regulator: add pbias regulator support
authorBalaji T K <balajitk@ti.com>
Wed, 19 Feb 2014 14:56:40 +0000 (20:26 +0530)
committerChris Ball <chris@printf.net>
Tue, 4 Mar 2014 16:44:47 +0000 (11:44 -0500)
pbias register controls internal power supply to sd card i/o pads
in most OMAPs (OMAP2-5, DRA7).
Control bits for selecting voltage level and
enabling/disabling are in the same PBIAS register.

Signed-off-by: Balaji T K <balajitk@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Mark Brown <broonie@linaro.org>
Tested-by: Florian Vaussard <florian.vaussard@epfl.ch>
Tested-by: Stefan Roese <sr@denx.de>
Signed-off-by: Chris Ball <chris@printf.net>
Documentation/devicetree/bindings/regulator/pbias-regulator.txt [new file with mode: 0644]
drivers/regulator/Kconfig
drivers/regulator/Makefile
drivers/regulator/pbias-regulator.c [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/regulator/pbias-regulator.txt b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt
new file mode 100644 (file)
index 0000000..32aa26f
--- /dev/null
@@ -0,0 +1,27 @@
+PBIAS internal regulator for SD card dual voltage i/o pads on OMAP SoCs.
+
+Required properties:
+- compatible:
+  - "ti,pbias-omap" for OMAP2, OMAP3, OMAP4, OMAP5, DRA7.
+- reg: pbias register offset from syscon base and size of pbias register.
+- syscon : phandle of the system control module
+- regulator-name : should be
+                       pbias_mmc_omap2430 for OMAP2430, OMAP3 SoCs
+                       pbias_sim_omap3 for OMAP3 SoCs
+                       pbias_mmc_omap4 for OMAP4 SoCs
+                       pbias_mmc_omap5 for OMAP5 and DRA7 SoC
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+
+               pbias_regulator: pbias_regulator {
+                       compatible = "ti,pbias-omap";
+                       reg = <0 0x4>;
+                       syscon = <&omap5_padconf_global>;
+                       pbias_mmc_reg: pbias_mmc_omap5 {
+                               regulator-name = "pbias_mmc_omap5";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3000000>;
+                       };
index 6a7932822e373317caba9c5c799c9439f5444927..58f08d1d24e80ab3a4acc104f76d598b16cd4565 100644 (file)
@@ -384,6 +384,15 @@ config REGULATOR_PALMAS
          on the muxing. This is handled automatically in the driver by
          reading the mux info from OTP.
 
+config REGULATOR_PBIAS
+       tristate "PBIAS OMAP regulator driver"
+       depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
+       help
+        Say y here to support pbias regulator for mmc1:SD card i/o
+        on OMAP SoCs.
+        This driver provides support for OMAP pbias modelled
+        regulators.
