#include <asm/system.h>
/*
- * Controller mappings for all interrupt sources:
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves, it doesn't deserve
+ * a generic callback i think.
*/
-irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned = {
- [0 ... NR_IRQS-1] = {
- .handler = &no_irq_type,
- .lock = SPIN_LOCK_UNLOCKED
- }
-};
-
-/*
- * Special irq handlers.
- */
-
-irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs)
-{
- return IRQ_NONE;
-}
-
-/*
- * Generic no controller code
- */
-
-static void enable_none(unsigned int irq) { }
-static unsigned int startup_none(unsigned int irq) { return 0; }
-static void disable_none(unsigned int irq) { }
-static void ack_none(unsigned int irq)
+void ack_bad_irq(unsigned int irq)
{
- /*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves, it doesn't deserve
- * a generic callback i think.
- */
printk("received IRQ %d with unknown interrupt type\n", irq);
}
-/* startup is the same as "enable", shutdown is same as "disable" */
-#define shutdown_none disable_none
-#define end_none enable_none
-
-struct hw_interrupt_type no_irq_type = {
- .typename = "none",
- .startup = startup_none,
- .shutdown = shutdown_none,
- .enable = enable_none,
- .disable = disable_none,
- .ack = ack_none,
- .end = end_none
-};
-
volatile unsigned long irq_err_count, spurious_count;
/*
return 0;
}
-/*
- * This should really return information about whether
- * we should do bottom half handling etc. Right now we
- * end up _always_ checking the bottom half, which is a
- * waste of time and is not what some drivers would
- * prefer.
- */
-int handle_IRQ_event(unsigned int irq, struct pt_regs * regs, struct irqaction * action)
-{
- int status = 1; /* Force the "do bottom halves" bit */
- int ret;
-
- if (!(action->flags & SA_INTERRUPT))
- local_irq_enable();
-
- do {
- ret = action->handler(irq, action->dev_id, regs);
- if (ret == IRQ_HANDLED)
- status |= action->flags;
- action = action->next;
- } while (action);
- if (status & SA_SAMPLE_RANDOM)
- add_interrupt_randomness(irq);
- local_irq_disable();
-
- return status;
-}
-
-/*
- * Generic enable/disable code: this just calls
- * down into the PIC-specific version for the actual
- * hardware disable after having gotten the irq
- * controller lock.
- */
-
-/**
- * disable_irq_nosync - disable an irq without waiting
- * @irq: Interrupt to disable
- *
- * Disable the selected interrupt line. Disables of an interrupt
- * stack. Unlike disable_irq(), this function does not ensure existing
- * instances of the IRQ handler have completed before returning.
- *
- * This function may be called from IRQ context.
- */
-
-void inline disable_irq_nosync(unsigned int irq)
-{
- irq_desc_t *desc = irq_desc + irq;
- unsigned long flags;
-
- spin_lock_irqsave(&desc->lock, flags);
- if (!desc->depth++) {
- desc->status |= IRQ_DISABLED;
- desc->handler->disable(irq);
- }
- spin_unlock_irqrestore(&desc->lock, flags);
-}
-
-/**
- * disable_irq - disable an irq and wait for completion
- * @irq: Interrupt to disable
- *
- * Disable the selected interrupt line. Disables of an interrupt
- * stack. That is for two disables you need two enables. This
- * function waits for any pending IRQ handlers for this interrupt
- * to complete before returning. If you use this function while
- * holding a resource the IRQ handler may need you will deadlock.
- *
- * This function may be called - with care - from IRQ context.
- */
-
-void disable_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- synchronize_irq(irq);
-}
-
-/**
- * enable_irq - enable interrupt handling on an irq
- * @irq: Interrupt to enable
- *
- * Re-enables the processing of interrupts on this IRQ line
- * providing no disable_irq calls are now in effect.
- *
- * This function may be called from IRQ context.
- */
-
-void enable_irq(unsigned int irq)
-{
- irq_desc_t *desc = irq_desc + irq;
- unsigned long flags;
-
- spin_lock_irqsave(&desc->lock, flags);
- switch (desc->depth) {
- case 1: {
- unsigned int status = desc->status & ~IRQ_DISABLED;
- desc->status = status;
- if ((status & (IRQ_PENDING | IRQ_REPLAY)) == IRQ_PENDING) {
- desc->status = status | IRQ_REPLAY;
- hw_resend_irq(desc->handler,irq);
- }
- desc->handler->enable(irq);
- /* fall-through */
- }
- default:
- desc->depth--;
- break;
- case 0:
- printk("enable_irq(%u) unbalanced from %p\n", irq,
- __builtin_return_address(0));
- }
- spin_unlock_irqrestore(&desc->lock, flags);
-}
-
/* Handle interrupt IRQ. REGS are the registers at the time of ther
interrupt. */
unsigned int handle_irq (int irq, struct pt_regs *regs)
{
- /*
- * We ack quickly, we don't want the irq controller
- * thinking we're snobs just because some other CPU has
- * disabled global interrupts (we have already done the
- * INT_ACK cycles, it's too late to try to pretend to the
- * controller that we aren't taking the interrupt).
