+++ /dev/null
-commit be3de98aef65403129a4b714ddce8ab71f563209
-Author: Ash Benz <ash.benz@bk.ru>
-Date: Fri May 27 22:26:45 2016 +0800
-
- ipq806x/dts: Add Archer C2600 DTS
-
- Signed-off-by: Ash Benz <ash.benz@bk.ru>
-
-diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile
-index 52cc1fa..77391d0 100644
---- a/target/linux/ipq806x/image/Makefile
-+++ b/target/linux/ipq806x/image/Makefile
-@@ -36,11 +36,6 @@ define Build/append-dtb
- cat $(DTS_DIR)/$(DEVICE_DTS).dtb >> $@
- endef
-
--define Build/append-new-dtb
-- $(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb)
-- cat $@.dtb >> $@
--endef
--
- define Build/append-file
- cat $(1) >> $@
- endef
-@@ -95,7 +90,7 @@ define Device/TpSafeImage
- PROFILES += $$(DEVICE_NAME)
- FILESYSTEMS := squashfs
- KERNEL_SUFFIX := -uImage
-- KERNEL = kernel-bin | append-new-dtb | uImage none
-+ KERNEL = kernel-bin | append-dtb | uImage none
- KERNEL_NAME := zImage
- TPLINK_BOARD_NAME :=
- IMAGES := factory.bin sysupgrade.bin
-diff --git a/target/linux/ipq806x/patches-4.4/802-ARM-qcom-add-TPLink-C2600-device-tree.patch b/target/linux/ipq806x/patches-4.4/802-ARM-qcom-add-TPLink-C2600-device-tree.patch
-new file mode 100644
-index 0000000..8952f33
---- /dev/null
-+++ b/target/linux/ipq806x/patches-4.4/802-ARM-qcom-add-TPLink-C2600-device-tree.patch
-@@ -0,0 +1,425 @@
-+--- a/arch/arm/boot/dts/Makefile
-++++ b/arch/arm/boot/dts/Makefile
-+@@ -506,6 +506,7 @@
-+ qcom-apq8084-ifc6540.dtb \
-+ qcom-apq8084-mtp.dtb \
-+ qcom-ipq8064-ap148.dtb \
-++ qcom-ipq8064-c2600.dtb \
-+ qcom-ipq8064-db149.dtb \
-+ qcom-ipq8064-r7500.dtb \
-+ qcom-ipq8064-d7800.dtb \
-+--- /dev/null
-++++ b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
-+@@ -0,0 +1,412 @@
-++#include "qcom-ipq8064-v1.0.dtsi"
-++#include <dt-bindings/input/input.h>
-++
-++/ {
-++ model = "TP-Link Archer C2600";
-++ compatible = "tplink,c2600", "qcom,ipq8064";
-++
-++ memory@0 {
-++ reg = <0x42000000 0x1e000000>;
-++ device_type = "memory";
-++ };
-++
-++ reserved-memory {
-++ #address-cells = <1>;
-++ #size-cells = <1>;
-++ ranges;
-++ rsvd@41200000 {
-++ reg = <0x41200000 0x300000>;
-++ no-map;
-++ };
-++ };
-++
-++ aliases {
-++ serial0 = &uart4;
-++ mdio-gpio0 = &mdio0;
-++ };
-++
-++ chosen {
-++ linux,stdout-path = "serial0:115200n8";
-++ };
-++
-++ soc {
-++ pinmux@800000 {
-++ i2c4_pins: i2c4_pinmux {
-++ pins = "gpio12", "gpio13";
-++ function = "gsbi4";
-++ bias-disable;
-++ };
-++
-++ spi_pins: spi_pins {
-++ mux {
-++ pins = "gpio18", "gpio19", "gpio21";
-++ function = "gsbi5";
-++ drive-strength = <10>;
-++ bias-none;
-++ };
-++ };
-++
-++ nand_pins: nand_pins {
-++ mux {
-++ pins = "gpio34", "gpio35", "gpio36",
-++ "gpio37", "gpio38", "gpio39",
-++ "gpio40", "gpio41", "gpio42",
-++ "gpio43", "gpio44", "gpio45",
-++ "gpio46", "gpio47";
-++ function = "nand";
-++ drive-strength = <10>;
-++ bias-disable;
-++ };
-++
-++ pullups {
-++ pins = "gpio39";
-++ bias-pull-up;
-++ };
-++
-++ hold {
-++ pins = "gpio40", "gpio41", "gpio42",
-++ "gpio43", "gpio44", "gpio45",
-++ "gpio46", "gpio47";
-++ bias-bus-hold;
-++ };
-++ };
-++
-++ mdio0_pins: mdio0_pins {
-++ mux {
-++ pins = "gpio0", "gpio1";
-++ function = "gpio";
-++ drive-strength = <8>;
-++ bias-disable;
-++ };
-++ };
-++
-++ rgmii2_pins: rgmii2_pins {
-++ mux {
-++ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-++ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-++ function = "rgmii2";
-++ drive-strength = <8>;
-++ bias-disable;
-++ };
-++ };
-++ };
-++
-++ gsbi@16300000 {
-++ qcom,mode = <GSBI_PROT_I2C_UART>;
-++ status = "ok";
-++ serial@16340000 {
-++ status = "ok";
-++ };
-++ /*
-++ * The i2c device on gsbi4 should not be enabled.
