ipq40xx: add label MAC address for Netgear EX6100v2/EX6150v2

This is based on the EX6150v2, which should be identical to
the EX6100v2:

The device bears two MAC addresses ("MAC 1" and "MAC 2") that
correspond to phy0 and phy1.

The ethernet MAC address (gmac0) is the same as phy0.
As this one is accessible via local-mac-address in gmac0, the
latter is used for label-mac-device.

(Although this is a one-port, gmac1 also has a local-mac-address
assigned. This has the same vendor part as the other addresses,
but completely different data for the device part.)

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
index edc1af60febf5fdd22a2be5817d93d90741c0bd6..cc70080c9210e793a0debc8bb45d798bb4ef8b39 100644 (file)
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
+++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
@@ -78,6 +78,7 @@
                led-failsafe = &power_amber;
                led-running = &power_green;
                led-upgrade = &power_amber;
+               label-mac-device = &gmac0;
        };
 
        keys {