The GL.iNet AR750S USB and microSD port is currently not working out of
the box. GPIO 7 is used to control the power of the USB port. Add GPIO
7 as a fixed-regulator for the port. Also add &usb1 to DTS to get the
microSD port to work.
Signed-off-by: Alexander Wördekemper <alexwoerde@web.de>
linux,default-trigger = "phy0tpt";
};
};
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+
+ gpio = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
&spi {
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
+ vbus-supply = <&usb_vbus>;
};
&usb_phy0 {
status = "okay";
};
+&usb1 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
&mdio0 {
status = "okay";
phy-mask = <0>;
define Device/glinet_gl-ar750s
ATH_SOC := qca9563
DEVICE_TITLE := GL.iNet GL-AR750S
- DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9887-ct
+ DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9887-ct block-mount
IMAGE_SIZE := 16000k
SUPPORTED_DEVICES += gl-ar750s
endef