pistachio: Add extra devices to dts file

This adds some extra devices to the DTS file.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

diff --git a/target/linux/pistachio/patches-5.4/901-MIPS-DTS-img-marduk-Add-SPI-NAND-flash.patch b/target/linux/pistachio/patches-5.4/901-MIPS-DTS-img-marduk-Add-SPI-NAND-flash.patch
new file mode 100644 (file)
index 0000000..cd97e38
--- /dev/null
+++ b/target/linux/pistachio/patches-5.4/901-MIPS-DTS-img-marduk-Add-SPI-NAND-flash.patch
@@ -0,0 +1,30 @@
+From 0023c706f7e0f0f02bd48a63a2f3c04c839532ae Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 15 Aug 2020 16:04:53 +0200
+Subject: [PATCH 901/904] MIPS: DTS: img: marduk: Add SPI NAND flash
+
+Add Gigadevice GD5F4GQ4UCYIGT SPI NAND flash to the device tree.
+
+The NAND flash chip is connected with quad SPI, but reading currently
+fails in quad SPI mode.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/boot/dts/img/pistachio_marduk.dts | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/arch/mips/boot/dts/img/pistachio_marduk.dts
++++ b/arch/mips/boot/dts/img/pistachio_marduk.dts
+@@ -88,6 +88,12 @@
+               reg = <0>;
+               spi-max-frequency = <50000000>;
+       };
++
++      flash@1 {
++              compatible = "spi-nand";
++              reg = <1>;
++              spi-max-frequency = <50000000>;
++      };
+ };
+ 
+ &uart0 {

diff --git a/target/linux/pistachio/patches-5.4/901-MIPS-DTS-img-marduk-add-nor-partition-name.patch b/target/linux/pistachio/patches-5.4/901-MIPS-DTS-img-marduk-add-nor-partition-name.patch
deleted file mode 100644 (file)
index a8d0213..0000000
--- a/target/linux/pistachio/patches-5.4/901-MIPS-DTS-img-marduk-add-nor-partition-name.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From b5f49b448cd3c7ab930f1a53c88f739a86071df8 Mon Sep 17 00:00:00 2001
-From: Ian Pozella <Ian.Pozella@imgtec.com>
-Date: Mon, 20 Feb 2017 10:38:07 +0000
-Subject: MIPS: DTS: img: marduk: add nor partition name
-
-Signed-off-by: Ian Pozella <Ian.Pozella@imgtec.com>
----
- arch/mips/boot/dts/img/pistachio_marduk.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/boot/dts/img/pistachio_marduk.dts
-+++ b/arch/mips/boot/dts/img/pistachio_marduk.dts
-@@ -87,6 +87,7 @@
-               compatible = "spansion,s25fl016k", "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <50000000>;
-+              linux,mtd-name = "spi-nor";
-       };
- };
- 

