ifeq ($(LINUX_VERSION),3.9.11)
LINUX_KERNEL_MD5SUM:=edbf88eb7f7d34dbd5d3887726790755
endif
-ifeq ($(LINUX_VERSION),3.10.24)
- LINUX_KERNEL_MD5SUM:=4b1270dda167a0ee8bead2681e0a9965
+ifeq ($(LINUX_VERSION),3.10.26)
+ LINUX_KERNEL_MD5SUM:=9cdbcb3463b9753fafd97cddb38d1211
endif
ifeq ($(LINUX_VERSION),3.12.5)
LINUX_KERNEL_MD5SUM:=5b5330f657f562f7bef6da100a7133b1
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
SUBTARGETS:=generic ac49x
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
include $(INCLUDE_DIR)/target.mk
CPU_TYPE=34kc
SUBTARGETS:=generic nand mikrotik
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
include $(INCLUDE_DIR)/target.mk
FEATURES:=squashfs
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
include $(INCLUDE_DIR)/target.mk
MAINTAINER:=Hauke Mehrtens <hauke@hauke-m.de>
CPU_TYPE:=cortex-a9
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
include $(INCLUDE_DIR)/target.mk
CPU_TYPE:=arm1176jzf-s
CPU_SUBTYPE:=vfp
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += brcm2708-gpu-fw kmod-usb-hid kmod-sound-core kmod-sound-arm-bcm2835
FEATURES:=squashfs usb pcmcia
MAINTAINER:=Hauke Mehrtens <hauke@hauke-m.de>
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += swconfig kmod-diag wpad-mini nvram
BOARDNAME:=Broadcom BCM63xx
SUBTARGETS:=generic smp
FEATURES:=squashfs usb atm pci pcmcia
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
include $(INCLUDE_DIR)/target.mk
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
-@@ -1091,7 +1091,8 @@ static int m25p_probe(struct spi_device
+@@ -1092,7 +1092,8 @@ static int m25p_probe(struct spi_device
/* partitions should match sector boundaries; and it may be good to
* use readonly partitions for writeprotected sectors (BP2..BP0).
*/
/*
* Write an address range to the flash chip. Data must be written in
* FLASH_PAGESIZE chunks. The address range may be any size provided
-@@ -986,6 +1008,9 @@ static int m25p_probe(struct spi_device
+@@ -987,6 +1009,9 @@ static int m25p_probe(struct spi_device
return -ENOMEM;
}
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
-@@ -975,6 +975,9 @@ static int m25p_probe(struct spi_device
+@@ -976,6 +976,9 @@ static int m25p_probe(struct spi_device
dev_warn(&spi->dev, "unrecognized id %s\n", data->type);
}
FEATURES:=squashfs
CPU_TYPE:=fa526
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
include $(INCLUDE_DIR)/target.mk
return 0;
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
-@@ -289,7 +289,6 @@ static void mips_dma_sync_single_for_cpu
+@@ -293,7 +293,6 @@ static void mips_dma_sync_single_for_cpu
static void mips_dma_sync_single_for_device(struct device *dev,
dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
{
if (!plat_device_is_coherent(dev))
__dma_sync(dma_addr_to_page(dev, dma_handle),
dma_handle & ~PAGE_MASK, size, direction);
-@@ -323,7 +322,7 @@ static void mips_dma_sync_sg_for_device(
+@@ -327,7 +326,7 @@ static void mips_dma_sync_sg_for_device(
int mips_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
}
int mips_dma_supported(struct device *dev, u64 mask)
-@@ -336,7 +335,6 @@ void dma_cache_sync(struct device *dev,
+@@ -340,7 +339,6 @@ void dma_cache_sync(struct device *dev,
{
BUG_ON(direction == DMA_NONE);
int hw_coherentio = 0; /* Actual hardware supported DMA coherency setting. */
static int __init setcoherentio(char *str)
-@@ -44,26 +44,6 @@ static int __init setnocoherentio(char *
+@@ -44,13 +44,6 @@ static int __init setnocoherentio(char *
early_param("nocoherentio", setnocoherentio);
#endif
- plat_dma_addr_to_phys(dev, dma_addr) >> PAGE_SHIFT);
-}
-
--/*
-- * Warning on the terminology - Linux calls an uncached area coherent;
-- * MIPS terminology calls memory areas with hardware maintained coherency
-- * coherent.
-- */
--
--static inline int cpu_is_noncoherent_r10000(struct device *dev)
--{
-- return !plat_device_is_coherent(dev) &&
-- (current_cpu_type() == CPU_R10000 ||
-- current_cpu_type() == CPU_R12000);
--}
--
- static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
- {
- gfp_t dma_flag;
-@@ -119,8 +99,9 @@ void *dma_alloc_noncoherent(struct devic
+ /*
+ * The affected CPUs below in 'cpu_needs_post_dma_flush()' can
+ * speculatively fill random cachelines with stale data at any time,
+@@ -123,8 +116,9 @@ void *dma_alloc_noncoherent(struct devic
}
EXPORT_SYMBOL(dma_alloc_noncoherent);
{
void *ret;
-@@ -144,6 +125,7 @@ static void *mips_dma_alloc_coherent(str
+@@ -148,6 +142,7 @@ static void *mips_dma_alloc_coherent(str
return ret;
}
void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr,
-@@ -154,8 +136,8 @@ void dma_free_noncoherent(struct device
+@@ -158,8 +153,8 @@ void dma_free_noncoherent(struct device
}
EXPORT_SYMBOL(dma_free_noncoherent);
{
unsigned long addr = (unsigned long) vaddr;
int order = get_order(size);
-@@ -170,6 +152,7 @@ static void mips_dma_free_coherent(struc
+@@ -174,6 +169,7 @@ static void mips_dma_free_coherent(struc
free_pages(addr, get_order(size));
}
static inline void __dma_sync_virtual(void *addr, size_t size,
enum dma_data_direction direction)
-@@ -198,8 +181,8 @@ static inline void __dma_sync_virtual(vo
+@@ -202,8 +198,8 @@ static inline void __dma_sync_virtual(vo
* If highmem is not configured then the bulk of this loop gets
* optimized out.
