+++ /dev/null
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/mii.h>
-#include <linux/usb.h>
-#include <linux/usb/cdc.h>
-#include <linux/usb/usbnet.h>
-
-#define RTL815x_REQT_READ 0xc0
-#define RTL815x_REQT_WRITE 0x40
-#define RTL815x_REQ_GET_REGS 0x05
-#define RTL815x_REQ_SET_REGS 0x05
-
-#define MCU_TYPE_PLA 0x0100
-#define OCP_BASE 0xe86c
-#define BASE_MII 0xa400
-
-#define BYTE_EN_DWORD 0xff
-#define BYTE_EN_WORD 0x33
-#define BYTE_EN_BYTE 0x11
-
-#define R815x_PHY_ID 32
-#define REALTEK_VENDOR_ID 0x0bda
-
-
-static int pla_read_word(struct usb_device *udev, u16 index)
-{
- int ret;
- u8 shift = index & 2;
- __le32 *tmp;
-
- tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
- if (!tmp)
- return -ENOMEM;
-
- index &= ~3;
-
- ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
- RTL815x_REQ_GET_REGS, RTL815x_REQT_READ,
- index, MCU_TYPE_PLA, tmp, sizeof(*tmp), 500);
- if (ret < 0)
- goto out2;
-
- ret = __le32_to_cpu(*tmp);
- ret >>= (shift * 8);
- ret &= 0xffff;
-
-out2:
- kfree(tmp);
- return ret;
-}
-
-static int pla_write_word(struct usb_device *udev, u16 index, u32 data)
-{
- __le32 *tmp;
- u32 mask = 0xffff;
- u16 byen = BYTE_EN_WORD;
- u8 shift = index & 2;
- int ret;
-
- tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
- if (!tmp)
- return -ENOMEM;
-
- data &= mask;
-
- if (shift) {
- byen <<= shift;
- mask <<= (shift * 8);
- data <<= (shift * 8);
- index &= ~3;
- }
-
- ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
- RTL815x_REQ_GET_REGS, RTL815x_REQT_READ,
- index, MCU_TYPE_PLA, tmp, sizeof(*tmp), 500);
- if (ret < 0)
- goto out3;
-
- data |= __le32_to_cpu(*tmp) & ~mask;
- *tmp = __cpu_to_le32(data);
-
- ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- RTL815x_REQ_SET_REGS, RTL815x_REQT_WRITE,
- index, MCU_TYPE_PLA | byen, tmp, sizeof(*tmp),
- 500);
-
-out3:
- kfree(tmp);
- return ret;
-}
-
-static int ocp_reg_read(struct usbnet *dev, u16 addr)
-{
- u16 ocp_base, ocp_index;
- int ret;
-
- ocp_base = addr & 0xf000;
- ret = pla_write_word(dev->udev, OCP_BASE, ocp_base);
- if (ret < 0)
- goto out;
-
- ocp_index = (addr & 0x0fff) | 0xb000;
- ret = pla_read_word(dev->udev, ocp_index);
-
-out:
- return ret;
-}
-
-static int ocp_reg_write(struct usbnet *dev, u16 addr, u16 data)
-{
- u16 ocp_base, ocp_index;
- int ret;
-
- ocp_base = addr & 0xf000;
- ret = pla_write_word(dev->udev, OCP_BASE, ocp_base);
- if (ret < 0)
- goto out1;
-
- ocp_index = (addr & 0x0fff) | 0xb000;
- ret = pla_write_word(dev->udev, ocp_index, data);
-
-out1:
- return ret;
-}
-
-static int r815x_mdio_read(struct net_device *netdev, int phy_id, int reg)
-{
- struct usbnet *dev = netdev_priv(netdev);
- int ret;
-
- if (phy_id != R815x_PHY_ID)
- return -EINVAL;
-
- if (usb_autopm_get_interface(dev->intf) < 0)
- return -ENODEV;
-
- ret = ocp_reg_read(dev, BASE_MII + reg * 2);
-
- usb_autopm_put_interface(dev->intf);
- return ret;
-}
-
-static
-void r815x_mdio_write(struct net_device *netdev, int phy_id, int reg, int val)
-{
- struct usbnet *dev = netdev_priv(netdev);
-
- if (phy_id != R815x_PHY_ID)
- return;
-
- if (usb_autopm_get_interface(dev->intf) < 0)
- return;
-
- ocp_reg_write(dev, BASE_MII + reg * 2, val);
-
- usb_autopm_put_interface(dev->intf);
-}
-
-static int r8153_bind(struct usbnet *dev, struct usb_interface *intf)
-{
- int status;
-
- status = usbnet_cdc_bind(dev, intf);
- if (status < 0)
- return status;
-
- dev->mii.dev = dev->net;
- dev->mii.mdio_read = r815x_mdio_read;
- dev->mii.mdio_write = r815x_mdio_write;
- dev->mii.phy_id_mask = 0x3f;
- dev->mii.reg_num_mask = 0x1f;
- dev->mii.phy_id = R815x_PHY_ID;
- dev->mii.supports_gmii = 1;
-
- return status;
-}
-
-static int r8152_bind(struct usbnet *dev, struct usb_interface *intf)
-{
- int status;
-
- status = usbnet_cdc_bind(dev, intf);
- if (status < 0)
- return status;
-
- dev->mii.dev = dev->net;
- dev->mii.mdio_read = r815x_mdio_read;
- dev->mii.mdio_write = r815x_mdio_write;
- dev->mii.phy_id_mask = 0x3f;
- dev->mii.reg_num_mask = 0x1f;
- dev->mii.phy_id = R815x_PHY_ID;
- dev->mii.supports_gmii = 0;
-
- return status;
-}
-
-static const struct driver_info r8152_info = {
- .description = "RTL8152 ECM Device",
- .flags = FLAG_ETHER | FLAG_POINTTOPOINT,
- .bind = r8152_bind,
- .unbind = usbnet_cdc_unbind,
- .status = usbnet_cdc_status,
- .manage_power = usbnet_manage_power,
-};
-
-static const struct driver_info r8153_info = {
- .description = "RTL8153 ECM Device",
- .flags = FLAG_ETHER | FLAG_POINTTOPOINT,
- .bind = r8153_bind,
- .unbind = usbnet_cdc_unbind,
- .status = usbnet_cdc_status,
- .manage_power = usbnet_manage_power,
-};
-
-static const struct usb_device_id products[] = {
-{
- USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM,
- USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
- .driver_info = (unsigned long) &r8152_info,
-},
-
-{
- USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM,
- USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
- .driver_info = (unsigned long) &r8153_info,
-},
-
- { }, /* END */
-};
-MODULE_DEVICE_TABLE(usb, products);
-
-static struct usb_driver r815x_driver = {
- .name = "r815x",
- .id_table = products,
- .probe = usbnet_probe,
- .disconnect = usbnet_disconnect,
- .suspend = usbnet_suspend,
- .resume = usbnet_resume,
- .reset_resume = usbnet_resume,
- .supports_autosuspend = 1,
- .disable_hub_initiated_lpm = 1,
-};
-
-module_usb_driver(r815x_driver);
-
-MODULE_AUTHOR("Hayes Wang");
-MODULE_DESCRIPTION("Realtek USB ECM device");
-MODULE_LICENSE("GPL");
projects / openwrt / staging / blogic.git / commitdiff