--- /dev/null
+From 486c150478777ef53cfef6f0d46840b9406b0612 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Thu, 27 Dec 2012 10:42:24 +0100
+Subject: [PATCH] spi/ath79: add delay between SCK changes
+
+commit 440114fdb13cbc53ea734bcc05b86bcf5b1e430c upstream.
+
+The driver uses the "as fast as it can" approach
+to drive the SCK signal. However this does not
+work with certain low speed SPI chips (e.g. the
+PCF2123 RTC chip).
+
+The patch adds per-bit slowdowns in order to be
+able to use the driver with such chips as well.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+---
+ drivers/spi/spi-ath79.c | 44 +++++++++++++++++++++++++++++++++++++++++++-
+ 1 file changed, 43 insertions(+), 1 deletion(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -24,17 +24,24 @@
+ #include <linux/spi/spi_bitbang.h>
+ #include <linux/bitops.h>
+ #include <linux/gpio.h>
++#include <linux/clk.h>
++#include <linux/err.h>
+
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include <asm/mach-ath79/ath79_spi_platform.h>
+
+ #define DRV_NAME "ath79-spi"
+
++#define ATH79_SPI_RRW_DELAY_FACTOR 12000
++#define MHZ (1000 * 1000)
++
+ struct ath79_spi {
+ struct spi_bitbang bitbang;
+ u32 ioc_base;
+ u32 reg_ctrl;
+ void __iomem *base;
++ struct clk *clk;
++ unsigned rrw_delay;
+ };
+
+ static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg)
+@@ -52,6 +59,12 @@ static inline struct ath79_spi *ath79_sp
+ return spi_master_get_devdata(spi->master);
+ }
+
++static inline void ath79_spi_delay(struct ath79_spi *sp, unsigned nsecs)
++{
++ if (nsecs > sp->rrw_delay)
++ ndelay(nsecs - sp->rrw_delay);
++}
++
+ static void ath79_spi_chipselect(struct spi_device *spi, int is_active)
+ {
+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+@@ -184,7 +197,9 @@ static u32 ath79_spi_txrx_mode0(struct s
+
+ /* setup MSB (to slave) on trailing edge */
+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
++ ath79_spi_delay(sp, nsecs);
+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK);
++ ath79_spi_delay(sp, nsecs);
+
+ word <<= 1;
+ }
+@@ -198,6 +213,7 @@ static int ath79_spi_probe(struct platfo
+ struct ath79_spi *sp;
+ struct ath79_spi_platform_data *pdata;
+ struct resource *r;
++ unsigned long rate;
+ int ret;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(*sp));
+@@ -236,12 +252,36 @@ static int ath79_spi_probe(struct platfo
+ goto err_put_master;
+ }
+
++ sp->clk = clk_get(&pdev->dev, "ahb");
++ if (IS_ERR(sp->clk)) {
++ ret = PTR_ERR(sp->clk);
++ goto err_unmap;
++ }
++
++ ret = clk_enable(sp->clk);
++ if (ret)
++ goto err_clk_put;
++
++ rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ);
++ if (!rate) {
++ ret = -EINVAL;
++ goto err_clk_disable;
++ }
++
++ sp->rrw_delay = ATH79_SPI_RRW_DELAY_FACTOR / rate;
++ dev_dbg(&pdev->dev, "register read/write delay is %u nsecs\n",
++ sp->rrw_delay);
++
+ ret = spi_bitbang_start(&sp->bitbang);
+ if (ret)
+- goto err_unmap;
++ goto err_clk_disable;
+
+ return 0;
+
++err_clk_disable:
++ clk_disable(sp->clk);
++err_clk_put:
++ clk_put(sp->clk);
+ err_unmap:
+ iounmap(sp->base);
+ err_put_master:
+@@ -256,6 +296,8 @@ static int ath79_spi_remove(struct platf
+ struct ath79_spi *sp = platform_get_drvdata(pdev);
+
+ spi_bitbang_stop(&sp->bitbang);
++ clk_disable(sp->clk);
++ clk_put(sp->clk);
+ iounmap(sp->base);
+ platform_set_drvdata(pdev, NULL);
+ spi_master_put(sp->bitbang.master);
--- /dev/null
+From c7c943b1e3813ff5764ee6417a14530cb7cd6f57 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Thu, 27 Dec 2012 10:42:25 +0100
+Subject: [PATCH] spi/ath79: add missing HIGH->LOW SCK transition
+
+commit 72611db0eef21f4456d79ba302af4b34ea384f30 upstream.
