-diff -uNr openssl-0.9.8j.ORIG/Makefile.org openssl-0.9.8j/Makefile.org
---- openssl-0.9.8j.ORIG/Makefile.org 2009-01-07 18:06:31.000000000 +0000
-+++ openssl-0.9.8j/Makefile.org 2009-01-07 18:08:38.000000000 +0000
-@@ -333,15 +333,15 @@
+--- a/Makefile.org
++++ b/Makefile.org
+@@ -333,15 +333,15 @@ build_crypto:
dir=crypto; target=all; $(BUILD_ONE_CMD)
build_fips:
@dir=fips; target=all; [ -z "$(FIPSCANLIB)" ] || $(BUILD_ONE_CMD)
-diff -ur openssl-0.9.8h.orig/Configure openssl-0.9.8h/Configure
---- openssl-0.9.8h.orig/Configure 2008-05-31 17:27:47.000000000 +0200
-+++ openssl-0.9.8h/Configure 2008-05-31 17:28:16.000000000 +0200
-@@ -357,6 +357,8 @@
+--- a/Configure
++++ b/Configure
+@@ -364,6 +364,8 @@ my %table=(
"linux-alpha+bwx-gcc","gcc:-O3 -DL_ENDIAN -DTERMIO::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
"linux-alpha-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::-D_REENTRANT:::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:${no_asm}",
"linux-alpha+bwx-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::-D_REENTRANT:::SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:${no_asm}",
-diff -burN openssl-0.9.8k/util/domd openssl-0.9.8k.patched/util/domd
---- openssl-0.9.8k/util/domd 2009-01-21 22:44:52.000000000 +0100
-+++ openssl-0.9.8k.patched/util/domd 2009-03-26 15:46:28.600347986 +0100
-@@ -14,7 +14,8 @@
+--- a/util/domd
++++ b/util/domd
+@@ -14,7 +14,8 @@ if [ "$MAKEDEPEND" = "" ]; then MAKEDEPE
cp Makefile Makefile.save
# fake the presence of Kerberos
touch $TOP/krb5.h
args=""
while [ $# -gt 0 ]; do
if [ "$1" != "--" ]; then args="$args $1"; fi
-@@ -22,7 +23,7 @@
+@@ -22,7 +23,7 @@ if [ "$MAKEDEPEND" = "gcc" ]; then
done
sed -e '/^# DO NOT DELETE.*/,$d' < Makefile > Makefile.tmp
echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' >> Makefile.tmp
-diff -burN openssl-0.9.8k/config openssl-0.9.8k.patched/config
---- openssl-0.9.8k/config 2009-02-16 09:43:41.000000000 +0100
-+++ openssl-0.9.8k.patched/config 2009-03-27 19:38:37.262255825 +0100
-@@ -399,8 +399,11 @@
+--- a/config
++++ b/config
+@@ -399,8 +399,11 @@ exit 0
# this is where the translation occurs into SSLeay terms
# ---------------------------------------------------------------------------
# then strip off whatever prefix egcs prepends the number with...
# Hopefully, this will work for any future prefixes as well.
GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
-@@ -409,6 +412,8 @@
+@@ -409,6 +412,8 @@ if [ "$GCCVER" != "" ]; then
# major and minor version numbers.
# peak single digit before and after first dot, e.g. 2.95.1 gives 29
GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
-Index: openssl-0.9.8e/Configure
-===================================================================
---- openssl-0.9.8e.orig/Configure 2007-06-04 13:23:32.217836040 +0200
-+++ openssl-0.9.8e/Configure 2007-06-04 13:23:32.598778128 +0200
+--- a/Configure
++++ b/Configure
@@ -1,4 +1,4 @@
-:
+#!/usr/bin/perl
eval 'exec perl -S $0 ${1+"$@"}'
if $running_under_some_shell;
##
-Index: openssl-0.9.8e/tools/c_rehash.in
-===================================================================
---- openssl-0.9.8e.orig/tools/c_rehash.in 2007-06-04 13:23:32.074857776 +0200
-+++ openssl-0.9.8e/tools/c_rehash.in 2007-06-04 13:23:32.598778128 +0200
+--- a/tools/c_rehash.in
++++ b/tools/c_rehash.in
@@ -1,4 +1,4 @@
-#!/usr/local/bin/perl
+#!/usr/bin/perl
# Perl c_rehash script, scan all files in a directory
-Index: openssl-0.9.8e/util/clean-depend.pl
-===================================================================
---- openssl-0.9.8e.orig/util/clean-depend.pl 2007-06-04 13:23:32.080856864 +0200
