$(eval $(call KernelPackage,usb-phy-nop))
-define KernelPackage/usb-phy-qcom-dwc3
- TITLE:=DWC3 USB QCOM PHY driver
+define KernelPackage/phy-qcom-ipq806x-usb
+ TITLE:=Qualcomm IPQ806x DWC3 USB PHY driver
DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x)
- KCONFIG:= CONFIG_PHY_QCOM_DWC3
+ KCONFIG:= CONFIG_PHY_QCOM_IPQ806X_USB
FILES:= \
- $(LINUX_DIR)/drivers/phy/qualcomm/phy-qcom-dwc3.ko
- AUTOLOAD:=$(call AutoLoad,45,phy-qcom-dwc3,1)
+ $(LINUX_DIR)/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.ko
+ AUTOLOAD:=$(call AutoLoad,45,phy-qcom-ipq806x-usb,1)
$(call AddDepends/usb)
endef
-define KernelPackage/usb-phy-qcom-dwc3/description
+define KernelPackage/phy-qcom-ipq806x-usb/description
This driver provides support for the integrated DesignWare
USB3 IP Core within the QCOM SoCs.
endef
-$(eval $(call KernelPackage,usb-phy-qcom-dwc3))
+$(eval $(call KernelPackage,phy-qcom-ipq806x-usb))
define KernelPackage/phy-ath79-usb
kmod-leds-gpio kmod-gpio-button-hotplug swconfig \
kmod-ata-ahci kmod-ata-ahci-platform \
kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
- kmod-usb-phy-qcom-dwc3 kmod-usb3 kmod-usb-dwc3-qcom \
+ kmod-phy-qcom-ipq806x-usb kmod-usb3 kmod-usb-dwc3-qcom \
kmod-ath10k-ct wpad-basic \
uboot-envtools
};
&ss_phy_0 {
- rx_eq = <2>;
- tx_deamp_3_5db = <32>;
- mpll = <0xa0>;
+ qcom,rx-eq = <2>;
+ qcom,tx-deamp_3_5db = <32>;
+ qcom,mpll = <5>;
};
&ss_phy_1 {
- rx_eq = <2>;
- tx_deamp_3_5db = <32>;
- mpll = <0xa0>;
+ qcom,rx-eq = <2>;
+ qcom,tx-deamp_3_5db = <32>;
+ qcom,mpll = <5>;
};
};
&ss_phy_0 {
- rx_eq = <2>;
- tx_deamp_3_5db = <32>;
- mpll = <0xa0>;
+ qcom,rx-eq = <2>;
+ qcom,tx-deamp_3_5db = <32>;
+ qcom,mpll = <5>;
};
&ss_phy_1 {
- rx_eq = <2>;
- tx_deamp_3_5db = <32>;
- mpll = <0xa0>;
+ qcom,rx-eq = <2>;
+ qcom,tx-deamp_3_5db = <32>;
+ qcom,mpll = <5>;
};
&opp_table0 {
+++ /dev/null
-From b9004f4fd23e4c614d71c972f3a9311665480e29 Mon Sep 17 00:00:00 2001
-From: Andy Gross <agross@codeaurora.org>
-Date: Thu, 9 Mar 2017 08:19:18 +0100
-Subject: [PATCH 32/69] phy: add qcom dwc3 phy
-
-Signed-off-by: Andy Gross <agross@codeaurora.org>
----
-
---- a/drivers/phy/qualcomm/Kconfig
-+++ b/drivers/phy/qualcomm/Kconfig
-@@ -91,3 +91,15 @@ config PHY_QCOM_USB_HSIC
- select GENERIC_PHY
- help
- Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
-+
-+config PHY_QCOM_DWC3
-+ tristate "QCOM DWC3 USB PHY support"
-+ depends on ARCH_QCOM
-+ depends on HAS_IOMEM
-+ depends on OF
-+ select GENERIC_PHY
-+ help
-+ This option enables support for the Synopsis PHYs present inside the
-+ Qualcomm USB3.0 DWC3 controller. This driver supports both HS and SS
-+ PHY controllers.
-+
---- a/drivers/phy/qualcomm/Makefile
-+++ b/drivers/phy/qualcomm/Makefile
-@@ -10,3 +10,4 @@ obj-$(CONFIG_PHY_QCOM_UFS_14NM) += phy-
- obj-$(CONFIG_PHY_QCOM_UFS_20NM) += phy-qcom-ufs-qmp-20nm.o
- obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
- obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
-+obj-$(CONFIG_PHY_QCOM_DWC3) += phy-qcom-dwc3.o
---- /dev/null
-+++ b/drivers/phy/qualcomm/phy-qcom-dwc3.c
-@@ -0,0 +1,578 @@
-+/* Copyright (c) 2014-2015, Code Aurora Forum. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+* This program is distributed in the hope that it will be useful,
-+* but WITHOUT ANY WARRANTY; without even the implied warranty of
-+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+* GNU General Public License for more details.
