armada-xp-maxbcm.dtb \
armada-xp-synology-ds414.dtb \
armada-xp-theadorable.dtb \
- armada-38x-controlcenterdc.dtb
+ armada-38x-controlcenterdc.dtb \
+ armada-385-atl-x530.dtb \
+ armada-385-atl-x530DP.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_LD11) += \
uniphier-ld11-global.dtb \
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+
+&spi1 {
+ u-boot,dm-pre-reloc;
+
+ spi-flash@0 {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "armada-385-atl-x530.dtsi"
+#include "armada-385-atl-x530-u-boot.dtsi"
+
+/ {
+ model = "Allied Telesis x530";
+ compatible = "alliedtelesis,x530", "marvell,armada385", "marvell,armada380";
+
+ nand-protect {
+ compatible = "atl,nand-protect";
+ protect-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb-enable {
+ compatible = "atl,usb-enable";
+ enable-gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ boot-board {
+ compatible = "atl,boot-board";
+ present-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+ override-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ phy-reset {
+ compatible = "atl,phy-reset";
+ reset-gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>,
+ <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-enable {
+ compatible = "atl,led-enable";
+ enable-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_7seg {
+ compatible = "atl,of-led-7seg";
+ segment-gpios = <
+ &led_7seg_gpio 0 0
+ &led_7seg_gpio 1 0
+ &led_7seg_gpio 2 0
+ &led_7seg_gpio 3 0
+ &led_7seg_gpio 4 0
+ &led_7seg_gpio 5 0
+ &led_7seg_gpio 6 0
+ &led_7seg_gpio 7 0>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-385.dtsi"
+
+/ {
+ model = "Allied Telesis x530";
+ compatible = "alliedtelesis,x530", "marvell,armada385", "marvell,armada380";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ aliases {
+ spi1 = &spi1;
+ i2c0 = &i2c0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x3d) 0 0xf4800000 0x80000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+ pcie-mem-aperture = <0xa0000000 0x40000000>;
+ };
+
+ eco-button-interrupt {
+ compatible = "atl,eco-button-interrupt";
+ eco-button-gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ board-reset {
+ compatible = "atl,phy_reset";
+ /* Physical board layout of reset pin is active-low but for the
+ * current driver we have to set it to active-high here.
+ */
+ phy-reset-gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>,
+ <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ phy-int {
+ compatible = "linux,uio-pdrv-genirq";
+ interrupt-parent = <&gpio0>;
+ interrupts = <6 IRQ_TYPE_EDGE_BOTH>;
+ };
+
+ led-enable {
+ compatible = "atl,led-enable";
+ led-enable-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+ };
+
+ led_7seg {
+ compatible = "atl,of-led-7seg";
+ segment-gpios = <
+ &led_7seg_gpio 0 0
+ &led_7seg_gpio 1 0
+ &led_7seg_gpio 2 0
+ &led_7seg_gpio 3 0
+ &led_7seg_gpio 4 0
+ &led_7seg_gpio 5 0
+ &led_7seg_gpio 6 0
+ &led_7seg_gpio 7 0>;
+ };
+
+ poe {
+ compatible = "atl,periph-poe";
+ poe-reset-gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <20 IRQ_TYPE_EDGE_BOTH>;
+ };
+};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&devbus_cs1 {
+ compatible = "marvell,mvebu-devbus";
+ status = "okay";
+
+ devbus,bus-width = <8>;
+ devbus,turn-off-ps = <60000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <124000>;
+ devbus,acc-next-ps = <248000>;
+ devbus,rd-setup-ps = <0>;
+ devbus,rd-hold-ps = <0>;
+
+ /* Write parameters */
+ devbus,sync-enable = <0>;
+ devbus,wr-high-ps = <60000>;
+ devbus,wr-low-ps = <60000>;
+ devbus,ale-wr-ps = <60000>;
+
+ nvs@0 {
+ status = "okay";
+
+ compatible = "mtd-ram";
+ reg = <0 0x00080000>;
+ bank-width = <1>;
+ label = "nvs";
+ };
+};
+
+&gpio0 {
+ poe-disable {
+ gpio-hog;
+ gpios = <16 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "poe-disable";
+ };
+};
+
+&gpio1 {
+ poe-mezz-reset {
+ gpio-hog;
+ gpios = <15 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "poe-mezz-reset";
+ };
