--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright (C) 2017 Christian Mehlis <christian@m3hlis.de>
+ * Copyright (C) 2018 Mathias Kresin <dev@kresin.me>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of any
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ compatible = "compex,wpq864", "qcom,ipq8064";
+ model = "Compex WPQ864";
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+ serial0 = &gsbi4_serial;
+ ethernet0 = &gmac1;
+ ethernet1 = &gmac0;
+
+ led-boot = &led_pass;
+ led-failsafe = &led_fail;
+ led-running = &led_pass;
+ led-upgrade = &led_pass;
+ };
+
+ chosen {
+ linux,stdout-path = "serial0:115200n8";
+ };
+
+ soc {
+ rpm@108000 {
+ pinctrl-0 = <&rpm_pins>;
+ pinctrl-names = "default";
+ };
+
+ nand@1ac00000 {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ mt29f2g08abbeah4@0 {
+ compatible = "qcom,nandcs";
+
+ reg = <0>;
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ SBL1@0 {
+ label = "SBL1";
+ reg = <0x0000000 0x0040000>;
+ read-only;
+ };
+
+ MIBIB@40000 {
+ label = "MIBIB";
+ reg = <0x0040000 0x0140000>;
+ read-only;
+ };
+
+ SBL2@180000 {
+ label = "SBL2";
+ reg = <0x0180000 0x0140000>;
+ read-only;
+ };
+
+ SBL3@2c0000 {
+ label = "SBL3";
+ reg = <0x02c0000 0x0280000>;
+ read-only;
+ };
+
+ DDRCONFIG@540000 {
+ label = "DDRCONFIG";
+ reg = <0x0540000 0x0120000>;
+ read-only;
+ };
+
+ SSD@660000 {
+ label = "SSD";
+ reg = <0x0660000 0x0120000>;
+ read-only;
+ };
+
+ TZ@780000 {
+ label = "TZ";
+ reg = <0x0780000 0x0280000>;
+ read-only;
+ };
+
+ RPM@a00000 {
+ label = "RPM";
+ reg = <0x0a00000 0x0280000>;
+ read-only;
+ };
+
+ APPSBL@c80000 {
+ label = "APPSBL";
+ reg = <0x0c80000 0x0500000>;
+ read-only;
+ };
+
+ APPSBLENV@1180000 {
+ label = "APPSBLENV";
+ reg = <0x1180000 0x0080000>;
+ };
+
+ ART@1200000 {
+ label = "ART";
+ reg = <0x1200000 0x0140000>;
+ };
+
+ ubi@1340000 {
+ label = "ubi";
+ reg = <0x1340000 0x4000000>;
+ };
+
+ BOOTCONFIG@1340000 {
+ label = "BOOTCONFIG";
+ reg = <0x5340000 0x0060000>;
+ };
+
+ SBL2-1@53a0000- {
+ label = "SBL2_1";
+ reg = <0x53a0000 0x0140000>;
+ read-only;
+ };
+
+ SBL3-1@54e0000 {
+ label = "SBL3_1";
+ reg = <0x54e0000 0x0280000>;
+ read-only;
+ };
+
+ DDRCONFIG-1@5760000 {
+ label = "DDRCONFIG_1";
+ reg = <0x5760000 0x0120000>;
+ read-only;
+ };
+
+ SSD-1@5880000 {
+ label = "SSD_1";
+ reg = <0x5880000 0x0120000>;
+ read-only;
+ };
+
+ TZ-1@59a0000 {
+ label = "TZ_1";
+ reg = <0x59a0000 0x0280000>;
+ read-only;
+ };
+
+ RPM-1@5c20000 {
+ label = "RPM_1";
+ reg = <0x5c20000 0x0280000>;
+ read-only;
+ };
+
+ BOOTCONFIG1@5ea0000 {
+ label = "BOOTCONFIG1";
+ reg = <0x5ea0000 0x0060000>;
+ };
+
+ APPSBL-1@5f00000 {
+ label = "APPSBL_1";
+ reg = <0x5f00000 0x0500000>;
+ read-only;
+ };
+
+ ubi-1@6400000 {
+ label = "ubi_1";
+ reg = <0x6400000 0x4000000>;
+ };
+
+ unused@a400000 {
+ label = "unused";
+ reg = <0xa400000 0x5c00000>;
+ };
+ };
+ };
+ };
+ };
+
+ mdio0: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "virtual,mdio-gpio";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+
+ ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ ethernet-phy@4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ rss4 {
+ label = "wpq864:green:rss4";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ rss3 {
+ label = "wpq864:green:rss3";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ rss2 {
+ label = "wpq864:orange:rss2";
+ gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
+ };
+
+ rss1 {
