LINUX_VERSION-4.14 = .172
LINUX_VERSION-4.19 = .108
-LINUX_VERSION-5.4 = .31
+LINUX_VERSION-5.4 = .32
LINUX_KERNEL_HASH-4.14.172 = 2318a1ab937580a079351ed20557c336a3d95b664f667b14e3ba49e3271b217a
LINUX_KERNEL_HASH-4.19.108 = 09aeeca5b08efea2f54b977b2999afb60d42f93b9f65b2b0111969f183f750a3
-LINUX_KERNEL_HASH-5.4.31 = a11083f8f809887f6a0f8d4467532385b99418f17998fe6e837807491c276eeb
+LINUX_KERNEL_HASH-5.4.32 = 192d99fab7a47a537493b6d7eddb52892b98f8ada655c0bbb419b360a995f2b3
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))
drivers/spi/spi-ath79.c | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
-Index: linux-5.4.22/drivers/spi/spi-ath79.c
-===================================================================
---- linux-5.4.22.orig/drivers/spi/spi-ath79.c
-+++ linux-5.4.22/drivers/spi/spi-ath79.c
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
@@ -15,6 +15,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
static enum dsa_tag_protocol
mtk_get_tag_protocol(struct dsa_switch *ds, int port)
{
-@@ -1606,6 +1664,8 @@ static const struct dsa_switch_ops mt753
+@@ -1609,6 +1667,8 @@ static const struct dsa_switch_ops mt753
.port_vlan_prepare = mt7530_port_vlan_prepare,
.port_vlan_add = mt7530_port_vlan_add,
.port_vlan_del = mt7530_port_vlan_del,
+++ /dev/null
-From 0452800f6db4ed0a42ffb15867c0acfd68829f6a Mon Sep 17 00:00:00 2001
-From: Chuanhong Guo <gch981213@gmail.com>
-Date: Fri, 3 Apr 2020 19:28:24 +0800
-Subject: net: dsa: mt7530: fix null pointer dereferencing in port5 setup
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The 2nd gmac of mediatek soc ethernet may not be connected to a PHY
-and a phy-handle isn't always available.
-Unfortunately, mt7530 dsa driver assumes that the 2nd gmac is always
-connected to switch port 5 and setup mt7530 according to phy address
-of 2nd gmac node, causing null pointer dereferencing when phy-handle
-isn't defined in dts.
-This commit fix this setup code by checking return value of
-of_parse_phandle before using it.
-
-Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5")
-Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
-Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Tested-by: René van Dorst <opensource@vdorst.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1411,6 +1411,9 @@ mt7530_setup(struct dsa_switch *ds)
- continue;
-
- phy_node = of_parse_phandle(mac_np, "phy-handle", 0);
-+ if (!phy_node)
-+ continue;
-+
- if (phy_node->parent == priv->dev->of_node->parent) {
- interface = of_get_phy_mode(mac_np);
- id = of_mdio_parse_addr(ds->dev, phy_node);
drivers/pinctrl/qcom/pinctrl-msm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
-index 1a948c3f54b7..9f1c9951949e 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
-@@ -692,7 +692,7 @@ static void msm_gpio_update_dual_edge_pos(struct msm_pinctrl *pctrl,
+@@ -688,7 +688,7 @@ static void msm_gpio_update_dual_edge_po
pol = msm_readl_intr_cfg(pctrl, g);
pol ^= BIT(g->intr_polarity_bit);
val2 = msm_readl_io(pctrl, g) & BIT(g->in_bit);
intstat = msm_readl_intr_status(pctrl, g);
---
-2.25.1
-
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -2286,6 +2286,8 @@ static const struct flash_info spi_nor_i
+@@ -2313,6 +2313,8 @@ static const struct flash_info spi_nor_i
{ "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },