/* BCM8481/BCM84823/BCM84833 PHY SECTION */
/******************************************************************/
static void bnx2x_save_848xx_spirom_version(struct bnx2x_phy *phy,
- struct link_params *params)
+ struct bnx2x *bp,
+ u8 port)
{
u16 val, fw_ver1, fw_ver2, cnt;
- u8 port;
- struct bnx2x *bp = params->bp;
- port = params->port;
+ if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) {
+ bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, 0x400f, &fw_ver1);
+ bnx2x_save_spirom_version(bp, port,
+ ((fw_ver1 & 0xf000)>>5) | (fw_ver1 & 0x7f),
+ phy->ver_addr);
+ } else {
+ /* For 32-bit registers in 848xx, access via MDIO2ARM i/f. */
+ /* (1) set reg 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */
+ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0014);
+ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200);
+ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81B, 0x0000);
+ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81C, 0x0300);
+ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x0009);
+
+ for (cnt = 0; cnt < 100; cnt++) {
+ bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val);
+ if (val & 1)
+ break;
+ udelay(5);
+ }
+ if (cnt == 100) {
+ DP(NETIF_MSG_LINK, "Unable to read 848xx "
+ "phy fw version(1)\n");
+ bnx2x_save_spirom_version(bp, port, 0,
+ phy->ver_addr);
+ return;
+ }
- /* For the 32 bits registers in 848xx, access via MDIO2ARM interface.*/
- /* (1) set register 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */
- bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0014);
- bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200);
- bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81B, 0x0000);
- bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81C, 0x0300);
- bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x0009);
- for (cnt = 0; cnt < 100; cnt++) {
- bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val);
- if (val & 1)
- break;
- udelay(5);
- }
- if (cnt == 100) {
- DP(NETIF_MSG_LINK, "Unable to read 848xx phy fw version(1)\n");
- bnx2x_save_spirom_version(bp, port, 0,
- phy->ver_addr);
- return;
- }
+ /* 2) read register 0xc200_0000 (SPI_FW_STATUS) */
+ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0000);
+ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200);
+ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x000A);
+ for (cnt = 0; cnt < 100; cnt++) {
+ bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val);
+ if (val & 1)
+ break;
+ udelay(5);
+ }
+ if (cnt == 100) {
+ DP(NETIF_MSG_LINK, "Unable to read 848xx phy fw "
+ "version(2)\n");
+ bnx2x_save_spirom_version(bp, port, 0,
+ phy->ver_addr);
+ return;
+ }
+ /* lower 16 bits of the register SPI_FW_STATUS */
+ bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81B, &fw_ver1);
+ /* upper 16 bits of register SPI_FW_STATUS */
+ bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81C, &fw_ver2);
- /* 2) read register 0xc200_0000 (SPI_FW_STATUS) */
- bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0000);
- bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200);
- bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x000A);
- for (cnt = 0; cnt < 100; cnt++) {
- bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val);
- if (val & 1)
- break;
- udelay(5);
- }
- if (cnt == 100) {
- DP(NETIF_MSG_LINK, "Unable to read 848xx phy fw version(2)\n");
- bnx2x_save_spirom_version(bp, port, 0,
+ bnx2x_save_spirom_version(bp, port, (fw_ver2<<16) | fw_ver1,
phy->ver_addr);
- return;
}
- /* lower 16 bits of the register SPI_FW_STATUS */
- bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81B, &fw_ver1);
- /* upper 16 bits of register SPI_FW_STATUS */
- bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81C, &fw_ver2);
-
- bnx2x_save_spirom_version(bp, port, (fw_ver2<<16) | fw_ver1,
- phy->ver_addr);
}
-
static void bnx2x_848xx_set_led(struct bnx2x *bp,
struct bnx2x_phy *phy)
{
u16 tmp_req_line_speed;
tmp_req_line_speed = phy->req_line_speed;
- if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
+ if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) {
if (phy->req_line_speed == SPEED_10000)
phy->req_line_speed = SPEED_AUTO_NEG;
-
+ } else {
+ /* Save spirom version */
+ bnx2x_save_848xx_spirom_version(phy, bp, params->port);
+ }
/*
* This phy uses the NIG latch mechanism since link indication
* arrives through its LED4 and not via its LASI signal, so we
MDIO_AN_REG_8481_10GBASE_T_AN_CTRL,
1);
- /* Save spirom version */
- bnx2x_save_848xx_spirom_version(phy, params);
-
phy->req_line_speed = tmp_req_line_speed;
return 0;
/* Wait for GPHY to come out of reset */
msleep(50);
- if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) {
- /* Bring PHY out of super isolate mode */
- bnx2x_cl45_read(bp, phy,
- MDIO_CTL_DEVAD,
- MDIO_84833_TOP_CFG_XGPHY_STRAP1, &val);
- val &= ~MDIO_84833_SUPER_ISOLATE;
- bnx2x_cl45_write(bp, phy,
- MDIO_CTL_DEVAD,
- MDIO_84833_TOP_CFG_XGPHY_STRAP1, val);
- bnx2x_84833_pair_swap_cfg(phy, params, vars);
- } else {
+ if (phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) {
/*
* BCM84823 requires that XGXS links up first @ 10G for normal
* behavior.