-++ * On ipq806x designs gsbi4 i2c is meant for exclusive
-++ * RPM usage. Turning this on in kernel manifests as
-++ * i2c failure for the RPM.
-++ */
-++ };
-++
-++ gsbi5: gsbi@1a200000 {
-++ qcom,mode = <GSBI_PROT_SPI>;
-++ status = "ok";
-++
-++ spi4: spi@1a280000 {
-++ status = "ok";
-++ spi-max-frequency = <50000000>;
-++
-++ pinctrl-0 = <&spi_pins>;
-++ pinctrl-names = "default";
-++
-++ cs-gpios = <&qcom_pinmux 20 0>;
-++
-++ flash: m25p80@0 {
-++ compatible = "s25fl256s1";
-++ #address-cells = <1>;
-++ #size-cells = <1>;
-++ spi-max-frequency = <50000000>;
-++ reg = <0>;
-++
-++ SBL1@0 {
-++ label = "SBL1";
-++ reg = <0x0 0x20000>;
-++ read-only;
-++ };
-++ MIBIB@20000 {
-++ label = "MIBIB";
-++ reg = <0x20000 0x20000>;
-++ read-only;
-++ };
-++ SBL2@40000 {
-++ label = "SBL2";
-++ reg = <0x40000 0x20000>;
-++ read-only;
-++ };
-++ SBL3@60000 {
-++ label = "SBL3";
-++ reg = <0x60000 0x30000>;
-++ read-only;
-++ };
-++ DDRCONFIG@90000 {
-++ label = "DDRCONFIG";
-++ reg = <0x90000 0x10000>;
-++ read-only;
-++ };
-++ SSD@a0000 {
-++ label = "SSD";
-++ reg = <0xa0000 0x10000>;
-++ read-only;
-++ };
-++ TZ@b0000 {
-++ label = "TZ";
-++ reg = <0xb0000 0x30000>;
-++ read-only;
-++ };
-++ RPM@e0000 {
-++ label = "RPM";
-++ reg = <0xe0000 0x20000>;
-++ read-only;
-++ };
-++ fs-uboot@100000 {
-++ label = "fs-uboot";
-++ reg = <0x100000 0x70000>;
-++ read-only;
-++ };
-++ uboot-env@170000 {
-++ label = "uboot-env";
-++ reg = <0x170000 0x40000>;
-++ read-only;
-++ };
-++ radio@1b0000 {
-++ label = "radio";
-++ reg = <0x1b0000 0x40000>;
-++ read-only;
-++ };
-++ os-image@1f0000 {
-++ label = "os-image";
-++ reg = <0x1f0000 0x200000>;
-++ };
-++ rootfs@3f0000 {
-++ label = "rootfs";
-++ reg = <0x3f0000 0x1b00000>;
-++ };
-++ defaultmac: default-mac@1ef0000 {
-++ label = "default-mac";
-++ reg = <0x1ef0000 0x00200>;
-++ read-only;
-++ };
-++ pin@1ef0200 {
-++ label = "pin";
-++ reg = <0x1ef0200 0x00200>;
-++ read-only;
-++ };
-++ product-info@1ef0400 {
-++ label = "product-info";
-++ reg = <0x1ef0400 0x0fc00>;
-++ read-only;
-++ };
-++ partition-table@1f00000 {
-++ label = "partition-table";
-++ reg = <0x1f00000 0x10000>;
-++ read-only;
-++ };
-++ soft-version@1f10000 {
-++ label = "soft-version";
-++ reg = <0x1f10000 0x10000>;
-++ read-only;
-++ };
-++ support-list@1f20000 {
-++ label = "support-list";
-++ reg = <0x1f20000 0x10000>;
-++ read-only;
-++ };
-++ profile@1f30000 {
-++ label = "profile";
-++ reg = <0x1f30000 0x10000>;
-++ read-only;
-++ };
-++ default-config@1f40000 {
-++ label = "default-config";
-++ reg = <0x1f40000 0x10000>;
-++ read-only;
-++ };
-++ user-config@1f50000 {
-++ label = "user-config";
-++ reg = <0x1f50000 0x40000>;
-++ read-only;
-++ };
-++ qos-db@1f90000 {
-++ label = "qos-db";
-++ reg = <0x1f90000 0x40000>;
-++ read-only;
-++ };
-++ usb-config@1fd0000 {
-++ label = "usb-config";
-++ reg = <0x1fd0000 0x10000>;
-++ read-only;
-++ };
-++ log@1fe0000 {
-++ label = "log";
-++ reg = <0x1fe0000 0x20000>;
-++ read-only;
-++ };
-++ };
-++ };
-++ };