*/
{
size_t left = size;
-@@ -228,109 +211,7 @@ static inline void __dma_sync(struct pag
- left -= len;
+@@ -233,108 +229,7 @@ static inline void __dma_sync(struct pag
} while (left);
}
--
+
-static void mips_dma_unmap_page(struct device *dev, dma_addr_t dma_addr,
- size_t size, enum dma_data_direction direction, struct dma_attrs *attrs)
-{
-- if (cpu_is_noncoherent_r10000(dev))
+- if (cpu_needs_post_dma_flush(dev))
- __dma_sync(dma_addr_to_page(dev, dma_addr),
- dma_addr & ~PAGE_MASK, size, direction);
-
-static void mips_dma_sync_single_for_cpu(struct device *dev,
- dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
-{
-- if (cpu_is_noncoherent_r10000(dev))
+- if (cpu_needs_post_dma_flush(dev))
- __dma_sync(dma_addr_to_page(dev, dma_handle),
- dma_handle & ~PAGE_MASK, size, direction);
-}
-
- /* Make sure that gcc doesn't leave the empty loop body. */
- for (i = 0; i < nelems; i++, sg++) {
-- if (cpu_is_noncoherent_r10000(dev))
+- if (cpu_needs_post_dma_flush(dev))
- __dma_sync(sg_page(sg), sg->offset, sg->length,
- direction);
- }
void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction)
-@@ -343,23 +224,10 @@ void dma_cache_sync(struct device *dev,
+@@ -347,23 +242,10 @@ void dma_cache_sync(struct device *dev,
EXPORT_SYMBOL(dma_cache_sync);
* When we die, we re-parent all our children, and try to:
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
-@@ -3707,6 +3707,7 @@ int can_nice(const struct task_struct *p
+@@ -3719,6 +3719,7 @@ int can_nice(const struct task_struct *p
return (nice_rlim <= task_rlimit(p, RLIMIT_NICE) ||
capable(CAP_SYS_NICE));
}
CPU_SUBTYPE:=vfpv3
MAINTAINER:=Luka Perkov <luka@openwrt.org>
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
include $(INCLUDE_DIR)/target.mk
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
-@@ -231,6 +231,73 @@ int of_pci_address_to_resource(struct de
+@@ -223,6 +223,73 @@ int of_pci_address_to_resource(struct de
return __of_address_to_resource(dev, addrp, size, flags, NULL, r);
}
EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
SUBTARGETS=generic harddisk
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
include $(INCLUDE_DIR)/target.mk
/* Get the HEAD */
skb = kmem_cache_alloc_node(cache, gfp_mask & ~__GFP_DMA, node);
-@@ -1085,6 +1088,10 @@ int pskb_expand_head(struct sk_buff *skb
+@@ -1082,6 +1085,10 @@ int pskb_expand_head(struct sk_buff *skb
if (skb_shared(skb))
BUG();
CPU_TYPE:=xscale
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
include $(INCLUDE_DIR)/target.mk
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
-@@ -231,6 +231,73 @@ int of_pci_address_to_resource(struct de
+@@ -223,6 +223,73 @@ int of_pci_address_to_resource(struct de
return __of_address_to_resource(dev, addrp, size, flags, NULL, r);
}
EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
FEATURES:=squashfs
SUBTARGETS=xway xrx200 ase falcon
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
CPU_TYPE:=mips32r2
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
-@@ -925,10 +925,13 @@ static int m25p_probe(struct spi_device
+@@ -926,10 +926,13 @@ static int m25p_probe(struct spi_device
unsigned i;
struct mtd_part_parser_data ppdata;
struct device_node __maybe_unused *np = spi->dev.of_node;
#endif
/* Platform data helps sort out which chip type we have, as
-@@ -1004,6 +1007,8 @@ static int m25p_probe(struct spi_device
+@@ -1005,6 +1008,8 @@ static int m25p_probe(struct spi_device
if (data && data->name)
flash->mtd.name = data->name;
INITRAMFS_EXTRA_FILES:=
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
DEVICE_TYPE:=developerboard
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
SUBTARGETS=generic p1020
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
include $(INCLUDE_DIR)/target.mk
CPU_SUBTYPE:=vfpv3
MAINTAINER:=Luka Perkov <luka@openwrt.org>
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
include $(INCLUDE_DIR)/target.mk
CPU_CFLAGS_octeon:=-march=octeon
MAINTAINER:=John Crispin <blogic@openwrt.org>
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
include $(INCLUDE_DIR)/target.mk
CPU_TYPE:=405
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
include $(INCLUDE_DIR)/target.mk
CPU_TYPE:=440
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
include $(INCLUDE_DIR)/target.mk
SUBTARGETS:=rt305x mt7620a mt7620n mt7621 rt3883 rt288x
FEATURES:=squashfs gpio
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES+=\
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
-@@ -925,10 +925,13 @@ static int m25p_probe(struct spi_device
+@@ -926,10 +926,13 @@ static int m25p_probe(struct spi_device
unsigned i;
struct mtd_part_parser_data ppdata;
struct device_node __maybe_unused *np = spi->dev.of_node;
#endif
/* Platform data helps sort out which chip type we have, as
-@@ -1004,6 +1007,8 @@ static int m25p_probe(struct spi_device
+@@ -1005,6 +1008,8 @@ static int m25p_probe(struct spi_device
if (data && data->name)
flash->mtd.name = data->name;
create mode 100644 drivers/net/ethernet/ralink/soc_rt305x.c
create mode 100644 drivers/net/ethernet/ralink/soc_rt3883.c
-Index: linux-3.10.21/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h 2013-12-09 13:26:42.320125202 +0100
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
@@ -0,0 +1,27 @@
+/*
+ * Ralink RT305x SoC platform device registration
+};
+
+#endif /* _RT305X_ESW_PLATFORM_H */
-Index: linux-3.10.21/arch/mips/ralink/rt305x.c
-===================================================================
---- linux-3.10.21.orig/arch/mips/ralink/rt305x.c 2013-11-29 20:12:03.000000000 +0100
-+++ linux-3.10.21/arch/mips/ralink/rt305x.c 2013-12-09 14:04:34.200179338 +0100
-@@ -221,6 +221,7 @@
+--- a/arch/mips/ralink/rt305x.c
++++ b/arch/mips/ralink/rt305x.c
+@@ -221,6 +221,7 @@ void __init ralink_clk_init(void)
}
ralink_clk_add("cpu", cpu_rate);
ralink_clk_add("10000b00.spi", sys_rate);
ralink_clk_add("10000100.timer", wdt_rate);
ralink_clk_add("10000120.watchdog", wdt_rate);
-Index: linux-3.10.21/drivers/net/ethernet/Kconfig
-===================================================================
---- linux-3.10.21.orig/drivers/net/ethernet/Kconfig 2013-11-29 20:12:03.000000000 +0100
-+++ linux-3.10.21/drivers/net/ethernet/Kconfig 2013-12-09 13:26:42.324125203 +0100
-@@ -135,6 +135,7 @@
