI_TOKEN_MULTI_WRITE;
++ else
++ scratch->data_token = SPI_TOKEN_SINGLE;
++ t->tx_buf = &scratch->data_token;
++ if (dma)
++ t->tx_dma = dma + offsetof(struct scratch, data_token);
++ spi_message_add_tail(t, &host->m);
++ }
++
++ /* Body of transfer is buffer, then CRC ...
++ * either TX-only, or RX with TX-ones.
++ */
++ t = &host->t;
++ memset(t, 0, sizeof(*t));
++ t->tx_buf = host->ones;
++ t->tx_dma = host->ones_dma;
++ /* length and actual buffer info are written later */
++ spi_message_add_tail(t, &host->m);
++
++ t = &host->crc;
++ memset(t, 0, sizeof(*t));
++ t->len = 2;
++ if (direction == DMA_TO_DEVICE) {
++ /* the actual CRC may get written later */
++ t->tx_buf = &scratch->crc_val;
++ if (dma)
++ t->tx_dma = dma + offsetof(struct scratch, crc_val);
++ } else {
++ t->tx_buf = host->ones;
++ t->tx_dma = host->ones_dma;
++ t->rx_buf = &scratch->crc_val;
++ if (dma)
++ t->rx_dma = dma + offsetof(struct scratch, crc_val);
++ }
++ spi_message_add_tail(t, &host->m);
++
++ /*
++ * A single block read is followed by N(EC) [0+] all-ones bytes
++ * before deselect ... don't bother.
++ *
++ * Multiblock reads are followed by N(AC) [1+] all-ones bytes before
++ * the next block is read, or a STOP_TRANSMISSION is issued. We'll
++ * collect that single byte, so readblock() doesn't need to.
++ *
++ * For a write, the one-byte data response follows immediately, then
++ * come zero or more busy bytes, then N(WR) [1+] all-ones bytes.
++ * Then single block reads may deselect, and multiblock ones issue
++ * the next token (next data block, or STOP_TRAN). We can try to
++ * minimize I/O ops by using a single read to collect end-of-busy.
++ */
++ if (multiple || direction == DMA_TO_DEVICE) {
++ t = &host->early_status;
++ memset(t, 0, sizeof(*t));
++ t->len = (direction == DMA_TO_DEVICE)
++ ? sizeof(scratch->status)
++ : 1;
++ t->tx_buf = host->ones;
++ t->tx_dma = host->ones_dma;
++ t->rx_buf = scratch->status;
++ if (dma)
++ t->rx_dma = dma + offsetof(struct scratch, status);
++ t->cs_change = 1;
++ spi_message_add_tail(t, &host->m);
++ }
++}
++
++/*
++ * Write one block:
++ * - caller handled preceding N(WR) [1+] all-ones bytes
++ * - data block
++ * + token
++ * + data bytes
++ * + crc16
++ * - an all-ones byte ... card writes a data-response byte
++ * - followed by N(EC) [0+] all-ones bytes, card writes zero/'busy'
++ *
++ * Return negative errno, else success.
++ */
++static int
++mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t)
++{
++ struct spi_device *spi = host->spi;
++ int status, i;
++ struct scratch *scratch = host->data;
++
++ if (host->mmc->use_spi_crc)
++ scratch->crc_val = cpu_to_be16(
++ crc_itu_t(0, t->tx_buf, t->len));
++ if (host->dma_dev)
++ dma_sync_single_for_device(host->dma_dev,
++ host->data_dma, sizeof(*scratch),
++ DMA_BIDIRECTIONAL);
++
++ status = spi_sync(spi, &host->m);
++
++ if (status != 0) {
++ dev_dbg(&spi->dev, "write error (%d)\n", status);
++ return status;
++ }
++
++ if (host->dma_dev)
++ dma_sync_single_for_cpu(host->dma_dev,
++ host->data_dma, sizeof(*scratch),
++ DMA_BIDIRECTIONAL);
++
++ /*
++ * Get the transmission data-response reply. It must follow
++ * immediately after the data block we transferred. This reply
++ * doesn't necessarily tell whether the write operation succeeded;
++ * it just says if the transmission was ok and whether *earlier*
++ * writes succeeded; see the standard.
++ */
++ switch (SPI_MMC_RESPONSE_CODE(scratch->status[0])) {
++ case SPI_RESPONSE_ACCEPTED:
++ status = 0;
++ break;
++ case SPI_RESPONSE_CRC_ERR:
++ /* host shall then issue MMC_STOP_TRANSMISSION */
++ status = -EILSEQ;
++ break;
++ case SPI_RESPONSE_WRITE_ERR:
++ /* host shall then issue MMC_STOP_TRANSMISSION,
++ * and should MMC_SEND_STATUS to sort it out
++ */
++ status = -EIO;
++ break;
++ default:
++ status = -EPROTO;
++ break;
++ }
++ if (status != 0) {
++ dev_dbg(&spi->dev, "write error %02x (%d)\n",
++ scratch->status[0], status);
++ return status;
++ }
++
++ t->tx_buf += t->len;
++ if (host->dma_dev)
++ t->tx_dma += t->len;
++
++ /* Return when not busy. If we didn't collect that status yet,
++ * we'll need some more I/O.
++ */
++ for (i = 1; i < sizeof(scratch->status); i++) {
++ if (scratch->status[i] != 0)
++ return 0;
++ }
++ return mmc_spi_wait_unbusy(host, writeblock_timeout);
++}
++
++/*
++ * Read one block:
++ * - skip leading all-ones bytes ... either
++ * + N(AC) [1..f(clock,CSD)] usually, else
++ * + N(CX) [0..8] when reading CSD or CID
++ * - data block
++ * + token ... if error token, no data or crc
++ * + data bytes
++ * + crc16
++ *
++ * After single block reads, we're done; N(EC) [0+] all-ones bytes follow
++ * before dropping chipselect.
++ *
++ * For multiblock reads, caller either reads the next block or issues a
++ * STOP_TRANSMISSION command.
++ */
++static int
++mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t)
++{
++ struct spi_device *spi = host->spi;
++ int status;
++ struct scratch *scratch = host->data;
++
++ /* At least one SD card sends an all-zeroes byte when N(CX)
++ * applies, before the all-ones bytes ... just cope with that.
++ */
++ status = mmc_spi_readbytes(host, 1);
++ if (status < 0)
++ return status;
++ status = scratch->status[0];
++ if (status == 0xff || status == 0)
++ status = mmc_spi_readtoken(host);
++
++ if (status == SPI_TOKEN_SINGLE) {
++ if (host->dma_dev) {
++ dma_sync_single_for_device(host->dma_dev,
++ host->data_dma, sizeof(*scratch),
++ DMA_BIDIRECTIONAL);
++ dma_sync_single_for_device(host->dma_dev,
++ t->rx_dma, t->len,
++ DMA_FROM_DEVICE);
++ }
++
++ status = spi_sync(spi, &host->m);
++
++ if (host->dma_dev) {
++ dma_sync_single_for_cpu(host->dma_dev,
++ host->data_dma, sizeof(*scratch),
++ DMA_BIDIRECTIONAL);
++ dma_sync_single_for_cpu(host->dma_dev,
++ t->rx_dma, t->len,
++ DMA_FROM_DEVICE);
++ }
++
++ } else {
++ dev_dbg(&spi->dev, "read error %02x (%d)\n", status, status);
++
++ /* we've read extra garbage, timed out, etc */
++ if (status < 0)
++ return status;
++
++ /* low four bits are an R2 subset, fifth seems to be
++ * vendor specific ... map them all to generic error..
++ */
++ return -EIO;
++ }
++
++ if (host->mmc->use_spi_crc) {
++ u16 crc = crc_itu_t(0, t->rx_buf, t->len);
++
++ be16_to_cpus(&scratch->crc_val);
++ if (scratch->crc_val != crc) {
++ dev_dbg(&spi->dev, "read - crc error: crc_val=0x%04x, "
++ "computed=0x%04x len=%d\n",
++ scratch->crc_val, crc, t->len);
++ return -EILSEQ;
++ }
++ }
++
++ t->rx_buf += t->len;
++ if (host->dma_dev)
++ t->rx_dma += t->len;
++
++ return 0;
++}
++
++/*
++ * An MMC/SD data stage includes one or more blocks, optional CRCs,
++ * and inline handshaking. That handhaking makes it unlike most
++ * other SPI protocol stacks.
++ */
++static void
++mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd,
++ struct mmc_data *data, u32 blk_size)
++{
++ struct spi_device *spi = host->spi;
++ struct device *dma_dev = host->dma_dev;
++ struct spi_transfer *t;
++ enum dma_data_direction direction;
++ struct scatterlist *sg;
++ unsigned n_sg;
++ int multiple = (data->blocks > 1);
++
++ if (data->flags & MMC_DATA_READ)
++ direction = DMA_FROM_DEVICE;
++ else
++ direction = DMA_TO_DEVICE;
++ mmc_spi_setup_data_message(host, multiple, direction);
++ t = &host->t;
++
++ /* Handle scatterlist segments one at a time, with synch for
++ * each 512-byte block
++ */
++ for (sg = data->sg, n_sg = data->sg_len; n_sg; n_sg--, sg++) {
++ int status = 0;
++ dma_addr_t dma_addr = 0;
++ void *kmap_addr;
++ unsigned length = sg->length;
++ enum dma_data_direction dir = direction;
++
++ /* set up dma mapping for controller drivers that might
++ * use DMA ... though they may fall back to PIO
++ */
++ if (dma_dev) {
++ /* never invalidate whole *shared* pages ... */
++ if ((sg->offset != 0 || length != PAGE_SIZE)
++ && dir == DMA_FROM_DEVICE)
++ dir = DMA_BIDIRECTIONAL;
++
++ dma_addr = dma_map_page(dma_dev, sg_page(sg), 0,
++ PAGE_SIZE, dir);
++ if (direction == DMA_TO_DEVICE)
++ t->tx_dma = dma_addr + sg->offset;
++ else
++ t->rx_dma = dma_addr + sg->offset;
++ }
++
++ /* allow pio too; we don't allow highmem */
++ kmap_addr = kmap(sg_page(sg));
++ if (direction == DMA_TO_DEVICE)
++ t->tx_buf = kmap_addr + sg->offset;
++ else
++ t->rx_buf = kmap_addr + sg->offset;
++
++ /* transfer each block, and update request status */
++ while (length) {
++ t->len = min(length, blk_size);
++
++ dev_dbg(&host->spi->dev,
++ " mmc_spi: %s block, %d bytes\n",
++ (direction == DMA_TO_DEVICE)
++ ? "write"
++ : "read",
++ t->len);
++
++ if (direction == DMA_TO_DEVICE)
++ status = mmc_spi_writeblock(host, t);
++ else
++ status = mmc_spi_readblock(host, t);
++ if (status < 0)
++ break;
++
++ data->bytes_xfered += t->len;
++ length -= t->len;
++
++ if (!multiple)
++ break;
++ }
++
++ /* discard mappings */
++ if (direction == DMA_FROM_DEVICE)
++ flush_kernel_dcache_page(sg_page(sg));
++ kunmap(sg_page(sg));
++ if (dma_dev)
++ dma_unmap_page(dma_dev, dma_addr, PAGE_SIZE, dir);
++
++ if (status < 0) {
++ data->error = status;
++ dev_dbg(&spi->dev, "%s status %d\n",
++ (direction == DMA_TO_DEVICE)
++ ? "write" : "read",
++ status);
++ break;
++ }
++ }
++
++ /* NOTE some docs describe an MMC-only SET_BLOCK_COUNT (CMD23) that
++ * can be issued before multiblock writes. Unlike its more widely
++ * documented analogue for SD cards (SET_WR_BLK_ERASE_COUNT, ACMD23),
++ * that can affect the STOP_TRAN logic. Complete (and current)
++ * MMC specs should sort that out before Linux starts using CMD23.
++ */
++ if (direction == DMA_TO_DEVICE && multiple) {
++ struct scratch *scratch = host->data;
++ int tmp;
++ const unsigned statlen = sizeof(scratch->status);
++
++ dev_dbg(&spi->dev, " mmc_spi: STOP_TRAN\n");
++
++ /* Tweak the per-block message we set up earlier by morphing
++ * it to hold single buffer with the token followed by some
++ * all-ones bytes ... skip N(BR) (0..1), scan the rest for
++ * "not busy any longer" status, and leave chip selected.
++ */
++ INIT_LIST_HEAD(&host->m.transfers);
++ list_add(&host->early_status.transfer_list,
++ &host->m.transfers);
++
++ memset(scratch->status, 0xff, statlen);
++ scratch->status[0] = SPI_TOKEN_STOP_TRAN;
++
++ host->early_status.tx_buf = host->early_status.rx_buf;
++ host->early_status.tx_dma = host->early_status.rx_dma;
++ host->early_status.len = statlen;
++
++ if (host->dma_dev)
++ dma_sync_single_for_device(host->dma_dev,
++ host->data_dma, sizeof(*scratch),
++ DMA_BIDIRECTIONAL);
++
++ tmp = spi_sync(spi, &host->m);
++
++ if (host->dma_dev)
++ dma_sync_single_for_cpu(host->dma_dev,
++ host->data_dma, sizeof(*scratch),
++ DMA_BIDIRECTIONAL);
++
++ if (tmp < 0) {
++ if (!data->error)
++ data->error = tmp;
++ return;
++ }
++
++ /* Ideally we collected "not busy" status with one I/O,
++ * avoiding wasteful byte-at-a-time scanning... but more
++ * I/O is often needed.
++ */
++ for (tmp = 2; tmp < statlen; tmp++) {
++ if (scratch->status[tmp] != 0)
++ return;
++ }
++ tmp = mmc_spi_wait_unbusy(host, writeblock_timeout);
++ if (tmp < 0 && !data->error)
++ data->error = tmp;
++ }
++}
++
++/****************************************************************************/
++
++/*
++ * MMC driver implementation -- the interface to the MMC stack
++ */
++
++static void mmc_spi_request(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++ struct mmc_spi_host *host = mmc_priv(mmc);
++ int status = -EINVAL;
++
++#ifdef DEBUG
++ /* MMC core and layered drivers *MUST* issue SPI-aware commands */
++ {
++ struct mmc_command *cmd;
++ int invalid = 0;
++
++ cmd = mrq->cmd;
++ if (!mmc_spi_resp_type(cmd)) {
++ dev_dbg(&host->spi->dev, "bogus command\n");
++ cmd->error = -EINVAL;
++ invalid = 1;
++ }
++
++ cmd = mrq->stop;
++ if (cmd && !mmc_spi_resp_type(cmd)) {
++ dev_dbg(&host->spi->dev, "bogus STOP command\n");
++ cmd->error = -EINVAL;
++ invalid = 1;
++ }
++
++ if (invalid) {
++ dump_stack();
++ mmc_request_done(host->mmc, mrq);
++ return;
++ }
++ }
++#endif
++
++ /* issue command; then optionally data and stop */
++ status = mmc_spi_command_send(host, mrq, mrq->cmd, mrq->data != NULL);
++ if (status == 0 && mrq->data) {
++ mmc_spi_data_do(host, mrq->cmd, mrq->data, mrq->data->blksz);
++ if (mrq->stop)
++ status = mmc_spi_command_send(host, mrq, mrq->stop, 0);
++ else
++ mmc_cs_off(host);
++ }
++
++ mmc_request_done(host->mmc, mrq);
++}
++
++/* See Section 6.4.1, in SD "Simplified Physical Layer Specification 2.0"
++ *
++ * NOTE that here we can't know that the card has just been powered up;
++ * not all MMC/SD sockets support power switching.
++ *
++ * FIXME when the card is still in SPI mode, e.g. from a previous kernel,
++ * this doesn't seem to do the right thing at all...
++ */
++static void mmc_spi_initsequence(struct mmc_spi_host *host)
++{
++ /* Try to be very sure any previous command has completed;
++ * wait till not-busy, skip debris from any old commands.
++ */
++ mmc_spi_wait_unbusy(host, r1b_timeout);
++ mmc_spi_readbytes(host, 10);
++
++ /*
++ * Do a burst with chipselect active-high. We need to do this to
++ * meet the requirement of 74 clock cycles with both chipselect
++ * and CMD (MOSI) high before CMD0 ... after the card has been
++ * powered up to Vdd(min), and so is ready to take commands.
++ *
++ * Some cards are particularly needy of this (e.g. Viking "SD256")
++ * while most others don't seem to care.
++ *
++ * Note that this is one of the places MMC/SD plays games with the
++ * SPI protocol. Another is that when chipselect is released while
++ * the card returns BUSY status, the clock must issue several cycles
++ * with chipselect high before the card will stop driving its output.
++ */
++ host->spi->mode |= SPI_CS_HIGH;
++ if (spi_setup(host->spi) != 0) {
++ /* Just warn; most cards work without it. */
++ dev_warn(&host->spi->dev,
++ "can't change chip-select polarity\n");
++ host->spi->mode &= ~SPI_CS_HIGH;
++ } else {
++ mmc_spi_readbytes(host, 18);
++
++ host->spi->mode &= ~SPI_CS_HIGH;
++ if (spi_setup(host->spi) != 0) {
++ /* Wot, we can't get the same setup we had before? */
++ dev_err(&host->spi->dev,
++ "can't restore chip-select polarity\n");
++ }
++ }
++}
++
++static char *mmc_powerstring(u8 power_mode)
++{
++ switch (power_mode) {
++ case MMC_POWER_OFF: return "off";
++ case MMC_POWER_UP: return "up";
++ case MMC_POWER_ON: return "on";
++ }
++ return "?";
++}
++
++static void mmc_spi_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
++{
++ struct mmc_spi_host *host = mmc_priv(mmc);
++
++ if (host->power_mode != ios->power_mode) {
++ int canpower;
++
++ canpower = host->pdata && host->pdata->setpower;
++
++ dev_dbg(&host->spi->dev, "mmc_spi: power %s (%d)%s\n",
++ mmc_powerstring(ios->power_mode),
++ ios->vdd,
++ canpower ? ", can switch" : "");
++
++ /* switch power on/off if possible, accounting for
++ * max 250msec powerup time if needed.
++ */
++ if (canpower) {
++ switch (ios->power_mode) {
++ case MMC_POWER_OFF:
++ case MMC_POWER_UP:
++ host->pdata->setpower(&host->spi->dev,
++ ios->vdd);
++ if (ios->power_mode == MMC_POWER_UP)
++ msleep(host->powerup_msecs);
++ }
++ }
++
++ /* See 6.4.1 in the simplified SD card physical spec 2.0 */
++ if (ios->power_mode == MMC_POWER_ON)
++ mmc_spi_initsequence(host);
++
++ /* If powering down, ground all card inputs to avoid power
++ * delivery from data lines! On a shared SPI bus, this
++ * will probably be temporary; 6.4.2 of the simplified SD
++ * spec says this must last at least 1msec.
++ *
++ * - Clock low means CPOL 0, e.g. mode 0
++ * - MOSI low comes from writing zero
++ * - Chipselect is usually active low...
++ */
++ if (canpower && ios->power_mode == MMC_POWER_OFF) {
++ int mres;
++
++ host->spi->mode &= ~(SPI_CPOL|SPI_CPHA);
++ mres = spi_setup(host->spi);
++ if (mres < 0)
++ dev_dbg(&host->spi->dev,
++ "switch to SPI mode 0 failed\n");
++
++ if (spi_w8r8(host->spi, 0x00) < 0)
++ dev_dbg(&host->spi->dev,
++ "put spi signals to low failed\n");
++
++ /*
++ * Now clock should be low due to spi mode 0;
++ * MOSI should be low because of written 0x00;
++ * chipselect should be low (it is active low)
++ * power supply is off, so now MMC is off too!
++ *
++ * FIXME no, chipselect can be high since the
++ * device is inactive and SPI_CS_HIGH is clear...
++ */
++ msleep(10);
++ if (mres == 0) {
++ host->spi->mode |= (SPI_CPOL|SPI_CPHA);
++ mres = spi_setup(host->spi);
++ if (mres < 0)
++ dev_dbg(&host->spi->dev,
++ "switch back to SPI mode 3"
++ " failed\n");
++ }
++ }
++
++ host->power_mode = ios->power_mode;
++ }
++
++ if (host->spi->max_speed_hz != ios->clock && ios->clock != 0) {
++ int status;
++
++ host->spi->max_speed_hz = ios->clock;
++ status = spi_setup(host->spi);
++ dev_dbg(&host->spi->dev,
++ "mmc_spi: clock to %d Hz, %d\n",
++ host->spi->max_speed_hz, status);
++ }
++}
++
++static int mmc_spi_get_ro(struct mmc_host *mmc)
++{
++ struct mmc_spi_host *host = mmc_priv(mmc);
++
++ if (host->pdata && host->pdata->get_ro)
++ return host->pdata->get_ro(mmc->parent);
++ /* board doesn't support read only detection; assume writeable */
++ return 0;
++}
++
++
++static const struct mmc_host_ops mmc_spi_ops = {
++ .request = mmc_spi_request,
++ .set_ios = mmc_spi_set_ios,
++ .get_ro = mmc_spi_get_ro,
++};
++
++
++/****************************************************************************/
++
++/*
++ * SPI driver implementation
++ */
++
++static irqreturn_t
++mmc_spi_detect_irq(int irq, void *mmc)
++{
++ struct mmc_spi_host *host = mmc_priv(mmc);
++ u16 delay_msec = max(host->pdata->detect_delay, (u16)100);
++
++ mmc_detect_change(mmc, msecs_to_jiffies(delay_msec));
++ return IRQ_HANDLED;
++}
++
++struct count_children {
++ unsigned n;
++ struct bus_type *bus;
++};
++
++static int maybe_count_child(struct device *dev, void *c)
++{
++ struct count_children *ccp = c;
++
++ if (dev->bus == ccp->bus) {
++ if (ccp->n)
++ return -EBUSY;
++ ccp->n++;
++ }
++ return 0;
++}
++
++static int mmc_spi_probe(struct spi_device *spi)
++{
++ void *ones;
++ struct mmc_host *mmc;
++ struct mmc_spi_host *host;
++ int status;
++
++ /* MMC and SD specs only seem to care that sampling is on the
++ * rising edge ... meaning SPI modes 0 or 3. So either SPI mode
++ * should be legit. We'll use mode 0 since it seems to be a
++ * bit less troublesome on some hardware ... unclear why.
++ */
++ spi->mode = SPI_MODE_0;
++ spi->bits_per_word = 8;
++
++ status = spi_setup(spi);
++ if (status < 0) {
++ dev_dbg(&spi->dev, "needs SPI mode %02x, %d KHz; %d\n",
++ spi->mode, spi->max_speed_hz / 1000,
++ status);
++ return status;
++ }
++
++ /* We can use the bus safely iff nobody else will interfere with us.
++ * Most commands consist of one SPI message to issue a command, then
++ * several more to collect its response, then possibly more for data
++ * transfer. Clocking access to other devices during that period will
++ * corrupt the command execution.
++ *
++ * Until we have software primitives which guarantee non-interference,
++ * we'll aim for a hardware-level guarantee.
++ *
++ * REVISIT we can't guarantee another device won't be added later...
++ */
++ if (spi->master->num_chipselect > 1) {
++ struct count_children cc;
++
++ cc.n = 0;
++ cc.bus = spi->dev.bus;
++ status = device_for_each_child(spi->dev.parent, &cc,
++ maybe_count_child);
++ if (status < 0) {
++ dev_err(&spi->dev, "can't share SPI bus\n");
++ return status;
++ }
++
++ dev_warn(&spi->dev, "ASSUMING SPI bus stays unshared!\n");
++ }
++
++ /* We need a supply of ones to transmit. This is the only time
++ * the CPU touches these, so cache coherency isn't a concern.
++ *
++ * NOTE if many systems use more than one MMC-over-SPI connector
++ * it'd save some memory to share this. That's evidently rare.
++ */
++ status = -ENOMEM;
++ ones = kmalloc(MMC_SPI_BLOCKSIZE, GFP_KERNEL);
++ if (!ones)
++ goto nomem;
++ memset(ones, 0xff, MMC_SPI_BLOCKSIZE);
++
++ mmc = mmc_alloc_host(sizeof(*host), &spi->dev);
++ if (!mmc)
++ goto nomem;
++
++ mmc->ops = &mmc_spi_ops;
++ mmc->max_blk_size = MMC_SPI_BLOCKSIZE;
++
++ /* As long as we keep track of the number of successfully
++ * transmitted blocks, we're good for multiwrite.
++ */
++ mmc->caps = MMC_CAP_SPI | MMC_CAP_MULTIWRITE;
++
++ /* SPI doesn't need the lowspeed device identification thing for
++ * MMC or SD cards, since it never comes up in open drain mode.
++ * That's good; some SPI masters can't handle very low speeds!
++ *
++ * However, low speed SDIO cards need not handle over 400 KHz;
++ * that's the only reason not to use a few MHz for f_min (until
++ * the upper layer reads the target frequency from the CSD).
++ */
++ mmc->f_min = 400000;
++ mmc->f_max = spi->max_speed_hz;
++
++ host = mmc_priv(mmc);
++ host->mmc = mmc;
++ host->spi = spi;
++
++ host->ones = ones;
++
++ /* Platform data is used to hook up things like card sensing
++ * and power switching gpios.
++ */
++ host->pdata = spi->dev.platform_data;
++ if (host->pdata)
++ mmc->ocr_avail = host->pdata->ocr_mask;
++ if (!mmc->ocr_avail) {
++ dev_warn(&spi->dev, "ASSUMING 3.2-3.4 V slot power\n");
++ mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
++ }
++ if (host->pdata && host->pdata->setpower) {
++ host->powerup_msecs = host->pdata->powerup_msecs;
++ if (!host->powerup_msecs || host->powerup_msecs > 250)
++ host->powerup_msecs = 250;
++ }
++
++ dev_set_drvdata(&spi->dev, mmc);
++
++ /* preallocate dma buffers */
++ host->data = kmalloc(sizeof(*host->data), GFP_KERNEL);
++ if (!host->data)
++ goto fail_nobuf1;
++
++//FIXME
++#if 0
++ if (spi->master->dev.parent->dma_mask) {
++ struct device *dev = spi->master->dev.parent;
++
++ host->dma_dev = dev;
++ host->ones_dma = dma_map_single(dev, ones,
++ MMC_SPI_BLOCKSIZE, DMA_TO_DEVICE);
++ host->data_dma = dma_map_single(dev, host->data,
++ sizeof(*host->data), DMA_BIDIRECTIONAL);
++
++ /* REVISIT in theory those map operations can fail... */
++
++ dma_sync_single_for_cpu(host->dma_dev,
++ host->data_dma, sizeof(*host->data),
++ DMA_BIDIRECTIONAL);
++ }
++#endif
++
++ /* setup message for status/busy readback */
++ spi_message_init(&host->readback);
++ host->readback.is_dma_mapped = (host->dma_dev != NULL);
++
++ spi_message_add_tail(&host->status, &host->readback);
++ host->status.tx_buf = host->ones;
++ host->status.tx_dma = host->ones_dma;
++ host->status.rx_buf = &host->data->status;
++ host->status.rx_dma = host->data_dma + offsetof(struct scratch, status);
++ host->status.cs_change = 1;
++
++ /* register card detect irq */
++ if (host->pdata && host->pdata->init) {
++ status = host->pdata->init(&spi->dev, mmc_spi_detect_irq, mmc);
++ if (status != 0)
++ goto fail_glue_init;
++ }
++
++ status = mmc_add_host(mmc);
++ if (status != 0)
++ goto fail_add_host;
++
++ dev_info(&spi->dev, "SD/MMC host %s%s%s%s\n",
++ mmc->class_dev.bus_id,
++ host->dma_dev ? "" : ", no DMA",
++ (host->pdata && host->pdata->get_ro)
++ ? "" : ", no WP",
++ (host->pdata && host->pdata->setpower)
++ ? "" : ", no poweroff");
++ return 0;
++
++fail_add_host:
++ mmc_remove_host (mmc);
++fail_glue_init:
++ if (host->dma_dev)
++ dma_unmap_single(host->dma_dev, host->data_dma,
++ sizeof(*host->data), DMA_BIDIRECTIONAL);
++ kfree(host->data);
++
++fail_nobuf1:
++ mmc_free_host(mmc);
++ dev_set_drvdata(&spi->dev, NULL);
++
++nomem:
++ kfree(ones);
++ return status;
++}
++
++
++static int __devexit mmc_spi_remove(struct spi_device *spi)
++{
++ struct mmc_host *mmc = dev_get_drvdata(&spi->dev);
++ struct mmc_spi_host *host;
++
++ if (mmc) {
++ host = mmc_priv(mmc);
++
++ /* prevent new mmc_detect_change() calls */
++ if (host->pdata && host->pdata->exit)
++ host->pdata->exit(&spi->dev, mmc);
++
++ mmc_remove_host(mmc);
++
++ if (host->dma_dev) {
++ dma_unmap_single(host->dma_dev, host->ones_dma,
++ MMC_SPI_BLOCKSIZE, DMA_TO_DEVICE);
++ dma_unmap_single(host->dma_dev, host->data_dma,
++ sizeof(*host->data), DMA_BIDIRECTIONAL);
++ }
++
++ kfree(host->data);
++ kfree(host->ones);
++
++ spi->max_speed_hz = mmc->f_max;
++ mmc_free_host(mmc);
++ dev_set_drvdata(&spi->dev, NULL);
++ }
++ return 0;
++}
++
++
++static struct spi_driver mmc_spi_driver = {
++ .driver = {
++ .name = "mmc_spi",
++ .bus = &spi_bus_type,
++ .owner = THIS_MODULE,
++ },
++ .probe = mmc_spi_probe,
++ .remove = __devexit_p(mmc_spi_remove),
++};
++
++
++static int __init mmc_spi_init(void)
++{
++ return spi_register_driver(&mmc_spi_driver);
++}
++module_init(mmc_spi_init);
++
++
++static void __exit mmc_spi_exit(void)
++{
++ spi_unregister_driver(&mmc_spi_driver);
++}
++module_exit(mmc_spi_exit);
++
++
++MODULE_AUTHOR("Mike Lavender, David Brownell, "
++ "Hans-Peter Nilsson, Jan Nikitenko");
++MODULE_DESCRIPTION("SPI SD/MMC host driver");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.23.16/include/linux/spi/mmc_spi.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/linux/spi/mmc_spi.h 2008-03-21 17:30:25.000000000 +0100
+@@ -0,0 +1,33 @@
++#ifndef __LINUX_SPI_MMC_SPI_H
++#define __LINUX_SPI_MMC_SPI_H
++
++struct device;
++struct mmc_host;
++
++/* Put this in platform_data of a device being used to manage an MMC/SD
++ * card slot. (Modeled after PXA mmc glue; see that for usage examples.)