+ label = "wpq864:red:rss1";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_pass: pass {
+ label = "wpq864:green:pass";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_fail: fail {
+ label = "wpq864:green:fail";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb {
+ label = "wpq864:green:usb";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb-pcie {
+ label = "wpq864:green:usb-pcie";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ beeper {
+ compatible = "gpio-beeper";
+
+ pinctrl-0 = <&beeper_pins>;
+ pinctrl-names = "default";
+
+ gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&gmac1 {
+ status = "okay";
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gsbi4 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+};
+
+&gsbi4_serial {
+ status = "okay";
+
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+};
+
+&gsbi5 {
+ status = "okay";
+
+ qcom,mode = <GSBI_PROT_SPI>;
+
+ spi@1a280000 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ s25fl256s1@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+ };
+};
+
+&hs_phy_0 { /* USB3 port 0 HS phy */
+ status = "okay";
+};
+
+&hs_phy_1 { /* USB3 port 1 HS phy */
+ status = "okay";
+};
+
+&ss_phy_0 { /* USB3 port 0 SS phy */
+ status = "okay";
+
+ rx_eq = <2>;
+ tx_deamp_3_5db = <32>;
+ mpll = <160>;
+};
+
+&ss_phy_1 { /* USB3 port 1 SS phy */
+ status = "okay";
+
+ rx_eq = <2>;
+ tx_deamp_3_5db = <32>;
+ mpll = <160>;
+};
+
+&pcie0 {
+ status = "okay";
+
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+ /delete-property/ perst-gpios;
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+ /delete-property/ perst-gpios;
+};
+
+&qcom_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinctrl0 {
+ pcie0_pcie2_perst {
+ pins = "gpio3";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9", "gpio22",
+ "gpio23", "gpio24", "gpio25", "gpio53";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ button_pins: button_pins {
+ mux {
+ pins = "gpio54";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ beeper_pins: beeper_pins {
+ mux {
+ pins = "gpio55";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ rpm_pins: rpm_pins {
+ mux {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ drive-strength = <10>;
+ bias-disable;
+ };
+ };
+
+ uart0_pins: uart0_pins {
+ mux {
+ pins = "gpio10", "gpio11";
+ function = "gsbi4";
+ drive-strength = <10>;
+ bias-disable;
+ };
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19";
+ function = "gsbi5";
+ drive-strength = <10>;
+ bias-pull-down;
+ };
+
+ clk {
+ pins = "gpio21";
+ function = "gsbi5";
+ drive-strength = <12>;
+ bias-pull-down;
+ };
+
+ cs {
+ pins = "gpio20";
+ function = "gpio";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ nand_pins: nand_pins {
+ mux {
+ pins = "gpio34", "gpio35", "gpio36", "gpio37",
+ "gpio38", "gpio39", "gpio40", "gpio41",
+ "gpio42", "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ function = "nand";
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ pullups {
+ pins = "gpio39";
+ bias-pull-up;
+ };
+
+ hold {
+ pins = "gpio40", "gpio41", "gpio42", "gpio43",
+ "gpio44", "gpio45", "gpio46", "gpio47";
+ bias-bus-hold;
+ };
+ };
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30",
+ "gpio31", "gpio32", "gpio51", "gpio52",
+ "gpio59", "gpio60", "gpio61", "gpio62";
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+
+&usb3_1 {
+ status = "okay";
+};
+
+&tcsr {
+ qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
+};
projects / openwrt / staging / adrian.git / commitdiff