thermal: rcar: fix ENR register value

On R-Mobile APE6, since it has 3 thermal zones, ENR register
has enable bits in bit 19-16, bit 11-8 and bit 3-0.

However, on R-Car gen2, since it has 1 thermal zone, ENR register has
enable bits in bit 3-0. (In other words, the write value should always
be 0 for bit 31-4 of ENR register.)

So, this patch fixes the ENR register value using I/O resource sets.

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 8803e693fe6868a620b76abda347e0e27645d6d3..2f3b4ff5b9d166db28b2b46432f2feb37f11b39b 100644 (file)
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -372,6 +372,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
        int i;
        int ret = -ENODEV;
        int idle = IDLE_INTERVAL;
+       u32 enr_bits = 0;
 
        common = devm_kzalloc(dev, sizeof(*common), GFP_KERNEL);
        if (!common)
@@ -408,9 +409,6 @@ static int rcar_thermal_probe(struct platform_device *pdev)
                if (IS_ERR(common->base))
                        return PTR_ERR(common->base);
 
-               /* enable temperature comparation */
-               rcar_thermal_common_write(common, ENR, 0x00030303);
-
                idle = 0; /* polling delay is not needed */
        }
 
@@ -452,8 +450,15 @@ static int rcar_thermal_probe(struct platform_device *pdev)
                        rcar_thermal_irq_enable(priv);
 
                list_move_tail(&priv->list, &common->head);
+
+               /* update ENR bits */
+               enr_bits |= 3 << (i * 8);
        }
 
+       /* enable temperature comparation */
+       if (irq)
+               rcar_thermal_common_write(common, ENR, enr_bits);
+
        platform_set_drvdata(pdev, common);
 
        dev_info(dev, "%d sensor probed\n", i);