ar71xx: add kernel support for Netgear WNDAP360

Here is corrected version (only thing not working are wifi LEDs).

[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]

Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36578

diff --git a/target/linux/ar71xx/config-3.8 b/target/linux/ar71xx/config-3.8
index 32393fb33d7a64f3cb0383d14d641f48b2776364..e25966b68fb2f3b5a2585e271c061df9699f82c9 100644 (file)
--- a/target/linux/ar71xx/config-3.8
+++ b/target/linux/ar71xx/config-3.8
@@ -82,6 +82,7 @@ CONFIG_ATH79_MACH_UBNT=y
 CONFIG_ATH79_MACH_UBNT_XM=y
 CONFIG_ATH79_MACH_WHR_HP_G300N=y
 CONFIG_ATH79_MACH_WLAE_AG300N=y
+CONFIG_ATH79_MACH_WNDAP360=y
 CONFIG_ATH79_MACH_WNDR3700=y
 CONFIG_ATH79_MACH_WNDR4300=y
 CONFIG_ATH79_MACH_WNR2000=y

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wndap360.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wndap360.c
new file mode 100644 (file)
index 0000000..3d8d6b0
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wndap360.c
@@ -0,0 +1,105 @@
+/*
+ *  Netgear WNDAP360 board support (proper leds / button support missing)
+ *
+ *  Based on AP96
+ *  Copyright (C) 2013 Jacek Kikiewicz
+ *  Copyright (C) 2009 Marco Porsch
+ *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2010 Atheros Communications
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define WNDAP360_GPIO_LED_POWER_ORANGE         0
+#define WNDAP360_GPIO_LED_POWER_GREEN          2
+
+/* Reset button - next to the power connector */
+#define WNDAP360_GPIO_BTN_RESET                3
+/* WPS button - next to a led on right */
+#define WNDAP360_GPIO_BTN_WPS          8
+
+#define WNDAP360_KEYS_POLL_INTERVAL            20      /* msecs */
+#define WNDAP360_KEYS_DEBOUNCE_INTERVAL        (3 * WNDAP360_KEYS_POLL_INTERVAL)
+
+#define WNDAP360_WMAC0_MAC_OFFSET              0x120c
+#define WNDAP360_WMAC1_MAC_OFFSET              0x520c
+#define WNDAP360_CALDATA0_OFFSET               0x1000
+#define WNDAP360_CALDATA1_OFFSET               0x5000
+
+/*
+ * WNDAP360 this still uses leds definitions from AP96
+ *
+ */
+static struct gpio_led wndap360_leds_gpio[] __initdata = {
+       {
+               .name           = "wndap360:green:power",
+               .gpio           = WNDAP360_GPIO_LED_POWER_GREEN,
+               .active_low     = 1,
+       }, {
+               .name           = "wndap360:orange:power",
+               .gpio           = WNDAP360_GPIO_LED_POWER_ORANGE,
+               .active_low     = 1,
+        }
+};
+
+static struct gpio_keys_button wndap360_gpio_keys[] __initdata = {
+       {
+               .desc           = "reset",
+               .type           = EV_KEY,
+               .code           = KEY_RESTART,
+               .debounce_interval = WNDAP360_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = WNDAP360_GPIO_BTN_RESET,
+               .active_low     = 1,
+       }
+};
+
+#define WNDAP360_LAN_PHYMASK 0x0f
+
+static void __init wndap360_setup(void)
+{
+       u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+       ath79_register_mdio(0, ~(WNDAP360_LAN_PHYMASK));
+
+       ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
+       ath79_eth0_pll_data.pll_1000 = 0x11110000;
+       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+       ath79_eth0_data.phy_mask = WNDAP360_LAN_PHYMASK;
+       ath79_eth0_data.speed = SPEED_1000;
+       ath79_eth0_data.duplex = DUPLEX_FULL;
+
+       ath79_register_eth(0);
+
+       ath79_register_usb();
+
+       ath79_register_m25p80(NULL);
+
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(wndap360_leds_gpio),
+                                       wndap360_leds_gpio);
+
+       ath79_register_gpio_keys_polled(-1, WNDAP360_KEYS_POLL_INTERVAL,
+                                        ARRAY_SIZE(wndap360_gpio_keys),
+                                        wndap360_gpio_keys);
+
+       ap94_pci_init(art + WNDAP360_CALDATA0_OFFSET,
+                     art + WNDAP360_WMAC0_MAC_OFFSET,
+                     art + WNDAP360_CALDATA1_OFFSET,
+                     art + WNDAP360_WMAC1_MAC_OFFSET);
+}
+
+MIPS_MACHINE(ATH79_MACH_WNDAP360, "WNDAP360", "Netgear WNDAP360", wndap360_setup);

diff --git a/target/linux/ar71xx/patches-3.8/619-MIPS-ath79-add-Netgear-WDNAP360-support.patch b/target/linux/ar71xx/patches-3.8/619-MIPS-ath79-add-Netgear-WDNAP360-support.patch
new file mode 100644 (file)
index 0000000..ba92ec6
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.8/619-MIPS-ath79-add-Netgear-WDNAP360-support.patch
@@ -0,0 +1,44 @@
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -117,6 +117,7 @@ enum ath79_mach_type {
+       ATH79_MACH_WHR_HP_G300N,        /* Buffalo WHR-HP-G300N */
+       ATH79_MACH_WHR_HP_GN,           /* Buffalo WHR-HP-GN */
+       ATH79_MACH_WLAE_AG300N,         /* Buffalo WLAE-AG300N */
++      ATH79_MACH_WNDAP360,            /* NETGEAR WNDAP360 */
+       ATH79_MACH_WNDR3700,            /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
+       ATH79_MACH_WNDR4300,            /* NETGEAR WNDR4300 */
+       ATH79_MACH_WNR2000,             /* NETGEAR WNR2000 */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -378,6 +378,16 @@ config ATH79_MACH_RB2011
+       select ATH79_DEV_WMAC
+       select ATH79_ROUTERBOOT
+ 
++config ATH79_MACH_WNDAP360
++      bool "NETGEAR WNDAP360 board support"
++      select SOC_AR71XX
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++
+ config ATH79_MACH_WNDR3700
+       bool "NETGEAR WNDR3700 board support"
+       select SOC_AR71XX
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -98,6 +98,7 @@ obj-$(CONFIG_ATH79_MACH_UBNT)                += mach-u
+ obj-$(CONFIG_ATH79_MACH_UBNT_XM)      += mach-ubnt-xm.o
+ obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
+ obj-$(CONFIG_ATH79_MACH_WLAE_AG300N)  += mach-wlae-ag300n.o
++obj-$(CONFIG_ATH79_MACH_WNDAP360)     += mach-wndap360.o
+ obj-$(CONFIG_ATH79_MACH_WNDR3700)     += mach-wndr3700.o
+ obj-$(CONFIG_ATH79_MACH_WNDR4300)     += mach-wndr4300.o
+ obj-$(CONFIG_ATH79_MACH_WNR2000)      += mach-wnr2000.o
+@@ -111,4 +112,3 @@ obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2)
+ obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H)        += mach-wzr-hp-ag300h.o
+ obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
+ obj-$(CONFIG_ATH79_MACH_ZCN_1523H)    += mach-zcn-1523h.o
+-