++ *
++ * REVISIT This is not a spi-specific notion. Any card slot should be
++ * able to handle it. If the MMC core doesn't adopt this kind of notion,
++ * switch the "struct device *" parameters over to "struct spi_device *".
++ */
++struct mmc_spi_platform_data {
++ /* driver activation and (optional) card detect irq hookup */
++ int (*init)(struct device *,
++ irqreturn_t (*)(int, void *),
++ void *);
++ void (*exit)(struct device *, void *);
++
++ /* sense switch on sd cards */
++ int (*get_ro)(struct device *);
++
++ /* how long to debounce card detect, in msecs */
++ u16 detect_delay;
++
++ /* power management */
++ u16 powerup_msecs; /* delay of up to 250 msec */
++ u32 ocr_mask; /* available voltages */
++ void (*setpower)(struct device *, unsigned int maskval);
++};
++
++#endif /* __LINUX_SPI_MMC_SPI_H */
+Index: linux-2.6.23.16/drivers/mmc/core/bus.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mmc/core/bus.c 2008-03-21 17:28:26.000000000 +0100
++++ linux-2.6.23.16/drivers/mmc/core/bus.c 2008-03-21 17:30:25.000000000 +0100
+@@ -19,6 +19,7 @@
+
+ #include "sysfs.h"
+ #include "core.h"
++#include "sdio_cis.h"
+ #include "bus.h"
+
+ #define dev_to_mmc_card(d) container_of(d, struct mmc_card, dev)
+@@ -34,6 +35,8 @@ static ssize_t mmc_type_show(struct devi
+ return sprintf(buf, "MMC\n");
+ case MMC_TYPE_SD:
+ return sprintf(buf, "SD\n");
++ case MMC_TYPE_SDIO:
++ return sprintf(buf, "SDIO\n");
+ default:
+ return -EFAULT;
+ }
+@@ -55,36 +58,37 @@ static int mmc_bus_match(struct device *
+ }
+
+ static int
+-mmc_bus_uevent(struct device *dev, char **envp, int num_envp, char *buf,
+- int buf_size)
++mmc_bus_uevent(struct device *dev, char **envp,
++ int num_envp, char *buffer, int buffer_size)
+ {
+ struct mmc_card *card = dev_to_mmc_card(dev);
+- int retval = 0, i = 0, length = 0;
+-
+-#define add_env(fmt,val) do { \
+- retval = add_uevent_var(envp, num_envp, &i, \
+- buf, buf_size, &length, \
+- fmt, val); \
+- if (retval) \
+- return retval; \
+-} while (0);
++ const char *type;
++ int retval = 0;
++ int i = 0, len = 0;
+
+ switch (card->type) {
+ case MMC_TYPE_MMC:
+- add_env("MMC_TYPE=%s", "MMC");
++ type = "MMC";
+ break;
+ case MMC_TYPE_SD:
+- add_env("MMC_TYPE=%s", "SD");
++ type = "SD";
+ break;
++ case MMC_TYPE_SDIO:
++ type = "SDIO";
++ break;
++ default:
++ type = NULL;
+ }
+
+- add_env("MMC_NAME=%s", mmc_card_name(card));
+-
+-#undef add_env
++ if (type) {
++ retval = add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &len, "MMC_TYPE=%s", type);
++ if (retval)
++ return retval;
++ }
+
+- envp[i] = NULL;
++ retval = add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &len, "MMC_NAME=%s", mmc_card_name(card));
+
+- return 0;
++ return retval;
+ }
+
+ static int mmc_bus_probe(struct device *dev)
+@@ -176,6 +180,11 @@ static void mmc_release_card(struct devi
+ {
+ struct mmc_card *card = dev_to_mmc_card(dev);
+
++ sdio_free_common_cis(card);
++
++ if (card->info)
++ kfree(card->info);
++
+ kfree(card);
+ }
+
+@@ -221,15 +230,25 @@ int mmc_add_card(struct mmc_card *card)
+ if (mmc_card_blockaddr(card))
+ type = "SDHC";
+ break;
++ case MMC_TYPE_SDIO:
++ type = "SDIO";
++ break;
+ default:
+ type = "?";
+ break;
+ }
+
+- printk(KERN_INFO "%s: new %s%s card at address %04x\n",
+- mmc_hostname(card->host),
+- mmc_card_highspeed(card) ? "high speed " : "",
+- type, card->rca);
++ if (mmc_host_is_spi(card->host)) {
++ printk(KERN_INFO "%s: new %s%s card on SPI\n",
++ mmc_hostname(card->host),
++ mmc_card_highspeed(card) ? "high speed " : "",
++ type);
++ } else {
++ printk(KERN_INFO "%s: new %s%s card at address %04x\n",
++ mmc_hostname(card->host),
++ mmc_card_highspeed(card) ? "high speed " : "",
++ type, card->rca);
++ }
+
+ card->dev.uevent_suppress = 1;
+
+@@ -261,8 +280,13 @@ int mmc_add_card(struct mmc_card *card)
+ void mmc_remove_card(struct mmc_card *card)
+ {
+ if (mmc_card_present(card)) {
+- printk(KERN_INFO "%s: card %04x removed\n",
+- mmc_hostname(card->host), card->rca);
++ if (mmc_host_is_spi(card->host)) {
++ printk(KERN_INFO "%s: SPI card removed\n",
++ mmc_hostname(card->host));
++ } else {
++ printk(KERN_INFO "%s: card %04x removed\n",
++ mmc_hostname(card->host), card->rca);
++ }
+
+ if (card->host->bus_ops->sysfs_remove)
+ card->host->bus_ops->sysfs_remove(card->host, card);
+Index: linux-2.6.23.16/drivers/mmc/core/core.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mmc/core/core.c 2008-03-21 17:28:26.000000000 +0100
++++ linux-2.6.23.16/drivers/mmc/core/core.c 2008-03-21 17:30:25.000000000 +0100
+@@ -18,7 +18,7 @@
+ #include <linux/delay.h>
+ #include <linux/pagemap.h>
+ #include <linux/err.h>
+-#include <asm/scatterlist.h>
++#include <linux/leds.h>
+ #include <linux/scatterlist.h>
+
+ #include <linux/mmc/card.h>
+@@ -29,16 +29,27 @@
+ #include "core.h"
+ #include "bus.h"
+ #include "host.h"
++#include "sdio_bus.h"
+
+ #include "mmc_ops.h"
+ #include "sd_ops.h"
++#include "sdio_ops.h"
+
+ extern int mmc_attach_mmc(struct mmc_host *host, u32 ocr);
+ extern int mmc_attach_sd(struct mmc_host *host, u32 ocr);
++extern int mmc_attach_sdio(struct mmc_host *host, u32 ocr);
+
+ static struct workqueue_struct *workqueue;
+
+ /*
++ * Enabling software CRCs on the data blocks can be a significant (30%)
++ * performance cost, and for other reasons may not always be desired.
++ * So we allow it it to be disabled.
++ */
++int use_spi_crc = 1;
++module_param(use_spi_crc, bool, 0);
++
++/*
+ * Internal function. Schedule delayed work in the MMC work queue.
+ */
+ static int mmc_schedule_delayed_work(struct delayed_work *work,
+@@ -68,6 +79,11 @@ void mmc_request_done(struct mmc_host *h
+ struct mmc_command *cmd = mrq->cmd;
+ int err = cmd->error;
+
++ if (err && cmd->retries && mmc_host_is_spi(host)) {
++ if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND)
++ cmd->retries = 0;
++ }
++
+ if (err && cmd->retries) {
+ pr_debug("%s: req failed (CMD%u): %d, retrying...\n",
+ mmc_hostname(host), cmd->opcode, err);
+@@ -76,6 +92,8 @@ void mmc_request_done(struct mmc_host *h
+ cmd->error = 0;
+ host->ops->request(host, mrq);
+ } else {
++ led_trigger_event(host->led, LED_OFF);
++
+ pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
+ mmc_hostname(host), cmd->opcode, err,
+ cmd->resp[0], cmd->resp[1],
+@@ -118,7 +136,7 @@ mmc_start_request(struct mmc_host *host,
+ "tsac %d ms nsac %d\n",
+ mmc_hostname(host), mrq->data->blksz,
+ mrq->data->blocks, mrq->data->flags,
+- mrq->data->timeout_ns / 10000000,
++ mrq->data->timeout_ns / 1000000,
+ mrq->data->timeout_clks);
+ }
+
+@@ -130,6 +148,8 @@ mmc_start_request(struct mmc_host *host,
+
+ WARN_ON(!host->claimed);
+
++ led_trigger_event(host->led, LED_FULL);
++
+ mrq->cmd->error = 0;
+ mrq->cmd->mrq = mrq;
+ if (mrq->data) {
+@@ -199,7 +219,7 @@ int mmc_wait_for_cmd(struct mmc_host *ho
+ {
+ struct mmc_request mrq;
+
+- BUG_ON(!host->claimed);
++ WARN_ON(!host->claimed);
+
+ memset(&mrq, 0, sizeof(struct mmc_request));
+
+@@ -220,17 +240,24 @@ EXPORT_SYMBOL(mmc_wait_for_cmd);
+ * mmc_set_data_timeout - set the timeout for a data command
+ * @data: data phase for command
+ * @card: the MMC card associated with the data transfer
+- * @write: flag to differentiate reads from writes
+ *
+ * Computes the data timeout parameters according to the
+ * correct algorithm given the card type.
+ */
+-void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card,
+- int write)
++void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
+ {
+ unsigned int mult;
+
+ /*
++ * SDIO cards only define an upper 1 s limit on access.
++ */
++ if (mmc_card_sdio(card)) {
++ data->timeout_ns = 1000000000;
++ data->timeout_clks = 0;
++ return;
++ }
++
++ /*
+ * SD cards use a 100 multiplier rather than 10
+ */
+ mult = mmc_card_sd(card) ? 100 : 10;
+@@ -239,7 +266,7 @@ void mmc_set_data_timeout(struct mmc_dat
+ * Scale up the multiplier (and therefore the timeout) by
+ * the r2w factor for writes.
+ */
+- if (write)
++ if (data->flags & MMC_DATA_WRITE)
+ mult <<= card->csd.r2w_factor;
+
+ data->timeout_ns = card->csd.tacc_ns * mult;
+@@ -255,7 +282,7 @@ void mmc_set_data_timeout(struct mmc_dat
+ timeout_us += data->timeout_clks * 1000 /
+ (card->host->ios.clock / 1000);
+
+- if (write)
++ if (data->flags & MMC_DATA_WRITE)
+ limit_us = 250000;
+ else
+ limit_us = 100000;
+@@ -272,15 +299,20 @@ void mmc_set_data_timeout(struct mmc_dat
+ EXPORT_SYMBOL(mmc_set_data_timeout);
+
+ /**
+- * mmc_claim_host - exclusively claim a host
++ * __mmc_claim_host - exclusively claim a host
+ * @host: mmc host to claim
++ * @abort: whether or not the operation should be aborted
+ *
+- * Claim a host for a set of operations.
++ * Claim a host for a set of operations. If @abort is non null and
++ * dereference a non-zero value then this will return prematurely with
++ * that non-zero value without acquiring the lock. Returns zero
++ * with the lock held otherwise.
+ */
+-void mmc_claim_host(struct mmc_host *host)
++int __mmc_claim_host(struct mmc_host *host, atomic_t *abort)
+ {
+ DECLARE_WAITQUEUE(wait, current);
+ unsigned long flags;
++ int stop;
+
+ might_sleep();
+
+@@ -288,19 +320,24 @@ void mmc_claim_host(struct mmc_host *hos
+ spin_lock_irqsave(&host->lock, flags);
+ while (1) {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+- if (!host->claimed)
++ stop = abort ? atomic_read(abort) : 0;
++ if (stop || !host->claimed)
+ break;
+ spin_unlock_irqrestore(&host->lock, flags);
+ schedule();
+ spin_lock_irqsave(&host->lock, flags);
+ }
+ set_current_state(TASK_RUNNING);
+- host->claimed = 1;
++ if (!stop)
++ host->claimed = 1;
++ else
++ wake_up(&host->wq);
+ spin_unlock_irqrestore(&host->lock, flags);
+ remove_wait_queue(&host->wq, &wait);
++ return stop;
+ }
+
+-EXPORT_SYMBOL(mmc_claim_host);
++EXPORT_SYMBOL(__mmc_claim_host);
+
+ /**
+ * mmc_release_host - release a host
+@@ -313,7 +350,7 @@ void mmc_release_host(struct mmc_host *h
+ {
+ unsigned long flags;
+
+- BUG_ON(!host->claimed);
++ WARN_ON(!host->claimed);
+
+ spin_lock_irqsave(&host->lock, flags);
+ host->claimed = 0;
+@@ -433,19 +470,32 @@ static void mmc_power_up(struct mmc_host
+ int bit = fls(host->ocr_avail) - 1;
+
+ host->ios.vdd = bit;
+- host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
+- host->ios.chip_select = MMC_CS_DONTCARE;
++ if (mmc_host_is_spi(host)) {
++ host->ios.chip_select = MMC_CS_HIGH;
++ host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
++ } else {
++ host->ios.chip_select = MMC_CS_DONTCARE;
++ host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
++ }
+ host->ios.power_mode = MMC_POWER_UP;
+ host->ios.bus_width = MMC_BUS_WIDTH_1;
+ host->ios.timing = MMC_TIMING_LEGACY;
+ mmc_set_ios(host);
+
+- mmc_delay(1);
++ /*
++ * This delay should be sufficient to allow the power supply
++ * to reach the minimum voltage.
++ */
++ mmc_delay(2);
+
+ host->ios.clock = host->f_min;
+ host->ios.power_mode = MMC_POWER_ON;
+ mmc_set_ios(host);
+
++ /*
++ * This delay must be at least 74 clock sizes, or 1 ms, or the
++ * time required to reach a stable voltage.
++ */
+ mmc_delay(2);
+ }
+
+@@ -453,8 +503,10 @@ static void mmc_power_off(struct mmc_hos
+ {
+ host->ios.clock = 0;
+ host->ios.vdd = 0;
+- host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
+- host->ios.chip_select = MMC_CS_DONTCARE;
++ if (!mmc_host_is_spi(host)) {
++ host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
++ host->ios.chip_select = MMC_CS_DONTCARE;
++ }
+ host->ios.power_mode = MMC_POWER_OFF;
+ host->ios.bus_width = MMC_BUS_WIDTH_1;
+ host->ios.timing = MMC_TIMING_LEGACY;
+@@ -511,7 +563,7 @@ void mmc_attach_bus(struct mmc_host *hos
+ BUG_ON(!host);
+ BUG_ON(!ops);
+
+- BUG_ON(!host->claimed);
++ WARN_ON(!host->claimed);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+@@ -535,8 +587,8 @@ void mmc_detach_bus(struct mmc_host *hos
+
+ BUG_ON(!host);
+
+- BUG_ON(!host->claimed);
+- BUG_ON(!host->bus_ops);
++ WARN_ON(!host->claimed);
++ WARN_ON(!host->bus_ops);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+@@ -564,7 +616,7 @@ void mmc_detect_change(struct mmc_host *
+ #ifdef CONFIG_MMC_DEBUG
+ unsigned long flags;
+ spin_lock_irqsave(&host->lock, flags);
+- BUG_ON(host->removed);
++ WARN_ON(host->removed);
+ spin_unlock_irqrestore(&host->lock, flags);
+ #endif
+
+@@ -597,24 +649,38 @@ void mmc_rescan(struct work_struct *work
+
+ mmc_send_if_cond(host, host->ocr_avail);
+
++ /*
++ * First we search for SDIO...
++ */
++ err = mmc_send_io_op_cond(host, 0, &ocr);
++ if (!err) {
++ if (mmc_attach_sdio(host, ocr))
++ mmc_power_off(host);
++ return;
++ }
++
++ /*
++ * ...then normal SD...
++ */
+ err = mmc_send_app_op_cond(host, 0, &ocr);
+- if (err == MMC_ERR_NONE) {
++ if (!err) {
+ if (mmc_attach_sd(host, ocr))
+ mmc_power_off(host);
+- } else {
+- /*
+- * If we fail to detect any SD cards then try
+- * searching for MMC cards.
+- */
+- err = mmc_send_op_cond(host, 0, &ocr);
+- if (err == MMC_ERR_NONE) {
+- if (mmc_attach_mmc(host, ocr))
+- mmc_power_off(host);
+- } else {
++ return;
++ }
++
++ /*
++ * ...and finally MMC.
++ */
++ err = mmc_send_op_cond(host, 0, &ocr);
++ if (!err) {
++ if (mmc_attach_mmc(host, ocr))
+ mmc_power_off(host);
+- mmc_release_host(host);
+- }
++ return;
+ }
++
++ mmc_release_host(host);
++ mmc_power_off(host);
+ } else {
+ if (host->bus_ops->detect && !host->bus_dead)
+ host->bus_ops->detect(host);
+@@ -725,22 +791,38 @@ static int __init mmc_init(void)
+ return -ENOMEM;
+
+ ret = mmc_register_bus();
+- if (ret == 0) {
+- ret = mmc_register_host_class();
+- if (ret)
+- mmc_unregister_bus();
+- }
++ if (ret)
++ goto destroy_workqueue;
++
++ ret = mmc_register_host_class();
++ if (ret)
++ goto unregister_bus;
++
++ ret = sdio_register_bus();
++ if (ret)
++ goto unregister_host_class;
++
++ return 0;
++
++unregister_host_class:
++ mmc_unregister_host_class();
++unregister_bus:
++ mmc_unregister_bus();
++destroy_workqueue:
++ destroy_workqueue(workqueue);
++
+ return ret;
+ }
+
+ static void __exit mmc_exit(void)
+ {
++ sdio_unregister_bus();
+ mmc_unregister_host_class();
+ mmc_unregister_bus();
+ destroy_workqueue(workqueue);
+ }
+
+-module_init(mmc_init);
++subsys_initcall(mmc_init);
+ module_exit(mmc_exit);
+
+ MODULE_LICENSE("GPL");
+Index: linux-2.6.23.16/drivers/mmc/core/core.h
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mmc/core/core.h 2008-03-21 17:28:26.000000000 +0100
++++ linux-2.6.23.16/drivers/mmc/core/core.h 2008-03-21 17:30:25.000000000 +0100
+@@ -48,5 +48,7 @@ void mmc_rescan(struct work_struct *work
+ void mmc_start_host(struct mmc_host *host);
+ void mmc_stop_host(struct mmc_host *host);
+
++extern int use_spi_crc;
++
+ #endif
+
+Index: linux-2.6.23.16/drivers/mmc/core/host.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mmc/core/host.c 2008-03-21 17:28:26.000000000 +0100
++++ linux-2.6.23.16/drivers/mmc/core/host.c 2008-03-21 17:30:25.000000000 +0100
+@@ -15,6 +15,7 @@
+ #include <linux/err.h>
+ #include <linux/idr.h>
+ #include <linux/pagemap.h>
++#include <linux/leds.h>
+
+ #include <linux/mmc/host.h>
+
+@@ -100,6 +101,9 @@ int mmc_add_host(struct mmc_host *host)
+ {
+ int err;
+
++ WARN_ON((host->caps & MMC_CAP_SDIO_IRQ) &&
++ !host->ops->enable_sdio_irq);
++
+ if (!idr_pre_get(&mmc_host_idr, GFP_KERNEL))
+ return -ENOMEM;
+
+@@ -112,6 +116,8 @@ int mmc_add_host(struct mmc_host *host)
+ snprintf(host->class_dev.bus_id, BUS_ID_SIZE,
+ "mmc%d", host->index);
+
++ led_trigger_register_simple(host->class_dev.bus_id, &host->led);
++
+ err = device_add(&host->class_dev);
+ if (err)
+ return err;
+@@ -137,6 +143,8 @@ void mmc_remove_host(struct mmc_host *ho
+
+ device_del(&host->class_dev);
+
++ led_trigger_unregister_simple(host->led);
++
+ spin_lock(&mmc_host_lock);
+ idr_remove(&mmc_host_idr, host->index);
+ spin_unlock(&mmc_host_lock);
+Index: linux-2.6.23.16/drivers/mmc/core/mmc.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mmc/core/mmc.c 2008-03-21 17:28:26.000000000 +0100
++++ linux-2.6.23.16/drivers/mmc/core/mmc.c 2008-03-21 17:30:25.000000000 +0100
+@@ -161,13 +161,12 @@ static int mmc_read_ext_csd(struct mmc_c
+ {
+ int err;
+ u8 *ext_csd;
++ unsigned int ext_csd_struct;
+
+ BUG_ON(!card);
+
+- err = MMC_ERR_FAILED;
+-
+ if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
+- return MMC_ERR_NONE;
++ return 0;
+
+ /*
+ * As the ext_csd is so large and mostly unused, we don't store the
+@@ -176,13 +175,19 @@ static int mmc_read_ext_csd(struct mmc_c
+ ext_csd = kmalloc(512, GFP_KERNEL);
+ if (!ext_csd) {
+ printk(KERN_ERR "%s: could not allocate a buffer to "
+- "receive the ext_csd. mmc v4 cards will be "
+- "treated as v3.\n", mmc_hostname(card->host));
+- return MMC_ERR_FAILED;
++ "receive the ext_csd.\n", mmc_hostname(card->host));
++ return -ENOMEM;
+ }
+
+ err = mmc_send_ext_csd(card, ext_csd);
+- if (err != MMC_ERR_NONE) {
++ if (err) {
++ /*
++ * We all hosts that cannot perform the command
++ * to fail more gracefully
++ */
++ if (err != -EINVAL)
++ goto out;
++
+ /*
+ * High capacity cards should have this "magic" size
+ * stored in their CSD.
+@@ -197,18 +202,30 @@ static int mmc_read_ext_csd(struct mmc_c
+ "EXT_CSD, performance might "
+ "suffer.\n",
+ mmc_hostname(card->host));
+- err = MMC_ERR_NONE;
++ err = 0;
+ }
++
+ goto out;
+ }
+
+- card->ext_csd.sectors =
+- ext_csd[EXT_CSD_SEC_CNT + 0] << 0 |
+- ext_csd[EXT_CSD_SEC_CNT + 1] << 8 |
+- ext_csd[EXT_CSD_SEC_CNT + 2] << 16 |
+- ext_csd[EXT_CSD_SEC_CNT + 3] << 24;
+- if (card->ext_csd.sectors)
+- mmc_card_set_blockaddr(card);
++ ext_csd_struct = ext_csd[EXT_CSD_REV];
++ if (ext_csd_struct > 2) {
++ printk(KERN_ERR "%s: unrecognised EXT_CSD structure "
++ "version %d\n", mmc_hostname(card->host),
++ ext_csd_struct);
++ err = -EINVAL;
++ goto out;
++ }
++
++ if (ext_csd_struct >= 2) {
++ card->ext_csd.sectors =
++ ext_csd[EXT_CSD_SEC_CNT + 0] << 0 |
++ ext_csd[EXT_CSD_SEC_CNT + 1] << 8 |
++ ext_csd[EXT_CSD_SEC_CNT + 2] << 16 |
++ ext_csd[EXT_CSD_SEC_CNT + 3] << 24;
++ if (card->ext_csd.sectors)
++ mmc_card_set_blockaddr(card);
++ }
+
+ switch (ext_csd[EXT_CSD_CARD_TYPE]) {
+ case EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
+@@ -246,7 +263,7 @@ static int mmc_init_card(struct mmc_host
+ unsigned int max_dtr;
+
+ BUG_ON(!host);
+- BUG_ON(!host->claimed);
++ WARN_ON(!host->claimed);
+
+ /*
+ * Since we're changing the OCR value, we seem to
+@@ -258,19 +275,33 @@ static int mmc_init_card(struct mmc_host
+
+ /* The extra bit indicates that we support high capacity */
+ err = mmc_send_op_cond(host, ocr | (1 << 30), NULL);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ goto err;
+
+ /*
++ * For SPI, enable CRC as appropriate.
++ */
++ if (mmc_host_is_spi(host)) {
++ err = mmc_spi_set_crc(host, use_spi_crc);
++ if (err)
++ goto err;
++ }
++
++ /*
+ * Fetch CID from card.
+ */
+- err = mmc_all_send_cid(host, cid);
+- if (err != MMC_ERR_NONE)
++ if (mmc_host_is_spi(host))
++ err = mmc_send_cid(host, cid);
++ else
++ err = mmc_all_send_cid(host, cid);
++ if (err)
+ goto err;
+
+ if (oldcard) {
+- if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0)
++ if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0) {
++ err = -ENOENT;
+ goto err;
++ }
+
+ card = oldcard;
+ } else {
+@@ -278,8 +309,10 @@ static int mmc_init_card(struct mmc_host
+ * Allocate card structure.
+ */
+ card = mmc_alloc_card(host);
+- if (IS_ERR(card))
++ if (IS_ERR(card)) {
++ err = PTR_ERR(card);
+ goto err;
++ }
+
+ card->type = MMC_TYPE_MMC;
+ card->rca = 1;
+@@ -287,43 +320,47 @@ static int mmc_init_card(struct mmc_host
+ }
+
+ /*
+- * Set card RCA.
++ * For native busses: set card RCA and quit open drain mode.
+ */
+- err = mmc_set_relative_addr(card);
+- if (err != MMC_ERR_NONE)
+- goto free_card;
++ if (!mmc_host_is_spi(host)) {
++ err = mmc_set_relative_addr(card);
++ if (err)
++ goto free_card;
+
+- mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
++ mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
++ }
+
+ if (!oldcard) {
+ /*
+ * Fetch CSD from card.
+ */
+ err = mmc_send_csd(card, card->raw_csd);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ goto free_card;
+
+ err = mmc_decode_csd(card);
+- if (err < 0)
++ if (err)
+ goto free_card;
+ err = mmc_decode_cid(card);
+- if (err < 0)
++ if (err)
+ goto free_card;
+ }
+
+ /*
+ * Select card, as all following commands rely on that.
+ */
+- err = mmc_select_card(card);
+- if (err != MMC_ERR_NONE)
+- goto free_card;
++ if (!mmc_host_is_spi(host)) {
++ err = mmc_select_card(card);
++ if (err)
++ goto free_card;
++ }
+
+ if (!oldcard) {
+ /*
+- * Fetch and process extened CSD.
++ * Fetch and process extended CSD.
+ */
+ err = mmc_read_ext_csd(card);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ goto free_card;
+ }
+
+@@ -334,7 +371,7 @@ static int mmc_init_card(struct mmc_host
+ (host->caps & MMC_CAP_MMC_HIGHSPEED)) {
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_HS_TIMING, 1);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ goto free_card;
+
+ mmc_card_set_highspeed(card);
+@@ -363,7 +400,7 @@ static int mmc_init_card(struct mmc_host
+ (host->caps & MMC_CAP_4_BIT_DATA)) {
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_BUS_WIDTH, EXT_CSD_BUS_WIDTH_4);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ goto free_card;
+
+ mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
+@@ -372,14 +409,14 @@ static int mmc_init_card(struct mmc_host
+ if (!oldcard)
+ host->card = card;
+
+- return MMC_ERR_NONE;
++ return 0;
+
+ free_card:
+ if (!oldcard)
+ mmc_remove_card(card);
+ err:
+
+- return MMC_ERR_FAILED;
++ return err;
+ }
+
+ /*
+@@ -413,7 +450,7 @@ static void mmc_detect(struct mmc_host *
+
+ mmc_release_host(host);
+
+- if (err != MMC_ERR_NONE) {
++ if (err) {
+ mmc_remove(host);
+
+ mmc_claim_host(host);
+@@ -480,7 +517,8 @@ static void mmc_suspend(struct mmc_host
+ BUG_ON(!host->card);
+
+ mmc_claim_host(host);
+- mmc_deselect_cards(host);
++ if (!mmc_host_is_spi(host))
++ mmc_deselect_cards(host);
+ host->card->state &= ~MMC_STATE_HIGHSPEED;
+ mmc_release_host(host);
+ }
+@@ -502,7 +540,7 @@ static void mmc_resume(struct mmc_host *
+ err = mmc_init_card(host, host->ocr, host->card);
+ mmc_release_host(host);
+
+- if (err != MMC_ERR_NONE) {
++ if (err) {
+ mmc_remove(host);
+
+ mmc_claim_host(host);
+@@ -536,11 +574,20 @@ int mmc_attach_mmc(struct mmc_host *host
+ int err;
+
+ BUG_ON(!host);
+- BUG_ON(!host->claimed);
++ WARN_ON(!host->claimed);
+
+ mmc_attach_bus(host, &mmc_ops);
+
+ /*
++ * We need to get OCR a different way for SPI.
++ */
++ if (mmc_host_is_spi(host)) {
++ err = mmc_spi_read_ocr(host, 1, &ocr);
++ if (err)
++ goto err;
++ }
++
++ /*
+ * Sanity check the voltages that the card claims to
+ * support.
+ */
+@@ -565,7 +612,7 @@ int mmc_attach_mmc(struct mmc_host *host
+ * Detect and init the card.
+ */
+ err = mmc_init_card(host, host->ocr, NULL);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ goto err;
+
+ mmc_release_host(host);
+@@ -587,6 +634,6 @@ err:
+ printk(KERN_ERR "%s: error %d whilst initialising MMC card\n",
+ mmc_hostname(host), err);
+
+- return 0;
++ return err;
+ }
+
+Index: linux-2.6.23.16/drivers/mmc/core/mmc_ops.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mmc/core/mmc_ops.c 2008-03-21 17:28:26.000000000 +0100
++++ linux-2.6.23.16/drivers/mmc/core/mmc_ops.c 2008-03-21 17:30:25.000000000 +0100
+@@ -10,7 +10,6 @@
+ */
+
+ #include <linux/types.h>
+-#include <asm/scatterlist.h>
+ #include <linux/scatterlist.h>
+
+ #include <linux/mmc/host.h>
+@@ -40,10 +39,10 @@ static int _mmc_select_card(struct mmc_h
+ }
+
+ err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ return err;
+
+- return MMC_ERR_NONE;
++ return 0;
+ }
+
+ int mmc_select_card(struct mmc_card *card)
+@@ -63,23 +62,36 @@ int mmc_go_idle(struct mmc_host *host)
+ int err;
+ struct mmc_command cmd;
+
+- mmc_set_chip_select(host, MMC_CS_HIGH);
+-
+- mmc_delay(1);
++ /*
++ * Non-SPI hosts need to prevent chipselect going active during
++ * GO_IDLE; that would put chips into SPI mode. Remind them of
++ * that in case of hardware that won't pull up DAT3/nCS otherwise.
++ *
++ * SPI hosts ignore ios.chip_select; it's managed according to
++ * rules that must accomodate non-MMC slaves which this layer
++ * won't even know about.
++ */
++ if (!mmc_host_is_spi(host)) {
++ mmc_set_chip_select(host, MMC_CS_HIGH);
++ mmc_delay(1);
++ }
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = MMC_GO_IDLE_STATE;
+ cmd.arg = 0;
+- cmd.flags = MMC_RSP_NONE | MMC_CMD_BC;
++ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;
+
+ err = mmc_wait_for_cmd(host, &cmd, 0);
+
+ mmc_delay(1);
+
+- mmc_set_chip_select(host, MMC_CS_DONTCARE);
++ if (!mmc_host_is_spi(host)) {
++ mmc_set_chip_select(host, MMC_CS_DONTCARE);
++ mmc_delay(1);
++ }
+
+- mmc_delay(1);
++ host->use_spi_crc = 0;
+
+ return err;
+ }
+@@ -94,23 +106,33 @@ int mmc_send_op_cond(struct mmc_host *ho
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = MMC_SEND_OP_COND;
+- cmd.arg = ocr;
+- cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR;
++ cmd.arg = mmc_host_is_spi(host) ? 0 : ocr;
++ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR;
+
+ for (i = 100; i; i--) {
+ err = mmc_wait_for_cmd(host, &cmd, 0);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ break;
+
+- if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0)
++ /* if we're just probing, do a single pass */
++ if (ocr == 0)
+ break;
+
+- err = MMC_ERR_TIMEOUT;
++ /* otherwise wait until reset completes */
++ if (mmc_host_is_spi(host)) {
++ if (!(cmd.resp[0] & R1_SPI_IDLE))
++ break;
++ } else {
++ if (cmd.resp[0] & MMC_CARD_BUSY)
++ break;
++ }
++
++ err = -ETIMEDOUT;
+
+ mmc_delay(10);
+ }
+
+- if (rocr)
++ if (rocr && !mmc_host_is_spi(host))
+ *rocr = cmd.resp[0];
+
+ return err;
+@@ -131,12 +153,12 @@ int mmc_all_send_cid(struct mmc_host *ho
+ cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR;
+
+ err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ return err;
+
+ memcpy(cid, cmd.resp, sizeof(u32) * 4);
+
+- return MMC_ERR_NONE;
++ return 0;
+ }
+
+ int mmc_set_relative_addr(struct mmc_card *card)
+@@ -154,46 +176,52 @@ int mmc_set_relative_addr(struct mmc_car
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+
+ err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ return err;
+
+- return MMC_ERR_NONE;
++ return 0;
+ }
+
+-int mmc_send_csd(struct mmc_card *card, u32 *csd)
++static int
++mmc_send_cxd_native(struct mmc_host *host, u32 arg, u32 *cxd, int opcode)
+ {
+ int err;
+ struct mmc_command cmd;
+
+- BUG_ON(!card);
+- BUG_ON(!card->host);
+- BUG_ON(!csd);
++ BUG_ON(!host);
++ BUG_ON(!cxd);
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+- cmd.opcode = MMC_SEND_CSD;
+- cmd.arg = card->rca << 16;
++ cmd.opcode = opcode;
++ cmd.arg = arg;
+ cmd.flags = MMC_RSP_R2 | MMC_CMD_AC;
+
+- err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
+- if (err != MMC_ERR_NONE)
++ err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
++ if (err)
+ return err;
+
+- memcpy(csd, cmd.resp, sizeof(u32) * 4);
++ memcpy(cxd, cmd.resp, sizeof(u32) * 4);
+
+- return MMC_ERR_NONE;
++ return 0;
+ }
+
+-int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd)
++static int
++mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host,
++ u32 opcode, void *buf, unsigned len)
+ {
+ struct mmc_request mrq;
+ struct mmc_command cmd;
+ struct mmc_data data;
+ struct scatterlist sg;
++ void *data_buf;
+
+- BUG_ON(!card);
+- BUG_ON(!card->host);
+- BUG_ON(!ext_csd);
++ /* dma onto stack is unsafe/nonportable, but callers to this
++ * routine normally provide temporary on-stack buffers ...
++ */
++ data_buf = kmalloc(len, GFP_KERNEL);
++ if (data_buf == NULL)
++ return -ENOMEM;
+
+ memset(&mrq, 0, sizeof(struct mmc_request));
+ memset(&cmd, 0, sizeof(struct mmc_command));
+@@ -202,28 +230,117 @@ int mmc_send_ext_csd(struct mmc_card *ca
+ mrq.cmd = &cmd;
+ mrq.data = &data;
+
+- cmd.opcode = MMC_SEND_EXT_CSD;
++ cmd.opcode = opcode;
+ cmd.arg = 0;
+- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+
+- data.blksz = 512;
++ /* NOTE HACK: the MMC_RSP_SPI_R1 is always correct here, but we
++ * rely on callers to never use this with "native" calls for reading
++ * CSD or CID. Native versions of those commands use the R2 type,
++ * not R1 plus a data block.
++ */
++ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
++
++ data.blksz = len;
+ data.blocks = 1;
+ data.flags = MMC_DATA_READ;
+ data.sg = &sg;
+ data.sg_len = 1;
+
+- sg_init_one(&sg, ext_csd, 512);
++ sg_init_one(&sg, data_buf, len);
++
++ if (card)
++ mmc_set_data_timeout(&data, card);
+
+- mmc_set_data_timeout(&data, card, 0);
++ mmc_wait_for_req(host, &mrq);
+
+- mmc_wait_for_req(card->host, &mrq);
++ memcpy(buf, data_buf, len);
++ kfree(data_buf);
+
+- if (cmd.error != MMC_ERR_NONE)
++ if (cmd.error)
+ return cmd.error;
+- if (data.error != MMC_ERR_NONE)
++ if (data.error)
+ return data.error;
+
+- return MMC_ERR_NONE;
++ return 0;
++}
++
++int mmc_send_csd(struct mmc_card *card, u32 *csd)
++{
++ int ret, i;
++
++ if (!mmc_host_is_spi(card->host))
++ return mmc_send_cxd_native(card->host, card->rca << 16,
++ csd, MMC_SEND_CSD);
++
++ ret = mmc_send_cxd_data(card, card->host, MMC_SEND_CSD, csd, 16);
++ if (ret)
++ return ret;
++
++ for (i = 0;i < 4;i++)
++ csd[i] = be32_to_cpu(csd[i]);
++
++ return 0;
++}
++
++int mmc_send_cid(struct mmc_host *host, u32 *cid)
++{
++ int ret, i;
++
++ if (!mmc_host_is_spi(host)) {
++ if (!host->card)
++ return -EINVAL;
++ return mmc_send_cxd_native(host, host->card->rca << 16,
++ cid, MMC_SEND_CID);
++ }
++
++ ret = mmc_send_cxd_data(NULL, host, MMC_SEND_CID, cid, 16);
++ if (ret)
++ return ret;
++
++ for (i = 0;i < 4;i++)
++ cid[i] = be32_to_cpu(cid[i]);
++
++ return 0;
++}
++
++int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd)
++{
++ return mmc_send_cxd_data(card, card->host, MMC_SEND_EXT_CSD,
++ ext_csd, 512);
++}
++
++int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp)
++{
++ struct mmc_command cmd;
++ int err;
++
++ memset(&cmd, 0, sizeof(struct mmc_command));
++
++ cmd.opcode = MMC_SPI_READ_OCR;
++ cmd.arg = highcap ? (1 << 30) : 0;
++ cmd.flags = MMC_RSP_SPI_R3;
++
++ err = mmc_wait_for_cmd(host, &cmd, 0);
++
++ *ocrp = cmd.resp[1];
++ return err;
++}
++
++int mmc_spi_set_crc(struct mmc_host *host, int use_crc)
++{
++ struct mmc_command cmd;
++ int err;
++
++ memset(&cmd, 0, sizeof(struct mmc_command));
++
++ cmd.opcode = MMC_SPI_CRC_ON_OFF;
++ cmd.flags = MMC_RSP_SPI_R1;
++ cmd.arg = use_crc;
++
++ err = mmc_wait_for_cmd(host, &cmd, 0);
++ if (!err)
++ host->use_spi_crc = use_crc;
++ return err;
+ }
+
+ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value)
+@@ -241,13 +358,13 @@ int mmc_switch(struct mmc_card *card, u8
+ (index << 16) |
+ (value << 8) |
+ set;
+- cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
++ cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
+
+ err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ return err;
+
+- return MMC_ERR_NONE;
++ return 0;
+ }
+
+ int mmc_send_status(struct mmc_card *card, u32 *status)
+@@ -261,16 +378,20 @@ int mmc_send_status(struct mmc_card *car
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = MMC_SEND_STATUS;
+- cmd.arg = card->rca << 16;
+- cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
++ if (!mmc_host_is_spi(card->host))
++ cmd.arg = card->rca << 16;
++ cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
+
+ err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ return err;
+
++ /* NOTE: callers are required to understand the difference
++ * between "native" and SPI format status words!
++ */
+ if (status)
+ *status = cmd.resp[0];
+
+- return MMC_ERR_NONE;
++ return 0;
+ }
+
+Index: linux-2.6.23.16/drivers/mmc/core/mmc_ops.h
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mmc/core/mmc_ops.h 2008-03-21 17:28:26.000000000 +0100
++++ linux-2.6.23.16/drivers/mmc/core/mmc_ops.h 2008-03-21 17:30:25.000000000 +0100
+@@ -22,6 +22,9 @@ int mmc_send_csd(struct mmc_card *card,
+ int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd);
+ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value);
+ int mmc_send_status(struct mmc_card *card, u32 *status);
++int mmc_send_cid(struct mmc_host *host, u32 *cid);
++int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp);
++int mmc_spi_set_crc(struct mmc_host *host, int use_crc);
+
+ #endif
+
+Index: linux-2.6.23.16/drivers/mmc/core/sd.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mmc/core/sd.c 2008-03-21 17:28:26.000000000 +0100
++++ linux-2.6.23.16/drivers/mmc/core/sd.c 2008-03-21 17:30:25.000000000 +0100
+@@ -166,8 +166,6 @@ static int mmc_decode_scr(struct mmc_car
+ unsigned int scr_struct;
+ u32 resp[4];
+
+- BUG_ON(!mmc_card_sd(card));
+-
+ resp[3] = card->raw_scr[1];
+ resp[2] = card->raw_scr[0];
+
+@@ -193,30 +191,38 @@ static int mmc_read_switch(struct mmc_ca
+ u8 *status;
+
+ if (card->scr.sda_vsn < SCR_SPEC_VER_1)
+- return MMC_ERR_NONE;
++ return 0;
+
+ if (!(card->csd.cmdclass & CCC_SWITCH)) {
+ printk(KERN_WARNING "%s: card lacks mandatory switch "
+ "function, performance might suffer.\n",
+ mmc_hostname(card->host));
+- return MMC_ERR_NONE;
++ return 0;
+ }
+
+- err = MMC_ERR_FAILED;
++ err = -EIO;
+
+ status = kmalloc(64, GFP_KERNEL);
+ if (!status) {
+ printk(KERN_ERR "%s: could not allocate a buffer for "
+ "switch capabilities.\n", mmc_hostname(card->host));
+- return err;
++ return -ENOMEM;
+ }
+
+ err = mmc_sd_switch(card, 0, 0, 1, status);
+- if (err != MMC_ERR_NONE) {
++ if (err) {
++ /*
++ * We all hosts that cannot perform the command
++ * to fail more gracefully
++ */
++ if (err != -EINVAL)
++ goto out;
++
+ printk(KERN_WARNING "%s: problem reading switch "
+ "capabilities, performance might suffer.\n",
+ mmc_hostname(card->host));
+- err = MMC_ERR_NONE;
++ err = 0;
++
+ goto out;
+ }
+
+@@ -238,28 +244,28 @@ static int mmc_switch_hs(struct mmc_card
+ u8 *status;
+
+ if (card->scr.sda_vsn < SCR_SPEC_VER_1)
+- return MMC_ERR_NONE;
++ return 0;
+
+ if (!(card->csd.cmdclass & CCC_SWITCH))
+- return MMC_ERR_NONE;
++ return 0;
+
+ if (!(card->host->caps & MMC_CAP_SD_HIGHSPEED))
+- return MMC_ERR_NONE;
++ return 0;
+
+ if (card->sw_caps.hs_max_dtr == 0)
+- return MMC_ERR_NONE;
++ return 0;
+
+- err = MMC_ERR_FAILED;
++ err = -EIO;
+
+ status = kmalloc(64, GFP_KERNEL);
+ if (!status) {
+ printk(KERN_ERR "%s: could not allocate a buffer for "
+ "switch capabilities.\n", mmc_hostname(card->host));
+- return err;
++ return -ENOMEM;
+ }
+
+ err = mmc_sd_switch(card, 1, 0, 1, status);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ goto out;
+
+ if ((status[16] & 0xF) != 1) {
+@@ -292,7 +298,7 @@ static int mmc_sd_init_card(struct mmc_h
+ unsigned int max_dtr;
+
+ BUG_ON(!host);
+- BUG_ON(!host->claimed);
++ WARN_ON(!host->claimed);
+
+ /*
+ * Since we're changing the OCR value, we seem to
+@@ -309,23 +315,37 @@ static int mmc_sd_init_card(struct mmc_h
+ * block-addressed SDHC cards.
+ */
+ err = mmc_send_if_cond(host, ocr);
+- if (err == MMC_ERR_NONE)
++ if (!err)
+ ocr |= 1 << 30;
+
+ err = mmc_send_app_op_cond(host, ocr, NULL);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ goto err;
+
+ /*
++ * For SPI, enable CRC as appropriate.
++ */
++ if (mmc_host_is_spi(host)) {
++ err = mmc_spi_set_crc(host, use_spi_crc);
++ if (err)
++ goto err;
++ }
++
++ /*
+ * Fetch CID from card.
+ */
+- err = mmc_all_send_cid(host, cid);
+- if (err != MMC_ERR_NONE)
++ if (mmc_host_is_spi(host))
++ err = mmc_send_cid(host, cid);
++ else
++ err = mmc_all_send_cid(host, cid);
++ if (err)
+ goto err;
+
+ if (oldcard) {
+- if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0)
++ if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0) {
++ err = -ENOENT;
+ goto err;
++ }
+
+ card = oldcard;
+ } else {
+@@ -333,32 +353,36 @@ static int mmc_sd_init_card(struct mmc_h
+ * Allocate card structure.
+ */
+ card = mmc_alloc_card(host);
+- if (IS_ERR(card))
++ if (IS_ERR(card)) {
++ err = PTR_ERR(card);
+ goto err;
++ }
+
+ card->type = MMC_TYPE_SD;
+ memcpy(card->raw_cid, cid, sizeof(card->raw_cid));
+ }
+
+ /*
+- * Set card RCA.
++ * For native busses: get card RCA and quit open drain mode.
+ */
+- err = mmc_send_relative_addr(host, &card->rca);
+- if (err != MMC_ERR_NONE)
+- goto free_card;
++ if (!mmc_host_is_spi(host)) {
++ err = mmc_send_relative_addr(host, &card->rca);
++ if (err)
++ goto free_card;
+
+- mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
++ mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
++ }
+
+ if (!oldcard) {
+ /*
+ * Fetch CSD from card.
+ */
+ err = mmc_send_csd(card, card->raw_csd);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ goto free_card;
+
+ err = mmc_decode_csd(card);
+- if (err < 0)
++ if (err)
+ goto free_card;
+
+ mmc_decode_cid(card);
+@@ -367,16 +391,18 @@ static int mmc_sd_init_card(struct mmc_h
+ /*
+ * Select card, as all following commands rely on that.
+ */
+- err = mmc_select_card(card);
+- if (err != MMC_ERR_NONE)
+- goto free_card;
++ if (!mmc_host_is_spi(host)) {
++ err = mmc_select_card(card);
++ if (err)
++ goto free_card;
++ }
+
+ if (!oldcard) {
+ /*
+ * Fetch SCR from card.
+ */
+ err = mmc_app_send_scr(card, card->raw_scr);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ goto free_card;
+
+ err = mmc_decode_scr(card);
+@@ -387,7 +413,7 @@ static int mmc_sd_init_card(struct mmc_h
+ * Fetch switch information from card.
+ */
+ err = mmc_read_switch(card);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ goto free_card;
+ }
+
+@@ -395,7 +421,7 @@ static int mmc_sd_init_card(struct mmc_h
+ * Attempt to change to high-speed (if supported)
+ */
+ err = mmc_switch_hs(card);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ goto free_card;
+
+ /*
+@@ -418,7 +444,7 @@ static int mmc_sd_init_card(struct mmc_h
+ if ((host->caps & MMC_CAP_4_BIT_DATA) &&
+ (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {
+ err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ goto free_card;
+
+ mmc_set_bus_width(host, MMC_BUS_WIDTH_4);
+@@ -442,14 +468,14 @@ static int mmc_sd_init_card(struct mmc_h
+ if (!oldcard)
+ host->card = card;
+
+- return MMC_ERR_NONE;
++ return 0;
+
+ free_card:
+ if (!oldcard)
+ mmc_remove_card(card);
+ err:
+
+- return MMC_ERR_FAILED;
++ return err;
+ }
+
+ /*
+@@ -483,7 +509,7 @@ static void mmc_sd_detect(struct mmc_hos
+
+ mmc_release_host(host);
+
+- if (err != MMC_ERR_NONE) {
++ if (err) {
+ mmc_sd_remove(host);
+
+ mmc_claim_host(host);
+@@ -552,7 +578,8 @@ static void mmc_sd_suspend(struct mmc_ho
+ BUG_ON(!host->card);
+
+ mmc_claim_host(host);
+- mmc_deselect_cards(host);
++ if (!mmc_host_is_spi(host))
++ mmc_deselect_cards(host);
+ host->card->state &= ~MMC_STATE_HIGHSPEED;
+ mmc_release_host(host);
+ }
+@@ -574,7 +601,7 @@ static void mmc_sd_resume(struct mmc_hos
+ err = mmc_sd_init_card(host, host->ocr, host->card);
+ mmc_release_host(host);
+
+- if (err != MMC_ERR_NONE) {
++ if (err) {
+ mmc_sd_remove(host);
+
+ mmc_claim_host(host);
+@@ -608,11 +635,22 @@ int mmc_attach_sd(struct mmc_host *host,
+ int err;
+
+ BUG_ON(!host);
+- BUG_ON(!host->claimed);
++ WARN_ON(!host->claimed);
+
+ mmc_attach_bus(host, &mmc_sd_ops);
+
+ /*
++ * We need to get OCR a different way for SPI.
++ */
++ if (mmc_host_is_spi(host)) {
++ mmc_go_idle(host);
++
++ err = mmc_spi_read_ocr(host, 0, &ocr);
++ if (err)
++ goto err;
++ }
++
++ /*
+ * Sanity check the voltages that the card claims to
+ * support.
+ */
+@@ -644,7 +682,7 @@ int mmc_attach_sd(struct mmc_host *host,
+ * Detect and init the card.
+ */
+ err = mmc_sd_init_card(host, host->ocr, NULL);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ goto err;
+
+ mmc_release_host(host);
+@@ -666,6 +704,6 @@ err:
+ printk(KERN_ERR "%s: error %d whilst initialising SD card\n",
+ mmc_hostname(host), err);
+
+- return 0;
++ return err;
+ }
+
+Index: linux-2.6.23.16/drivers/mmc/core/sd_ops.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mmc/core/sd_ops.c 2008-03-21 17:28:26.000000000 +0100
++++ linux-2.6.23.16/drivers/mmc/core/sd_ops.c 2008-03-21 17:30:25.000000000 +0100
+@@ -10,7 +10,6 @@
+ */
+
+ #include <linux/types.h>
+-#include <asm/scatterlist.h>
+ #include <linux/scatterlist.h>
+
+ #include <linux/mmc/host.h>
+@@ -33,21 +32,21 @@ static int mmc_app_cmd(struct mmc_host *
+
+ if (card) {
+ cmd.arg = card->rca << 16;
+- cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
++ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+ } else {
+ cmd.arg = 0;
+- cmd.flags = MMC_RSP_R1 | MMC_CMD_BCR;
++ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_BCR;
+ }
+
+ err = mmc_wait_for_cmd(host, &cmd, 0);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ return err;
+
+ /* Check that card supported application commands */
+- if (!(cmd.resp[0] & R1_APP_CMD))
+- return MMC_ERR_FAILED;
++ if (!mmc_host_is_spi(host) && !(cmd.resp[0] & R1_APP_CMD))
++ return -EOPNOTSUPP;
+
+- return MMC_ERR_NONE;
++ return 0;
+ }
+
+ /**
+@@ -73,7 +72,7 @@ int mmc_wait_for_app_cmd(struct mmc_host
+ BUG_ON(!cmd);
+ BUG_ON(retries < 0);
+
+- err = MMC_ERR_INVALID;
++ err = -EIO;
+
+ /*
+ * We have to resend MMC_APP_CMD for each attempt so
+@@ -83,8 +82,14 @@ int mmc_wait_for_app_cmd(struct mmc_host
+ memset(&mrq, 0, sizeof(struct mmc_request));
+
+ err = mmc_app_cmd(host, card);
+- if (err != MMC_ERR_NONE)
++ if (err) {
++ /* no point in retrying; no APP commands allowed */
++ if (mmc_host_is_spi(host)) {
++ if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND)
++ break;
++ }
+ continue;
++ }
+
+ memset(&mrq, 0, sizeof(struct mmc_request));
+
+@@ -97,8 +102,14 @@ int mmc_wait_for_app_cmd(struct mmc_host
+ mmc_wait_for_req(host, &mrq);
+
+ err = cmd->error;
+- if (cmd->error == MMC_ERR_NONE)
++ if (!cmd->error)
+ break;
++
++ /* no point in retrying illegal APP commands */
++ if (mmc_host_is_spi(host)) {
++ if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND)
++ break;
++ }
+ }
+
+ return err;
+@@ -127,14 +138,14 @@ int mmc_app_set_bus_width(struct mmc_car
+ cmd.arg = SD_BUS_WIDTH_4;
+ break;
+ default:
+- return MMC_ERR_INVALID;
++ return -EINVAL;
+ }
+
+ err = mmc_wait_for_app_cmd(card->host, card, &cmd, MMC_CMD_RETRIES);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ return err;
+
+- return MMC_ERR_NONE;
++ return 0;
+ }
+
+ int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
+@@ -147,23 +158,36 @@ int mmc_send_app_op_cond(struct mmc_host
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = SD_APP_OP_COND;
+- cmd.arg = ocr;
+- cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR;
++ if (mmc_host_is_spi(host))
++ cmd.arg = ocr & (1 << 30); /* SPI only defines one bit */
++ else
++ cmd.arg = ocr;
++ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR;
+
+ for (i = 100; i; i--) {
+ err = mmc_wait_for_app_cmd(host, NULL, &cmd, MMC_CMD_RETRIES);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ break;
+
+- if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0)
++ /* if we're just probing, do a single pass */
++ if (ocr == 0)
+ break;
+
+- err = MMC_ERR_TIMEOUT;
++ /* otherwise wait until reset completes */
++ if (mmc_host_is_spi(host)) {
++ if (!(cmd.resp[0] & R1_SPI_IDLE))
++ break;
++ } else {
++ if (cmd.resp[0] & MMC_CARD_BUSY)
++ break;
++ }
++
++ err = -ETIMEDOUT;
+
+ mmc_delay(10);
+ }
+
+- if (rocr)
++ if (rocr && !mmc_host_is_spi(host))
+ *rocr = cmd.resp[0];
+
+ return err;
+@@ -174,6 +198,7 @@ int mmc_send_if_cond(struct mmc_host *ho
+ struct mmc_command cmd;
+ int err;
+ static const u8 test_pattern = 0xAA;
++ u8 result_pattern;
+
+ /*
+ * To support SD 2.0 cards, we must always invoke SD_SEND_IF_COND
+@@ -182,16 +207,21 @@ int mmc_send_if_cond(struct mmc_host *ho
+ */
+ cmd.opcode = SD_SEND_IF_COND;
+ cmd.arg = ((ocr & 0xFF8000) != 0) << 8 | test_pattern;
+- cmd.flags = MMC_RSP_R7 | MMC_CMD_BCR;
++ cmd.flags = MMC_RSP_SPI_R7 | MMC_RSP_R7 | MMC_CMD_BCR;
+
+ err = mmc_wait_for_cmd(host, &cmd, 0);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ return err;
+
+- if ((cmd.resp[0] & 0xFF) != test_pattern)
+- return MMC_ERR_FAILED;
++ if (mmc_host_is_spi(host))
++ result_pattern = cmd.resp[1] & 0xFF;
++ else
++ result_pattern = cmd.resp[0] & 0xFF;
++
++ if (result_pattern != test_pattern)
++ return -EIO;
+
+- return MMC_ERR_NONE;
++ return 0;
+ }
+
+ int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca)
+@@ -209,12 +239,12 @@ int mmc_send_relative_addr(struct mmc_ho
+ cmd.flags = MMC_RSP_R6 | MMC_CMD_BCR;
+
+ err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ return err;
+
+ *rca = cmd.resp[0] >> 16;
+
+- return MMC_ERR_NONE;
++ return 0;
+ }
+
+ int mmc_app_send_scr(struct mmc_card *card, u32 *scr)
+@@ -229,8 +259,10 @@ int mmc_app_send_scr(struct mmc_card *ca
+ BUG_ON(!card->host);
+ BUG_ON(!scr);
+
++ /* NOTE: caller guarantees scr is heap-allocated */
++
+ err = mmc_app_cmd(card->host, card);
+- if (err != MMC_ERR_NONE)
++ if (err)
+ return err;
+
+ memset(&mrq, 0, sizeof(struct mmc_request));
+@@ -242,7 +274,7 @@ int mmc_app_send_scr(struct mmc_card *ca
+
+ cmd.opcode = SD_APP_SEND_SCR;
+ cmd.arg = 0;
+- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
++ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ data.blksz = 8;
+ data.blocks = 1;
+@@ -252,19 +284,19 @@ int mmc_app_send_scr(struct mmc_card *ca
+
+ sg_init_one(&sg, scr, 8);
+
+- mmc_set_data_timeout(&data, card, 0);
++ mmc_set_data_timeout(&data, card);
+
+ mmc_wait_for_req(card->host, &mrq);
+
+- if (cmd.error != MMC_ERR_NONE)
++ if (cmd.error)
+ return cmd.error;
+- if (data.error != MMC_ERR_NONE)
++ if (data.error)
+ return data.error;
+
+- scr[0] = ntohl(scr[0]);
+- scr[1] = ntohl(scr[1]);
++ scr[0] = be32_to_cpu(scr[0]);
++ scr[1] = be32_to_cpu(scr[1]);
+
+- return MMC_ERR_NONE;
++ return 0;
+ }
+
+ int mmc_sd_switch(struct mmc_card *card, int mode, int group,
+@@ -278,6 +310,8 @@ int mmc_sd_switch(struct mmc_card *card,
+ BUG_ON(!card);
+ BUG_ON(!card->host);
+
++ /* NOTE: caller guarantees resp is heap-allocated */
++
+ mode = !!mode;
+ value &= 0xF;
+
+@@ -292,7 +326,7 @@ int mmc_sd_switch(struct mmc_card *card,
+ cmd.arg = mode << 31 | 0x00FFFFFF;
+ cmd.arg &= ~(0xF << (group * 4));
+ cmd.arg |= value << (group * 4);
+- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
++ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ data.blksz = 64;
+ data.blocks = 1;
+@@ -302,15 +336,15 @@ int mmc_sd_switch(struct mmc_card *card,
+
+ sg_init_one(&sg, resp, 64);
+
+- mmc_set_data_timeout(&data, card, 0);
++ mmc_set_data_timeout(&data, card);
+
+ mmc_wait_for_req(card->host, &mrq);
+
+- if (cmd.error != MMC_ERR_NONE)
++ if (cmd.error)
+ return cmd.error;
+- if (data.error != MMC_ERR_NONE)
++ if (data.error)
+ return data.error;
+
+- return MMC_ERR_NONE;
++ return 0;
+ }
+
+Index: linux-2.6.23.16/drivers/mmc/core/sdio.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/mmc/core/sdio.c 2008-03-21 17:30:25.000000000 +0100
+@@ -0,0 +1,395 @@
++/*
++ * linux/drivers/mmc/sdio.c
++ *
++ * Copyright 2006-2007 Pierre Ossman
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or (at
++ * your option) any later version.