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -135,6 +135,7 @@ config ETHOC
source "drivers/net/ethernet/packetengines/Kconfig"
source "drivers/net/ethernet/pasemi/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/realtek/Kconfig"
source "drivers/net/ethernet/renesas/Kconfig"
source "drivers/net/ethernet/rdc/Kconfig"
-Index: linux-3.10.21/drivers/net/ethernet/Makefile
-===================================================================
---- linux-3.10.21.orig/drivers/net/ethernet/Makefile 2013-11-29 20:12:03.000000000 +0100
-+++ linux-3.10.21/drivers/net/ethernet/Makefile 2013-12-09 13:26:42.324125203 +0100
-@@ -53,6 +53,7 @@
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -53,6 +53,7 @@ obj-$(CONFIG_ETHOC) += ethoc.o
obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/
obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
obj-$(CONFIG_SH_ETH) += renesas/
obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
-Index: linux-3.10.21/drivers/net/ethernet/ralink/Kconfig
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/Kconfig 2013-12-09 13:26:42.324125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/Kconfig
@@ -0,0 +1,32 @@
+config NET_RALINK
+ tristate "Ralink RT288X/RT3X5X/RT3662/RT3883/MT7620 ethernet driver"
+ select PHYLIB
+ select SWCONFIG
+endif
-Index: linux-3.10.21/drivers/net/ethernet/ralink/Makefile
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/Makefile 2013-12-09 13:26:42.324125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/Makefile
@@ -0,0 +1,18 @@
+#
+# Makefile for the Ralink SoCs built-in ethernet macs
+ralink-eth-$(CONFIG_SOC_MT7620) += soc_mt7620.o
+
+obj-$(CONFIG_NET_RALINK) += ralink-eth.o
-Index: linux-3.10.21/drivers/net/ethernet/ralink/esw_rt3052.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/esw_rt3052.c 2013-12-09 13:26:42.328125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/esw_rt3052.c
@@ -0,0 +1,1463 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+{
+ platform_driver_unregister(&esw_driver);
+}
-Index: linux-3.10.21/drivers/net/ethernet/ralink/esw_rt3052.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/esw_rt3052.h 2013-12-09 13:26:42.328125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/esw_rt3052.h
@@ -0,0 +1,32 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+
+#endif
+#endif
-Index: linux-3.10.21/drivers/net/ethernet/ralink/gsw_mt7620a.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/gsw_mt7620a.c 2013-12-09 13:26:42.328125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/gsw_mt7620a.c
@@ -0,0 +1,566 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+
+ return 0;
+}
-Index: linux-3.10.21/drivers/net/ethernet/ralink/gsw_mt7620a.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/gsw_mt7620a.h 2013-12-09 13:26:42.328125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/gsw_mt7620a.h
@@ -0,0 +1,30 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+extern int mt7620a_has_carrier(struct fe_priv *priv);
+
+#endif
-Index: linux-3.10.21/drivers/net/ethernet/ralink/mdio.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/mdio.c 2013-12-09 13:26:42.328125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mdio.c
@@ -0,0 +1,244 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ of_node_put(priv->mii_bus->dev.of_node);
+ kfree(priv->mii_bus);
+}
-Index: linux-3.10.21/drivers/net/ethernet/ralink/mdio.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/mdio.h 2013-12-09 13:26:42.328125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mdio.h
@@ -0,0 +1,29 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+static inline void fe_mdio_cleanup(struct fe_priv *priv) {}
+#endif
+#endif
-Index: linux-3.10.21/drivers/net/ethernet/ralink/mdio_rt2880.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/mdio_rt2880.c 2013-12-09 13:26:42.328125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mdio_rt2880.c
@@ -0,0 +1,232 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+
+ return;
+}
-Index: linux-3.10.21/drivers/net/ethernet/ralink/mdio_rt2880.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/mdio_rt2880.h 2013-12-09 13:26:42.328125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mdio_rt2880.h
@@ -0,0 +1,26 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+void rt2880_port_init(struct fe_priv *priv, struct device_node *np);
+
+#endif
-Index: linux-3.10.21/drivers/net/ethernet/ralink/ralink_soc_eth.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/ralink_soc_eth.c 2013-12-09 14:01:00.060174130 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/ralink_soc_eth.c
@@ -0,0 +1,846 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("Ethernet driver for Ralink SoC");
-Index: linux-3.10.21/drivers/net/ethernet/ralink/ralink_soc_eth.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/ralink_soc_eth.h 2013-12-09 13:26:42.332125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/ralink_soc_eth.h
@@ -0,0 +1,384 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+u32 fe_r32(unsigned reg);
+
+#endif /* FE_ETH_H */
-Index: linux-3.10.21/drivers/net/ethernet/ralink/soc_mt7620.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/soc_mt7620.c 2013-12-09 13:26:42.332125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/soc_mt7620.c
@@ -0,0 +1,172 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+};
+
+MODULE_DEVICE_TABLE(of, of_fe_match);
-Index: linux-3.10.21/drivers/net/ethernet/ralink/soc_rt2880.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/soc_rt2880.c 2013-12-09 13:26:42.332125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/soc_rt2880.c
@@ -0,0 +1,51 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+};
+
+MODULE_DEVICE_TABLE(of, of_fe_match);
-Index: linux-3.10.21/drivers/net/ethernet/ralink/soc_rt305x.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/soc_rt305x.c 2013-12-09 13:26:42.332125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/soc_rt305x.c
@@ -0,0 +1,113 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+};
+
+MODULE_DEVICE_TABLE(of, of_fe_match);
-Index: linux-3.10.21/drivers/net/ethernet/ralink/soc_rt3883.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/soc_rt3883.c 2013-12-09 13:26:42.332125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/soc_rt3883.c
