Use the standard pr_<level> functions eases grep a bit.
Added a few missing terminating newlines to messages.
Coalesced long formats.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/sched.h>
#include <linux/wait.h>
#include <linux/slab.h>
sme->ssid, sme->ssid_len,
WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
if (!bss) {
- lbs_pr_err("assoc: bss %pM not in scan results\n",
- sme->bssid);
+ pr_err("assoc: bss %pM not in scan results\n", sme->bssid);
ret = -ENOENT;
goto done;
}
lbs_enable_rsn(priv, sme->crypto.cipher_group != 0);
break;
default:
- lbs_pr_err("unsupported cipher group 0x%x\n",
- sme->crypto.cipher_group);
+ pr_err("unsupported cipher group 0x%x\n",
+ sme->crypto.cipher_group);
ret = -ENOTSUPP;
goto done;
}
params->key, params->key_len);
break;
default:
- lbs_pr_err("unhandled cipher 0x%x\n", params->cipher);
+ pr_err("unhandled cipher 0x%x\n", params->cipher);
ret = -ENOTSUPP;
break;
}
ret = wiphy_register(wdev->wiphy);
if (ret < 0)
- lbs_pr_err("cannot register wiphy device\n");
+ pr_err("cannot register wiphy device\n");
priv->wiphy_registered = true;
ret = register_netdev(priv->dev);
if (ret)
- lbs_pr_err("cannot register network device\n");
+ pr_err("cannot register network device\n");
INIT_DELAYED_WORK(&priv->scan_work, lbs_scan_worker);
* It prepares command and sends it to firmware when it is ready.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kfifo.h>
#include <linux/sched.h>
#include <linux/slab.h>
* CF card firmware 5.0.16p0: cap 0x00000303
* USB dongle firmware 5.110.17p2: cap 0x00000303
*/
- lbs_pr_info("%pM, fw %u.%u.%up%u, cap 0x%08x\n",
+ pr_info("%pM, fw %u.%u.%up%u, cap 0x%08x\n",
cmd.permanentaddr,
priv->fwrelease >> 24 & 0xff,
priv->fwrelease >> 16 & 0xff,
/* if it's unidentified region code, use the default (USA) */
if (i >= MRVDRV_MAX_REGION_CODE) {
priv->regioncode = 0x10;
- lbs_pr_info("unidentified region code; using the default (USA)\n");
+ pr_info("unidentified region code; using the default (USA)\n");
}
if (priv->current_addr[0] == 0xff)
(uint8_t *)&cmd_config.wol_conf,
sizeof(struct wol_config));
} else {
- lbs_pr_info("HOST_SLEEP_CFG failed %d\n", ret);
+ pr_info("HOST_SLEEP_CFG failed %d\n", ret);
}
return ret;
if (priv->is_deep_sleep) {
if (!wait_event_interruptible_timeout(priv->ds_awake_q,
!priv->is_deep_sleep, (10 * HZ))) {
- lbs_pr_err("ds_awake_q: timer expired\n");
+ pr_err("ds_awake_q: timer expired\n");
ret = -1;
}
}
netif_carrier_off(priv->dev);
}
} else {
- lbs_pr_err("deep sleep: already enabled\n");
+ pr_err("deep sleep: already enabled\n");
}
} else {
if (priv->is_deep_sleep) {
if (!ret) {
ret = lbs_wait_for_ds_awake(priv);
if (ret)
- lbs_pr_err("deep sleep: wakeup"
- "failed\n");
+ pr_err("deep sleep: wakeup failed\n");
}
}
}
ret = lbs_host_sleep_cfg(priv, priv->wol_criteria,
(struct wol_config *)NULL);
if (ret) {
- lbs_pr_info("Host sleep configuration failed: "
- "%d\n", ret);
+ pr_info("Host sleep configuration failed: %d\n",
+ ret);
return ret;
}
if (priv->psstate == PS_STATE_FULL_POWER) {
sizeof(cmd),
lbs_ret_host_sleep_activate, 0);
if (ret)
- lbs_pr_info("HOST_SLEEP_ACTIVATE "
- "failed: %d\n", ret);
+ pr_info("HOST_SLEEP_ACTIVATE failed: %d\n",
+ ret);
}
if (!wait_event_interruptible_timeout(
priv->host_sleep_q,
priv->is_host_sleep_activated,
(10 * HZ))) {
- lbs_pr_err("host_sleep_q: timer expired\n");
+ pr_err("host_sleep_q: timer expired\n");
ret = -1;
}
} else {
- lbs_pr_err("host sleep: already enabled\n");
+ pr_err("host sleep: already enabled\n");
}
} else {
if (priv->is_host_sleep_activated)
ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) cmd, cmdsize);
if (ret) {
- lbs_pr_info("DNLD_CMD: hw_host_to_card failed: %d\n", ret);
+ pr_info("DNLD_CMD: hw_host_to_card failed: %d\n", ret);
/* Let the timer kick in and retry, and potentially reset
the whole thing if the condition persists */
timeo = HZ/4;