++ */
++
++#include <linux/err.h>
++
++#include <linux/mmc/host.h>
++#include <linux/mmc/card.h>
++#include <linux/mmc/sdio.h>
++#include <linux/mmc/sdio_func.h>
++
++#include "core.h"
++#include "bus.h"
++#include "sdio_bus.h"
++#include "mmc_ops.h"
++#include "sd_ops.h"
++#include "sdio_ops.h"
++#include "sdio_cis.h"
++
++static int sdio_read_fbr(struct sdio_func *func)
++{
++ int ret;
++ unsigned char data;
++
++ ret = mmc_io_rw_direct(func->card, 0, 0,
++ SDIO_FBR_BASE(func->num) + SDIO_FBR_STD_IF, 0, &data);
++ if (ret)
++ goto out;
++
++ data &= 0x0f;
++
++ if (data == 0x0f) {
++ ret = mmc_io_rw_direct(func->card, 0, 0,
++ SDIO_FBR_BASE(func->num) + SDIO_FBR_STD_IF_EXT, 0, &data);
++ if (ret)
++ goto out;
++ }
++
++ func->class = data;
++
++out:
++ return ret;
++}
++
++static int sdio_init_func(struct mmc_card *card, unsigned int fn)
++{
++ int ret;
++ struct sdio_func *func;
++
++ BUG_ON(fn > SDIO_MAX_FUNCS);
++
++ func = sdio_alloc_func(card);
++ if (IS_ERR(func))
++ return PTR_ERR(func);
++
++ func->num = fn;
++
++ ret = sdio_read_fbr(func);
++ if (ret)
++ goto fail;
++
++ ret = sdio_read_func_cis(func);
++ if (ret)
++ goto fail;
++
++ card->sdio_func[fn - 1] = func;
++
++ return 0;
++
++fail:
++ /*
++ * It is okay to remove the function here even though we hold
++ * the host lock as we haven't registered the device yet.
++ */
++ sdio_remove_func(func);
++ return ret;
++}
++
++static int sdio_read_cccr(struct mmc_card *card)
++{
++ int ret;
++ int cccr_vsn;
++ unsigned char data;
++
++ memset(&card->cccr, 0, sizeof(struct sdio_cccr));
++
++ ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_CCCR, 0, &data);
++ if (ret)
++ goto out;
++
++ cccr_vsn = data & 0x0f;
++
++ if (cccr_vsn > SDIO_CCCR_REV_1_20) {
++ printk(KERN_ERR "%s: unrecognised CCCR structure version %d\n",
++ mmc_hostname(card->host), cccr_vsn);
++ return -EINVAL;
++ }
++
++ card->cccr.sdio_vsn = (data & 0xf0) >> 4;
++
++ ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_CAPS, 0, &data);
++ if (ret)
++ goto out;
++
++ if (data & SDIO_CCCR_CAP_SMB)
++ card->cccr.multi_block = 1;
++ if (data & SDIO_CCCR_CAP_LSC)
++ card->cccr.low_speed = 1;
++ if (data & SDIO_CCCR_CAP_4BLS)
++ card->cccr.wide_bus = 1;
++
++ if (cccr_vsn >= SDIO_CCCR_REV_1_10) {
++ ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_POWER, 0, &data);
++ if (ret)
++ goto out;
++
++ if (data & SDIO_POWER_SMPC)
++ card->cccr.high_power = 1;
++ }
++
++ if (cccr_vsn >= SDIO_CCCR_REV_1_20) {
++ ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &data);
++ if (ret)
++ goto out;
++
++ if (data & SDIO_SPEED_SHS)
++ card->cccr.high_speed = 1;
++ }
++
++out:
++ return ret;
++}
++
++static int sdio_enable_wide(struct mmc_card *card)
++{
++ int ret;
++ u8 ctrl;
++
++ if (!(card->host->caps & MMC_CAP_4_BIT_DATA))
++ return 0;
++
++ if (card->cccr.low_speed && !card->cccr.wide_bus)
++ return 0;
++
++ ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
++ if (ret)
++ return ret;
++
++ ctrl |= SDIO_BUS_WIDTH_4BIT;
++
++ ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
++ if (ret)
++ return ret;
++
++ mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
++
++ return 0;
++}
++
++/*
++ * Host is being removed. Free up the current card.
++ */
++static void mmc_sdio_remove(struct mmc_host *host)
++{
++ int i;
++
++ BUG_ON(!host);
++ BUG_ON(!host->card);
++
++ for (i = 0;i < host->card->sdio_funcs;i++) {
++ if (host->card->sdio_func[i]) {
++ sdio_remove_func(host->card->sdio_func[i]);
++ host->card->sdio_func[i] = NULL;
++ }
++ }
++
++ mmc_remove_card(host->card);
++ host->card = NULL;
++}
++
++/*
++ * Card detection callback from host.
++ */
++static void mmc_sdio_detect(struct mmc_host *host)
++{
++ int err;
++
++ BUG_ON(!host);
++ BUG_ON(!host->card);
++
++ mmc_claim_host(host);
++
++ /*
++ * Just check if our card has been removed.
++ */
++ err = mmc_select_card(host->card);
++
++ mmc_release_host(host);
++
++ if (err) {
++ mmc_sdio_remove(host);
++
++ mmc_claim_host(host);
++ mmc_detach_bus(host);
++ mmc_release_host(host);
++ }
++}
++
++
++static const struct mmc_bus_ops mmc_sdio_ops = {
++ .remove = mmc_sdio_remove,
++ .detect = mmc_sdio_detect,
++};
++
++
++/*
++ * Starting point for SDIO card init.
++ */
++int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
++{
++ int err;
++ int i, funcs;
++ struct mmc_card *card;
++
++ BUG_ON(!host);
++ WARN_ON(!host->claimed);
++
++ mmc_attach_bus(host, &mmc_sdio_ops);
++
++ /*
++ * Sanity check the voltages that the card claims to
++ * support.
++ */
++ if (ocr & 0x7F) {
++ printk(KERN_WARNING "%s: card claims to support voltages "
++ "below the defined range. These will be ignored.\n",
++ mmc_hostname(host));
++ ocr &= ~0x7F;
++ }
++
++ if (ocr & MMC_VDD_165_195) {
++ printk(KERN_WARNING "%s: SDIO card claims to support the "
++ "incompletely defined 'low voltage range'. This "
++ "will be ignored.\n", mmc_hostname(host));
++ ocr &= ~MMC_VDD_165_195;
++ }
++
++ host->ocr = mmc_select_voltage(host, ocr);
++
++ /*
++ * Can we support the voltage(s) of the card(s)?
++ */
++ if (!host->ocr) {
++ err = -EINVAL;
++ goto err;
++ }
++
++ /*
++ * Inform the card of the voltage
++ */
++ err = mmc_send_io_op_cond(host, host->ocr, &ocr);
++ if (err)
++ goto err;
++
++ /*
++ * For SPI, enable CRC as appropriate.
++ */
++ if (mmc_host_is_spi(host)) {
++ err = mmc_spi_set_crc(host, use_spi_crc);
++ if (err)
++ goto err;
++ }
++
++ /*
++ * The number of functions on the card is encoded inside
++ * the ocr.
++ */
++ funcs = (ocr & 0x70000000) >> 28;
++
++ /*
++ * Allocate card structure.
++ */
++ card = mmc_alloc_card(host);
++ if (IS_ERR(card)) {
++ err = PTR_ERR(card);
++ goto err;
++ }
++
++ card->type = MMC_TYPE_SDIO;
++ card->sdio_funcs = funcs;
++
++ host->card = card;
++
++ /*
++ * For native busses: set card RCA and quit open drain mode.
++ */
++ if (!mmc_host_is_spi(host)) {
++ err = mmc_send_relative_addr(host, &card->rca);
++ if (err)
++ goto remove;
++
++ mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
++ }
++
++ /*
++ * Select card, as all following commands rely on that.
++ */
++ if (!mmc_host_is_spi(host)) {
++ err = mmc_select_card(card);
++ if (err)
++ goto remove;
++ }
++
++ /*
++ * Read the common registers.
++ */
++ err = sdio_read_cccr(card);
++ if (err)
++ goto remove;
++
++ /*
++ * Read the common CIS tuples.
++ */
++ err = sdio_read_common_cis(card);
++ if (err)
++ goto remove;
++
++ /*
++ * No support for high-speed yet, so just set
++ * the card's maximum speed.
++ */
++ mmc_set_clock(host, card->cis.max_dtr);
++
++ /*
++ * Switch to wider bus (if supported).
++ */
++ err = sdio_enable_wide(card);
++ if (err)
++ goto remove;
++
++ /*
++ * Initialize (but don't add) all present functions.
++ */
++ for (i = 0;i < funcs;i++) {
++ err = sdio_init_func(host->card, i + 1);
++ if (err)
++ goto remove;
++ }
++
++ mmc_release_host(host);
++
++ /*
++ * First add the card to the driver model...
++ */
++ err = mmc_add_card(host->card);
++ if (err)
++ goto remove_added;
++
++ /*
++ * ...then the SDIO functions.
++ */
++ for (i = 0;i < funcs;i++) {
++ err = sdio_add_func(host->card->sdio_func[i]);
++ if (err)
++ goto remove_added;
++ }
++
++ return 0;
++
++
++remove_added:
++ /* Remove without lock if the device has been added. */
++ mmc_sdio_remove(host);
++ mmc_claim_host(host);
++remove:
++ /* And with lock if it hasn't been added. */
++ if (host->card)
++ mmc_sdio_remove(host);
++err:
++ mmc_detach_bus(host);
++ mmc_release_host(host);
++
++ printk(KERN_ERR "%s: error %d whilst initialising SDIO card\n",
++ mmc_hostname(host), err);
++
++ return err;
++}
++
+Index: linux-2.6.23.16/drivers/mmc/core/sdio_bus.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/mmc/core/sdio_bus.c 2008-03-21 17:30:25.000000000 +0100
+@@ -0,0 +1,265 @@
++/*
++ * linux/drivers/mmc/core/sdio_bus.c
++ *
++ * Copyright 2007 Pierre Ossman
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or (at
++ * your option) any later version.
++ *
++ * SDIO function driver model
++ */
++
++#include <linux/device.h>
++#include <linux/err.h>
++
++#include <linux/mmc/card.h>
++#include <linux/mmc/sdio_func.h>
++
++#include "sdio_cis.h"
++#include "sdio_bus.h"
++
++#define dev_to_sdio_func(d) container_of(d, struct sdio_func, dev)
++#define to_sdio_driver(d) container_of(d, struct sdio_driver, drv)
++
++/* show configuration fields */
++#define sdio_config_attr(field, format_string) \
++static ssize_t \
++field##_show(struct device *dev, struct device_attribute *attr, char *buf) \
++{ \
++ struct sdio_func *func; \
++ \
++ func = dev_to_sdio_func (dev); \
++ return sprintf (buf, format_string, func->field); \
++}
++
++sdio_config_attr(class, "0x%02x\n");
++sdio_config_attr(vendor, "0x%04x\n");
++sdio_config_attr(device, "0x%04x\n");
++
++static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
++{
++ struct sdio_func *func = dev_to_sdio_func (dev);
++
++ return sprintf(buf, "sdio:c%02Xv%04Xd%04X\n",
++ func->class, func->vendor, func->device);
++}
++
++static struct device_attribute sdio_dev_attrs[] = {
++ __ATTR_RO(class),
++ __ATTR_RO(vendor),
++ __ATTR_RO(device),
++ __ATTR_RO(modalias),
++ __ATTR_NULL,
++};
++
++static const struct sdio_device_id *sdio_match_one(struct sdio_func *func,
++ const struct sdio_device_id *id)
++{
++ if (id->class != (__u8)SDIO_ANY_ID && id->class != func->class)
++ return NULL;
++ if (id->vendor != (__u16)SDIO_ANY_ID && id->vendor != func->vendor)
++ return NULL;
++ if (id->device != (__u16)SDIO_ANY_ID && id->device != func->device)
++ return NULL;
++ return id;
++}
++
++static const struct sdio_device_id *sdio_match_device(struct sdio_func *func,
++ struct sdio_driver *sdrv)
++{
++ const struct sdio_device_id *ids;
++
++ ids = sdrv->id_table;
++
++ if (ids) {
++ while (ids->class || ids->vendor || ids->device) {
++ if (sdio_match_one(func, ids))
++ return ids;
++ ids++;
++ }
++ }
++
++ return NULL;
++}
++
++static int sdio_bus_match(struct device *dev, struct device_driver *drv)
++{
++ struct sdio_func *func = dev_to_sdio_func(dev);
++ struct sdio_driver *sdrv = to_sdio_driver(drv);
++
++ if (sdio_match_device(func, sdrv))
++ return 1;
++
++ return 0;
++}
++
++static int
++sdio_bus_uevent(struct device *dev, char **envp,
++ int num_envp, char *buffer, int buffer_size)
++{
++ struct sdio_func *func = dev_to_sdio_func(dev);
++ int i = 0, len = 0;
++
++ if (add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &len,
++ "SDIO_CLASS=%02X", func->class))
++ return -ENOMEM;
++
++ if (add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &len,
++ "SDIO_ID=%04X:%04X", func->vendor, func->device))
++ return -ENOMEM;
++
++ if (add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &len,
++ "MODALIAS=sdio:c%02Xv%04Xd%04X",
++ func->class, func->vendor, func->device))
++ return -ENOMEM;
++
++ return 0;
++}
++
++static int sdio_bus_probe(struct device *dev)
++{
++ struct sdio_driver *drv = to_sdio_driver(dev->driver);
++ struct sdio_func *func = dev_to_sdio_func(dev);
++ const struct sdio_device_id *id;
++ int ret;
++
++ id = sdio_match_device(func, drv);
++ if (!id)
++ return -ENODEV;
++
++ /* Set the default block size so the driver is sure it's something
++ * sensible. */
++ sdio_claim_host(func);
++ ret = sdio_set_block_size(func, 0);
++ sdio_release_host(func);
++ if (ret)
++ return ret;
++
++ return drv->probe(func, id);
++}
++
++static int sdio_bus_remove(struct device *dev)
++{
++ struct sdio_driver *drv = to_sdio_driver(dev->driver);
++ struct sdio_func *func = dev_to_sdio_func(dev);
++
++ drv->remove(func);
++
++ if (func->irq_handler) {
++ printk(KERN_WARNING "WARNING: driver %s did not remove "
++ "its interrupt handler!\n", drv->name);
++ sdio_claim_host(func);
++ sdio_release_irq(func);
++ sdio_release_host(func);
++ }
++
++ return 0;
++}
++
++static struct bus_type sdio_bus_type = {
++ .name = "sdio",
++ .dev_attrs = sdio_dev_attrs,
++ .match = sdio_bus_match,
++ .uevent = sdio_bus_uevent,
++ .probe = sdio_bus_probe,
++ .remove = sdio_bus_remove,
++};
++
++int sdio_register_bus(void)
++{
++ return bus_register(&sdio_bus_type);
++}
++
++void sdio_unregister_bus(void)
++{
++ bus_unregister(&sdio_bus_type);
++}
++
++/**
++ * sdio_register_driver - register a function driver
++ * @drv: SDIO function driver
++ */
++int sdio_register_driver(struct sdio_driver *drv)
++{
++ drv->drv.name = drv->name;
++ drv->drv.bus = &sdio_bus_type;
++ return driver_register(&drv->drv);
++}
++EXPORT_SYMBOL_GPL(sdio_register_driver);
++
++/**
++ * sdio_unregister_driver - unregister a function driver
++ * @drv: SDIO function driver
++ */
++void sdio_unregister_driver(struct sdio_driver *drv)
++{
++ drv->drv.bus = &sdio_bus_type;
++ driver_unregister(&drv->drv);
++}
++EXPORT_SYMBOL_GPL(sdio_unregister_driver);
++
++static void sdio_release_func(struct device *dev)
++{
++ struct sdio_func *func = dev_to_sdio_func(dev);
++
++ sdio_free_func_cis(func);
++
++ if (func->info)
++ kfree(func->info);
++
++ kfree(func);
++}
++
++/*
++ * Allocate and initialise a new SDIO function structure.
++ */
++struct sdio_func *sdio_alloc_func(struct mmc_card *card)
++{
++ struct sdio_func *func;
++
++ func = kzalloc(sizeof(struct sdio_func), GFP_KERNEL);
++ if (!func)
++ return ERR_PTR(-ENOMEM);
++
++ func->card = card;
++
++ device_initialize(&func->dev);
++
++ func->dev.parent = &card->dev;
++ func->dev.bus = &sdio_bus_type;
++ func->dev.release = sdio_release_func;
++
++ return func;
++}
++
++/*
++ * Register a new SDIO function with the driver model.
++ */
++int sdio_add_func(struct sdio_func *func)
++{
++ int ret;
++
++ snprintf(func->dev.bus_id, sizeof(func->dev.bus_id),
++ "%s:%d", mmc_card_id(func->card), func->num);
++
++ ret = device_add(&func->dev);
++ if (ret == 0)
++ sdio_func_set_present(func);
++
++ return ret;
++}
++
++/*
++ * Unregister a SDIO function with the driver model, and
++ * (eventually) free it.
++ */
++void sdio_remove_func(struct sdio_func *func)
++{
++ if (sdio_func_present(func))
++ device_del(&func->dev);
++
++ put_device(&func->dev);
++}
++
+Index: linux-2.6.23.16/drivers/mmc/core/sdio_bus.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/mmc/core/sdio_bus.h 2008-03-21 17:30:25.000000000 +0100
+@@ -0,0 +1,22 @@
++/*
++ * linux/drivers/mmc/core/sdio_bus.h
++ *
++ * Copyright 2007 Pierre Ossman
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or (at
++ * your option) any later version.
++ */
++#ifndef _MMC_CORE_SDIO_BUS_H
++#define _MMC_CORE_SDIO_BUS_H
++
++struct sdio_func *sdio_alloc_func(struct mmc_card *card);
++int sdio_add_func(struct sdio_func *func);
++void sdio_remove_func(struct sdio_func *func);
++
++int sdio_register_bus(void);
++void sdio_unregister_bus(void);
++
++#endif
++
+Index: linux-2.6.23.16/drivers/mmc/core/sdio_cis.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/mmc/core/sdio_cis.c 2008-03-21 17:30:25.000000000 +0100
+@@ -0,0 +1,346 @@
++/*
++ * linux/drivers/mmc/core/sdio_cis.c
++ *
++ * Author: Nicolas Pitre
++ * Created: June 11, 2007
++ * Copyright: MontaVista Software Inc.
++ *
++ * Copyright 2007 Pierre Ossman
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or (at
++ * your option) any later version.
++ */
++
++#include <linux/kernel.h>
++
++#include <linux/mmc/host.h>
++#include <linux/mmc/card.h>
++#include <linux/mmc/sdio.h>
++#include <linux/mmc/sdio_func.h>
++
++#include "sdio_cis.h"
++#include "sdio_ops.h"
++
++static int cistpl_vers_1(struct mmc_card *card, struct sdio_func *func,
++ const unsigned char *buf, unsigned size)
++{
++ unsigned i, nr_strings;
++ char **buffer, *string;
++
++ buf += 2;
++ size -= 2;
++
++ nr_strings = 0;
++ for (i = 0; i < size; i++) {
++ if (buf[i] == 0xff)
++ break;
++ if (buf[i] == 0)
++ nr_strings++;
++ }
++
++ if (buf[i-1] != '\0') {
++ printk(KERN_WARNING "SDIO: ignoring broken CISTPL_VERS_1\n");
++ return 0;
++ }
++
++ size = i;
++
++ buffer = kzalloc(sizeof(char*) * nr_strings + size, GFP_KERNEL);
++ if (!buffer)
++ return -ENOMEM;
++
++ string = (char*)(buffer + nr_strings);
++
++ for (i = 0; i < nr_strings; i++) {
++ buffer[i] = string;
++ strcpy(string, buf);
++ string += strlen(string) + 1;
++ buf += strlen(buf) + 1;
++ }
++
++ if (func) {
++ func->num_info = nr_strings;
++ func->info = (const char**)buffer;
++ } else {
++ card->num_info = nr_strings;
++ card->info = (const char**)buffer;
++ }
++
++ return 0;
++}
++
++static int cistpl_manfid(struct mmc_card *card, struct sdio_func *func,
++ const unsigned char *buf, unsigned size)
++{
++ unsigned int vendor, device;
++
++ /* TPLMID_MANF */
++ vendor = buf[0] | (buf[1] << 8);
++
++ /* TPLMID_CARD */
++ device = buf[2] | (buf[3] << 8);
++
++ if (func) {
++ func->vendor = vendor;
++ func->device = device;
++ } else {
++ card->cis.vendor = vendor;
++ card->cis.device = device;
++ }
++
++ return 0;
++}
++
++static const unsigned char speed_val[16] =
++ { 0, 10, 12, 13, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80 };
++static const unsigned int speed_unit[8] =
++ { 10000, 100000, 1000000, 10000000, 0, 0, 0, 0 };
++
++static int cistpl_funce_common(struct mmc_card *card,
++ const unsigned char *buf, unsigned size)
++{
++ if (size < 0x04 || buf[0] != 0)
++ return -EINVAL;
++
++ /* TPLFE_FN0_BLK_SIZE */
++ card->cis.blksize = buf[1] | (buf[2] << 8);
++
++ /* TPLFE_MAX_TRAN_SPEED */
++ card->cis.max_dtr = speed_val[(buf[3] >> 3) & 15] *
++ speed_unit[buf[3] & 7];
++
++ return 0;
++}
++
++static int cistpl_funce_func(struct sdio_func *func,
++ const unsigned char *buf, unsigned size)
++{
++ unsigned vsn;
++ unsigned min_size;
++
++ vsn = func->card->cccr.sdio_vsn;
++ min_size = (vsn == SDIO_SDIO_REV_1_00) ? 28 : 42;
++
++ if (size < min_size || buf[0] != 1)
++ return -EINVAL;
++
++ /* TPLFE_MAX_BLK_SIZE */
++ func->max_blksize = buf[12] | (buf[13] << 8);
++
++ return 0;
++}
++
++static int cistpl_funce(struct mmc_card *card, struct sdio_func *func,
++ const unsigned char *buf, unsigned size)
++{
++ int ret;
++
++ /*
++ * There should be two versions of the CISTPL_FUNCE tuple,
++ * one for the common CIS (function 0) and a version used by
++ * the individual function's CIS (1-7). Yet, the later has a
++ * different length depending on the SDIO spec version.
++ */
++ if (func)
++ ret = cistpl_funce_func(func, buf, size);
++ else
++ ret = cistpl_funce_common(card, buf, size);
++
++ if (ret) {
++ printk(KERN_ERR "%s: bad CISTPL_FUNCE size %u "
++ "type %u\n", mmc_hostname(card->host), size, buf[0]);
++ return ret;
++ }
++
++ return 0;
++}
++
++typedef int (tpl_parse_t)(struct mmc_card *, struct sdio_func *,
++ const unsigned char *, unsigned);
++
++struct cis_tpl {
++ unsigned char code;
++ unsigned char min_size;
++ tpl_parse_t *parse;
++};
++
++static const struct cis_tpl cis_tpl_list[] = {
++ { 0x15, 3, cistpl_vers_1 },
++ { 0x20, 4, cistpl_manfid },
++ { 0x21, 2, /* cistpl_funcid */ },
++ { 0x22, 0, cistpl_funce },
++};
++
++static int sdio_read_cis(struct mmc_card *card, struct sdio_func *func)
++{
++ int ret;
++ struct sdio_func_tuple *this, **prev;
++ unsigned i, ptr = 0;
++
++ /*
++ * Note that this works for the common CIS (function number 0) as
++ * well as a function's CIS * since SDIO_CCCR_CIS and SDIO_FBR_CIS
++ * have the same offset.