-+++ openssl-0.9.8e/util/clean-depend.pl 2007-06-04 13:23:32.598778128 +0200
+--- a/util/clean-depend.pl
++++ b/util/clean-depend.pl
@@ -1,4 +1,4 @@
-#!/usr/local/bin/perl -w
+#!/usr/bin/perl -w
# Clean the dependency list in a makefile of standard includes...
# Written by Ben Laurie <ben@algroup.co.uk> 19 Jan 1999
-Index: openssl-0.9.8e/util/mkdef.pl
-===================================================================
---- openssl-0.9.8e.orig/util/mkdef.pl 2007-06-04 13:23:32.085856104 +0200
-+++ openssl-0.9.8e/util/mkdef.pl 2007-06-04 13:23:32.599777976 +0200
+--- a/util/mkdef.pl
++++ b/util/mkdef.pl
@@ -1,4 +1,4 @@
-#!/usr/local/bin/perl -w
+#!/usr/bin/perl
#
# generate a .def file
#
-Index: openssl-0.9.8e/util/mkerr.pl
-===================================================================
---- openssl-0.9.8e.orig/util/mkerr.pl 2007-06-04 13:23:32.091855192 +0200
-+++ openssl-0.9.8e/util/mkerr.pl 2007-06-04 13:23:32.599777976 +0200
+--- a/util/mkerr.pl
++++ b/util/mkerr.pl
@@ -1,4 +1,4 @@
-#!/usr/local/bin/perl -w
+#!/usr/bin/perl
my $config = "crypto/err/openssl.ec";
my $debug = 0;
-Index: openssl-0.9.8e/util/mkstack.pl
-===================================================================
---- openssl-0.9.8e.orig/util/mkstack.pl 2007-06-04 13:23:32.096854432 +0200
-+++ openssl-0.9.8e/util/mkstack.pl 2007-06-04 13:23:32.600777824 +0200
+--- a/util/mkstack.pl
++++ b/util/mkstack.pl
@@ -1,4 +1,4 @@
-#!/usr/local/bin/perl -w
+#!/usr/bin/perl
# This is a utility that searches out "DECLARE_STACK_OF()"
# declarations in .h and .c files, and updates/creates/replaces
-Index: openssl-0.9.8e/util/pod2man.pl
-===================================================================
---- openssl-0.9.8e.orig/util/pod2man.pl 2007-06-04 13:23:32.102853520 +0200
-+++ openssl-0.9.8e/util/pod2man.pl 2007-06-04 13:23:32.600777824 +0200
+--- a/util/pod2man.pl
++++ b/util/pod2man.pl
@@ -1,4 +1,4 @@
-: #!/usr/bin/perl-5.005
+#!/usr/bin/perl
eval 'exec /usr/bin/perl -S $0 ${1+"$@"}'
if $running_under_some_shell;
-Index: openssl-0.9.8e/util/selftest.pl
-===================================================================
---- openssl-0.9.8e.orig/util/selftest.pl 2007-06-04 13:23:32.109852456 +0200
-+++ openssl-0.9.8e/util/selftest.pl 2007-06-04 13:23:32.600777824 +0200
+--- a/util/selftest.pl
++++ b/util/selftest.pl
@@ -1,4 +1,4 @@
-#!/usr/local/bin/perl -w
+#!/usr/bin/perl
---- openssl-0.9.8j/Makefile.org 2008-12-30 14:26:26.000000000 +0100
-+++ openssl-0.9.8j.patched/Makefile.org 2009-01-17 13:41:52.610868317 +0100
-@@ -131,7 +131,7 @@
+--- a/Makefile.org
++++ b/Makefile.org
+@@ -131,7 +131,7 @@ FIPSCANLIB=
BASEADDR=
-diff -ur openssl-0.9.8i.orig/Configure openssl-0.9.8i/Configure
---- openssl-0.9.8i.orig/Configure 2008-05-31 17:31:04.000000000 +0200
-+++ openssl-0.9.8i/Configure 2008-05-31 17:30:47.000000000 +0200
-@@ -1714,6 +1714,11 @@
+--- a/Configure
++++ b/Configure
+@@ -1850,6 +1850,11 @@ EOF
close(OUT);
}
print <<EOF;
Configured for $target.