-++
-++ phy@100f8800 { /* USB3 port 1 HS phy */
-++ status = "ok";
-++ };
-++
-++ phy@100f8830 { /* USB3 port 1 SS phy */
-++ status = "ok";
-++ };
-++
-++ phy@110f8800 { /* USB3 port 0 HS phy */
-++ status = "ok";
-++ };
-++
-++ phy@110f8830 { /* USB3 port 0 SS phy */
-++ status = "ok";
-++ };
-++
-++ usb30@0 {
-++ status = "ok";
-++ };
-++
-++ usb30@1 {
-++ status = "ok";
-++ };
-++
-++ pcie0: pci@1b500000 {
-++ status = "ok";
-++ phy-tx0-term-offset = <7>;
-++ };
-++
-++ pcie1: pci@1b700000 {
-++ status = "ok";
-++ phy-tx0-term-offset = <7>;
-++ };
-++
-++ mdio0: mdio {
-++ compatible = "virtual,mdio-gpio";
-++ #address-cells = <1>;
-++ #size-cells = <0>;
-++ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
-++ pinctrl-0 = <&mdio0_pins>;
-++ pinctrl-names = "default";
-++
-++ phy0: ethernet-phy@0 {
-++ device_type = "ethernet-phy";
-++ reg = <0>;
-++ qca,ar8327-initvals = <
-++ 0x00004 0x7600000 /* PAD0_MODE */
-++ 0x00008 0x1000000 /* PAD5_MODE */
-++ 0x0000c 0x80 /* PAD6_MODE */
-++ 0x000e4 0xaa545 /* MAC_POWER_SEL */
-++ 0x000e0 0xc74164de /* SGMII_CTRL */
-++ 0x0007c 0x4e /* PORT0_STATUS */
-++ 0x00094 0x4e /* PORT6_STATUS */
-++ >;
-++ };
-++
-++ phy4: ethernet-phy@4 {
-++ device_type = "ethernet-phy";
-++ reg = <4>;
-++ };
-++ };
-++
-++ gmac1: ethernet@37200000 {
-++ status = "ok";
-++ phy-mode = "rgmii";
-++ qcom,id = <1>;
-++
-++ pinctrl-0 = <&rgmii2_pins>;
-++ pinctrl-names = "default";
-++
-++ mtd-mac-address = <&defaultmac 0x8>;
-++ mtd-mac-address-increment = <1>;
-++
-++ fixed-link {
-++ speed = <1000>;
-++ full-duplex;
-++ };
-++ };
-++
-++ gmac2: ethernet@37400000 {
-++ status = "ok";
-++ phy-mode = "sgmii";
-++ qcom,id = <2>;
-++
-++ mtd-mac-address = <&defaultmac 0x8>;
-++
-++ fixed-link {
-++ speed = <1000>;
-++ full-duplex;
-++ };
-++ };
-++ };
-++
-++ gpio-keys {
-++ compatible = "gpio-keys";
-++
-++ wifi {
-++ label = "wifi";
-++ gpios = <&qcom_pinmux 49 1>;
-++ linux,code = <KEY_WLAN>;
-++ };
-++
-++ reset {
-++ label = "reset";
-++ gpios = <&qcom_pinmux 64 1>;
-++ linux,code = <KEY_RESTART>;
-++ };
-++
-++ wps {
-++ label = "wps";
-++ gpios = <&qcom_pinmux 65 1>;
-++ linux,code = <KEY_WPS_BUTTON>;
-++ };
-++ ledgeneral {
-++ label = "ledgeneral";
-++ gpios = <&qcom_pinmux 16 1>;
-++ linux,code = <KEY_DOLLAR>;
-++ };
-++ };
-++
-++ gpio-leds {
-++ compatible = "gpio-leds";
-++
-++ lan {
-++ label = "lan:blue";
-++ gpios = <&qcom_pinmux 6 0>;
-++ };
-++ usb4 {
-++ label = "usb_4:blue";
-++ gpios = <&qcom_pinmux 7 0>;
-++ };
-++ usb2 {
-++ label = "usb_2:blue";
-++ gpios = <&qcom_pinmux 8 0>;
-++ };
-++ wps {
-++ label = "wps:blue";
-++ gpios = <&qcom_pinmux 9 0>;
-++ };
-++ wan_blue {
-++ label = "wan:blue";
-++ gpios = <&qcom_pinmux 33 1>;
-++ };
-++ status {
-++ label = "status:blue";
-++ gpios = <&qcom_pinmux 53 0>;
-++ default-state = "on";
-++ };
-++ ledgnr {
-++ label = "ledgnr:blue";
-++ gpios = <&qcom_pinmux 66 0>;
-++ };
-++ };
-++};
-++
-++&adm_dma {
-++ status = "ok";
-++};
projects / openwrt / staging / thess.git / commitdiff