- *
- * 0 return value means that this irq is already being
- * handled by some other CPU. (or is disabled)
- */
- int cpu = smp_processor_id();
- irq_desc_t *desc = irq_desc + irq;
- struct irqaction * action;
- unsigned int status;
-
irq_enter();
- kstat_cpu(cpu).irqs[irq]++;
- spin_lock(&desc->lock);
- desc->handler->ack(irq);
- /*
- REPLAY is when Linux resends an IRQ that was dropped earlier
- WAITING is used by probe to mark irqs that are being tested
- */
- status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING);
- status |= IRQ_PENDING; /* we _want_ to handle it */
-
- /*
- * If the IRQ is disabled for whatever reason, we cannot
- * use the action we have.
- */
- action = NULL;
- if (likely(!(status & (IRQ_DISABLED | IRQ_INPROGRESS)))) {
- action = desc->action;
- status &= ~IRQ_PENDING; /* we commit to handling */
- status |= IRQ_INPROGRESS; /* we are handling it */
- }
- desc->status = status;
-
- /*
- * If there is no IRQ handler or it was disabled, exit early.
- Since we set PENDING, if another processor is handling
- a different instance of this same irq, the other processor
- will take care of it.
- */
- if (unlikely(!action))
- goto out;
-
- /*
- * Edge triggered interrupts need to remember
- * pending events.
- * This applies to any hw interrupts that allow a second
- * instance of the same irq to arrive while we are in handle_irq
- * or in the handler. But the code here only handles the _second_
- * instance of the irq, not the third or fourth. So it is mostly
- * useful for irq hardware that does not mask cleanly in an
- * SMP environment.
- */
- for (;;) {
- spin_unlock(&desc->lock);
- handle_IRQ_event(irq, regs, action);
- spin_lock(&desc->lock);
-
- if (likely(!(desc->status & IRQ_PENDING)))
- break;
- desc->status &= ~IRQ_PENDING;
- }
- desc->status &= ~IRQ_INPROGRESS;
-
-out:
- /*
- * The ->end() handler has to deal with interrupts which got
- * disabled while the handler was running.
- */
- desc->handler->end(irq);
- spin_unlock(&desc->lock);
-
+ __do_IRQ(irq, regs);
irq_exit();
-
return 1;
}
-/**
- * request_irq - allocate an interrupt line
- * @irq: Interrupt line to allocate
- * @handler: Function to be called when the IRQ occurs
- * @irqflags: Interrupt type flags
- * @devname: An ascii name for the claiming device
- * @dev_id: A cookie passed back to the handler function
- *
- * This call allocates interrupt resources and enables the
- * interrupt line and IRQ handling. From the point this
- * call is made your handler function may be invoked. Since
- * your handler function must clear any interrupt the board
- * raises, you must take care both to initialise your hardware
- * and to set up the interrupt handler in the right order.
- *
- * Dev_id must be globally unique. Normally the address of the
- * device data structure is used as the cookie. Since the handler
- * receives this value it makes sense to use it.
- *
- * If your interrupt is shared you must pass a non NULL dev_id
- * as this is required when freeing the interrupt.
- *
- * Flags:
- *
- * SA_SHIRQ Interrupt is shared
- *
- * SA_INTERRUPT Disable local interrupts while processing
- *
- * SA_SAMPLE_RANDOM The interrupt can be used for entropy
- *
- */
-
-int request_irq(unsigned int irq,
- irqreturn_t (*handler)(int, void *, struct pt_regs *),
- unsigned long irqflags,
- const char * devname,
- void *dev_id)
-{
- int retval;
- struct irqaction * action;
-
-#if 1
- /*
- * Sanity-check: shared interrupts should REALLY pass in
- * a real dev-ID, otherwise we'll have trouble later trying
- * to figure out which interrupt is which (messes up the
- * interrupt freeing logic etc).
- */
- if (irqflags & SA_SHIRQ) {
- if (!dev_id)
- printk("Bad boy: %s (at 0x%x) called us without a dev_id!\n", devname, (&irq)[-1]);
- }
-#endif
-
- if (irq >= NR_IRQS)
- return -EINVAL;
- if (!handler)
- return -EINVAL;
-
- action = (struct irqaction *)
- kmalloc(sizeof(struct irqaction), GFP_KERNEL);
- if (!action)
- return -ENOMEM;
-
- action->handler = handler;
- action->flags = irqflags;
- cpus_clear(action->mask);
- action->name = devname;
- action->next = NULL;
- action->dev_id = dev_id;
-
- retval = setup_irq(irq, action);
- if (retval)
- kfree(action);
- return retval;
-}
-
-EXPORT_SYMBOL(request_irq);
-
-/**
- * free_irq - free an interrupt
- * @irq: Interrupt line to free
- * @dev_id: Device identity to free
- *
- * Remove an interrupt handler. The handler is removed and if the
- * interrupt line is no longer in use by any driver it is disabled.