-diff -ur openssl-0.9.8i.orig/util/libeay.num openssl-0.9.8i/util/libeay.num
---- openssl-0.9.8i.orig/util/libeay.num 2008-05-31 17:27:46.000000000 +0200
-+++ openssl-0.9.8i/util/libeay.num 2008-05-31 17:30:47.000000000 +0200
-@@ -2071,7 +2071,6 @@
+--- a/util/libeay.num
++++ b/util/libeay.num
+@@ -2071,7 +2071,6 @@ PKCS7_ATTR_SIGN_it
UI_add_error_string 2633 EXIST::FUNCTION:
KRB5_CHECKSUM_free 2634 EXIST::FUNCTION:
OCSP_REQUEST_get_ext 2635 EXIST::FUNCTION:
ENGINE_register_all_digests 2637 EXIST::FUNCTION:ENGINE
PKEY_USAGE_PERIOD_it 2638 EXIST:!EXPORT_VAR_AS_FUNCTION:VARIABLE:
PKEY_USAGE_PERIOD_it 2638 EXIST:EXPORT_VAR_AS_FUNCTION:FUNCTION:
-@@ -2545,7 +2544,6 @@
+@@ -2545,7 +2544,6 @@ OCSP_RESPONSE_new
AES_set_encrypt_key 3024 EXIST::FUNCTION:AES
OCSP_resp_count 3025 EXIST::FUNCTION:
KRB5_CHECKSUM_new 3026 EXIST::FUNCTION:
OCSP_onereq_get0_id 3028 EXIST::FUNCTION:
ENGINE_set_default_ciphers 3029 EXIST::FUNCTION:ENGINE
NOTICEREF_it 3030 EXIST:!EXPORT_VAR_AS_FUNCTION:VARIABLE:
-@@ -2576,7 +2574,6 @@
+@@ -2576,7 +2574,6 @@ ASN1_primitive_free
i2d_EXTENDED_KEY_USAGE 3052 EXIST::FUNCTION:
i2d_OCSP_SIGNATURE 3053 EXIST::FUNCTION:
asn1_enc_save 3054 EXIST::FUNCTION:
_ossl_old_des_pcbc_encrypt 3056 EXIST::FUNCTION:DES
PKCS12_MAC_DATA_it 3057 EXIST:!EXPORT_VAR_AS_FUNCTION:VARIABLE:
PKCS12_MAC_DATA_it 3057 EXIST:EXPORT_VAR_AS_FUNCTION:FUNCTION:
-@@ -2600,7 +2597,6 @@
+@@ -2600,7 +2597,6 @@ asn1_get_choice_selector
i2d_KRB5_CHECKSUM 3072 EXIST::FUNCTION:
ENGINE_set_table_flags 3073 EXIST::FUNCTION:ENGINE
AES_options 3074 EXIST::FUNCTION:AES
OCSP_id_cmp 3076 EXIST::FUNCTION:
OCSP_BASICRESP_new 3077 EXIST::FUNCTION:
OCSP_REQUEST_get_ext_by_NID 3078 EXIST::FUNCTION:
-@@ -2667,7 +2663,6 @@
+@@ -2667,7 +2663,6 @@ OCSP_CRLID_it
OCSP_CRLID_it 3127 EXIST:EXPORT_VAR_AS_FUNCTION:FUNCTION:
i2d_KRB5_AUTHENTBODY 3128 EXIST::FUNCTION:
OCSP_REQUEST_get_ext_count 3129 EXIST::FUNCTION:
X509_NAME_it 3131 EXIST:!EXPORT_VAR_AS_FUNCTION:VARIABLE:
X509_NAME_it 3131 EXIST:EXPORT_VAR_AS_FUNCTION:FUNCTION:
USERNOTICE_it 3132 EXIST:!EXPORT_VAR_AS_FUNCTION:VARIABLE:
-@@ -2762,8 +2757,6 @@
+@@ -2762,8 +2757,6 @@ DES_read_2passwords
DES_read_password 3207 EXIST::FUNCTION:DES
UI_UTIL_read_pw 3208 EXIST::FUNCTION:
