ath79: split dts file for Netgear WNDR4300

Move board configuration to dtsi file in preparation for WNDR3700v4
router support.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

diff --git a/target/linux/ath79/dts/ar9344_netgear_wndr.dtsi b/target/linux/ath79/dts/ar9344_netgear_wndr.dtsi
new file mode 100644 (file)
index 0000000..16a4e3f
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_netgear_wndr.dtsi
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9344.dtsi"
+
+/ {
+       chosen {
+               bootargs = "console=ttyS0,115200n8";
+       };
+
+       aliases {
+               led-boot = &led_power_amber;
+               led-failsafe = &led_power_amber;
+               led-running = &led_power_green;
+               led-upgrade = &led_power_amber;
+               label-mac-device = &eth0;
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               wps {
+                       label = "wps";
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+               };
+
+               reset {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+               };
+
+               rfkill {
+                       label = "rfkill";
+                       linux,code = <KEY_RFKILL>;
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&enable_gpio_11>;
+
+               led_power_green: power_green {
+                       label = "netgear:green:power";
+                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+               };
+
+               led_power_amber: power_amber {
+                       label = "netgear:amber:power";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+
+               wan_green {
+                       label = "netgear:green:wan";
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+               };
+
+               wan_amber {
+                       label = "netgear:amber:wan";
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+               };
+
+               wlan2g_green {
+                       label = "netgear:green:wlan2g";
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               wlan5g_blue {
+                       label = "netgear:blue:wlan5g";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
+               };
+
+               wps_green {
+                       label = "netgear:green:wps";
+                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+               };
+
+               wps_amber {
+                       label = "netgear:amber:wps";
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+               };
+
+               usb_green {
+                       label = "netgear:green:usb";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+                       trigger-sources = <&hub_port>;
+                       linux,default-trigger = "usbport";
+               };
+       };
+};
+
+&pinmux {
+       enable_gpio_11: pinmux_enable_gpio_11 {
+               pinctrl-single,bits = <0x8 0x0 0xff000000>;
+       };
+};
+
+&nand {
+       status = "okay";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x40000>;
+                       read-only;
+               };
+
+               partition@40000 {
+                       label = "u-boot-env";
+                       reg = <0x40000 0x40000>;
+               };
+
+               art: partition@80000 {
+                       label = "caldata";
+                       reg = <0x80000 0x40000>;
+                       read-only;
+               };
+
+               partition@c0000 {
+                       label = "pot";
+                       reg = <0xc0000 0x80000>;
+               };
+
+               partition@140000 {
+                       label = "language";
+                       reg = <0x140000 0x200000>;
+               };
+
+               partition@340000 {
+                       label = "config";
+                       reg = <0x340000 0x80000>;
+               };
+
+               partition@3c0000 {
+                       label = "traffic_meter";
+                       reg = <0x3c0000 0x300000>;
+               };
+
+               kernel@6c0000 {
+                       label = "kernel";
+                       reg = <0x6c0000 0x200000>;
+               };
+
+               ubi@8c0000 {
+                       label = "ubi";
+                       reg = <0x8c0000 0x1700000>;
+               };
+
+               partition@6c0000 {
+                       label = "firmware";
+                       reg = <0x6c0000 0x1900000>;
+                       compatible = "netgear,uimage";
+               };
+
+               partition@1fc0000 {
+                       label = "caldata_backup";
+                       reg = <0x1fc0000 0x40000>;
+                       read-only;
+               };
+
+               partition@2000000 {
+                       label = "reserved";
+                       reg = <0x2000000 0x6000000>;
+                       read-only;
+               };
+       };
+};
+
+&ref {
+       clock-frequency = <40000000>;
+};
+
