/**
- * @file
- *
* "cvmx-usb.h" defines a set of low level USB functions to help
* developers create Octeon USB drivers for various operating
* systems. These functions provide a generic API to the Octeon
*
* At a high level the device driver needs to:
*
- * -# Call cvmx_usb_get_num_ports() to get the number of
- * supported ports.
- * -# Call cvmx_usb_initialize() for each Octeon USB port.
- * -# Enable the port using cvmx_usb_enable().
- * -# Either periodically, or in an interrupt handler, call
- * cvmx_usb_poll() to service USB events.
- * -# Manage pipes using cvmx_usb_open_pipe() and
- * cvmx_usb_close_pipe().
- * -# Manage transfers using cvmx_usb_submit_*() and
- * cvmx_usb_cancel*().
- * -# Shutdown USB on unload using cvmx_usb_shutdown().
+ * - Call cvmx_usb_get_num_ports() to get the number of
+ * supported ports.
+ * - Call cvmx_usb_initialize() for each Octeon USB port.
+ * - Enable the port using cvmx_usb_enable().
+ * - Either periodically, or in an interrupt handler, call
+ * cvmx_usb_poll() to service USB events.
+ * - Manage pipes using cvmx_usb_open_pipe() and
+ * cvmx_usb_close_pipe().
+ * - Manage transfers using cvmx_usb_submit_*() and
+ * cvmx_usb_cancel*().
+ * - Shutdown USB on unload using cvmx_usb_shutdown().
*
* To monitor USB status changes, the device driver must use
* cvmx_usb_register_callback() to register for events that it
* is interested in. Below are a few hints on successfully
* implementing a driver on top of this API.
*
- * <h2>Initialization</h2>
+ * == Initialization ==
*
* When a driver is first loaded, it is normally not necessary
* to bring up the USB port completely. Most operating systems
* initialize anything found, and then enable the hardware.
*
* In the probe phase you should:
- * -# Use cvmx_usb_get_num_ports() to determine the number of
- * USB port to be supported.
- * -# Allocate space for a cvmx_usb_state_t structure for each
- * port.
- * -# Tell the operating system about each port
+ * - Use cvmx_usb_get_num_ports() to determine the number of
+ * USB port to be supported.
+ * - Allocate space for a cvmx_usb_state_t structure for each
+ * port.
+ * - Tell the operating system about each port
*
* In the initialization phase you should:
- * -# Use cvmx_usb_initialize() on each port.
- * -# Do not call cvmx_usb_enable(). This leaves the USB port in
- * the disabled state until the operating system is ready.
+ * - Use cvmx_usb_initialize() on each port.
+ * - Do not call cvmx_usb_enable(). This leaves the USB port in
+ * the disabled state until the operating system is ready.
*
* Finally, in the enable phase you should:
- * -# Call cvmx_usb_enable() on the appropriate port.
- * -# Note that some operating system use a RESET instead of an
- * enable call. To implement RESET, you should call
- * cvmx_usb_disable() followed by cvmx_usb_enable().
+ * - Call cvmx_usb_enable() on the appropriate port.
+ * - Note that some operating system use a RESET instead of an
+ * enable call. To implement RESET, you should call
+ * cvmx_usb_disable() followed by cvmx_usb_enable().
*
- * <h2>Locking</h2>
+ * == Locking ==
*
* All of the functions in the cvmx-usb API assume exclusive
* access to the USB hardware and internal data structures. This
* take a lock to make sure that another core cannot call
* cvmx-usb.
*
- * <h2>Port callback</h2>
+ * == Port callback ==
*
* The port callback prototype needs to look as follows:
*
* int submit_handle,
* int bytes_transferred,
* void *user_data);
- * - @b usb is the cvmx_usb_state_t for the port.
- * - @b reason will always be
- * CVMX_USB_CALLBACK_PORT_CHANGED.
- * - @b status will always be CVMX_USB_COMPLETE_SUCCESS.