UI_UTIL_read_pw_string 3209 EXIST::FUNCTION:
OPENSSL_add_all_algorithms_noconf 3212 EXIST:!VMS:FUNCTION:
OPENSSL_add_all_algo_noconf 3212 EXIST:VMS:FUNCTION:
OPENSSL_add_all_algorithms_conf 3213 EXIST:!VMS:FUNCTION:
-@@ -2772,7 +2765,6 @@
+@@ -2772,7 +2765,6 @@ OPENSSL_load_builtin_modules
AES_ofb128_encrypt 3215 EXIST::FUNCTION:AES
AES_ctr128_encrypt 3216 EXIST::FUNCTION:AES
AES_cfb128_encrypt 3217 EXIST::FUNCTION:AES
_ossl_096_des_random_seed 3219 EXIST::FUNCTION:DES
EVP_aes_256_ofb 3220 EXIST::FUNCTION:AES
EVP_aes_192_ofb 3221 EXIST::FUNCTION:AES
-@@ -3107,7 +3099,6 @@
+@@ -3107,7 +3099,6 @@ EC_GFp_nist_method
STORE_method_set_modify_function 3530 EXIST:!VMS:FUNCTION:
STORE_meth_set_modify_fn 3530 EXIST:VMS:FUNCTION:
STORE_parse_attrs_next 3531 EXIST::FUNCTION:
-diff -burN openssl-0.9.8k/Makefile openssl-0.9.8k.patched/Makefile
---- openssl-0.9.8k/Makefile 2009-03-25 14:11:43.000000000 +0100
-+++ openssl-0.9.8k.patched/Makefile 2009-03-26 15:28:35.483566078 +0100
-@@ -133,7 +133,7 @@
+--- a/Makefile
++++ b/Makefile
+@@ -133,7 +133,7 @@ FIPSCANLIB=
BASEADDR=0xFB00000
SHLIBDIRS= crypto ssl
# dirs in crypto to build
-@@ -150,7 +150,7 @@
+@@ -150,7 +150,7 @@ SDIRS= \
# tests to perform. "alltests" is a special word indicating that all tests
# should be performed.
MAKEFILE= Makefile
-@@ -162,7 +162,7 @@
+@@ -162,7 +162,7 @@ SHELL=/bin/sh
TOP= .
ONEDIRS=out tmp
WDIRS= windows
LIBS= libcrypto.a libssl.a
SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
-@@ -321,7 +321,7 @@
+@@ -321,7 +321,7 @@ FIPS_EX_OBJ= ../crypto/aes/aes_cfb.o \
../crypto/uid.o
sub_all: build_all
build_libs: build_crypto build_fips build_ssl build_shared build_engines
-@@ -613,7 +613,7 @@
+@@ -613,7 +613,7 @@ dist:
dist_pem_h:
(cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean)
install_sw:
@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
-diff -burN openssl-0.9.8k/Makefile.org openssl-0.9.8k.patched/Makefile.org
---- openssl-0.9.8k/Makefile.org 2009-03-03 23:40:29.000000000 +0100
-+++ openssl-0.9.8k.patched/Makefile.org 2009-03-26 15:29:05.243750064 +0100
-@@ -611,7 +611,7 @@
+--- a/Makefile.org
++++ b/Makefile.org
+@@ -611,7 +611,7 @@ dist:
dist_pem_h:
(cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean)