+
+The 'ath79_spi_txrx_mode0' function does not
+set the SCK signal to LOW at the end of a word
+transfer. This causes communications errors with
+certain devices (e.g. the PCF2123 RTC chip).
+
+The patch ensures that the SCK signal will be LOW.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+---
+ drivers/spi/spi-ath79.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -200,6 +200,8 @@ static u32 ath79_spi_txrx_mode0(struct s
+ ath79_spi_delay(sp, nsecs);
+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK);
+ ath79_spi_delay(sp, nsecs);
++ if (bits == 1)
++ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
+
+ word <<= 1;
+ }
--- /dev/null
+From 622d87da7f99b29dde053881bf42c46de7572ce5 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Thu, 27 Dec 2012 10:42:26 +0100
+Subject: [PATCH] spi/ath79: remove superfluous chip select code
+
+commit f1e8fc9898fd8ca78b7438d3c2e60028d3ae2a34 upstream.
+
+The spi_bitbang driver calls the chipselect function
+of the driver from spi_bitbang_setup in order to
+deselect the given SPI chip, so we don't have to
+initialize the CS line here.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+---
+ drivers/spi/spi-ath79.c | 6 ------
+ 1 file changed, 6 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -128,12 +128,6 @@ static int ath79_spi_setup_cs(struct spi
+ gpio_free(cdata->gpio);
+ return status;
+ }
+- } else {
+- if (spi->mode & SPI_CS_HIGH)
+- sp->ioc_base |= AR71XX_SPI_IOC_CS0;
+- else
+- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
+- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
+ }
+
+ return 0;
--- /dev/null
+From f0b166c931c9971f2ae9614881565d23f58b3178 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Thu, 27 Dec 2012 10:42:27 +0100
+Subject: [PATCH] spi/ath79: use gpio_request_one
+
+commit 95d79419feffb326a3d5cb50e2248129dec06bb0 upstream.
+
+Use gpio_request_one() instead of multiple gpiolib calls.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+---
+ drivers/spi/spi-ath79.c | 22 +++++++++++-----------
+ 1 file changed, 11 insertions(+), 11 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -100,6 +100,7 @@ static int ath79_spi_setup_cs(struct spi
+ {
+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+ struct ath79_spi_controller_data *cdata;
++ int status;
+
+ cdata = spi->controller_data;
+ if (spi->chip_select && !cdata)
+@@ -115,22 +116,21 @@ static int ath79_spi_setup_cs(struct spi
+ /* TODO: setup speed? */
+ ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
+
++ status = 0;
+ if (spi->chip_select) {
+- int status = 0;
++ unsigned long flags;
+
+- status = gpio_request(cdata->gpio, dev_name(&spi->dev));
+- if (status)
+- return status;
+-
+- status = gpio_direction_output(cdata->gpio,
+- spi->mode & SPI_CS_HIGH);
+- if (status) {
+- gpio_free(cdata->gpio);
+- return status;
+- }
++ flags = GPIOF_DIR_OUT;
++ if (spi->mode & SPI_CS_HIGH)
++ flags |= GPIOF_INIT_HIGH;
++ else
++ flags |= GPIOF_INIT_LOW;
++
++ status = gpio_request_one(cdata->gpio, flags,
++ dev_name(&spi->dev));
+ }
+
+- return 0;
++ return status;
+ }
+
+ static void ath79_spi_cleanup_cs(struct spi_device *spi)
--- /dev/null
+From d731c08cf1d264fd6113b9a97790c5a3a86ea520 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Thu, 27 Dec 2012 10:42:28 +0100
+Subject: [PATCH] spi/ath79: avoid multiple initialization of the SPI
+ controller
+
+commit c4a31f43005512b366e8bfc346e7f14c1a7a1ba7 upstream.