@@ -0,0 +1,60 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+
+MODULE_DEVICE_TABLE(of, of_fe_match);
+
-Index: linux-3.10.21/drivers/net/ethernet/ralink/mt7530.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/mt7530.c 2013-12-09 13:26:42.336125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mt7530.c
@@ -0,0 +1,467 @@
+/*
+ * This program is free software; you can redistribute it and/or
+
+ return 0;
+}
-Index: linux-3.10.21/drivers/net/ethernet/ralink/mt7530.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/net/ethernet/ralink/mt7530.h 2013-12-09 13:26:42.336125203 +0100
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mt7530.h
@@ -0,0 +1,20 @@
+/*
+ * This program is free software; you can redistribute it and/or
drivers/mtd/devices/m25p80.c | 127 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 127 insertions(+)
-Index: linux-3.10.21/drivers/mtd/devices/m25p80.c
-===================================================================
---- linux-3.10.21.orig/drivers/mtd/devices/m25p80.c 2013-12-09 19:34:40.828651303 +0100
-+++ linux-3.10.21/drivers/mtd/devices/m25p80.c 2013-12-09 19:40:37.636659793 +0100
-@@ -392,6 +392,57 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -392,6 +392,57 @@ static int m25p80_read(struct mtd_info *
return 0;
}
/*
* Write an address range to the flash chip. Data must be written in
* FLASH_PAGESIZE chunks. The address range may be any size provided
-@@ -479,6 +530,76 @@
+@@ -479,6 +530,76 @@ static int m25p80_write(struct mtd_info
return 0;
}
static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
-@@ -1057,6 +1178,12 @@
+@@ -1058,6 +1179,12 @@ static int m25p_probe(struct spi_device
flash->fast_read = true;
#endif
3 files changed, 603 insertions(+)
create mode 100644 drivers/dma/ralink-gdma.c
-Index: linux-3.10.18/drivers/dma/Kconfig
-===================================================================
---- linux-3.10.18.orig/drivers/dma/Kconfig 2013-11-04 13:31:29.000000000 +0100
-+++ linux-3.10.18/drivers/dma/Kconfig 2013-12-04 17:52:32.852756567 +0100
-@@ -312,6 +312,12 @@
+--- a/drivers/dma/Kconfig
++++ b/drivers/dma/Kconfig
+@@ -312,6 +312,12 @@ config MMP_PDMA
help
Support the MMP PDMA engine for PXA and MMP platfrom.
config DMA_ENGINE
bool
-Index: linux-3.10.18/drivers/dma/ralink-gdma.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.18/drivers/dma/ralink-gdma.c 2013-12-05 21:17:22.245128605 +0100
+--- /dev/null
++++ b/drivers/dma/ralink-gdma.c
@@ -0,0 +1,577 @@
+/*
+ * Copyright (C) 2013, Lars-Peter Clausen <lars@metafoo.de>
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("GDMA4740 DMA driver");
+MODULE_LICENSE("GPLv2");
-Index: linux-3.10.18/drivers/dma/dmaengine.c
-===================================================================
---- linux-3.10.18.orig/drivers/dma/dmaengine.c 2013-11-04 13:31:29.000000000 +0100
-+++ linux-3.10.18/drivers/dma/dmaengine.c 2013-12-04 17:52:32.856756568 +0100
-@@ -504,6 +504,32 @@
+--- a/drivers/dma/dmaengine.c
++++ b/drivers/dma/dmaengine.c
+@@ -504,6 +504,32 @@ static struct dma_chan *private_candidat
}
/**
* dma_request_channel - try to allocate an exclusive channel
* @mask: capabilities that the channel must satisfy
* @fn: optional callback to disposition available channels
-Index: linux-3.10.18/include/linux/dmaengine.h
-===================================================================
---- linux-3.10.18.orig/include/linux/dmaengine.h 2013-11-04 13:31:29.000000000 +0100
-+++ linux-3.10.18/include/linux/dmaengine.h 2013-12-04 17:52:32.856756568 +0100
-@@ -999,6 +999,7 @@
+--- a/include/linux/dmaengine.h
++++ b/include/linux/dmaengine.h
+@@ -999,6 +999,7 @@ static inline void dma_release_channel(s
int dma_async_device_register(struct dma_device *device);
void dma_async_device_unregister(struct dma_device *device);
void dma_run_dependencies(struct dma_async_tx_descriptor *tx);
struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type);
struct dma_chan *net_dma_find_channel(void);
#define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y)
-Index: linux-3.10.18/drivers/dma/Makefile
-===================================================================
---- linux-3.10.18.orig/drivers/dma/Makefile 2013-11-04 13:31:29.000000000 +0100
-+++ linux-3.10.18/drivers/dma/Makefile 2013-12-04 17:52:32.856756568 +0100
-@@ -38,3 +38,4 @@
+--- a/drivers/dma/Makefile
++++ b/drivers/dma/Makefile
+@@ -38,3 +38,4 @@ obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o
obj-$(CONFIG_DMA_OMAP) += omap-dma.o
obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o
create mode 100644 sound/soc/ralink/mt7620-pcm.c
create mode 100644 sound/soc/ralink/mt7620-wm8960.c
-Index: linux-3.10.18/sound/soc/Kconfig
-===================================================================
---- linux-3.10.18.orig/sound/soc/Kconfig 2013-11-04 13:31:29.000000000 +0100
-+++ linux-3.10.18/sound/soc/Kconfig 2013-12-04 17:52:32.884756569 +0100
-@@ -48,6 +48,7 @@
+--- a/sound/soc/Kconfig
++++ b/sound/soc/Kconfig
+@@ -48,6 +48,7 @@ source "sound/soc/kirkwood/Kconfig"
source "sound/soc/mid-x86/Kconfig"
source "sound/soc/mxs/Kconfig"
source "sound/soc/pxa/Kconfig"
source "sound/soc/samsung/Kconfig"
source "sound/soc/s6000/Kconfig"
source "sound/soc/sh/Kconfig"
-Index: linux-3.10.18/sound/soc/Makefile
-===================================================================
---- linux-3.10.18.orig/sound/soc/Makefile 2013-11-04 13:31:29.000000000 +0100
-+++ linux-3.10.18/sound/soc/Makefile 2013-12-04 17:52:32.884756569 +0100
-@@ -26,6 +26,7 @@
+--- a/sound/soc/Makefile
++++ b/sound/soc/Makefile
+@@ -26,6 +26,7 @@ obj-$(CONFIG_SND_SOC) += nuc900/
obj-$(CONFIG_SND_SOC) += omap/
obj-$(CONFIG_SND_SOC) += kirkwood/
obj-$(CONFIG_SND_SOC) += pxa/
obj-$(CONFIG_SND_SOC) += samsung/
obj-$(CONFIG_SND_SOC) += s6000/
obj-$(CONFIG_SND_SOC) += sh/
-Index: linux-3.10.18/sound/soc/ralink/Kconfig
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.18/sound/soc/ralink/Kconfig 2013-12-04 17:52:32.884756569 +0100
+--- /dev/null
++++ b/sound/soc/ralink/Kconfig
@@ -0,0 +1,15 @@
+config SND_MT7620_SOC_I2S
+ depends on SOC_MT7620 && SND_SOC
+ help
+ Say Y if you want to add support for ASoC audio on the Qi LB60 board
+ a.k.a Qi Ben NanoNote.