diff --git a/target/linux/pistachio/patches-5.4/902-MIPS-DTS-img-marduk-Add-Cascoda-CA8210-6LoWPAN.patch b/target/linux/pistachio/patches-5.4/902-MIPS-DTS-img-marduk-Add-Cascoda-CA8210-6LoWPAN.patch
new file mode 100644 (file)
index 0000000..af1882e
--- /dev/null
+++ b/target/linux/pistachio/patches-5.4/902-MIPS-DTS-img-marduk-Add-Cascoda-CA8210-6LoWPAN.patch
@@ -0,0 +1,43 @@
+From b7700154d75e8d7c9a2022f09c2d5430137606fa Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 15 Aug 2020 16:05:25 +0200
+Subject: [PATCH 902/904] MIPS: DTS: img: marduk: Add Cascoda CA8210 6LoWPAN
+
+Add Cascoda CA8210 6LoWPAN controller to device tree.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/boot/dts/img/pistachio_marduk.dts | 22 +++++++++++++++++++++
+ 1 file changed, 22 insertions(+)
+
+--- a/arch/mips/boot/dts/img/pistachio_marduk.dts
++++ b/arch/mips/boot/dts/img/pistachio_marduk.dts
+@@ -75,6 +75,28 @@
+       VDD-supply = <&internal_dac_supply>;
+ };
+ 
++&spfi0 {
++      status = "okay";
++      pinctrl-0 = <&spim0_pins>, <&spim0_cs0_alt_pin>, <&spim0_cs2_alt_pin>, <&spim0_cs3_alt_pin>, <&spim0_cs4_alt_pin>;
++      pinctrl-names = "default";
++
++      cs-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>, <&gpio0 2 GPIO_ACTIVE_HIGH>,
++                      <&gpio1 12 GPIO_ACTIVE_HIGH>, <&gpio1 13 GPIO_ACTIVE_HIGH>;
++
++      ca8210: ca8210@0 {
++              status = "okay";
++              compatible = "cascoda,ca8210";
++              reg = <0>;
++              spi-max-frequency = <4000000>;
++              spi-cpol;
++              reset-gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
++              irq-gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
++              extclock-enable;
++              extclock-freq = <16000000>;
++              extclock-gpio = <2>;
++      };
++};
++
+ &spfi1 {
+       status = "okay";
+ 

diff --git a/target/linux/pistachio/patches-5.4/902-MIPS-DTS-img-marduk-add-nand-device-support.patch b/target/linux/pistachio/patches-5.4/902-MIPS-DTS-img-marduk-add-nand-device-support.patch
deleted file mode 100644 (file)
index d95f1af..0000000
--- a/target/linux/pistachio/patches-5.4/902-MIPS-DTS-img-marduk-add-nand-device-support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From c13cfb3a49cf1578bb85f19a7066f262503a39ba Mon Sep 17 00:00:00 2001
-From: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
-Date: Thu, 24 Nov 2016 19:26:46 +0530
-Subject: MIPS: DTS: img: marduk: add nand device support
-
-Signed-off-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
----
- arch/mips/boot/dts/img/pistachio_marduk.dts | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
---- a/arch/mips/boot/dts/img/pistachio_marduk.dts
-+++ b/arch/mips/boot/dts/img/pistachio_marduk.dts
-@@ -89,6 +89,17 @@
-               spi-max-frequency = <50000000>;
-               linux,mtd-name = "spi-nor";
-       };
-+      flash@1 {
-+              compatible = "spi-nand";
-+              reg = <1>;
-+              spi-max-frequency = <50000000>;
-+              nand-on-flash-bbt;
-+              spi-rx-bus-width = <2>;
-+              spi-tx-bus-width = <4>;
-+              #address-cells = <1>;
-+              #size-cells = <1>;
-+              linux,mtd-name = "spi-nand";
-+      };
- };
- 
- &uart0 {