-+*/
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/phy/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/regmap.h>
-+#include <linux/mfd/syscon.h>
-+
-+/**
-+ * USB QSCRATCH Hardware registers
-+ */
-+#define QSCRATCH_GENERAL_CFG (0x08)
-+#define HSUSB_PHY_CTRL_REG (0x10)
-+
-+/* PHY_CTRL_REG */
-+#define HSUSB_CTRL_DMSEHV_CLAMP BIT(24)
-+#define HSUSB_CTRL_USB2_SUSPEND BIT(23)
-+#define HSUSB_CTRL_UTMI_CLK_EN BIT(21)
-+#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID BIT(20)
-+#define HSUSB_CTRL_USE_CLKCORE BIT(18)
-+#define HSUSB_CTRL_DPSEHV_CLAMP BIT(17)
-+#define HSUSB_CTRL_COMMONONN BIT(11)
-+#define HSUSB_CTRL_ID_HV_CLAMP BIT(9)
-+#define HSUSB_CTRL_OTGSESSVLD_CLAMP BIT(8)
-+#define HSUSB_CTRL_CLAMP_EN BIT(7)
-+#define HSUSB_CTRL_RETENABLEN BIT(1)
-+#define HSUSB_CTRL_POR BIT(0)
-+
-+/* QSCRATCH_GENERAL_CFG */
-+#define HSUSB_GCFG_XHCI_REV BIT(2)
-+
-+/**
-+ * USB QSCRATCH Hardware registers
-+ */
-+#define SSUSB_PHY_CTRL_REG (0x30)
-+#define SSUSB_PHY_PARAM_CTRL_1 (0x34)
-+#define SSUSB_PHY_PARAM_CTRL_2 (0x38)
-+#define CR_PROTOCOL_DATA_IN_REG (0x3c)
-+#define CR_PROTOCOL_DATA_OUT_REG (0x40)
-+#define CR_PROTOCOL_CAP_ADDR_REG (0x44)
-+#define CR_PROTOCOL_CAP_DATA_REG (0x48)
-+#define CR_PROTOCOL_READ_REG (0x4c)
-+#define CR_PROTOCOL_WRITE_REG (0x50)
-+
-+/* PHY_CTRL_REG */
-+#define SSUSB_CTRL_REF_USE_PAD BIT(28)
-+#define SSUSB_CTRL_TEST_POWERDOWN BIT(27)
-+#define SSUSB_CTRL_LANE0_PWR_PRESENT BIT(24)
-+#define SSUSB_CTRL_SS_PHY_EN BIT(8)
-+#define SSUSB_CTRL_SS_PHY_RESET BIT(7)
-+
-+/* SSPHY control registers - Does this need 0x30? */
-+#define SSPHY_CTRL_RX_OVRD_IN_HI(lane) (0x1006 + 0x100 * lane)
-+#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane) (0x1002 + 0x100 * lane)
-+
-+/* SSPHY SoC version specific values */
-+#define SSPHY_RX_EQ_VALUE 4 /* Override value for rx_eq */
-+#define SSPHY_TX_DEEMPH_3_5DB 23 /* Override value for transmit
-+ preemphasis */
-+#define SSPHY_MPLL_VALUE 0 /* Override value for mpll */
-+
-+/* QSCRATCH PHY_PARAM_CTRL1 fields */
-+#define PHY_PARAM_CTRL1_TX_FULL_SWING_MASK 0x07f00000u
-+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK 0x000fc000u
-+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK 0x00003f00u
-+#define PHY_PARAM_CTRL1_LOS_BIAS_MASK 0x000000f8u
-+
-+#define PHY_PARAM_CTRL1_MASK \
-+ (PHY_PARAM_CTRL1_TX_FULL_SWING_MASK | \
-+ PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK | \
-+ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK | \
-+ PHY_PARAM_CTRL1_LOS_BIAS_MASK)
-+
-+#define PHY_PARAM_CTRL1_TX_FULL_SWING(x) \
-+ (((x) << 20) & PHY_PARAM_CTRL1_TX_FULL_SWING_MASK)
-+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB(x) \
-+ (((x) << 14) & PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK)
-+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(x) \
-+ (((x) << 8) & PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK)
-+#define PHY_PARAM_CTRL1_LOS_BIAS(x) \
-+ (((x) << 3) & PHY_PARAM_CTRL1_LOS_BIAS_MASK)
-+
-+/* RX OVRD IN HI bits */
-+#define RX_OVRD_IN_HI_RX_RESET_OVRD BIT(13)
-+#define RX_OVRD_IN_HI_RX_RX_RESET BIT(12)
-+#define RX_OVRD_IN_HI_RX_EQ_OVRD BIT(11)
-+#define RX_OVRD_IN_HI_RX_EQ_MASK 0x0700
-+#define RX_OVRD_IN_HI_RX_EQ_SHIFT 8
-+#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD BIT(7)
-+#define RX_OVRD_IN_HI_RX_EQ_EN BIT(6)
-+#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD BIT(5)
-+#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK 0x0018
-+#define RX_OVRD_IN_HI_RX_RATE_OVRD BIT(2)
-+#define RX_OVRD_IN_HI_RX_RATE_MASK 0x0003
-+
-+/* TX OVRD DRV LO register bits */
-+#define TX_OVRD_DRV_LO_AMPLITUDE_MASK 0x007F
-+#define TX_OVRD_DRV_LO_PREEMPH_MASK 0x3F80
-+#define TX_OVRD_DRV_LO_PREEMPH_SHIFT 7
-+#define TX_OVRD_DRV_LO_EN BIT(14)
-+
-+/* SS CAP register bits */
-+#define SS_CR_CAP_ADDR_REG BIT(0)
-+#define SS_CR_CAP_DATA_REG BIT(0)
-+#define SS_CR_READ_REG BIT(0)
-+#define SS_CR_WRITE_REG BIT(0)
-+
-+struct qcom_dwc3_usb_phy {
-+ struct regmap *base;
-+ struct device *dev;
-+ struct clk *xo_clk;
-+ struct clk *ref_clk;
-+ u32 rx_eq;
-+ u32 tx_deamp_3_5db;
-+ u32 mpll;
-+};
-+
-+struct qcom_dwc3_phy_drvdata {
-+ struct phy_ops ops;
-+ u32 clk_rate;
-+};
-+
-+/**
-+ * Write register and read back masked value to confirm it is written
-+ *
-+ * @base - QCOM DWC3 PHY base virtual address.
-+ * @offset - register offset.
-+ * @mask - register bitmask specifying what should be updated
-+ * @val - value to write.
-+ */
-+static inline void qcom_dwc3_phy_write_readback(
-+ struct qcom_dwc3_usb_phy *phy_dwc3, u32 offset,
-+ const u32 mask, u32 val)
-+{
-+ u32 write_val, tmp;
-+
-+ tmp = regmap_read(phy_dwc3->base, offset, &tmp);
-+ tmp &= ~mask; /* retain other bits */
-+ write_val = tmp | val;
-+
-+ regmap_write(phy_dwc3->base, offset, write_val);
-+
-+ /* Read back to see if val was written */
-+ regmap_read(phy_dwc3->base, offset, &tmp);
-+ tmp &= mask; /* clear other bits */
-+
-+ if (tmp != val)
-+ dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n",
-+ val, offset);
-+}
-+
-+static int wait_for_latch(struct regmap *base, u32 addr)
-+{
-+ u32 retry = 10, data;
-+
-+ while (true) {
-+ regmap_read(base, addr, &data);
-+ if (!data)
-+ break;
-+
-+ if (--retry == 0)
-+ return -ETIMEDOUT;
-+
-+ usleep_range(10, 20);
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * Write SSPHY register
-+ *
-+ * @base - QCOM DWC3 PHY base virtual address.
-+ * @addr - SSPHY address to write.
-+ * @val - value to write.
-+ */
-+static int qcom_dwc3_ss_write_phycreg(struct qcom_dwc3_usb_phy *phy_dwc3,
-+ u32 addr, u32 val)
-+{
-+ int ret;
-+
-+ regmap_write(phy_dwc3->base, CR_PROTOCOL_DATA_IN_REG, addr);
-+ regmap_write(phy_dwc3->base, CR_PROTOCOL_CAP_ADDR_REG, SS_CR_CAP_ADDR_REG);
-+
-+ ret = wait_for_latch(phy_dwc3->base, CR_PROTOCOL_CAP_ADDR_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ regmap_write(phy_dwc3->base, CR_PROTOCOL_DATA_IN_REG, val);
-+ regmap_write(phy_dwc3->base, CR_PROTOCOL_CAP_DATA_REG, SS_CR_CAP_DATA_REG);
-+
-+ ret = wait_for_latch(phy_dwc3->base, CR_PROTOCOL_CAP_DATA_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ regmap_write(phy_dwc3->base, CR_PROTOCOL_WRITE_REG, SS_CR_WRITE_REG);
-+
-+ ret = wait_for_latch(phy_dwc3->base, CR_PROTOCOL_WRITE_REG);
-+
-+err_wait:
-+ if (ret)
-+ dev_err(phy_dwc3->dev, "timeout waiting for latch\n");
-+ return ret;
-+}
-+
-+/**
-+ * Read SSPHY register.