DP(NETIF_MSG_LINK, "Multi_phy config = 0x%x, Media control = 0x%x\n",
params->multi_phy_config, val);
- /* AutogrEEEn */
- if (params->feature_config_flags &
- FEATURE_CONFIG_AUTOGREEEN_ENABLED)
- cmd_args[0] = 0x2;
- else
- cmd_args[0] = 0x0;
+ if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) {
+ bnx2x_84833_pair_swap_cfg(phy, params, vars);
- cmd_args[1] = 0x0;
- cmd_args[2] = PHY84833_CONSTANT_LATENCY + 1;
- cmd_args[3] = PHY84833_CONSTANT_LATENCY;
- rc = bnx2x_84833_cmd_hdlr(phy, params,
- PHY84833_CMD_SET_EEE_MODE, cmd_args);
- if (rc != 0)
- DP(NETIF_MSG_LINK, "Cfg AutogrEEEn failed.\n");
+ /* AutogrEEEn */
+ if (params->feature_config_flags &
+ FEATURE_CONFIG_AUTOGREEEN_ENABLED)
+ cmd_args[0] = 0x2;
+ else
+ cmd_args[0] = 0x0;
+ cmd_args[1] = 0x0;
+ cmd_args[2] = PHY84833_CONSTANT_LATENCY + 1;
+ cmd_args[3] = PHY84833_CONSTANT_LATENCY;
+ rc = bnx2x_84833_cmd_hdlr(phy, params,
+ PHY84833_CMD_SET_EEE_MODE, cmd_args);
+ if (rc != 0)
+ DP(NETIF_MSG_LINK, "Cfg AutogrEEEn failed.\n");
+ }
if (initialize)
rc = bnx2x_848xx_cmn_config_init(phy, params, vars);
else
- bnx2x_save_848xx_spirom_version(phy, params);
+ bnx2x_save_848xx_spirom_version(phy, bp, params->port);
/* 84833 PHY has a better feature and doesn't need to support this. */
if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823) {
cms_enable = REG_RD(bp, params->shmem_base +
MDIO_CTL_REG_84823_USER_CTRL_REG, val);
}
+ if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) {
+ /* Bring PHY out of super isolate mode as the final step. */
+ bnx2x_cl45_read(bp, phy,
+ MDIO_CTL_DEVAD,
+ MDIO_84833_TOP_CFG_XGPHY_STRAP1, &val);
+ val &= ~MDIO_84833_SUPER_ISOLATE;
+ bnx2x_cl45_write(bp, phy,
+ MDIO_CTL_DEVAD,
+ MDIO_84833_TOP_CFG_XGPHY_STRAP1, val);
+ }
return rc;
}
} else {
bnx2x_cl45_read(bp, phy,
MDIO_CTL_DEVAD,
- 0x400f, &val16);
+ MDIO_84833_TOP_CFG_XGPHY_STRAP1, &val16);
+ val16 |= MDIO_84833_SUPER_ISOLATE;
bnx2x_cl45_write(bp, phy,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_CTRL, 0x800);
+ MDIO_CTL_DEVAD,
+ MDIO_84833_TOP_CFG_XGPHY_STRAP1, val16);
}
}
u32 chip_id)
{
u8 reset_gpios;
- struct bnx2x_phy phy;
- u32 shmem_base, shmem2_base, cnt;
- s8 port = 0;
- u16 val;
-
reset_gpios = bnx2x_84833_get_reset_gpios(bp, shmem_base_path, chip_id);
bnx2x_set_mult_gpio(bp, reset_gpios, MISC_REGISTERS_GPIO_OUTPUT_LOW);
udelay(10);
bnx2x_set_mult_gpio(bp, reset_gpios, MISC_REGISTERS_GPIO_OUTPUT_HIGH);
