/*
* RTC related functions
*/
+#include <linux/acpi.h>
#include <linux/bcd.h>
#include <linux/mc146818rtc.h>
#include <asm/time.h>
+#ifdef CONFIG_X86_32
+# define CMOS_YEARS_OFFS 1900
+/*
+ * This is a special lock that is owned by the CPU and holds the index
+ * register we are working with. It is required for NMI access to the
+ * CMOS/RTC registers. See include/asm-i386/mc146818rtc.h for details.
+ */
+volatile unsigned long cmos_lock = 0;
+EXPORT_SYMBOL(cmos_lock);
+#else
+/*
+ * x86-64 systems only exists since 2002.
+ * This will work up to Dec 31, 2100
+ */
+# define CMOS_YEARS_OFFS 2000
+#endif
+
+DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL(rtc_lock);
+
/*
* In order to set the CMOS clock precisely, set_rtc_mmss has to be
* called 500 ms after the second nowtime has started, because when
int real_seconds, real_minutes, cmos_minutes;
unsigned char save_control, save_freq_select;
- save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
+ /* tell the clock it's being set */
+ save_control = CMOS_READ(RTC_CONTROL);
CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
- save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
+ /* stop and reset prescaler */
+ save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
cmos_minutes = CMOS_READ(RTC_MINUTES);
*/
real_seconds = nowtime % 60;
real_minutes = nowtime / 60;
+ /* correct for half hour time zone */
if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
- real_minutes += 30; /* correct for half hour time zone */
+ real_minutes += 30;
real_minutes %= 60;
if (abs(real_minutes - cmos_minutes) < 30) {
unsigned long mach_get_cmos_time(void)
{
- unsigned int year, mon, day, hour, min, sec;
-
- do {
- sec = CMOS_READ(RTC_SECONDS);
- min = CMOS_READ(RTC_MINUTES);
- hour = CMOS_READ(RTC_HOURS);
- day = CMOS_READ(RTC_DAY_OF_MONTH);
- mon = CMOS_READ(RTC_MONTH);
- year = CMOS_READ(RTC_YEAR);
- } while (sec != CMOS_READ(RTC_SECONDS));
-
- if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+ unsigned int year, mon, day, hour, min, sec, century = 0;
+
+ /*
+ * If UIP is clear, then we have >= 244 microseconds before
+ * RTC registers will be updated. Spec sheet says that this
+ * is the reliable way to read RTC - registers. If UIP is set
+ * then the register access might be invalid.
+ */
+ while ((CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
+ cpu_relax();
+
+ sec = CMOS_READ(RTC_SECONDS);
+ min = CMOS_READ(RTC_MINUTES);
+ hour = CMOS_READ(RTC_HOURS);
+ day = CMOS_READ(RTC_DAY_OF_MONTH);
+ mon = CMOS_READ(RTC_MONTH);
+ year = CMOS_READ(RTC_YEAR);
+
+#if defined(CONFIG_ACPI) && defined(CONFIG_X86_64)
+ /* CHECKME: Is this really 64bit only ??? */
+ if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
+ acpi_gbl_FADT.century)
+ century = CMOS_READ(acpi_gbl_FADT.century);
+#endif
+
+ if (RTC_ALWAYS_BCD || !(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY)) {
BCD_TO_BIN(sec);
BCD_TO_BIN(min);
BCD_TO_BIN(hour);
BCD_TO_BIN(year);
}
- year += 1900;
- if (year < 1970)
- year += 100;
+ if (century) {
+ BCD_TO_BIN(century);
+ year += century * 100;
+ printk(KERN_INFO "Extended CMOS year: %d\n", century * 100);
+ } else {
+ year += CMOS_YEARS_OFFS;
+ if (year < 1970)
+ year += 100;
+ }
return mktime(year, mon, day, hour, min, sec);
}
-DEFINE_SPINLOCK(rtc_lock);
-EXPORT_SYMBOL(rtc_lock);
-
-/*
- * This is a special lock that is owned by the CPU and holds the index
- * register we are working with. It is required for NMI access to the
- * CMOS/RTC registers. See include/asm-i386/mc146818rtc.h for details.
- */
-volatile unsigned long cmos_lock = 0;
-EXPORT_SYMBOL(cmos_lock);
-
/* Routines for accessing the CMOS RAM/RTC. */
unsigned char rtc_cmos_read(unsigned char addr)
{
int retval;
unsigned long flags;
- /* gets recalled with irq locally disabled */
- /* XXX - does irqsave resolve this? -johnstul */
spin_lock_irqsave(&rtc_lock, flags);
retval = set_wallclock(nowtime);
spin_unlock_irqrestore(&rtc_lock, flags);
/* not static: needed by APM */
unsigned long read_persistent_clock(void)
{
- unsigned long retval;
- unsigned long flags;
+ unsigned long retval, flags;
spin_lock_irqsave(&rtc_lock, flags);
retval = get_wallclock();
#include <asm/nmi.h>
#include <asm/vgtod.h>
-DEFINE_SPINLOCK(rtc_lock);
-EXPORT_SYMBOL(rtc_lock);
-
volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES;
unsigned long profile_pc(struct pt_regs *regs)
}
EXPORT_SYMBOL(profile_pc);
-/* Routines for accessing the CMOS RAM/RTC. */
-unsigned char rtc_cmos_read(unsigned char addr)
-{
- unsigned char val;
- lock_cmos_prefix(addr);
- outb_p(addr, RTC_PORT(0));
- val = inb_p(RTC_PORT(1));
- lock_cmos_suffix(addr);
- return val;
-}
-EXPORT_SYMBOL(rtc_cmos_read);
-
-void rtc_cmos_write(unsigned char val, unsigned char addr)
-{
- lock_cmos_prefix(addr);
- outb_p(addr, RTC_PORT(0));
- outb_p(val, RTC_PORT(1));
- lock_cmos_suffix(addr);
-}
-EXPORT_SYMBOL(rtc_cmos_write);
-
-/*
- * In order to set the CMOS clock precisely, set_rtc_mmss has to be called 500
- * ms after the second nowtime has started, because when nowtime is written
- * into the registers of the CMOS clock, it will jump to the next second
- * precisely 500 ms later. Check the Motorola MC146818A or Dallas DS12887 data
- * sheet for details.