-+ *
-+ * @base - QCOM DWC3 PHY base virtual address.
-+ * @addr - SSPHY address to read.
-+ */
-+static int qcom_dwc3_ss_read_phycreg(struct regmap *base, u32 addr, u32 *val)
-+{
-+ int ret;
-+
-+ regmap_write(base, CR_PROTOCOL_DATA_IN_REG, addr);
-+ regmap_write(base, CR_PROTOCOL_CAP_ADDR_REG, SS_CR_CAP_ADDR_REG);
-+
-+ ret = wait_for_latch(base, CR_PROTOCOL_CAP_ADDR_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ /*
-+ * Due to hardware bug, first read of SSPHY register might be
-+ * incorrect. Hence as workaround, SW should perform SSPHY register
-+ * read twice, but use only second read and ignore first read.
-+ */
-+ regmap_write(base, CR_PROTOCOL_READ_REG, SS_CR_READ_REG);
-+
-+ ret = wait_for_latch(base, CR_PROTOCOL_READ_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ /* throwaway read */
-+ regmap_read(base, CR_PROTOCOL_DATA_OUT_REG, &ret);
-+
-+ regmap_write(base, CR_PROTOCOL_READ_REG, SS_CR_READ_REG);
-+
-+ ret = wait_for_latch(base, CR_PROTOCOL_READ_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ regmap_read(base, CR_PROTOCOL_DATA_OUT_REG, val);
-+
-+err_wait:
-+ return ret;
-+}
-+
-+static int qcom_dwc3_hs_phy_init(struct phy *phy)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+ int ret;
-+ u32 val;
-+
-+ ret = clk_prepare_enable(phy_dwc3->xo_clk);
-+ if (ret)
-+ return ret;
-+
-+ ret = clk_prepare_enable(phy_dwc3->ref_clk);
-+ if (ret) {
-+ clk_disable_unprepare(phy_dwc3->xo_clk);
-+ return ret;
-+ }
-+
-+ /*
-+ * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel
-+ * enable clamping, and disable RETENTION (power-on default is ENABLED)
-+ */
-+ val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP |
-+ HSUSB_CTRL_RETENABLEN | HSUSB_CTRL_COMMONONN |
-+ HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP |
-+ HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID |
-+ HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70;
-+
-+ /* use core clock if external reference is not present */
-+ if (!phy_dwc3->xo_clk)
-+ val |= HSUSB_CTRL_USE_CLKCORE;
-+
-+ regmap_write(phy_dwc3->base, HSUSB_PHY_CTRL_REG, val);
-+ usleep_range(2000, 2200);
-+
-+ /* Disable (bypass) VBUS and ID filters */
-+ regmap_write(phy_dwc3->base, QSCRATCH_GENERAL_CFG, HSUSB_GCFG_XHCI_REV);
-+
-+ return 0;
-+}
-+
-+static int qcom_dwc3_hs_phy_exit(struct phy *phy)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+
-+ clk_disable_unprepare(phy_dwc3->ref_clk);
-+ clk_disable_unprepare(phy_dwc3->xo_clk);
-+
-+ return 0;
-+}
-+
-+static int qcom_dwc3_ss_phy_init(struct phy *phy)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+ int ret;
-+ u32 data = 0;
-+
-+ ret = clk_prepare_enable(phy_dwc3->xo_clk);
-+ if (ret)
-+ return ret;
-+
-+ ret = clk_prepare_enable(phy_dwc3->ref_clk);
-+ if (ret) {
-+ clk_disable_unprepare(phy_dwc3->xo_clk);
-+ return ret;
-+ }
-+
-+ /* reset phy */
-+ regmap_read(phy_dwc3->base, SSUSB_PHY_CTRL_REG, &data);
-+ regmap_write(phy_dwc3->base, SSUSB_PHY_CTRL_REG,
-+ data | SSUSB_CTRL_SS_PHY_RESET);
-+ usleep_range(2000, 2200);
-+ regmap_write(phy_dwc3->base, SSUSB_PHY_CTRL_REG, data);
-+
-+ /* clear REF_PAD if we don't have XO clk */
-+ if (!phy_dwc3->xo_clk)
-+ data &= ~SSUSB_CTRL_REF_USE_PAD;
-+ else
-+ data |= SSUSB_CTRL_REF_USE_PAD;
-+
-+ regmap_write(phy_dwc3->base, SSUSB_PHY_CTRL_REG, data);
-+
-+ /* wait for ref clk to become stable, this can take up to 30ms */
-+ msleep(30);
-+
-+ data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT;
-+ regmap_write(phy_dwc3->base, SSUSB_PHY_CTRL_REG, data);
-+
-+ /*
-+ * WORKAROUND: There is SSPHY suspend bug due to which USB enumerates
-+ * in HS mode instead of SS mode. Workaround it by asserting
-+ * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus mode
-+ */
-+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x102D, &data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ data |= (1 << 7);
-+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x102D, data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x1010, &data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ data &= ~0xff0;
-+ data |= 0x20;
-+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x1010, data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ /*
-+ * Fix RX Equalization setting as follows
-+ * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
-+ * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
-+ * LANE0.RX_OVRD_IN_HI.RX_EQ set based on SoC version
-+ * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
-+ */
-+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base,
-+ SSPHY_CTRL_RX_OVRD_IN_HI(0), &data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ data &= ~RX_OVRD_IN_HI_RX_EQ_EN;
-+ data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD;
-+ data &= ~RX_OVRD_IN_HI_RX_EQ_MASK;
-+ data |= phy_dwc3->rx_eq << RX_OVRD_IN_HI_RX_EQ_SHIFT;
-+ data |= RX_OVRD_IN_HI_RX_EQ_OVRD;
-+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3,
-+ SSPHY_CTRL_RX_OVRD_IN_HI(0), data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ /*
-+ * Set EQ and TX launch amplitudes as follows
-+ * LANE0.TX_OVRD_DRV_LO.PREEMPH set based on SoC version
-+ * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 110
-+ * LANE0.TX_OVRD_DRV_LO.EN set to 1.