+&builtin_switch {
+       resets = <&rst 8>, <&rst 12>;
+       reset-names = "switch", "switch-analog";
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy-mask = <0>;
+
+       phy0: ethernet-phy@0 {
+               reg = <0>;
+               phy-mode = "rgmii";
+               qca,mib-poll-interval = <500>;
+
+               qca,ar8327-initvals = <
+                       0x04 0x07600000
+                       0x0c 0x01000000
+                       0x10 0xc1000000
+                       0x50 0xcc35cc35
+                       0x54 0xcb37cb37
+                       0x58 0x00000000
+                       0x5c 0x00f3cf00
+                       0x7c 0x0000007e
+                       0x94 0x0000007e
+                       >;
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       /* default for ar934x, except for 1000M */
+       pll-data = <0x06000000 0x00000101 0x00001616>;
+
+       mtd-mac-address = <&art 0x0>;
+
+       phy-mode = "rgmii";
+       phy-handle = <&phy0>;
+};
+
+&gpio {
+       status = "okay";
+
+       lna0 {
+               gpio-hog;
+               line-name = "netgear:ext:lna0";
+               gpios = <18 GPIO_ACTIVE_HIGH>;
+               output-high;
+       };
+
+       lna1 {
+               gpio-hog;
+               line-name = "netgear:ext:lna1";
+               gpios = <19 GPIO_ACTIVE_HIGH>;
+               output-high;
+       };
+};
+
+&wmac {
+       status = "okay";
+
+       mtd-mac-address = <&art 0x0>;
+       qca,no-eeprom;
+};
+
+&pcie {
+       status = "okay";
+
+       ath9k: wifi@0,0 {
+               compatible = "pci168c,0033";
+               reg = <0x0000 0 0 0 0>;
+               mtd-mac-address = <&art 0xc>;
+               qca,no-eeprom;
+               #gpio-cells = <2>;
+               gpio-controller;
+
+               usb_power {
+                       gpio-hog;
+                       line-name = "netgear:power:usb";
+                       gpios = <0 GPIO_ACTIVE_HIGH>;
+                       output-high;
+               };
+       };
+};
+
+&usb_phy {
+       status = "okay";
+};
+
+&usb {
+       status = "okay";
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       hub_port: port@1 {
+               reg = <1>;
+               #trigger-source-cells = <0>;
+       };
+};
+
+&uart {
+       status = "okay";
+};

diff --git a/target/linux/ath79/dts/ar9344_netgear_wndr4300.dts b/target/linux/ath79/dts/ar9344_netgear_wndr4300.dts
index 08cd84e51e6d8b6f075dd23f00d8017309b8b6ba..9b57bb88a6334bafcb3d971ccf7a2f637ed9bde6 100644 (file)
--- a/target/linux/ath79/dts/ar9344_netgear_wndr4300.dts
+++ b/target/linux/ath79/dts/ar9344_netgear_wndr4300.dts
@@ -1,293 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9344.dtsi"
+#include "ar9344_netgear_wndr.dtsi"
 
 / {
        compatible = "netgear,wndr4300", "qca,ar9344";
        model = "Netgear WNDR4300";
-
-       chosen {
-               bootargs = "console=ttyS0,115200n8";
-       };
-
-       aliases {
-               led-boot = &led_power_amber;
-               led-failsafe = &led_power_amber;
-               led-running = &led_power_green;
-               led-upgrade = &led_power_amber;
-               label-mac-device = &eth0;
-       };
-
-       keys {
-               compatible = "gpio-keys";
-
-               wps {
-                       label = "wps";
-                       linux,code = <KEY_WPS_BUTTON>;
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-               };
-
-               reset {
-                       label = "reset";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
-               };
-
-               rfkill {
-                       label = "rfkill";
-                       linux,code = <KEY_RFKILL>;
-                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               pinctrl-names = "default";
-               pinctrl-0 = <&enable_gpio_11>;
-
-               led_power_green: power_green {
-                       label = "netgear:green:power";
-                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
-               };
-
-               led_power_amber: power_amber {
-                       label = "netgear:amber:power";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-
-               wan_green {
-                       label = "netgear:green:wan";
-                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-               };
-
-               wan_amber {
-                       label = "netgear:amber:wan";
-                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-               };
-
-               wlan2g_green {
-                       label = "netgear:green:wlan2g";
-                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy0tpt";
-               };
-
-               wlan5g_blue {
-                       label = "netgear:blue:wlan5g";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy1tpt";
-               };
-
-               wps_green {
-                       label = "netgear:green:wps";