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ status = "okay";
+
+ mux@71 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nxp,pca9544";
+ reg = <0x71>;
+ i2c-mux-idle-disconnect;
+
+ i2c@0 { /* POE devices MUX */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ rng@3b {
+ compatible = "maxim,ds2476";
+ reg = <0x3b>;
+ };
+
+ hwmon@2e {
+ compatible = "adi,adt7476";
+ reg = <0x2e>;
+ };
+
+ hwmon@2d {
+ compatible = "adi,adt7476";
+ reg = <0x2d>;
+ };
+
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ rtc@68 {
+ compatible = "dallas,ds1340";
+ reg = <0x68>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ led_7seg_gpio: gpio@20 {
+ compatible = "nxp,pca9554";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+ };
+
+ sfpgpio: gpio@27 { /* I2C to GPIO */
+ compatible = "nxp,pca9555";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x27>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ sfpmux: mux@77 { /* SFP I2C MUX */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nxp,pca9544";
+ reg = <0x77>;
+ i2c-mux-idle-disconnect;
+ };
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ partition@u-boot {
+ reg = <0x00000000 0x00100000>;
+ label = "u-boot";
+ };
+ partition@u-boot-env {
+ reg = <0x00100000 0x00040000>;
+ label = "u-boot-env";
+ };
+ partition@unused {
+ reg = <0x00140000 0x00e80000>;
+ label = "unused";
+ };
+ partition@idprom {
+ reg = <0x00fc0000 0x00040000>;
+ label = "idprom";
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&refclk {
+ clock-frequency = <25000000>;
+};
+
+&nand_controller { /* 256 MB */
+ status = "okay";
+ num-cs = <1>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "armada-385-atl-x530.dtsi"
+#include "armada-385-atl-x530-u-boot.dtsi"
+#include "armada-385-atl-x530DP.dtsi"
+
+/ {
+ model = "Allied Telesis x530DP";
+ compatible = "alliedtelesis,x530DP", "alliedtelesis,x530", "marvell,armada385", "marvell,armada380";
+
+ nand-protect {
+ compatible = "atl,nand-protect";
+ protect-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb-enable {
+ compatible = "atl,usb-enable";
+ enable-gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ boot-board {
+ compatible = "atl,boot-board";
+ present-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+ override-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ phy-reset {
+ compatible = "atl,phy-reset";
+ reset-gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>,
+ <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-enable {
+ compatible = "atl,led-enable";
+ enable-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_7seg {
+ compatible = "atl,of-led-7seg";
+ segment-gpios = <
+ &led_7seg_gpio 0 0
+ &led_7seg_gpio 1 0
+ &led_7seg_gpio 2 0
+ &led_7seg_gpio 3 0
+ &led_7seg_gpio 4 0
+ &led_7seg_gpio 5 0
+ &led_7seg_gpio 6 0
+ &led_7seg_gpio 7 0>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+
+&i2c0 {
+ mux@71 {
+ compatible = "nxp,pca9548";
+
+ i2c@1 {
+ hwmon@2c {
+ compatible = "ti,lm87";
+ reg = <0x2c>;
+ };
+
+ hwmon@2d {
+ compatible = "ti,lm87";
+ reg = <0x2d>;
+ };
+
+ hwmon@2e {
+ pwm-polarity = <1>;
+ };
+ };
+
+ psu_a_adapter: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ psu_b_adapter: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+
+ misc_gpio: gpio@26 {
+ compatible = "nxp,pca9555";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x26>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ status = "okay";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ psu_bank2 {
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "psu-bank2";
+ };
+ };
+ };
+ };
+};
+
+/ {
+ psu_slot_a {
+ compatible = "atl,dts-overlay-gpio-psu-slot";
+ slot-name = "PSU Bay A";
+ board-index = <1>;
+ present-gpio = <&misc_gpio 1 GPIO_ACTIVE_LOW>;
+ output-ok-gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&misc_gpio>;
+ interrupts = <1 IRQ_TYPE_EDGE_BOTH>;
+ overlay = <&psu_a_overlay>;
+ };
+
+ psu_slot_b {
+ compatible = "atl,dts-overlay-gpio-psu-slot";
+ slot-name = "PSU Bay B";