-Index: linux-3.10.18/sound/soc/ralink/Makefile
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.18/sound/soc/ralink/Makefile 2013-12-04 17:52:32.884756569 +0100
+--- /dev/null
++++ b/sound/soc/ralink/Makefile
@@ -0,0 +1,11 @@
+#
+# Jz4740 Platform Support
+snd-soc-mt7620-wm8960-objs := mt7620-wm8960.o
+
+obj-$(CONFIG_SND_MT7620_SOC_WM8960) += snd-soc-mt7620-wm8960.o
-Index: linux-3.10.18/sound/soc/ralink/mt7620-i2s.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.18/sound/soc/ralink/mt7620-i2s.c 2013-12-05 21:18:46.913130624 +0100
+--- /dev/null
++++ b/sound/soc/ralink/mt7620-i2s.c
@@ -0,0 +1,466 @@
+/*
+ * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+MODULE_DESCRIPTION("Ingenic JZ4740 SoC I2S driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mt7620-i2s");
-Index: linux-3.10.18/sound/soc/ralink/mt7620-wm8960.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.18/sound/soc/ralink/mt7620-wm8960.c 2013-12-04 17:52:32.884756569 +0100
+--- /dev/null
++++ b/sound/soc/ralink/mt7620-wm8960.c
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
+MODULE_DESCRIPTION("ALSA SoC QI LB60 Audio support");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qi-lb60-audio");
-Index: linux-3.10.18/arch/mips/ralink/of.c
-===================================================================
---- linux-3.10.18.orig/arch/mips/ralink/of.c 2013-12-04 17:52:32.736756565 +0100
-+++ linux-3.10.18/arch/mips/ralink/of.c 2013-12-04 17:52:32.884756569 +0100
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
@@ -15,6 +15,7 @@
#include <linux/of_fdt.h>
#include <linux/kernel.h>
__iomem void *rt_memc_membase;
extern struct boot_param_header __dtb_start;
-Index: linux-3.10.18/sound/soc/soc-io.c
-===================================================================
---- linux-3.10.18.orig/sound/soc/soc-io.c 2013-11-04 13:31:29.000000000 +0100
-+++ linux-3.10.18/sound/soc/soc-io.c 2013-12-04 17:52:32.888756569 +0100
+--- a/sound/soc/soc-io.c
++++ b/sound/soc/soc-io.c
@@ -19,7 +19,6 @@
#include <trace/events/asoc.h>
static int hw_write(struct snd_soc_codec *codec, unsigned int reg,
unsigned int value)
{
-@@ -161,12 +160,3 @@
+@@ -161,12 +160,3 @@ int snd_soc_codec_set_cache_io(struct sn
return PTR_RET(codec->control_data);
}
EXPORT_SYMBOL_GPL(snd_soc_codec_set_cache_io);
-Index: linux-3.10.21/drivers/spi/spi-rt2880.c
-===================================================================
---- linux-3.10.21.orig/drivers/spi/spi-rt2880.c 2013-12-09 20:17:54.380713104 +0100
-+++ linux-3.10.21/drivers/spi/spi-rt2880.c 2013-12-09 20:35:08.004737585 +0100
+--- a/drivers/spi/spi-rt2880.c
++++ b/drivers/spi/spi-rt2880.c
@@ -21,8 +21,11 @@
#include <linux/io.h>
#include <linux/reset.h>
struct rt2880_spi {
struct spi_master *master;
void __iomem *base;
-@@ -70,6 +92,8 @@
+@@ -70,6 +92,8 @@ struct rt2880_spi {
unsigned int speed;
struct clk *clk;
spinlock_t lock;
};
static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi)
-@@ -149,6 +173,17 @@
+@@ -149,6 +173,17 @@ static int rt2880_spi_baudrate_set(struc
return 0;
}
/*
* called only when no transfer is active on the bus
*/
-@@ -164,7 +199,7 @@
+@@ -164,7 +199,7 @@ rt2880_spi_setup_transfer(struct spi_dev
if (rs->speed != speed) {
dev_dbg(&spi->dev, "speed_hz:%u\n", speed);
if (rc)
return rc;
}
-@@ -180,6 +215,17 @@
+@@ -180,6 +215,17 @@ static void rt2880_spi_set_cs(struct rt2
rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
}
static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs)
{
int i;
-@@ -198,8 +244,26 @@
+@@ -198,8 +244,26 @@ static inline int rt2880_spi_wait_till_r
return -ETIMEDOUT;
}
{
struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
unsigned count = 0;
-@@ -239,6 +303,100 @@
+@@ -239,6 +303,100 @@ out:
return count;
}
static int rt2880_spi_transfer_one_message(struct spi_master *master,
struct spi_message *m)
{
-@@ -280,25 +438,25 @@
+@@ -280,25 +438,25 @@ static int rt2880_spi_transfer_one_messa
}
if (!cs_active) {
m->status = status;
spi_finalize_current_message(master);
-@@ -334,8 +492,41 @@
+@@ -334,8 +492,41 @@ static void rt2880_spi_reset(struct rt28
rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA);
}
struct spi_master *master;
struct rt2880_spi *rs;
unsigned long flags;
-@@ -344,6 +535,10 @@
+@@ -344,6 +535,10 @@ static int rt2880_spi_probe(struct platf
int status = 0;
struct clk *clk;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(base))
-@@ -382,12 +577,13 @@
+@@ -382,12 +577,13 @@ static int rt2880_spi_probe(struct platf
rs->clk = clk;
rs->master = master;
rs->sys_freq = clk_get_rate(rs->clk);
return spi_register_master(master);
}
-@@ -408,12 +604,6 @@
+@@ -408,12 +604,6 @@ static int rt2880_spi_remove(struct plat
MODULE_ALIAS("platform:" DRIVER_NAME);
arch/mips/include/asm/gic.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
-index b2e3e93..2902d93 100644
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -19,7 +19,7 @@
#define MSK(n) ((1 << (n)) - 1)
#define REG32(addr) (*(volatile unsigned int *) (addr))
---
-1.7.10.4
-
create mode 100644 arch/mips/ralink/malta-amon.c
create mode 100644 arch/mips/ralink/mt7621.c
-Index: linux-3.10.21/arch/mips/include/asm/mach-ralink/mt7621.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/arch/mips/include/asm/mach-ralink/mt7621.h 2013-12-09 19:52:51.752677298 +0100
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/mt7621.h