- * On a shared IRQ the caller must ensure the interrupt is disabled
- * on the card it drives before calling this function. The function
- * does not return until any executing interrupts for this IRQ
- * have completed.
- *
- * This function may be called from interrupt context.
- *
- * Bugs: Attempting to free an irq in a handler for the same irq hangs
- * the machine.
- */
-
-void free_irq(unsigned int irq, void *dev_id)
-{
- irq_desc_t *desc;
- struct irqaction **p;
- unsigned long flags;
-
- if (irq >= NR_IRQS)
- return;
-
- desc = irq_desc + irq;
- spin_lock_irqsave(&desc->lock,flags);
- p = &desc->action;
- for (;;) {
- struct irqaction * action = *p;
- if (action) {
- struct irqaction **pp = p;
- p = &action->next;
- if (action->dev_id != dev_id)
- continue;
-
- /* Found it - now remove it from the list of entries */
- *pp = action->next;
- if (!desc->action) {
- desc->status |= IRQ_DISABLED;
- desc->handler->shutdown(irq);
- }
- spin_unlock_irqrestore(&desc->lock,flags);
-
- synchronize_irq(irq);
- kfree(action);
- return;
- }
- printk("Trying to free free IRQ%d\n",irq);
- spin_unlock_irqrestore(&desc->lock,flags);
- return;
- }
-}
-
-EXPORT_SYMBOL(free_irq);
-
-/*
- * IRQ autodetection code..
- *
- * This depends on the fact that any interrupt that
- * comes in on to an unassigned handler will get stuck
- * with "IRQ_WAITING" cleared and the interrupt
- * disabled.
- */
-
-static DECLARE_MUTEX(probe_sem);
-
-/**
- * probe_irq_on - begin an interrupt autodetect
- *
- * Commence probing for an interrupt. The interrupts are scanned
- * and a mask of potential interrupt lines is returned.
- *
- */
-
-unsigned long probe_irq_on(void)
-{
- unsigned int i;
- irq_desc_t *desc;
- unsigned long val;
- unsigned long delay;
-
- down(&probe_sem);
- /*
- * something may have generated an irq long ago and we want to
- * flush such a longstanding irq before considering it as spurious.
- */
- for (i = NR_IRQS-1; i > 0; i--) {
- desc = irq_desc + i;
-
- spin_lock_irq(&desc->lock);
- if (!irq_desc[i].action)
- irq_desc[i].handler->startup(i);
- spin_unlock_irq(&desc->lock);
- }
-
- /* Wait for longstanding interrupts to trigger. */
- for (delay = jiffies + HZ/50; time_after(delay, jiffies); )
- /* about 20ms delay */ barrier();
-
- /*
- * enable any unassigned irqs
- * (we must startup again here because if a longstanding irq
- * happened in the previous stage, it may have masked itself)
- */
- for (i = NR_IRQS-1; i > 0; i--) {
- desc = irq_desc + i;
-
- spin_lock_irq(&desc->lock);
- if (!desc->action) {
- desc->status |= IRQ_AUTODETECT | IRQ_WAITING;
- if (desc->handler->startup(i))
- desc->status |= IRQ_PENDING;
- }
- spin_unlock_irq(&desc->lock);
- }
-
- /*
- * Wait for spurious interrupts to trigger
- */
- for (delay = jiffies + HZ/10; time_after(delay, jiffies); )
- /* about 100ms delay */ barrier();
-
- /*
- * Now filter out any obviously spurious interrupts
- */
- val = 0;
- for (i = 0; i < NR_IRQS; i++) {
- irq_desc_t *desc = irq_desc + i;
- unsigned int status;
-
- spin_lock_irq(&desc->lock);
- status = desc->status;
-
- if (status & IRQ_AUTODETECT) {
- /* It triggered already - consider it spurious. */
- if (!(status & IRQ_WAITING)) {
- desc->status = status & ~IRQ_AUTODETECT;
- desc->handler->shutdown(i);
- } else
- if (i < 32)
- val |= 1 << i;
- }
- spin_unlock_irq(&desc->lock);
- }
-
- return val;
-}
-
-EXPORT_SYMBOL(probe_irq_on);
-
-/*
- * Return a mask of triggered interrupts (this
- * can handle only legacy ISA interrupts).