++ */
++ for (i = 0; i < 3; i++) {
++ unsigned char x, fn;
++
++ if (func)
++ fn = func->num;
++ else
++ fn = 0;
++
++ ret = mmc_io_rw_direct(card, 0, 0,
++ SDIO_FBR_BASE(fn) + SDIO_FBR_CIS + i, 0, &x);
++ if (ret)
++ return ret;
++ ptr |= x << (i * 8);
++ }
++
++ if (func)
++ prev = &func->tuples;
++ else
++ prev = &card->tuples;
++
++ BUG_ON(*prev);
++
++ do {
++ unsigned char tpl_code, tpl_link;
++
++ ret = mmc_io_rw_direct(card, 0, 0, ptr++, 0, &tpl_code);
++ if (ret)
++ break;
++
++ /* 0xff means we're done */
++ if (tpl_code == 0xff)
++ break;
++
++ ret = mmc_io_rw_direct(card, 0, 0, ptr++, 0, &tpl_link);
++ if (ret)
++ break;
++
++ this = kmalloc(sizeof(*this) + tpl_link, GFP_KERNEL);
++ if (!this)
++ return -ENOMEM;
++
++ for (i = 0; i < tpl_link; i++) {
++ ret = mmc_io_rw_direct(card, 0, 0,
++ ptr + i, 0, &this->data[i]);
++ if (ret)
++ break;
++ }
++ if (ret) {
++ kfree(this);
++ break;
++ }
++
++ for (i = 0; i < ARRAY_SIZE(cis_tpl_list); i++)
++ if (cis_tpl_list[i].code == tpl_code)
++ break;
++ if (i >= ARRAY_SIZE(cis_tpl_list)) {
++ /* this tuple is unknown to the core */
++ this->next = NULL;
++ this->code = tpl_code;
++ this->size = tpl_link;
++ *prev = this;
++ prev = &this->next;
++ printk(KERN_DEBUG
++ "%s: queuing CIS tuple 0x%02x length %u\n",
++ mmc_hostname(card->host), tpl_code, tpl_link);
++ } else {
++ const struct cis_tpl *tpl = cis_tpl_list + i;
++ if (tpl_link < tpl->min_size) {
++ printk(KERN_ERR
++ "%s: bad CIS tuple 0x%02x (length = %u, expected >= %u)\n",
++ mmc_hostname(card->host),
++ tpl_code, tpl_link, tpl->min_size);
++ ret = -EINVAL;
++ } else if (tpl->parse) {
++ ret = tpl->parse(card, func,
++ this->data, tpl_link);
++ }
++ kfree(this);
++ }
++
++ ptr += tpl_link;
++ } while (!ret);
++
++ /*
++ * Link in all unknown tuples found in the common CIS so that
++ * drivers don't have to go digging in two places.
++ */
++ if (func)
++ *prev = card->tuples;
++
++ return ret;
++}
++
++int sdio_read_common_cis(struct mmc_card *card)
++{
++ return sdio_read_cis(card, NULL);
++}
++
++void sdio_free_common_cis(struct mmc_card *card)
++{
++ struct sdio_func_tuple *tuple, *victim;
++
++ tuple = card->tuples;
++
++ while (tuple) {
++ victim = tuple;
++ tuple = tuple->next;
++ kfree(victim);
++ }
++
++ card->tuples = NULL;
++}
++
++int sdio_read_func_cis(struct sdio_func *func)
++{
++ int ret;
++
++ ret = sdio_read_cis(func->card, func);
++ if (ret)
++ return ret;
++
++ /*
++ * Since we've linked to tuples in the card structure,
++ * we must make sure we have a reference to it.
++ */
++ get_device(&func->card->dev);
++
++ /*
++ * Vendor/device id is optional for function CIS, so
++ * copy it from the card structure as needed.
++ */
++ if (func->vendor == 0) {
++ func->vendor = func->card->cis.vendor;
++ func->device = func->card->cis.device;
++ }
++
++ return 0;
++}
++
++void sdio_free_func_cis(struct sdio_func *func)
++{
++ struct sdio_func_tuple *tuple, *victim;
++
++ tuple = func->tuples;
++
++ while (tuple && tuple != func->card->tuples) {
++ victim = tuple;
++ tuple = tuple->next;
++ kfree(victim);
++ }
++
++ func->tuples = NULL;
++
++ /*
++ * We have now removed the link to the tuples in the
++ * card structure, so remove the reference.
++ */
++ put_device(&func->card->dev);
++}
++
+Index: linux-2.6.23.16/drivers/mmc/core/sdio_cis.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/mmc/core/sdio_cis.h 2008-03-21 17:30:25.000000000 +0100
+@@ -0,0 +1,23 @@
++/*
++ * linux/drivers/mmc/core/sdio_cis.h
++ *
++ * Author: Nicolas Pitre
++ * Created: June 11, 2007
++ * Copyright: MontaVista Software Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or (at
++ * your option) any later version.
++ */
++
++#ifndef _MMC_SDIO_CIS_H
++#define _MMC_SDIO_CIS_H
++
++int sdio_read_common_cis(struct mmc_card *card);
++void sdio_free_common_cis(struct mmc_card *card);
++
++int sdio_read_func_cis(struct sdio_func *func);
++void sdio_free_func_cis(struct sdio_func *func);
++
++#endif
+Index: linux-2.6.23.16/drivers/mmc/core/sdio_io.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/mmc/core/sdio_io.c 2008-03-21 17:30:25.000000000 +0100
+@@ -0,0 +1,548 @@
++/*
++ * linux/drivers/mmc/core/sdio_io.c
++ *
++ * Copyright 2007 Pierre Ossman
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or (at
++ * your option) any later version.
++ */
++
++#include <linux/mmc/host.h>
++#include <linux/mmc/card.h>
++#include <linux/mmc/sdio.h>
++#include <linux/mmc/sdio_func.h>
++
++#include "sdio_ops.h"
++
++/**
++ * sdio_claim_host - exclusively claim a bus for a certain SDIO function
++ * @func: SDIO function that will be accessed
++ *
++ * Claim a bus for a set of operations. The SDIO function given
++ * is used to figure out which bus is relevant.
++ */
++void sdio_claim_host(struct sdio_func *func)
++{
++ BUG_ON(!func);
++ BUG_ON(!func->card);
++
++ mmc_claim_host(func->card->host);
++}
++EXPORT_SYMBOL_GPL(sdio_claim_host);
++
++/**
++ * sdio_release_host - release a bus for a certain SDIO function
++ * @func: SDIO function that was accessed
++ *
++ * Release a bus, allowing others to claim the bus for their
++ * operations.
++ */
++void sdio_release_host(struct sdio_func *func)
++{
++ BUG_ON(!func);
++ BUG_ON(!func->card);
++
++ mmc_release_host(func->card->host);
++}
++EXPORT_SYMBOL_GPL(sdio_release_host);
++
++/**
++ * sdio_enable_func - enables a SDIO function for usage
++ * @func: SDIO function to enable
++ *
++ * Powers up and activates a SDIO function so that register
++ * access is possible.
++ */
++int sdio_enable_func(struct sdio_func *func)
++{
++ int ret;
++ unsigned char reg;
++ unsigned long timeout;
++
++ BUG_ON(!func);
++ BUG_ON(!func->card);
++
++ pr_debug("SDIO: Enabling device %s...\n", sdio_func_id(func));
++
++ ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IOEx, 0, ®);
++ if (ret)
++ goto err;
++
++ reg |= 1 << func->num;
++
++ ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IOEx, reg, NULL);
++ if (ret)
++ goto err;
++
++ /*
++ * FIXME: This should timeout based on information in the CIS,
++ * but we don't have card to parse that yet.
++ */
++ timeout = jiffies + HZ;
++
++ while (1) {
++ ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IORx, 0, ®);
++ if (ret)
++ goto err;
++ if (reg & (1 << func->num))
++ break;
++ ret = -ETIME;
++ if (time_after(jiffies, timeout))
++ goto err;
++ }
++
++ pr_debug("SDIO: Enabled device %s\n", sdio_func_id(func));
++
++ return 0;
++
++err:
++ pr_debug("SDIO: Failed to enable device %s\n", sdio_func_id(func));
++ return ret;
++}
++EXPORT_SYMBOL_GPL(sdio_enable_func);
++
++/**
++ * sdio_disable_func - disable a SDIO function
++ * @func: SDIO function to disable
++ *
++ * Powers down and deactivates a SDIO function. Register access
++ * to this function will fail until the function is reenabled.
++ */
++int sdio_disable_func(struct sdio_func *func)
++{
++ int ret;
++ unsigned char reg;
++
++ BUG_ON(!func);
++ BUG_ON(!func->card);
++
++ pr_debug("SDIO: Disabling device %s...\n", sdio_func_id(func));
++
++ ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IOEx, 0, ®);
++ if (ret)
++ goto err;
++
++ reg &= ~(1 << func->num);
++
++ ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IOEx, reg, NULL);
++ if (ret)
++ goto err;
++
++ pr_debug("SDIO: Disabled device %s\n", sdio_func_id(func));
++
++ return 0;
++
++err:
++ pr_debug("SDIO: Failed to disable device %s\n", sdio_func_id(func));
++ return -EIO;
++}
++EXPORT_SYMBOL_GPL(sdio_disable_func);
++
++/**
++ * sdio_set_block_size - set the block size of an SDIO function
++ * @func: SDIO function to change
++ * @blksz: new block size or 0 to use the default.
++ *
++ * The default block size is the largest supported by both the function
++ * and the host, with a maximum of 512 to ensure that arbitrarily sized
++ * data transfer use the optimal (least) number of commands.
++ *
++ * A driver may call this to override the default block size set by the
++ * core. This can be used to set a block size greater than the maximum
++ * that reported by the card; it is the driver's responsibility to ensure
++ * it uses a value that the card supports.
++ *
++ * Returns 0 on success, -EINVAL if the host does not support the
++ * requested block size, or -EIO (etc.) if one of the resultant FBR block
++ * size register writes failed.
++ *
++ */
++int sdio_set_block_size(struct sdio_func *func, unsigned blksz)
++{
++ int ret;
++
++ if (blksz > func->card->host->max_blk_size)
++ return -EINVAL;
++
++ if (blksz == 0) {
++ blksz = min(min(
++ func->max_blksize,
++ func->card->host->max_blk_size),
++ 512u);
++ }
++
++ ret = mmc_io_rw_direct(func->card, 1, 0,
++ SDIO_FBR_BASE(func->num) + SDIO_FBR_BLKSIZE,
++ blksz & 0xff, NULL);
++ if (ret)
++ return ret;
++ ret = mmc_io_rw_direct(func->card, 1, 0,
++ SDIO_FBR_BASE(func->num) + SDIO_FBR_BLKSIZE + 1,
++ (blksz >> 8) & 0xff, NULL);
++ if (ret)
++ return ret;
++ func->cur_blksize = blksz;
++ return 0;
++}
++
++EXPORT_SYMBOL_GPL(sdio_set_block_size);
++
++/* Split an arbitrarily sized data transfer into several
++ * IO_RW_EXTENDED commands. */
++static int sdio_io_rw_ext_helper(struct sdio_func *func, int write,
++ unsigned addr, int incr_addr, u8 *buf, unsigned size)
++{
++ unsigned remainder = size;
++ unsigned max_blocks;
++ int ret;
++
++ /* Do the bulk of the transfer using block mode (if supported). */
++ if (func->card->cccr.multi_block) {
++ /* Blocks per command is limited by host count, host transfer
++ * size (we only use a single sg entry) and the maximum for
++ * IO_RW_EXTENDED of 511 blocks. */
++ max_blocks = min(min(
++ func->card->host->max_blk_count,
++ func->card->host->max_seg_size / func->cur_blksize),
++ 511u);
++
++ while (remainder > func->cur_blksize) {
++ unsigned blocks;
++
++ blocks = remainder / func->cur_blksize;
++ if (blocks > max_blocks)
++ blocks = max_blocks;
++ size = blocks * func->cur_blksize;
++
++ ret = mmc_io_rw_extended(func->card, write,
++ func->num, addr, incr_addr, buf,
++ blocks, func->cur_blksize);
++ if (ret)
++ return ret;
++
++ remainder -= size;
++ buf += size;
++ if (incr_addr)
++ addr += size;
++ }
++ }
++
++ /* Write the remainder using byte mode. */
++ while (remainder > 0) {
++ size = remainder;
++ if (size > func->cur_blksize)
++ size = func->cur_blksize;
++ if (size > 512)
++ size = 512; /* maximum size for byte mode */
++
++ ret = mmc_io_rw_extended(func->card, write, func->num, addr,
++ incr_addr, buf, 1, size);
++ if (ret)
++ return ret;
++
++ remainder -= size;
++ buf += size;
++ if (incr_addr)
++ addr += size;
++ }
++ return 0;
++}
++
++/**
++ * sdio_readb - read a single byte from a SDIO function
++ * @func: SDIO function to access
++ * @addr: address to read
++ * @err_ret: optional status value from transfer
++ *
++ * Reads a single byte from the address space of a given SDIO
++ * function. If there is a problem reading the address, 0xff
++ * is returned and @err_ret will contain the error code.
++ */
++unsigned char sdio_readb(struct sdio_func *func, unsigned int addr,
++ int *err_ret)
++{
++ int ret;
++ unsigned char val;
++
++ BUG_ON(!func);
++
++ if (err_ret)
++ *err_ret = 0;
++
++ ret = mmc_io_rw_direct(func->card, 0, func->num, addr, 0, &val);
++ if (ret) {
++ if (err_ret)
++ *err_ret = ret;
++ return 0xFF;
++ }
++
++ return val;
++}
++EXPORT_SYMBOL_GPL(sdio_readb);
++
++/**
++ * sdio_writeb - write a single byte to a SDIO function
++ * @func: SDIO function to access
++ * @b: byte to write
++ * @addr: address to write to
++ * @err_ret: optional status value from transfer
++ *
++ * Writes a single byte to the address space of a given SDIO
++ * function. @err_ret will contain the status of the actual
++ * transfer.
++ */
++void sdio_writeb(struct sdio_func *func, unsigned char b, unsigned int addr,
++ int *err_ret)
++{
++ int ret;
++
++ BUG_ON(!func);
++
++ ret = mmc_io_rw_direct(func->card, 1, func->num, addr, b, NULL);
++ if (err_ret)
++ *err_ret = ret;
++}
++EXPORT_SYMBOL_GPL(sdio_writeb);
++
++/**
++ * sdio_memcpy_fromio - read a chunk of memory from a SDIO function
++ * @func: SDIO function to access
++ * @dst: buffer to store the data
++ * @addr: address to begin reading from
++ * @count: number of bytes to read
++ *
++ * Reads from the address space of a given SDIO function. Return
++ * value indicates if the transfer succeeded or not.
++ */
++int sdio_memcpy_fromio(struct sdio_func *func, void *dst,
++ unsigned int addr, int count)
++{
++ return sdio_io_rw_ext_helper(func, 0, addr, 1, dst, count);
++}
++EXPORT_SYMBOL_GPL(sdio_memcpy_fromio);
++
++/**
++ * sdio_memcpy_toio - write a chunk of memory to a SDIO function
++ * @func: SDIO function to access
++ * @addr: address to start writing to
++ * @src: buffer that contains the data to write
++ * @count: number of bytes to write
++ *
++ * Writes to the address space of a given SDIO function. Return
++ * value indicates if the transfer succeeded or not.
++ */
++int sdio_memcpy_toio(struct sdio_func *func, unsigned int addr,
++ void *src, int count)
++{
++ return sdio_io_rw_ext_helper(func, 1, addr, 1, src, count);
++}
++EXPORT_SYMBOL_GPL(sdio_memcpy_toio);
++
++/**
++ * sdio_readsb - read from a FIFO on a SDIO function
++ * @func: SDIO function to access
++ * @dst: buffer to store the data
++ * @addr: address of (single byte) FIFO
++ * @count: number of bytes to read
++ *
++ * Reads from the specified FIFO of a given SDIO function. Return
++ * value indicates if the transfer succeeded or not.
++ */
++int sdio_readsb(struct sdio_func *func, void *dst, unsigned int addr,
++ int count)
++{
++ return sdio_io_rw_ext_helper(func, 0, addr, 0, dst, count);
++}
++
++EXPORT_SYMBOL_GPL(sdio_readsb);
++
++/**
++ * sdio_writesb - write to a FIFO of a SDIO function
++ * @func: SDIO function to access
++ * @addr: address of (single byte) FIFO
++ * @src: buffer that contains the data to write
++ * @count: number of bytes to write
++ *
++ * Writes to the specified FIFO of a given SDIO function. Return
++ * value indicates if the transfer succeeded or not.
++ */
++int sdio_writesb(struct sdio_func *func, unsigned int addr, void *src,
++ int count)
++{
++ return sdio_io_rw_ext_helper(func, 1, addr, 0, src, count);
++}
++EXPORT_SYMBOL_GPL(sdio_writesb);
++
++/**
++ * sdio_readw - read a 16 bit integer from a SDIO function
++ * @func: SDIO function to access
++ * @addr: address to read
++ * @err_ret: optional status value from transfer
++ *
++ * Reads a 16 bit integer from the address space of a given SDIO
++ * function. If there is a problem reading the address, 0xffff
++ * is returned and @err_ret will contain the error code.
++ */
++unsigned short sdio_readw(struct sdio_func *func, unsigned int addr,
++ int *err_ret)
++{
++ int ret;
++
++ if (err_ret)
++ *err_ret = 0;
++
++ ret = sdio_memcpy_fromio(func, func->tmpbuf, addr, 2);
++ if (ret) {
++ if (err_ret)
++ *err_ret = ret;
++ return 0xFFFF;
++ }
++
++ return le16_to_cpu(*(u16*)func->tmpbuf);
++}
++EXPORT_SYMBOL_GPL(sdio_readw);
++
++/**
++ * sdio_writew - write a 16 bit integer to a SDIO function
++ * @func: SDIO function to access
++ * @b: integer to write
++ * @addr: address to write to
++ * @err_ret: optional status value from transfer
++ *
++ * Writes a 16 bit integer to the address space of a given SDIO
++ * function. @err_ret will contain the status of the actual
++ * transfer.
++ */
++void sdio_writew(struct sdio_func *func, unsigned short b, unsigned int addr,
++ int *err_ret)
++{
++ int ret;
++
++ *(u16*)func->tmpbuf = cpu_to_le16(b);
++
++ ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 2);
++ if (err_ret)
++ *err_ret = ret;
++}
++EXPORT_SYMBOL_GPL(sdio_writew);
++
++/**
++ * sdio_readl - read a 32 bit integer from a SDIO function
++ * @func: SDIO function to access
++ * @addr: address to read
++ * @err_ret: optional status value from transfer
++ *
++ * Reads a 32 bit integer from the address space of a given SDIO
++ * function. If there is a problem reading the address,
++ * 0xffffffff is returned and @err_ret will contain the error
++ * code.
++ */
++unsigned long sdio_readl(struct sdio_func *func, unsigned int addr,
++ int *err_ret)
++{
++ int ret;
++
++ if (err_ret)
++ *err_ret = 0;
++
++ ret = sdio_memcpy_fromio(func, func->tmpbuf, addr, 4);
++ if (ret) {
++ if (err_ret)
++ *err_ret = ret;
++ return 0xFFFFFFFF;
++ }
++
++ return le32_to_cpu(*(u32*)func->tmpbuf);
++}
++EXPORT_SYMBOL_GPL(sdio_readl);
++
++/**
++ * sdio_writel - write a 32 bit integer to a SDIO function
++ * @func: SDIO function to access
++ * @b: integer to write
++ * @addr: address to write to
++ * @err_ret: optional status value from transfer
++ *
++ * Writes a 32 bit integer to the address space of a given SDIO
++ * function. @err_ret will contain the status of the actual
++ * transfer.
++ */
++void sdio_writel(struct sdio_func *func, unsigned long b, unsigned int addr,
++ int *err_ret)
++{
++ int ret;
++
++ *(u32*)func->tmpbuf = cpu_to_le32(b);
++
++ ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 4);
++ if (err_ret)
++ *err_ret = ret;
++}
++EXPORT_SYMBOL_GPL(sdio_writel);
++
++/**
++ * sdio_f0_readb - read a single byte from SDIO function 0
++ * @func: an SDIO function of the card
++ * @addr: address to read
++ * @err_ret: optional status value from transfer
++ *
++ * Reads a single byte from the address space of SDIO function 0.
++ * If there is a problem reading the address, 0xff is returned
++ * and @err_ret will contain the error code.
++ */
++unsigned char sdio_f0_readb(struct sdio_func *func, unsigned int addr,
++ int *err_ret)
++{
++ int ret;
++ unsigned char val;
++
++ BUG_ON(!func);
++
++ if (err_ret)
++ *err_ret = 0;
++
++ ret = mmc_io_rw_direct(func->card, 0, 0, addr, 0, &val);
++ if (ret) {
++ if (err_ret)
++ *err_ret = ret;
++ return 0xFF;
++ }
++
++ return val;
++}
++EXPORT_SYMBOL_GPL(sdio_f0_readb);
++
++/**
++ * sdio_f0_writeb - write a single byte to SDIO function 0
++ * @func: an SDIO function of the card
++ * @b: byte to write
++ * @addr: address to write to
++ * @err_ret: optional status value from transfer
++ *
++ * Writes a single byte to the address space of SDIO function 0.
++ * @err_ret will contain the status of the actual transfer.
++ *
++ * Only writes to the vendor specific CCCR registers (0xF0 -
++ * 0xFF) are permiited; @err_ret will be set to -EINVAL for *
++ * writes outside this range.
++ */
++void sdio_f0_writeb(struct sdio_func *func, unsigned char b, unsigned int addr,
++ int *err_ret)
++{
++ int ret;
++
++ BUG_ON(!func);
++
++ if (addr < 0xF0 || addr > 0xFF) {
++ if (err_ret)
++ *err_ret = -EINVAL;
++ return;
++ }
++
++ ret = mmc_io_rw_direct(func->card, 1, 0, addr, b, NULL);
++ if (err_ret)
++ *err_ret = ret;
++}
++EXPORT_SYMBOL_GPL(sdio_f0_writeb);
+Index: linux-2.6.23.16/drivers/mmc/core/sdio_irq.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/mmc/core/sdio_irq.c 2008-03-21 17:30:25.000000000 +0100
+@@ -0,0 +1,267 @@
++/*
++ * linux/drivers/mmc/core/sdio_irq.c
++ *
++ * Author: Nicolas Pitre
++ * Created: June 18, 2007
++ * Copyright: MontaVista Software Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or (at
++ * your option) any later version.
++ */
++
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/kthread.h>
++#include <linux/wait.h>
++#include <linux/delay.h>
++
++#include <linux/mmc/core.h>
++#include <linux/mmc/host.h>
++#include <linux/mmc/card.h>
++#include <linux/mmc/sdio.h>
++#include <linux/mmc/sdio_func.h>
++
++#include "sdio_ops.h"
++
++static int process_sdio_pending_irqs(struct mmc_card *card)
++{
++ int i, ret, count;
++ unsigned char pending;
++
++ ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTx, 0, &pending);
++ if (ret) {
++ printk(KERN_DEBUG "%s: error %d reading SDIO_CCCR_INTx\n",
++ mmc_card_id(card), ret);
++ return ret;
++ }
++
++ count = 0;
++ for (i = 1; i <= 7; i++) {
++ if (pending & (1 << i)) {
++ struct sdio_func *func = card->sdio_func[i - 1];
++ if (!func) {
++ printk(KERN_WARNING "%s: pending IRQ for "
++ "non-existant function\n",
++ mmc_card_id(card));
++ ret = -EINVAL;
++ } else if (func->irq_handler) {
++ func->irq_handler(func);
++ count++;
++ } else {
++ printk(KERN_WARNING "%s: pending IRQ with no handler\n",
++ sdio_func_id(func));
++ ret = -EINVAL;
++ }
++ }
++ }
++
++ if (count)
++ return count;
++
++ return ret;
++}
++
++static int sdio_irq_thread(void *_host)
++{
++ struct mmc_host *host = _host;
++ struct sched_param param = { .sched_priority = 1 };
++ unsigned long period, idle_period;
++ int ret;
++
++ sched_setscheduler(current, SCHED_FIFO, ¶m);
++
++ /*
++ * We want to allow for SDIO cards to work even on non SDIO
++ * aware hosts. One thing that non SDIO host cannot do is
++ * asynchronous notification of pending SDIO card interrupts
++ * hence we poll for them in that case.
++ */
++ idle_period = msecs_to_jiffies(10);
++ period = (host->caps & MMC_CAP_SDIO_IRQ) ?
++ MAX_SCHEDULE_TIMEOUT : idle_period;
++
++ pr_debug("%s: IRQ thread started (poll period = %lu jiffies)\n",
++ mmc_hostname(host), period);
++
++ do {
++ /*
++ * We claim the host here on drivers behalf for a couple
++ * reasons:
++ *
++ * 1) it is already needed to retrieve the CCCR_INTx;
++ * 2) we want the driver(s) to clear the IRQ condition ASAP;
++ * 3) we need to control the abort condition locally.
++ *
++ * Just like traditional hard IRQ handlers, we expect SDIO
++ * IRQ handlers to be quick and to the point, so that the
++ * holding of the host lock does not cover too much work
++ * that doesn't require that lock to be held.
++ */
++ ret = __mmc_claim_host(host, &host->sdio_irq_thread_abort);
++ if (ret)
++ break;
++ ret = process_sdio_pending_irqs(host->card);
++ mmc_release_host(host);
++
++ /*
++ * Give other threads a chance to run in the presence of
++ * errors. FIXME: determine if due to card removal and
++ * possibly exit this thread if so.
++ */
++ if (ret < 0)
++ ssleep(1);
++
++ /*
++ * Adaptive polling frequency based on the assumption
++ * that an interrupt will be closely followed by more.
++ * This has a substantial benefit for network devices.
++ */
++ if (!(host->caps & MMC_CAP_SDIO_IRQ)) {
++ if (ret > 0)
++ period /= 2;
++ else {
++ period++;
++ if (period > idle_period)
++ period = idle_period;
++ }
++ }
++
++ set_task_state(current, TASK_INTERRUPTIBLE);
++ if (host->caps & MMC_CAP_SDIO_IRQ)
++ host->ops->enable_sdio_irq(host, 1);
++ if (!kthread_should_stop())
++ schedule_timeout(period);
++ set_task_state(current, TASK_RUNNING);
++ } while (!kthread_should_stop());
++
++ if (host->caps & MMC_CAP_SDIO_IRQ)
++ host->ops->enable_sdio_irq(host, 0);
++
++ pr_debug("%s: IRQ thread exiting with code %d\n",
++ mmc_hostname(host), ret);
++
++ return ret;
++}
++
++static int sdio_card_irq_get(struct mmc_card *card)
++{
++ struct mmc_host *host = card->host;
++
++ WARN_ON(!host->claimed);
++
++ if (!host->sdio_irqs++) {
++ atomic_set(&host->sdio_irq_thread_abort, 0);
++ host->sdio_irq_thread =
++ kthread_run(sdio_irq_thread, host, "ksdiorqd");
++ if (IS_ERR(host->sdio_irq_thread)) {
++ int err = PTR_ERR(host->sdio_irq_thread);
++ host->sdio_irqs--;
++ return err;
++ }
++ }
++
++ return 0;
++}
++
++static int sdio_card_irq_put(struct mmc_card *card)
++{
++ struct mmc_host *host = card->host;
++
++ WARN_ON(!host->claimed);
++ BUG_ON(host->sdio_irqs < 1);
++
++ if (!--host->sdio_irqs) {
++ atomic_set(&host->sdio_irq_thread_abort, 1);
++ kthread_stop(host->sdio_irq_thread);
++ }
++
++ return 0;
++}
++
++/**
++ * sdio_claim_irq - claim the IRQ for a SDIO function
++ * @func: SDIO function
++ * @handler: IRQ handler callback
++ *
++ * Claim and activate the IRQ for the given SDIO function. The provided
++ * handler will be called when that IRQ is asserted. The host is always
++ * claimed already when the handler is called so the handler must not
++ * call sdio_claim_host() nor sdio_release_host().
++ */
++int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler)
++{
++ int ret;
++ unsigned char reg;
++
++ BUG_ON(!func);
++ BUG_ON(!func->card);
++
++ pr_debug("SDIO: Enabling IRQ for %s...\n", sdio_func_id(func));
++
++ if (func->irq_handler) {
++ pr_debug("SDIO: IRQ for %s already in use.\n", sdio_func_id(func));
++ return -EBUSY;
++ }
++
++ ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IENx, 0, ®);
++ if (ret)
++ return ret;
++
++ reg |= 1 << func->num;
++
++ reg |= 1; /* Master interrupt enable */
++
++ ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IENx, reg, NULL);
++ if (ret)
++ return ret;
++
++ func->irq_handler = handler;
++ ret = sdio_card_irq_get(func->card);
++ if (ret)
++ func->irq_handler = NULL;
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(sdio_claim_irq);
++
++/**
++ * sdio_release_irq - release the IRQ for a SDIO function
++ * @func: SDIO function
++ *
++ * Disable and release the IRQ for the given SDIO function.
++ */
++int sdio_release_irq(struct sdio_func *func)
++{
++ int ret;
++ unsigned char reg;
++
++ BUG_ON(!func);
++ BUG_ON(!func->card);
++
++ pr_debug("SDIO: Disabling IRQ for %s...\n", sdio_func_id(func));
++
++ if (func->irq_handler) {
++ func->irq_handler = NULL;
++ sdio_card_irq_put(func->card);
++ }
++
++ ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IENx, 0, ®);
++ if (ret)
++ return ret;
++
++ reg &= ~(1 << func->num);
++
++ /* Disable master interrupt with the last function interrupt */
++ if (!(reg & 0xFE))
++ reg = 0;
++
++ ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IENx, reg, NULL);
++ if (ret)
++ return ret;
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(sdio_release_irq);
++
+Index: linux-2.6.23.16/drivers/mmc/core/sdio_ops.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/mmc/core/sdio_ops.c 2008-03-21 17:30:25.000000000 +0100
+@@ -0,0 +1,175 @@
++/*
++ * linux/drivers/mmc/sdio_ops.c
++ *
++ * Copyright 2006-2007 Pierre Ossman
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or (at
++ * your option) any later version.