-+ */
-+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base,
-+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK;
-+ data |= phy_dwc3->tx_deamp_3_5db << TX_OVRD_DRV_LO_PREEMPH_SHIFT;
-+ data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK;
-+ data |= 0x6E;
-+ data |= TX_OVRD_DRV_LO_EN;
-+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3,
-+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x30, phy_dwc3->mpll);
-+
-+ /*
-+ * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows
-+ * TX_FULL_SWING [26:20] amplitude to 110
-+ * TX_DEEMPH_6DB [19:14] to 32
-+ * TX_DEEMPH_3_5DB [13:8] set based on SoC version
-+ * LOS_BIAS [7:3] to 9
-+ */
-+ regmap_read(phy_dwc3->base, SSUSB_PHY_PARAM_CTRL_1, &data);
-+
-+ data &= ~PHY_PARAM_CTRL1_MASK;
-+
-+ data |= PHY_PARAM_CTRL1_TX_FULL_SWING(0x6e) |
-+ PHY_PARAM_CTRL1_TX_DEEMPH_6DB(0x20) |
-+ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(phy_dwc3->tx_deamp_3_5db) |
-+ PHY_PARAM_CTRL1_LOS_BIAS(0x9);
-+
-+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1,
-+ PHY_PARAM_CTRL1_MASK, data);
-+
-+err_phy_trans:
-+ return ret;
-+}
-+
-+static int qcom_dwc3_ss_phy_exit(struct phy *phy)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+
-+ /* Sequence to put SSPHY in low power state:
-+ * 1. Clear REF_PHY_EN in PHY_CTRL_REG
-+ * 2. Clear REF_USE_PAD in PHY_CTRL_REG
-+ * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention
-+ */
-+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
-+ SSUSB_CTRL_SS_PHY_EN, 0x0);
-+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
-+ SSUSB_CTRL_REF_USE_PAD, 0x0);
-+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
-+ SSUSB_CTRL_TEST_POWERDOWN, 0x0);
-+
-+ clk_disable_unprepare(phy_dwc3->ref_clk);
-+ clk_disable_unprepare(phy_dwc3->xo_clk);
-+
-+ return 0;
-+}
-+
-+static const struct qcom_dwc3_phy_drvdata qcom_dwc3_hs_drvdata = {
-+ .ops = {
-+ .init = qcom_dwc3_hs_phy_init,
-+ .exit = qcom_dwc3_hs_phy_exit,
-+ .owner = THIS_MODULE,
-+ },
-+ .clk_rate = 60000000,
-+};
-+
-+static const struct qcom_dwc3_phy_drvdata qcom_dwc3_ss_drvdata = {
-+ .ops = {
-+ .init = qcom_dwc3_ss_phy_init,
-+ .exit = qcom_dwc3_ss_phy_exit,
-+ .owner = THIS_MODULE,
-+ },
-+ .clk_rate = 125000000,
-+};
-+
-+static const struct of_device_id qcom_dwc3_phy_table[] = {
-+ { .compatible = "qcom,dwc3-hs-usb-phy", .data = &qcom_dwc3_hs_drvdata },
-+ { .compatible = "qcom,dwc3-ss-usb-phy", .data = &qcom_dwc3_ss_drvdata },
-+ { /* Sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, qcom_dwc3_phy_table);
-+
-+static int qcom_dwc3_phy_probe(struct platform_device *pdev)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3;
-+ struct phy_provider *phy_provider;
-+ struct phy *generic_phy;
-+ struct resource *res;
-+ const struct of_device_id *match;
-+ const struct qcom_dwc3_phy_drvdata *data;
-+ struct device_node *np;
-+
-+ phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL);
-+ if (!phy_dwc3)
-+ return -ENOMEM;
-+
-+ match = of_match_node(qcom_dwc3_phy_table, pdev->dev.of_node);
-+ data = match->data;
-+
-+ phy_dwc3->dev = &pdev->dev;
-+
-+ phy_dwc3->base = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "regmap");
-+ if (IS_ERR_OR_NULL(phy_dwc3->base))
-+ return PTR_ERR_OR_ZERO(phy_dwc3->base) ? : -EINVAL;
-+
-+ phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref");
-+ if (IS_ERR(phy_dwc3->ref_clk)) {
-+ dev_dbg(phy_dwc3->dev, "cannot get reference clock\n");
-+ return PTR_ERR(phy_dwc3->ref_clk);
-+ }
-+
-+ clk_set_rate(phy_dwc3->ref_clk, data->clk_rate);
-+
-+ phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo");
-+ if (IS_ERR(phy_dwc3->xo_clk)) {
-+ dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n");
-+ phy_dwc3->xo_clk = NULL;
-+ }
-+
-+ /* Parse device node to probe HSIO settings */
-+ np = of_node_get(pdev->dev.of_node);
-+ if (!of_compat_cmp(match->compatible, "qcom,dwc3-ss-usb-phy",
-+ strlen(match->compatible))) {
-+
-+ if (of_property_read_u32(np, "rx_eq", &phy_dwc3->rx_eq) ||
-+ of_property_read_u32(np, "tx_deamp_3_5db",
-+ &phy_dwc3->tx_deamp_3_5db) ||
-+ of_property_read_u32(np, "mpll", &phy_dwc3->mpll)) {
-+
-+ dev_err(phy_dwc3->dev, "cannot get HSIO settings from device node, using default values\n");
-+
-+ /* Default HSIO settings */
-+ phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE;
-+ phy_dwc3->tx_deamp_3_5db = SSPHY_TX_DEEMPH_3_5DB;
-+ phy_dwc3->mpll = SSPHY_MPLL_VALUE;
-+ }
-+ }
-+
-+ generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node,
-+ &data->ops);
-+
-+ if (IS_ERR(generic_phy))
-+ return PTR_ERR(generic_phy);
-+
-+ phy_set_drvdata(generic_phy, phy_dwc3);
-+ platform_set_drvdata(pdev, phy_dwc3);
-+
-+ phy_provider = devm_of_phy_provider_register(phy_dwc3->dev,
-+ of_phy_simple_xlate);
-+
-+ if (IS_ERR(phy_provider))
-+ return PTR_ERR(phy_provider);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver qcom_dwc3_phy_driver = {
-+ .probe = qcom_dwc3_phy_probe,
-+ .driver = {
-+ .name = "qcom-dwc3-usb-phy",
-+ .owner = THIS_MODULE,
-+ .of_match_table = qcom_dwc3_phy_table,
-+ },
-+};
-+
-+module_platform_driver(qcom_dwc3_phy_driver);
-+
-+MODULE_ALIAS("platform:phy-qcom-dwc3");
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
-+MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
-+MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver");
+++ /dev/null
---- a/drivers/phy/qualcomm/phy-qcom-dwc3.c
-+++ b/drivers/phy/qualcomm/phy-qcom-dwc3.c