---- openssl-0.9.8k/Makefile.org 2009-04-06 13:52:21.000000000 +0200
-+++ openssl-0.9.8k.patched/Makefile.org 2009-04-06 13:54:04.000000000 +0200
-@@ -357,7 +357,7 @@
+--- a/Makefile.org
++++ b/Makefile.org
+@@ -357,7 +357,7 @@ libcrypto$(SHLIB_EXT): libcrypto.a $(SHA
$(AR) libcrypto.a fips/fipscanister.o ; \
else \
if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
export CC FIPSLD_CC; \
fi; \
$(MAKE) -e SHLIBDIRS='crypto' build-shared; \
-@@ -380,7 +380,7 @@
+@@ -380,7 +380,7 @@ libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT
fips/fipscanister.o: build_fips
libfips$(SHLIB_EXT): fips/fipscanister.o
@if [ "$(SHLIB_TARGET)" != "" ]; then \
$(MAKE) -f Makefile.shared -e $(BUILDENV) \
CC=$${CC} LIBNAME=fips THIS=$@ \
LIBEXTRAS=fips/fipscanister.o \
---- openssl-0.9.8k/apps/Makefile 2009-04-06 22:07:06.000000000 +0200
-+++ openssl-0.9.8k.patched/apps/Makefile 2009-04-06 22:12:39.000000000 +0200
-@@ -153,7 +153,7 @@
+--- a/apps/Makefile
++++ b/apps/Makefile
+@@ -153,12 +153,12 @@ $(EXE): progs.h $(E_OBJ) $(PROGRAM).o $(
shlib_target=; if [ -n "$(SHARED_LIBS)" ]; then \
shlib_target="$(SHLIB_TARGET)"; \
elif [ -n "$(FIPSCANLIB)" ]; then \
fi; \
LIBRARIES="$(LIBSSL) $(LIBKRB5) $(LIBCRYPTO)" ; \
[ "x$(FIPSCANLIB)" = "xlibfips" ] && LIBRARIES="$$LIBRARIES -lfips"; \
-@@ -158,7 +158,7 @@
- LIBRARIES="$(LIBSSL) $(LIBKRB5) $(LIBCRYPTO)" ; \
- [ "x$(FIPSCANLIB)" = "xlibfips" ] && LIBRARIES="$$LIBRARIES -lfips"; \
$(MAKE) -f $(TOP)/Makefile.shared -e \
- CC=$${CC} APPNAME=$(EXE) OBJECTS="$(PROGRAM).o $(E_OBJ)" \
+ CC="$${CC}" APPNAME=$(EXE) OBJECTS="$(PROGRAM).o $(E_OBJ)" \
-Index: openssl-0.9.8e/util/domd
-===================================================================
---- openssl-0.9.8e.orig/util/domd 2007-06-04 13:23:32.408807008 +0200
-+++ openssl-0.9.8e/util/domd 2007-06-04 13:23:33.442649840 +0200
+--- a/util/domd
++++ b/util/domd
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/usr/bin/env bash
--- a/Configure
+++ b/Configure
-@@ -34,6 +34,8 @@ my $usage="Usage: Configure [no-<cipher>
+@@ -36,6 +36,8 @@ my $usage="Usage: Configure [no-<cipher>
# (Default: KRB5_DIR/include)
# --with-krb5-flavor Declare what flavor of Kerberos 5 is used. Currently
# supported values are "MIT" and "Heimdal". A value is required.
#
# --test-sanity Make a number of sanity checks on the data in this file.
# This is a debugging tool for OpenSSL developers.
-@@ -540,6 +542,9 @@ my %table=(
+@@ -547,6 +549,9 @@ my %table=(
##### Compaq Non-Stop Kernel (Tandem)
"tandem-c89","c89:-Ww -D__TANDEM -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED=1 -D_TANDEM_SOURCE -DB_ENDIAN::(unknown):::THIRTY_TWO_BIT:::",
);
my @MK1MF_Builds=qw(VC-WIN64I VC-WIN64A
-@@ -589,6 +594,8 @@ my $montasm=1; # but "no-montasm" is d
+@@ -601,6 +606,8 @@ my $montasm=1; # but "no-montasm" is d