++ */
++
++#include <linux/scatterlist.h>
++
++#include <linux/mmc/host.h>
++#include <linux/mmc/card.h>
++#include <linux/mmc/mmc.h>
++#include <linux/mmc/sdio.h>
++
++#include "core.h"
++
++int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
++{
++ struct mmc_command cmd;
++ int i, err = 0;
++
++ BUG_ON(!host);
++
++ memset(&cmd, 0, sizeof(struct mmc_command));
++
++ cmd.opcode = SD_IO_SEND_OP_COND;
++ cmd.arg = ocr;
++ cmd.flags = MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR;
++
++ for (i = 100; i; i--) {
++ err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
++ if (err)
++ break;
++
++ /* if we're just probing, do a single pass */
++ if (ocr == 0)
++ break;
++
++ /* otherwise wait until reset completes */
++ if (mmc_host_is_spi(host)) {
++ /*
++ * Both R1_SPI_IDLE and MMC_CARD_BUSY indicate
++ * an initialized card under SPI, but some cards
++ * (Marvell's) only behave when looking at this
++ * one.
++ */
++ if (cmd.resp[1] & MMC_CARD_BUSY)
++ break;
++ } else {
++ if (cmd.resp[0] & MMC_CARD_BUSY)
++ break;
++ }
++
++ err = -ETIMEDOUT;
++
++ mmc_delay(10);
++ }
++
++ if (rocr)
++ *rocr = cmd.resp[mmc_host_is_spi(host) ? 1 : 0];
++
++ return err;
++}
++
++int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
++ unsigned addr, u8 in, u8* out)
++{
++ struct mmc_command cmd;
++ int err;
++
++ BUG_ON(!card);
++ BUG_ON(fn > 7);
++
++ memset(&cmd, 0, sizeof(struct mmc_command));
++
++ cmd.opcode = SD_IO_RW_DIRECT;
++ cmd.arg = write ? 0x80000000 : 0x00000000;
++ cmd.arg |= fn << 28;
++ cmd.arg |= (write && out) ? 0x08000000 : 0x00000000;
++ cmd.arg |= addr << 9;
++ cmd.arg |= in;
++ cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC;
++
++ err = mmc_wait_for_cmd(card->host, &cmd, 0);
++ if (err)
++ return err;
++
++ if (mmc_host_is_spi(card->host)) {
++ /* host driver already reported errors */
++ } else {
++ if (cmd.resp[0] & R5_ERROR)
++ return -EIO;
++ if (cmd.resp[0] & R5_FUNCTION_NUMBER)
++ return -EINVAL;
++ if (cmd.resp[0] & R5_OUT_OF_RANGE)
++ return -ERANGE;
++ }
++
++ if (out) {
++ if (mmc_host_is_spi(card->host))
++ *out = (cmd.resp[0] >> 8) & 0xFF;
++ else
++ *out = cmd.resp[0] & 0xFF;
++ }
++
++ return 0;
++}
++
++int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
++ unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz)
++{
++ struct mmc_request mrq;
++ struct mmc_command cmd;
++ struct mmc_data data;
++ struct scatterlist sg;
++
++ BUG_ON(!card);
++ BUG_ON(fn > 7);
++ BUG_ON(blocks == 1 && blksz > 512);
++ WARN_ON(blocks == 0);
++ WARN_ON(blksz == 0);
++
++ memset(&mrq, 0, sizeof(struct mmc_request));
++ memset(&cmd, 0, sizeof(struct mmc_command));
++ memset(&data, 0, sizeof(struct mmc_data));
++
++ mrq.cmd = &cmd;
++ mrq.data = &data;
++
++ cmd.opcode = SD_IO_RW_EXTENDED;
++ cmd.arg = write ? 0x80000000 : 0x00000000;
++ cmd.arg |= fn << 28;
++ cmd.arg |= incr_addr ? 0x04000000 : 0x00000000;
++ cmd.arg |= addr << 9;
++ if (blocks == 1 && blksz <= 512)
++ cmd.arg |= (blksz == 512) ? 0 : blksz; /* byte mode */
++ else
++ cmd.arg |= 0x08000000 | blocks; /* block mode */
++ cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
++
++ data.blksz = blksz;
++ data.blocks = blocks;
++ data.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
++ data.sg = &sg;
++ data.sg_len = 1;
++
++ sg_init_one(&sg, buf, blksz * blocks);
++
++ mmc_set_data_timeout(&data, card);
++
++ mmc_wait_for_req(card->host, &mrq);
++
++ if (cmd.error)
++ return cmd.error;
++ if (data.error)
++ return data.error;
++
++ if (mmc_host_is_spi(card->host)) {
++ /* host driver already reported errors */
++ } else {
++ if (cmd.resp[0] & R5_ERROR)
++ return -EIO;
++ if (cmd.resp[0] & R5_FUNCTION_NUMBER)
++ return -EINVAL;
++ if (cmd.resp[0] & R5_OUT_OF_RANGE)
++ return -ERANGE;
++ }
++
++ return 0;
++}
++
+Index: linux-2.6.23.16/drivers/mmc/core/sdio_ops.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/mmc/core/sdio_ops.h 2008-03-21 17:30:25.000000000 +0100
+@@ -0,0 +1,22 @@
++/*
++ * linux/drivers/mmc/sdio_ops.c
++ *
++ * Copyright 2006-2007 Pierre Ossman
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or (at
++ * your option) any later version.
++ */
++
++#ifndef _MMC_SDIO_OPS_H
++#define _MMC_SDIO_OPS_H
++
++int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr);
++int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
++ unsigned addr, u8 in, u8* out);
++int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
++ unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz);
++
++#endif
++
+Index: linux-2.6.23.16/include/linux/mmc/card.h
+===================================================================
+--- linux-2.6.23.16.orig/include/linux/mmc/card.h 2008-03-21 17:28:26.000000000 +0100
++++ linux-2.6.23.16/include/linux/mmc/card.h 2008-03-21 17:30:25.000000000 +0100
+@@ -55,7 +55,28 @@ struct sd_switch_caps {
+ unsigned int hs_max_dtr;
+ };
+
++struct sdio_cccr {
++ unsigned int sdio_vsn;
++ unsigned int sd_vsn;
++ unsigned int multi_block:1,
++ low_speed:1,
++ wide_bus:1,
++ high_power:1,
++ high_speed:1;
++};
++
++struct sdio_cis {
++ unsigned short vendor;
++ unsigned short device;
++ unsigned short blksize;
++ unsigned int max_dtr;
++};
++
+ struct mmc_host;
++struct sdio_func;
++struct sdio_func_tuple;
++
++#define SDIO_MAX_FUNCS 7
+
+ /*
+ * MMC device
+@@ -67,11 +88,13 @@ struct mmc_card {
+ unsigned int type; /* card type */
+ #define MMC_TYPE_MMC 0 /* MMC card */
+ #define MMC_TYPE_SD 1 /* SD card */
++#define MMC_TYPE_SDIO 2 /* SDIO card */
+ unsigned int state; /* (our) card state */
+ #define MMC_STATE_PRESENT (1<<0) /* present in sysfs */
+ #define MMC_STATE_READONLY (1<<1) /* card is read-only */
+ #define MMC_STATE_HIGHSPEED (1<<2) /* card is in high speed mode */
+ #define MMC_STATE_BLOCKADDR (1<<3) /* card uses block-addressing */
++
+ u32 raw_cid[4]; /* raw card CID */
+ u32 raw_csd[4]; /* raw card CSD */
+ u32 raw_scr[2]; /* raw card SCR */
+@@ -80,10 +103,19 @@ struct mmc_card {
+ struct mmc_ext_csd ext_csd; /* mmc v4 extended card specific */
+ struct sd_scr scr; /* extra SD information */
+ struct sd_switch_caps sw_caps; /* switch (CMD6) caps */
++
++ unsigned int sdio_funcs; /* number of SDIO functions */
++ struct sdio_cccr cccr; /* common card info */
++ struct sdio_cis cis; /* common tuple info */
++ struct sdio_func *sdio_func[SDIO_MAX_FUNCS]; /* SDIO functions (devices) */
++ unsigned num_info; /* number of info strings */
++ const char **info; /* info strings */
++ struct sdio_func_tuple *tuples; /* unknown common tuples */
+ };
+
+ #define mmc_card_mmc(c) ((c)->type == MMC_TYPE_MMC)
+ #define mmc_card_sd(c) ((c)->type == MMC_TYPE_SD)
++#define mmc_card_sdio(c) ((c)->type == MMC_TYPE_SDIO)
+
+ #define mmc_card_present(c) ((c)->state & MMC_STATE_PRESENT)
+ #define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY)
+Index: linux-2.6.23.16/include/linux/mmc/core.h
+===================================================================
+--- linux-2.6.23.16.orig/include/linux/mmc/core.h 2008-03-21 17:28:26.000000000 +0100
++++ linux-2.6.23.16/include/linux/mmc/core.h 2008-03-21 17:30:25.000000000 +0100
+@@ -25,14 +25,20 @@ struct mmc_command {
+ #define MMC_RSP_CRC (1 << 2) /* expect valid crc */
+ #define MMC_RSP_BUSY (1 << 3) /* card may send busy */
+ #define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */
+-#define MMC_CMD_MASK (3 << 5) /* command type */
++
++#define MMC_CMD_MASK (3 << 5) /* non-SPI command type */
+ #define MMC_CMD_AC (0 << 5)
+ #define MMC_CMD_ADTC (1 << 5)
+ #define MMC_CMD_BC (2 << 5)
+ #define MMC_CMD_BCR (3 << 5)
+
++#define MMC_RSP_SPI_S1 (1 << 7) /* one status byte */
++#define MMC_RSP_SPI_S2 (1 << 8) /* second byte */
++#define MMC_RSP_SPI_B4 (1 << 9) /* four data bytes */
++#define MMC_RSP_SPI_BUSY (1 << 10) /* card may send busy */
++
+ /*
+- * These are the response types, and correspond to valid bit
++ * These are the native response types, and correspond to valid bit
+ * patterns of the above flags. One additional valid pattern
+ * is all zeros, which means we don't expect a response.
+ */
+@@ -41,12 +47,30 @@ struct mmc_command {
+ #define MMC_RSP_R1B (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
+ #define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
+ #define MMC_RSP_R3 (MMC_RSP_PRESENT)
++#define MMC_RSP_R4 (MMC_RSP_PRESENT)
++#define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+ #define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+ #define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+
+ #define mmc_resp_type(cmd) ((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE))
+
+ /*
++ * These are the SPI response types for MMC, SD, and SDIO cards.
++ * Commands return R1, with maybe more info. Zero is an error type;
++ * callers must always provide the appropriate MMC_RSP_SPI_Rx flags.
++ */
++#define MMC_RSP_SPI_R1 (MMC_RSP_SPI_S1)
++#define MMC_RSP_SPI_R1B (MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY)
++#define MMC_RSP_SPI_R2 (MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
++#define MMC_RSP_SPI_R3 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
++#define MMC_RSP_SPI_R4 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
++#define MMC_RSP_SPI_R5 (MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
++#define MMC_RSP_SPI_R7 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
++
++#define mmc_spi_resp_type(cmd) ((cmd)->flags & \
++ (MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY|MMC_RSP_SPI_S2|MMC_RSP_SPI_B4))
++
++/*
+ * These are the command types.
+ */
+ #define mmc_cmd_type(cmd) ((cmd)->flags & MMC_CMD_MASK)
+@@ -54,12 +78,19 @@ struct mmc_command {
+ unsigned int retries; /* max number of retries */
+ unsigned int error; /* command error */
+
+-#define MMC_ERR_NONE 0
+-#define MMC_ERR_TIMEOUT 1
+-#define MMC_ERR_BADCRC 2
+-#define MMC_ERR_FIFO 3
+-#define MMC_ERR_FAILED 4
+-#define MMC_ERR_INVALID 5
++/*
++ * Standard errno values are used for errors, but some have specific
++ * meaning in the MMC layer:
++ *
++ * ETIMEDOUT Card took too long to respond
++ * EILSEQ Basic format problem with the received or sent data
++ * (e.g. CRC check failed, incorrect opcode in response
++ * or bad end bit)
++ * EINVAL Request cannot be performed because of restrictions
++ * in hardware and/or the driver
++ * ENOMEDIUM Host can determine that the slot is empty and is
++ * actively failing requests
++ */
+
+ struct mmc_data *data; /* data segment associated with cmd */
+ struct mmc_request *mrq; /* associated request */
+@@ -76,7 +107,6 @@ struct mmc_data {
+ #define MMC_DATA_WRITE (1 << 8)
+ #define MMC_DATA_READ (1 << 9)
+ #define MMC_DATA_STREAM (1 << 10)
+-#define MMC_DATA_MULTI (1 << 11)
+
+ unsigned int bytes_xfered;
+
+@@ -104,9 +134,20 @@ extern int mmc_wait_for_cmd(struct mmc_h
+ extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
+ struct mmc_command *, int);
+
+-extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *, int);
++extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *);
+
+-extern void mmc_claim_host(struct mmc_host *host);
++extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort);
+ extern void mmc_release_host(struct mmc_host *host);
+
++/**
++ * mmc_claim_host - exclusively claim a host
++ * @host: mmc host to claim
++ *
++ * Claim a host for a set of operations.
++ */
++static inline void mmc_claim_host(struct mmc_host *host)
++{
++ __mmc_claim_host(host, NULL);
++}
++
+ #endif
+Index: linux-2.6.23.16/include/linux/mmc/host.h
+===================================================================
+--- linux-2.6.23.16.orig/include/linux/mmc/host.h 2008-03-21 17:28:26.000000000 +0100
++++ linux-2.6.23.16/include/linux/mmc/host.h 2008-03-21 17:30:25.000000000 +0100
+@@ -10,6 +10,8 @@
+ #ifndef LINUX_MMC_HOST_H
+ #define LINUX_MMC_HOST_H
+
++#include <linux/leds.h>
++
+ #include <linux/mmc/core.h>
+
+ struct mmc_ios {
+@@ -51,6 +53,7 @@ struct mmc_host_ops {
+ void (*request)(struct mmc_host *host, struct mmc_request *req);
+ void (*set_ios)(struct mmc_host *host, struct mmc_ios *ios);
+ int (*get_ro)(struct mmc_host *host);
++ void (*enable_sdio_irq)(struct mmc_host *host, int enable);
+ };
+
+ struct mmc_card;
+@@ -87,9 +90,10 @@ struct mmc_host {
+
+ #define MMC_CAP_4_BIT_DATA (1 << 0) /* Can the host do 4 bit transfers */
+ #define MMC_CAP_MULTIWRITE (1 << 1) /* Can accurately report bytes sent to card on error */
+-#define MMC_CAP_BYTEBLOCK (1 << 2) /* Can do non-log2 block sizes */
+-#define MMC_CAP_MMC_HIGHSPEED (1 << 3) /* Can do MMC high-speed timing */
+-#define MMC_CAP_SD_HIGHSPEED (1 << 4) /* Can do SD high-speed timing */
++#define MMC_CAP_MMC_HIGHSPEED (1 << 2) /* Can do MMC high-speed timing */
++#define MMC_CAP_SD_HIGHSPEED (1 << 3) /* Can do SD high-speed timing */
++#define MMC_CAP_SDIO_IRQ (1 << 4) /* Can signal pending SDIO IRQs */
++#define MMC_CAP_SPI (1 << 5) /* Talks only SPI protocols */
+
+ /* host specific block data */
+ unsigned int max_seg_size; /* see blk_queue_max_segment_size */
+@@ -106,23 +110,30 @@ struct mmc_host {
+ struct mmc_ios ios; /* current io bus settings */
+ u32 ocr; /* the current OCR setting */
+
+- unsigned int mode; /* current card mode of host */
+-#define MMC_MODE_MMC 0
+-#define MMC_MODE_SD 1
++ /* group bitfields together to minimize padding */
++ unsigned int use_spi_crc:1;
++ unsigned int claimed:1; /* host exclusively claimed */
++ unsigned int bus_dead:1; /* bus has been released */
++#ifdef CONFIG_MMC_DEBUG
++ unsigned int removed:1; /* host is being removed */
++#endif
+
+ struct mmc_card *card; /* device attached to this host */
+
+ wait_queue_head_t wq;
+- unsigned int claimed:1; /* host exclusively claimed */
+
+ struct delayed_work detect;
+-#ifdef CONFIG_MMC_DEBUG
+- unsigned int removed:1; /* host is being removed */
+-#endif
+
+ const struct mmc_bus_ops *bus_ops; /* current bus driver */
+ unsigned int bus_refs; /* reference counter */
+- unsigned int bus_dead:1; /* bus has been released */
++
++ unsigned int sdio_irqs;
++ struct task_struct *sdio_irq_thread;
++ atomic_t sdio_irq_thread_abort;
++
++#ifdef CONFIG_LEDS_TRIGGERS
++ struct led_trigger *led; /* activity led */
++#endif
+
+ unsigned long private[0] ____cacheline_aligned;
+ };
+@@ -137,6 +148,8 @@ static inline void *mmc_priv(struct mmc_
+ return (void *)host->private;
+ }
+
++#define mmc_host_is_spi(host) ((host)->caps & MMC_CAP_SPI)
++
+ #define mmc_dev(x) ((x)->parent)
+ #define mmc_classdev(x) (&(x)->class_dev)
+ #define mmc_hostname(x) ((x)->class_dev.bus_id)
+@@ -147,5 +160,11 @@ extern int mmc_resume_host(struct mmc_ho
+ extern void mmc_detect_change(struct mmc_host *, unsigned long delay);
+ extern void mmc_request_done(struct mmc_host *, struct mmc_request *);
+
++static inline void mmc_signal_sdio_irq(struct mmc_host *host)
++{
++ host->ops->enable_sdio_irq(host, 0);
++ wake_up_process(host->sdio_irq_thread);
++}
++
+ #endif
+
+Index: linux-2.6.23.16/include/linux/mmc/mmc.h
+===================================================================
+--- linux-2.6.23.16.orig/include/linux/mmc/mmc.h 2008-03-21 17:28:26.000000000 +0100
++++ linux-2.6.23.16/include/linux/mmc/mmc.h 2008-03-21 17:30:25.000000000 +0100
+@@ -27,7 +27,7 @@
+
+ /* Standard MMC commands (4.1) type argument response */
+ /* class 1 */
+-#define MMC_GO_IDLE_STATE 0 /* bc */
++#define MMC_GO_IDLE_STATE 0 /* bc */
+ #define MMC_SEND_OP_COND 1 /* bcr [31:0] OCR R3 */
+ #define MMC_ALL_SEND_CID 2 /* bcr R2 */
+ #define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */
+@@ -39,8 +39,10 @@
+ #define MMC_SEND_CID 10 /* ac [31:16] RCA R2 */
+ #define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */
+ #define MMC_STOP_TRANSMISSION 12 /* ac R1b */
+-#define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */
++#define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */
+ #define MMC_GO_INACTIVE_STATE 15 /* ac [31:16] RCA */
++#define MMC_SPI_READ_OCR 58 /* spi spi_R3 */
++#define MMC_SPI_CRC_ON_OFF 59 /* spi [0:0] flag spi_R1 */
+
+ /* class 2 */
+ #define MMC_SET_BLOCKLEN 16 /* ac [31:0] block len R1 */
+@@ -90,15 +92,15 @@
+ */
+
+ /*
+- MMC status in R1
++ MMC status in R1, for native mode (SPI bits are different)
+ Type
+- e : error bit
++ e : error bit
+ s : status bit
+ r : detected and set for the actual command response
+ x : detected and set during command execution. the host must poll
+ the card by sending status command in order to read these bits.
+ Clear condition
+- a : according to the card state
++ a : according to the card state
+ b : always related to the previous command. Reception of
+ a valid command will clear it (with a delay of one command)
+ c : clear by read
+@@ -124,10 +126,33 @@
+ #define R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */
+ #define R1_ERASE_RESET (1 << 13) /* sr, c */
+ #define R1_STATUS(x) (x & 0xFFFFE000)
+-#define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */
++#define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */
+ #define R1_READY_FOR_DATA (1 << 8) /* sx, a */
+ #define R1_APP_CMD (1 << 5) /* sr, c */
+
++/*
++ * MMC/SD in SPI mode reports R1 status always, and R2 for SEND_STATUS
++ * R1 is the low order byte; R2 is the next highest byte, when present.
++ */
++#define R1_SPI_IDLE (1 << 0)
++#define R1_SPI_ERASE_RESET (1 << 1)
++#define R1_SPI_ILLEGAL_COMMAND (1 << 2)
++#define R1_SPI_COM_CRC (1 << 3)
++#define R1_SPI_ERASE_SEQ (1 << 4)
++#define R1_SPI_ADDRESS (1 << 5)
++#define R1_SPI_PARAMETER (1 << 6)
++/* R1 bit 7 is always zero */
++#define R2_SPI_CARD_LOCKED (1 << 8)
++#define R2_SPI_WP_ERASE_SKIP (1 << 9) /* or lock/unlock fail */
++#define R2_SPI_LOCK_UNLOCK_FAIL R2_SPI_WP_ERASE_SKIP
++#define R2_SPI_ERROR (1 << 10)
++#define R2_SPI_CC_ERROR (1 << 11)
++#define R2_SPI_CARD_ECC_ERROR (1 << 12)
++#define R2_SPI_WP_VIOLATION (1 << 13)
++#define R2_SPI_ERASE_PARAM (1 << 14)
++#define R2_SPI_OUT_OF_RANGE (1 << 15) /* or CSD overwrite */
++#define R2_SPI_CSD_OVERWRITE R2_SPI_OUT_OF_RANGE
++
+ /* These are unpacked versions of the actual responses */
+
+ struct _mmc_csd {
+@@ -182,6 +207,7 @@ struct _mmc_csd {
+ */
+ #define CCC_BASIC (1<<0) /* (0) Basic protocol functions */
+ /* (CMD0,1,2,3,4,7,9,10,12,13,15) */
++ /* (and for SPI, CMD58,59) */
+ #define CCC_STREAM_READ (1<<1) /* (1) Stream read commands */
+ /* (CMD11) */
+ #define CCC_BLOCK_READ (1<<2) /* (2) Block read commands */
+@@ -227,6 +253,7 @@ struct _mmc_csd {
+ #define EXT_CSD_BUS_WIDTH 183 /* R/W */
+ #define EXT_CSD_HS_TIMING 185 /* R/W */
+ #define EXT_CSD_CARD_TYPE 196 /* RO */
++#define EXT_CSD_REV 192 /* RO */
+ #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
+
+ /*
+Index: linux-2.6.23.16/include/linux/mmc/sdio.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/linux/mmc/sdio.h 2008-03-21 17:30:25.000000000 +0100
+@@ -0,0 +1,159 @@
++/*
++ * include/linux/mmc/sdio.h
++ *
++ * Copyright 2006-2007 Pierre Ossman
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or (at
++ * your option) any later version.
++ */
++
++#ifndef MMC_SDIO_H
++#define MMC_SDIO_H
++
++/* SDIO commands type argument response */
++#define SD_IO_SEND_OP_COND 5 /* bcr [23:0] OCR R4 */
++#define SD_IO_RW_DIRECT 52 /* ac [31:0] See below R5 */
++#define SD_IO_RW_EXTENDED 53 /* adtc [31:0] See below R5 */
++
++/*
++ * SD_IO_RW_DIRECT argument format:
++ *
++ * [31] R/W flag
++ * [30:28] Function number
++ * [27] RAW flag
++ * [25:9] Register address
++ * [7:0] Data
++ */
++
++/*
++ * SD_IO_RW_EXTENDED argument format:
++ *
++ * [31] R/W flag
++ * [30:28] Function number
++ * [27] Block mode
++ * [26] Increment address
++ * [25:9] Register address
++ * [8:0] Byte/block count
++ */
++
++/*
++ SDIO status in R5
++ Type
++ e : error bit
++ s : status bit
++ r : detected and set for the actual command response
++ x : detected and set during command execution. the host must poll
++ the card by sending status command in order to read these bits.
++ Clear condition
++ a : according to the card state
++ b : always related to the previous command. Reception of
++ a valid command will clear it (with a delay of one command)
++ c : clear by read
++ */
++
++#define R5_COM_CRC_ERROR (1 << 15) /* er, b */
++#define R5_ILLEGAL_COMMAND (1 << 14) /* er, b */
++#define R5_ERROR (1 << 11) /* erx, c */
++#define R5_FUNCTION_NUMBER (1 << 9) /* er, c */
++#define R5_OUT_OF_RANGE (1 << 8) /* er, c */
++#define R5_STATUS(x) (x & 0xCB00)
++#define R5_IO_CURRENT_STATE(x) ((x & 0x3000) >> 12) /* s, b */
++
++/*
++ * Card Common Control Registers (CCCR)
++ */
++
++#define SDIO_CCCR_CCCR 0x00
++
++#define SDIO_CCCR_REV_1_00 0 /* CCCR/FBR Version 1.00 */
++#define SDIO_CCCR_REV_1_10 1 /* CCCR/FBR Version 1.10 */
++#define SDIO_CCCR_REV_1_20 2 /* CCCR/FBR Version 1.20 */
++
++#define SDIO_SDIO_REV_1_00 0 /* SDIO Spec Version 1.00 */
++#define SDIO_SDIO_REV_1_10 1 /* SDIO Spec Version 1.10 */
++#define SDIO_SDIO_REV_1_20 2 /* SDIO Spec Version 1.20 */
++#define SDIO_SDIO_REV_2_00 3 /* SDIO Spec Version 2.00 */
++
++#define SDIO_CCCR_SD 0x01
++
++#define SDIO_SD_REV_1_01 0 /* SD Physical Spec Version 1.01 */
++#define SDIO_SD_REV_1_10 1 /* SD Physical Spec Version 1.10 */
++#define SDIO_SD_REV_2_00 2 /* SD Physical Spec Version 2.00 */
++
++#define SDIO_CCCR_IOEx 0x02
++#define SDIO_CCCR_IORx 0x03
++
++#define SDIO_CCCR_IENx 0x04 /* Function/Master Interrupt Enable */
++#define SDIO_CCCR_INTx 0x05 /* Function Interrupt Pending */
++
++#define SDIO_CCCR_ABORT 0x06 /* function abort/card reset */
++
++#define SDIO_CCCR_IF 0x07 /* bus interface controls */
++
++#define SDIO_BUS_WIDTH_1BIT 0x00
++#define SDIO_BUS_WIDTH_4BIT 0x02
++
++#define SDIO_BUS_CD_DISABLE 0x80 /* disable pull-up on DAT3 (pin 1) */
++
++#define SDIO_CCCR_CAPS 0x08
++
++#define SDIO_CCCR_CAP_SDC 0x01 /* can do CMD52 while data transfer */
++#define SDIO_CCCR_CAP_SMB 0x02 /* can do multi-block xfers (CMD53) */
++#define SDIO_CCCR_CAP_SRW 0x04 /* supports read-wait protocol */
++#define SDIO_CCCR_CAP_SBS 0x08 /* supports suspend/resume */
++#define SDIO_CCCR_CAP_S4MI 0x10 /* interrupt during 4-bit CMD53 */
++#define SDIO_CCCR_CAP_E4MI 0x20 /* enable ints during 4-bit CMD53 */
++#define SDIO_CCCR_CAP_LSC 0x40 /* low speed card */
++#define SDIO_CCCR_CAP_4BLS 0x80 /* 4 bit low speed card */
++
++#define SDIO_CCCR_CIS 0x09 /* common CIS pointer (3 bytes) */
++
++/* Following 4 regs are valid only if SBS is set */
++#define SDIO_CCCR_SUSPEND 0x0c
++#define SDIO_CCCR_SELx 0x0d
++#define SDIO_CCCR_EXECx 0x0e
++#define SDIO_CCCR_READYx 0x0f
++
++#define SDIO_CCCR_BLKSIZE 0x10
++
++#define SDIO_CCCR_POWER 0x12
++
++#define SDIO_POWER_SMPC 0x01 /* Supports Master Power Control */
++#define SDIO_POWER_EMPC 0x02 /* Enable Master Power Control */
++
++#define SDIO_CCCR_SPEED 0x13
++
++#define SDIO_SPEED_SHS 0x01 /* Supports High-Speed mode */
++#define SDIO_SPEED_EHS 0x02 /* Enable High-Speed mode */
++
++/*
++ * Function Basic Registers (FBR)
++ */
++
++#define SDIO_FBR_BASE(f) ((f) * 0x100) /* base of function f's FBRs */
++
++#define SDIO_FBR_STD_IF 0x00
++
++#define SDIO_FBR_SUPPORTS_CSA 0x40 /* supports Code Storage Area */
++#define SDIO_FBR_ENABLE_CSA 0x80 /* enable Code Storage Area */
++
++#define SDIO_FBR_STD_IF_EXT 0x01
++
++#define SDIO_FBR_POWER 0x02
++
++#define SDIO_FBR_POWER_SPS 0x01 /* Supports Power Selection */
++#define SDIO_FBR_POWER_EPS 0x02 /* Enable (low) Power Selection */
++
++#define SDIO_FBR_CIS 0x09 /* CIS pointer (3 bytes) */
++
++
++#define SDIO_FBR_CSA 0x0C /* CSA pointer (3 bytes) */
++
++#define SDIO_FBR_CSA_DATA 0x0F
++
++#define SDIO_FBR_BLKSIZE 0x10 /* block size (2 bytes) */
++
++#endif
++
+Index: linux-2.6.23.16/include/linux/mmc/sdio_func.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/linux/mmc/sdio_func.h 2008-03-21 17:30:25.000000000 +0100
+@@ -0,0 +1,153 @@
++/*
++ * include/linux/mmc/sdio_func.h
++ *
++ * Copyright 2007 Pierre Ossman
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or (at
++ * your option) any later version.