diff --git a/target/linux/pistachio/patches-5.4/903-MIPS-DTS-img-marduk-Add-NXP-SC16IS752IPW.patch b/target/linux/pistachio/patches-5.4/903-MIPS-DTS-img-marduk-Add-NXP-SC16IS752IPW.patch
new file mode 100644 (file)
index 0000000..0814658
--- /dev/null
+++ b/target/linux/pistachio/patches-5.4/903-MIPS-DTS-img-marduk-Add-NXP-SC16IS752IPW.patch
@@ -0,0 +1,81 @@
+From ad4eba0c36ce8af6ab9ea1bc163e4c1ac7c271c3 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 15 Aug 2020 16:09:02 +0200
+Subject: [PATCH 903/904] MIPS: DTS: img: marduk: Add NXP SC16IS752IPW
+
+Add NXP SC16IS752IPW SPI-UART controller to device tree.
+
+This controller drives 2 UARTs and 7 LEDs on the board.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/boot/dts/img/pistachio_marduk.dts | 51 +++++++++++++++++++++
+ 1 file changed, 51 insertions(+)
+
+--- a/arch/mips/boot/dts/img/pistachio_marduk.dts
++++ b/arch/mips/boot/dts/img/pistachio_marduk.dts
+@@ -46,6 +46,46 @@
+               regulator-max-microvolt = <1800000>;
+       };
+ 
++      /* EXT clock from ca8210 is fed to sc16is752 */
++      ca8210_ext_clk: ca8210-ext-clk {
++              compatible = "fixed-clock";
++              #clock-cells = <0>;
++              clock-frequency = <16000000>;
++              clock-output-names = "ca8210_ext_clock";
++      };
++
++      gpioleds {
++              compatible = "gpio-leds";
++              user1 {
++                      label = "marduk:red:user1";
++                      gpios = <&sc16is752 0 GPIO_ACTIVE_LOW>;
++              };
++              user2 {
++                      label = "marduk:red:user2";
++                      gpios = <&sc16is752 1 GPIO_ACTIVE_LOW>;
++              };
++              user3 {
++                      label = "marduk:red:user3";
++                      gpios = <&sc16is752 2 GPIO_ACTIVE_LOW>;
++              };
++              user4 {
++                      label = "marduk:red:user4";
++                      gpios = <&sc16is752 3 GPIO_ACTIVE_LOW>;
++              };
++              user5 {
++                      label = "marduk:red:user5";
++                      gpios = <&sc16is752 4 GPIO_ACTIVE_LOW>;
++              };
++              user6 {
++                      label = "marduk:red:user6";
++                      gpios = <&sc16is752 5 GPIO_ACTIVE_LOW>;
++              };
++              user7 {
++                      label = "marduk:red:user7";
++                      gpios = <&sc16is752 6 GPIO_ACTIVE_LOW>;
++              };
++      };
++
+       leds {
+               compatible = "pwm-leds";
+               heartbeat {
+@@ -95,6 +135,17 @@
+               extclock-freq = <16000000>;
+               extclock-gpio = <2>;
+       };
++
++      sc16is752: sc16is752@1 {
++              compatible = "nxp,sc16is752";
++              reg = <1>;
++              clocks = <&ca8210_ext_clk>;
++              spi-max-frequency = <4000000>;
++              interrupt-parent = <&gpio0>;
++              interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
++              gpio-controller;
++              #gpio-cells = <2>;
++      };
+ };
+ 
+ &spfi1 {

diff --git a/target/linux/pistachio/patches-5.4/904-MIPS-DTS-img-marduk-Add-partition-name.patch b/target/linux/pistachio/patches-5.4/904-MIPS-DTS-img-marduk-Add-partition-name.patch
new file mode 100644 (file)
index 0000000..ce41c67
--- /dev/null
+++ b/target/linux/pistachio/patches-5.4/904-MIPS-DTS-img-marduk-Add-partition-name.patch
@@ -0,0 +1,27 @@
+From ff0e950b605047bf50d470023e0fb2fc2003a0f0 Mon Sep 17 00:00:00 2001
+From: Ian Pozella <Ian.Pozella@imgtec.com>
+Date: Mon, 20 Feb 2017 10:38:07 +0000
+Subject: [PATCH 904/904] MIPS: DTS: img: marduk: Add partition name
+
+Signed-off-by: Ian Pozella <Ian.Pozella@imgtec.com>
+---
+ arch/mips/boot/dts/img/pistachio_marduk.dts | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/arch/mips/boot/dts/img/pistachio_marduk.dts
++++ b/arch/mips/boot/dts/img/pistachio_marduk.dts
+@@ -160,12 +160,14 @@
+               compatible = "spansion,s25fl016k", "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <50000000>;
++              linux,mtd-name = "spi-nor";
+       };
+ 
+       flash@1 {
+               compatible = "spi-nand";
+               reg = <1>;
+               spi-max-frequency = <50000000>;
++              linux,mtd-name = "spi-nand";
+       };
+ };
+