+
 config REGULATOR_PCAP
        tristate "Motorola PCAP2 regulator driver"
        depends on EZX_PCAP
index 979f9ddcf259bd5a82b6b5d91f81981902e6185c..001712ebbf25e1fe1b5be254b36ff388464e8430 100644 (file)
@@ -54,6 +54,7 @@ obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
 obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
 obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
+obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o
 obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
 obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
 obj-$(CONFIG_REGULATOR_RC5T583)  += rc5t583-regulator.o
diff --git a/drivers/regulator/pbias-regulator.c b/drivers/regulator/pbias-regulator.c
new file mode 100644 (file)
index 0000000..ded3b35
--- /dev/null
@@ -0,0 +1,255 @@
+/*
+ * pbias-regulator.c
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Balaji T K <balajitk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+struct pbias_reg_info {
+       u32 enable;
+       u32 enable_mask;
+       u32 vmode;
+       unsigned int enable_time;
+       char *name;
+};
+
+struct pbias_regulator_data {
+       struct regulator_desc desc;
+       void __iomem *pbias_addr;
+       unsigned int pbias_reg;
+       struct regulator_dev *dev;
+       struct regmap *syscon;
+       const struct pbias_reg_info *info;
+       int voltage;
+};
+
+static int pbias_regulator_set_voltage(struct regulator_dev *dev,
+                       int min_uV, int max_uV, unsigned *selector)
+{
+       struct pbias_regulator_data *data = rdev_get_drvdata(dev);
+       const struct pbias_reg_info *info = data->info;
+       int ret, vmode;
+
+       if (min_uV <= 1800000)
+               vmode = 0;
+       else if (min_uV > 1800000)
+               vmode = info->vmode;
+
+       ret = regmap_update_bits(data->syscon, data->pbias_reg,
+                                               info->vmode, vmode);
+
+       return ret;
+}
+
+static int pbias_regulator_get_voltage(struct regulator_dev *rdev)
+{
+       struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+       const struct pbias_reg_info *info = data->info;
+       int value, voltage;
+
+       regmap_read(data->syscon, data->pbias_reg, &value);
+       value &= info->vmode;
+
+       voltage = value ? 3000000 : 1800000;
+
+       return voltage;
+}
+
+static int pbias_regulator_enable(struct regulator_dev *rdev)
+{
+       struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+       const struct pbias_reg_info *info = data->info;
+       int ret;
+
+       ret = regmap_update_bits(data->syscon, data->pbias_reg,
+                                       info->enable_mask, info->enable);
+
+       return ret;
+}
+
+static int pbias_regulator_disable(struct regulator_dev *rdev)
+{
+       struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+       const struct pbias_reg_info *info = data->info;
+       int ret;
+
+       ret = regmap_update_bits(data->syscon, data->pbias_reg,
+                                               info->enable_mask, 0);
+       return ret;
+}
+
+static int pbias_regulator_is_enable(struct regulator_dev *rdev)
+{
+       struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+       const struct pbias_reg_info *info = data->info;
+       int value;
+
+       regmap_read(data->syscon, data->pbias_reg, &value);
+
+       return (value & info->enable_mask) == info->enable_mask;
+}
+
+static struct regulator_ops pbias_regulator_voltage_ops = {
+       .set_voltage    = pbias_regulator_set_voltage,
+       .get_voltage    = pbias_regulator_get_voltage,
+       .enable         = pbias_regulator_enable,
+       .disable        = pbias_regulator_disable,
+       .is_enabled     = pbias_regulator_is_enable,
+};
+
+static const struct pbias_reg_info pbias_mmc_omap2430 = {
+       .enable = BIT(1),
+       .enable_mask = BIT(1),
+       .vmode = BIT(0),
+       .enable_time = 100,
+       .name = "pbias_mmc_omap2430"
+};
+
+static const struct pbias_reg_info pbias_sim_omap3 = {
+       .enable = BIT(9),
+       .enable_mask = BIT(9),
+       .vmode = BIT(8),
+       .enable_time = 100,
+       .name = "pbias_sim_omap3"
+};
+
+static const struct pbias_reg_info pbias_mmc_omap4 = {
+       .enable = BIT(26) | BIT(22),