++ */
++
++#ifndef MMC_SDIO_FUNC_H
++#define MMC_SDIO_FUNC_H
++
++#include <linux/device.h>
++#include <linux/mod_devicetable.h>
++
++struct mmc_card;
++struct sdio_func;
++
++typedef void (sdio_irq_handler_t)(struct sdio_func *);
++
++/*
++ * SDIO function CIS tuple (unknown to the core)
++ */
++struct sdio_func_tuple {
++ struct sdio_func_tuple *next;
++ unsigned char code;
++ unsigned char size;
++ unsigned char data[0];
++};
++
++/*
++ * SDIO function devices
++ */
++struct sdio_func {
++ struct mmc_card *card; /* the card this device belongs to */
++ struct device dev; /* the device */
++ sdio_irq_handler_t *irq_handler; /* IRQ callback */
++ unsigned int num; /* function number */
++
++ unsigned char class; /* standard interface class */
++ unsigned short vendor; /* vendor id */
++ unsigned short device; /* device id */
++
++ unsigned max_blksize; /* maximum block size */
++ unsigned cur_blksize; /* current block size */
++
++ unsigned int state; /* function state */
++#define SDIO_STATE_PRESENT (1<<0) /* present in sysfs */
++
++ u8 tmpbuf[4]; /* DMA:able scratch buffer */
++
++ unsigned num_info; /* number of info strings */
++ const char **info; /* info strings */
++
++ struct sdio_func_tuple *tuples;
++};
++
++#define sdio_func_present(f) ((f)->state & SDIO_STATE_PRESENT)
++
++#define sdio_func_set_present(f) ((f)->state |= SDIO_STATE_PRESENT)
++
++#define sdio_func_id(f) ((f)->dev.bus_id)
++
++#define sdio_get_drvdata(f) dev_get_drvdata(&(f)->dev)
++#define sdio_set_drvdata(f,d) dev_set_drvdata(&(f)->dev, d)
++
++/*
++ * SDIO function device driver
++ */
++struct sdio_driver {
++ char *name;
++ const struct sdio_device_id *id_table;
++
++ int (*probe)(struct sdio_func *, const struct sdio_device_id *);
++ void (*remove)(struct sdio_func *);
++
++ struct device_driver drv;
++};
++
++/**
++ * SDIO_DEVICE - macro used to describe a specific SDIO device
++ * @vend: the 16 bit manufacturer code
++ * @dev: the 16 bit function id
++ *
++ * This macro is used to create a struct sdio_device_id that matches a
++ * specific device. The class field will be set to SDIO_ANY_ID.
++ */
++#define SDIO_DEVICE(vend,dev) \
++ .class = SDIO_ANY_ID, \
++ .vendor = (vend), .device = (dev)
++
++/**
++ * SDIO_DEVICE_CLASS - macro used to describe a specific SDIO device class
++ * @dev_class: the 8 bit standard interface code
++ *
++ * This macro is used to create a struct sdio_device_id that matches a
++ * specific standard SDIO function type. The vendor and device fields will
++ * be set to SDIO_ANY_ID.
++ */
++#define SDIO_DEVICE_CLASS(dev_class) \
++ .class = (dev_class), \
++ .vendor = SDIO_ANY_ID, .device = SDIO_ANY_ID
++
++extern int sdio_register_driver(struct sdio_driver *);
++extern void sdio_unregister_driver(struct sdio_driver *);
++
++/*
++ * SDIO I/O operations
++ */
++extern void sdio_claim_host(struct sdio_func *func);
++extern void sdio_release_host(struct sdio_func *func);
++
++extern int sdio_enable_func(struct sdio_func *func);
++extern int sdio_disable_func(struct sdio_func *func);
++
++extern int sdio_set_block_size(struct sdio_func *func, unsigned blksz);
++
++extern int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler);
++extern int sdio_release_irq(struct sdio_func *func);
++
++extern unsigned char sdio_readb(struct sdio_func *func,
++ unsigned int addr, int *err_ret);
++extern unsigned short sdio_readw(struct sdio_func *func,
++ unsigned int addr, int *err_ret);
++extern unsigned long sdio_readl(struct sdio_func *func,
++ unsigned int addr, int *err_ret);
++
++extern int sdio_memcpy_fromio(struct sdio_func *func, void *dst,
++ unsigned int addr, int count);
++extern int sdio_readsb(struct sdio_func *func, void *dst,
++ unsigned int addr, int count);
++
++extern void sdio_writeb(struct sdio_func *func, unsigned char b,
++ unsigned int addr, int *err_ret);
++extern void sdio_writew(struct sdio_func *func, unsigned short b,
++ unsigned int addr, int *err_ret);
++extern void sdio_writel(struct sdio_func *func, unsigned long b,
++ unsigned int addr, int *err_ret);
++
++extern int sdio_memcpy_toio(struct sdio_func *func, unsigned int addr,
++ void *src, int count);
++extern int sdio_writesb(struct sdio_func *func, unsigned int addr,
++ void *src, int count);
++
++extern unsigned char sdio_f0_readb(struct sdio_func *func,
++ unsigned int addr, int *err_ret);
++extern void sdio_f0_writeb(struct sdio_func *func, unsigned char b,
++ unsigned int addr, int *err_ret);
++
++#endif
++
+Index: linux-2.6.23.16/include/linux/mmc/sdio_ids.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/linux/mmc/sdio_ids.h 2008-03-21 17:30:25.000000000 +0100
+@@ -0,0 +1,29 @@
++/*
++ * SDIO Classes, Interface Types, Manufacturer IDs, etc.
++ */
++
++#ifndef MMC_SDIO_IDS_H
++#define MMC_SDIO_IDS_H
++
++/*
++ * Standard SDIO Function Interfaces
++ */
++
++#define SDIO_CLASS_NONE 0x00 /* Not a SDIO standard interface */
++#define SDIO_CLASS_UART 0x01 /* standard UART interface */
++#define SDIO_CLASS_BT_A 0x02 /* Type-A BlueTooth std interface */
++#define SDIO_CLASS_BT_B 0x03 /* Type-B BlueTooth std interface */
++#define SDIO_CLASS_GPS 0x04 /* GPS standard interface */
++#define SDIO_CLASS_CAMERA 0x05 /* Camera standard interface */
++#define SDIO_CLASS_PHS 0x06 /* PHS standard interface */
++#define SDIO_CLASS_WLAN 0x07 /* WLAN interface */
++#define SDIO_CLASS_ATA 0x08 /* Embedded SDIO-ATA std interface */
++
++/*
++ * Vendors and devices. Sort key: vendor first, device next.
++ */
++
++#define SDIO_VENDOR_ID_MARVELL 0x02df
++#define SDIO_DEVICE_ID_MARVELL_LIBERTAS 0x9103
++
++#endif
+Index: linux-2.6.23.16/include/linux/mod_devicetable.h
+===================================================================
+--- linux-2.6.23.16.orig/include/linux/mod_devicetable.h 2008-03-21 17:28:37.000000000 +0100
++++ linux-2.6.23.16/include/linux/mod_devicetable.h 2008-03-21 17:32:50.000000000 +0100
+@@ -22,6 +22,18 @@ struct pci_device_id {
+ };
+
+
++/* SDIO */
++
++#define SDIO_ANY_ID (~0)
++
++struct sdio_device_id {
++ __u8 class; /* Standard interface or SDIO_ANY_ID */
++ __u16 vendor; /* Vendor or SDIO_ANY_ID */
++ __u16 device; /* Device ID or SDIO_ANY_ID */
++ kernel_ulong_t driver_data; /* Data private to the driver */
++};
++
++
+ #define IEEE1394_MATCH_VENDOR_ID 0x0001
+ #define IEEE1394_MATCH_MODEL_ID 0x0002
+ #define IEEE1394_MATCH_SPECIFIER_ID 0x0004
+Index: linux-2.6.23.16/drivers/mmc/card/Kconfig
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mmc/card/Kconfig 2008-03-21 17:28:26.000000000 +0100
++++ linux-2.6.23.16/drivers/mmc/card/Kconfig 2008-03-21 17:30:25.000000000 +0100
+@@ -32,3 +32,10 @@ config MMC_BLOCK_BOUNCE
+
+ If unsure, say Y here.
+
++config SDIO_UART
++ tristate "SDIO UART/GPS class support"
++ depends on MMC
++ help
++ SDIO function driver for SDIO cards that implements the UART
++ class, as well as the GPS class which appears like a UART.
++
+Index: linux-2.6.23.16/drivers/mmc/card/Makefile
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mmc/card/Makefile 2008-03-21 17:28:26.000000000 +0100
++++ linux-2.6.23.16/drivers/mmc/card/Makefile 2008-03-21 17:30:25.000000000 +0100
+@@ -9,3 +9,5 @@ endif
+ obj-$(CONFIG_MMC_BLOCK) += mmc_block.o
+ mmc_block-objs := block.o queue.o
+
++obj-$(CONFIG_SDIO_UART) += sdio_uart.o
++
+Index: linux-2.6.23.16/drivers/mmc/card/block.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mmc/card/block.c 2008-03-21 17:28:26.000000000 +0100
++++ linux-2.6.23.16/drivers/mmc/card/block.c 2008-03-21 17:30:25.000000000 +0100
+@@ -44,6 +44,9 @@
+ * max 8 partitions per card
+ */
+ #define MMC_SHIFT 3
++#define MMC_NUM_MINORS (256 >> MMC_SHIFT)
++
++static unsigned long dev_use[MMC_NUM_MINORS/(8*sizeof(unsigned long))];
+
+ /*
+ * There is one mmc_blk_data per slot.
+@@ -80,6 +83,9 @@ static void mmc_blk_put(struct mmc_blk_d
+ mutex_lock(&open_lock);
+ md->usage--;
+ if (md->usage == 0) {
++ int devidx = md->disk->first_minor >> MMC_SHIFT;
++ __clear_bit(devidx, dev_use);
++
+ put_disk(md->disk);
+ kfree(md);
+ }
+@@ -151,17 +157,19 @@ static u32 mmc_sd_num_wr_blocks(struct m
+
+ cmd.opcode = MMC_APP_CMD;
+ cmd.arg = card->rca << 16;
+- cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
++ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+
+ err = mmc_wait_for_cmd(card->host, &cmd, 0);
+- if ((err != MMC_ERR_NONE) || !(cmd.resp[0] & R1_APP_CMD))
++ if (err)
++ return (u32)-1;
++ if (!mmc_host_is_spi(card->host) && !(cmd.resp[0] & R1_APP_CMD))
+ return (u32)-1;
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = SD_APP_SEND_NUM_WR_BLKS;
+ cmd.arg = 0;
+- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
++ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ memset(&data, 0, sizeof(struct mmc_data));
+
+@@ -192,7 +200,7 @@ static u32 mmc_sd_num_wr_blocks(struct m
+
+ mmc_wait_for_req(card->host, &mrq);
+
+- if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE)
++ if (cmd.error || data.error)
+ return (u32)-1;
+
+ blocks = ntohl(blocks);
+@@ -220,17 +228,15 @@ static int mmc_blk_issue_rq(struct mmc_q
+ brq.cmd.arg = req->sector;
+ if (!mmc_card_blockaddr(card))
+ brq.cmd.arg <<= 9;
+- brq.cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
++ brq.cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+ brq.data.blksz = 1 << md->block_bits;
+ brq.stop.opcode = MMC_STOP_TRANSMISSION;
+ brq.stop.arg = 0;
+- brq.stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
++ brq.stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
+ brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
+ if (brq.data.blocks > card->host->max_blk_count)
+ brq.data.blocks = card->host->max_blk_count;
+
+- mmc_set_data_timeout(&brq.data, card, rq_data_dir(req) != READ);
+-
+ /*
+ * If the host doesn't support multiple block writes, force
+ * block writes to single block. SD cards are excepted from
+@@ -243,8 +249,12 @@ static int mmc_blk_issue_rq(struct mmc_q
+ brq.data.blocks = 1;
+
+ if (brq.data.blocks > 1) {
+- brq.data.flags |= MMC_DATA_MULTI;
+- brq.mrq.stop = &brq.stop;
++ /* SPI multiblock writes terminate using a special
++ * token, not a STOP_TRANSMISSION request.
++ */
++ if (!mmc_host_is_spi(card->host)
++ || rq_data_dir(req) == READ)
++ brq.mrq.stop = &brq.stop;
+ readcmd = MMC_READ_MULTIPLE_BLOCK;
+ writecmd = MMC_WRITE_MULTIPLE_BLOCK;
+ } else {
+@@ -261,6 +271,8 @@ static int mmc_blk_issue_rq(struct mmc_q
+ brq.data.flags |= MMC_DATA_WRITE;
+ }
+
++ mmc_set_data_timeout(&brq.data, card);
++
+ brq.data.sg = mq->sg;
+ brq.data.sg_len = mmc_queue_map_sg(mq);
+
+@@ -302,7 +314,7 @@ static int mmc_blk_issue_rq(struct mmc_q
+ goto cmd_err;
+ }
+
+- if (rq_data_dir(req) != READ) {
++ if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) {
+ do {
+ int err;
+
+@@ -315,7 +327,13 @@ static int mmc_blk_issue_rq(struct mmc_q
+ req->rq_disk->disk_name, err);
+ goto cmd_err;
+ }
+- } while (!(cmd.resp[0] & R1_READY_FOR_DATA));
++ /*
++ * Some cards mishandle the status bits,
++ * so make sure to check both the busy
++ * indication and the card state.
++ */
++ } while (!(cmd.resp[0] & R1_READY_FOR_DATA) ||
++ (R1_CURRENT_STATE(cmd.resp[0]) == 7));
+
+ #if 0
+ if (cmd.resp[0] & ~0x00000900)
+@@ -394,9 +412,6 @@ static int mmc_blk_issue_rq(struct mmc_q
+ return 0;
+ }
+
+-#define MMC_NUM_MINORS (256 >> MMC_SHIFT)
+-
+-static unsigned long dev_use[MMC_NUM_MINORS/(8*sizeof(unsigned long))];
+
+ static inline int mmc_blk_readonly(struct mmc_card *card)
+ {
+@@ -510,7 +525,7 @@ mmc_blk_set_blksize(struct mmc_blk_data
+ mmc_claim_host(card->host);
+ cmd.opcode = MMC_SET_BLOCKLEN;
+ cmd.arg = 1 << md->block_bits;
+- cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
++ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+ err = mmc_wait_for_cmd(card->host, &cmd, 5);
+ mmc_release_host(card->host);
+
+@@ -562,17 +577,12 @@ static void mmc_blk_remove(struct mmc_ca
+ struct mmc_blk_data *md = mmc_get_drvdata(card);
+
+ if (md) {
+- int devidx;
+-
+ /* Stop new requests from getting into the queue */
+ del_gendisk(md->disk);
+
+ /* Then flush out any already in there */
+ mmc_cleanup_queue(&md->queue);
+
+- devidx = md->disk->first_minor >> MMC_SHIFT;
+- __clear_bit(devidx, dev_use);
+-
+ mmc_blk_put(md);
+ }
+ mmc_set_drvdata(card, NULL);
+Index: linux-2.6.23.16/drivers/mmc/card/queue.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mmc/card/queue.c 2008-03-21 17:28:26.000000000 +0100
++++ linux-2.6.23.16/drivers/mmc/card/queue.c 2008-03-21 17:30:25.000000000 +0100
+@@ -13,6 +13,7 @@
+ #include <linux/blkdev.h>
+ #include <linux/freezer.h>
+ #include <linux/kthread.h>
++#include <linux/scatterlist.h>
+
+ #include <linux/mmc/card.h>
+ #include <linux/mmc/host.h>
+@@ -22,6 +23,12 @@
+
+ #define MMC_QUEUE_SUSPENDED (1 << 0)
+
++#define sg_init_table(sg, n) do { \
++ memset(sg, 0, sizeof(*(sg)) * (n)); \
++} while (0)
++
++#define sg_virt(sg) (page_address((sg)->page) + (sg)->offset)
++
+ /*
+ * Prepare a MMC request. This just filters out odd stuff.
+ */
+@@ -159,6 +166,7 @@ int mmc_init_queue(struct mmc_queue *mq,
+ ret = -ENOMEM;
+ goto cleanup_queue;
+ }
++ sg_init_table(mq->sg, 1);
+
+ mq->bounce_sg = kmalloc(sizeof(struct scatterlist) *
+ bouncesz / 512, GFP_KERNEL);
+@@ -166,6 +174,7 @@ int mmc_init_queue(struct mmc_queue *mq,
+ ret = -ENOMEM;
+ goto cleanup_queue;
+ }
++ sg_init_table(mq->bounce_sg, bouncesz / 512);
+ }
+ }
+ #endif
+@@ -183,6 +192,7 @@ int mmc_init_queue(struct mmc_queue *mq,
+ ret = -ENOMEM;
+ goto cleanup_queue;
+ }
++ sg_init_table(mq->sg, host->max_phys_segs);
+ }
+
+ init_MUTEX(&mq->thread_sem);
+@@ -302,12 +312,12 @@ static void copy_sg(struct scatterlist *
+ BUG_ON(dst_len == 0);
+
+ if (dst_size == 0) {
+- dst_buf = page_address(dst->page) + dst->offset;
++ dst_buf = sg_virt(dst);
+ dst_size = dst->length;
+ }
+
+ if (src_size == 0) {
+- src_buf = page_address(src->page) + src->offset;
++ src_buf = sg_virt(src);
+ src_size = src->length;
+ }
+
+@@ -353,9 +363,7 @@ unsigned int mmc_queue_map_sg(struct mmc
+ return 1;
+ }
+
+- mq->sg[0].page = virt_to_page(mq->bounce_buf);
+- mq->sg[0].offset = offset_in_page(mq->bounce_buf);
+- mq->sg[0].length = 0;
++ sg_init_one(mq->sg, mq->bounce_buf, 0);
+
+ while (sg_len) {
+ mq->sg[0].length += mq->bounce_sg[sg_len - 1].length;
+Index: linux-2.6.23.16/drivers/mmc/card/sdio_uart.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/mmc/card/sdio_uart.c 2008-03-21 17:30:25.000000000 +0100
+@@ -0,0 +1,1158 @@
++/*
++ * linux/drivers/mmc/card/sdio_uart.c - SDIO UART/GPS driver
++ *
++ * Based on drivers/serial/8250.c and drivers/serial/serial_core.c
++ * by Russell King.
++ *
++ * Author: Nicolas Pitre
++ * Created: June 15, 2007
++ * Copyright: MontaVista Software, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or (at
++ * your option) any later version.
++ */
++
++/*
++ * Note: Although this driver assumes a 16550A-like UART implementation,
++ * it is not possible to leverage the common 8250/16550 driver, nor the
++ * core UART infrastructure, as they assumes direct access to the hardware
++ * registers, often under a spinlock. This is not possible in the SDIO
++ * context as SDIO access functions must be able to sleep.
++ *
++ * Because we need to lock the SDIO host to ensure an exclusive access to
++ * the card, we simply rely on that lock to also prevent and serialize
++ * concurrent access to the same port.
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/mutex.h>
++#include <linux/serial_reg.h>
++#include <linux/circ_buf.h>
++#include <linux/gfp.h>
++#include <linux/tty.h>
++#include <linux/tty_flip.h>
++
++#include <linux/mmc/core.h>
++#include <linux/mmc/card.h>
++#include <linux/mmc/sdio_func.h>
++#include <linux/mmc/sdio_ids.h>
++
++
++#define UART_NR 8 /* Number of UARTs this driver can handle */
++
++
++#define UART_XMIT_SIZE PAGE_SIZE
++#define WAKEUP_CHARS 256
++
++#define circ_empty(circ) ((circ)->head == (circ)->tail)
++#define circ_clear(circ) ((circ)->head = (circ)->tail = 0)
++
++#define circ_chars_pending(circ) \
++ (CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE))
++
++#define circ_chars_free(circ) \
++ (CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))
++
++
++struct uart_icount {
++ __u32 cts;
++ __u32 dsr;
++ __u32 rng;
++ __u32 dcd;
++ __u32 rx;
++ __u32 tx;
++ __u32 frame;
++ __u32 overrun;
++ __u32 parity;
++ __u32 brk;
++};
++
++struct sdio_uart_port {
++ struct kref kref;
++ struct tty_struct *tty;
++ unsigned int index;
++ unsigned int opened;
++ struct mutex open_lock;
++ struct sdio_func *func;
++ struct mutex func_lock;
++ struct task_struct *in_sdio_uart_irq;
++ unsigned int regs_offset;
++ struct circ_buf xmit;
++ spinlock_t write_lock;
++ struct uart_icount icount;
++ unsigned int uartclk;
++ unsigned int mctrl;
++ unsigned int read_status_mask;
++ unsigned int ignore_status_mask;
++ unsigned char x_char;
++ unsigned char ier;
++ unsigned char lcr;
++};
++
++static struct sdio_uart_port *sdio_uart_table[UART_NR];
++static DEFINE_SPINLOCK(sdio_uart_table_lock);
++
++static int sdio_uart_add_port(struct sdio_uart_port *port)
++{
++ int index, ret = -EBUSY;
++
++ kref_init(&port->kref);
++ mutex_init(&port->open_lock);
++ mutex_init(&port->func_lock);
++ spin_lock_init(&port->write_lock);
++
++ spin_lock(&sdio_uart_table_lock);
++ for (index = 0; index < UART_NR; index++) {
++ if (!sdio_uart_table[index]) {
++ port->index = index;
++ sdio_uart_table[index] = port;
++ ret = 0;
++ break;
++ }
++ }
++ spin_unlock(&sdio_uart_table_lock);
++
++ return ret;
++}
++
++static struct sdio_uart_port *sdio_uart_port_get(unsigned index)
++{
++ struct sdio_uart_port *port;
++
++ if (index >= UART_NR)
++ return NULL;
++
++ spin_lock(&sdio_uart_table_lock);
++ port = sdio_uart_table[index];
++ if (port)
++ kref_get(&port->kref);
++ spin_unlock(&sdio_uart_table_lock);
++
++ return port;
++}
++
++static void sdio_uart_port_destroy(struct kref *kref)
++{
++ struct sdio_uart_port *port =
++ container_of(kref, struct sdio_uart_port, kref);
++ kfree(port);
++}
++
++static void sdio_uart_port_put(struct sdio_uart_port *port)
++{
++ kref_put(&port->kref, sdio_uart_port_destroy);
++}
++
++static void sdio_uart_port_remove(struct sdio_uart_port *port)
++{
++ struct sdio_func *func;
++
++ BUG_ON(sdio_uart_table[port->index] != port);
++
++ spin_lock(&sdio_uart_table_lock);
++ sdio_uart_table[port->index] = NULL;
++ spin_unlock(&sdio_uart_table_lock);
++
++ /*
++ * We're killing a port that potentially still is in use by
++ * the tty layer. Be careful to prevent any further access
++ * to the SDIO function and arrange for the tty layer to
++ * give up on that port ASAP.
++ * Beware: the lock ordering is critical.
++ */
++ mutex_lock(&port->open_lock);
++ mutex_lock(&port->func_lock);
++ func = port->func;
++ sdio_claim_host(func);
++ port->func = NULL;
++ mutex_unlock(&port->func_lock);
++ if (port->opened)
++ tty_hangup(port->tty);
++ mutex_unlock(&port->open_lock);
++ sdio_release_irq(func);
++ sdio_disable_func(func);
++ sdio_release_host(func);
++
++ sdio_uart_port_put(port);
++}
++
++static int sdio_uart_claim_func(struct sdio_uart_port *port)
++{
++ mutex_lock(&port->func_lock);
++ if (unlikely(!port->func)) {
++ mutex_unlock(&port->func_lock);
++ return -ENODEV;
++ }
++ if (likely(port->in_sdio_uart_irq != current))
++ sdio_claim_host(port->func);
++ mutex_unlock(&port->func_lock);
++ return 0;
++}
++
++static inline void sdio_uart_release_func(struct sdio_uart_port *port)
++{
++ if (likely(port->in_sdio_uart_irq != current))
++ sdio_release_host(port->func);
++}
++
++static inline unsigned int sdio_in(struct sdio_uart_port *port, int offset)
++{
++ unsigned char c;
++ c = sdio_readb(port->func, port->regs_offset + offset, NULL);
++ return c;
++}
++
++static inline void sdio_out(struct sdio_uart_port *port, int offset, int value)
++{
++ sdio_writeb(port->func, value, port->regs_offset + offset, NULL);
++}
++
++static unsigned int sdio_uart_get_mctrl(struct sdio_uart_port *port)
++{
++ unsigned char status;
++ unsigned int ret;
++
++ status = sdio_in(port, UART_MSR);
++
++ ret = 0;
++ if (status & UART_MSR_DCD)
++ ret |= TIOCM_CAR;
++ if (status & UART_MSR_RI)
++ ret |= TIOCM_RNG;
++ if (status & UART_MSR_DSR)
++ ret |= TIOCM_DSR;
++ if (status & UART_MSR_CTS)
++ ret |= TIOCM_CTS;
++ return ret;
++}
++
++static void sdio_uart_write_mctrl(struct sdio_uart_port *port, unsigned int mctrl)
++{
++ unsigned char mcr = 0;
++
++ if (mctrl & TIOCM_RTS)
++ mcr |= UART_MCR_RTS;
++ if (mctrl & TIOCM_DTR)
++ mcr |= UART_MCR_DTR;
++ if (mctrl & TIOCM_OUT1)
++ mcr |= UART_MCR_OUT1;
++ if (mctrl & TIOCM_OUT2)
++ mcr |= UART_MCR_OUT2;
++ if (mctrl & TIOCM_LOOP)
++ mcr |= UART_MCR_LOOP;
++
++ sdio_out(port, UART_MCR, mcr);
++}
++
++static inline void sdio_uart_update_mctrl(struct sdio_uart_port *port,
++ unsigned int set, unsigned int clear)
++{
++ unsigned int old;
++
++ old = port->mctrl;
++ port->mctrl = (old & ~clear) | set;
++ if (old != port->mctrl)
++ sdio_uart_write_mctrl(port, port->mctrl);
++}
++
++#define sdio_uart_set_mctrl(port, x) sdio_uart_update_mctrl(port, x, 0)
++#define sdio_uart_clear_mctrl(port, x) sdio_uart_update_mctrl(port, 0, x)
++
++static void sdio_uart_change_speed(struct sdio_uart_port *port,
++ struct ktermios *termios,
++ struct ktermios *old)
++{
++ unsigned char cval, fcr = 0;
++ unsigned int baud, quot;
++
++ switch (termios->c_cflag & CSIZE) {
++ case CS5:
++ cval = UART_LCR_WLEN5;
++ break;
++ case CS6:
++ cval = UART_LCR_WLEN6;
++ break;
++ case CS7:
++ cval = UART_LCR_WLEN7;
++ break;
++ default:
++ case CS8:
++ cval = UART_LCR_WLEN8;
++ break;
++ }
++
++ if (termios->c_cflag & CSTOPB)
++ cval |= UART_LCR_STOP;
++ if (termios->c_cflag & PARENB)
++ cval |= UART_LCR_PARITY;
++ if (!(termios->c_cflag & PARODD))
++ cval |= UART_LCR_EPAR;
++
++ for (;;) {
++ baud = tty_termios_baud_rate(termios);
++ if (baud == 0)
++ baud = 9600; /* Special case: B0 rate. */
++ if (baud <= port->uartclk)
++ break;
++ /*
++ * Oops, the quotient was zero. Try again with the old
++ * baud rate if possible, otherwise default to 9600.