spin_lock_irqsave(&priv->driver_lock, flags);
if (priv->cur_cmd) {
- lbs_pr_alert( "EXEC_NEXT_CMD: already processing command!\n");
+ pr_alert( "EXEC_NEXT_CMD: already processing command!\n");
spin_unlock_irqrestore(&priv->driver_lock, flags);
ret = -1;
goto done;
ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) &confirm_sleep,
sizeof(confirm_sleep));
if (ret) {
- lbs_pr_alert("confirm_sleep failed\n");
+ pr_alert("confirm_sleep failed\n");
goto out;
}
spin_lock_irqsave(&priv->driver_lock, flags);
ret = cmdnode->result;
if (ret)
- lbs_pr_info("PREP_CMD: command 0x%04x failed: %d\n",
- command, ret);
+ pr_info("PREP_CMD: command 0x%04x failed: %d\n", command, ret);
__lbs_cleanup_and_insert_cmd(priv, cmdnode);
spin_unlock_irqrestore(&priv->driver_lock, flags);
* This file contains the handling of command
* responses as well as events generated by firmware.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/sched.h>
lbs_deb_hex(LBS_DEB_CMD, "CMD_RESP", (void *) resp, len);
if (resp->seqnum != priv->cur_cmd->cmdbuf->seqnum) {
- lbs_pr_info("Received CMD_RESP with invalid sequence %d (expected %d)\n",
- le16_to_cpu(resp->seqnum), le16_to_cpu(priv->cur_cmd->cmdbuf->seqnum));
+ pr_info("Received CMD_RESP with invalid sequence %d (expected %d)\n",
+ le16_to_cpu(resp->seqnum),
+ le16_to_cpu(priv->cur_cmd->cmdbuf->seqnum));
spin_unlock_irqrestore(&priv->driver_lock, flags);
ret = -1;
goto done;
}
if (respcmd != CMD_RET(curcmd) &&
respcmd != CMD_RET_802_11_ASSOCIATE && curcmd != CMD_802_11_ASSOCIATE) {
- lbs_pr_info("Invalid CMD_RESP %x to command %x!\n", respcmd, curcmd);
+ pr_info("Invalid CMD_RESP %x to command %x!\n",
+ respcmd, curcmd);
spin_unlock_irqrestore(&priv->driver_lock, flags);
ret = -1;
goto done;
if (resp->result == cpu_to_le16(0x0004)) {
/* 0x0004 means -EAGAIN. Drop the response, let it time out
and be resubmitted */
- lbs_pr_info("Firmware returns DEFER to command %x. Will let it time out...\n",
- le16_to_cpu(resp->command));
+ pr_info("Firmware returns DEFER to command %x. Will let it time out...\n",
+ le16_to_cpu(resp->command));
spin_unlock_irqrestore(&priv->driver_lock, flags);
ret = -1;
goto done;
lbs_deb_cmd("EVENT: ADHOC beacon lost\n");
break;
case MACREG_INT_CODE_RSSI_LOW:
- lbs_pr_alert("EVENT: rssi low\n");
+ pr_alert("EVENT: rssi low\n");
break;
case MACREG_INT_CODE_SNR_LOW:
- lbs_pr_alert("EVENT: snr low\n");
+ pr_alert("EVENT: snr low\n");
break;
case MACREG_INT_CODE_MAX_FAIL:
- lbs_pr_alert("EVENT: max fail\n");
+ pr_alert("EVENT: max fail\n");
break;
case MACREG_INT_CODE_RSSI_HIGH:
- lbs_pr_alert("EVENT: rssi high\n");
+ pr_alert("EVENT: rssi high\n");
break;
case MACREG_INT_CODE_SNR_HIGH:
- lbs_pr_alert("EVENT: snr high\n");
+ pr_alert("EVENT: snr high\n");
break;
case MACREG_INT_CODE_MESH_AUTO_STARTED:
/* Ignore spurious autostart events */
- lbs_pr_info("EVENT: MESH_AUTO_STARTED (ignoring)\n");
+ pr_info("EVENT: MESH_AUTO_STARTED (ignoring)\n");
break;
default:
- lbs_pr_alert("EVENT: unknown event id %d\n", event);
+ pr_alert("EVENT: unknown event id %d\n", event);
break;
}
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/dcache.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
ret = lbs_set_host_sleep(priv, 0);
else if (host_sleep == 1) {
if (priv->wol_criteria == EHS_REMOVE_WAKEUP) {
- lbs_pr_info("wake parameters not configured");
+ pr_info("wake parameters not configured\n");
ret = -EINVAL;
goto out_unlock;
}
ret = lbs_set_host_sleep(priv, 1);
} else {
- lbs_pr_err("invalid option\n");
+ pr_err("invalid option\n");
ret = -EINVAL;
}
#define lbs_deb_spi(fmt, args...) LBS_DEB_LL(LBS_DEB_SPI, " spi", fmt, ##args)
#define lbs_deb_cfg80211(fmt, args...) LBS_DEB_LL(LBS_DEB_CFG80211, " cfg80211", fmt, ##args)
-#define lbs_pr_info(format, args...) \
- printk(KERN_INFO DRV_NAME": " format, ## args)
-#define lbs_pr_err(format, args...) \
- printk(KERN_ERR DRV_NAME": " format, ## args)