- */
-
-static int set_rtc_mmss(unsigned long nowtime)
-{
- int retval = 0;
- int real_seconds, real_minutes, cmos_minutes;
- unsigned char control, freq_select;
- unsigned long flags;
-
-/*
- * set_rtc_mmss is called when irqs are enabled, so disable irqs here
- */
- spin_lock_irqsave(&rtc_lock, flags);
-/*
- * Tell the clock it's being set and stop it.
- */
- control = CMOS_READ(RTC_CONTROL);
- CMOS_WRITE(control | RTC_SET, RTC_CONTROL);
-
- freq_select = CMOS_READ(RTC_FREQ_SELECT);
- CMOS_WRITE(freq_select | RTC_DIV_RESET2, RTC_FREQ_SELECT);
-
- cmos_minutes = CMOS_READ(RTC_MINUTES);
- BCD_TO_BIN(cmos_minutes);
-
-/*
- * since we're only adjusting minutes and seconds, don't interfere with hour
- * overflow. This avoids messing with unknown time zones but requires your RTC
- * not to be off by more than 15 minutes. Since we're calling it only when
- * our clock is externally synchronized using NTP, this shouldn't be a problem.
- */
-
- real_seconds = nowtime % 60;
- real_minutes = nowtime / 60;
- if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1)
- real_minutes += 30; /* correct for half hour time zone */
- real_minutes %= 60;
-
- if (abs(real_minutes - cmos_minutes) >= 30) {
- printk(KERN_WARNING "time.c: can't update CMOS clock "
- "from %d to %d\n", cmos_minutes, real_minutes);
- retval = -1;
- } else {
- BIN_TO_BCD(real_seconds);
- BIN_TO_BCD(real_minutes);
- CMOS_WRITE(real_seconds, RTC_SECONDS);
- CMOS_WRITE(real_minutes, RTC_MINUTES);
- }
-
-/*
- * The following flags have to be released exactly in this order, otherwise the
- * DS12887 (popular MC146818A clone with integrated battery and quartz) will
- * not reset the oscillator and will not update precisely 500 ms later. You
- * won't find this mentioned in the Dallas Semiconductor data sheets, but who
- * believes data sheets anyway ... -- Markus Kuhn
- */
-
- CMOS_WRITE(control, RTC_CONTROL);
- CMOS_WRITE(freq_select, RTC_FREQ_SELECT);
-
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- return retval;
-}
-
-int update_persistent_clock(struct timespec now)
-{
- return set_rtc_mmss(now.tv_sec);
-}
-
static irqreturn_t timer_event_interrupt(int irq, void *dev_id)
{
add_pda(irq0_irqs, 1);
return IRQ_HANDLED;
}
-unsigned long read_persistent_clock(void)
-{
- unsigned int year, mon, day, hour, min, sec;
- unsigned long flags;
- unsigned century = 0;
-
- spin_lock_irqsave(&rtc_lock, flags);
- /*
- * if UIP is clear, then we have >= 244 microseconds before RTC
- * registers will be updated. Spec sheet says that this is the
- * reliable way to read RTC - registers invalid (off bus) during update
- */
- while ((CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
- cpu_relax();
-
-
- /* now read all RTC registers while stable with interrupts disabled */
- sec = CMOS_READ(RTC_SECONDS);
- min = CMOS_READ(RTC_MINUTES);
- hour = CMOS_READ(RTC_HOURS);
- day = CMOS_READ(RTC_DAY_OF_MONTH);
- mon = CMOS_READ(RTC_MONTH);
- year = CMOS_READ(RTC_YEAR);
-#ifdef CONFIG_ACPI
- if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
- acpi_gbl_FADT.century)
- century = CMOS_READ(acpi_gbl_FADT.century);
-#endif
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- /*
- * We know that x86-64 always uses BCD format, no need to check the
- * config register.
- */
-
- BCD_TO_BIN(sec);
- BCD_TO_BIN(min);
- BCD_TO_BIN(hour);
- BCD_TO_BIN(day);
- BCD_TO_BIN(mon);
- BCD_TO_BIN(year);
-
- if (century) {
- BCD_TO_BIN(century);
- year += century * 100;
- printk(KERN_INFO "Extended CMOS year: %d\n", century * 100);
- } else {
- /*
- * x86-64 systems only exists since 2002.
- * This will work up to Dec 31, 2100
- */
- year += 2000;
- }
-
- return mktime(year, mon, day, hour, min, sec);
-}
-
/* calibrate_cpu is used on systems with fixed rate TSCs to determine
* processor frequency */
#define TICK_COUNT 100000000
projects / openwrt / staging / blogic.git / commitdiff