+ board-index = <2>;
+ present-gpio = <&misc_gpio 2 GPIO_ACTIVE_LOW>;
+ output-ok-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&misc_gpio>;
+ interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
+ overlay = <&psu_b_overlay>;
+ };
+
+ fan_slot_a {
+ compatible = "atl,fan05-slot";
+ slot-name = "Fan Bay A";
+ board-index = <3>;
+ present-gpio = <&misc_gpio 3 GPIO_ACTIVE_LOW>;
+ fault-gpio = <&misc_gpio 11 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&misc_gpio>;
+ interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+ overlay = <&fan_a_overlay>;
+ };
+};
+
+/ {
+ psu_a_overlay: psu_a {
+ fragment@0 {
+ target = <&psu_a_adapter>;
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ psu@51 {
+ compatible = "atl,atl-pwr-gen2";
+ reg = <0x51>;
+ board-index = <1>;
+ };
+ };
+ };
+ };
+};
+
+/ {
+ psu_b_overlay: psu_b {
+ fragment@0 {
+ target = <&psu_b_adapter>;
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ psu@51 {
+ compatible = "atl,atl-pwr-gen2";
+ reg = <0x51>;
+ board-index = <2>;
+ };
+ };
+ };
+ };
+};
+
+/ {
+ fan_a_overlay:fan_a {
+ fragment@1 {
+ target-path = "/";
+ __overlay__ {
+ fan@1 {
+ compatible = "atl,fan05";
+ board-index = <3>;
+ module-id-gpios =
+ <&misc_gpio 4 GPIO_ACTIVE_HIGH>,
+ <&misc_gpio 5 GPIO_ACTIVE_HIGH>,
+ <&misc_gpio 6 GPIO_ACTIVE_HIGH>;
+ };
+ };
+ };
+ };
+};
bool "Support CONTROLCENTERDC"
select 88F6820
+config TARGET_X530
+ bool "Support Allied Telesis x530"
+ select 88F6820
+
endchoice
config SYS_BOARD
default "maxbcm" if TARGET_MAXBCM
default "theadorable" if TARGET_THEADORABLE
default "a38x" if TARGET_CONTROLCENTERDC
+ default "x530" if TARGET_X530
config SYS_CONFIG_NAME
default "clearfog" if TARGET_CLEARFOG
default "turris_omnia" if TARGET_TURRIS_OMNIA
default "turris_mox" if TARGET_TURRIS_MOX
default "controlcenterdc" if TARGET_CONTROLCENTERDC
+ default "x530" if TARGET_X530
config SYS_VENDOR
default "Marvell" if TARGET_DB_MV784MP_GP
default "CZ.NIC" if TARGET_TURRIS_OMNIA
default "CZ.NIC" if TARGET_TURRIS_MOX
default "gdsys" if TARGET_CONTROLCENTERDC
+ default "alliedtelesis" if TARGET_X530
config SYS_SOC
default "mvebu"
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Allied Telesis Labs
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int gpio_hog_list(struct gpio_desc *gpiod, int max_count,
+ const char *node_name, const char *gpio_name, int value)
+{
+ int node;
+ int count;
+ int i;
+
+ node = fdt_node_offset_by_compatible(gd->fdt_blob, 0, node_name);
+ if (node < 0)
+ return -ENODEV;
+
+ if (!dm_gpio_is_valid(gpiod)) {
+ count =
+ gpio_request_list_by_name_nodev(offset_to_ofnode(node),
+ gpio_name, gpiod, max_count,
+ GPIOD_IS_OUT);
+ if (count < 0)
+ return count;
+
+ for (i = 0; i < count; i++)
+ dm_gpio_set_value(&gpiod[i], value);
+ }
+
+ return 0;
+}
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017 Allied Telesis Labs
+ */
+
+int gpio_hog_list(struct gpio_desc *gpiod, int max_count, const char *node_name,
+ const char *gpio_name, int value);
+
+static inline int gpio_hog(struct gpio_desc *gpiod, const char *node_name,
+ const char *gpio_name, int value)
+{
+ return gpio_hog_list(gpiod, 1, node_name, gpio_name, value);
+}
--- /dev/null
+x530 BOARD
+M: Chris Packham <chris.packham@alliedtelesis.co.nz>
+S: Maintained
+F: board/alliedtelesis/x530/
+F: board/alliedtelesis/common/gpio_hog.c
+F: board/alliedtelesis/common/gpio_hog.h
+F: arch/arm/dts/armada-385-atl-x530.dts
+F: arch/arm/dts/armada-385-atl-x530.dtsi
+F: arch/arm/dts/armada-385-atl-x530DP.dts
+F: arch/arm/dts/armada-385-atl-x530DP.dtsi
+F: include/configs/x530.h
+F: configs/x530_defconfig
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2017 Allied Telesis Labs
+#
+
+obj-y := $(BOARD).o
+ifndef CONFIG_SPL_BUILD
+obj-y += ../common/gpio_hog.o
+endif
--- /dev/null
+#
+# Copyright (C) 2017 Allied Telesis Labs
+#
+
+# Armada XP uses version 1 image format
+VERSION 1
+
+# Boot Media configurations
+BOOT_FROM spi
+
+# Binary Header (bin_hdr) with DDR3 training code
+BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Allied Telesis Labs
+ */
+
+#include <common.h>
+#include <command.h>
+#include <dm.h>
+#include <i2c.h>
+#include <asm/gpio.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include "../common/gpio_hog.h"
+
+#include "../drivers/ddr/marvell/a38x/ddr3_init.h"
+#include <../serdes/a38x/high_speed_env_spec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define MVEBU_DEV_BUS_BASE (MVEBU_REGISTER(0x10400))
+
+#define CONFIG_NVS_LOCATION 0xf4800000
+#define CONFIG_NVS_SIZE (512 << 10)
+
+static struct serdes_map board_serdes_map[] = {
+ {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+ {DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+ {DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}
+};
+
+int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count)
+{
+ *serdes_map_array = board_serdes_map;
+ *count = ARRAY_SIZE(board_serdes_map);
+ return 0;
+}
+
+/*
+ * Define the DDR layout / topology here in the board file. This will
+ * be used by the DDR3 init code in the SPL U-Boot version to configure
+ * the DDR3 controller.
+ */
+static struct mv_ddr_topology_map board_topology_map = {
+ DEBUG_LEVEL_ERROR,
+ 0x1, /* active interfaces */
+ /* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
+ { { { {0x1, 0, 0, 0},
+ {0x1, 0, 0, 0},
+ {0x1, 0, 0, 0},
+ {0x1, 0, 0, 0},
+ {0x1, 0, 0, 0} },
+ SPEED_BIN_DDR_1866M, /* speed_bin */
+ MV_DDR_DEV_WIDTH_16BIT, /* sdram device width */
+ MV_DDR_DIE_CAP_4GBIT, /* die capacity */
+ MV_DDR_FREQ_933, /* frequency */
+ 0, 0, /* cas_l cas_wl */
+ MV_DDR_TEMP_LOW, /* temperature */
+ MV_DDR_TIM_2T} }, /* timing */
+ BUS_MASK_32BIT_ECC, /* subphys mask */
+ MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
+ { {0} }, /* raw spd data */
+ {0} /* timing parameters */
+};
+
+struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
+{
+ /* Return the board topology as defined in the board code */
+ return &board_topology_map;
+}
+
+int board_early_init_f(void)
+{
+ /* Configure MPP */
+ writel(0x00001111, MVEBU_MPP_BASE + 0x00);
+ writel(0x00000000, MVEBU_MPP_BASE + 0x04);
+ writel(0x55000000, MVEBU_MPP_BASE + 0x08);
+ writel(0x55550550, MVEBU_MPP_BASE + 0x0c);
+ writel(0x55555555, MVEBU_MPP_BASE + 0x10);
+ writel(0x00100565, MVEBU_MPP_BASE + 0x14);
+ writel(0x40000000, MVEBU_MPP_BASE + 0x18);
+ writel(0x00004444, MVEBU_MPP_BASE + 0x1c);
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
+
+ /* window for NVS */
+ mbus_dt_setup_win(&mbus_state, CONFIG_NVS_LOCATION, CONFIG_NVS_SIZE,
+ CPU_TARGET_DEVICEBUS_BOOTROM_SPI, CPU_ATTR_DEV_CS1);
+
+ /* DEV_READYn is not needed for NVS, ignore it when accessing CS1 */
+ writel(0x00004001, MVEBU_DEV_BUS_BASE + 0xc8);
+
+ return 0;
+}
+
+static int led_7seg_init(unsigned int segments)
+{
+ int node;
+ int ret;
+ int i;
+ struct gpio_desc desc[8];
+
+ node = fdt_node_offset_by_compatible(gd->fdt_blob, 0,
+ "atl,of-led-7seg");
+ if (node < 0)
+ return -ENODEV;
+
+ ret = gpio_request_list_by_name_nodev(offset_to_ofnode(node),
+ "segment-gpios", desc,
+ ARRAY_SIZE(desc), GPIOD_IS_OUT);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < ARRAY_SIZE(desc); i++) {
+ ret = dm_gpio_set_value(&desc[i], !(segments & BIT(i)));
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+ static struct gpio_desc usb_en = {}, nand_wp = {}, phy_reset[2] = {},
+ led_en = {};
+
+ gpio_hog(&usb_en, "atl,usb-enable", "enable-gpio", 1);
+ gpio_hog(&nand_wp, "atl,nand-protect", "protect-gpio", 1);
+ gpio_hog_list(phy_reset, ARRAY_SIZE(phy_reset), "atl,phy-reset", "reset-gpio", 0);
+ gpio_hog(&led_en, "atl,led-enable", "enable-gpio", 1);
+
+#ifdef MTDPARTS_MTDOOPS
+ env_set("mtdoops", MTDPARTS_MTDOOPS);
+#endif
+
+ led_7seg_init(0xff);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+ puts("Board: " CONFIG_SYS_BOARD "\n");
+
+ return 0;
+}
+#endif