-#define lbs_pr_alert(format, args...) \
- printk(KERN_ALERT DRV_NAME": " format, ## args)
-
#ifdef DEBUG
static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, int len)
{
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
if (status & IF_CS_BIT_COMMAND)
break;
if (++loops > 100) {
- lbs_pr_err("card not ready for commands\n");
+ pr_err("card not ready for commands\n");
goto done;
}
mdelay(1);
/* is hardware ready? */
status = if_cs_read16(priv->card, IF_CS_CARD_STATUS);
if ((status & IF_CS_BIT_RESP) == 0) {
- lbs_pr_err("no cmd response in card\n");
+ pr_err("no cmd response in card\n");
*len = 0;
goto out;
}
*len = if_cs_read16(priv->card, IF_CS_RESP_LEN);
if ((*len == 0) || (*len > LBS_CMD_BUFFER_SIZE)) {
- lbs_pr_err("card cmd buffer has invalid # of bytes (%d)\n", *len);
+ pr_err("card cmd buffer has invalid # of bytes (%d)\n", *len);
goto out;
}
len = if_cs_read16(priv->card, IF_CS_READ_LEN);
if (len == 0 || len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
- lbs_pr_err("card data buffer has invalid # of bytes (%d)\n", len);
+ pr_err("card data buffer has invalid # of bytes (%d)\n", len);
priv->dev->stats.rx_dropped++;
goto dat_err;
}
ret = if_cs_poll_while_fw_download(card, IF_CS_CARD_STATUS,
IF_CS_BIT_COMMAND);
if (ret < 0) {
- lbs_pr_err("can't download helper at 0x%x, ret %d\n",
- sent, ret);
+ pr_err("can't download helper at 0x%x, ret %d\n",
+ sent, ret);
goto done;
}
ret = if_cs_poll_while_fw_download(card, IF_CS_SQ_READ_LOW,
IF_CS_SQ_HELPER_OK);
if (ret < 0) {
- lbs_pr_err("helper firmware doesn't answer\n");
+ pr_err("helper firmware doesn't answer\n");
goto done;
}
len = if_cs_read16(card, IF_CS_SQ_READ_LOW);
if (len & 1) {
retry++;
- lbs_pr_info("odd, need to retry this firmware block\n");
+ pr_info("odd, need to retry this firmware block\n");
} else {
retry = 0;
}
if (retry > 20) {
- lbs_pr_err("could not download firmware\n");
+ pr_err("could not download firmware\n");
ret = -ENODEV;
goto done;
}
ret = if_cs_poll_while_fw_download(card, IF_CS_CARD_STATUS,
IF_CS_BIT_COMMAND);
if (ret < 0) {
- lbs_pr_err("can't download firmware at 0x%x\n", sent);
+ pr_err("can't download firmware at 0x%x\n", sent);
goto done;
}
}
ret = if_cs_poll_while_fw_download(card, IF_CS_SCRATCH, 0x5a);
if (ret < 0)
- lbs_pr_err("firmware download failed\n");
+ pr_err("firmware download failed\n");
done:
lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
ret = if_cs_send_cmd(priv, buf, nb);
break;
default:
- lbs_pr_err("%s: unsupported type %d\n", __func__, type);
+ pr_err("%s: unsupported type %d\n", __func__, type);
}
lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
if (p_dev->resource[1]->end) {
- lbs_pr_err("wrong CIS (check number of IO windows)\n");
+ pr_err("wrong CIS (check number of IO windows)\n");
return -ENODEV;
}
card = kzalloc(sizeof(struct if_cs_card), GFP_KERNEL);
if (!card) {
- lbs_pr_err("error in kzalloc\n");
+ pr_err("error in kzalloc\n");
goto out;
}
card->p_dev = p_dev;
p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) {
- lbs_pr_err("error in pcmcia_loop_config\n");
+ pr_err("error in pcmcia_loop_config\n");
goto out1;
}
card->iobase = ioport_map(p_dev->resource[0]->start,
resource_size(p_dev->resource[0]));
if (!card->iobase) {
- lbs_pr_err("error in ioport_map\n");
+ pr_err("error in ioport_map\n");
ret = -EIO;
goto out1;
}
ret = pcmcia_enable_device(p_dev);
if (ret) {
- lbs_pr_err("error in pcmcia_enable_device\n");
+ pr_err("error in pcmcia_enable_device\n");
goto out2;
}
card->model = get_model(p_dev->manf_id, p_dev->card_id);
if (card->model == MODEL_UNKNOWN) {
- lbs_pr_err("unsupported manf_id 0x%04x / card_id 0x%04x\n",
- p_dev->manf_id, p_dev->card_id);
+ pr_err("unsupported manf_id 0x%04x / card_id 0x%04x\n",
+ p_dev->manf_id, p_dev->card_id);
goto out2;
}
if (card->model == MODEL_8305) {
card->align_regs = 1;
if (prod_id < IF_CS_CF8305_B1_REV) {