my $no_asm=0;
my $no_dso=0;
my $no_gmp=0;
my @skip=();
my $Makefile="Makefile";
my $des_locl="crypto/des/des_locl.h";
-@@ -716,6 +723,14 @@ PROCESS_ARGS:
+@@ -749,6 +756,14 @@ PROCESS_ARGS:
{
exit(&test_sanity());
}
elsif (/^reconfigure/ || /^reconf/)
{
if (open(IN,"<$Makefile"))
-@@ -924,6 +939,7 @@ foreach (sort (keys %disabled))
+@@ -1037,6 +1052,7 @@ foreach (sort (keys %disabled))
print " OPENSSL_NO_$ALGO";
if (/^err$/) { $flags .= "-DOPENSSL_NO_ERR "; }
elsif (/^asm$/) { $no_asm = 1; }
}
else
-@@ -1064,6 +1080,16 @@ if (!$no_krb5)
+@@ -1161,6 +1177,16 @@ if (!$no_krb5)
$withargs{"krb5-dir"} ne "";
}
----------------------
--- a/Makefile.org
+++ b/Makefile.org
-@@ -367,7 +367,7 @@ files:
+@@ -502,7 +502,7 @@ files:
links:
@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
- @$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
+ @$(PERL) $(TOP)/util/mklink.pl include/openssl $(HEADER) $(EXHEADER)
@set -e; target=links; $(RECURSIVE_BUILD_CMD)
-
- gentests:
+ @if [ -z "$(FIPSCANLIB)" ]; then \
+ set -e; target=links; dir=fips ; $(BUILD_CMD) ; \
--- a/Makefile.shared
+++ b/Makefile.shared
@@ -6,13 +6,13 @@
- CC=cc
+ CC="${CC:-cc}"
fi
- GCCVER=${GCCVER:-0}
- if [ "$SYSTEM" = "HP-UX" ];then
-@@ -482,6 +482,9 @@ echo Operating system: $GUESSOS
+
+ # Only set CC if not supplied already
+@@ -493,6 +493,9 @@ echo Operating system: $GUESSOS
# script above so we end up with values in vars but that would take
# more time that I want to waste at the moment
case "$GUESSOS" in
results[alg][run_no]=((double)count)/time_used*lengths[run_no];
}
-@@ -2806,29 +2928,11 @@ static int do_multi(int multi)
+@@ -2808,29 +2930,11 @@ static int do_multi(int multi)
p=buf+3;
alg=atoi(sstrsep(&p,sep));
sstrsep(&p,sep);
}
else if(!strncmp(buf,"+F2:",4))
{
-@@ -2839,12 +2943,18 @@ static int do_multi(int multi)
+@@ -2841,12 +2945,18 @@ static int do_multi(int multi)
k=atoi(sstrsep(&p,sep));
sstrsep(&p,sep);
d=atof(sstrsep(&p,sep));
if(n)
rsa_results[k][1]=1/(1/rsa_results[k][1]+1/d);
-@@ -2860,12 +2970,18 @@ static int do_multi(int multi)
+@@ -2862,12 +2972,18 @@ static int do_multi(int multi)
k=atoi(sstrsep(&p,sep));
sstrsep(&p,sep);
-diff -urN openssl-0.9.8h.orig/Configure openssl-0.9.8h/Configure
---- openssl-0.9.8h.orig/Configure 2008-05-02 01:11:30.000000000 +0200
-+++ openssl-0.9.8h/Configure 2008-06-19 13:27:42.000000000 +0200
-@@ -389,6 +389,10 @@
+--- a/Configure
++++ b/Configure
+@@ -396,6 +396,10 @@ my %table=(
"qnx4", "cc:-DL_ENDIAN -DTERMIO::(unknown):::${x86_gcc_des} ${x86_gcc_opts}:",
"qnx6", "cc:-DL_ENDIAN -DTERMIOS::(unknown)::-lsocket:${x86_gcc_des} ${x86_gcc_opts}:",
aes-ia64.s: asm/aes-ia64.S
$(CC) $(CFLAGS) -E asm/aes-ia64.S > $@
-
http://rt.openssl.org/Ticket/Display.html?id=1931&user=guest&pass=guest
-Index: openssl/crypto/pqueue/pqueue.c