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_SYS_TEXT_BASE=0x00800000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_X530=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_DEBUG_UART_BASE=0xd0012000
+CONFIG_DEBUG_UART_CLOCK=250000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SILENT_CONSOLE=y
+CONFIG_SILENT_U_BOOT_ONLY=y
+CONFIG_SILENT_CONSOLE_UPDATE_ON_RELOC=y
+CONFIG_MISC_INIT_R=y
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_DEFAULT_DEVICE_TREE="armada-385-atl-x530"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_BLK=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_MISC=y
+# CONFIG_MMC is not set
+CONFIG_NAND=y
+CONFIG_NAND_PXA3XX=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_MTD_UBI=y
+CONFIG_PCI=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_DS1307=y
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550=y
+CONFIG_KIRKWOOD_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Allied Telesis Labs
+ */
+
+#ifndef _CONFIG_X530_H
+#define _CONFIG_X530_H
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
+
+/*
+ * NS16550 Configuration
+ */
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
+#if !defined(CONFIG_DM_SERIAL)
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE
+#endif
+
+/*
+ * Serial Port configuration
+ * The following definitions let you select what serial you want to use
+ * for your console driver.
+ */
+
+#define CONFIG_CONS_INDEX 1 /*Console on UART0 */
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_CMD_PCI
+
+/* NAND */
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+
+#define BBT_CUSTOM_SCAN
+#define BBT_CUSTOM_SCAN_PAGE 0
+#define BBT_CUSTOM_SCAN_POSITION 2048
+
+/* SPI NOR flash default params, used by sf commands */
+#define CONFIG_SF_DEFAULT_BUS 1
+#define CONFIG_SF_DEFAULT_SPEED 50000000
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
+
+#define MTDIDS_DEFAULT "nand0=nand"
+#define MTDPARTS_DEFAULT "mtdparts=nand:240M(user),8M(errlog),8M(nand-bbt)"
+#define MTDPARTS_MTDOOPS "errlog"
+
+/* Partition support */
+
+/* Additional FS support/configuration */
+
+/* USB/EHCI configuration */
+#define CONFIG_EHCI_IS_TDI
+
+/* Environment in SPI NOR flash */
+#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
+#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */
+#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
+#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */
+#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET
+
+#define CONFIG_PHY_MARVELL /* there is a marvell phy */
+#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
+
+/* PCIe support */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_PCI_MVEBU
+#define CONFIG_PCI_SCAN_SHOW
+#endif
+
+/* NAND */
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_LZO
+#define CONFIG_MTD_DEVICE
+#define CONFIG_CMD_MTDPARTS
+
+#define CONFIG_SYS_MALLOC_LEN (4 << 20)
+
+#include <asm/arch/config.h>
+
+/*
+ * Other required minimal configurations
+ */
+#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
+#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
+
+#define CONFIG_SYS_ALT_MEMTEST
+
+/* Keep device tree and initrd in low memory so the kernel can access them */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "fdt_high=0x10000000\0" \
+ "initrd_high=0x10000000\0"
+
+#define CONFIG_SYS_LOAD_ADDR 0x1000000
+#define CONFIG_UBI_PART user
+#define CONFIG_UBIFS_VOLUME user
+
+/* SPL */
+
+/* Defines for SPL */
+#define CONFIG_SPL_SIZE (140 << 10)
+#define CONFIG_SPL_TEXT_BASE 0x40000030
+#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030)
+
+#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
+#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MALLOC_SIMPLE
+#endif
+
+#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
+#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
+
+/* SPL related SPI defines */
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000
+#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
+
+#endif /* _CONFIG_X530_H */
projects / project / bcm63xx / u-boot.git / commitdiff