- lbs_pr_err("8305 rev B0 and older are not supported\n");
+ pr_err("8305 rev B0 and older are not supported\n");
ret = -ENODEV;
goto out2;
}
}
if ((card->model == MODEL_8381) && prod_id < IF_CS_CF8381_B3_REV) {
- lbs_pr_err("8381 rev B2 and older are not supported\n");
+ pr_err("8381 rev B2 and older are not supported\n");
ret = -ENODEV;
goto out2;
}
if ((card->model == MODEL_8385) && prod_id < IF_CS_CF8385_B1_REV) {
- lbs_pr_err("8385 rev B0 and older are not supported\n");
+ pr_err("8385 rev B0 and older are not supported\n");
ret = -ENODEV;
goto out2;
}
ret = lbs_get_firmware(&p_dev->dev, NULL, NULL, card->model,
&fw_table[0], &helper, &mainfw);
if (ret) {
- lbs_pr_err("failed to find firmware (%d)\n", ret);
+ pr_err("failed to find firmware (%d)\n", ret);
goto out2;
}
ret = request_irq(p_dev->irq, if_cs_interrupt,
IRQF_SHARED, DRV_NAME, card);
if (ret) {
- lbs_pr_err("error in request_irq\n");
+ pr_err("error in request_irq\n");
goto out3;
}
/* And finally bring the card up */
if (lbs_start_card(priv) != 0) {
- lbs_pr_err("could not activate card\n");
+ pr_err("could not activate card\n");
goto out3;
}
* if_sdio_card_to_host() to pad the data.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
out:
if (ret)
- lbs_pr_err("problem fetching packet from firmware\n");
+ pr_err("problem fetching packet from firmware\n");
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
}
if (ret)
- lbs_pr_err("error %d sending packet to firmware\n", ret);
+ pr_err("error %d sending packet to firmware\n", ret);
sdio_release_host(card->func);
out:
if (ret)
- lbs_pr_err("failed to load helper firmware\n");
+ pr_err("failed to load helper firmware\n");
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
return ret;
out:
if (ret)
- lbs_pr_err("failed to load firmware\n");
+ pr_err("failed to load firmware\n");
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
return ret;
ret = lbs_get_firmware(&card->func->dev, lbs_helper_name, lbs_fw_name,
card->model, &fw_table[0], &helper, &mainfw);
if (ret) {
- lbs_pr_err("failed to find firmware (%d)\n", ret);
+ pr_err("failed to find firmware (%d)\n", ret);
goto out;
}
ret = __lbs_cmd(priv, CMD_802_11_DEEP_SLEEP, &cmd, sizeof(cmd),
lbs_cmd_copyback, (unsigned long) &cmd);
if (ret)
- lbs_pr_err("DEEP_SLEEP cmd failed\n");
+ pr_err("DEEP_SLEEP cmd failed\n");
mdelay(200);
return ret;
sdio_writeb(card->func, HOST_POWER_UP, CONFIGURATION_REG, &ret);
if (ret)
- lbs_pr_err("sdio_writeb failed!\n");
+ pr_err("sdio_writeb failed!\n");
sdio_release_host(card->func);
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
sdio_writeb(card->func, 0, CONFIGURATION_REG, &ret);
if (ret)
- lbs_pr_err("sdio_writeb failed!\n");
+ pr_err("sdio_writeb failed!\n");
sdio_release_host(card->func);
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
}
if (i == func->card->num_info) {
- lbs_pr_err("unable to identify card model\n");
+ pr_err("unable to identify card model\n");
return -ENODEV;
}
break;
}
if (i == ARRAY_SIZE(fw_table)) {
- lbs_pr_err("unknown card model 0x%x\n", card->model);
+ pr_err("unknown card model 0x%x\n", card->model);
ret = -ENODEV;
goto free;
}
lbs_deb_sdio("send function INIT command\n");
if (__lbs_cmd(priv, CMD_FUNC_INIT, &cmd, sizeof(cmd),
lbs_cmd_copyback, (unsigned long) &cmd))
- lbs_pr_alert("CMD_FUNC_INIT cmd failed\n");
+ pr_alert("CMD_FUNC_INIT cmd failed\n");
}
ret = lbs_start_card(priv);
if (__lbs_cmd(card->priv, CMD_FUNC_SHUTDOWN,
&cmd, sizeof(cmd), lbs_cmd_copyback,
(unsigned long) &cmd))
- lbs_pr_alert("CMD_FUNC_SHUTDOWN cmd failed\n");
+ pr_alert("CMD_FUNC_SHUTDOWN cmd failed\n");
}
mmc_pm_flag_t flags = sdio_get_host_pm_caps(func);
- lbs_pr_info("%s: suspend: PM flags = 0x%x\n",
- sdio_func_id(func), flags);
+ pr_info("%s: suspend: PM flags = 0x%x\n", sdio_func_id(func), flags);
/* If we aren't being asked to wake on anything, we should bail out
* and let the SD stack power down the card.