+
+Currently we are initializing the SPI controller in
+the chip select line function, and that function is
+called once for each SPI device on the bus. If a
+board has multiple SPI devices, the controller will
+be initialized multiple times.
+
+Introduce ath79_spi_{en,dis}able helper functions,
+and call those from probe/response in order to avoid
+the mutliple initialization of the controller.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+---
+ drivers/spi/spi-ath79.c | 41 ++++++++++++++++++++++++-----------------
+ 1 file changed, 24 insertions(+), 17 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -96,16 +96,8 @@ static void ath79_spi_chipselect(struct
+
+ }
+
+-static int ath79_spi_setup_cs(struct spi_device *spi)
++static void ath79_spi_enable(struct ath79_spi *sp)
+ {
+- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+- struct ath79_spi_controller_data *cdata;
+- int status;
+-
+- cdata = spi->controller_data;
+- if (spi->chip_select && !cdata)
+- return -EINVAL;
+-
+ /* enable GPIO mode */
+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
+
+@@ -115,6 +107,24 @@ static int ath79_spi_setup_cs(struct spi
+
+ /* TODO: setup speed? */
+ ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
++}
++
++static void ath79_spi_disable(struct ath79_spi *sp)
++{
++ /* restore CTRL register */
++ ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
++ /* disable GPIO mode */
++ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
++}
++
++static int ath79_spi_setup_cs(struct spi_device *spi)
++{
++ struct ath79_spi_controller_data *cdata;
++ int status;
++
++ cdata = spi->controller_data;
++ if (spi->chip_select && !cdata)
++ return -EINVAL;
+
+ status = 0;
+ if (spi->chip_select) {
+@@ -135,17 +145,10 @@ static int ath79_spi_setup_cs(struct spi
+
+ static void ath79_spi_cleanup_cs(struct spi_device *spi)
+ {
+- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+-
+ if (spi->chip_select) {
+ struct ath79_spi_controller_data *cdata = spi->controller_data;
+ gpio_free(cdata->gpio);
+ }
+-
+- /* restore CTRL register */
+- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
+- /* disable GPIO mode */
+- ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
+ }
+
+ static int ath79_spi_setup(struct spi_device *spi)
+@@ -268,12 +271,15 @@ static int ath79_spi_probe(struct platfo
+ dev_dbg(&pdev->dev, "register read/write delay is %u nsecs\n",
+ sp->rrw_delay);
+
++ ath79_spi_enable(sp);
+ ret = spi_bitbang_start(&sp->bitbang);
+ if (ret)
+- goto err_clk_disable;
++ goto err_disable;
+
+ return 0;
+
++err_disable:
++ ath79_spi_disable(sp);
+ err_clk_disable:
+ clk_disable(sp->clk);
+ err_clk_put:
+@@ -292,6 +298,7 @@ static int ath79_spi_remove(struct platf
+ struct ath79_spi *sp = platform_get_drvdata(pdev);
+
+ spi_bitbang_stop(&sp->bitbang);
++ ath79_spi_disable(sp);
+ clk_disable(sp->clk);
+ clk_put(sp->clk);
+ iounmap(sp->base);
--- /dev/null
+From a32b0e7851320cba0144d20e87e5326ee81e1063 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Tue, 5 Feb 2013 20:57:55 +0100
+Subject: [PATCH] spi/ath79: add shutdown handler
+
+commit 7410e848583f9120dd5f9414629f01bb76b5ee5f upstream.
+
+The SPI controller of the AR7xxx/AR9xxx SoCs
+have a special mode which allows the SoC to
+directly read data from SPI flash chips. In
+this mode, the content of the SPI flash chip
+can be accessed via a memory mapped region.
+
+During early init time, the kernel expects
+that the flash chip is accessible through
+that memory region because it reads board
+specific values (e.g. MAC address, WiFi
+calibration data) from the flash on various
+boards.