@@ -0,0 +1,39 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8)
+
+#endif
-Index: linux-3.10.21/arch/mips/ralink/Kconfig
-===================================================================
---- linux-3.10.21.orig/arch/mips/ralink/Kconfig 2013-12-09 19:51:55.600675960 +0100
-+++ linux-3.10.21/arch/mips/ralink/Kconfig 2013-12-09 19:52:51.756677296 +0100
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
@@ -1,5 +1,10 @@
if RALINK
config CLKEVT_RT3352
bool "Systick Clockevent source"
depends on SOC_RT305X || SOC_MT7620
-@@ -35,6 +40,15 @@
+@@ -35,6 +40,15 @@ choice
select USB_ARCH_HAS_EHCI
select HW_HAS_PCI
endchoice
choice
-@@ -62,6 +76,10 @@
+@@ -62,6 +76,10 @@ choice
bool "MT7620A eval kit"
depends on SOC_MT7620
endchoice
endif
-Index: linux-3.10.21/arch/mips/ralink/Makefile
-===================================================================
---- linux-3.10.21.orig/arch/mips/ralink/Makefile 2013-12-09 19:51:55.600675960 +0100
-+++ linux-3.10.21/arch/mips/ralink/Makefile 2013-12-09 19:52:51.756677296 +0100
+--- a/arch/mips/ralink/Makefile
++++ b/arch/mips/ralink/Makefile
@@ -6,7 +6,11 @@
# Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
# Copyright (C) 2013 John Crispin <blogic@openwrt.org>
obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
-@@ -16,6 +20,7 @@
+@@ -16,6 +20,7 @@ obj-$(CONFIG_SOC_RT288X) += rt288x.o
obj-$(CONFIG_SOC_RT305X) += rt305x.o
obj-$(CONFIG_SOC_RT3883) += rt3883.o
obj-$(CONFIG_SOC_MT7620) += mt7620.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-Index: linux-3.10.21/arch/mips/ralink/Platform
-===================================================================
---- linux-3.10.21.orig/arch/mips/ralink/Platform 2013-12-09 19:51:55.000000000 +0100
-+++ linux-3.10.21/arch/mips/ralink/Platform 2013-12-09 19:53:54.660678800 +0100
-@@ -26,3 +26,10 @@
+--- a/arch/mips/ralink/Platform
++++ b/arch/mips/ralink/Platform
+@@ -26,3 +26,10 @@ cflags-$(CONFIG_SOC_RT3883) += -I$(srctr
# Ralink MT7620
#
load-$(CONFIG_SOC_MT7620) += 0xffffffff80000000
+#
+load-$(CONFIG_SOC_MT7621) += 0xffffffff80001000
+cflags-$(CONFIG_SOC_MT7620) += -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7621
-Index: linux-3.10.21/arch/mips/ralink/irq-gic.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/arch/mips/ralink/irq-gic.c 2013-12-09 19:52:51.756677296 +0100
+--- /dev/null
++++ b/arch/mips/ralink/irq-gic.c
@@ -0,0 +1,255 @@
+#include <linux/init.h>
+#include <linux/sched.h>
+{
+ of_irq_init(of_irq_ids);
+}
-Index: linux-3.10.21/arch/mips/ralink/malta-amon.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/arch/mips/ralink/malta-amon.c 2013-12-09 19:52:51.756677296 +0100
+--- /dev/null
++++ b/arch/mips/ralink/malta-amon.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ smp_rmb(); /* Target will be updating flags soon */
+ pr_debug("launch: cpu%d gone!\n", cpu);
+}
-Index: linux-3.10.21/arch/mips/ralink/mt7621.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/arch/mips/ralink/mt7621.c 2013-12-09 19:52:51.760677296 +0100
+--- /dev/null
++++ b/arch/mips/ralink/mt7621.c
@@ -0,0 +1,186 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
arch/mips/ralink/early_printk.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
-Index: linux-3.10.21/arch/mips/ralink/early_printk.c
-===================================================================
---- linux-3.10.21.orig/arch/mips/ralink/early_printk.c 2013-11-29 20:12:03.000000000 +0100
-+++ linux-3.10.21/arch/mips/ralink/early_printk.c 2013-12-09 20:11:51.600704498 +0100
+--- a/arch/mips/ralink/early_printk.c
++++ b/arch/mips/ralink/early_printk.c
@@ -13,6 +13,8 @@
#ifdef CONFIG_SOC_RT288X
#else
#define EARLY_UART_BASE 0x10000c00
#endif
-@@ -40,9 +42,13 @@
+@@ -40,9 +42,13 @@ static inline u32 uart_r32(unsigned reg)
void prom_putchar(unsigned char ch)
{
2 files changed, 798 insertions(+)
create mode 100644 arch/mips/pci/pci-mt7621.c
-diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
-index 719e455..80886fe 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
-@@ -42,6 +42,7 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
- obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
- obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
+@@ -44,6 +44,7 @@ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o
+ obj-$(CONFIG_SOC_MT7620) += pci-mt7620a.o
+ obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o
obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
+obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
-diff --git a/arch/mips/pci/pci-mt7621.c b/arch/mips/pci/pci-mt7621.c
-new file mode 100644
-index 0000000..0b58fce
--- /dev/null
+++ b/arch/mips/pci/pci-mt7621.c
@@ -0,0 +1,797 @@
+{
+ return 0;
+}
---
-1.7.10.4
-
3 files changed, 193 insertions(+)
create mode 100644 drivers/watchdog/mt7621_wdt.c
-Index: linux-3.10.21/drivers/watchdog/Kconfig
-===================================================================
---- linux-3.10.21.orig/drivers/watchdog/Kconfig 2013-12-09 19:56:09.360682007 +0100
-+++ linux-3.10.21/drivers/watchdog/Kconfig 2013-12-09 19:59:20.636686594 +0100
-@@ -1116,7 +1116,14 @@
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -1116,7 +1116,14 @@ config LANTIQ_WDT
config RALINK_WDT
tristate "Ralink SoC watchdog"
select WATCHDOG_CORE
help
Hardware driver for the Ralink SoC Watchdog Timer.