-@@ -491,7 +491,6 @@ static int qcom_dwc3_phy_probe(struct pl
- struct qcom_dwc3_usb_phy *phy_dwc3;
- struct phy_provider *phy_provider;
- struct phy *generic_phy;
-- struct resource *res;
- const struct of_device_id *match;
- const struct qcom_dwc3_phy_drvdata *data;
- struct device_node *np;
-@@ -505,7 +504,17 @@ static int qcom_dwc3_phy_probe(struct pl
-
- phy_dwc3->dev = &pdev->dev;
-
-- phy_dwc3->base = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "regmap");
-+ np = of_parse_phandle(pdev->dev.of_node, "regmap", 0);
-+ if (!np)
-+ return -ENODEV;
-+
-+ if (!of_device_is_compatible(np, "syscon"))
-+ return -EINVAL;
-+
-+ phy_dwc3->base = device_node_to_regmap(np);
-+
-+ of_node_put(np);
-+
- if (IS_ERR_OR_NULL(phy_dwc3->base))
- return PTR_ERR_OR_ZERO(phy_dwc3->base) ? : -EINVAL;
-
+ };
+
+ hs_phy_0: hs_phy_0 {
-+ compatible = "qcom,dwc3-hs-usb-phy";
-+ regmap = <&usb3_0>;
++ compatible = "qcom,ipq806x-usb-phy-hs";
++ reg = <0x110f8800 0x30>;
+ clocks = <&gcc USB30_0_UTMI_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
+
+ ss_phy_0: ss_phy_0 {
-+ compatible = "qcom,dwc3-ss-usb-phy";
-+ regmap = <&usb3_0>;
++ compatible = "qcom,ipq806x-usb-phy-ss";
++ reg = <0x110f8830 0x30>;
+ clocks = <&gcc USB30_0_MASTER_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
+
+ hs_phy_1: hs_phy_1 {
-+ compatible = "qcom,dwc3-hs-usb-phy";
-+ regmap = <&usb3_1>;
++ compatible = "qcom,ipq806x-usb-phy-hs";
++ reg = <0x100f8800 0x30>;
+ clocks = <&gcc USB30_1_UTMI_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
+
+ ss_phy_1: ss_phy_1 {
-+ compatible = "qcom,dwc3-ss-usb-phy";
-+ regmap = <&usb3_1>;
++ compatible = "qcom,ipq806x-usb-phy-ss";
++ reg = <0x100f8830 0x30>;
+ clocks = <&gcc USB30_1_MASTER_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
--- /dev/null
+From ef19b117b83466e1c030368101a24367a34be7f0 Mon Sep 17 00:00:00 2001
+From: Ansuel Smith <ansuelsmth@gmail.com>
+Date: Fri, 17 Jul 2020 15:16:31 +0200
+Subject: phy: qualcomm: add qcom ipq806x dwc usb phy driver
+
+This has lost in the original push for the dwc3 qcom driver.
+This is needed for ipq806x SoC as without this the usb ports
+doesn't work at all.
+
+Signed-off-by: Andy Gross <agross@codeaurora.org>
+Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
+Tested-by: Jonathan McDowell <noodles@earth.li>
+Link: https://lore.kernel.org/r/20200717131635.11076-1-ansuelsmth@gmail.com
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+---
+
+Light modification to Kconfig as some config are missing in kernel 5.4
+
+ drivers/phy/qualcomm/Kconfig | 10 +
+ drivers/phy/qualcomm/Makefile | 1 +
+ drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 571 ++++++++++++++++++++++++++++
+ 3 files changed, 582 insertions(+)
+ create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
+
+--- a/drivers/phy/qualcomm/Kconfig
++++ b/drivers/phy/qualcomm/Kconfig
+@@ -91,3 +91,13 @@ config PHY_QCOM_USB_HSIC
+ select GENERIC_PHY
+ help
+ Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
++
++config PHY_QCOM_IPQ806X_USB
++ tristate "Qualcomm IPQ806x DWC3 USB PHY driver"
++ depends on HAS_IOMEM
++ depends on OF && (ARCH_QCOM || COMPILE_TEST)
++ select GENERIC_PHY
++ help
++ This option enables support for the Synopsis PHYs present inside the
++ Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports
++ both HS and SS PHY controllers.
+--- a/drivers/phy/qualcomm/Makefile
++++ b/drivers/phy/qualcomm/Makefile
+@@ -10,3 +10,4 @@ obj-$(CONFIG_PHY_QCOM_UFS_14NM) += phy-
+ obj-$(CONFIG_PHY_QCOM_UFS_20NM) += phy-qcom-ufs-qmp-20nm.o
+ obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
+ obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
++obj-$(CONFIG_PHY_QCOM_IPQ806X_USB) += phy-qcom-ipq806x-usb.o
+--- /dev/null
++++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
+@@ -0,0 +1,571 @@
++// SPDX-License-Identifier: GPL-2.0-only
++
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/of_device.h>
++#include <linux/phy/phy.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/regmap.h>
++#include <linux/mfd/syscon.h>
++
++/* USB QSCRATCH Hardware registers */
++#define QSCRATCH_GENERAL_CFG (0x08)
++#define HSUSB_PHY_CTRL_REG (0x10)
++
++/* PHY_CTRL_REG */
++#define HSUSB_CTRL_DMSEHV_CLAMP BIT(24)
++#define HSUSB_CTRL_USB2_SUSPEND BIT(23)
++#define HSUSB_CTRL_UTMI_CLK_EN BIT(21)
++#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID BIT(20)
++#define HSUSB_CTRL_USE_CLKCORE BIT(18)
++#define HSUSB_CTRL_DPSEHV_CLAMP BIT(17)
++#define HSUSB_CTRL_COMMONONN BIT(11)
++#define HSUSB_CTRL_ID_HV_CLAMP BIT(9)
++#define HSUSB_CTRL_OTGSESSVLD_CLAMP BIT(8)
++#define HSUSB_CTRL_CLAMP_EN BIT(7)
++#define HSUSB_CTRL_RETENABLEN BIT(1)
++#define HSUSB_CTRL_POR BIT(0)
++
++/* QSCRATCH_GENERAL_CFG */
++#define HSUSB_GCFG_XHCI_REV BIT(2)
++
++/* USB QSCRATCH Hardware registers */
++#define SSUSB_PHY_CTRL_REG (0x00)
++#define SSUSB_PHY_PARAM_CTRL_1 (0x04)
++#define SSUSB_PHY_PARAM_CTRL_2 (0x08)
++#define CR_PROTOCOL_DATA_IN_REG (0x0c)
++#define CR_PROTOCOL_DATA_OUT_REG (0x10)
++#define CR_PROTOCOL_CAP_ADDR_REG (0x14)
++#define CR_PROTOCOL_CAP_DATA_REG (0x18)
++#define CR_PROTOCOL_READ_REG (0x1c)
++#define CR_PROTOCOL_WRITE_REG (0x20)
++
++/* PHY_CTRL_REG */
++#define SSUSB_CTRL_REF_USE_PAD BIT(28)
++#define SSUSB_CTRL_TEST_POWERDOWN BIT(27)
++#define SSUSB_CTRL_LANE0_PWR_PRESENT BIT(24)
++#define SSUSB_CTRL_SS_PHY_EN BIT(8)
++#define SSUSB_CTRL_SS_PHY_RESET BIT(7)
++
++/* SSPHY control registers - Does this need 0x30? */