+
+This is working if the kernel is loaded
+directly by the bootloader because that
+leaves the SPI controller in the special
+mode. However it is not working in a kexec'd
+kernel because the SPI driver does not restore
+the special mode during shutdown.
+
+The patch adds a shutdown handler to fix this
+issue.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+---
+ drivers/spi/spi-ath79.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -308,9 +308,15 @@ static int ath79_spi_remove(struct platf
+ return 0;
+ }
+
++static void ath79_spi_shutdown(struct platform_device *pdev)
++{
++ ath79_spi_remove(pdev);
++}
++
+ static struct platform_driver ath79_spi_driver = {
+ .probe = ath79_spi_probe,
+ .remove = ath79_spi_remove,
++ .shutdown = ath79_spi_shutdown,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+++ /dev/null
-From cbb3ade4765bc715b5c2eae4a7b6eaf3ff7ad958 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 11 Jan 2012 20:06:35 +0100
-Subject: [PATCH 28/34] spi/ath79: add delay between SCK changes
-
-The driver uses the "as fast as it can" approach
-to drive the SCK signal. However this does not
-work with certain low speed SPI chips (e.g. the
-PCF2123 RTC chip). Add per-bit slowdowns in order
-to be able to use the driver with such chips as
-well.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/spi/spi-ath79.c | 44 +++++++++++++++++++++++++++++++++++++++++++-
- 1 files changed, 43 insertions(+), 1 deletions(-)
-
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -24,17 +24,24 @@
- #include <linux/spi/spi_bitbang.h>
- #include <linux/bitops.h>
- #include <linux/gpio.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include <asm/mach-ath79/ath79_spi_platform.h>
-
- #define DRV_NAME "ath79-spi"
-
-+#define ATH79_SPI_RRW_DELAY_FACTOR 12000
-+#define MHZ (1000 * 1000)
-+
- struct ath79_spi {
- struct spi_bitbang bitbang;
- u32 ioc_base;
- u32 reg_ctrl;
- void __iomem *base;
-+ struct clk *clk;
-+ unsigned rrw_delay;
- };
-
- static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg)
-@@ -52,6 +59,12 @@ static inline struct ath79_spi *ath79_sp
- return spi_master_get_devdata(spi->master);
- }
-
-+static inline void ath79_spi_delay(struct ath79_spi *sp, unsigned nsecs)
-+{
-+ if (nsecs > sp->rrw_delay)
-+ ndelay(nsecs - sp->rrw_delay);
-+}
-+
- static void ath79_spi_chipselect(struct spi_device *spi, int is_active)
- {
- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
-@@ -184,7 +197,9 @@ static u32 ath79_spi_txrx_mode0(struct s
-
- /* setup MSB (to slave) on trailing edge */
- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
-+ ath79_spi_delay(sp, nsecs);
- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK);
-+ ath79_spi_delay(sp, nsecs);
-
- word <<= 1;
- }
-@@ -198,6 +213,7 @@ static int ath79_spi_probe(struct platfo
- struct ath79_spi *sp;
- struct ath79_spi_platform_data *pdata;
- struct resource *r;
-+ unsigned long rate;
- int ret;
-
- master = spi_alloc_master(&pdev->dev, sizeof(*sp));
-@@ -236,12 +252,36 @@ static int ath79_spi_probe(struct platfo
- goto err_put_master;
- }
-
-+ sp->clk = clk_get(&pdev->dev, "ahb");
-+ if (IS_ERR(sp->clk)) {
-+ ret = PTR_ERR(sp->clk);
-+ goto err_unmap;
-+ }
-+
-+ ret = clk_enable(sp->clk);
-+ if (ret)
-+ goto err_clk_put;
-+
-+ rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ);
-+ if (!rate) {
-+ ret = -EINVAL;
-+ goto err_clk_disable;
-+ }
-+
-+ sp->rrw_delay = ATH79_SPI_RRW_DELAY_FACTOR / rate;
-+ dev_dbg(&pdev->dev, "register read/write delay is %u nsecs\n",
-+ sp->rrw_delay);
-+
- ret = spi_bitbang_start(&sp->bitbang);
- if (ret)
-- goto err_unmap;
-+ goto err_clk_disable;
-
- return 0;
-
-+err_clk_disable:
-+ clk_disable(sp->clk);
-+err_clk_put:
-+ clk_put(sp->clk);
- err_unmap:
- iounmap(sp->base);
- err_put_master:
-@@ -256,6 +296,8 @@ static int ath79_spi_remove(struct platf
- struct ath79_spi *sp = platform_get_drvdata(pdev);
-
- spi_bitbang_stop(&sp->bitbang);
-+ clk_disable(sp->clk);
-+ clk_put(sp->clk);
- iounmap(sp->base);
- platform_set_drvdata(pdev, NULL);
- spi_master_put(sp->bitbang.master);
+++ /dev/null
-From bcb0fdebc08f828b54d0a2eb74a9d1378701a8e0 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 11 Jan 2012 20:33:41 +0100
-Subject: [PATCH 29/34] spi/ath79: add missing HIGH->LOW SCK transition
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/spi/spi-ath79.c | 2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -200,6 +200,8 @@ static u32 ath79_spi_txrx_mode0(struct s
- ath79_spi_delay(sp, nsecs);
- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK);
- ath79_spi_delay(sp, nsecs);
-+ if (bits == 1)
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
-
- word <<= 1;
- }
+++ /dev/null
-From 06752f9b169493cd1323f8337c147ad2dd31025c Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Mon, 9 Jan 2012 15:03:28 +0100
-Subject: [PATCH 30/34] spi/ath79: remove superfluous chip select code
-
-The spi_bitbang driver calls the chipselect function
-of the driver from spi_bitbang_setup in order to
-deselect the given SPI chip, so we don't have to
-initialize the CS line here.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/spi/spi-ath79.c | 6 ------
- 1 files changed, 0 insertions(+), 6 deletions(-)
-
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -128,12 +128,6 @@ static int ath79_spi_setup_cs(struct spi
- gpio_free(cdata->gpio);
- return status;
- }
-- } else {
-- if (spi->mode & SPI_CS_HIGH)
-- sp->ioc_base |= AR71XX_SPI_IOC_CS0;
-- else
-- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
-- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
- }
-
- return 0;
+++ /dev/null
-From 6bd876a46b977643f27d2cc63f49e1bc84b78134 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Mon, 9 Jan 2012 15:04:21 +0100
-Subject: [PATCH 31/34] spi/ath79: use gpio_request_one
-
-Use gpio_request_one() instead of multiple gpiolib calls.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/spi/spi-ath79.c | 26 +++++++++++++-------------
- 1 files changed, 13 insertions(+), 13 deletions(-)
-
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -100,6 +100,7 @@ static int ath79_spi_setup_cs(struct spi
- {
- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
- struct ath79_spi_controller_data *cdata;
-+ int status;
-
- cdata = spi->controller_data;
- if (spi->chip_select && !cdata)
-@@ -115,22 +116,21 @@ static int ath79_spi_setup_cs(struct spi
- /* TODO: setup speed? */
- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
-
-+ status = 0;
- if (spi->chip_select) {
-- int status = 0;
-+ unsigned long flags;
-
-- status = gpio_request(cdata->gpio, dev_name(&spi->dev));
-- if (status)
-- return status;
--
-- status = gpio_direction_output(cdata->gpio,
-- spi->mode & SPI_CS_HIGH);
-- if (status) {
-- gpio_free(cdata->gpio);
-- return status;
-- }
-+ flags = GPIOF_DIR_OUT;
-+ if (spi->mode & SPI_CS_HIGH)
-+ flags |= GPIOF_INIT_HIGH;
-+ else
-+ flags |= GPIOF_INIT_LOW;
-+
-+ status = gpio_request_one(cdata->gpio, flags,
-+ dev_name(&spi->dev));
- }
-
-- return 0;
-+ return status;
- }
-
- static void ath79_spi_cleanup_cs(struct spi_device *spi)
+++ /dev/null
-From e63ceaa0c4f7be0498cd452981073d3ce8e7d1f5 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Mon, 9 Jan 2012 15:00:46 +0100
-Subject: [PATCH 32/34] spi/ath79: avoid multiple initialization of the SPI controller
-
-Currently we are initializing the SPI controller in
-the chip select line function, and that function is
-called once for each SPI device on the bus. If a
-board has multiple SPI devices, the controller will
-be initialized multiple times.