-RCS File: /v/openssl/cvs/openssl/crypto/pqueue/pqueue.c,v
-rcsdiff -q -kk '-r1.2.2.4' '-r1.2.2.5' -u '/v/openssl/cvs/openssl/crypto/pqueue/pqueue.c,v' 2>/dev/null
---- pqueue.c 2005/06/28 12:53:33 1.2.2.4
-+++ pqueue.c 2009/05/16 16:18:44 1.2.2.5
-@@ -234,3 +234,17 @@
+--- a/crypto/pqueue/pqueue.c
++++ b/crypto/pqueue/pqueue.c
+@@ -234,3 +234,17 @@ pqueue_next(pitem **item)
return ret;
}
+ }
+ return count;
+}
-Index: openssl/crypto/pqueue/pqueue.h
-RCS File: /v/openssl/cvs/openssl/crypto/pqueue/pqueue.h,v
-rcsdiff -q -kk '-r1.2.2.1' '-r1.2.2.2' -u '/v/openssl/cvs/openssl/crypto/pqueue/pqueue.h,v' 2>/dev/null
---- pqueue.h 2005/05/30 22:34:27 1.2.2.1
-+++ pqueue.h 2009/05/16 16:18:44 1.2.2.2
-@@ -91,5 +91,6 @@
+--- a/crypto/pqueue/pqueue.h
++++ b/crypto/pqueue/pqueue.h
+@@ -91,5 +91,6 @@ pitem *pqueue_iterator(pqueue pq);
pitem *pqueue_next(piterator *iter);
void pqueue_print(pqueue pq);
+int pqueue_size(pqueue pq);
#endif /* ! HEADER_PQUEUE_H */
-Index: openssl/ssl/d1_pkt.c
-RCS File: /v/openssl/cvs/openssl/ssl/d1_pkt.c,v
-rcsdiff -q -kk '-r1.4.2.17' '-r1.4.2.18' -u '/v/openssl/cvs/openssl/ssl/d1_pkt.c,v' 2>/dev/null
---- d1_pkt.c 2009/05/16 15:51:59 1.4.2.17
-+++ d1_pkt.c 2009/05/16 16:18:45 1.4.2.18
-@@ -167,6 +167,10 @@
+--- a/ssl/d1_pkt.c
++++ b/ssl/d1_pkt.c
+@@ -167,6 +167,10 @@ dtls1_buffer_record(SSL *s, record_pqueu
DTLS1_RECORD_DATA *rdata;
pitem *item;
http://rt.openssl.org/Ticket/Display.html?id=1931&user=guest&pass=guest
-Index: openssl/ssl/d1_both.c
-===================================================================
---- d1_both.c.orig
-+++ d1_both.c
+--- a/ssl/d1_both.c
++++ b/ssl/d1_both.c
@@ -561,7 +561,16 @@ dtls1_process_out_of_seq_message(SSL *s,
if ((msg_hdr->frag_off+frag_len) > msg_hdr->msg_len)
goto err;
-Index: openssl/ssl/d1_both.c
-RCS File: /v/openssl/cvs/openssl/ssl/d1_both.c,v
-rcsdiff -q -kk '-r1.14.2.6' '-r1.14.2.7' -u '/v/openssl/cvs/openssl/ssl/d1_both.c,v' 2>/dev/null
---- d1_both.c 2009/04/22 12:17:02 1.14.2.6
-+++ d1_both.c 2009/05/13 11:51:30 1.14.2.7
-@@ -519,6 +519,7 @@
+--- a/ssl/d1_both.c
++++ b/ssl/d1_both.c
+@@ -519,6 +519,7 @@ dtls1_retrieve_buffered_fragment(SSL *s,
if ( s->d1->handshake_read_seq == frag->msg_header.seq)
{
pqueue_pop(s->d1->buffered_messages);
al=dtls1_preprocess_fragment(s,&frag->msg_header,max);
-@@ -536,7 +537,7 @@
+@@ -536,7 +537,7 @@ dtls1_retrieve_buffered_fragment(SSL *s,
if (al==0)
{
*ok = 1;
-diff -burN openssl-0.9.8l/Configure.rej openssl-0.9.8l.patched/Configure.rej
---- openssl-0.9.8l/Configure.rej 2009-11-05 13:07:06.000000000 +0100
-+++ openssl-0.9.8l.patched/Configure.rej 1970-01-01 01:00:00.000000000 +0100
+--- a/Configure.rej
++++ /dev/null
@@ -1,16 +0,0 @@
-***************
-*** 162,167 ****
projects / openwrt / staging / ansuel.git / commitdiff