++#define SSPHY_CTRL_RX_OVRD_IN_HI(lane) (0x1006 + 0x100 * (lane))
++#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane) (0x1002 + 0x100 * (lane))
++
++/* SSPHY SoC version specific values */
++#define SSPHY_RX_EQ_VALUE 4 /* Override value for rx_eq */
++/* Override value for transmit preemphasis */
++#define SSPHY_TX_DEEMPH_3_5DB 23
++/* Override value for mpll */
++#define SSPHY_MPLL_VALUE 0
++
++/* QSCRATCH PHY_PARAM_CTRL1 fields */
++#define PHY_PARAM_CTRL1_TX_FULL_SWING_MASK GENMASK(26, 19)
++#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK GENMASK(19, 13)
++#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK GENMASK(13, 7)
++#define PHY_PARAM_CTRL1_LOS_BIAS_MASK GENMASK(7, 2)
++
++#define PHY_PARAM_CTRL1_MASK \
++ (PHY_PARAM_CTRL1_TX_FULL_SWING_MASK | \
++ PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK | \
++ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK | \
++ PHY_PARAM_CTRL1_LOS_BIAS_MASK)
++
++#define PHY_PARAM_CTRL1_TX_FULL_SWING(x) \
++ (((x) << 20) & PHY_PARAM_CTRL1_TX_FULL_SWING_MASK)
++#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB(x) \
++ (((x) << 14) & PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK)
++#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(x) \
++ (((x) << 8) & PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK)
++#define PHY_PARAM_CTRL1_LOS_BIAS(x) \
++ (((x) << 3) & PHY_PARAM_CTRL1_LOS_BIAS_MASK)
++
++/* RX OVRD IN HI bits */
++#define RX_OVRD_IN_HI_RX_RESET_OVRD BIT(13)
++#define RX_OVRD_IN_HI_RX_RX_RESET BIT(12)
++#define RX_OVRD_IN_HI_RX_EQ_OVRD BIT(11)
++#define RX_OVRD_IN_HI_RX_EQ_MASK GENMASK(10, 7)
++#define RX_OVRD_IN_HI_RX_EQ(x) ((x) << 8)
++#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD BIT(7)
++#define RX_OVRD_IN_HI_RX_EQ_EN BIT(6)
++#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD BIT(5)
++#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK GENMASK(4, 2)
++#define RX_OVRD_IN_HI_RX_RATE_OVRD BIT(2)
++#define RX_OVRD_IN_HI_RX_RATE_MASK GENMASK(2, 0)
++
++/* TX OVRD DRV LO register bits */
++#define TX_OVRD_DRV_LO_AMPLITUDE_MASK GENMASK(6, 0)
++#define TX_OVRD_DRV_LO_PREEMPH_MASK GENMASK(13, 6)
++#define TX_OVRD_DRV_LO_PREEMPH(x) ((x) << 7)
++#define TX_OVRD_DRV_LO_EN BIT(14)
++
++/* MPLL bits */
++#define SSPHY_MPLL_MASK GENMASK(8, 5)
++#define SSPHY_MPLL(x) ((x) << 5)
++
++/* SS CAP register bits */
++#define SS_CR_CAP_ADDR_REG BIT(0)
++#define SS_CR_CAP_DATA_REG BIT(0)
++#define SS_CR_READ_REG BIT(0)
++#define SS_CR_WRITE_REG BIT(0)
++
++struct usb_phy {
++ void __iomem *base;
++ struct device *dev;
++ struct clk *xo_clk;
++ struct clk *ref_clk;
++ u32 rx_eq;
++ u32 tx_deamp_3_5db;
++ u32 mpll;
++};
++
++struct phy_drvdata {
++ struct phy_ops ops;
++ u32 clk_rate;
++};
++
++/**
++ * Write register and read back masked value to confirm it is written
++ *
++ * @base - QCOM DWC3 PHY base virtual address.
++ * @offset - register offset.
++ * @mask - register bitmask specifying what should be updated
++ * @val - value to write.
++ */
++static inline void usb_phy_write_readback(struct usb_phy *phy_dwc3,
++ u32 offset,
++ const u32 mask, u32 val)
++{
++ u32 write_val, tmp = readl(phy_dwc3->base + offset);
++
++ tmp &= ~mask; /* retain other bits */
++ write_val = tmp | val;
++
++ writel(write_val, phy_dwc3->base + offset);
++
++ /* Read back to see if val was written */
++ tmp = readl(phy_dwc3->base + offset);
++ tmp &= mask; /* clear other bits */
++
++ if (tmp != val)
++ dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n", val, offset);
++}
++
++static int wait_for_latch(void __iomem *addr)
++{
++ u32 retry = 10;
++
++ while (true) {
++ if (!readl(addr))
++ break;
++
++ if (--retry == 0)
++ return -ETIMEDOUT;
++
++ usleep_range(10, 20);
++ }
++
++ return 0;
++}
++
++/**
++ * Write SSPHY register
++ *
++ * @base - QCOM DWC3 PHY base virtual address.
++ * @addr - SSPHY address to write.
++ * @val - value to write.
++ */
++static int usb_ss_write_phycreg(struct usb_phy *phy_dwc3,
++ u32 addr, u32 val)
++{
++ int ret;
++
++ writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
++ writel(SS_CR_CAP_ADDR_REG,
++ phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
++
++ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
++ if (ret)
++ goto err_wait;
++
++ writel(val, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
++ writel(SS_CR_CAP_DATA_REG,
++ phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
++
++ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
++ if (ret)
++ goto err_wait;
++
++ writel(SS_CR_WRITE_REG, phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
++
++ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
++
++err_wait:
++ if (ret)
++ dev_err(phy_dwc3->dev, "timeout waiting for latch\n");
++ return ret;
++}
++
++/**
++ * Read SSPHY register.
++ *
++ * @base - QCOM DWC3 PHY base virtual address.
++ * @addr - SSPHY address to read.
++ */
++static int usb_ss_read_phycreg(struct usb_phy *phy_dwc3,
++ u32 addr, u32 *val)
++{
++ int ret;
++
++ writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
++ writel(SS_CR_CAP_ADDR_REG,
++ phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
++
++ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
++ if (ret)
++ goto err_wait;
++
++ /*
++ * Due to hardware bug, first read of SSPHY register might be
++ * incorrect. Hence as workaround, SW should perform SSPHY register
++ * read twice, but use only second read and ignore first read.