-
-Introduce ath79_spi_{en,dis}able helper functions,
-and call those from probe/response in order to avoid
-the mutliple initialization of the controller.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/spi/spi-ath79.c | 41 ++++++++++++++++++++++++-----------------
- 1 files changed, 24 insertions(+), 17 deletions(-)
-
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -96,16 +96,8 @@ static void ath79_spi_chipselect(struct
-
- }
-
--static int ath79_spi_setup_cs(struct spi_device *spi)
-+static void ath79_spi_enable(struct ath79_spi *sp)
- {
-- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
-- struct ath79_spi_controller_data *cdata;
-- int status;
--
-- cdata = spi->controller_data;
-- if (spi->chip_select && !cdata)
-- return -EINVAL;
--
- /* enable GPIO mode */
- ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
-
-@@ -115,6 +107,24 @@ static int ath79_spi_setup_cs(struct spi
-
- /* TODO: setup speed? */
- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
-+}
-+
-+static void ath79_spi_disable(struct ath79_spi *sp)
-+{
-+ /* restore CTRL register */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
-+ /* disable GPIO mode */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
-+}
-+
-+static int ath79_spi_setup_cs(struct spi_device *spi)
-+{
-+ struct ath79_spi_controller_data *cdata;
-+ int status;
-+
-+ cdata = spi->controller_data;
-+ if (spi->chip_select && !cdata)
-+ return -EINVAL;
-
- status = 0;
- if (spi->chip_select) {
-@@ -135,17 +145,10 @@ static int ath79_spi_setup_cs(struct spi
-
- static void ath79_spi_cleanup_cs(struct spi_device *spi)
- {
-- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
--
- if (spi->chip_select) {
- struct ath79_spi_controller_data *cdata = spi->controller_data;
- gpio_free(cdata->gpio);
- }
--
-- /* restore CTRL register */
-- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
-- /* disable GPIO mode */
-- ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
- }
-
- static int ath79_spi_setup(struct spi_device *spi)
-@@ -268,12 +271,15 @@ static int ath79_spi_probe(struct platfo
- dev_dbg(&pdev->dev, "register read/write delay is %u nsecs\n",
- sp->rrw_delay);
-
-+ ath79_spi_enable(sp);
- ret = spi_bitbang_start(&sp->bitbang);
- if (ret)
-- goto err_clk_disable;
-+ goto err_disable;
-
- return 0;
-
-+err_disable:
-+ ath79_spi_disable(sp);
- err_clk_disable:
- clk_disable(sp->clk);
- err_clk_put:
-@@ -292,6 +298,7 @@ static int ath79_spi_remove(struct platf
- struct ath79_spi *sp = platform_get_drvdata(pdev);
-
- spi_bitbang_stop(&sp->bitbang);
-+ ath79_spi_disable(sp);
- clk_disable(sp->clk);
- clk_put(sp->clk);
- iounmap(sp->base);
+++ /dev/null
-From dab305def68a9ea28c1c0ca2fc20bba645944914 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 11 Jan 2012 22:19:32 +0100
-Subject: [PATCH 33/34] spi/ath79: add shutdown handler
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/spi/spi-ath79.c | 12 +++++++++++-
- 1 files changed, 11 insertions(+), 1 deletions(-)
-
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -308,9 +308,15 @@ static int ath79_spi_remove(struct platf
- return 0;
- }
-
-+static void ath79_spi_shutdown(struct platform_device *pdev)
-+{
-+ ath79_spi_remove(pdev);
-+}
-+
- static struct platform_driver ath79_spi_driver = {
- .probe = ath79_spi_probe,
- .remove = ath79_spi_remove,
-+ .shutdown = ath79_spi_shutdown,
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
projects / openwrt / staging / xback.git / commitdiff