* 16MB limitation and we don't need bounce buffers.
*/
-/*
- * History:
- * v0.01: Initial version
- * only tested on Alpha Noname Board
- * v0.02: changed IRQ handling for new interrupt scheme (dev_id)
- * tested on a ASUS SP3G
- * v0.10: fixed an odd problem with the 79C974 in a Compaq Deskpro XL
- * looks like the 974 doesn't like stopping and restarting in a
- * short period of time; now we do a reinit of the lance; the
- * bug was triggered by doing ifconfig eth0 <ip> broadcast <addr>
- * and hangs the machine (thanks to Klaus Liedl for debugging)
- * v0.12: by suggestion from Donald Becker: Renamed driver to pcnet32,
- * made it standalone (no need for lance.c)
- * v0.13: added additional PCI detecting for special PCI devices (Compaq)
- * v0.14: stripped down additional PCI probe (thanks to David C Niemi
- * and sveneric@xs4all.nl for testing this on their Compaq boxes)
- * v0.15: added 79C965 (VLB) probe
- * added interrupt sharing for PCI chips
- * v0.16: fixed set_multicast_list on Alpha machines
- * v0.17: removed hack from dev.c; now pcnet32 uses ethif_probe in Space.c
- * v0.19: changed setting of autoselect bit
- * v0.20: removed additional Compaq PCI probe; there is now a working one
- * in arch/i386/bios32.c
- * v0.21: added endian conversion for ppc, from work by cort@cs.nmt.edu
- * v0.22: added printing of status to ring dump
- * v0.23: changed enet_statistics to net_devive_stats
- * v0.90: added multicast filter
- * added module support
- * changed irq probe to new style
- * added PCnetFast chip id
- * added fix for receive stalls with Intel saturn chipsets
- * added in-place rx skbs like in the tulip driver
- * minor cleanups
- * v0.91: added PCnetFast+ chip id
- * back port to 2.0.x
- * v1.00: added some stuff from Donald Becker's 2.0.34 version
- * added support for byte counters in net_dev_stats
- * v1.01: do ring dumps, only when debugging the driver
- * increased the transmit timeout
- * v1.02: fixed memory leak in pcnet32_init_ring()
- * v1.10: workaround for stopped transmitter
- * added port selection for modules
- * detect special T1/E1 WAN card and setup port selection
- * v1.11: fixed wrong checking of Tx errors
- * v1.20: added check of return value kmalloc (cpeterso@cs.washington.edu)
- * added save original kmalloc addr for freeing (mcr@solidum.com)
- * added support for PCnetHome chip (joe@MIT.EDU)
- * rewritten PCI card detection
- * added dwio mode to get driver working on some PPC machines
- * v1.21: added mii selection and mii ioctl
- * v1.22: changed pci scanning code to make PPC people happy
- * fixed switching to 32bit mode in pcnet32_open() (thanks
- * to Michael Richard <mcr@solidum.com> for noticing this one)
- * added sub vendor/device id matching (thanks again to
- * Michael Richard <mcr@solidum.com>)
- * added chip id for 79c973/975 (thanks to Zach Brown <zab@zabbo.net>)
- * v1.23 fixed small bug, when manual selecting MII speed/duplex
- * v1.24 Applied Thomas' patch to use TxStartPoint and thus decrease TxFIFO
- * underflows. Added tx_start_pt module parameter. Increased
- * TX_RING_SIZE from 16 to 32. Added #ifdef'd code to use DXSUFLO
- * for FAST[+] chipsets. <kaf@fc.hp.com>
- * v1.24ac Added SMP spinlocking - Alan Cox <alan@redhat.com>
- * v1.25kf Added No Interrupt on successful Tx for some Tx's <kaf@fc.hp.com>
- * v1.26 Converted to pci_alloc_consistent, Jamey Hicks / George France
- * <jamey@crl.dec.com>
- * - Fixed a few bugs, related to running the controller in 32bit mode.