-Index: linux-3.10.21/drivers/watchdog/Makefile
-===================================================================
---- linux-3.10.21.orig/drivers/watchdog/Makefile 2013-12-09 19:56:09.360682007 +0100
-+++ linux-3.10.21/drivers/watchdog/Makefile 2013-12-09 19:56:09.752682016 +0100
-@@ -136,6 +136,7 @@
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -136,6 +136,7 @@ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
# PARISC Architecture
-Index: linux-3.10.21/drivers/watchdog/mt7621_wdt.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/watchdog/mt7621_wdt.c 2013-12-09 19:56:09.752682016 +0100
+--- /dev/null
++++ b/drivers/watchdog/mt7621_wdt.c
@@ -0,0 +1,185 @@
+/*
+ * Ralink RT288x/RT3xxx/MT76xx built-in hardware watchdog timer
4 files changed, 191 insertions(+)
create mode 100644 drivers/gpio/gpio-mt7621.c
-Index: linux-3.10.21/drivers/gpio/Kconfig
-===================================================================
---- linux-3.10.21.orig/drivers/gpio/Kconfig 2013-12-09 19:56:09.376682007 +0100
-+++ linux-3.10.21/drivers/gpio/Kconfig 2013-12-09 19:58:35.372685422 +0100
-@@ -710,6 +710,12 @@
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -710,6 +710,12 @@ config GPIO_MSIC
Enable support for GPIO on intel MSIC controllers found in
intel MID devices
comment "USB GPIO expanders:"
config GPIO_VIPERBOARD
-Index: linux-3.10.21/drivers/gpio/Makefile
-===================================================================
---- linux-3.10.21.orig/drivers/gpio/Makefile 2013-12-09 19:56:09.376682007 +0100
-+++ linux-3.10.21/drivers/gpio/Makefile 2013-12-09 19:56:09.760682017 +0100
-@@ -88,3 +88,4 @@
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -88,3 +88,4 @@ obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x
obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o
obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o
obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o
+obj-$(CONFIG_GPIO_MT7621) += gpio-mt7621.o
-Index: linux-3.10.21/drivers/gpio/gpio-mt7621.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.21/drivers/gpio/gpio-mt7621.c 2013-12-09 19:56:09.760682017 +0100
+--- /dev/null
++++ b/drivers/gpio/gpio-mt7621.c
@@ -0,0 +1,183 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
create mode 100644 drivers/mtd/nand/nand_device_list.h
create mode 100644 drivers/mtd/nand/partition.h
-diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
-index d885298..51ba744 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
-@@ -538,4 +538,10 @@ config MTD_NAND_XWAY
+@@ -544,4 +544,10 @@ config MTD_NAND_XWAY
Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
to the External Bus Unit (EBU).
+ select MTD_NAND_ECC
+
endif # MTD_NAND
-diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
-index 542b568..c68c96c 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
-@@ -49,5 +49,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
+@@ -50,5 +50,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740
obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
+obj-$(CONFIG_MTK_MTD_NAND) += mtk_nand.o bmt.o
nand-objs := nand_base.o nand_bbt.o
-diff --git a/drivers/mtd/nand/bmt.c b/drivers/mtd/nand/bmt.c
-new file mode 100644
-index 0000000..0462871
--- /dev/null
+++ b/drivers/mtd/nand/bmt.c
@@ -0,0 +1,750 @@
+MODULE_AUTHOR("MediaTek");
+MODULE_DESCRIPTION("Bad Block mapping management for MediaTek NAND Flash Driver");
+#endif
-diff --git a/drivers/mtd/nand/bmt.h b/drivers/mtd/nand/bmt.h
-new file mode 100644
-index 0000000..2d30ea9
--- /dev/null
+++ b/drivers/mtd/nand/bmt.h
@@ -0,0 +1,80 @@
+unsigned short get_mapping_block_index(int index);
+
+#endif // #ifndef __BMT_H__
-diff --git a/drivers/mtd/nand/dev-nand.c b/drivers/mtd/nand/dev-nand.c
-new file mode 100644
-index 0000000..9fb5235
--- /dev/null
+++ b/drivers/mtd/nand/dev-nand.c
@@ -0,0 +1,63 @@
+ return retval;
+}
+arch_initcall(mtk_nand_register);
-diff --git a/drivers/mtd/nand/mt6575_typedefs.h b/drivers/mtd/nand/mt6575_typedefs.h
-new file mode 100644
-index 0000000..a7b9647
--- /dev/null
+++ b/drivers/mtd/nand/mt6575_typedefs.h
@@ -0,0 +1,340 @@
+
+#endif // _MT6575_TYPEDEFS_H
+
-diff --git a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c
-new file mode 100644
-index 0000000..00e150c
--- /dev/null
+++ b/drivers/mtd/nand/mtk_nand.c
@@ -0,0 +1,2304 @@
+module_init(mtk_nand_init);
+module_exit(mtk_nand_exit);
+MODULE_LICENSE("GPL");
-diff --git a/drivers/mtd/nand/mtk_nand.h b/drivers/mtd/nand/mtk_nand.h
-new file mode 100644
-index 0000000..6db88c4
--- /dev/null
+++ b/drivers/mtd/nand/mtk_nand.h
@@ -0,0 +1,452 @@
+extern u32 CFG_BLOCKSIZE;
+#endif
+#endif
-diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
-index d340b2f..d83655f 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
-@@ -90,7 +90,7 @@ static struct nand_ecclayout nand_oob_128 = {
+@@ -90,7 +90,7 @@ static struct nand_ecclayout nand_oob_12
.length = 78} }
};
static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops);
-@@ -128,7 +128,7 @@ static int check_offs_len(struct mtd_info *mtd,
+@@ -128,7 +128,7 @@ static int check_offs_len(struct mtd_inf
*
* Release chip lock and wake up anyone waiting on the device.