++ */
++ termios->c_cflag &= ~CBAUD;
++ if (old) {
++ termios->c_cflag |= old->c_cflag & CBAUD;
++ old = NULL;
++ } else
++ termios->c_cflag |= B9600;
++ }
++ quot = (2 * port->uartclk + baud) / (2 * baud);
++
++ if (baud < 2400)
++ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
++ else
++ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10;
++
++ port->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
++ if (termios->c_iflag & INPCK)
++ port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
++ if (termios->c_iflag & (BRKINT | PARMRK))
++ port->read_status_mask |= UART_LSR_BI;
++
++ /*
++ * Characters to ignore
++ */
++ port->ignore_status_mask = 0;
++ if (termios->c_iflag & IGNPAR)
++ port->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
++ if (termios->c_iflag & IGNBRK) {
++ port->ignore_status_mask |= UART_LSR_BI;
++ /*
++ * If we're ignoring parity and break indicators,
++ * ignore overruns too (for real raw support).
++ */
++ if (termios->c_iflag & IGNPAR)
++ port->ignore_status_mask |= UART_LSR_OE;
++ }
++
++ /*
++ * ignore all characters if CREAD is not set
++ */
++ if ((termios->c_cflag & CREAD) == 0)
++ port->ignore_status_mask |= UART_LSR_DR;
++
++ /*
++ * CTS flow control flag and modem status interrupts
++ */
++ port->ier &= ~UART_IER_MSI;
++ if ((termios->c_cflag & CRTSCTS) || !(termios->c_cflag & CLOCAL))
++ port->ier |= UART_IER_MSI;
++
++ port->lcr = cval;
++
++ sdio_out(port, UART_IER, port->ier);
++ sdio_out(port, UART_LCR, cval | UART_LCR_DLAB);
++ sdio_out(port, UART_DLL, quot & 0xff);
++ sdio_out(port, UART_DLM, quot >> 8);
++ sdio_out(port, UART_LCR, cval);
++ sdio_out(port, UART_FCR, fcr);
++
++ sdio_uart_write_mctrl(port, port->mctrl);
++}
++
++static void sdio_uart_start_tx(struct sdio_uart_port *port)
++{
++ if (!(port->ier & UART_IER_THRI)) {
++ port->ier |= UART_IER_THRI;
++ sdio_out(port, UART_IER, port->ier);
++ }
++}
++
++static void sdio_uart_stop_tx(struct sdio_uart_port *port)
++{
++ if (port->ier & UART_IER_THRI) {
++ port->ier &= ~UART_IER_THRI;
++ sdio_out(port, UART_IER, port->ier);
++ }
++}
++
++static void sdio_uart_stop_rx(struct sdio_uart_port *port)
++{
++ port->ier &= ~UART_IER_RLSI;
++ port->read_status_mask &= ~UART_LSR_DR;
++ sdio_out(port, UART_IER, port->ier);
++}
++
++static void sdio_uart_receive_chars(struct sdio_uart_port *port, unsigned int *status)
++{
++ struct tty_struct *tty = port->tty;
++ unsigned int ch, flag;
++ int max_count = 256;
++
++ do {
++ ch = sdio_in(port, UART_RX);
++ flag = TTY_NORMAL;
++ port->icount.rx++;
++
++ if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
++ UART_LSR_FE | UART_LSR_OE))) {
++ /*
++ * For statistics only
++ */
++ if (*status & UART_LSR_BI) {
++ *status &= ~(UART_LSR_FE | UART_LSR_PE);
++ port->icount.brk++;
++ } else if (*status & UART_LSR_PE)
++ port->icount.parity++;
++ else if (*status & UART_LSR_FE)
++ port->icount.frame++;
++ if (*status & UART_LSR_OE)
++ port->icount.overrun++;
++
++ /*
++ * Mask off conditions which should be ignored.
++ */
++ *status &= port->read_status_mask;
++ if (*status & UART_LSR_BI) {
++ flag = TTY_BREAK;
++ } else if (*status & UART_LSR_PE)
++ flag = TTY_PARITY;
++ else if (*status & UART_LSR_FE)
++ flag = TTY_FRAME;
++ }
++
++ if ((*status & port->ignore_status_mask & ~UART_LSR_OE) == 0)
++ tty_insert_flip_char(tty, ch, flag);
++
++ /*
++ * Overrun is special. Since it's reported immediately,
++ * it doesn't affect the current character.
++ */
++ if (*status & ~port->ignore_status_mask & UART_LSR_OE)
++ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
++
++ *status = sdio_in(port, UART_LSR);
++ } while ((*status & UART_LSR_DR) && (max_count-- > 0));
++ tty_flip_buffer_push(tty);
++}
++
++static void sdio_uart_transmit_chars(struct sdio_uart_port *port)
++{
++ struct circ_buf *xmit = &port->xmit;
++ int count;
++
++ if (port->x_char) {
++ sdio_out(port, UART_TX, port->x_char);
++ port->icount.tx++;
++ port->x_char = 0;
++ return;
++ }
++ if (circ_empty(xmit) || port->tty->stopped || port->tty->hw_stopped) {
++ sdio_uart_stop_tx(port);
++ return;
++ }
++
++ count = 16;
++ do {
++ sdio_out(port, UART_TX, xmit->buf[xmit->tail]);
++ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
++ port->icount.tx++;
++ if (circ_empty(xmit))
++ break;
++ } while (--count > 0);
++
++ if (circ_chars_pending(xmit) < WAKEUP_CHARS)
++ tty_wakeup(port->tty);
++
++ if (circ_empty(xmit))
++ sdio_uart_stop_tx(port);
++}
++
++static void sdio_uart_check_modem_status(struct sdio_uart_port *port)
++{
++ int status;
++
++ status = sdio_in(port, UART_MSR);
++
++ if ((status & UART_MSR_ANY_DELTA) == 0)
++ return;
++
++ if (status & UART_MSR_TERI)
++ port->icount.rng++;
++ if (status & UART_MSR_DDSR)
++ port->icount.dsr++;
++ if (status & UART_MSR_DDCD)
++ port->icount.dcd++;
++ if (status & UART_MSR_DCTS) {
++ port->icount.cts++;
++ if (port->tty->termios->c_cflag & CRTSCTS) {
++ int cts = (status & UART_MSR_CTS);
++ if (port->tty->hw_stopped) {
++ if (cts) {
++ port->tty->hw_stopped = 0;
++ sdio_uart_start_tx(port);
++ tty_wakeup(port->tty);
++ }
++ } else {
++ if (!cts) {
++ port->tty->hw_stopped = 1;
++ sdio_uart_stop_tx(port);
++ }
++ }
++ }
++ }
++}
++
++/*
++ * This handles the interrupt from one port.
++ */
++static void sdio_uart_irq(struct sdio_func *func)
++{
++ struct sdio_uart_port *port = sdio_get_drvdata(func);
++ unsigned int iir, lsr;
++
++ /*
++ * In a few places sdio_uart_irq() is called directly instead of
++ * waiting for the actual interrupt to be raised and the SDIO IRQ
++ * thread scheduled in order to reduce latency. However, some
++ * interaction with the tty core may end up calling us back
++ * (serial echo, flow control, etc.) through those same places
++ * causing undesirable effects. Let's stop the recursion here.
++ */
++ if (unlikely(port->in_sdio_uart_irq == current))
++ return;
++
++ iir = sdio_in(port, UART_IIR);
++ if (iir & UART_IIR_NO_INT)
++ return;
++
++ port->in_sdio_uart_irq = current;
++ lsr = sdio_in(port, UART_LSR);
++ if (lsr & UART_LSR_DR)
++ sdio_uart_receive_chars(port, &lsr);
++ sdio_uart_check_modem_status(port);
++ if (lsr & UART_LSR_THRE)
++ sdio_uart_transmit_chars(port);
++ port->in_sdio_uart_irq = NULL;
++}
++
++static int sdio_uart_startup(struct sdio_uart_port *port)
++{
++ unsigned long page;
++ int ret;
++
++ /*
++ * Set the TTY IO error marker - we will only clear this
++ * once we have successfully opened the port.
++ */
++ set_bit(TTY_IO_ERROR, &port->tty->flags);
++
++ /* Initialise and allocate the transmit buffer. */
++ page = __get_free_page(GFP_KERNEL);
++ if (!page)
++ return -ENOMEM;
++ port->xmit.buf = (unsigned char *)page;
++ circ_clear(&port->xmit);
++
++ ret = sdio_uart_claim_func(port);
++ if (ret)
++ goto err1;
++ ret = sdio_enable_func(port->func);
++ if (ret)
++ goto err2;
++ ret = sdio_claim_irq(port->func, sdio_uart_irq);
++ if (ret)
++ goto err3;
++
++ /*
++ * Clear the FIFO buffers and disable them.
++ * (they will be reenabled in sdio_change_speed())
++ */
++ sdio_out(port, UART_FCR, UART_FCR_ENABLE_FIFO);
++ sdio_out(port, UART_FCR, UART_FCR_ENABLE_FIFO |
++ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
++ sdio_out(port, UART_FCR, 0);
++
++ /*
++ * Clear the interrupt registers.
++ */
++ (void) sdio_in(port, UART_LSR);
++ (void) sdio_in(port, UART_RX);
++ (void) sdio_in(port, UART_IIR);
++ (void) sdio_in(port, UART_MSR);
++
++ /*
++ * Now, initialize the UART
++ */
++ sdio_out(port, UART_LCR, UART_LCR_WLEN8);
++
++ port->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE;
++ port->mctrl = TIOCM_OUT2;
++
++ sdio_uart_change_speed(port, port->tty->termios, NULL);
++
++ if (port->tty->termios->c_cflag & CBAUD)
++ sdio_uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
++
++ if (port->tty->termios->c_cflag & CRTSCTS)
++ if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS))
++ port->tty->hw_stopped = 1;
++
++ clear_bit(TTY_IO_ERROR, &port->tty->flags);
++
++ /* Kick the IRQ handler once while we're still holding the host lock */
++ sdio_uart_irq(port->func);
++
++ sdio_uart_release_func(port);
++ return 0;
++
++err3:
++ sdio_disable_func(port->func);
++err2:
++ sdio_uart_release_func(port);
++err1:
++ free_page((unsigned long)port->xmit.buf);
++ return ret;
++}
++
++static void sdio_uart_shutdown(struct sdio_uart_port *port)
++{
++ int ret;
++
++ ret = sdio_uart_claim_func(port);
++ if (ret)
++ goto skip;
++
++ sdio_uart_stop_rx(port);
++
++ /* TODO: wait here for TX FIFO to drain */
++
++ /* Turn off DTR and RTS early. */
++ if (port->tty->termios->c_cflag & HUPCL)
++ sdio_uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
++
++ /* Disable interrupts from this port */
++ sdio_release_irq(port->func);
++ port->ier = 0;
++ sdio_out(port, UART_IER, 0);
++
++ sdio_uart_clear_mctrl(port, TIOCM_OUT2);
++
++ /* Disable break condition and FIFOs. */
++ port->lcr &= ~UART_LCR_SBC;
++ sdio_out(port, UART_LCR, port->lcr);
++ sdio_out(port, UART_FCR, UART_FCR_ENABLE_FIFO |
++ UART_FCR_CLEAR_RCVR |
++ UART_FCR_CLEAR_XMIT);
++ sdio_out(port, UART_FCR, 0);
++
++ sdio_disable_func(port->func);
++
++ sdio_uart_release_func(port);
++
++skip:
++ /* Free the transmit buffer page. */
++ free_page((unsigned long)port->xmit.buf);
++}
++
++static int sdio_uart_open (struct tty_struct *tty, struct file * filp)
++{
++ struct sdio_uart_port *port;
++ int ret;
++
++ port = sdio_uart_port_get(tty->index);
++ if (!port)
++ return -ENODEV;
++
++ mutex_lock(&port->open_lock);
++
++ /*
++ * Make sure not to mess up with a dead port
++ * which has not been closed yet.
++ */
++ if (tty->driver_data && tty->driver_data != port) {
++ mutex_unlock(&port->open_lock);
++ sdio_uart_port_put(port);
++ return -EBUSY;
++ }
++
++ if (!port->opened) {
++ tty->driver_data = port;
++ port->tty = tty;
++ ret = sdio_uart_startup(port);
++ if (ret) {
++ tty->driver_data = NULL;
++ port->tty = NULL;
++ mutex_unlock(&port->open_lock);
++ sdio_uart_port_put(port);
++ return ret;
++ }
++ }
++ port->opened++;
++ mutex_unlock(&port->open_lock);
++ return 0;
++}
++
++static void sdio_uart_close(struct tty_struct *tty, struct file * filp)
++{
++ struct sdio_uart_port *port = tty->driver_data;
++
++ if (!port)
++ return;
++
++ mutex_lock(&port->open_lock);
++ BUG_ON(!port->opened);
++
++ /*
++ * This is messy. The tty layer calls us even when open()
++ * returned an error. Ignore this close request if tty->count
++ * is larger than port->count.
++ */
++ if (tty->count > port->opened) {
++ mutex_unlock(&port->open_lock);
++ return;
++ }
++
++ if (--port->opened == 0) {
++ tty->closing = 1;
++ sdio_uart_shutdown(port);
++ tty_ldisc_flush(tty);
++ port->tty = NULL;
++ tty->driver_data = NULL;
++ tty->closing = 0;
++ }
++ mutex_unlock(&port->open_lock);
++ sdio_uart_port_put(port);
++}
++
++static int sdio_uart_write(struct tty_struct * tty, const unsigned char *buf,
++ int count)
++{
++ struct sdio_uart_port *port = tty->driver_data;
++ struct circ_buf *circ = &port->xmit;
++ int c, ret = 0;
++
++ if (!port->func)
++ return -ENODEV;
++
++ spin_lock(&port->write_lock);
++ while (1) {
++ c = CIRC_SPACE_TO_END(circ->head, circ->tail, UART_XMIT_SIZE);
++ if (count < c)
++ c = count;
++ if (c <= 0)
++ break;
++ memcpy(circ->buf + circ->head, buf, c);
++ circ->head = (circ->head + c) & (UART_XMIT_SIZE - 1);
++ buf += c;
++ count -= c;
++ ret += c;
++ }
++ spin_unlock(&port->write_lock);
++
++ if ( !(port->ier & UART_IER_THRI)) {
++ int err = sdio_uart_claim_func(port);
++ if (!err) {
++ sdio_uart_start_tx(port);
++ sdio_uart_irq(port->func);
++ sdio_uart_release_func(port);
++ } else
++ ret = err;
++ }
++
++ return ret;
++}
++
++static int sdio_uart_write_room(struct tty_struct *tty)
++{
++ struct sdio_uart_port *port = tty->driver_data;
++ return port ? circ_chars_free(&port->xmit) : 0;
++}
++
++static int sdio_uart_chars_in_buffer(struct tty_struct *tty)
++{
++ struct sdio_uart_port *port = tty->driver_data;
++ return port ? circ_chars_pending(&port->xmit) : 0;
++}
++
++static void sdio_uart_send_xchar(struct tty_struct *tty, char ch)
++{
++ struct sdio_uart_port *port = tty->driver_data;
++
++ port->x_char = ch;
++ if (ch && !(port->ier & UART_IER_THRI)) {
++ if (sdio_uart_claim_func(port) != 0)
++ return;
++ sdio_uart_start_tx(port);
++ sdio_uart_irq(port->func);
++ sdio_uart_release_func(port);
++ }
++}
++
++static void sdio_uart_throttle(struct tty_struct *tty)
++{
++ struct sdio_uart_port *port = tty->driver_data;
++
++ if (!I_IXOFF(tty) && !(tty->termios->c_cflag & CRTSCTS))
++ return;
++
++ if (sdio_uart_claim_func(port) != 0)
++ return;
++
++ if (I_IXOFF(tty)) {
++ port->x_char = STOP_CHAR(tty);
++ sdio_uart_start_tx(port);
++ }
++
++ if (tty->termios->c_cflag & CRTSCTS)
++ sdio_uart_clear_mctrl(port, TIOCM_RTS);
++
++ sdio_uart_irq(port->func);
++ sdio_uart_release_func(port);
++}
++
++static void sdio_uart_unthrottle(struct tty_struct *tty)
++{
++ struct sdio_uart_port *port = tty->driver_data;
++
++ if (!I_IXOFF(tty) && !(tty->termios->c_cflag & CRTSCTS))
++ return;
++
++ if (sdio_uart_claim_func(port) != 0)
++ return;
++
++ if (I_IXOFF(tty)) {
++ if (port->x_char) {
++ port->x_char = 0;
++ } else {
++ port->x_char = START_CHAR(tty);
++ sdio_uart_start_tx(port);
++ }
++ }
++
++ if (tty->termios->c_cflag & CRTSCTS)
++ sdio_uart_set_mctrl(port, TIOCM_RTS);
++
++ sdio_uart_irq(port->func);
++ sdio_uart_release_func(port);
++}
++
++static void sdio_uart_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
++{
++ struct sdio_uart_port *port = tty->driver_data;
++ unsigned int cflag = tty->termios->c_cflag;
++
++#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
++
++ if ((cflag ^ old_termios->c_cflag) == 0 &&
++ RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0)
++ return;
++
++ if (sdio_uart_claim_func(port) != 0)
++ return;
++
++ sdio_uart_change_speed(port, tty->termios, old_termios);
++
++ /* Handle transition to B0 status */
++ if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD))
++ sdio_uart_clear_mctrl(port, TIOCM_RTS | TIOCM_DTR);
++
++ /* Handle transition away from B0 status */
++ if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) {
++ unsigned int mask = TIOCM_DTR;
++ if (!(cflag & CRTSCTS) || !test_bit(TTY_THROTTLED, &tty->flags))
++ mask |= TIOCM_RTS;
++ sdio_uart_set_mctrl(port, mask);
++ }
++
++ /* Handle turning off CRTSCTS */
++ if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) {
++ tty->hw_stopped = 0;
++ sdio_uart_start_tx(port);
++ }
++
++ /* Handle turning on CRTSCTS */
++ if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) {
++ if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS)) {
++ tty->hw_stopped = 1;
++ sdio_uart_stop_tx(port);
++ }
++ }
++
++ sdio_uart_release_func(port);
++}
++
++static void sdio_uart_break_ctl(struct tty_struct *tty, int break_state)
++{
++ struct sdio_uart_port *port = tty->driver_data;
++
++ if (sdio_uart_claim_func(port) != 0)
++ return;
++
++ if (break_state == -1)
++ port->lcr |= UART_LCR_SBC;
++ else
++ port->lcr &= ~UART_LCR_SBC;
++ sdio_out(port, UART_LCR, port->lcr);
++
++ sdio_uart_release_func(port);
++}
++
++static int sdio_uart_tiocmget(struct tty_struct *tty, struct file *file)
++{
++ struct sdio_uart_port *port = tty->driver_data;
++ int result;
++
++ result = sdio_uart_claim_func(port);
++ if (!result) {
++ result = port->mctrl | sdio_uart_get_mctrl(port);
++ sdio_uart_release_func(port);
++ }
++
++ return result;
++}
++
++static int sdio_uart_tiocmset(struct tty_struct *tty, struct file *file,
++ unsigned int set, unsigned int clear)
++{
++ struct sdio_uart_port *port = tty->driver_data;
++ int result;
++
++ result =sdio_uart_claim_func(port);
++ if(!result) {
++ sdio_uart_update_mctrl(port, set, clear);
++ sdio_uart_release_func(port);
++ }
++
++ return result;
++}
++
++static int sdio_uart_read_proc(char *page, char **start, off_t off,
++ int count, int *eof, void *data)
++{
++ int i, len = 0;
++ off_t begin = 0;
++
++ len += sprintf(page, "serinfo:1.0 driver%s%s revision:%s\n",
++ "", "", "");
++ for (i = 0; i < UART_NR && len < PAGE_SIZE - 96; i++) {
++ struct sdio_uart_port *port = sdio_uart_port_get(i);
++ if (port) {
++ len += sprintf(page+len, "%d: uart:SDIO", i);
++ if(capable(CAP_SYS_ADMIN)) {
++ len += sprintf(page + len, " tx:%d rx:%d",
++ port->icount.tx, port->icount.rx);
++ if (port->icount.frame)
++ len += sprintf(page + len, " fe:%d",
++ port->icount.frame);
++ if (port->icount.parity)
++ len += sprintf(page + len, " pe:%d",
++ port->icount.parity);
++ if (port->icount.brk)
++ len += sprintf(page + len, " brk:%d",
++ port->icount.brk);
++ if (port->icount.overrun)
++ len += sprintf(page + len, " oe:%d",
++ port->icount.overrun);
++ if (port->icount.cts)
++ len += sprintf(page + len, " cts:%d",
++ port->icount.cts);
++ if (port->icount.dsr)
++ len += sprintf(page + len, " dsr:%d",
++ port->icount.dsr);
++ if (port->icount.rng)
++ len += sprintf(page + len, " rng:%d",
++ port->icount.rng);
++ if (port->icount.dcd)
++ len += sprintf(page + len, " dcd:%d",
++ port->icount.dcd);
++ }
++ strcat(page, "\n");
++ len++;
++ sdio_uart_port_put(port);
++ }
++
++ if (len + begin > off + count)
++ goto done;
++ if (len + begin < off) {
++ begin += len;
++ len = 0;
++ }
++ }
++ *eof = 1;
++
++done:
++ if (off >= len + begin)
++ return 0;
++ *start = page + (off - begin);
++ return (count < begin + len - off) ? count : (begin + len - off);
++}
++
++static const struct tty_operations sdio_uart_ops = {
++ .open = sdio_uart_open,
++ .close = sdio_uart_close,
++ .write = sdio_uart_write,
++ .write_room = sdio_uart_write_room,
++ .chars_in_buffer = sdio_uart_chars_in_buffer,
++ .send_xchar = sdio_uart_send_xchar,
++ .throttle = sdio_uart_throttle,
++ .unthrottle = sdio_uart_unthrottle,
++ .set_termios = sdio_uart_set_termios,
++ .break_ctl = sdio_uart_break_ctl,
++ .tiocmget = sdio_uart_tiocmget,
++ .tiocmset = sdio_uart_tiocmset,
++ .read_proc = sdio_uart_read_proc,
++};
++
++static struct tty_driver *sdio_uart_tty_driver;
++
++static int sdio_uart_probe(struct sdio_func *func,
++ const struct sdio_device_id *id)
++{
++ struct sdio_uart_port *port;
++ int ret;
++
++ port = kzalloc(sizeof(struct sdio_uart_port), GFP_KERNEL);
++ if (!port)
++ return -ENOMEM;
++
++ if (func->class == SDIO_CLASS_UART) {
++ printk(KERN_WARNING "%s: need info on UART class basic setup\n",
++ sdio_func_id(func));
++ kfree(port);
++ return -ENOSYS;
++ } else if (func->class == SDIO_CLASS_GPS) {
++ /*
++ * We need tuple 0x91. It contains SUBTPL_SIOREG
++ * and SUBTPL_RCVCAPS.
++ */
++ struct sdio_func_tuple *tpl;
++ for (tpl = func->tuples; tpl; tpl = tpl->next) {
++ if (tpl->code != 0x91)
++ continue;
++ if (tpl->size < 10)
++ continue;
++ if (tpl->data[1] == 0) /* SUBTPL_SIOREG */
++ break;
++ }
++ if (!tpl) {
++ printk(KERN_WARNING
++ "%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",
++ sdio_func_id(func));
++ kfree(port);
++ return -EINVAL;
++ }
++ printk(KERN_DEBUG "%s: Register ID = 0x%02x, Exp ID = 0x%02x\n",
++ sdio_func_id(func), tpl->data[2], tpl->data[3]);
++ port->regs_offset = (tpl->data[4] << 0) |
++ (tpl->data[5] << 8) |
++ (tpl->data[6] << 16);
++ printk(KERN_DEBUG "%s: regs offset = 0x%x\n",
++ sdio_func_id(func), port->regs_offset);
++ port->uartclk = tpl->data[7] * 115200;
++ if (port->uartclk == 0)
++ port->uartclk = 115200;
++ printk(KERN_DEBUG "%s: clk %d baudcode %u 4800-div %u\n",
++ sdio_func_id(func), port->uartclk,
++ tpl->data[7], tpl->data[8] | (tpl->data[9] << 8));
++ } else {
++ kfree(port);
++ return -EINVAL;
++ }
++
++ port->func = func;
++ sdio_set_drvdata(func, port);
++
++ ret = sdio_uart_add_port(port);
++ if (ret) {
++ kfree(port);
++ } else {
++ struct device *dev;
++ dev = tty_register_device(sdio_uart_tty_driver, port->index, &func->dev);
++ if (IS_ERR(dev)) {
++ sdio_uart_port_remove(port);
++ ret = PTR_ERR(dev);
++ }
++ }
++
++ return ret;
++}
++
++static void sdio_uart_remove(struct sdio_func *func)
++{
++ struct sdio_uart_port *port = sdio_get_drvdata(func);
++
++ tty_unregister_device(sdio_uart_tty_driver, port->index);
++ sdio_uart_port_remove(port);
++}
++
++static const struct sdio_device_id sdio_uart_ids[] = {
++ { SDIO_DEVICE_CLASS(SDIO_CLASS_UART) },
++ { SDIO_DEVICE_CLASS(SDIO_CLASS_GPS) },
++ { /* end: all zeroes */ },
++};
++
++MODULE_DEVICE_TABLE(sdio, sdio_uart_ids);
++
++static struct sdio_driver sdio_uart_driver = {
++ .probe = sdio_uart_probe,
++ .remove = sdio_uart_remove,
++ .name = "sdio_uart",
++ .id_table = sdio_uart_ids,
++};
++
++static int __init sdio_uart_init(void)
++{
++ int ret;
++ struct tty_driver *tty_drv;
++
++ sdio_uart_tty_driver = tty_drv = alloc_tty_driver(UART_NR);
++ if (!tty_drv)
++ return -ENOMEM;
++
++ tty_drv->owner = THIS_MODULE;
++ tty_drv->driver_name = "sdio_uart";
++ tty_drv->name = "ttySDIO";
++ tty_drv->major = 0; /* dynamically allocated */
++ tty_drv->minor_start = 0;
++ tty_drv->type = TTY_DRIVER_TYPE_SERIAL;
++ tty_drv->subtype = SERIAL_TYPE_NORMAL;
++ tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
++ tty_drv->init_termios = tty_std_termios;
++ tty_drv->init_termios.c_cflag = B4800 | CS8 | CREAD | HUPCL | CLOCAL;
++ tty_drv->init_termios.c_ispeed = 4800;
++ tty_drv->init_termios.c_ospeed = 4800;
++ tty_set_operations(tty_drv, &sdio_uart_ops);
++
++ ret = tty_register_driver(tty_drv);
++ if (ret)
++ goto err1;
++
++ ret = sdio_register_driver(&sdio_uart_driver);
++ if (ret)
++ goto err2;
++
++ return 0;
++
++err2:
++ tty_unregister_driver(tty_drv);
++err1:
++ put_tty_driver(tty_drv);
++ return ret;
++}
++
++static void __exit sdio_uart_exit(void)
++{
++ sdio_unregister_driver(&sdio_uart_driver);
++ tty_unregister_driver(sdio_uart_tty_driver);
++ put_tty_driver(sdio_uart_tty_driver);
++}
++
++module_init(sdio_uart_init);
++module_exit(sdio_uart_exit);
++
++MODULE_AUTHOR("Nicolas Pitre");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.23.16/drivers/mmc/core/Makefile
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mmc/core/Makefile 2008-03-21 17:28:26.000000000 +0100
++++ linux-2.6.23.16/drivers/mmc/core/Makefile 2008-03-21 17:30:25.000000000 +0100
+@@ -8,5 +8,7 @@ endif
+
+ obj-$(CONFIG_MMC) += mmc_core.o
+ mmc_core-y := core.o sysfs.o bus.o host.o \
+- mmc.o mmc_ops.o sd.o sd_ops.o
++ mmc.o mmc_ops.o sd.o sd_ops.o \
++ sdio.o sdio_ops.o sdio_bus.o \
++ sdio_cis.o sdio_io.o sdio_irq.o
+
projects / openwrt / svn-archive / openwrt.git / commitdiff