++ */
++ writel(SS_CR_READ_REG, phy_dwc3->base + CR_PROTOCOL_READ_REG);
++
++ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_READ_REG);
++ if (ret)
++ goto err_wait;
++
++ /* throwaway read */
++ readl(phy_dwc3->base + CR_PROTOCOL_DATA_OUT_REG);
++
++ writel(SS_CR_READ_REG, phy_dwc3->base + CR_PROTOCOL_READ_REG);
++
++ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_READ_REG);
++ if (ret)
++ goto err_wait;
++
++ *val = readl(phy_dwc3->base + CR_PROTOCOL_DATA_OUT_REG);
++
++err_wait:
++ return ret;
++}
++
++static int qcom_ipq806x_usb_hs_phy_init(struct phy *phy)
++{
++ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
++ int ret;
++ u32 val;
++
++ ret = clk_prepare_enable(phy_dwc3->xo_clk);
++ if (ret)
++ return ret;
++
++ ret = clk_prepare_enable(phy_dwc3->ref_clk);
++ if (ret) {
++ clk_disable_unprepare(phy_dwc3->xo_clk);
++ return ret;
++ }
++
++ /*
++ * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel
++ * enable clamping, and disable RETENTION (power-on default is ENABLED)
++ */
++ val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP |
++ HSUSB_CTRL_RETENABLEN | HSUSB_CTRL_COMMONONN |
++ HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP |
++ HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID |
++ HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70;
++
++ /* use core clock if external reference is not present */
++ if (!phy_dwc3->xo_clk)
++ val |= HSUSB_CTRL_USE_CLKCORE;
++
++ writel(val, phy_dwc3->base + HSUSB_PHY_CTRL_REG);
++ usleep_range(2000, 2200);
++
++ /* Disable (bypass) VBUS and ID filters */
++ writel(HSUSB_GCFG_XHCI_REV, phy_dwc3->base + QSCRATCH_GENERAL_CFG);
++
++ return 0;
++}
++
++static int qcom_ipq806x_usb_hs_phy_exit(struct phy *phy)
++{
++ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
++
++ clk_disable_unprepare(phy_dwc3->ref_clk);
++ clk_disable_unprepare(phy_dwc3->xo_clk);
++
++ return 0;
++}
++
++static int qcom_ipq806x_usb_ss_phy_init(struct phy *phy)
++{
++ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
++ int ret;
++ u32 data;
++
++ ret = clk_prepare_enable(phy_dwc3->xo_clk);
++ if (ret)
++ return ret;
++
++ ret = clk_prepare_enable(phy_dwc3->ref_clk);
++ if (ret) {
++ clk_disable_unprepare(phy_dwc3->xo_clk);
++ return ret;
++ }
++
++ /* reset phy */
++ data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++ writel(data | SSUSB_CTRL_SS_PHY_RESET,
++ phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++ usleep_range(2000, 2200);
++ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++
++ /* clear REF_PAD if we don't have XO clk */
++ if (!phy_dwc3->xo_clk)
++ data &= ~SSUSB_CTRL_REF_USE_PAD;
++ else
++ data |= SSUSB_CTRL_REF_USE_PAD;
++
++ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++
++ /* wait for ref clk to become stable, this can take up to 30ms */
++ msleep(30);
++
++ data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT;
++ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++
++ /*
++ * WORKAROUND: There is SSPHY suspend bug due to which USB enumerates
++ * in HS mode instead of SS mode. Workaround it by asserting
++ * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus mode
++ */
++ ret = usb_ss_read_phycreg(phy_dwc3, 0x102D, &data);
++ if (ret)
++ goto err_phy_trans;
++
++ data |= (1 << 7);
++ ret = usb_ss_write_phycreg(phy_dwc3, 0x102D, data);
++ if (ret)
++ goto err_phy_trans;
++
++ ret = usb_ss_read_phycreg(phy_dwc3, 0x1010, &data);
++ if (ret)
++ goto err_phy_trans;
++
++ data &= ~0xff0;
++ data |= 0x20;
++ ret = usb_ss_write_phycreg(phy_dwc3, 0x1010, data);
++ if (ret)
++ goto err_phy_trans;
++
++ /*
++ * Fix RX Equalization setting as follows
++ * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
++ * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
++ * LANE0.RX_OVRD_IN_HI.RX_EQ set based on SoC version
++ * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
++ */
++ ret = usb_ss_read_phycreg(phy_dwc3, SSPHY_CTRL_RX_OVRD_IN_HI(0), &data);
++ if (ret)
++ goto err_phy_trans;
++
++ data &= ~RX_OVRD_IN_HI_RX_EQ_EN;
++ data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD;
++ data &= ~RX_OVRD_IN_HI_RX_EQ_MASK;
++ data |= RX_OVRD_IN_HI_RX_EQ(phy_dwc3->rx_eq);
++ data |= RX_OVRD_IN_HI_RX_EQ_OVRD;
++ ret = usb_ss_write_phycreg(phy_dwc3,
++ SSPHY_CTRL_RX_OVRD_IN_HI(0), data);
++ if (ret)
++ goto err_phy_trans;
++
++ /*
++ * Set EQ and TX launch amplitudes as follows
++ * LANE0.TX_OVRD_DRV_LO.PREEMPH set based on SoC version
++ * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 110
++ * LANE0.TX_OVRD_DRV_LO.EN set to 1.
