static unsigned int ata_dev_init_params(struct ata_device *dev,
u16 heads, u16 sectors);
static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
-static unsigned int ata_dev_set_feature(struct ata_device *dev,
- u8 enable, u8 feature);
static void ata_dev_xfermask(struct ata_device *dev);
static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
* @params: timing parameters { interval, duratinon, timeout } in msec
* @deadline: deadline jiffies for the operation
*
-* Make sure SStatus of @link reaches stable state, determined by
+ * Make sure SStatus of @link reaches stable state, determined by
* holding the same value where DET is not 1 for @duration polled
* every @interval, before @timeout. Timeout constraints the
* beginning of the stable state. Because DET gets stuck at 1 on
return rc != -EINVAL ? rc : 0;
}
+/**
+ * sata_link_scr_lpm - manipulate SControl IPM and SPM fields
+ * @link: ATA link to manipulate SControl for
+ * @policy: LPM policy to configure
+ * @spm_wakeup: initiate LPM transition to active state
+ *
+ * Manipulate the IPM field of the SControl register of @link
+ * according to @policy. If @policy is ATA_LPM_MAX_POWER and
+ * @spm_wakeup is %true, the SPM field is manipulated to wake up
+ * the link. This function also clears PHYRDY_CHG before
+ * returning.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * 0 on succes, -errno otherwise.
+ */
+int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
+ bool spm_wakeup)
+{
+ struct ata_eh_context *ehc = &link->eh_context;
+ bool woken_up = false;
+ u32 scontrol;
+ int rc;
+
+ rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
+ if (rc)
+ return rc;
+
+ switch (policy) {
+ case ATA_LPM_MAX_POWER:
+ /* disable all LPM transitions */
+ scontrol |= (0x3 << 8);
+ /* initiate transition to active state */
+ if (spm_wakeup) {
+ scontrol |= (0x4 << 12);
+ woken_up = true;
+ }
+ break;
+ case ATA_LPM_MED_POWER:
+ /* allow LPM to PARTIAL */
+ scontrol &= ~(0x1 << 8);
+ scontrol |= (0x2 << 8);
+ break;
+ case ATA_LPM_MIN_POWER:
+ /* no restrictions on LPM transitions */
+ scontrol &= ~(0x3 << 8);
+ break;
+ default:
+ WARN_ON(1);
+ }
+
+ rc = sata_scr_write(link, SCR_CONTROL, scontrol);
+ if (rc)
+ return rc;
+
+ /* give the link time to transit out of LPM state */
+ if (woken_up)
+ msleep(10);
+
+ /* clear PHYRDY_CHG from SError */
+ ehc->i.serror &= ~SERR_PHYRDY_CHG;
+ return sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG);
+}
+
/**
* ata_std_prereset - prepare for reset
* @link: ATA link to be reset
DPRINTK("EXIT, err_mask=%x\n", err_mask);
return err_mask;
}
+
/**
* ata_dev_set_feature - Issue SET FEATURES - SATA FEATURES
* @dev: Device to which command will be sent
* RETURNS:
* 0 on success, AC_ERR_* mask otherwise.
*/
-static unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable,
- u8 feature)
+unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, u8 feature)
{
struct ata_taskfile tf;
unsigned int err_mask;
EXPORT_SYMBOL_GPL(ata_wait_after_reset);
EXPORT_SYMBOL_GPL(sata_link_debounce);
EXPORT_SYMBOL_GPL(sata_link_resume);
+EXPORT_SYMBOL_GPL(sata_link_scr_lpm);
EXPORT_SYMBOL_GPL(ata_std_prereset);
EXPORT_SYMBOL_GPL(sata_link_hardreset);
EXPORT_SYMBOL_GPL(sata_std_hardreset);