Those boards were missing the ISDB-T support.
Most of the work on this patch were done by Alfredo.
My work here were to port this patch from Kernel 3.2 to upstream,
fix the issue caused by the set_frontend bad hook, and add the
Kconfig bits.
Tested on a X8502 board rebranded as:
"Leadership - Placa PCI-e de Captura de Vídeo Híbrida" - product code 3800.
Thanks-to: Alfredo Delaiti <alfredodelaiti@netscape.net>
Tested-by: Alfredo Delaiti <alfredodelaiti@netscape.net>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
select DVB_STV0367 if MEDIA_SUBDRV_AUTOSELECT
select DVB_TDA10071 if MEDIA_SUBDRV_AUTOSELECT
select DVB_A8293 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_MB86A20S if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MT2063 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MT2131 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT
} },
},
[CX23885_BOARD_MYGICA_X8507] = {
- .name = "Mygica X8507",
+ .name = "Mygica X8502/X8507 ISDB-T",
.tuner_type = TUNER_XC5000,
.tuner_addr = 0x61,
.tuner_bus = 1,
.porta = CX23885_ANALOG_VIDEO,
+ .portb = CX23885_MPEG_DVB,
.input = {
{
.type = CX23885_VMUX_TELEVISION,
case CX23885_BOARD_MYGICA_X8507:
/* GPIO-0 (0)Analog / (1)Digital TV */
/* GPIO-1 reset XC5000 */
- /* GPIO-2 reset LGS8GL5 / LGS8G75 */
+ /* GPIO-2 demod reset */
cx23885_gpio_enable(dev, GPIO_0 | GPIO_1 | GPIO_2, 1);
cx23885_gpio_clear(dev, GPIO_1 | GPIO_2);
mdelay(100);
break;
case CX23885_BOARD_MYGICA_X8506:
case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+ case CX23885_BOARD_MYGICA_X8507:
ts1->gen_ctrl_val = 0x5; /* Parallel */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
#include "stb6100_cfg.h"
#include "tda10071.h"
#include "a8293.h"
+#include "mb86a20s.h"
static unsigned int debug;
.if_khz = 5380,
};
+static struct mb86a20s_config mygica_x8507_mb86a20s_config = {
+ .demod_address = 0x10,
+};
+
+static struct xc5000_config mygica_x8507_xc5000_config = {
+ .i2c_address = 0x61,
+ .if_khz = 4000,
+};
+
static struct stv090x_config prof_8000_stv090x_config = {
.device = STV0903,
.demod_mode = STV090x_SINGLE,
}
break;
case CX23885_BOARD_MYGICA_X8506:
+ case CX23885_BOARD_MYGICA_X8507:
case CX23885_BOARD_MAGICPRO_PROHDTVE2:
/* Select Digital TV */
cx23885_gpio_set(dev, GPIO_0);
}
cx23885_set_frontend_hook(port, fe0->dvb.frontend);
break;
+ case CX23885_BOARD_MYGICA_X8507:
+ i2c_bus = &dev->i2c_bus[0];
+ i2c_bus2 = &dev->i2c_bus[1];
+ fe0->dvb.frontend = dvb_attach(mb86a20s_attach,
+ &mygica_x8507_mb86a20s_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(xc5000_attach,
+ fe0->dvb.frontend,
+ &i2c_bus2->i2c_adap,
+ &mygica_x8507_xc5000_config);
+ }
+ cx23885_set_frontend_hook(port, fe0->dvb.frontend);
+ break;
case CX23885_BOARD_MAGICPRO_PROHDTVE2:
i2c_bus = &dev->i2c_bus[0];
i2c_bus2 = &dev->i2c_bus[1];