*/
if (card->priv->wol_criteria == EHS_REMOVE_WAKEUP) {
- lbs_pr_info("Suspend without wake params -- "
- "powering down card.");
+ pr_info("Suspend without wake params -- powering down card\n");
return -ENOSYS;
}
if (!(flags & MMC_PM_KEEP_POWER)) {
- lbs_pr_err("%s: cannot remain alive while host is suspended\n",
- sdio_func_id(func));
+ pr_err("%s: cannot remain alive while host is suspended\n",
+ sdio_func_id(func));
return -ENOSYS;
}
struct if_sdio_card *card = sdio_get_drvdata(func);
int ret;
- lbs_pr_info("%s: resume: we're back\n", sdio_func_id(func));
+ pr_info("%s: resume: we're back\n", sdio_func_id(func));
ret = lbs_resume(card->priv);
* (at your option) any later version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/moduleparam.h>
#include <linux/firmware.h>
#include <linux/jiffies.h>
}
udelay(100);
if (time_after(jiffies, timeout)) {
- lbs_pr_err("%s: timeout with val=%02x, "
- "target_mask=%02x, target=%02x\n",
+ pr_err("%s: timeout with val=%02x, target_mask=%02x, target=%02x\n",
__func__, val, target_mask, target);
return -ETIMEDOUT;
}
if (err)
return err;
if ((rval & 0xF) != mode) {
- lbs_pr_err("Can't read bus mode register.\n");
+ pr_err("Can't read bus mode register\n");
return -EIO;
}
return 0;
out:
if (err)
- lbs_pr_err("failed to load helper firmware (err=%d)\n", err);
+ pr_err("failed to load helper firmware (err=%d)\n", err);
lbs_deb_leave_args(LBS_DEB_SPI, "err %d", err);
return err;
}
IF_SPI_HIST_CMD_DOWNLOAD_RDY,
IF_SPI_HIST_CMD_DOWNLOAD_RDY);
if (err) {
- lbs_pr_err("timed out waiting for host_int_status\n");
+ pr_err("timed out waiting for host_int_status\n");
return err;
}
return err;
if (len > IF_SPI_CMD_BUF_SIZE) {
- lbs_pr_err("firmware load device requested a larger "
- "tranfer than we are prepared to "
- "handle. (len = %d)\n", len);
+ pr_err("firmware load device requested a larger transfer than we are prepared to handle (len = %d)\n",
+ len);
return -EIO;
}
if (len & 0x1) {
err = spu_wait_for_u16(card, IF_SPI_SCRATCH_1_REG, 0, 0);
if (err) {
- lbs_pr_err("%s: timed out waiting for initial "
- "scratch reg = 0\n", __func__);
+ pr_err("%s: timed out waiting for initial scratch reg = 0\n",
+ __func__);
goto out;
}
* If there are no more bytes left, we would normally
* expect to have terminated with len = 0
*/
- lbs_pr_err("Firmware load wants more bytes "
- "than we have to offer.\n");
+ pr_err("Firmware load wants more bytes than we have to offer.\n");
break;
}
if (crc_err) {
/* Previous transfer failed. */
if (++num_crc_errs > MAX_MAIN_FW_LOAD_CRC_ERR) {
- lbs_pr_err("Too many CRC errors encountered "
- "in firmware load.\n");
+ pr_err("Too many CRC errors encountered in firmware load.\n");
err = -EIO;
goto out;
}
prev_len = len;
}
if (bytes > prev_len) {
- lbs_pr_err("firmware load wants fewer bytes than "
- "we have to offer.\n");
+ pr_err("firmware load wants fewer bytes than we have to offer\n");
}
/* Confirm firmware download */
err = spu_wait_for_u32(card, IF_SPI_SCRATCH_4_REG,
SUCCESSFUL_FW_DOWNLOAD_MAGIC);
if (err) {
- lbs_pr_err("failed to confirm the firmware download\n");
+ pr_err("failed to confirm the firmware download\n");
goto out;
}
out:
if (err)
- lbs_pr_err("failed to load firmware (err=%d)\n", err);
+ pr_err("failed to load firmware (err=%d)\n", err);
lbs_deb_leave_args(LBS_DEB_SPI, "err %d", err);
return err;
}
if (err)
goto out;
if (!len) {
- lbs_pr_err("%s: error: card has no data for host\n",
- __func__);
+ pr_err("%s: error: card has no data for host\n", __func__);
err = -EINVAL;
goto out;
} else if (len > IF_SPI_CMD_BUF_SIZE) {
- lbs_pr_err("%s: error: response packet too large: "
- "%d bytes, but maximum is %d\n",
- __func__, len, IF_SPI_CMD_BUF_SIZE);
+ pr_err("%s: error: response packet too large: %d bytes, but maximum is %d\n",
+ __func__, len, IF_SPI_CMD_BUF_SIZE);
err = -EINVAL;
goto out;
}
out:
if (err)
- lbs_pr_err("%s: err=%d\n", __func__, err);
+ pr_err("%s: err=%d\n", __func__, err);
lbs_deb_leave(LBS_DEB_SPI);
return err;
}
if (err)
goto out;
if (!len) {
- lbs_pr_err("%s: error: card has no data for host\n",
- __func__);
+ pr_err("%s: error: card has no data for host\n", __func__);
err = -EINVAL;
goto out;
} else if (len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
- lbs_pr_err("%s: error: card has %d bytes of data, but "