- * 23 Oct, 2000. Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- * v1.26p Fix oops on rmmod+insmod; plug i/o resource leak - Paul Gortmaker
- * v1.27 improved CSR/PROM address detection, lots of cleanups,
- * new pcnet32vlb module option, HP-PARISC support,
- * added module parameter descriptions,
- * initial ethtool support - Helge Deller <deller@gmx.de>
- * v1.27a Sun Feb 10 2002 Go Taniguchi <go@turbolinux.co.jp>
- * use alloc_etherdev and register_netdev
- * fix pci probe not increment cards_found
- * FD auto negotiate error workaround for xSeries250
- * clean up and using new mii module
- * v1.27b Sep 30 2002 Kent Yoder <yoder1@us.ibm.com>
- * Added timer for cable connection state changes.
- * v1.28 20 Feb 2004 Don Fry <brazilnut@us.ibm.com>
- * Jon Mason <jonmason@us.ibm.com>, Chinmay Albal <albal@in.ibm.com>
- * Now uses ethtool_ops, netif_msg_* and generic_mii_ioctl.
- * Fixes bogus 'Bus master arbitration failure', pci_[un]map_single
- * length errors, and transmit hangs. Cleans up after errors in open.
- * Jim Lewis <jklewis@us.ibm.com> added ethernet loopback test.
- * Thomas Munck Steenholdt <tmus@tmus.dk> non-mii ioctl corrections.
- * v1.29 6 Apr 2004 Jim Lewis <jklewis@us.ibm.com> added physical
- * identification code (blink led's) and register dump.
- * Don Fry added timer for 971/972 so skbufs don't remain on tx ring
- * forever.
- * v1.30 18 May 2004 Don Fry removed timer and Last Transmit Interrupt
- * (ltint) as they added complexity and didn't give good throughput.
- * v1.30a 22 May 2004 Don Fry limit frames received during interrupt.
- * v1.30b 24 May 2004 Don Fry fix bogus tx carrier errors with 79c973,
- * assisted by Bruce Penrod <bmpenrod@endruntechnologies.com>.
- * v1.30c 25 May 2004 Don Fry added netif_wake_queue after pcnet32_restart.
- * v1.30d 01 Jun 2004 Don Fry discard oversize rx packets.
- * v1.30e 11 Jun 2004 Don Fry recover after fifo error and rx hang.
- * v1.30f 16 Jun 2004 Don Fry cleanup IRQ to allow 0 and 1 for PCI,
- * expanding on suggestions from Ralf Baechle <ralf@linux-mips.org>,
- * and Brian Murphy <brian@murphy.dk>.
- * v1.30g 22 Jun 2004 Patrick Simmons <psimmons@flash.net> added option
- * homepna for selecting HomePNA mode for PCNet/Home 79C978.
- * v1.30h 24 Jun 2004 Don Fry correctly select auto, speed, duplex in bcr32.
- * v1.30i 28 Jun 2004 Don Fry change to use module_param.
- * v1.30j 29 Apr 2005 Don Fry fix skb/map leak with loopback test.
- * v1.31 02 Sep 2005 Hubert WS Lin <wslin@tw.ibm.c0m> added set_ringparam().
- * v1.31a 12 Sep 2005 Hubert WS Lin <wslin@tw.ibm.c0m> set min ring size to 4
- * to allow loopback test to work unchanged.
- * v1.31b 06 Oct 2005 Don Fry changed alloc_ring to show name of device
- * if allocation fails
- * v1.31c 01 Nov 2005 Don Fry Allied Telesyn 2700/2701 FX are 100Mbit only.
- * Force 100Mbit FD if Auto (ASEL) is selected.
- * See Bugzilla 2669 and 4551.
- * v1.32 18 Mar2006 Thomas Bogendoerfer and Don Fry added Multi-Phy
- * handling for supporting AT-270x FTX cards with FX and Tx PHYs.
- * Philippe Seewer assisted with auto negotiation and testing.
- */
-
/*
* Set the number of Tx and Rx buffers, using Log_2(# buffers).
* Reasonable default values are 4 Tx buffers, and 16 Rx buffers.
/* The PCNET32 Rx and Tx ring descriptors. */
struct pcnet32_rx_head {
- u32 base;
- s16 buf_length;
- s16 status;
- u32 msg_length;
- u32 reserved;
+ u32 base;
+ s16 buf_length;
+ s16 status;
+ u32 msg_length;
+ u32 reserved;
};
struct pcnet32_tx_head {
- u32 base;
- s16 length;
- s16 status;
- u32 misc;
- u32 reserved;
+ u32 base;
+ s16 length;
+ s16 status;
+ u32 misc;
+ u32 reserved;
};
/* The PCNET32 32-Bit initialization block, described in databook. */
struct pcnet32_init_block {
- u16 mode;
- u16 tlen_rlen;
- u8 phys_addr[6];
- u16 reserved;
- u32 filter[2];
+ u16 mode;
+ u16 tlen_rlen;
+ u8 phys_addr[6];
+ u16 reserved;
+ u32 filter[2];
/* Receive and transmit ring base, along with extra bits. */
- u32 rx_ring;
- u32 tx_ring;
+ u32 rx_ring;
+ u32 tx_ring;
};
/* PCnet32 access functions */
struct pcnet32_private {
struct pcnet32_init_block init_block;
/* The Tx and Rx ring entries must be aligned on 16-byte boundaries in 32bit mode. */
- struct pcnet32_rx_head *rx_ring;
- struct pcnet32_tx_head *tx_ring;
- dma_addr_t dma_addr; /* DMA address of beginning of this
- object, returned by
- pci_alloc_consistent */
- struct pci_dev *pci_dev; /* Pointer to the associated pci device
- structure */
- const char *name;
+ struct pcnet32_rx_head *rx_ring;
+ struct pcnet32_tx_head *tx_ring;
+ dma_addr_t dma_addr;/* DMA address of beginning of this
+ object, returned by pci_alloc_consistent */
+ struct pci_dev *pci_dev;
+ const char *name;
/* The saved address of a sent-in-place packet/buffer, for skfree(). */
- struct sk_buff **tx_skbuff;
- struct sk_buff **rx_skbuff;
- dma_addr_t *tx_dma_addr;
- dma_addr_t *rx_dma_addr;
- struct pcnet32_access a;
- spinlock_t lock; /* Guard lock */
- unsigned int cur_rx, cur_tx; /* The next free ring entry */
- unsigned int rx_ring_size; /* current rx ring size */
- unsigned int tx_ring_size; /* current tx ring size */
- unsigned int rx_mod_mask; /* rx ring modular mask */
- unsigned int tx_mod_mask; /* tx ring modular mask */
- unsigned short rx_len_bits;
- unsigned short tx_len_bits;
- dma_addr_t rx_ring_dma_addr;
- dma_addr_t tx_ring_dma_addr;
- unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */
- struct net_device_stats stats;
- char tx_full;
- char phycount; /* number of phys found */
- int options;
- unsigned int shared_irq:1, /* shared irq possible */
- dxsuflo:1, /* disable transmit stop on uflo */
- mii:1; /* mii port available */
- struct net_device *next;
- struct mii_if_info mii_if;
- struct timer_list watchdog_timer;
- struct timer_list blink_timer;
- u32 msg_enable; /* debug message level */
+ struct sk_buff **tx_skbuff;
+ struct sk_buff **rx_skbuff;
+ dma_addr_t *tx_dma_addr;
+ dma_addr_t *rx_dma_addr;
+ struct pcnet32_access a;
+ spinlock_t lock; /* Guard lock */
+ unsigned int cur_rx, cur_tx; /* The next free ring entry */
+ unsigned int rx_ring_size; /* current rx ring size */
+ unsigned int tx_ring_size; /* current tx ring size */
+ unsigned int rx_mod_mask; /* rx ring modular mask */
+ unsigned int tx_mod_mask; /* tx ring modular mask */
+ unsigned short rx_len_bits;
+ unsigned short tx_len_bits;
+ dma_addr_t rx_ring_dma_addr;
+ dma_addr_t tx_ring_dma_addr;
+ unsigned int dirty_rx, /* ring entries to be freed. */
+ dirty_tx;
+
+ struct net_device_stats stats;
+ char tx_full;
+ char phycount; /* number of phys found */
+ int options;
+ unsigned int shared_irq:1, /* shared irq possible */
+ dxsuflo:1, /* disable transmit stop on uflo */
+ mii:1; /* mii port available */
+ struct net_device *next;
+ struct mii_if_info mii_if;
+ struct timer_list watchdog_timer;
+ struct timer_list blink_timer;
+ u32 msg_enable; /* debug message level */
/* each bit indicates an available PHY */
- u32 phymask;
+ u32 phymask;
};
static void pcnet32_probe_vlbus(void);
projects / openwrt / staging / blogic.git / commitdiff