DP(NETIF_MSG_LINK, "84833 reset pulse on pin values 0x%x\n",
reset_gpios);
- for (port = PORT_MAX - 1; port >= PORT_0; port--) {
- /* This PHY is for E2 and E3. */
- shmem_base = shmem_base_path[port];
- shmem2_base = shmem2_base_path[port];
- /* Extract the ext phy address for the port */
- if (bnx2x_populate_phy(bp, phy_index, shmem_base, shmem2_base,
- 0, &phy) !=
- 0) {
- DP(NETIF_MSG_LINK, "populate_phy failed\n");
- return -EINVAL;
- }
+ return 0;
+}
- /* Wait for FW completing its initialization. */
- for (cnt = 0; cnt < 1000; cnt++) {
- bnx2x_cl45_read(bp, &phy,
+static int bnx2x_84833_pre_init_phy(struct bnx2x *bp,
+ struct bnx2x_phy *phy)
+{
+ u16 val, cnt;
+ /* Wait for FW completing its initialization. */
+ for (cnt = 0; cnt < 1500; cnt++) {
+ bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_CTRL, &val);
- if (!(val & (1<<15)))
- break;
- msleep(1);
- }
- if (cnt >= 1000)
- DP(NETIF_MSG_LINK,
- "84833 Cmn reset timeout (%d)\n", port);
-
- /* Put the port in super isolate mode. */
- bnx2x_cl45_read(bp, &phy,
- MDIO_CTL_DEVAD,
- MDIO_84833_TOP_CFG_XGPHY_STRAP1, &val);
- val |= MDIO_84833_SUPER_ISOLATE;
- bnx2x_cl45_write(bp, &phy,
- MDIO_CTL_DEVAD,
- MDIO_84833_TOP_CFG_XGPHY_STRAP1, val);
+ if (!(val & (1<<15)))
+ break;
+ msleep(1);
+ }
+ if (cnt >= 1500) {
+ DP(NETIF_MSG_LINK, "84833 reset timeout\n");
+ return -EINVAL;
}
+ /* Put the port in super isolate mode. */
+ bnx2x_cl45_read(bp, phy,
+ MDIO_CTL_DEVAD,
+ MDIO_84833_TOP_CFG_XGPHY_STRAP1, &val);
+ val |= MDIO_84833_SUPER_ISOLATE;
+ bnx2x_cl45_write(bp, phy,
+ MDIO_CTL_DEVAD,
+ MDIO_84833_TOP_CFG_XGPHY_STRAP1, val);
+
+ /* Save spirom version */
+ bnx2x_save_848xx_spirom_version(phy, bp, PORT_0);
return 0;
}
+int bnx2x_pre_init_phy(struct bnx2x *bp,
+ u32 shmem_base,
+ u32 shmem2_base,
+ u32 chip_id)
+{
+ int rc = 0;
+ struct bnx2x_phy phy;
+ bnx2x_set_mdio_clk(bp, chip_id, PORT_0);
+ if (bnx2x_populate_phy(bp, EXT_PHY1, shmem_base, shmem2_base,
+ PORT_0, &phy)) {
+ DP(NETIF_MSG_LINK, "populate_phy failed\n");
+ return -EINVAL;
+ }
+ switch (phy.type) {
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833:
+ rc = bnx2x_84833_pre_init_phy(bp, &phy);
+ break;
+ default:
+ break;
+ }
+ return rc;
+}
static int bnx2x_ext_phy_common_init(struct bnx2x *bp, u32 shmem_base_path[],
u32 shmem2_base_path[], u8 phy_index,
projects / openwrt / staging / blogic.git / commitdiff