regulator: pfuze100-regulator: Variable "val" in pfuze100_regulator_probe() could...

In function pfuze100_regulator_probe(), variable "val" could be
initialized if regmap_read() fails. However, "val" is used to
decide the control flow later in the if statement, which is
potentially unsafe.

Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Link: https://lore.kernel.org/r/20190929170957.14775-1-yzhai003@ucr.edu
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index df5df1c495adb861322e356d59c091bbf94b342f..689537927f6f7d1bf4543d246490460971913117 100644 (file)
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -788,7 +788,13 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
 
                /* SW2~SW4 high bit check and modify the voltage value table */
                if (i >= sw_check_start && i <= sw_check_end) {
-                       regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val);
+                       ret = regmap_read(pfuze_chip->regmap,
+                                               desc->vsel_reg, &val);
+                       if (ret) {
+                               dev_err(&client->dev, "Fails to read from the register.\n");
+                               return ret;
+                       }
+
                        if (val & sw_hi) {
                                if (pfuze_chip->chip_id == PFUZE3000 ||
                                        pfuze_chip->chip_id == PFUZE3001) {