- * - @b pipe_handle will always be -1.
- * - @b submit_handle will always be -1.
- * - @b bytes_transferred will always be 0.
- * - @b user_data is the void pointer originally passed along
+ * - "usb" is the cvmx_usb_state_t for the port.
+ * - "reason" will always be CVMX_USB_CALLBACK_PORT_CHANGED.
+ * - "status" will always be CVMX_USB_COMPLETE_SUCCESS.
+ * - "pipe_handle" will always be -1.
+ * - "submit_handle" will always be -1.
+ * - "bytes_transferred" will always be 0.
+ * - "user_data" is the void pointer originally passed along
* with the callback. Use this for any state information you
* need.
*
* root port. Normally all the callback needs to do is tell the
* operating system to poll the root hub for status. Under
* Linux, this is performed by calling usb_hcd_poll_rh_status().
- * In the Linux driver we use @b user_data. to pass around the
+ * In the Linux driver we use "user_data". to pass around the
* Linux "hcd" structure. Once the port callback completes,
* Linux automatically calls octeon_usb_hub_status_data() which
* uses cvmx_usb_get_status() to determine the root port status.
*
- * <h2>Complete callback</h2>
+ * == Complete callback ==
*
* The completion callback prototype needs to look as follows:
*
* int submit_handle,
* int bytes_transferred,
* void *user_data);
- * - @b usb is the cvmx_usb_state_t for the port.
- * - @b reason will always be
- * CVMX_USB_CALLBACK_TRANSFER_COMPLETE.
- * - @b status will be one of the cvmx_usb_complete_t
- * enumerations.
- * - @b pipe_handle is the handle to the pipe the transaction
+ * - "usb" is the cvmx_usb_state_t for the port.
+ * - "reason" will always be CVMX_USB_CALLBACK_TRANSFER_COMPLETE.
+ * - "status" will be one of the cvmx_usb_complete_t enumerations.
+ * - "pipe_handle" is the handle to the pipe the transaction
* was originally submitted on.
- * - @b submit_handle is the handle returned by the original
+ * - "submit_handle" is the handle returned by the original
* cvmx_usb_submit_* call.
- * - @b bytes_transferred is the number of bytes successfully
+ * - "bytes_transferred" is the number of bytes successfully
* transferred in the transaction. This will be zero on most
* error conditions.
- * - @b user_data is the void pointer originally passed along
+ * - "user_data" is the void pointer originally passed along
* with the callback. Use this for any state information you
* need. For example, the Linux "urb" is stored in here in the
* Linux driver.
*
- * In general your callback handler should use @b status and @b
- * bytes_transferred to tell the operating system the how the
+ * In general your callback handler should use "status" and
+ * "bytes_transferred" to tell the operating system the how the
* transaction completed. Normally the pipe is not changed in
* this callback.
*
- * <h2>Canceling transactions</h2>
+ * == Canceling transactions ==
*
* When a transaction is cancelled using cvmx_usb_cancel*(), the
* actual length of time until the complete callback is called
* these cases, the complete handler will receive
* CVMX_USB_COMPLETE_CANCEL.
*
- * <h2>Handling pipes</h2>
+ * == Handling pipes ==
*
* USB "pipes" is a software construct created by this API to
* enable the ordering of usb transactions to a device endpoint.
* destroy a pipe for every transaction. A sequence of
* transaction to the same endpoint must use the same pipe.
*
- * <h2>Root Hub</h2>
+ * == Root Hub ==
*
* Some operating systems view the usb root port as a normal usb
* hub. These systems attempt to control the root hub with
* function to decode standard usb control messages into
* equivalent cvmx-usb API calls.
*
- * <h2>Interrupts</h2>
+ * == Interrupts ==
*
* If you plan on using usb interrupts, cvmx_usb_poll() must be
* called on every usb interrupt. It will read the usb state,
projects / openwrt / staging / blogic.git / commitdiff