++ */
++ ret = usb_ss_read_phycreg(phy_dwc3,
++ SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data);
++ if (ret)
++ goto err_phy_trans;
++
++ data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK;
++ data |= TX_OVRD_DRV_LO_PREEMPH(phy_dwc3->tx_deamp_3_5db);
++ data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK;
++ data |= 0x6E;
++ data |= TX_OVRD_DRV_LO_EN;
++ ret = usb_ss_write_phycreg(phy_dwc3,
++ SSPHY_CTRL_TX_OVRD_DRV_LO(0), data);
++ if (ret)
++ goto err_phy_trans;
++
++ data = 0;
++ data &= ~SSPHY_MPLL_MASK;
++ data |= SSPHY_MPLL(phy_dwc3->mpll);
++ usb_ss_write_phycreg(phy_dwc3, 0x30, data);
++
++ /*
++ * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows
++ * TX_FULL_SWING [26:20] amplitude to 110
++ * TX_DEEMPH_6DB [19:14] to 32
++ * TX_DEEMPH_3_5DB [13:8] set based on SoC version
++ * LOS_BIAS [7:3] to 9
++ */
++ data = readl(phy_dwc3->base + SSUSB_PHY_PARAM_CTRL_1);
++
++ data &= ~PHY_PARAM_CTRL1_MASK;
++
++ data |= PHY_PARAM_CTRL1_TX_FULL_SWING(0x6e) |
++ PHY_PARAM_CTRL1_TX_DEEMPH_6DB(0x20) |
++ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(phy_dwc3->tx_deamp_3_5db) |
++ PHY_PARAM_CTRL1_LOS_BIAS(0x9);
++
++ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1,
++ PHY_PARAM_CTRL1_MASK, data);
++
++err_phy_trans:
++ return ret;
++}
++
++static int qcom_ipq806x_usb_ss_phy_exit(struct phy *phy)
++{
++ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
++
++ /* Sequence to put SSPHY in low power state:
++ * 1. Clear REF_PHY_EN in PHY_CTRL_REG
++ * 2. Clear REF_USE_PAD in PHY_CTRL_REG
++ * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention
++ */
++ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
++ SSUSB_CTRL_SS_PHY_EN, 0x0);
++ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
++ SSUSB_CTRL_REF_USE_PAD, 0x0);
++ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
++ SSUSB_CTRL_TEST_POWERDOWN, 0x0);
++
++ clk_disable_unprepare(phy_dwc3->ref_clk);
++ clk_disable_unprepare(phy_dwc3->xo_clk);
++
++ return 0;
++}
++
++static const struct phy_drvdata qcom_ipq806x_usb_hs_drvdata = {
++ .ops = {
++ .init = qcom_ipq806x_usb_hs_phy_init,
++ .exit = qcom_ipq806x_usb_hs_phy_exit,
++ .owner = THIS_MODULE,
++ },
++ .clk_rate = 60000000,
++};
++
++static const struct phy_drvdata qcom_ipq806x_usb_ss_drvdata = {
++ .ops = {
++ .init = qcom_ipq806x_usb_ss_phy_init,
++ .exit = qcom_ipq806x_usb_ss_phy_exit,
++ .owner = THIS_MODULE,
++ },
++ .clk_rate = 125000000,
++};
++
++static const struct of_device_id qcom_ipq806x_usb_phy_table[] = {
++ { .compatible = "qcom,ipq806x-usb-phy-hs",
++ .data = &qcom_ipq806x_usb_hs_drvdata },
++ { .compatible = "qcom,ipq806x-usb-phy-ss",
++ .data = &qcom_ipq806x_usb_ss_drvdata },
++ { /* Sentinel */ }
++};
++MODULE_DEVICE_TABLE(of, qcom_ipq806x_usb_phy_table);
++
++static int qcom_ipq806x_usb_phy_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++ resource_size_t size;
++ struct phy *generic_phy;
++ struct usb_phy *phy_dwc3;
++ const struct phy_drvdata *data;
++ struct phy_provider *phy_provider;
++
++ phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL);
++ if (!phy_dwc3)
++ return -ENOMEM;
++
++ data = of_device_get_match_data(&pdev->dev);
++
++ phy_dwc3->dev = &pdev->dev;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res)
++ return -EINVAL;
++ size = resource_size(res);
++ phy_dwc3->base = devm_ioremap(phy_dwc3->dev, res->start, size);
++
++ if (IS_ERR(phy_dwc3->base)) {
++ dev_err(phy_dwc3->dev, "failed to map reg\n");
++ return PTR_ERR(phy_dwc3->base);
++ }
++
++ phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref");
++ if (IS_ERR(phy_dwc3->ref_clk)) {
++ dev_dbg(phy_dwc3->dev, "cannot get reference clock\n");
++ return PTR_ERR(phy_dwc3->ref_clk);
++ }
++
++ clk_set_rate(phy_dwc3->ref_clk, data->clk_rate);
++
++ phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo");
++ if (IS_ERR(phy_dwc3->xo_clk)) {
++ dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n");
++ phy_dwc3->xo_clk = NULL;
++ }
++
++ /* Parse device node to probe HSIO settings */
++ if (device_property_read_u32(&pdev->dev, "qcom,rx-eq",
++ &phy_dwc3->rx_eq))
++ phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE;
++
++ if (device_property_read_u32(&pdev->dev, "qcom,tx-deamp_3_5db",
++ &phy_dwc3->tx_deamp_3_5db))
++ phy_dwc3->rx_eq = SSPHY_TX_DEEMPH_3_5DB;
++
++ if (device_property_read_u32(&pdev->dev, "qcom,mpll", &phy_dwc3->mpll))
++ phy_dwc3->mpll = SSPHY_MPLL_VALUE;
++
++ generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node, &data->ops);
++
++ if (IS_ERR(generic_phy))
++ return PTR_ERR(generic_phy);
++
++ phy_set_drvdata(generic_phy, phy_dwc3);
++ platform_set_drvdata(pdev, phy_dwc3);
++
++ phy_provider = devm_of_phy_provider_register(phy_dwc3->dev,
++ of_phy_simple_xlate);
++
++ if (IS_ERR(phy_provider))
++ return PTR_ERR(phy_provider);
++
++ return 0;
++}
++
++static struct platform_driver qcom_ipq806x_usb_phy_driver = {
++ .probe = qcom_ipq806x_usb_phy_probe,
++ .driver = {
++ .name = "qcom-ipq806x-usb-phy",
++ .owner = THIS_MODULE,
++ .of_match_table = qcom_ipq806x_usb_phy_table,
++ },
++};
++
++module_platform_driver(qcom_ipq806x_usb_phy_driver);
++
++MODULE_ALIAS("platform:phy-qcom-ipq806x-usb");
++MODULE_LICENSE("GPL v2");
++MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
++MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
++MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver");
--- /dev/null
+From 3d7b0ca5300bd01b176f2b4c10e173db802560d8 Mon Sep 17 00:00:00 2001
+From: Colin Ian King <colin.king@canonical.com>
+Date: Tue, 21 Jul 2020 16:06:13 +0100
+Subject: phy: qualcomm: fix setting of tx_deamp_3_5db when device property
+ read fails
+
+Currently when reading of the device property for "qcom,tx-deamp_3_5db"
+fails the default is being assigned incorrectly to phy_dwc3->rx_eq. This
+looks like a copy-n-paste error and in fact should be assigning the
+default instead to phy_dwc3->tx_deamp_3_5db
+
+Addresses-Coverity: ("Copy-paste error")
+Fixes: ef19b117b834 ("phy: qualcomm: add qcom ipq806x dwc usb phy driver")
+Signed-off-by: Colin Ian King <colin.king@canonical.com>
+Link: https://lore.kernel.org/r/20200721150613.416876-1-colin.king@canonical.com
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+---
+ drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
++++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
+@@ -531,7 +531,7 @@ static int qcom_ipq806x_usb_phy_probe(st
+
+ if (device_property_read_u32(&pdev->dev, "qcom,tx-deamp_3_5db",
+ &phy_dwc3->tx_deamp_3_5db))
+- phy_dwc3->rx_eq = SSPHY_TX_DEEMPH_3_5DB;
++ phy_dwc3->tx_deamp_3_5db = SSPHY_TX_DEEMPH_3_5DB;
+
+ if (device_property_read_u32(&pdev->dev, "qcom,mpll", &phy_dwc3->mpll))
+ phy_dwc3->mpll = SSPHY_MPLL_VALUE;
projects / openwrt / staging / xback.git / commitdiff