- "our maximum skb size is %zu\n",
- __func__, len, MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
+ pr_err("%s: error: card has %d bytes of data, but our maximum skb size is %zu\n",
+ __func__, len, MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
err = -EINVAL;
goto out;
}
dev_kfree_skb(skb);
out:
if (err)
- lbs_pr_err("%s: err=%d\n", __func__, err);
+ pr_err("%s: err=%d\n", __func__, err);
lbs_deb_leave(LBS_DEB_SPI);
return err;
}
port_reg = IF_SPI_CMD_RDWRPORT_REG;
break;
default:
- lbs_pr_err("can't transfer buffer of type %d\n", type);
+ pr_err("can't transfer buffer of type %d\n", type);
err = -EINVAL;
goto out;
}
kfree(packet);
if (err)
- lbs_pr_err("%s: error %d\n", __func__, err);
+ pr_err("%s: error %d\n", __func__, err);
}
/* Inform the host about a card event */
lbs_queue_event(priv, cause & 0xff);
out:
if (err)
- lbs_pr_err("%s: error %d\n", __func__, err);
+ pr_err("%s: error %d\n", __func__, err);
}
static void if_spi_host_to_card_worker(struct work_struct *work)
err = spu_read_u16(card, IF_SPI_HOST_INT_STATUS_REG,
&hiStatus);
if (err) {
- lbs_pr_err("I/O error\n");
+ pr_err("I/O error\n");
goto err;
}
err:
if (err)
- lbs_pr_err("%s: got error %d\n", __func__, err);
+ pr_err("%s: got error %d\n", __func__, err);
lbs_deb_leave(LBS_DEB_SPI);
}
lbs_deb_enter_args(LBS_DEB_SPI, "type %d, bytes %d", type, nb);
if (nb == 0) {
- lbs_pr_err("%s: invalid size requested: %d\n", __func__, nb);
+ pr_err("%s: invalid size requested: %d\n", __func__, nb);
err = -EINVAL;
goto out;
}
spin_unlock_irqrestore(&card->buffer_lock, flags);
break;
default:
- lbs_pr_err("can't transfer buffer of type %d", type);
+ pr_err("can't transfer buffer of type %d\n", type);
err = -EINVAL;
break;
}
break;
}
if (i == ARRAY_SIZE(fw_table)) {
- lbs_pr_err("Unsupported chip_id: 0x%02x\n",
- card->card_id);
+ pr_err("Unsupported chip_id: 0x%02x\n", card->card_id);
err = -ENODEV;
goto out;
}
card->card_id, &fw_table[0], &helper,
&mainfw);
if (err) {
- lbs_pr_err("failed to find firmware (%d)\n", err);
+ pr_err("failed to find firmware (%d)\n", err);
goto out;
}
err = request_irq(spi->irq, if_spi_host_interrupt,
IRQF_TRIGGER_FALLING, "libertas_spi", card);
if (err) {
- lbs_pr_err("can't get host irq line-- request_irq failed\n");
+ pr_err("can't get host irq line-- request_irq failed\n");
goto terminate_workqueue;
}
/*
* This file contains functions used in USB interface module.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/delay.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
lbs_host_to_card_done(priv);
} else {
/* print the failure status number for debug */
- lbs_pr_info("URB in failure status: %d\n", urb->status);
+ pr_info("URB in failure status: %d\n", urb->status);
}
}
wake_method.hdr.size = cpu_to_le16(sizeof(wake_method));
wake_method.action = cpu_to_le16(CMD_ACT_GET);
if (lbs_cmd_with_response(priv, CMD_802_11_FW_WAKE_METHOD, &wake_method)) {
- lbs_pr_info("Firmware does not seem to support PS mode\n");
+ pr_info("Firmware does not seem to support PS mode\n");
priv->fwcapinfo &= ~FW_CAPINFO_PS;
} else {
if (le16_to_cpu(wake_method.method) == CMD_WAKE_METHOD_COMMAND_INT) {
/* The versions which boot up this way don't seem to
work even if we set it to the command interrupt */
priv->fwcapinfo &= ~FW_CAPINFO_PS;
- lbs_pr_info("Firmware doesn't wake via command interrupt; disabling PS mode\n");
+ pr_info("Firmware doesn't wake via command interrupt; disabling PS mode\n");
}
}
}
if (cardp->fwdnldover) {
lbs_deb_usb("Download complete, no event. Assuming success\n");
} else {
- lbs_pr_err("Download timed out\n");
+ pr_err("Download timed out\n");
cardp->surprise_removed = 1;
}
wake_up(&cardp->fw_wq);
cardp = kzalloc(sizeof(struct if_usb_card), GFP_KERNEL);
if (!cardp) {
- lbs_pr_err("Out of memory allocating private data.\n");
+ pr_err("Out of memory allocating private data\n");
goto error;
}
usb_set_intfdata(intf, cardp);
if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_fw))
- lbs_pr_err("cannot register lbs_flash_fw attribute\n");
+ pr_err("cannot register lbs_flash_fw attribute\n");
if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2))
- lbs_pr_err("cannot register lbs_flash_boot2 attribute\n");
+ pr_err("cannot register lbs_flash_boot2 attribute\n");
/*
* EHS_REMOVE_WAKEUP is not supported on all versions of the firmware.