- */
-
-/**
- * probe_irq_mask - scan a bitmap of interrupt lines
- * @val: mask of interrupts to consider
- *
- * Scan the ISA bus interrupt lines and return a bitmap of
- * active interrupts. The interrupt probe logic state is then
- * returned to its previous value.
- *
- * Note: we need to scan all the irq's even though we will
- * only return ISA irq numbers - just so that we reset them
- * all to a known state.
- */
-unsigned int probe_irq_mask(unsigned long val)
-{
- int i;
- unsigned int mask;
-
- mask = 0;
- for (i = 0; i < NR_IRQS; i++) {
- irq_desc_t *desc = irq_desc + i;
- unsigned int status;
-
- spin_lock_irq(&desc->lock);
- status = desc->status;
-
- if (status & IRQ_AUTODETECT) {
- if (i < 16 && !(status & IRQ_WAITING))
- mask |= 1 << i;
-
- desc->status = status & ~IRQ_AUTODETECT;
- desc->handler->shutdown(i);
- }
- spin_unlock_irq(&desc->lock);
- }
- up(&probe_sem);
-
- return mask & val;
-}
-
-/*
- * Return the one interrupt that triggered (this can
- * handle any interrupt source).
- */
-
-/**
- * probe_irq_off - end an interrupt autodetect
- * @val: mask of potential interrupts (unused)
- *
- * Scans the unused interrupt lines and returns the line which
- * appears to have triggered the interrupt. If no interrupt was
- * found then zero is returned. If more than one interrupt is
- * found then minus the first candidate is returned to indicate
- * their is doubt.
- *
- * The interrupt probe logic state is returned to its previous
- * value.
- *
- * BUGS: When used in a module (which arguably shouldnt happen)
- * nothing prevents two IRQ probe callers from overlapping. The
- * results of this are non-optimal.
- */
-
-int probe_irq_off(unsigned long val)
-{
- int i, irq_found, nr_irqs;
-
- nr_irqs = 0;
- irq_found = 0;
- for (i = 0; i < NR_IRQS; i++) {
- irq_desc_t *desc = irq_desc + i;
- unsigned int status;
-
- spin_lock_irq(&desc->lock);
- status = desc->status;
-
- if (status & IRQ_AUTODETECT) {
- if (!(status & IRQ_WAITING)) {
- if (!nr_irqs)
- irq_found = i;
- nr_irqs++;
- }
- desc->status = status & ~IRQ_AUTODETECT;
- desc->handler->shutdown(i);
- }
- spin_unlock_irq(&desc->lock);
- }
- up(&probe_sem);
-
- if (nr_irqs > 1)
- irq_found = -irq_found;
- return irq_found;
-}
-
-EXPORT_SYMBOL(probe_irq_off);
-
-/* this was setup_x86_irq but it seems pretty generic */
-int setup_irq(unsigned int irq, struct irqaction * new)
-{
- int shared = 0;
- unsigned long flags;
- struct irqaction *old, **p;
- irq_desc_t *desc = irq_desc + irq;
-
- /*
- * Some drivers like serial.c use request_irq() heavily,
- * so we have to be careful not to interfere with a
- * running system.
- */
- if (new->flags & SA_SAMPLE_RANDOM) {
- /*
- * This function might sleep, we want to call it first,
- * outside of the atomic block.
- * Yes, this might clear the entropy pool if the wrong
- * driver is attempted to be loaded, without actually
- * installing a new handler, but is this really a problem,
- * only the sysadmin is able to do this.
- */
- rand_initialize_irq(irq);
- }
-
- /*
- * The following block of code has to be executed atomically
- */
- spin_lock_irqsave(&desc->lock,flags);
- p = &desc->action;
- if ((old = *p) != NULL) {
- /* Can't share interrupts unless both agree to */
- if (!(old->flags & new->flags & SA_SHIRQ)) {
- spin_unlock_irqrestore(&desc->lock,flags);
- return -EBUSY;
- }
-
- /* add new interrupt at end of irq queue */
- do {
- p = &old->next;
- old = *p;
- } while (old);
- shared = 1;
- }
-
- *p = new;
-
- if (!shared) {
- desc->depth = 0;
- desc->status &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS);
- desc->handler->startup(irq);
- }
- spin_unlock_irqrestore(&desc->lock,flags);
-
- /* register_irq_proc(irq); */
- return 0;
-}
-
/* Initialize irq handling for IRQs.
BASE_IRQ, BASE_IRQ+INTERVAL, ..., BASE_IRQ+NUM*INTERVAL
to IRQ_TYPE. An IRQ_TYPE of 0 means to use a generic interrupt type. */
base_irq += interval;
}
}
-
-#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
-void init_irq_proc(void)
-{
-}
-#endif /* CONFIG_PROC_FS && CONFIG_SYSCTL */
projects / openwrt / staging / blogic.git / commitdiff