*/
{
struct nand_chip *chip = mtd->priv;
-@@ -736,7 +736,7 @@ static void panic_nand_get_device(struct nand_chip *chip,
+@@ -739,7 +739,7 @@ static void panic_nand_get_device(struct
*
* Get the device and lock it for exclusive access
*/
nand_get_device(struct mtd_info *mtd, int new_state)
{
struct nand_chip *chip = mtd->priv;
-diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
-index bc06196..da93baf 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
-@@ -1391,5 +1391,24 @@ int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs)
- return ret;
+@@ -1378,6 +1378,25 @@ int nand_isbad_bbt(struct mtd_info *mtd,
+ return 1;
}
+void nand_bbt_set(struct mtd_info *mtd, int page, int flag)
+
EXPORT_SYMBOL(nand_scan_bbt);
EXPORT_SYMBOL(nand_default_bbt);
-diff --git a/drivers/mtd/nand/nand_def.h b/drivers/mtd/nand/nand_def.h
-new file mode 100644
-index 0000000..82e957d
+ EXPORT_SYMBOL_GPL(nand_update_bbt);
--- /dev/null
+++ b/drivers/mtd/nand/nand_def.h
@@ -0,0 +1,123 @@
+#include "mt6575_typedefs.h"
+
+#endif /* __NAND_DEF_H__ */
-diff --git a/drivers/mtd/nand/nand_device_list.h b/drivers/mtd/nand/nand_device_list.h
-new file mode 100644
-index 0000000..4c36b3a
--- /dev/null
+++ b/drivers/mtd/nand/nand_device_list.h
@@ -0,0 +1,55 @@
+
+
+#endif
-diff --git a/drivers/mtd/nand/partition.h b/drivers/mtd/nand/partition.h
-new file mode 100644
-index 0000000..034e1af
--- /dev/null
+++ b/drivers/mtd/nand/partition.h
@@ -0,0 +1,115 @@
+//#endif
+#undef RECONFIG_PARTITION_SIZE
+
---
-1.7.10.4
-
-Index: linux-3.10.18/arch/mips/include/asm/mach-ralink/mt7620.h
-===================================================================
---- linux-3.10.18.orig/arch/mips/include/asm/mach-ralink/mt7620.h 2013-12-06 16:20:27.753388970 +0100
-+++ linux-3.10.18/arch/mips/include/asm/mach-ralink/mt7620.h 2013-12-06 16:21:14.021390074 +0100
+--- a/arch/mips/include/asm/mach-ralink/mt7620.h
++++ b/arch/mips/include/asm/mach-ralink/mt7620.h
@@ -101,4 +101,9 @@
#define MT7620_GPIO_MODE_EPHY 15
#define MT7620_GPIO_MODE_PA 20
-Index: linux-3.10.24/drivers/net/ethernet/ralink/ralink_soc_eth.c
-===================================================================
---- linux-3.10.24.orig/drivers/net/ethernet/ralink/ralink_soc_eth.c 2013-12-27 20:32:59.004068866 +0100
-+++ linux-3.10.24/drivers/net/ethernet/ralink/ralink_soc_eth.c 2013-12-27 21:16:44.892046631 +0100
-@@ -335,7 +335,7 @@
+--- a/drivers/net/ethernet/ralink/ralink_soc_eth.c
++++ b/drivers/net/ethernet/ralink/ralink_soc_eth.c
+@@ -335,7 +335,7 @@ static int fe_start_xmit(struct sk_buff
if (priv->soc->tso)
fe_start_tso(skb, dev, nr_frags, tx);
BOARDNAME:=Mikrotik RouterBoard 532
FEATURES:=pci targz broken
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += wpad-mini kmod-madwifi kmod-input-rb532
CPU_SUBTYPE:=vfp
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
DEVICE_TYPE:=developerboard
BOARDNAME:=Sun UltraSPARC
FEATURES+=fpu tgz ext4 squashfs broken
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
include $(INCLUDE_DIR)/target.mk
kmod-ledtrig-heartbeat kmod-ledtrig-gpio \
kmod-ledtrig-netdev \
kmod-cpu-msr hwclock wpad
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
CS5535_MASK:=0x0b000042
CPU_TYPE := geode
BOARDNAME:=Generic
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
define Target/Description
Build firmware images for x86 based boards
FEATURES:=ext4 pci usb
DEFAULT_PACKAGES += kmod-virtio-balloon kmod-virtio-net kmod-virtio-random
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
FEATURES:=ext4 vdi vmdk targz
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
KERNELNAME:=bzImage
FEATURES:=targz ubifs audio
SUBTARGETS:=qi_lb60 n516 n526 id800wt
-LINUX_VERSION:=3.10.24
+LINUX_VERSION:=3.10.26
DEVICE_TYPE=other
else
ret = chip->ecc.read_page(mtd, chip, bufpoi,
oob_required, page);
-@@ -3477,8 +3546,13 @@ int nand_scan_tail(struct mtd_info *mtd)
+@@ -3488,8 +3557,13 @@ int nand_scan_tail(struct mtd_info *mtd)
"hardware ECC not possible\n");
BUG();
}
projects / openwrt / openwrt.git / commitdiff