int ret = -1;
if (!(skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE))) {
- lbs_pr_err("No free skb\n");
+ pr_err("No free skb\n");
goto rx_ret;
}
if (tmp[0] == cpu_to_le32(CMD_TYPE_INDICATION) &&
tmp[1] == cpu_to_le32(MACREG_INT_CODE_FIRMWARE_READY)) {
- lbs_pr_info("Firmware ready event received\n");
+ pr_info("Firmware ready event received\n");
wake_up(&cardp->fw_wq);
} else {
lbs_deb_usb("Waiting for confirmation; got %x %x\n",
bootcmdresp.magic == cpu_to_le32(CMD_TYPE_DATA) ||
bootcmdresp.magic == cpu_to_le32(CMD_TYPE_INDICATION)) {
if (!cardp->bootcmdresp)
- lbs_pr_info("Firmware already seems alive; resetting\n");
+ pr_info("Firmware already seems alive; resetting\n");
cardp->bootcmdresp = -1;
} else {
- lbs_pr_info("boot cmd response wrong magic number (0x%x)\n",
+ pr_info("boot cmd response wrong magic number (0x%x)\n",
le32_to_cpu(bootcmdresp.magic));
}
} else if ((bootcmdresp.cmd != BOOT_CMD_FW_BY_USB) &&
(bootcmdresp.cmd != BOOT_CMD_UPDATE_FW) &&
(bootcmdresp.cmd != BOOT_CMD_UPDATE_BOOT2)) {
- lbs_pr_info("boot cmd response cmd_tag error (%d)\n",
- bootcmdresp.cmd);
+ pr_info("boot cmd response cmd_tag error (%d)\n",
+ bootcmdresp.cmd);
} else if (bootcmdresp.result != BOOT_CMD_RESP_OK) {
- lbs_pr_info("boot cmd response result error (%d)\n",
- bootcmdresp.result);
+ pr_info("boot cmd response result error (%d)\n",
+ bootcmdresp.result);
} else {
cardp->bootcmdresp = 1;
lbs_deb_usbd(&cardp->udev->dev,
} while (!exit);
if (ret)
- lbs_pr_err("firmware file format check FAIL\n");
+ pr_err("firmware file format check FAIL\n");
else
lbs_deb_fw("firmware file format check PASS\n");
ret = get_fw(cardp, fwname);
if (ret) {
- lbs_pr_err("failed to find firmware (%d)\n", ret);
+ pr_err("failed to find firmware (%d)\n", ret);
goto done;
}
usb_kill_urb(cardp->rx_urb);
if (!cardp->fwdnldover) {
- lbs_pr_info("failed to load fw, resetting device!\n");
+ pr_info("failed to load fw, resetting device!\n");
if (--reset_count >= 0) {
if_usb_reset_device(cardp);
goto restart;
}
- lbs_pr_info("FW download failure, time = %d ms\n", i * 100);
+ pr_info("FW download failure, time = %d ms\n", i * 100);
ret = -EIO;
goto release_fw;
}
* thread etc..
