ramips: add button support and make LEDs known to userspace for DIR-860L B1

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Reviewed-by: Jo-Philipp Wich <jo@mein.io>

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 460253c9ff29ee55f1da4073555eab63e7affad6..0e30ba076dfed0dd60fe79aaa8b5984b8151dc3e 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -136,6 +136,9 @@ mzk-750dhp|\
 mzk-dp150n)
        ucidef_set_led_default "power" "power" "$board:green:power" "1"
        ;;
+dir-860l-b1)
+       ucidef_set_led_netdev "wan" "wan" "$board:green:net" "eth0.2"
+       ;;
 ex2700)
        ucidef_set_led_default "power_r" "POWER (red)" "$board:red:power" "0"
        set_wifi_led "$board:green:router"

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 0c5abb2861a5bad070afdd6b85eedc82e7dbd41e..e9d623d106733af5844881b5e5b9697248780357 100644 (file)
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -19,6 +19,7 @@ get_status_led() {
        asl26555|\
        br-6425|\
        br-6475nd|\
+       dir-860l-b1|\
        e1700|\
        fonera20n|\
        mzk-750dhp|\

diff --git a/target/linux/ramips/dts/DIR-860L-B1.dts b/target/linux/ramips/dts/DIR-860L-B1.dts
index b6336d87d355aa4d097f162324263fa3c44c8219..579df585c71a5a33de1c9fa2cd32599f588313cf 100644 (file)
--- a/target/linux/ramips/dts/DIR-860L-B1.dts
+++ b/target/linux/ramips/dts/DIR-860L-B1.dts
@@ -44,6 +44,18 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 7 1>;
+                       linux,code = <0x198>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 18 1>;
+                       linux,code = <0x211>;
+               };
        };
 };