-                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-               };
-
-               wps_amber {
-                       label = "netgear:amber:wps";
-                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-               };
-
-               usb_green {
-                       label = "netgear:green:usb";
-                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-                       trigger-sources = <&hub_port>;
-                       linux,default-trigger = "usbport";
-               };
-       };
-};
-
-&pinmux {
-       enable_gpio_11: pinmux_enable_gpio_11 {
-               pinctrl-single,bits = <0x8 0x0 0xff000000>;
-       };
-};
-
-&nand {
-       status = "okay";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x40000>;
-                       read-only;
-               };
-
-               partition@40000 {
-                       label = "u-boot-env";
-                       reg = <0x40000 0x40000>;
-               };
-
-               art: partition@80000 {
-                       label = "caldata";
-                       reg = <0x80000 0x40000>;
-                       read-only;
-               };
-
-               partition@c0000 {
-                       label = "pot";
-                       reg = <0xc0000 0x80000>;
-               };
-
-               partition@140000 {
-                       label = "language";
-                       reg = <0x140000 0x200000>;
-               };
-
-               partition@340000 {
-                       label = "config";
-                       reg = <0x340000 0x80000>;
-               };
-
-               partition@3c0000 {
-                       label = "traffic_meter";
-                       reg = <0x3c0000 0x300000>;
-               };
-
-               kernel@6c0000 {
-                       label = "kernel";
-                       reg = <0x6c0000 0x200000>;
-               };
-
-               ubi@8c0000 {
-                       label = "ubi";
-                       reg = <0x8c0000 0x1700000>;
-               };
-
-               partition@6c0000 {
-                       label = "firmware";
-                       reg = <0x6c0000 0x1900000>;
-                       compatible = "netgear,uimage";
-               };
-
-               partition@1fc0000 {
-                       label = "caldata_backup";
-                       reg = <0x1fc0000 0x40000>;
-                       read-only;
-               };
-
-               partition@2000000 {
-                       label = "reserved";
-                       reg = <0x2000000 0x6000000>;
-                       read-only;
-               };
-       };
-};
-
-&ref {
-       clock-frequency = <40000000>;
-};
-
-&builtin_switch {
-       resets = <&rst 8>, <&rst 12>;
-       reset-names = "switch", "switch-analog";
-};
-
-&mdio0 {
-       status = "okay";
-
-       phy-mask = <0>;
-
-       phy0: ethernet-phy@0 {
-               reg = <0>;
-               phy-mode = "rgmii";
-               qca,mib-poll-interval = <500>;
-
-               qca,ar8327-initvals = <
-                       0x04 0x07600000
-                       0x0c 0x01000000
-                       0x10 0xc1000000
-                       0x50 0xcc35cc35
-                       0x54 0xcb37cb37
-                       0x58 0x00000000
-                       0x5c 0x00f3cf00
-                       0x7c 0x0000007e
-                       0x94 0x0000007e
-                       >;
-       };
-};
-
-&eth0 {
-       status = "okay";
-
-       /* default for ar934x, except for 1000M */
-       pll-data = <0x06000000 0x00000101 0x00001616>;
-
-       mtd-mac-address = <&art 0x0>;
-
-       phy-mode = "rgmii";
-       phy-handle = <&phy0>;
-};
-
-&gpio {
-       status = "okay";
-
-       lna0 {
-               gpio-hog;
-               line-name = "netgear:ext:lna0";
-               gpios = <18 GPIO_ACTIVE_HIGH>;
-               output-high;
-       };
-
-       lna1 {
-               gpio-hog;
-               line-name = "netgear:ext:lna1";
-               gpios = <19 GPIO_ACTIVE_HIGH>;
-               output-high;
-       };
-};
-
-&wmac {
-       status = "okay";
-
-       mtd-mac-address = <&art 0x0>;
-       qca,no-eeprom;
-};
-
-&pcie {
-       status = "okay";
-
-       ath9k: wifi@0,0 {
-               compatible = "pci168c,0033";
-               reg = <0x0000 0 0 0 0>;
-               mtd-mac-address = <&art 0xc>;
-               qca,no-eeprom;
-               #gpio-cells = <2>;
-               gpio-controller;
-
-               usb_power {
-                       gpio-hog;
-                       line-name = "netgear:power:usb";
-                       gpios = <0 GPIO_ACTIVE_HIGH>;
-                       output-high;
-               };
-       };
-};
-
-&usb_phy {
-       status = "okay";
-};
-
-&usb {
-       status = "okay";
-       #address-cells = <1>;
-       #size-cells = <0>;
-
-       hub_port: port@1 {
-               reg = <1>;
-               #trigger-source-cells = <0>;
-       };
-};
-
-&uart {
-       status = "okay";
 };