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/moduleparam.h>
#include <linux/delay.h>
#include <linux/etherdevice.h>
if (priv->cmd_timed_out && priv->cur_cmd) {
struct cmd_ctrl_node *cmdnode = priv->cur_cmd;
- lbs_pr_info("Timeout submitting command 0x%04x\n",
+ pr_info("Timeout submitting command 0x%04x\n",
le16_to_cpu(cmdnode->cmdbuf->command));
lbs_complete_command(priv, cmdnode, -ETIMEDOUT);
if (priv->reset_card)
* after firmware fixes it
*/
priv->psstate = PS_STATE_AWAKE;
- lbs_pr_alert("ignore PS_SleepConfirm in "
- "non-connected state\n");
+ pr_alert("ignore PS_SleepConfirm in non-connected state\n");
}
}
if (priv->is_deep_sleep) {
ret = lbs_set_deep_sleep(priv, 0);
if (ret) {
- lbs_pr_err("deep sleep cancellation failed: %d\n", ret);
+ pr_err("deep sleep cancellation failed: %d\n", ret);
return ret;
}
priv->deep_sleep_required = 1;
priv->deep_sleep_required = 0;
ret = lbs_set_deep_sleep(priv, 1);
if (ret)
- lbs_pr_err("deep sleep activation failed: %d\n", ret);
+ pr_err("deep sleep activation failed: %d\n", ret);
}
if (priv->setup_fw_on_resume)
if (!priv->cur_cmd)
goto out;
- lbs_pr_info("command 0x%04x timed out\n",
+ pr_info("command 0x%04x timed out\n",
le16_to_cpu(priv->cur_cmd->cmdbuf->command));
priv->cmd_timed_out = 1;
/* Allocate the command buffers */
if (lbs_allocate_cmd_buffer(priv)) {
- lbs_pr_err("Out of memory allocating command buffers\n");
+ pr_err("Out of memory allocating command buffers\n");
ret = -ENOMEM;
goto out;
}
/* Create the event FIFO */
ret = kfifo_alloc(&priv->event_fifo, sizeof(u32) * 16, GFP_KERNEL);
if (ret) {
- lbs_pr_err("Out of memory allocating event FIFO buffer\n");
+ pr_err("Out of memory allocating event FIFO buffer\n");
goto out;
}
/* Allocate an Ethernet device and register it */
wdev = lbs_cfg_alloc(dmdev);
if (IS_ERR(wdev)) {
- lbs_pr_err("cfg80211 init failed\n");
+ pr_err("cfg80211 init failed\n");
goto done;
}
priv->wdev = wdev;
if (lbs_init_adapter(priv)) {
- lbs_pr_err("failed to initialize adapter structure.\n");
+ pr_err("failed to initialize adapter structure\n");
goto err_wdev;
}
goto done;
if (lbs_cfg_register(priv)) {
- lbs_pr_err("cannot register device\n");
+ pr_err("cannot register device\n");
goto done;
}
lbs_debugfs_init_one(priv, dev);
- lbs_pr_info("%s: Marvell WLAN 802.11 adapter\n", dev->name);
+ pr_info("%s: Marvell WLAN 802.11 adapter\n", dev->name);
ret = 0;
if (user_helper) {
ret = request_firmware(helper, user_helper, dev);
if (ret) {
- lbs_pr_err("couldn't find helper firmware %s",
- user_helper);
+ pr_err("couldn't find helper firmware %s", user_helper);
goto fail;
}
}
if (user_mainfw) {
ret = request_firmware(mainfw, user_mainfw, dev);
if (ret) {
- lbs_pr_err("couldn't find main firmware %s",
- user_mainfw);
+ pr_err("couldn't find main firmware %s", user_mainfw);
goto fail;
}
}
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/netdevice.h>
lbs_add_mesh(priv);
if (device_create_file(&dev->dev, &dev_attr_lbs_mesh))
- lbs_pr_err("cannot register lbs_mesh attribute\n");
+ pr_err("cannot register lbs_mesh attribute\n");
ret = 1;
}
/* Register virtual mesh interface */
ret = register_netdev(mesh_dev);
if (ret) {
- lbs_pr_err("cannot register mshX virtual interface\n");
+ pr_err("cannot register mshX virtual interface\n");
goto err_free;
}
return ret;
if (defs.meshie.val.mesh_id_len > IEEE80211_MAX_SSID_LEN) {
- lbs_pr_err("inconsistent mesh ID length");
+ pr_err("inconsistent mesh ID length\n");
defs.meshie.val.mesh_id_len = IEEE80211_MAX_SSID_LEN;
}
/*
* This file contains the handling of RX in wlan driver.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/etherdevice.h>
#include <linux/slab.h>
#include <linux/types.h>
case 12: /* 54 Mbps */
return 108;
}
- lbs_pr_alert("Invalid Marvell WLAN rate %i\n", rate);
+ pr_alert("Invalid Marvell WLAN rate %i\n", rate);
return 0;
}
/* add space for the new radio header */
if ((skb_headroom(skb) < sizeof(struct rx_radiotap_hdr)) &&
pskb_expand_head(skb, sizeof(struct rx_radiotap_hdr), 0, GFP_ATOMIC)) {
- lbs_pr_alert("%s: couldn't pskb_expand_head\n", __func__);
+ pr_alert("%s: couldn't pskb_expand_head\n", __func__);
ret = -ENOMEM;
kfree_skb(skb);
goto done;
projects / openwrt / staging / blogic.git / commitdiff