ramips: rt305x: add support for Edimax 3G-6200N

Support for Edimax 3G-6200N router with USB.

Signed-off-by: Lukasz Golebiowski <lgolebio@gmail.com>
SVN-Revision: 32682

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 95e504f1da3207b950fba3f3495704b7e3f3897f..68aa0ee863f6f300abd3b58eef22de34744284cf 100755 (executable)
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -30,6 +30,9 @@ status_led_off() {
 
 get_status_led() {
        case $(ramips_board_name) in
+       3g-6200n)
+               status_led="edimax:green:power"
+               ;;
        argus-atp52b)
                status_led="argus-atp52b:green:run"
                ;;

diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index c5d0d6978b45ea75d5f6b9746028270fec1613e3..d7542cab4d3f36671b29bc9582596c97115d7252 100644 (file)
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -48,6 +48,7 @@ case "$FIRMWARE" in
                rt2x00_eeprom_extract "u-boot" 262144 272
                ;;
 
+       3g-6200n | \
        all0256n | \
        argus-atp52b | \
        bc2 | \

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/leds b/target/linux/ramips/base-files/etc/uci-defaults/leds
index fdfce39e8a5789cd8655bf34ef8d0430635e8f56..fbbd09d9eb63decb21eaa4c749a870aedcbb25e6 100755 (executable)
--- a/target/linux/ramips/base-files/etc/uci-defaults/leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/leds
@@ -14,6 +14,10 @@ set_wifi_led() {
 board=$(ramips_board_name)
 
 case $board in
+       3g-6200n)
+               set_wifi_led "edimax:amber:wlan"
+               set_usb_led "edimax:blue:3g"
+               ;;
        all0256n)
                set_wifi_led "rt2800pci-phy0::radio"
                ;;

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index cc3f21215102ef51f5d775d822b83b7a5d32197b..1c65b65a7249b0227c982e0989f91439ca74e63e 100755 (executable)
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -21,6 +21,7 @@ ramips_setup_interfaces()
                ucidef_set_interface_lan "eth0.1"
                ;;
 
+       3g-6200n | \
        argus-atp52b | \
        b2c | \
        nw718 | \
@@ -89,7 +90,7 @@ ramips_setup_macs()
        all0256n)
                lan_mac=$(ramips_get_mac_binary factory 40)
                ;;
-
+       3g-6200n | \
        argus-atp52b | \
        b2c | \
        f5d8235-v1 | \

diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index a605b22f8cc433259775e2ccefc270ceeb001650..db6e5c82f8a1dd799b4cd8b76568ede25f315bae 100644 (file)
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -8,6 +8,10 @@ preinit_set_mac_address() {
        . /lib/ramips.sh
 
        case $(ramips_board_name) in
+       3g-6200n)
+               mac=$(ramips_get_mac_binary factory 4)
+               ifconfig eth0 hw ether $mac 2>/dev/null
+               ;;
        bc2 |\
        esr-9753 |\
        freestation5 |\

diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index a5a173436e11b1f705f7e126fdeb18396b02a1a3..277d9da997c86af45a0225818736aa8814ffe5a5 100755 (executable)
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -47,6 +47,9 @@ ramips_board_name() {
        machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo)
 
        case "$machine" in
+       *"Edimax 3g-6200n")
+               name="3g-6200n"
+               ;;
        *"Allnet ALL0256N")
                name="all0256n"
                ;;

diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 1292b83e79ce7d517e6e433a45c0f1513ef0c8e1..dba5e793b1c3b50a2a197e89ce716cd508f9dbb6 100755 (executable)
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -14,6 +14,7 @@ platform_check_image() {
        [ "$ARGC" -gt 1 ] && return 1
 
        case "$board" in
+       3g-6200n | \
        all0256n | \
        bc2 | \
        dir-300-b1 | \

diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
index d0476f59ba2fadfc06cb45cb9782fa701f0eb840..6ff24f2f9d337d5c070223f0dadf8df66d8aebaf 100644 (file)
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
@@ -21,6 +21,7 @@ enum ramips_mach_type {
        RAMIPS_MACH_WZR_AGL300NH,       /* Buffalo WZR-AGL300NH */
 
        /* RT3050 based machines */
+       RAMIPS_MACH_3G_6200N,           /* Edimax 3G-6200N */
        RAMIPS_MACH_ALL0256N,           /* Allnet ALL0256N */
        RAMIPS_MACH_DIR_300_B1,         /* D-Link DIR-300 B1 */
        RAMIPS_MACH_DIR_600_B1,         /* D-Link DIR-600 B1 */

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
index 15d3a4c2912f1f3d168c7802e100746602565cc2..77269fe5c4c14e874ca45043d596177400582528 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
@@ -2,6 +2,11 @@ if RALINK_RT305X
 
 menu "Ralink RT350x machine selection"
 
+config RT305X_MACH_3G_6200N
+       bool "Edimax 3G-6200N board support"
+       select RALINK_DEV_GPIO_BUTTONS
+       select RALINK_DEV_GPIO_LEDS
+
 config RT305X_MACH_WR6202
        bool "Accton WR6202"
        select RALINK_DEV_GPIO_BUTTONS

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
index 9fe1991fc309496ef7fadfbe3ee87b658be72fad..bb8cf070604108e83dcdcaa270b4c9db01b2887d 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
@@ -11,6 +11,7 @@ obj-y := irq.o setup.o devices.o rt305x.o clock.o
 
 obj-$(CONFIG_EARLY_PRINTK)             += early_printk.o
 
+obj-$(CONFIG_RT305X_MACH_3G_6200N)     += mach-3g-6200n.o
 obj-$(CONFIG_RT305X_MACH_ARGUS_ATP52B) += mach-argus-atp52b.o
 obj-$(CONFIG_RT305X_MACH_BC2)          += mach-bc2.o
 obj-$(CONFIG_RT305X_MACH_ALL0256N)     += mach-all0256n.o