+       .enable_mask = BIT(26) | BIT(25) | BIT(22),
+       .vmode = BIT(21),
+       .enable_time = 100,
+       .name = "pbias_mmc_omap4"
+};
+
+static const struct pbias_reg_info pbias_mmc_omap5 = {
+       .enable = BIT(27) | BIT(26),
+       .enable_mask = BIT(27) | BIT(25) | BIT(26),
+       .vmode = BIT(21),
+       .enable_time = 100,
+       .name = "pbias_mmc_omap5"
+};
+
+static struct of_regulator_match pbias_matches[] = {
+       { .name = "pbias_mmc_omap2430", .driver_data = (void *)&pbias_mmc_omap2430},
+       { .name = "pbias_sim_omap3", .driver_data = (void *)&pbias_sim_omap3},
+       { .name = "pbias_mmc_omap4", .driver_data = (void *)&pbias_mmc_omap4},
+       { .name = "pbias_mmc_omap5", .driver_data = (void *)&pbias_mmc_omap5},
+};
+#define PBIAS_NUM_REGS ARRAY_SIZE(pbias_matches)
+
+static const struct of_device_id pbias_of_match[] = {
+       { .compatible = "ti,pbias-omap", },
+       {},
+};
+MODULE_DEVICE_TABLE(of, pbias_of_match);
+
+static int pbias_regulator_probe(struct platform_device *pdev)
+{
+       struct device_node *np = pdev->dev.of_node;
+       struct pbias_regulator_data *drvdata;
+       struct resource *res;
+       struct regulator_config cfg = { };
+       struct regmap *syscon;
+       const struct pbias_reg_info *info;
+       int ret = 0;
+       int count, idx, data_idx = 0;
+
+       count = of_regulator_match(&pdev->dev, np, pbias_matches,
+                                               PBIAS_NUM_REGS);
+       if (count < 0)
+               return count;
+
+       drvdata = devm_kzalloc(&pdev->dev, sizeof(struct pbias_regulator_data)
+                              * count, GFP_KERNEL);
+       if (drvdata == NULL) {
+               dev_err(&pdev->dev, "Failed to allocate device data\n");
+               return -ENOMEM;
+       }
+
+       syscon = syscon_regmap_lookup_by_phandle(np, "syscon");
+       if (IS_ERR(syscon))
+               return PTR_ERR(syscon);
+
+       cfg.dev = &pdev->dev;
+
+       for (idx = 0; idx < PBIAS_NUM_REGS && data_idx < count; idx++) {
+               if (!pbias_matches[idx].init_data ||
+                       !pbias_matches[idx].of_node)
+                       continue;
+
+               info = pbias_matches[idx].driver_data;
+               if (!info)
+                       return -ENODEV;
+
+               res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+               if (!res)
+                       return -EINVAL;
+
+               drvdata[data_idx].pbias_reg = res->start;
+               drvdata[data_idx].syscon = syscon;
+               drvdata[data_idx].info = info;
+               drvdata[data_idx].desc.name = info->name;
+               drvdata[data_idx].desc.owner = THIS_MODULE;
+               drvdata[data_idx].desc.type = REGULATOR_VOLTAGE;
+               drvdata[data_idx].desc.ops = &pbias_regulator_voltage_ops;
+               drvdata[data_idx].desc.n_voltages = 2;
+               drvdata[data_idx].desc.enable_time = info->enable_time;
+
+               cfg.init_data = pbias_matches[idx].init_data;
+               cfg.driver_data = &drvdata[data_idx];
+               cfg.of_node = pbias_matches[idx].of_node;
+
+               drvdata[data_idx].dev = devm_regulator_register(&pdev->dev,
+                                       &drvdata[data_idx].desc, &cfg);
+               if (IS_ERR(drvdata[data_idx].dev)) {
+                       ret = PTR_ERR(drvdata[data_idx].dev);
+                       dev_err(&pdev->dev,
+                               "Failed to register regulator: %d\n", ret);
+                       goto err_regulator;
+               }
+               data_idx++;
+       }
+
+       platform_set_drvdata(pdev, drvdata);
+
+err_regulator:
+       return ret;
+}
+
+static struct platform_driver pbias_regulator_driver = {
+       .probe          = pbias_regulator_probe,
+       .driver         = {
+               .name           = "pbias-regulator",
+               .owner          = THIS_MODULE,
+               .of_match_table = of_match_ptr(pbias_of_match),
+       },
+};
+
+module_platform_driver(pbias_regulator_driver);
+
+MODULE_AUTHOR("Balaji T K <balajitk@ti.com>");
+MODULE_DESCRIPTION("pbias voltage regulator");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pbias-regulator");