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-3g-6200n.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-3g-6200n.c
new file mode 100644 (file)
index 0000000..ade4fe9
--- /dev/null
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-3g-6200n.c
@@ -0,0 +1,86 @@
+/*
+ *  Edimax 3g-6200n board support
+ *
+ *  Copyright (C) 2011 Andrzej Hajda <andrzej.hajda@wp.pl>
+ *  Copyright (C) 2012 Lukasz Golebiowski <lgolebio@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>
+
+#include "devices.h"
+
+#define EDIMAX_GPIO_BUTTON_WPS 12
+#define EDIMAX_GPIO_BTN_0 13 /* Wifi on/off switch button */
+
+#define EDIMAX_GPIO_LED_POWER  9
+#define EDIMAX_GPIO_LED_WLAN   14
+#define EDIMAX_GPIO_LED_3G     7
+
+#define EDIMAX_KEYS_POLL_INTERVAL   20
+#define EDIMAX_KEYS_DEBOUNCE_INTERVAL (3 * EDIMAX_KEYS_POLL_INTERVAL)
+
+static struct gpio_led edimax_leds_gpio[] __initdata = {
+       {
+               .name           = "edimax:green:power",
+               .gpio           = EDIMAX_GPIO_LED_POWER,
+               .active_low     = 1,
+       }, {
+               .name           = "edimax:amber:wlan",
+               .gpio           = EDIMAX_GPIO_LED_WLAN,
+               .active_low     = 1,
+       }, {
+               .name           = "edimax:blue:3g",
+               .gpio           = EDIMAX_GPIO_LED_3G,
+               .active_low     = 1,
+       }
+};
+
+static struct gpio_keys_button edimax_gpio_buttons[] __initdata = {
+       {
+               .desc           = "wps",
+               .type           = EV_KEY,
+               .code           = KEY_WPS_BUTTON,
+               .debounce_interval = EDIMAX_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = EDIMAX_GPIO_BUTTON_WPS,
+               .active_low     = 1,
+       }, {
+               .desc           = "wlanswitch",
+               .type           = EV_KEY,
+               .code           = BTN_0,
+               .debounce_interval = EDIMAX_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = EDIMAX_GPIO_BTN_0,
+               .active_low     = 1,
+       }
+};
+
+static void __init edimax_init(void)
+{
+       rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
+
+       rt305x_register_flash(0);
+       rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
+       rt305x_register_ethernet();
+       ramips_register_gpio_leds(-1, ARRAY_SIZE(edimax_leds_gpio),
+                                 edimax_leds_gpio);
+       ramips_register_gpio_buttons(-1, EDIMAX_KEYS_POLL_INTERVAL,
+                                    ARRAY_SIZE(edimax_gpio_buttons),
+                                    edimax_gpio_buttons);
+       rt305x_register_wifi();
+       rt305x_register_wdt();
+       rt305x_register_usb();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_3G_6200N, "3G-6200N", "Edimax 3g-6200n",
+             edimax_init);

diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index bf86134267f6324c9bf950413c9ef43ba764b91e..ce817282d3f961890ed95c0994c9f4bd3c890d25 100644 (file)
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -124,6 +124,11 @@ define BuildFirmware/GENERIC_8M/initramfs
        $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M)))
 endef
 
+mtdlayout_edimax_3g6200n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2752k(rootfs),128k@0x3e0000(cimage)ro,3648k@0x50000(firmware)
+define BuildFirmware/3G6200N
+       $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_edimax_3g6200n)),917504,2818048)
+endef
+
 mtdlayout_argus_atp52b=192k(bootloader)ro,64k(config),64k(factory),1152k(kernel),6656k(rootfs),7808k@0x50000(firmware)
 mtd_argus_atp52b_kernel_part_size=1179648
 mtd_argus_atp52b_rootfs_part_size=6815744
@@ -312,6 +317,10 @@ endif
 #
 # RT305X Profiles
 #
+define Image/Build/Profile/3G6200N
+       $(call Image/Build/Template/$(fs_squash)/$(1),3G6200N,3g-6200n,3G-6200N,ttyS1,57600,phys)
+endef
+
 define Image/Build/Profile/ALL0256N
        $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,all0256n,ALL0256N,ttyS1,57600,spi)
 endef
@@ -444,6 +453,7 @@ endef
 
 ifeq ($(CONFIG_RALINK_RT305X),y)
 define Image/Build/Profile/Default
+       $(call Image/Build/Profile/3G6200N,$(1))
        $(call Image/Build/Profile/ALL0256N,$(1))
        $(call Image/Build/Profile/ARGUS_ATP52B,$(1))
        $(call Image/Build/Profile/BC2,$(1))

diff --git a/target/linux/ramips/rt305x/config-3.3 b/target/linux/ramips/rt305x/config-3.3
index 019f899301603f7934a5c3fe4832ba19e8d88c3f..3ad2857a3989f36eec520a852ab169a9802f5794 100644 (file)
--- a/target/linux/ramips/rt305x/config-3.3
+++ b/target/linux/ramips/rt305x/config-3.3
@@ -87,6 +87,7 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y
 CONFIG_RALINK_RT305X=y
 # CONFIG_RALINK_RT3883 is not set
 CONFIG_RAMIPS_WDT=y
+CONFIG_RT305X_MACH_3G_6200N=y
 CONFIG_RT305X_MACH_ALL0256N=y
 CONFIG_RT305X_MACH_ARGUS_ATP52B=y
 CONFIG_RT305X_MACH_BC2=y